Bug#927401: linux-image-4.9.0-8-amd64: fails to recognize properly every time the same sound device
Package: src:linux
Version: 4.9.144-3.1
Severity: normal
Dear Maintainer,
I am using a HiFimeDIY UAE23 USB DAC (ESS Sabre ES9023+Savitech SA9023) as the default sound output.
This device is using the driver "snd-usb-audio".
When I boot the system, it may or may not recognize the device properly, leading to have no sound anymore played on this output.
I set the device as default sink, using `pacmd set-default-sink 0`, where the pulseaudio index 0 is the USB DAC.
But when the machine boots with the device being in a bad state, the device name, vendor id and model id values change (while the id vendor id does not).
Unplugging and plugging it back solves the issue, because the device name, vendor id and model id values change back to proper ones.
I could provide a lot of outputs messages, but I tried to provide only the most relevant ones, let me know if you need more details.
Here is what `udevadm info` gives for both cases:
- Bad state:
-----------------------------------------------------------------
$ udevadm info -p /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/sound/card2
P: /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/sound/card2
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/sound/card2
E: ID_BUS=usb
E: ID_FOR_SEAT=sound-pci-0000_00_14_0-usb-0_3_1_1
E: ID_ID=usb-SAVITECH_Bravo-X_USB_Audio-01
E: ID_MODEL=Bravo-X_USB_Audio
E: ID_MODEL_ENC=Bravo-X\x20USB\x20Audio
E: ID_MODEL_ID=9023
E: ID_PATH=pci-0000:00:14.0-usb-0:3:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_1_1
E: ID_REVISION=0001
E: ID_SERIAL=SAVITECH_Bravo-X_USB_Audio
E: ID_TYPE=audio
E: ID_USB_DRIVER=snd-usb-audio
E: ID_USB_INTERFACES=:030000:010100:010200:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=SAVITECH
E: ID_VENDOR_ENC=SAVITECH
E: ID_VENDOR_ID=262a
E: SOUND_INITIALIZED=1
E: SUBSYSTEM=sound
E: SYSTEMD_WANTS=sound.target
E: TAGS=:seat:systemd:
E: USEC_INITIALIZED=5402460
-----------------------------------------------------------------
- Good state:
-----------------------------------------------------------------
$ udevadm info -p /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/sound/card2
P: /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/sound/card2
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/sound/card2
E: ID_BUS=usb
E: ID_FOR_SEAT=sound-pci-0000_00_14_0-usb-0_3_1_1
E: ID_ID=usb-HiFimeDIY_Audio_SA9023_USB_Audio-01
E: ID_MODEL=SA9023_USB_Audio
E: ID_MODEL_ENC=SA9023\x20USB\x20Audio
E: ID_MODEL_ID=10e0
E: ID_PATH=pci-0000:00:14.0-usb-0:3:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_1_1
E: ID_REVISION=0001
E: ID_SERIAL=HiFimeDIY_Audio_SA9023_USB_Audio
E: ID_TYPE=audio
E: ID_USB_DRIVER=snd-usb-audio
E: ID_USB_INTERFACES=:030000:010100:010200:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=HiFimeDIY_Audio
E: ID_VENDOR_ENC=HiFimeDIY\x20Audio
E: ID_VENDOR_ID=262a
E: SOUND_INITIALIZED=1
E: SUBSYSTEM=sound
E: SYSTEMD_WANTS=sound.target
E: TAGS=:seat:systemd:
E: USEC_INITIALIZED=5429778
-----------------------------------------------------------------
Hope I have been clear enough, do not hesitate to ask be go further into details if needed.
