--- Begin Message ---
Package: linux
Version: 4.19.12-1
Hello Everyone,
I tried the latest Buster Installer on my Fujitsu Q700 (rebranded
qnap ts-21x) and Everything works except that /dev/mtdblock* devices
are missing so flashing the kernel and initrd fails.
Regards,
Lukas Straub
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.19.0-1-marvell (debian-kernel@lists.debian.org) (gcc version 8.2.0 (Debian 8.2.0-12)) #1 Debian 4.19.12-1 (2018-12-22)
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] OF: fdt: Machine model: QNAP TS219 family
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] random: get_random_bytes called from start_kernel+0x78/0x4ac with crng_init=0
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/ram initrd=0xa00000,0x900000 ramdisk=32768
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 504484K/524288K available (3943K kernel code, 342K rwdata, 1032K rodata, 304K init, 218K bss, 19804K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (3945 kB)
[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) ( 304 kB)
[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 343 kB)
[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 219 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] ftrace: allocating 18837 entries in 37 pages
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[ 0.000008] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[ 0.000038] Switching to timer-based delay loop, resolution 5ns
[ 0.000128] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
[ 0.000150] pid_max: default: 32768 minimum: 301
[ 0.000420] Security Framework initialized
[ 0.000438] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.000542] AppArmor: AppArmor initialized
[ 0.000673] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000693] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001652] CPU: Testing write buffer coherency: ok
[ 0.002622] Setting up static identity map for 0x8200 - 0x823c
[ 0.002856] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3
[ 0.004650] devtmpfs: initialized
[ 0.007845] VFP support v0.3: not present
[ 0.007994] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.008019] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.008382] pinctrl core: initialized pinctrl subsystem
[ 0.009458] NET: Registered protocol family 16
[ 0.009839] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.010448] audit: initializing netlink subsys (disabled)
[ 0.011192] cpuidle: using governor ladder
[ 0.011208] cpuidle: using governor menu
[ 0.011538] Feroceon L2: Enabling L2
[ 0.011580] Feroceon L2: Cache support initialised.
[ 0.011809] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set
[ 0.015587] No ATAGs?
[ 0.016074] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1
[ 0.019974] clocksource: Switched to clocksource orion_clocksource
[ 0.041981] VFS: Disk quotas dquot_6.6.0
[ 0.042070] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.042509] AppArmor: AppArmor Filesystem Enabled
[ 0.043616] NET: Registered protocol family 2
[ 0.044345] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
[ 0.044374] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.044426] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.044476] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.044570] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.044593] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.044788] NET: Registered protocol family 1
[ 0.044818] PCI: CLS 0 bytes, default 32
[ 0.045040] Unpacking initramfs...
[ 1.023995] random: fast init done
[ 3.757700] Freeing initrd memory: 9216K
[ 3.758513] Initialise system trusted keyrings
[ 3.758685] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 3.763450] zbud: loaded
[ 3.765193] Key type asymmetric registered
[ 3.765205] Asymmetric key parser 'x509' registered
[ 3.765257] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 3.765428] io scheduler noop registered
[ 3.765678] io scheduler cfq registered (default)
[ 3.767160] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[ 3.768746] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00
[ 3.768765] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 3.768778] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[ 3.768789] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff]
[ 3.768871] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400
[ 3.769928] PCI: bus0: Fast back to back transfers disabled
[ 3.769943] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 3.770901] PCI: bus1: Fast back to back transfers enabled
[ 3.770917] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 3.771108] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 3.771625] mv_xor f1060800.xor: Marvell shared XOR driver
[ 3.800841] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 3.801008] mv_xor f1060900.xor: Marvell shared XOR driver
[ 3.828825] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 3.829179] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 3.830102] console [ttyS0] disabled
[ 3.830159] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 12500000) is a 16550A
[ 4.390438] console [ttyS0] enabled
[ 4.394499] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 28, base_baud = 12500000) is a 16550A
[ 4.404204] libphy: Fixed MDIO Bus: probed
[ 4.408342] i2c /dev entries driver
[ 4.413153] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.420142] registered taskstats version 1
[ 4.424279] Loading compiled-in X.509 certificates
[ 4.449399] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff'
[ 4.459032] AppArmor: AppArmor sha1 policy hashing enabled
[ 4.465725] hctosys: unable to open rtc device (rtc0)
[ 4.473454] Freeing unused kernel memory: 304K
[ 4.477944] This architecture does not have kernel memory protection.
[ 4.484426] Run /init as init process
[ 4.639228] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[ 4.745988] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 4.755931] libphy: orion_mdio_bus: probed
[ 4.795361] usbcore: registered new interface driver usbfs
[ 4.805575] SCSI subsystem initialized
[ 4.815754] mv643xx_eth_port mv643xx_eth_port.0: DMA mask not set
[ 4.844342] usbcore: registered new interface driver hub
[ 4.860694] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:08:9b:cc:dd:6c
[ 4.883719] usbcore: registered new device driver usb
[ 4.915471] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.928211] libata version 3.00 loaded.
[ 4.930567] sata_mv f1080000.sata: version 1.28
[ 4.930806] sata_mv f1080000.sata: slots 32 ports 2
[ 4.981000] ehci-orion: EHCI orion driver
[ 4.987914] scsi host0: sata_mv
[ 5.000076] orion-ehci f1050000.ehci: EHCI Host Controller
[ 5.007141] scsi host1: sata_mv
[ 5.016886] ata1: SATA max UDMA/133 irq 35
[ 5.021043] ata2: SATA max UDMA/133 irq 35
[ 5.033928] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[ 5.043909] orion-ehci f1050000.ehci: irq 32, io mem 0xf1050000
[ 5.063994] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[ 5.070279] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 5.078610] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.085882] usb usb1: Product: EHCI Host Controller
[ 5.090800] usb usb1: Manufacturer: Linux 4.19.0-1-marvell ehci_hcd
[ 5.097113] usb usb1: SerialNumber: f1050000.ehci
[ 5.104037] hub 1-0:1.0: USB hub found
[ 5.107841] hub 1-0:1.0: 1 port detected
[ 5.443996] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 5.605528] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=77.63
[ 5.613764] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5.620967] usb 1-1: Product: USB2.0 Hub
[ 5.631588] hub 1-1:1.0: USB hub found
[ 5.635788] hub 1-1:1.0: 4 ports detected
[ 5.864010] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[ 5.932036] ata1.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 5.938703] ata1.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 5.966305] ata1.00: configured for UDMA/133
[ 5.970949] scsi 0:0:0:0: Direct-Access ATA WDC WD15EADS-00P 0A01 PQ: 0 ANSI: 5
[ 6.452010] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[ 6.500035] ata2.00: ATA-8: WDC WD2500BPVT-80ZEST0, 01.01A01, max UDMA/133
[ 6.506959] ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 6.520442] ata2.00: configured for UDMA/133
[ 6.525081] scsi 1:0:0:0: Direct-Access ATA WDC WD2500BPVT-8 1A01 PQ: 0 ANSI: 5
[ 6.561223] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 6.574973] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 6.582538] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 6.590532] sd 0:0:0:0: [sda] Write Protect is off
[ 6.595390] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.595486] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.604649] sd 1:0:0:0: [sdb] Write Protect is off
[ 6.609482] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.609565] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.639188] sdb: sdb1
[ 6.643866] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 6.664502] sda: sda1
[ 6.669276] sd 0:0:0:0: [sda] Attached SCSI disk
[ 16.956117] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled
[ 16.956300] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
[ 18.473913] NET: Registered protocol family 17
[ 18.631879] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled
[ 18.740746] random: crng init done
BusyBox v1.27.2 (Debian 1:1.27.2-3) built-in shell (ash)
Enter 'help' for a list of built-in commands.
