Your message dated Wed, 8 May 2019 19:59:13 +0200 with message-id <20190508175913.GB7741@pisco.westfalen.local> and subject line Re: Bug#718825: linux-image-3.10-1-amd64: Sound freezes when using usb audio card has caused the Debian Bug report #718825, regarding linux-image-3.10-1-amd64: Sound freezes when using usb audio card to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 718825: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=718825 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.10-1-amd64: Sound freezes when using usb audio card
- From: Sergheu Mihai <serghei.mihai@devlibre.net>
- Date: Mon, 5 Aug 2013 23:30:26 +0200
- Message-id: <20130805233026.047e7dae.serghei.mihai@devlibre.net>
- Reply-to: Serghei MIHAI <serghei.mihai@devlibre.net>
Package: src:linux Version: 3.10.3-1 Severity: important Dear Maintainer, Since a couple on months, I'm using an external usb sound card(Scarlett Focusrite 2i2) for some audio production. I use it mainly with jackd, zynaddsubfx, fluidsynth. Constantly I face some sound freezes when using the card and the kernel reports me the following: [89828.051969] cannot submit urb (err = -18) [89828.051974] cannot submit urb (err = -18) [89828.051982] cannot submit urb (err = -18) [89828.051988] cannot submit urb (err = -18) Doing some researches on the Web I've found these threads: * http://comments.gmane.org/gmane.linux.usb.general/86939 * http://comments.gmane.org/gmane.linux.usb.general/85343 saying that it's related to a regression of usb-audio driver since the kernel 3.9 Running actually the version 3.10, which according to the above sources fixes the regression, I still have the bug. Does it mean that the issue is not fixed in the upstream? Or maybe it's another problem? I can provide more information if needded. Cheers, -- Package-specific info: ** Version: Linux version 3.10-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-6) ) #1 SMP Debian 3.10.3-1 (2013-07-27) ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.10-1-amd64 root=UUID=19d9b4f4-960a-4d0b-b223-3180496ee5f0 ro quiet splash ** Not tainted ** Kernel log: [89828.051969] cannot submit urb (err = -18) [89828.051974] cannot submit urb (err = -18) [89828.051982] cannot submit urb (err = -18) [89828.051988] cannot submit urb (err = -18) [89828.051993] cannot submit urb (err = -18) [89828.052000] cannot submit urb (err = -18) [89828.052007] cannot submit urb (err = -18) [89828.052014] cannot submit urb (err = -18) [89828.052021] cannot submit urb (err = -18) [89828.052025] cannot submit urb (err = -18) [89828.052033] cannot submit urb (err = -18) [89828.052040] cannot submit urb (err = -18) [89828.052046] cannot submit urb (err = -18) [89828.052052] cannot submit urb (err = -18) [89828.052060] cannot submit urb (err = -18) [89828.052068] cannot submit urb (err = -18) [89828.052076] cannot submit urb (err = -18) [89828.052083] cannot submit urb (err = -18) [89891.769398] cannot submit urb (err = -18) [89891.769408] cannot submit urb (err = -18) [89891.769418] cannot submit urb (err = -18) [89891.769425] cannot submit urb (err = -18) [89891.769432] cannot submit urb (err = -18) [89891.769436] cannot submit urb (err = -18) [89891.769444] cannot submit urb (err = -18) [89891.769451] cannot submit urb (err = -18) [89891.769456] cannot submit urb (err = -18) [89891.769462] cannot submit urb (err = -18) [89891.769470] cannot submit urb (err = -18) [89891.769477] cannot submit urb (err = -18) [89891.769484] cannot submit urb (err = -18) [89891.769488] cannot submit urb (err = -18) [89891.769498] cannot submit urb (err = -18) [89891.769505] cannot submit urb (err = -18) [89891.769519] cannot submit urb (err = -18) [89891.769527] cannot submit urb (err = -18) [89891.769535] cannot submit urb (err = -18) [89891.769543] cannot submit urb (err = -18) [90090.143768] retire_capture_urb: 13 callbacks suppressed [90119.285784] cannot submit urb (err = -18) [90119.285802] cannot submit urb (err = -18) [90119.285812] cannot submit urb (err = -18) [90119.285822] cannot submit urb (err = -18) [90119.285833] cannot submit urb (err = -18) [90119.285843] cannot submit urb (err = -18) [90119.285853] cannot submit urb (err = -18) [90119.285860] cannot submit urb (err = -18) [90119.285871] cannot submit urb (err = -18) [90119.285883] cannot submit urb (err = -18) [90119.285893] cannot submit urb (err = -18) [90119.285902] cannot submit urb (err = -18) [90119.285909] cannot submit urb (err = -18) [90119.285921] cannot submit urb (err = -18) [90119.285931] cannot submit urb (err = -18) [90119.285937] cannot submit urb (err = -18) [90119.285952] cannot submit urb (err = -18) [90119.285964] cannot submit urb (err = -18) [90119.285976] cannot submit urb (err = -18) [90119.285987] cannot submit urb (err = -18) [90160.545164] cannot submit urb (err = -18) [90160.545176] cannot submit urb (err = -18) [90160.545182] cannot submit urb (err = -18) [90160.545188] cannot submit urb (err = -18) [90160.545196] cannot submit urb (err = -18) [90160.545204] cannot submit urb (err = -18) [90160.545210] cannot submit urb (err = -18) [90160.545215] cannot submit urb (err = -18) [90160.545223] cannot submit urb (err = -18) [90160.545230] cannot submit urb (err = -18) [90160.545237] cannot submit urb (err = -18) [90160.545241] cannot submit urb (err = -18) [90160.545250] cannot submit urb (err = -18) [90160.545257] cannot submit urb (err = -18) [90160.545263] cannot submit urb (err = -18) [90160.545269] cannot submit urb (err = -18) [90160.545277] cannot submit urb (err = -18) [90160.545286] cannot submit urb (err = -18) [90160.545294] cannot submit urb (err = -18) [90160.545302] cannot submit urb (err = -18) [90451.200510] cannot submit urb (err = -18) [90451.200522] cannot submit urb (err = -18) [90451.200529] cannot submit urb (err = -18) [90451.200534] cannot submit urb (err = -18) [90451.200542] cannot submit urb (err = -18) [90451.200549] cannot submit urb (err = -18) [90451.200555] cannot submit urb (err = -18) [90451.200559] cannot submit urb (err = -18) [90451.200567] cannot submit urb (err = -18) [90451.200574] cannot submit urb (err = -18) [90451.200581] cannot submit urb (err = -18) [90451.200585] cannot submit urb (err = -18) [90451.200593] cannot submit urb (err = -18) [90451.200600] cannot submit urb (err = -18) [90451.200604] cannot submit urb (err = -18) [90451.200612] cannot submit urb (err = -18) [90451.200620] cannot submit urb (err = -18) [90451.200628] cannot submit urb (err = -18) [90451.200636] cannot submit urb (err = -18) [90451.200644] cannot submit urb (err = -18) [90757.387546] CE: hpet increased min_delta_ns to 20113 nsec ** Model information sys_vendor: TOSHIBA product_name: Satellite A100 product_version: PSAA9E-0QK03VFR chassis_vendor: No Enclosure chassis_version: N/A bios_vendor: Phoenix Technologies LTD bios_version: 6.00 board_vendor: Intel Corporation board_name: CAPELL VALLEY(NAPA) CRB board_version: Not Applicable ** Loaded modules: snd_hrtimer snd_seq_dummy cpufreq_powersave cpufreq_conservative cpufreq_userspace cpufreq_stats uinput nfsd auth_rpcgss oid_registry nfs_acl nfs lockd dns_resolver fscache sunrpc loop firewire_sbp2 fuse joydev hid_generic pcmcia usbhid hid coretemp iTCO_wdt iTCO_vendor_support snd_hda_codec_si3054 snd_hda_codec_realtek snd_hda_intel snd_usb_audio snd_hda_codec snd_usbmidi_lib snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm arc4 microcode tifm_7xx1 yenta_socket pcmcia_rsrc tifm_core pcmcia_core snd_seq_midi snd_seq_midi_event snd_page_alloc psmouse pcspkr serio_raw lpc_ich mfd_core snd_rawmidi rng_core i2c_i801 snd_seq iwl3945 acpi_cpufreq mperf iwlegacy mac80211 snd_seq_device snd_timer toshiba_acpi cfg80211 sparse_keymap snd rfkill battery ac processor evdev soundcore ext4 crc16 jbd2 mbcache sg sd_mod crc_t10dif sr_mod cdrom ata_generic sdhci_pci sdhci fan ata_piix nouveau libata video mxm_wmi wmi i2c_algo_bit firewire_ohci drm_kms_helper firewire_core crc_itu_t e100 mii mmc_core ttm drm thermal scsi_mod ehci_pci uhci_hcd ehci_hcd i2c_core thermal_sys button usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port [8086:27a1] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: cd000000-ceffffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: Toshiba America Info Systems Toshiba Satellite A100-796 audio (Realtek ALC861) [1179:ff10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at f0c00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- BusMaster+ DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: c4000000-c41fffff Prefetchable memory behind bridge: 00000000c4200000-00000000c43fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- BusMaster+ DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=04, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f0700000-f07fffff Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- BusMaster+ DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=06, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f0800000-f08fffff Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI]) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 1800 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI]) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 1820 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI]) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 1840 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI]) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at 1860 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI]) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f0c04000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- BusMaster+ DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=07, subordinate=0b, sec-latency=64 I/O behind bridge: 00004000-00004fff Memory behind bridge: f0900000-f09fffff Prefetchable memory behind bridge: 00000000c0000000-00000000c3ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] [8086:27c4] (rev 02) (prog-if 80 [Master]) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- BusMaster+ DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 Region 4: I/O ports at 18b0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 02) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 18c0 [size=32] 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G72M [Quadro NVS 110M/GeForce Go 7300] [10de:01d7] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- BusMaster+ DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at cd000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at ce000000 (64-bit, non-prefetchable) [size=16M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: nouveau 05:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) Subsystem: Intel Corporation Device [8086:1041] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at f0800000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: iwl3945 07:06.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039] Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at c8000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=07, secondary=08, subordinate=0b, sec-latency=176 Memory window 0: c0000000-c3ffffff (prefetchable) Memory window 1: f4000000-f7ffffff I/O window 0: 00004400-000044ff I/O window 1: 00004800-000048ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus 07:06.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a] (prog-if 10 [OHCI]) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 (500ns min, 1000ns max), Cache Line Size: 16 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at f0906000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at f0900000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 07:06.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b] Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 (1750ns min, 1000ns max), Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f0904000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: tifm_7xx1 07:06.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c] (prog-if 01) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 (1750ns min, 1000ns max), Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f0906800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci 07:08.0 Ethernet controller [0200]: Intel Corporation PRO/100 VE Network Connection [8086:1092] (rev 02) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at f0905000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 4000 [size=64] Capabilities: <access denied> Kernel driver in use: e100 ** USB devices: Bus 004 Device 002: ID 1235:8006 Novation EMS Focusrite Scarlett 2i2 Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 1d57:0008 Xenta Bus 003 Device 002: ID 0763:2028 Midiman Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: jessie/sid APT prefers unstable APT policy: (300, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 3.10-1-amd64 (SMP w/2 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.10-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.50 ii initramfs-tools [linux-initramfs-tool] 0.113 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.10-1-amd64 recommends: ii firmware-linux-free 3.2 Versions of packages linux-image-3.10-1-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.00-15 pn linux-doc-3.10 <none> Versions of packages linux-image-3.10-1-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> ii firmware-iwlwifi 0.39 pn firmware-libertas <none> pn firmware-linux <none> ii firmware-linux-nonfree 0.39 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.10-1-amd64/postinst/depmod-error-initrd-3.10-1-amd64: false linux-image-3.10-1-amd64/prerm/removing-running-kernel-3.10-1-amd64: true linux-image-3.10-1-amd64/postinst/ignoring-ramdisk: linux-image-3.10-1-amd64/postinst/missing-firmware-3.10-1-amd64: --- _____________________________________ / Serghei MIHAI \ | Email : serghei.mihai@devlibre.net | | Jabber : sergiu.mihai@devlibre.net | \ GPG key: 4096R/BF2FA1AF / ------------------------------------- \ \____ /@ ~-. \/ __ .- | // // @Attachment: signature.asc
Description: PGP signature
--- End Message ---
--- Begin Message ---
- To: Serghei MIHAI <serghei.mihai@devlibre.net>
- Cc: Steve Cotton <steve@s.cotton.clara.co.uk>, 718825-done@bugs.debian.org
- Subject: Re: Bug#718825: linux-image-3.10-1-amd64: Sound freezes when using usb audio card
- From: Moritz Mühlenhoff <jmm@inutil.org>
- Date: Wed, 8 May 2019 19:59:13 +0200
- Message-id: <20190508175913.GB7741@pisco.westfalen.local>
- In-reply-to: <20130911082600.6d6aa876.serghei.mihai@devlibre.net>
- References: <20130805233026.047e7dae.serghei.mihai@devlibre.net> <20130819112331.GA21486@s.cotton.clara.co.uk> <20130911082600.6d6aa876.serghei.mihai@devlibre.net>
Version: 3.11-1 On Wed, Sep 11, 2013 at 08:26:00AM +0200, Serghei MIHAI wrote: > Hi Steve, > > I installed and ran the kernel 3.11 a week ago and since the problem did not > appear. So I consider that it is fixed. Closing. Cheers, Moritz
--- End Message ---