Best regards,
JB
-- Package-specific info:
** Version:
Linux version 4.9.0-8-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.144-3.1 (2019-02-19)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=UUID=4bd0920b-1e9e-412a-992d-b7392017d1a7 ro quiet
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[ 2.324331] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.324394] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.324447] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.331192] usb 2-1.8.2: device descriptor read/64, error -32
[ 2.345892] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 2.345894] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 2.345895] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 2.345896] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 2.356584] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 2.356593] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 2.371575] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC898: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 2.371580] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.371583] snd_hda_codec_realtek hdaudioC0D2: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.371585] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 2.371588] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0
[ 2.371589] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 2.371592] snd_hda_codec_realtek hdaudioC0D2: Mic=0x18
[ 2.371595] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
[ 2.392182] intel_rapl: Found RAPL domain package
[ 2.392184] intel_rapl: Found RAPL domain core
[ 2.398566] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 2.400081] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 2.400197] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 2.400292] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 2.400382] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 2.400470] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 2.400560] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 2.400641] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 2.404372] Adding 14151676k swap on /dev/sda2. Priority:-1 extents:1 across:14151676k SSFS
[ 2.406829] iTCO_vendor_support: vendor-support=0
[ 2.407307] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 2.407350] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.407470] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.442500] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.531219] usb 2-1.8.2: device descriptor read/64, error -32
[ 2.559386] clocksource: Switched to clocksource tsc
[ 2.563918] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.731205] usb 2-1.8.2: new full-speed USB device number 7 using ehci-pci
[ 2.827195] usb 2-1.8.2: device descriptor read/64, error -32
[ 3.027191] usb 2-1.8.2: device descriptor read/64, error -32
[ 3.043510] random: crng init done
[ 3.043512] random: 7 urandom warning(s) missed due to ratelimiting
[ 3.123742] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 3.123860] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 3.123974] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 3.124081] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 3.135043] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 3.135397] usb 2-1.8-port2: attempt power cycle
[ 3.211771] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 3.763201] usb 2-1.8.2: new full-speed USB device number 8 using ehci-pci
[ 4.179199] usb 2-1.8.2: device not accepting address 8, error -32
[ 4.271191] usb 2-1.8.2: new full-speed USB device number 9 using ehci-pci
[ 4.687228] usb 2-1.8.2: device not accepting address 9, error -32
[ 4.687594] usb 2-1.8-port2: unable to enumerate USB device
[ 4.779212] usb 2-1.8.3: new full-speed USB device number 10 using ehci-pci
[ 4.902850] usb 2-1.8.3: New USB device found, idVendor=046d, idProduct=c246
[ 4.902854] usb 2-1.8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.902856] usb 2-1.8.3: Product: G300s Optical Gaming Mouse
[ 4.902857] usb 2-1.8.3: Manufacturer: Logitech
[ 4.904980] input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.3/2-1.8.3:1.0/0003:046D:C246.0004/input/input19
[ 4.905269] hid-generic 0003:046D:C246.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:1d.0-1.8.3/input0
[ 4.909132] input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.3/2-1.8.3:1.1/0003:046D:C246.0005/input/input20
[ 4.955042] gnome-shell[669]: segfault at 44 ip 00007f482ba87291 sp 00007fffb5900020 error 4 in libmutter.so.0.0.0[7f482b9b1000+12c000]
[ 4.967511] hid-generic 0003:046D:C246.0005: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:1d.0-1.8.3/input1
[ 5.059230] usb 2-1.8.4: new low-speed USB device number 11 using ehci-pci
[ 5.196767] usb 2-1.8.4: New USB device found, idVendor=04d9, idProduct=2013
[ 5.196769] usb 2-1.8.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 5.196771] usb 2-1.8.4: Product: daskeyboard
[ 5.207056] input: daskeyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.4/2-1.8.4:1.0/0003:04D9:2013.0006/input/input21
[ 5.263543] hid-generic 0003:04D9:2013.0006: input,hidraw5: USB HID v1.10 Keyboard [daskeyboard] on usb-0000:00:1d.0-1.8.4/input0
[ 5.285128] input: daskeyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.4/2-1.8.4:1.1/0003:04D9:2013.0007/input/input22
[ 5.343399] hid-generic 0003:04D9:2013.0007: input,hidraw6: USB HID v1.10 Device [daskeyboard] on usb-0000:00:1d.0-1.8.4/input1
[ 5.390162] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/2-1.8.1:1.0/input/input23
[ 5.390252] usbcore: registered new interface driver xpad
[ 5.404571] usbcore: registered new interface driver snd-usb-audio
[ 5.458010] Bluetooth: Core ver 2.22
[ 5.458021] NET: Registered protocol family 31
[ 5.458021] Bluetooth: HCI device and connection manager initialized
[ 5.458024] Bluetooth: HCI socket layer initialized
[ 5.458026] Bluetooth: L2CAP socket layer initialized
[ 5.458029] Bluetooth: SCO socket layer initialized
[ 5.460547] usbcore: registered new interface driver btusb
[ 5.461411] usb 2-1.6: firmware: failed to load ath3k-1.fw (-2)
[ 5.461413] usb 2-1.6: Direct firmware load for ath3k-1.fw failed with error -2
[ 5.461415] Bluetooth: Firmware file "ath3k-1.fw" not found
[ 5.461420] ath3k: probe of 2-1.6:1.0 failed with error -2
[ 5.461456] usbcore: registered new interface driver ath3k
[ 6.584339] e1000e: enp4s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 6.584695] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[ 12.041775] vboxdrv: Found 8 processor cores
[ 12.059420] vboxdrv: TSC mode is Invariant, tentative frequency 3492055866 Hz
[ 12.059422] vboxdrv: Successfully loaded version 5.2.24_Debian (interface 0x00290001)
[ 12.064742] VBoxNetFlt: Successfully started.