~ # ls /dev
block cpu_dma_latency gpiochip1 mem port sda1 stdout zero
bsg disk i2c-0 memory_bandwidth ptmx sdb tty
bus fd input network_latency pts sdb1 ttyS0
char full kmsg network_throughput random stderr ttyS1
console gpiochip0 log null sda stdin urandom
~ # lsmod
Module Size Used by
af_packet 32382 0
ext4 512803 0
crc16 1293 1 ext4
mbcache 4400 1 ext4
jbd2 79489 1 ext4
crc32c_generic 1945 0
fscrypto 17256 1 ext4
ecb 2171 0
sd_mod 32078 0
ehci_orion 3765 0
sata_mv 26054 0
ehci_hcd 53205 1 ehci_orion
libata 173264 1 sata_mv
evdev 11411 0
scsi_mod 174479 2 sd_mod,libata
usbcore 159141 2 ehci_orion,ehci_hcd
mvmdio 4528 0
mv643xx_eth 27840 0
usb_common 3755 1 usbcore
nls_base 5869 1 usbcore
gpio_keys 7758 0
sha256_generic 9524 0
~ # uname -a
Linux debian 4.19.0-1-marvell #1 Debian 4.19.12-1 (2018-12-22) armv5tel GNU/Linux
~ #
Jan 1 00:00:06 syslogd started: BusyBox v1.27.2
Jan 1 00:00:06 kernel: klogd started: BusyBox v1.27.2 (Debian 1:1.27.2-3)
Jan 1 00:00:06 kernel: [ 0.000000] Booting Linux on physical CPU 0x0
Jan 1 00:00:06 kernel: [ 0.000000] Linux version 4.19.0-1-marvell (debian-kernel@lists.debian.org) (gcc version 8.2.0 (Debian 8.2.0-12)) #1 Debian 4.19.12-1 (2018-12-22)
Jan 1 00:00:06 kernel: [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
Jan 1 00:00:06 kernel: [ 0.000000] CPU: VIVT data cache, VIVT instruction cache
Jan 1 00:00:06 kernel: [ 0.000000] OF: fdt: Machine model: QNAP TS219 family
Jan 1 00:00:06 kernel: [ 0.000000] Memory policy: Data cache writeback
Jan 1 00:00:06 kernel: [ 0.000000] On node 0 totalpages: 131072
Jan 1 00:00:06 kernel: [ 0.000000] Normal zone: 1024 pages used for memmap
Jan 1 00:00:06 kernel: [ 0.000000] Normal zone: 0 pages reserved
Jan 1 00:00:06 kernel: [ 0.000000] Normal zone: 131072 pages, LIFO batch:31
Jan 1 00:00:06 kernel: [ 0.000000] random: get_random_bytes called from start_kernel+0x78/0x4ac with crng_init=0
Jan 1 00:00:06 kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Jan 1 00:00:06 kernel: [ 0.000000] pcpu-alloc: [0] 0
Jan 1 00:00:06 kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048
Jan 1 00:00:06 kernel: [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/ram initrd=0xa00000,0x900000 ramdisk=32768
Jan 1 00:00:06 kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 1 00:00:06 kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 00:00:06 kernel: [ 0.000000] Memory: 504484K/524288K available (3943K kernel code, 342K rwdata, 1032K rodata, 304K init, 218K bss, 19804K reserved, 0K cma-reserved, 0K highmem)
Jan 1 00:00:06 kernel: [ 0.000000] Virtual kernel memory layout:
Jan 1 00:00:06 kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
Jan 1 00:00:06 kernel: [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
Jan 1 00:00:06 kernel: [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
Jan 1 00:00:06 kernel: [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
Jan 1 00:00:06 kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
Jan 1 00:00:06 kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
Jan 1 00:00:06 kernel: [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (3945 kB)
Jan 1 00:00:06 kernel: [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) ( 304 kB)
Jan 1 00:00:07 kernel: [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 343 kB)
Jan 1 00:00:07 kernel: [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 219 kB)
Jan 1 00:00:07 kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jan 1 00:00:07 kernel: [ 0.000000] ftrace: allocating 18837 entries in 37 pages
Jan 1 00:00:07 kernel: [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Jan 1 00:00:07 kernel: [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
Jan 1 00:00:07 kernel: [ 0.000008] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
Jan 1 00:00:07 kernel: [ 0.000038] Switching to timer-based delay loop, resolution 5ns
Jan 1 00:00:07 kernel: [ 0.000128] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
Jan 1 00:00:07 kernel: [ 0.000150] pid_max: default: 32768 minimum: 301
Jan 1 00:00:07 kernel: [ 0.000420] Security Framework initialized
Jan 1 00:00:07 kernel: [ 0.000438] Yama: disabled by default; enable with sysctl kernel.yama.*
Jan 1 00:00:07 kernel: [ 0.000542] AppArmor: AppArmor initialized
Jan 1 00:00:07 kernel: [ 0.000673] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 00:00:07 kernel: [ 0.000693] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 00:00:07 kernel: [ 0.001652] CPU: Testing write buffer coherency: ok
Jan 1 00:00:07 kernel: [ 0.002622] Setting up static identity map for 0x8200 - 0x823c
Jan 1 00:00:07 kernel: [ 0.002856] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3
Jan 1 00:00:07 kernel: [ 0.004650] devtmpfs: initialized
Jan 1 00:00:07 kernel: [ 0.007845] VFP support v0.3: not present
Jan 1 00:00:07 kernel: [ 0.007994] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Jan 1 00:00:07 kernel: [ 0.008019] futex hash table entries: 256 (order: -1, 3072 bytes)
Jan 1 00:00:07 kernel: [ 0.008382] pinctrl core: initialized pinctrl subsystem
Jan 1 00:00:07 kernel: [ 0.009458] NET: Registered protocol family 16
Jan 1 00:00:07 kernel: [ 0.009839] DMA: preallocated 256 KiB pool for atomic coherent allocations
Jan 1 00:00:07 kernel: [ 0.010448] audit: initializing netlink subsys (disabled)
Jan 1 00:00:07 kernel: [ 0.011192] cpuidle: using governor ladder
Jan 1 00:00:07 kernel: [ 0.011208] cpuidle: using governor menu
Jan 1 00:00:07 kernel: [ 0.011538] Feroceon L2: Enabling L2
Jan 1 00:00:07 kernel: [ 0.011580] Feroceon L2: Cache support initialised.
Jan 1 00:00:07 kernel: [ 0.011809] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set
Jan 1 00:00:07 kernel: [ 0.015587] No ATAGs?
Jan 1 00:00:07 kernel: [ 0.016074] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1
Jan 1 00:00:07 kernel: [ 0.019974] clocksource: Switched to clocksource orion_clocksource
Jan 1 00:00:07 kernel: [ 0.041981] VFS: Disk quotas dquot_6.6.0
Jan 1 00:00:07 kernel: [ 0.042070] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jan 1 00:00:07 kernel: [ 0.042509] AppArmor: AppArmor Filesystem Enabled
Jan 1 00:00:07 kernel: [ 0.043616] NET: Registered protocol family 2
Jan 1 00:00:07 kernel: [ 0.044345] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
Jan 1 00:00:07 kernel: [ 0.044374] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:07 kernel: [ 0.044426] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:07 kernel: [ 0.044476] TCP: Hash tables configured (established 4096 bind 4096)
Jan 1 00:00:07 kernel: [ 0.044570] UDP hash table entries: 256 (order: 0, 4096 bytes)
Jan 1 00:00:07 kernel: [ 0.044593] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Jan 1 00:00:07 kernel: [ 0.044788] NET: Registered protocol family 1
Jan 1 00:00:07 kernel: [ 0.044818] PCI: CLS 0 bytes, default 32
Jan 1 00:00:07 kernel: [ 0.045040] Unpacking initramfs...
Jan 1 00:00:07 kernel: [ 1.023995] random: fast init done
Jan 1 00:00:07 kernel: [ 3.757700] Freeing initrd memory: 9216K
Jan 1 00:00:07 kernel: [ 3.758513] Initialise system trusted keyrings
Jan 1 00:00:07 kernel: [ 3.758685] workingset: timestamp_bits=30 max_order=17 bucket_order=0
Jan 1 00:00:07 kernel: [ 3.763450] zbud: loaded
Jan 1 00:00:07 kernel: [ 3.765193] Key type asymmetric registered
Jan 1 00:00:07 kernel: [ 3.765205] Asymmetric key parser 'x509' registered
Jan 1 00:00:07 kernel: [ 3.765257] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
Jan 1 00:00:07 kernel: [ 3.765428] io scheduler noop registered
Jan 1 00:00:07 kernel: [ 3.765678] io scheduler cfq registered (default)
Jan 1 00:00:07 kernel: [ 3.767160] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
Jan 1 00:00:07 kernel: [ 3.768746] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00
Jan 1 00:00:07 kernel: [ 3.768765] pci_bus 0000:00: root bus resource [bus 00-ff]
Jan 1 00:00:07 kernel: [ 3.768778] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
Jan 1 00:00:07 kernel: [ 3.768789] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff]
Jan 1 00:00:07 kernel: [ 3.768871] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400
Jan 1 00:00:07 kernel: [ 3.769928] PCI: bus0: Fast back to back transfers disabled
Jan 1 00:00:07 kernel: [ 3.769943] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Jan 1 00:00:07 kernel: [ 3.770901] PCI: bus1: Fast back to back transfers enabled
Jan 1 00:00:07 kernel: [ 3.770917] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Jan 1 00:00:07 kernel: [ 3.771108] pci 0000:00:01.0: PCI bridge to [bus 01]
Jan 1 00:00:07 kernel: [ 3.771625] mv_xor f1060800.xor: Marvell shared XOR driver
Jan 1 00:00:07 kernel: [ 3.800841] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
Jan 1 00:00:07 kernel: [ 3.801008] mv_xor f1060900.xor: Marvell shared XOR driver
Jan 1 00:00:07 kernel: [ 3.828825] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
Jan 1 00:00:07 kernel: [ 3.829179] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Jan 1 00:00:07 kernel: [ 3.830102] console [ttyS0] disabled
Jan 1 00:00:07 kernel: [ 3.830159] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 12500000) is a 16550A
Jan 1 00:00:07 kernel: [ 4.390438] console [ttyS0] enabled
Jan 1 00:00:07 kernel: [ 4.394499] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 28, base_baud = 12500000) is a 16550A
Jan 1 00:00:07 kernel: [ 4.404204] libphy: Fixed MDIO Bus: probed
Jan 1 00:00:07 kernel: [ 4.408342] i2c /dev entries driver
Jan 1 00:00:07 kernel: [ 4.413153] ledtrig-cpu: registered to indicate activity on CPUs
Jan 1 00:00:07 kernel: [ 4.420142] registered taskstats version 1
Jan 1 00:00:07 kernel: [ 4.424279] Loading compiled-in X.509 certificates
Jan 1 00:00:07 kernel: [ 4.449399] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff'
Jan 1 00:00:07 kernel: [ 4.459032] AppArmor: AppArmor sha1 policy hashing enabled
Jan 1 00:00:07 kernel: [ 4.465725] hctosys: unable to open rtc device (rtc0)
Jan 1 00:00:07 kernel: [ 4.473454] Freeing unused kernel memory: 304K
Jan 1 00:00:07 kernel: [ 4.477944] This architecture does not have kernel memory protection.
Jan 1 00:00:07 kernel: [ 4.484426] Run /init as init process
Jan 1 00:00:07 kernel: [ 4.639228] input: gpio_keys as /devices/platform/gpio_keys/input/input0
Jan 1 00:00:07 kernel: [ 4.745988] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
Jan 1 00:00:07 kernel: [ 4.755931] libphy: orion_mdio_bus: probed
Jan 1 00:00:07 kernel: [ 4.795361] usbcore: registered new interface driver usbfs
Jan 1 00:00:07 kernel: [ 4.805575] SCSI subsystem initialized
Jan 1 00:00:07 kernel: [ 4.815754] mv643xx_eth_port mv643xx_eth_port.0: DMA mask not set
Jan 1 00:00:07 kernel: [ 4.844342] usbcore: registered new interface driver hub
Jan 1 00:00:07 kernel: [ 4.860694] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:08:9b:cc:dd:6c
Jan 1 00:00:07 kernel: [ 4.883719] usbcore: registered new device driver usb
Jan 1 00:00:07 kernel: [ 4.915471] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 1 00:00:07 kernel: [ 4.928211] libata version 3.00 loaded.
Jan 1 00:00:07 kernel: [ 4.930567] sata_mv f1080000.sata: version 1.28
Jan 1 00:00:07 kernel: [ 4.930806] sata_mv f1080000.sata: slots 32 ports 2
Jan 1 00:00:07 kernel: [ 4.981000] ehci-orion: EHCI orion driver
Jan 1 00:00:07 kernel: [ 4.987914] scsi host0: sata_mv
Jan 1 00:00:07 kernel: [ 5.000076] orion-ehci f1050000.ehci: EHCI Host Controller
Jan 1 00:00:07 kernel: [ 5.007141] scsi host1: sata_mv
Jan 1 00:00:07 kernel: [ 5.016886] ata1: SATA max UDMA/133 irq 35
Jan 1 00:00:07 kernel: [ 5.021043] ata2: SATA max UDMA/133 irq 35
Jan 1 00:00:07 kernel: [ 5.033928] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
Jan 1 00:00:07 kernel: [ 5.043909] orion-ehci f1050000.ehci: irq 32, io mem 0xf1050000
Jan 1 00:00:07 kernel: [ 5.063994] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
Jan 1 00:00:07 kernel: [ 5.070279] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
Jan 1 00:00:07 kernel: [ 5.078610] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 1 00:00:07 kernel: [ 5.085882] usb usb1: Product: EHCI Host Controller
Jan 1 00:00:07 kernel: [ 5.090800] usb usb1: Manufacturer: Linux 4.19.0-1-marvell ehci_hcd
Jan 1 00:00:07 kernel: [ 5.097113] usb usb1: SerialNumber: f1050000.ehci
Jan 1 00:00:07 kernel: [ 5.104037] hub 1-0:1.0: USB hub found
Jan 1 00:00:07 kernel: [ 5.107841] hub 1-0:1.0: 1 port detected
Jan 1 00:00:07 kernel: [ 5.443996] usb 1-1: new high-speed USB device number 2 using orion-ehci
Jan 1 00:00:07 kernel: [ 5.605528] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=77.63
Jan 1 00:00:07 kernel: [ 5.613764] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan 1 00:00:07 kernel: [ 5.620967] usb 1-1: Product: USB2.0 Hub
Jan 1 00:00:07 kernel: [ 5.631588] hub 1-1:1.0: USB hub found
Jan 1 00:00:07 kernel: [ 5.635788] hub 1-1:1.0: 4 ports detected
Jan 1 00:00:07 kernel: [ 5.864010] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
Jan 1 00:00:07 kernel: [ 5.932036] ata1.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
Jan 1 00:00:07 kernel: [ 5.938703] ata1.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Jan 1 00:00:07 kernel: [ 5.966305] ata1.00: configured for UDMA/133
Jan 1 00:00:07 kernel: [ 5.970949] scsi 0:0:0:0: Direct-Access ATA WDC WD15EADS-00P 0A01 PQ: 0 ANSI: 5
Jan 1 00:00:07 kernel: [ 6.452010] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
Jan 1 00:00:07 kernel: [ 6.500035] ata2.00: ATA-8: WDC WD2500BPVT-80ZEST0, 01.01A01, max UDMA/133
Jan 1 00:00:07 kernel: [ 6.506959] ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Jan 1 00:00:07 kernel: [ 6.520442] ata2.00: configured for UDMA/133
Jan 1 00:00:07 kernel: [ 6.525081] scsi 1:0:0:0: Direct-Access ATA WDC WD2500BPVT-8 1A01 PQ: 0 ANSI: 5
Jan 1 00:00:07 kernel: [ 6.561223] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
Jan 1 00:00:07 kernel: [ 6.574973] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
Jan 1 00:00:07 kernel: [ 6.582538] sd 1:0:0:0: [sdb] 4096-byte physical blocks
Jan 1 00:00:07 kernel: [ 6.590532] sd 0:0:0:0: [sda] Write Protect is off
Jan 1 00:00:07 kernel: [ 6.595390] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jan 1 00:00:07 kernel: [ 6.595486] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 1 00:00:07 kernel: [ 6.604649] sd 1:0:0:0: [sdb] Write Protect is off
Jan 1 00:00:07 kernel: [ 6.609482] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Jan 1 00:00:07 kernel: [ 6.609565] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 1 00:00:07 kernel: [ 6.639188] sdb: sdb1
Jan 1 00:00:07 kernel: [ 6.643866] sd 1:0:0:0: [sdb] Attached SCSI disk
Jan 1 00:00:07 kernel: [ 6.664502] sda: sda1
Jan 1 00:00:07 kernel: [ 6.669276] sd 0:0:0:0: [sda] Attached SCSI disk
Jan 1 00:00:10 preseed: successfully loaded preseed file from file:///preseed.cfg
Jan 1 00:00:13 init: starting pid 817, tty '': '/sbin/reopen-console /sbin/debian-installer'
Jan 1 00:00:13 debconf: Setting debconf/language to en
Jan 1 00:00:13 main-menu[833]: INFO: Menu item 'ethdetect' selected
Jan 1 00:00:14 net/hw-detect.hotplug: Detected hotpluggable network interface eth0
Jan 1 00:00:15 net/hw-detect.hotplug: Detected hotpluggable network interface lo
Jan 1 00:00:15 apt-install: Queueing package udev for later installation
Jan 1 00:00:15 apt-install: Queueing package pciutils for later installation
Jan 1 00:00:15 apt-install: Queueing package usbutils for later installation
Jan 1 00:00:15 hw-detect: Missing modules 'usb-storage (USB storage)
Jan 1 00:00:16 check-missing-firmware: looking at dmesg for the first time
Jan 1 00:00:16 check-missing-firmware: saving timestamp for a later use: [ 6.669276]
Jan 1 00:00:16 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping
Jan 1 00:00:16 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping
Jan 1 00:00:16 check-missing-firmware: no missing firmware in loaded kernel modules
Jan 1 00:00:16 check-missing-firmware: taking network interface -n up/down
Jan 1 00:00:16 check-missing-firmware: taking network interface eth0 up/down
Jan 1 00:00:16 kernel: [ 16.956117] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled
Jan 1 00:00:16 kernel: [ 16.956300] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
Jan 1 00:00:17 check-missing-firmware: looking at dmesg again, restarting from \[ 6.669276\]
Jan 1 00:00:18 check-missing-firmware: timestamp found, truncating dmesg accordingly
Jan 1 00:00:18 check-missing-firmware: saving timestamp for a later use: [ 16.956300]
Jan 1 00:00:18 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping
Jan 1 00:00:18 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping
Jan 1 00:00:18 check-missing-firmware: no missing firmware in loaded kernel modules
Jan 1 00:00:18 main-menu[833]: (process:861): ip: SIOCGIFFLAGS: No such device
Jan 1 00:00:18 main-menu[833]: (process:861): ip: SIOCGIFFLAGS: No such device
Jan 1 00:00:18 main-menu[833]: INFO: Menu item 'netcfg' selected
Jan 1 00:00:18 main-menu[833]: INFO: Falling back to the package description for crypto-modules-4.19.0-1-marvell-di
Jan 1 00:00:18 main-menu[833]: INFO: Falling back to the package description for crypto-modules-4.19.0-1-marvell-di
Jan 1 00:00:18 netcfg[1094]: INFO: Starting netcfg v.1.157
Jan 1 00:00:18 netcfg[1094]: WARNING **: Couldn't read Wpasupplicant pid file, not trying to kill.
Jan 1 00:00:18 netcfg[1094]: INFO: Could not find valid BOOTIF= entry in /proc/cmdline
Jan 1 00:00:18 netcfg[1094]: INFO: Taking down interface eth0
Jan 1 00:00:18 netcfg[1094]: INFO: Taking down interface lo
Jan 1 00:00:18 kernel: [ 18.473913] NET: Registered protocol family 17
Jan 1 00:00:18 netcfg[1094]: INFO: Activating interface eth0
Jan 1 00:00:18 netcfg[1094]: DEBUG: State is now 0
Jan 1 00:00:18 netcfg[1094]: DEBUG: Want link on eth0
Jan 1 00:00:18 netcfg[1094]: INFO: Waiting time set to 3
Jan 1 00:00:18 kernel: [ 18.631879] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled
Jan 1 00:00:18 kernel: [ 18.740746] random: crng init done
Jan 1 00:00:18 netcfg[1094]: INFO: ethtool-lite: eth0: carrier up
Jan 1 00:00:18 netcfg[1094]: INFO: Found link on eth0
Jan 1 00:00:18 netcfg[1094]: DEBUG: Commencing network autoconfiguration on eth0
Jan 1 00:00:18 netcfg[1094]: DEBUG: rdnssd started; PID: 1109
Jan 1 00:00:19 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Jan 1 00:00:19 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address
Jan 1 00:00:19 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Jan 1 00:00:19 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff
Jan 1 00:00:19 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Jan 1 00:00:19 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address
Jan 1 00:00:19 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Jan 1 00:00:19 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff
Jan 1 00:00:19 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Jan 1 00:00:19 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address
Jan 1 00:00:19 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Jan 1 00:00:19 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff
Jan 1 00:00:19 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Jan 1 00:00:19 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address
Jan 1 00:00:19 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Jan 1 00:00:19 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff
Jan 1 00:00:20 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Jan 1 00:00:20 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address
Jan 1 00:00:20 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Jan 1 00:00:20 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff
Jan 1 00:00:20 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Jan 1 00:00:20 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address
Jan 1 00:00:20 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Jan 1 00:00:20 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff
Jan 1 00:00:20 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Jan 1 00:00:20 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address
Jan 1 00:00:20 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Jan 1 00:00:20 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff
Jan 1 00:00:20 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Jan 1 00:00:20 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address
Jan 1 00:00:20 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Jan 1 00:00:20 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff
Jan 1 00:00:21 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Jan 1 00:00:21 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address
Jan 1 00:00:21 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Jan 1 00:00:21 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff
Jan 1 00:00:21 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Jan 1 00:00:21 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address
Jan 1 00:00:21 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Jan 1 00:00:21 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff
Jan 1 00:00:21 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Jan 1 00:00:21 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address
Jan 1 00:00:21 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Jan 1 00:00:21 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff
Jan 1 00:00:21 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Jan 1 00:00:21 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address
Jan 1 00:00:21 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Jan 1 00:00:21 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff
Jan 1 00:00:21 netcfg[1094]: INFO: No IPv6 support found... how does that happen?
Jan 1 00:00:21 netcfg[1094]: DEBUG: Stopping rdnssd, PID 1109
Jan 1 00:00:21 netcfg[1094]: DEBUG: No RA received; attempting IPv4 autoconfig
Jan 1 00:00:21 netcfg[1094]: WARNING **: Started DHCP client; PID is 1135
Jan 1 00:00:22 udhcpc: Got IP 192.168.223.15 (using eth0) and routing through 192.168.223.10
Jan 1 00:00:25 netcfg[1094]: DEBUG: Reading domain name returned via DHCP
Jan 1 00:00:25 netcfg[1094]: DEBUG: Reading nameservers from /etc/resolv.conf
Jan 1 00:00:25 netcfg[1094]: DEBUG: Read nameserver 192.168.223.10
Jan 1 00:00:25 netcfg[1094]: DEBUG: State is now 1
Jan 1 00:00:25 netcfg[1094]: DEBUG: State is now 2
Jan 1 00:00:25 netcfg[1094]: DEBUG: State is now 5
Jan 1 00:00:25 netcfg[1094]: DEBUG: Using DNS to try and obtain default hostname
Jan 1 00:00:25 netcfg[1094]: DEBUG: Getting default hostname from rDNS lookup of autoconfigured address 192.168.223.15
Jan 1 00:00:25 netcfg[1094]: DEBUG: getnameinfo() returned -2 (Name or service not known)
Jan 1 00:00:25 netcfg[1094]: DEBUG: State is now 6
Jan 1 00:00:25 netcfg[1094]: DEBUG: Network config complete
Jan 1 00:00:25 netcfg[1094]: DEBUG: No interface given; clearing /etc/network/interfaces
Jan 1 00:00:25 netcfg[1094]: DEBUG: Writing informative header
Jan 1 00:00:25 netcfg[1094]: DEBUG: Success!
Jan 1 00:00:25 netcfg[1094]: DEBUG: Writing loopback interface
Jan 1 00:00:25 netcfg[1094]: DEBUG: Success!
Jan 1 00:00:25 netcfg[1094]: DEBUG: Writing DHCP stanza for eth0
Jan 1 00:00:25 netcfg[1094]: INFO: Detected eth0 as a hotpluggable device
Jan 1 00:00:25 netcfg[1094]: DEBUG: Success!
Jan 1 00:00:26 main-menu[833]: (process:1093): udhcpc: started, v1.27.2
Jan 1 00:00:26 main-menu[833]: (process:1093): udhcpc: sending discover
Jan 1 00:00:26 main-menu[833]: (process:1093): udhcpc: sending select for 192.168.223.15
Jan 1 00:00:26 main-menu[833]: (process:1093): udhcpc: lease of 192.168.223.15 obtained, lease time 3600
Jan 1 00:00:26 main-menu[833]: INFO: Menu item 'network-console' selected
Jan 1 00:00:28 sshd[1200]: Server listening on 0.0.0.0 port 22.
Jan 1 00:00:28 apt-install: Queueing package openssh-server for later installation
Jan 1 00:01:15 sshd[1226]: Connection closed by 192.168.223.10 port 41012 [preauth]
Jan 1 00:01:28 sshd[1229]: Accepted password for installer from 192.168.223.10 port 41014 ssh2
Jan 1 00:01:28 sshd[1232]: lastlog_openseek: Couldn't stat /var/log/lastlog: No such file or directory
Jan 1 00:01:28 sshd[1232]: lastlog_openseek: Couldn't stat /var/log/lastlog: No such file or directory
Jan 1 00:01:29 debconf: Setting debconf/language to en
Jan 1 00:03:36 sshd[1229]: syslogin_perform_logout: logout() returned an error
Jan 1 00:03:36 sshd[1229]: Received disconnect from 192.168.223.10 port 41014:11: disconnected by user
Jan 1 00:03:36 sshd[1229]: Disconnected from user installer 192.168.223.10 port 41014
Jan 1 00:04:06 sshd[1258]: Accepted password for root from 192.168.223.10 port 41016 ssh2
Jan 1 00:04:07 sshd[1258]: Received disconnect from 192.168.223.10 port 41016:11: disconnected by user
Jan 1 00:04:07 sshd[1258]: Disconnected from user root 192.168.223.10 port 41016
Jan 1 00:04:28 sshd[1263]: Accepted password for root from 192.168.223.10 port 41018 ssh2
--- End Message ---
--- Begin Message ---
Source: linux
Source-Version: 4.19.20-1
We believe that the bug you reported is fixed in the latest version of
linux, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 920607@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Ben Hutchings <ben@decadent.org.uk> (supplier of updated linux package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@ftp-master.debian.org)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 1.8
Date: Mon, 11 Feb 2019 16:55:59 +0000
Source: linux
Binary: linux-doc-4.19 linux-headers-4.19.0-3-common linux-headers-4.19.0-3-common-rt linux-source-4.19 linux-support-4.19.0-3 lockdep
Architecture: all source
Version: 4.19.20-1
Distribution: unstable
Urgency: medium
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Changed-By: Ben Hutchings <ben@decadent.org.uk>
Description:
linux-doc-4.19 - Linux kernel specific documentation for version 4.19
linux-headers-4.19.0-3-common - Common header files for Linux 4.19.0-3
linux-headers-4.19.0-3-common-rt - Common header files for Linux 4.19.0-3-rt
linux-source-4.19 - Linux kernel source for version 4.19 with Debian patches
linux-support-4.19.0-3 - Support files for Linux 4.19
lockdep - Runtime locking correctness validator
Closes: 875621 882208 883023 903824 908860 912597 917388 917939 918036 918114 918331 918589 920607 920809 920866 921616
Changes:
linux (4.19.20-1) unstable; urgency=medium
.
* New upstream stable update:
https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.19.17
- tty/ldsem: Wake up readers after timed out down_write()
- tty: Hold tty_ldisc_lock() during tty_reopen()
- tty: Simplify tty->count math in tty_reopen()
- tty: Don't hold ldisc lock in tty_reopen() if ldisc present
- can: gw: ensure DLC boundaries after CAN frame modification
(CVE-2019-3701)
- netfilter: nf_conncount: don't skip eviction when age is negative
- netfilter: nf_conncount: split gc in two phases
- netfilter: nf_conncount: restart search when nodes have been erased
(Closes: #921616)
- netfilter: nf_conncount: merge lookup and add functions
- netfilter: nf_conncount: move all list iterations under spinlock
- netfilter: nf_conncount: speculative garbage collection on empty lists
- netfilter: nf_conncount: fix argument order to find_next_bit
- [arm64] mmc: sdhci-msm: Disable CDR function on TX
- Revert "scsi: target: iscsi: cxgbit: fix csk leak"
- scsi: target: iscsi: cxgbit: fix csk leak
- scsi: target: iscsi: cxgbit: fix csk leak
- [arm64] kvm: consistently handle host HCR_EL2 flags
- [arm64] Don't trap host pointer auth use to EL2
- ipv6: fix kernel-infoleak in ipv6_local_error()
- net: bridge: fix a bug on using a neighbour cache entry without checking
its state
- packet: Do not leak dev refcounts on error exit
- tcp: change txhash on SYN-data timeout
- tun: publish tfile after it's fully initialized
- r8169: don't try to read counters if chip is in a PCI power-save state
- bonding: update nest level on unlink
- ip: on queued skb use skb_header_pointer instead of pskb_may_pull
- r8169: load Realtek PHY driver module before r8169
- crypto: authencesn - Avoid twice completion call in decrypt path
- crypto: authenc - fix parsing key with misaligned rta_len
- [x86] xen: Fix x86 sched_clock() interface for xen
- Revert "btrfs: balance dirty metadata pages in btrfs_finish_ordered_io"
- btrfs: wait on ordered extents on abort cleanup
- Yama: Check for pid death before checking ancestry
- scsi: core: Synchronize request queue PM status only on successful resume
- [x86] scsi: sd: Fix cache_type_store()
- [mips*] fix n32 compat_ipc_parse_version
- [mips*] BCM47XX: Setup struct device for the SoC
- [mips*] lantiq: Fix IPI interrupt handling
- of: properties: add missing of_node_put
- RDMA/nldev: Don't expose unsafe global rkey to regular user
- [arm64] kaslr: ensure randomized quantities are clean to the PoC
- [arm64] dts: marvell: armada-ap806: reserve PSCI area
- [mips*] Disable MSI also when pcie-octeon.pcie_disable on
- fix int_sqrt64() for very large numbers
- media: vivid: fix error handling of kthread_run
- media: vivid: set min width/height to a value > 0
- bpf: in __bpf_redirect_no_mac pull mac only if present
- ipv6: make icmp6_send() robust against null skb->dev
- LSM: Check for NULL cred-security on free
- netfilter: ebtables: account ebt_table_info to kmemcg
- block: use rcu_work instead of call_rcu to avoid sleep in softirq
- selinux: fix GPF on invalid policy
- blockdev: Fix livelocks on loop device
- sctp: allocate sctp_sockaddr_entry with kzalloc
- tipc: fix uninit-value in in tipc_conn_rcv_sub
- tipc: fix uninit-value in tipc_nl_compat_link_reset_stats
- tipc: fix uninit-value in tipc_nl_compat_bearer_enable
- tipc: fix uninit-value in tipc_nl_compat_link_set
- tipc: fix uninit-value in tipc_nl_compat_name_table_dump
- tipc: fix uninit-value in tipc_nl_compat_doit
- block/loop: Don't grab "struct file" for vfs_getattr() operation.
- block/loop: Use global lock for ioctl() operation.
- loop: Fold __loop_release into loop_release
- loop: Get rid of loop_index_mutex
- loop: Push lo_ctl_mutex down into individual ioctls
- loop: Split setting of lo_state from loop_clr_fd
- loop: Push loop_ctl_mutex down into loop_clr_fd()
- loop: Push loop_ctl_mutex down to loop_get_status()
- loop: Push loop_ctl_mutex down to loop_set_status()
- loop: Push loop_ctl_mutex down to loop_set_fd()
- loop: Push loop_ctl_mutex down to loop_change_fd()
- loop: Move special partition reread handling in loop_clr_fd()
- loop: Move loop_reread_partitions() out of loop_ctl_mutex
- loop: Fix deadlock when calling blkdev_reread_part()
- loop: Avoid circular locking dependency between loop_ctl_mutex and
bd_mutex
- loop: Get rid of 'nested' acquisition of loop_ctl_mutex
- loop: Fix double mutex_unlock(&loop_ctl_mutex) in loop_control_ioctl()
- loop: drop caches if offset or block_size are changed
- drm/fb-helper: Ignore the value of fb_var_screeninfo.pixclock
- nbd: Use set_blocksize() to set device blocksize
https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.19.18
- ipv6: Consider sk_bound_dev_if when binding a socket to a v4 mapped
address
- [armhf, arm64 net: dsa: mv88x6xxx: mv88e6390 errata
- net, skbuff: do not prefer skb allocation fails early
- qmi_wwan: add MTU default to qmap network interface
- r8169: Add support for new Realtek Ethernet
- ipv6: Take rcu_read_lock in __inet6_bind for mapped addresses
- net: clear skb->tstamp in bridge forwarding path
- netfilter: ipset: Allow matching on destination MAC address for mac and
ipmac sets
- [arm64] gpio: pl061: Move irq_chip definition inside struct pl061
- drm/amd/display: Guard against null stream_state in set_crc_source
- [x86] drm/amdkfd: fix interrupt spin lock
- ixgbe: allow IPsec Tx offload in VEPA mode
- [x86] platform: asus-wmi: Tell the EC the OS will handle the display
off hotkey
- e1000e: allow non-monotonic SYSTIM readings
- [x86] usb: typec: tcpm: Do not disconnect link for self powered devices
- of: overlay: add missing of_node_put() after add new node to changeset
- writeback: don't decrement wb->refcnt if !wb->bdi
- serial: set suppress_bind_attrs flag only if builtin
- bpf: Allow narrow loads with offset > 0
- ALSA: oxfw: add support for APOGEE duet FireWire
- [x86] mce: Fix -Wmissing-prototypes warnings
- [mips] SiByte: Enable swiotlb for SWARM, LittleSur and BigSur
- [arm64] perf: set suppress_bind_attrs flag to true
- drm/atomic-helper: Complete fake_commit->flip_done potentially earlier
- [arm64] clk: meson: meson8b: fix incorrect divider mapping in
cpu_scale_table
- samples: bpf: fix: error handling regarding kprobe_events
- usb: gadget: udc: renesas_usb3: add a safety connection way for
forced_b_device
- fpga: altera-cvp: fix probing for multiple FPGAs on the bus
- selinux: always allow mounting submounts
- ASoC: pcm3168a: Don't disable pcm3168a when CONFIG_PM defined
- scsi: qedi: Check for session online before getting iSCSI TLV data.
- drm/amdgpu: Reorder uvd ring init before uvd resume
- rxe: IB_WR_REG_MR does not capture MR's iova field
- efi/libstub: Disable some warnings for x86{,_64}
- jffs2: Fix use of uninitialized delayed_work, lockdep breakage
- clk: imx: make mux parent strings const
- pstore/ram: Do not treat empty buffers as valid
- media: uvcvideo: Refactor teardown of uvc on USB disconnect
- powerpc/xmon: Fix invocation inside lock region
- powerpc/pseries/cpuidle: Fix preempt warning
- media: firewire: Fix app_info parameter type in avc_ca{,_app}_info
- ASoC: use dma_ops of parent device for acp_audio_dma
- media: venus: core: Set dma maximum segment size
- staging: erofs: fix use-after-free of on-stack `z_erofs_vle_unzip_io'
- net: call sk_dst_reset when set SO_DONTROUTE
- scsi: target: use consistent left-aligned ASCII INQUIRY data
- scsi: target/core: Make sure that target_wait_for_sess_cmds() waits long
enough
- [arm64] kasan: Increase stack size for KASAN_EXTRA
- clk: imx6q: reset exclusive gates on init
- [arm64] Fix minor issues with the dcache_by_line_op macro
- bpf: relax verifier restriction on BPF_MOV | BPF_ALU
- mmc: atmel-mci: do not assume idle after atmci_request_end
- btrfs: volumes: Make sure there is no overlap of dev extents at mount
time
- btrfs: alloc_chunk: fix more DUP stripe size handling
- btrfs: fix use-after-free due to race between replace start and cancel
- btrfs: improve error handling of btrfs_add_link
- tty/serial: do not free trasnmit buffer page under port lock
- perf intel-pt: Fix error with config term "pt=0"
- perf tests ARM: Disable breakpoint tests 32-bit
- perf svghelper: Fix unchecked usage of strncpy()
- perf parse-events: Fix unchecked usage of strncpy()
- perf vendor events intel: Fix Load_Miss_Real_Latency on SKL/SKX
- netfilter: ipt_CLUSTERIP: check MAC address when duplicate config is set
- netfilter: ipt_CLUSTERIP: remove wrong WARN_ON_ONCE in netns exit routine
- netfilter: ipt_CLUSTERIP: fix deadlock in netns exit routine
- [x86] topology: Use total_cpus for max logical packages calculation
- dm crypt: use u64 instead of sector_t to store iv_offset
- dm kcopyd: Fix bug causing workqueue stalls
- perf stat: Avoid segfaults caused by negated options
- tools lib subcmd: Don't add the kernel sources to the include path
- dm snapshot: Fix excessive memory usage and workqueue stalls
- perf cs-etm: Correct packets swapping in cs_etm__flush()
- perf tools: Add missing sigqueue() prototype for systems lacking it
- perf tools: Add missing open_memstream() prototype for systems lacking it
- quota: Lock s_umount in exclusive mode for Q_XQUOTA{ON,OFF} quotactls.
- clocksource/drivers/integrator-ap: Add missing of_node_put()
- dm: Check for device sector overflow if CONFIG_LBDAF is not set
- Bluetooth: btusb: Add support for Intel bluetooth device 8087:0029
- ALSA: bebob: fix model-id of unit for Apogee Ensemble
- sysfs: Disable lockdep for driver bind/unbind files
- IB/usnic: Fix potential deadlock
- scsi: mpt3sas: fix memory ordering on 64bit writes
- scsi: smartpqi: correct lun reset issues
- ath10k: fix peer stats null pointer dereference
- scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown()
- scsi: megaraid: fix out-of-bound array accesses
- iomap: don't search past page end in iomap_is_partially_uptodate
- ocfs2: fix panic due to unrecovered local alloc
- mm/page-writeback.c: don't break integrity writeback on ->writepage()
error
- mm/swap: use nr_node_ids for avail_lists in swap_info_struct
- userfaultfd: clear flag if remap event not enabled
- mm, proc: be more verbose about unstable VMA flags in /proc/<pid>/smaps
- iwlwifi: mvm: Send LQ command as async when necessary
- Bluetooth: Fix unnecessary error message for HCI request completion
- ipmi: fix use-after-free of user->release_barrier.rda
- ipmi: msghandler: Fix potential Spectre v1 vulnerabilities
- ipmi: Prevent use-after-free in deliver_response
- ipmi:ssif: Fix handling of multi-part return messages
- ipmi: Don't initialize anything in the core until something uses it
https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.19.19
- amd-xgbe: Fix mdio access for non-zero ports and clause 45 PHYs
- net: bridge: Fix ethernet header pointer before check skb forwardable
- net: Fix usage of pskb_trim_rcsum
- net: phy: marvell: Errata for mv88e6390 internal PHYs
- net: phy: mdio_bus: add missing device_del() in mdiobus_register() error
handling
- net/sched: act_tunnel_key: fix memory leak in case of action replace
- net_sched: refetch skb protocol for each filter
- openvswitch: Avoid OOB read when parsing flow nlattrs
- vhost: log dirty page correctly
- net: ipv4: Fix memory leak in network namespace dismantle
- net/sched: cls_flower: allocate mask dynamically in fl_change()
- udp: with udp_segment release on error path
- ip6_gre: fix tunnel list corruption for x-netns
- erspan: build the header with the right proto according to erspan_ver
- net: phy: marvell: Fix deadlock from wrong locking
- ip6_gre: update version related info when changing link
- tcp: allow MSG_ZEROCOPY transmission also in CLOSE_WAIT state
- mei: me: mark LBG devices as having dma support
- mei: me: add denverton innovation engine device IDs
- USB: leds: fix regression in usbport led trigger
- USB: serial: simple: add Motorola Tetra TPG2200 device id
- USB: serial: pl2303: add new PID to support PL2303TB
- ceph: clear inode pointer when snap realm gets dropped by its inode
- ASoC: atom: fix a missing check of snd_pcm_lib_malloc_pages
- ASoC: rt5514-spi: Fix potential NULL pointer dereference
- ASoC: tlv320aic32x4: Kernel OOPS while entering DAPM standby mode
- clk: socfpga: stratix10: fix rate calculation for pll clocks
- clk: socfpga: stratix10: fix naming convention for the fixed-clocks
- inotify: Fix fd refcount leak in inotify_add_watch().
- ALSA: hda/realtek - Fix typo for ALC225 model
- ALSA: hda - Add mute LED support for HP ProBook 470 G5
- ARCv2: lib: memeset: fix doing prefetchw outside of buffer
- ARC: adjust memblock_reserve of kernel memory
- ARC: perf: map generic branches to correct hardware condition
- s390/mm: always force a load of the primary ASCE on context switch
- s390/early: improve machine detection
- s390/smp: fix CPU hotplug deadlock with CPU rescan
- misc: ibmvsm: Fix potential NULL pointer dereference
- char/mwave: fix potential Spectre v1 vulnerability
- [arm64] mmc: dw_mmc-bluefield: : Fix the license information
- [arm64] mmc: meson-gx: Free irq in release() callback
- staging: rtl8188eu: Add device code for D-Link DWA-121 rev B1
- tty: Handle problem if line discipline does not have receive_buf
- uart: Fix crash in uart_write and uart_put_char
- tty/n_hdlc: fix __might_sleep warning
- hv_balloon: avoid touching uninitialized struct page during tail onlining
- Drivers: hv: vmbus: Check for ring when getting debug info
- vgacon: unconfuse vc_origin when using soft scrollback
- CIFS: Fix possible hang during async MTU reads and writes
- CIFS: Fix credits calculations for reads with errors
- CIFS: Fix credit calculation for encrypted reads with errors
- CIFS: Do not reconnect TCP session in add_credits()
- smb3: add credits we receive from oplock/break PDUs
- Input: xpad - add support for SteelSeries Stratus Duo
- Input: input_event - provide override for sparc64
- Input: uinput - fix undefined behavior in uinput_validate_absinfo()
- acpi/nfit: Block function zero DSMs
- acpi/nfit: Fix command-supported detection
- scsi: ufs: Use explicit access size in ufshcd_dump_regs
- dm thin: fix passdown_double_checking_shared_status()
- dm crypt: fix parsing of extended IV arguments
- [x86] drm/amdgpu: Add APTX quirk for Lenovo laptop
- [x86] KVM: Fix single-step debugging
- [x86] KVM: Fix PV IPIs for 32-bit KVM host
- [x86] KVM: WARN_ONCE if sending a PV IPI returns a fatal error
- [x86] kvm: vmx: Use kzalloc for cached_vmcs12
- [x86] KVM/nVMX: Do not validate that posted_intr_desc_addr is page
aligned
- [x86] pkeys: Properly copy pkey state at fork()
- [x86] selftests/pkeys: Fork() to check for state being preserved
- [x86] kaslr: Fix incorrect i8254 outb() parameters
- [x86] entry/64/compat: Fix stack switching for XEN PV
- [arm64] irqchip/gic-v3-its: Align PCI Multi-MSI allocation on their size
- can: dev: __can_get_echo_skb(): fix bogous check for non-existing skb by
removing it
- can: bcm: check timer values before ktime conversion
- can: flexcan: fix NULL pointer exception during bringup
- vt: make vt_console_print() compatible with the unicode screen buffer
- vt: always call notifier with the console lock held
- vt: invoke notifier on screen size change
- [arm64] drm/meson: Fix atomic mode switching regression
- bpf: improve verifier branch analysis
- bpf: add per-insn complexity limit
- bpf: move {prev_,}insn_idx into verifier env
- bpf: move tmp variable into ax register in interpreter
- bpf: enable access to ax register also from verifier rewrite
- bpf: restrict map value pointer arithmetic for unprivileged
- bpf: restrict stack pointer arithmetic for unprivileged
- bpf: restrict unknown scalars of mixed signed bounds for unprivileged
- bpf: fix check_map_access smin_value test when pointer contains offset
- bpf: prevent out of bounds speculation on pointer arithmetic
(CVE-2019-7308)
- bpf: fix sanitation of alu op with pointer / scalar type from different
paths (CVE-2019-7308)
- bpf: fix inner map masking to prevent oob under speculation
- [s390*] smp: Fix calling smp_call_ipl_cpu() from ipl CPU
- nvmet-rdma: Add unlikely for response allocated check
- nvmet-rdma: fix null dereference under heavy load
- Revert "mm, memory_hotplug: initialize struct pages for the full memory
section"
- usb: dwc3: gadget: Clear req->needs_extra_trb flag on cleanup
- ide: fix a typo in the settings proc file name
- Input: input_event - fix the CONFIG_SPARC64 mixup
https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.19.20
- Fix "net: ipv4: do not handle duplicate fragments as overlapping"
- ipv6: sr: clear IP6CB(skb) on SRH ip4ip6 encapsulation
- ipvlan, l3mdev: fix broken l3s mode wrt local routes
- l2tp: copy 4 more bytes to linear part if necessary
- l2tp: fix reading optional fields of L2TPv3
- net: ip_gre: always reports o_key to userspace
- net: ip_gre: use erspan key field for tunnel lookup
- net/mlx4_core: Add masking for a few queries on HCA caps
- netrom: switch to sock timer API
- net/rose: fix NULL ax25_cb kernel panic
- net: set default network namespace in init_dummy_netdev()
- sctp: improve the events for sctp stream reset
- tun: move the call to tun_set_real_num_queues
- vhost: fix OOB in get_rx_bufs()
(CVE-2018-16880)
- net: ip6_gre: always reports o_key to userspace
- sctp: improve the events for sctp stream adding
- net/mlx5e: Allow MAC invalidation while spoofchk is ON
- ip6mr: Fix notifiers call on mroute_clean_tables()
- sctp: set chunk transport correctly when it's a new asoc
- sctp: set flow sport from saddr only when it's 0
- virtio_net: Don't enable NAPI when interface is down
- virtio_net: Don't call free_old_xmit_skbs for xdp_frames
- virtio_net: Fix not restoring real_num_rx_queues
- virtio_net: Fix out of bounds access of sq
- virtio_net: Don't process redirected XDP frames when XDP is disabled
- virtio_net: Use xdp_return_frame to free xdp_frames on destroying vqs
- virtio_net: Differentiate sk_buff and xdp_frame on freeing
- CIFS: Do not count -ENODATA as failure for query directory
- CIFS: Fix trace command logging for SMB2 reads and writes
- CIFS: Do not consider -ENODATA as stat failure for reads
- fs/dcache: Fix incorrect nr_dentry_unused accounting in
shrink_dcache_sb()
- iommu/vt-d: Fix memory leak in intel_iommu_put_resv_regions()
- NFS: Fix up return value on fatal errors in nfs_page_async_flush()
- [arm64] kaslr: ensure randomized quantities are clean also when kaslr is
off
- [arm64] Do not issue IPIs for user executable ptes
- [arm64] hyp-stub: Forbid kprobing of the hyp-stub
- [arm64] hibernate: Clean the __hyp_text to PoC after resume
- gpiolib: fix line event timestamps for nested irqs
- gpio: pcf857x: Fix interrupts on multiple instances
- gfs2: Revert "Fix loop in gfs2_rbm_find"
- [arm*] mmc: bcm2835: Fix DMA channel leak on probe error
- mmc: mediatek: fix incorrect register setting of hs400_cmd_int_delay
- ALSA: usb-audio: Add Opus #3 to quirks for native DSD support
- ALSA: hda/realtek - Fixed hp_pin no value
- IB/hfi1: Remove overly conservative VM_EXEC flag check
- [x86] platform: asus-nb-wmi: Map 0x35 to KEY_SCREENLOCK
- [x86] platform: asus-nb-wmi: Drop mapping of 0x33 and 0x34 scan codes
- mmc: sdhci-iproc: handle mmc_of_parse() errors during probe
- Btrfs: fix deadlock when allocating tree block during leaf/node split
- btrfs: On error always free subvol_name in btrfs_mount
- kernel/exit.c: release ptraced tasks before zap_pid_ns_processes
- mm/hugetlb.c: teach follow_hugetlb_page() to handle FOLL_NOWAIT
- oom, oom_reaper: do not enqueue same task twice
- mm,memory_hotplug: fix scan_movable_pages() for gigantic hugepages
- mm, oom: fix use-after-free in oom_kill_process
- mm: hwpoison: use do_send_sig_info() instead of force_sig()
- mm: migrate: don't rely on __PageMovable() of newpage after unlocking it
- of: Convert to using %pOFn instead of device_node.name
- of: overlay: add tests to validate kfrees from overlay removal
- of: overlay: add missing of_node_get() in __of_attach_node_sysfs
- of: overlay: use prop add changeset entry for property in new nodes
- of: overlay: do not duplicate properties from overlay for new nodes
- md/raid5: fix 'out of memory' during raid cache recovery
- cifs: Always resolve hostname before reconnecting
.
[ Luca Boccassi ]
* Do not generate linux-source-$ver stanza in debian/control if
source is set to disabled in debian/config/defines.
* linux-perf: explicitly disable the jvmti feature and shared library.
* Document pkg.linux.nosource in debian/README.source.
* [amd64] enable UIO_HV_GENERIC for Azure's VMBus access.
* [cloud-amd64] enable UIO for Azure's VMBus access, and VFIO for guests
running on an hypervisor that exposes a vIOMMU.
.
[ Ben Hutchings ]
* debian/rules.d, debian/rules.real: Restore build of userland headers for
tools
* debian/rules.d: Delete now-unused recursive makefiles
* debian/rules.d/tools/perf/Makefile: Delete redundant arch/profile checks
* debian/control: Add !pkg.linux.nokernel to qualification for compiler
build-deps
* [i386] debian/control: Fix cross-compiler build-dependency
* debian/README.source: Document how to run kconfigeditor2
* [armhf,arm64] serial: 8250: Disable SERIAL_8250_DEPRECATED_OPTIONS
* percpu: convert spin_lock_irq to spin_lock_irqsave (fixes boot failure with
alpha-generic flavour)
* debian/tests/python: Fix spurious failure due to misuse of stderr
* Update "Revert "objtool: Fix CONFIG_STACK_VALIDATION=y warning for ..."
to not duplicate the conditional warning/error
* Bump ABI to 3
* drivers/firmware: Enable FW_CFG_SYSFS as module (Closes: #882208)
* [arm64,armhf,ia64,riscv64,sparc64] udeb: Add usb-serial-modules
(Closes: #903824)
* [powerpc*,sparc64] udeb: Add nic-usb-modules
* [armhf,riscv64,s390x] udeb: Add cdrom-core-modules
* 9p: Enable NET_9P_XEN as module
* ACPI: Enable ACPI_TAD as module
* amd-xgbe: Enable AMD_XGBE_DCB
* ath9k: Enable ATH9K_CHANNEL_CONTEXT
* block: Enable BLK_DEV_ZONED (except armel/marvell)
* bluetooth: Enable BT_HCIUART_RTL; BT_HCIUART_NOKIA, BT_MTKUART as modules
* bnxt: Enable BNXT_DCB
* ethernet: Enable HINIC, ICE, LAN743X, LIQUIDIO_VF as modules
* can: Enable CAN_VXCAN, CAN_MCBA_USB, CAN_UCAN as modules
* dm: Enable DM_UNSTRIPED, DM_WRITECACHE, DM_ZONED as modules
* [arm64,armhf] drm: Enable DRM_PANEL_RASPBERRYPI_TOUCHSCREEN as module
* dvb-usb-v2: Enable DVB_USB_ZD1301 as module
* gnss: Enable GNSS, GNSS_SIRF_SERIAL, GNSS_UBX_SERIAL as modules
* gpio: Enable GPIO_EXAR, GPIO_PCI_IDIO_16, GPIO_PCIE_IDIO_24 as modules
* HID: Enable HID_ACCUTOUCH, HID_COUGAR, HID_ELAN, HID_ITE, HID_JABRA,
HID_MAYFLASH, HID_REDRAGON, HID_RETRODE, HID_STEAM, HID_UDRAW_PS3 as
modules
* [x86] i2c: Enable I2C_DESIGNWARE_BAYTRAIL
* IB: Enable CGROUP_RDMA (except armel/marvell)
* ieee802154: Enable IEEE802154_HWSIM as module
* inet: Enable INET_RAW_DIAG as module
* input: Enable INPUT_AXP20X_PEK as module
* IPMI: Enable IPMI_SSIF as module
* joystick: Enable JOYSTICK_PXRC as module
* media/rc: Enable IR_IMON_DECODER, IR_IMON_RAW as modules
* [x86] mfd: Enable INTEL_SOC_PMIC_BXTWC, INTEL_SOC_PMIC_CHTDC_TI as modules
* mlx5: Enable MLX5_FPGA, MLX5_CORE_IPOIB; MLXFW as module
* net: Enable BPF_STREAM_PARSER, XDP_SOCKETS (except armel/marvell)
(Closes: #908860); NET_FAILOVER, SMC, SMC_DIAG, VSOCKMON as modules
* net/phy: Enable LED_TRIGGER_PHY; CORTINA_PHY, DP83822_PHY, DP83TC811_PHY,
MARVELL_10G_PHY, MICROCHIP_T1_PHY, RENESAS_PHY, ROCKCHIP_PHY as modules
* net/sched: Enable NET_SCH_CBS, NET_SCH_ETF, NET_SCH_SKBPRIO, NET_EMATCH_IPT
as modules
* PCMCIA: Enable SCR24X as module
* [x86] pinctrl: Enable PINCTRL_CANNONLAKE, PINCTRL_CEDARFORK,
PINCTRL_DENVERTON, PINCTRL_GEMINILAKE, PINCTRL_ICELAKE, PINCTRL_LEWISBURG
* [x86] rmi4: Re-enable RMI4_CORE, RMI4_SMB as modules (Closes: #875621);
RMI4_F03, RMI4_F11, RMI4_F12, RMI4_F30, RMI4_F34, RMI4_F55
* xfrm: Enable XFRM_INTERFACE as module
* PCI: Enable PCI_PF_STUB as module
* ptp: Change PTP_1588_CLOCK_KVM from built-in to module
* random: Enable RANDOM_TRUST_CPU. This can be reverted using the kernel
parameter: random.trust_cpu=off
* SCSI: Enable QEDF, QEDI as modules
* serial: Enable SERIAL_8250_EXAR, USB_SERIAL_F8153X, USB_SERIAL_UPD78F0730
as modules
* sound: Enable SND_FIREWIRE_MOTU, SND_FIREFACE, SND_XEN_FRONTEND as modules
* [x86] sound: Enable SND_SOC_AMD_CZ_DA7219MX98357_MACH,
SND_SOC_AMD_CZ_RT5645_MACH, SND_SOC_INTEL_CHT_BSW_NAU8824_MACH,
SND_SOC_INTEL_BYT_CHT_DA7213_MACH, SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH,
SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH,
SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH,
SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH as modules
* thermal: Enable DEVFREQ_THERMAL, THERMAL_STATISTICS
* tpm: Enable TCG_TIS_SPI, TCG_VTPM_PROXY as modules
* usbtouchscreen: Enable TOUCHSCREEN_USB_EASYTOUCH
* watchdog: Enable WATCHDOG_PRETIMEOUT_GOV, WATCHDOG_PRETIMEOUT_GOV_NOOP,
WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP; WATCHDOG_PRETIMEOUT_GOV_PANIC,
WDAT_WDT as modules
* [x86] watchdog: Enable INTEL_MEI_WDT, NI903X_WDT, NIC7018_WDT as modules
* wireless: Enable MT76x0U, MT76x2E, MT76x2U, QTNFMAC_PEARL_PCIE as modules
(Closes: #918331)
* zram: Enable ZRAM_WRITEBACK, ZRAM_MEMORY_TRACKING
* udeb: Add scsi-nic-modules containing Chelsio and Qlogic iSCSI/FC drivers
.
[ Marcin Juszkiewicz ]
* [arm64] enable ARM_CCI_PMU so ARM_CCI400_PMU and ARM_CCI5xx_PMU options
get really enabled.
* [arm64] enable PCI_PRI, PCI_PASID as PCI can be behind IOMMU in servers.
* udeb: Add virtio-gpu into d-i to get graphical output in VM instances.
* [arm64] Enable ARM64_ERRATUM_843419 (Closes: #920866)
.
[ Salvatore Bonaccorso ]
* [x86] kvmclock: set offset for kvm unstable clock (Closes: #918036)
* kvm: fix kvm_ioctl_create_device() reference counting (CVE-2019-6974)
* [x86] KVM: work around leak of uninitialized stack contents
(CVE-2019-7222)
* [x86] KVM: nVMX: unconditionally cancel preemption timer in free_nested
(CVE-2019-7221)
* HID: debug: fix the ring buffer implementation (CVE-2019-3819)
.
[ Hideki Yamane ]
* [x86] Enable Touchpad support on Gemini Lake via CONFIG_PINCTRL_GEMINILAKE
(Closes: #917388)
* [x86] Enable SND_SOC_ES8316 and Baytrail & Cherrytrail with ES8316 codec,
too (Closes: #918589)
* hwmon: Enable CONFIG_SENSORS_NCT7802,NCT7904,NPCM7XX,ASPEED and W83773G
to use HWMON hardware (Closes: #912597)
* net: can: Enable CONFIG_CAN_PEAK_PCIEFD for a PCI express CAN Bus adapter
(Closes: #920809)
* [armhf] Enable CONFIG_SENSORS_LM75 for armhf (Closes: #918114)
* [armhf] Enable CONFIG_IMX_THERMAL for armhf (Closes: #883023)
* [arm64] Enable CONFIG_ARM_ARMADA_37XX_CPUFREQ for arm64 (Closes: #917939)
.
[ Vagrant Cascadian ]
* [armhf] Enable CONFIG_MMC_SDHCI_OMAP=m, used on DRA7 and related SoCs.
.
[ Uwe Kleine-König ]
* [armel] add spi-orion to mtd.udeb to be able to access spi flash on e.g.
qnap ts-21x. (Closes: #920607)
Checksums-Sha1:
5b98e8951305dbedefa25ef8bd6065b2c6ba08df 190493 linux_4.19.20-1.dsc
8ced9a9932ec90db40dce74e7c1f25f6c0a21a51 107151480 linux_4.19.20.orig.tar.xz
a63468580e444783447fd0e0fe8f6798ad2d3ffb 1118360 linux_4.19.20-1.debian.tar.xz
eb332d58c7983d640872841411af9aea5b19b518 47890 linux_4.19.20-1_source.buildinfo
765be7802c812ce63078edb7bc209750761fb3cd 17897072 linux-doc-4.19_4.19.20-1_all.deb
a71aba61278698c82964544453e3b88709e4b5e0 6365460 linux-headers-4.19.0-3-common-rt_4.19.20-1_all.deb
471f0ade7c86606e963f170cd8df6e35442a4199 8141404 linux-headers-4.19.0-3-common_4.19.20-1_all.deb
63146156e56577108ce464eaa083f3b2ce73e560 106405288 linux-source-4.19_4.19.20-1_all.deb
917f8545e3b3f6806142b6cf2e642217230f1d63 270816 linux-support-4.19.0-3_4.19.20-1_all.deb
40808d7fec697cb8ef79ebb597d560baef90a983 223612 lockdep_4.19.20-1_all.deb
Checksums-Sha256:
9ec41b6203948a2a336e40f9f1ebb4d6ec93786266b34106da11d2314d6b07c1 190493 linux_4.19.20-1.dsc
f01ac2719d7b9b4fc18f2809cad715cb30c5377f9e1c3bd3e896e9a31dbdd77b 107151480 linux_4.19.20.orig.tar.xz
c869bee37dda8f6ff4fa513b17624585591241d586de249dcd2fbe4d12d2709e 1118360 linux_4.19.20-1.debian.tar.xz
acaf490d1bdbaad91a3e6184b9334152cbe1ac4b6e6742938bb2c623762f2ae6 47890 linux_4.19.20-1_source.buildinfo
2da91f43834da3939868728181d62ebe8f3d9ba793be02e9b50333acbe775d98 17897072 linux-doc-4.19_4.19.20-1_all.deb
8da30d7ce3dc49058d0b12520291859f9ea0ff526ed28846648f9c5728c0dc50 6365460 linux-headers-4.19.0-3-common-rt_4.19.20-1_all.deb
163278b92851db90bd66a7406f0047147fdd98767425a5391d0a2d4eaa5b5f83 8141404 linux-headers-4.19.0-3-common_4.19.20-1_all.deb
73311bd39c2c652617adfa40460d7fd9e0a75df76676418adb006808f2839080 106405288 linux-source-4.19_4.19.20-1_all.deb
9955e2ce964699521f8f70b2867f82e20da895a579d446db0e4678815d9b0ff6 270816 linux-support-4.19.0-3_4.19.20-1_all.deb
1d78366a6f1946ca3128a8edf8f758e60f15861d1390a5aa8b3b1a361028d219 223612 lockdep_4.19.20-1_all.deb
Files:
7f01bd694bb89f033461d2b3a70c4caa 190493 kernel optional linux_4.19.20-1.dsc
e7283e483bf72bd0639955154cc99154 107151480 kernel optional linux_4.19.20.orig.tar.xz
36212de18adcb53ebc27d52ab4c4a625 1118360 kernel optional linux_4.19.20-1.debian.tar.xz
e817a6cf310ce028c97bfe3b37688ce5 47890 kernel optional linux_4.19.20-1_source.buildinfo
f1ab05d71dc1864931b45d5d8c7b7e82 17897072 doc optional linux-doc-4.19_4.19.20-1_all.deb
59d24d2f8dc257a602f6c22cac415e8a 6365460 kernel optional linux-headers-4.19.0-3-common-rt_4.19.20-1_all.deb
f521b7193c070188f3959af2e6d2dc42 8141404 kernel optional linux-headers-4.19.0-3-common_4.19.20-1_all.deb
c624ce773600b8e6b1376d0fb9e8f861 106405288 kernel optional linux-source-4.19_4.19.20-1_all.deb
5ec44f36ccff117f012d76ac556ab71d 270816 devel optional linux-support-4.19.0-3_4.19.20-1_all.deb
1c3bc6640dc3e299bce3f11e9617dfc8 223612 devel optional lockdep_4.19.20-1_all.deb
-----BEGIN PGP SIGNATURE-----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=sQge
-----END PGP SIGNATURE-----
--- End Message ---