[ 12.069450] VBoxNetAdp: Successfully started.
[ 12.074323] VBoxPciLinuxInit
[ 12.075339] vboxpci: IOMMU not found (not registered)
[ 12.418053] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.418055] Bluetooth: BNEP filters: protocol multicast
[ 12.418059] Bluetooth: BNEP socket layer initialized
[ 19.796175] fuse init (API version 7.26)
** Model information
sys_vendor: EVGA INTERNATIONAL CO.,LTD
product_name: E692 0.0
product_version: 0.0
chassis_vendor: EVGA INTERNATIONAL CO.,LTD
chassis_version: 0.0
bios_vendor: American Megatrends Inc.
bios_version: 4.6.5
board_vendor: EVGA INTERNATIONAL CO.,LTD
board_name: 151-IB-E692
board_version: 0.0
** Loaded modules:
fuse
bnep
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
joydev
ath3k
btusb
btrtl
btbcm
btintel
bluetooth
rfkill
snd_usb_audio
snd_usbmidi_lib
snd_rawmidi
snd_seq_device
xpad
ff_memless
cpufreq_powersave
cpufreq_conservative
cpufreq_userspace
binfmt_misc
iTCO_wdt
iTCO_vendor_support
mxm_wmi
snd_hda_codec_hdmi
intel_rapl
x86_pkg_temp_thermal
intel_powerclamp
coretemp
kvm_intel
snd_hda_codec_realtek
snd_hda_codec_generic
kvm
irqbypass
crct10dif_pclmul
crc32_pclmul
evdev
ghash_clmulni_intel
snd_hda_intel
intel_cstate
snd_hda_codec
snd_hda_core
intel_uncore
snd_hwdep
intel_rapl_perf
snd_pcm
serio_raw
pcspkr
sg
snd_timer
lpc_ich
mfd_core
snd
soundcore
mei_me
ie31200_edac
mei
shpchp
edac_core
wmi
video
button
nvidia_drm(PO)
drm_kms_helper
drm
nvidia_modeset(PO)
nvidia(PO)
ipmi_msghandler
parport_pc
ppdev
lp
parport
ip_tables
x_tables
autofs4
ext4
crc16
jbd2
crc32c_generic
fscrypto
ecb
mbcache
ata_generic
pata_marvell
hid_generic
usbhid
hid
sd_mod
crc32c_intel
aesni_intel
aes_x86_64
glue_helper
lrw
gf128mul
ablk_helper
ahci
cryptd
libahci
xhci_pci
psmouse
libata
e1000e
ehci_pci
i2c_i801
xhci_hcd
i2c_smbus
ehci_hcd
ptp
pps_core
scsi_mod
usbcore
usb_common
fan
thermal
** Network interface configuration:
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 00:1f:bc:0e:2c:b1 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.10/24 brd 192.168.1.255 scope global dynamic enp4s0
valid_lft 36935sec preferred_lft 36935sec
inet6 2a01:e35:2fd6:9880:7c:18cd:44bd:1859/64 scope global temporary dynamic
valid_lft 86038sec preferred_lft 79784sec
inet6 2a01:e35:2fd6:9880:21f:bcff:fe0e:2cb1/64 scope global mngtmpaddr noprefixroute dynamic
valid_lft 86038sec preferred_lft 86038sec
inet6 fe80::21f:bcff:fe0e:2cb1/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 1269336 25238 0 0 0 0 0 0 1269336 25238 0 0 0 0 0 0
enp4s0: 755850744 585528 0 0 0 0 0 871 9368800 76662 0 0 0 0 0 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller [8086:0150] (rev 09)
Subsystem: eVga.com. Corp. Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller [3842:1033]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: ivb_uncore
Kernel modules: ie31200_edac
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f6000000-f70fffff
Prefetchable memory behind bridge: 00000000e0000000-00000000f1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: eVga.com. Corp. 7 Series/C210 Series Chipset Family USB xHCI Host Controller [3842:1033]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f7400000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C216 Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: eVga.com. Corp. 7 Series/C216 Chipset Family MEI Controller [3842:1033]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 38
Region 0: Memory at f741a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: eVga.com. Corp. 7 Series/C216 Chipset Family USB Enhanced Host Controller [3842:1033]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7418000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: eVga.com. Corp. 7 Series/C216 Chipset Family High Definition Audio Controller [3842:1033]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 39
Region 0: Memory at f7410000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: f7300000-f73fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7200000-f72fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.6 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 7 [8086:1e1c] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f7100000-f71fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: eVga.com. Corp. 7 Series/C216 Chipset Family USB Enhanced Host Controller [3842:1033]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7417000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation Z77 Express Chipset LPC Controller [8086:1e44] (rev 04)
Subsystem: eVga.com. Corp. Z77 Express Chipset LPC Controller [3842:1033]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e02] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: eVga.com. Corp. 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] [3842:1033]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 29
Region 0: I/O ports at f070 [size=8]
Region 1: I/O ports at f060 [size=4]
Region 2: I/O ports at f050 [size=8]
Region 3: I/O ports at f040 [size=4]
Region 4: I/O ports at f020 [size=32]
Region 5: Memory at f7416000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C216 Chipset Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: eVga.com. Corp. 7 Series/C216 Chipset Family SMBus Controller [3842:1033]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7415000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GM204 [GeForce GTX 970] [10de:13c2] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. [MSI] GM204 [GeForce GTX 970] [1462:3160]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at e000 [size=128]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia
01:00.1 Audio device [0403]: NVIDIA Corporation GM204 High Definition Audio Controller [10de:0fbb] (rev a1)
Subsystem: Micro-Star International Co., Ltd. [MSI] GM204 High Definition Audio Controller [1462:3160]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f7080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
02:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller [1b21:1042] (prog-if 30 [XHCI])
Subsystem: Device [174c:2104]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7300000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II / PATA Controller [11ab:6121] (rev b2) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Marvell Technology Group Ltd. 88SE6121 SATA II / PATA Controller [11ab:6121]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at d040 [size=8]
Region 1: I/O ports at d030 [size=4]
Region 2: I/O ports at d020 [size=8]
Region 3: I/O ports at d010 [size=4]
Region 4: I/O ports at d000 [size=16]
Region 5: Memory at f7200000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: pata_marvell
Kernel modules: ahci, pata_marvell, ata_generic
04:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
Subsystem: Intel Corporation 82574L Gigabit Network Connection [8086:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f7100000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at c000 [size=32]
Region 3: Memory at f7120000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
** USB devices:
Bus 002 Device 011: ID 04d9:2013 Holtek Semiconductor, Inc. Keyboard [Das Keyboard]
Bus 002 Device 010: ID 046d:c246 Logitech, Inc. Gaming Mouse G300
Bus 002 Device 005: ID 045e:028e Microsoft Corp. Xbox360 Controller
Bus 002 Device 004: ID 2109:2812 VIA Labs, Inc. VL812 Hub
Bus 002 Device 003: ID 0cf3:3002 Qualcomm Atheros Communications AR3011 Bluetooth
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 2687:fb01
Bus 003 Device 002: ID 262a:9023
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 9.8
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.9.0-8-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.9.0-8-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.130
ii kmod 23-2
ii linux-base 4.5
Versions of packages linux-image-4.9.0-8-amd64 recommends:
ii firmware-linux-free 3.4
pn irqbalance <none>
Versions of packages linux-image-4.9.0-8-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta3-5+deb9u1
pn linux-doc-4.9 <none>
Versions of packages linux-image-4.9.0-8-amd64 is related to:
ii firmware-amd-graphics 20161130-4
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20161130-4
ii firmware-misc-nonfree 20161130-4
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: