Bug#908704: linux-image-4.18.0-1-amd64: Fix downgraded resolutions for Display Port
Package: src:linux
Version: 4.18.6-1
Severity: normal
Dear Maintainer,
Some High Resolution Screens are downgraded to full HD due to DP link
training failures.This problem can be easily solved by allowing retries
during DP link training.
If the hardware is capable of running at high resolution the
link will be properly calibrated after 2 o 3 attempts. If the hardware
cannot run at that resolution the link will be downgraded in less than a
second.
The proposed patch is self contained and has been tested successfuly on
4 different kernels (4.15 - 4.18).
This bug has been replicated on multiple devices and screens and
notified to upstream: https://bugs.freedesktop.org/show_bug.cgi?id=106223
Unfortunately it is considered low-priority for Intel (but high-annoying
by the users).
Hopefully this patch will allow users to make full use of their screens
and I will spend less time rebuilding my kernel.
-- Package-specific info:
** Version:
Linux version 4.18.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-29)) #1 SMP Debian 4.18.6-1 (2018-09-06)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.18.0-1-amd64 root=UUID=4ac4c7fd-7b0a-4fc0-a4aa-e063d18bfe9f ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 3.828853] usb 1-3.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.828854] usb 1-3.1.1: Product: Lenovo USB Optical Mouse
[ 3.828855] usb 1-3.1.1: Manufacturer: PixArt
[ 3.956542] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 3.956546] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.956549] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 3.956550] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 3.956552] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 3.956554] snd_hda_codec_realtek hdaudioC0D0: Mic=0x12
[ 3.964026] usb 1-3.1.2: new low-speed USB device number 9 using xhci_hcd
[ 4.122473] usb 1-3.1.2: New USB device found, idVendor=04b3, idProduct=3025, bcdDevice= 1.02
[ 4.122480] usb 1-3.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.122484] usb 1-3.1.2: Product: USB NetVista Full Width Keyboard
[ 4.122488] usb 1-3.1.2: Manufacturer: CHICONY
[ 4.233894] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 4.234952] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 4.235066] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 4.235176] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 4.235283] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 4.235389] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 4.235493] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[ 4.436110] media: Linux media interface: v0.10
[ 4.446085] videodev: Linux video capture interface: v2.00
[ 4.453678] uvcvideo: Found UVC 1.00 device XiaoMi USB 2.0 Webcam (05c8:03a2)
[ 4.462195] Bluetooth: Core ver 2.22
[ 4.462204] NET: Registered protocol family 31
[ 4.462205] Bluetooth: HCI device and connection manager initialized
[ 4.462208] Bluetooth: HCI socket layer initialized
[ 4.462209] Bluetooth: L2CAP socket layer initialized
[ 4.462213] Bluetooth: SCO socket layer initialized
[ 4.465409] usbcore: registered new interface driver btusb
[ 4.466339] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[ 4.467345] Bluetooth: hci0: Device revision is 16
[ 4.467346] Bluetooth: hci0: Secure boot is enabled
[ 4.467347] Bluetooth: hci0: OTP lock is enabled
[ 4.467347] Bluetooth: hci0: API lock is enabled
[ 4.467348] Bluetooth: hci0: Debug lock is disabled
[ 4.467349] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 4.468378] bluetooth hci0: firmware: direct-loading firmware intel/ibt-12-16.sfi
[ 4.468381] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
[ 4.471474] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 4.471475] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized!
[ 4.471476] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[ 4.471477] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 4.471530] input: XiaoMi USB 2.0 Webcam: XiaoMi U as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input22
[ 4.471579] usbcore: registered new interface driver uvcvideo
[ 4.471579] USB Video Class driver (1.1.1)
[ 4.485825] ln0_1:0x0 ln2_3:0x0 align:0x80 sink:0x0 adj_req0_1:0xcc adj_req2_3:0x0
[ 4.485827] Clock recovery check failed, cannot continue channel equalization
[ 4.509735] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.509736] Bluetooth: BNEP filters: protocol multicast
[ 4.509738] Bluetooth: BNEP socket layer initialized
[ 5.478325] input: PixArt Lenovo USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1.1/1-3.1.1:1.0/0003:17EF:600E.0002/input/input23
[ 5.478406] hid-generic 0003:17EF:600E.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt Lenovo USB Optical Mouse] on usb-0000:00:14.0-3.1.1/input0
[ 5.481000] input: CHICONY USB NetVista Full Width Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1.2/1-3.1.2:1.0/0003:04B3:3025.0003/input/input24
[ 5.544287] hid-generic 0003:04B3:3025.0003: input,hidraw2: USB HID v1.10 Keyboard [CHICONY USB NetVista Full Width Keyboard] on usb-0000:00:14.0-3.1.2/input0
[ 5.544317] usbcore: registered new interface driver usbhid
[ 5.544317] usbhid: USB HID core driver
[ 6.008101] Bluetooth: hci0: Waiting for firmware download to complete
[ 6.008361] Bluetooth: hci0: Firmware loaded in 1506816 usecs
[ 6.008396] Bluetooth: hci0: Waiting for device to boot
[ 6.020360] Bluetooth: hci0: Device booted in 11693 usecs
[ 6.020482] bluetooth hci0: firmware: direct-loading firmware intel/ibt-12-16.ddc
[ 6.020484] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
[ 6.023404] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 6.076265] Bluetooth: RFCOMM TTY layer initialized
[ 6.076268] Bluetooth: RFCOMM socket layer initialized
[ 6.076271] Bluetooth: RFCOMM ver 1.11
[ 6.803174] ln0_1:0x0 ln2_3:0x0 align:0x80 sink:0x0 adj_req0_1:0xcc adj_req2_3:0x0
[ 6.803175] Clock recovery check failed, cannot continue channel equalization
[ 6.834651] ln0_1:0x0 ln2_3:0x0 align:0x80 sink:0x0 adj_req0_1:0xcc adj_req2_3:0x0
[ 6.834652] Clock recovery check failed, cannot continue channel equalization
[ 7.232871] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 8.297844] wlp2s0: authenticate with 78:11:dc:42:e1:3a
[ 8.307181] wlp2s0: send auth to 78:11:dc:42:e1:3a (try 1/3)
[ 8.315611] wlp2s0: authenticated
[ 8.316045] wlp2s0: associate with 78:11:dc:42:e1:3a (try 1/3)
[ 8.318061] wlp2s0: RX AssocResp from 78:11:dc:42:e1:3a (capab=0x11 status=0 aid=2)
[ 8.322322] wlp2s0: associated
[ 8.352912] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 11.973668] fuse init (API version 7.27)
[ 13.444898] rfkill: input handler disabled
[ 13.652922] kauditd_printk_skb: 14 callbacks suppressed
[ 13.652922] audit: type=1400 audit(1536783375.819:25): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1782 comm="apparmor_parser"
[ 13.727426] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 13.728635] Bridge firewalling registered
[ 13.860442] Initializing XFRM netlink socket
[ 13.956365] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[ 14.087103] ln0_1:0x0 ln2_3:0x0 align:0x80 sink:0x0 adj_req0_1:0xcc adj_req2_3:0x0
[ 14.087104] Clock recovery check failed, cannot continue channel equalization
[ 14.118649] ln0_1:0x0 ln2_3:0x0 align:0x80 sink:0x0 adj_req0_1:0xcc adj_req2_3:0x0
[ 14.118651] Clock recovery check failed, cannot continue channel equalization
[ 14.150443] ln0_1:0x0 ln2_3:0x0 align:0x80 sink:0x0 adj_req0_1:0xcc adj_req2_3:0x0
[ 14.150444] Clock recovery check failed, cannot continue channel equalization
[ 14.182042] ln0_1:0x0 ln2_3:0x0 align:0x80 sink:0x0 adj_req0_1:0xcc adj_req2_3:0x0
[ 14.182043] Clock recovery check failed, cannot continue channel equalization
[ 14.213483] ln0_1:0x0 ln2_3:0x0 align:0x80 sink:0x0 adj_req0_1:0xcc adj_req2_3:0x0
[ 14.213484] Clock recovery check failed, cannot continue channel equalization
[ 14.244932] ln0_1:0x0 ln2_3:0x0 align:0x80 sink:0x0 adj_req0_1:0xcc adj_req2_3:0x0
[ 14.244933] Clock recovery check failed, cannot continue channel equalization
** Model information
sys_vendor: Timi
product_name: TM1703
product_version: XMAKB3M0P0D0A
chassis_vendor: Timi
chassis_version: XMAKB3M0P0D0A
bios_vendor: Insyde Corp.
bios_version: XMAKB3M0P0D0A
board_vendor: Timi
board_name: TM1703
board_version: XMAKB3M0P0D0A
** Loaded modules:
ipt_MASQUERADE
nf_conntrack_netlink
nfnetlink
xfrm_user
xfrm_algo
iptable_nat
nf_conntrack_ipv4
nf_defrag_ipv4
nf_nat_ipv4
xt_addrtype
iptable_filter
xt_conntrack
nf_nat
nf_conntrack
libcrc32c
br_netfilter
bridge
stp
llc
overlay
fuse
ctr
ccm
cmac
rfcomm
usbhid
bnep
btusb
btrtl
btbcm
btintel
bluetooth
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
videobuf2_common
drbg
ansi_cprng
videodev
media
ecdh_generic
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_codec_generic
bbswitch(O)
arc4
snd_soc_skl
snd_soc_skl_ipc
snd_soc_sst_ipc
snd_soc_sst_dsp
snd_hda_ext_core
iwlmvm
snd_soc_acpi
msr
i915(O)
nls_ascii
joydev
nls_cp437
mac80211
intel_rapl
vfat
snd_soc_core
fat
snd_compress
snd_hda_intel
x86_pkg_temp_thermal
intel_powerclamp
snd_hda_codec
coretemp
dell_wmi_aio
iwlwifi
wmi_bmof
sparse_keymap
kvm_intel
snd_hda_core
kvm
irqbypass
efi_pstore
snd_hwdep
cfg80211
drm_kms_helper
crct10dif_pclmul
crc32_pclmul
snd_pcm
ghash_clmulni_intel
drm
snd_timer
intel_cstate
evdev
snd
mei_me
ucsi_acpi
intel_uncore
typec_ucsi
iTCO_wdt
intel_rapl_perf
serio_raw
pcspkr
iTCO_vendor_support
efivars
hid_multitouch
i2c_algo_bit
rfkill
soundcore
idma64
mei
typec
hp_wireless
battery
ac
tpm_crb
wmi
tpm_tis
tpm_tis_core
tpm
video
rng_core
button
acpi_pad
pcc_cpufreq
parport_pc
ppdev
lp
parport
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
hid_generic
crc32c_intel
ahci
aesni_intel
libahci
aes_x86_64
xhci_pci
crypto_simd
libata
cryptd
glue_helper
nvme
xhci_hcd
i2c_i801
nvme_core
usbcore
scsi_mod
intel_lpss_pci
i2c_hid
usb_common
intel_lpss
thermal
hid
** Network interface configuration:
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: wlp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 68:ec:c5:c6:25:28 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.102/24 brd 192.168.1.255 scope global dynamic noprefixroute wlp2s0
valid_lft 42755sec preferred_lft 42755sec
inet6 fd3d:3def:f3ee::57d/128 scope global noprefixroute
valid_lft forever preferred_lft forever
inet6 fd3d:3def:f3ee:0:2b45:5d06:bba6:9fdf/64 scope global noprefixroute
valid_lft forever preferred_lft forever
inet6 fe80::6d7a:5232:bc13:33c6/64 scope link noprefixroute
valid_lft forever preferred_lft forever
3: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default
link/ether 02:42:e9:d3:ff:e5 brd ff:ff:ff:ff:ff:ff
inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
docker0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlp2s0: 2394565 3149 0 0 0 0 0 0 532228 2009 0 0 0 0 0 0
lo: 6954 90 0 0 0 0 0 0 6954 90 0 0 0 0 0 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [8086:5914] (rev 08)
Subsystem: Xiaomi Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [1d72:1703]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation UHD Graphics 620 [8086:5917] (rev 07) (prog-if 00 [VGA controller])
Subsystem: Xiaomi UHD Graphics 620 [1d72:1703]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 137
Region 0: Memory at b2000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller [8086:9d2f] (rev 21) (prog-if 30 [XHCI])
Subsystem: Xiaomi Sunrise Point-LP USB 3.0 xHCI Controller [1d72:1703]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 126
Region 0: Memory at b4210000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:15.0 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 [8086:9d60] (rev 21)
Subsystem: Xiaomi Sunrise Point-LP Serial IO I2C Controller [1d72:1703]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at b422a000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:15.1 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1 [8086:9d61] (rev 21)
Subsystem: Xiaomi Sunrise Point-LP Serial IO I2C Controller [1d72:1703]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at b422b000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI #1 [8086:9d3a] (rev 21)
Subsystem: Xiaomi Sunrise Point-LP CSME HECI [1d72:1703]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 135
Region 0: Memory at b422c000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] [8086:9d03] (rev 21) (prog-if 01 [AHCI 1.0])
Subsystem: Xiaomi Sunrise Point-LP SATA Controller [AHCI mode] [1d72:1703]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 127
Region 0: Memory at b4228000 (32-bit, non-prefetchable) [size=8K]
Region 1: Memory at b422f000 (32-bit, non-prefetchable) [size=256]
Region 2: I/O ports at 4080 [size=8]
Region 3: I/O ports at 4088 [size=4]
Region 4: I/O ports at 4060 [size=32]
Region 5: Memory at b422d000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port [8086:9d10] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 122
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: b3000000-b3ffffff
Prefetchable memory behind bridge: 00000000a0000000-00000000b1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 [8086:9d14] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 123
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: b4100000-b41fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 [8086:9d18] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 124
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: b4000000-b40fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Intel(R) 100 Series Chipset Family LPC Controller/eSPI Controller - 9D4E [8086:9d4e] (rev 21)
Subsystem: Xiaomi Intel(R) 100 Series Chipset Family LPC Controller/eSPI Controller - 9D4E [1d72:1703]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC [8086:9d21] (rev 21)
Subsystem: Xiaomi Sunrise Point-LP PMC [1d72:1703]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at b4224000 (32-bit, non-prefetchable) [size=16K]
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD Audio [8086:9d71] (rev 21)
Subsystem: Xiaomi Sunrise Point-LP HD Audio [1d72:1703]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 138
Region 0: Memory at b4220000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at b4200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_soc_skl
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus [8086:9d23] (rev 21)
Subsystem: Xiaomi Sunrise Point-LP SMBus [1d72:1703]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at b422e000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 4040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 3D controller [0302]: NVIDIA Corporation GP108M [GeForce MX150] [10de:1d12] (rev ff) (prog-if ff)
!!! Unknown header type 7f
Kernel modules: nvidia
02:00.0 Network controller [0280]: Intel Corporation Wireless 8265 / 8275 [8086:24fd] (rev 78)
Subsystem: Intel Corporation Wireless 8265 / 8275 [8086:9010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 136
Region 0: Memory at b4100000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
03:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 [144d:a804] (prog-if 02 [NVM Express])
Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 [144d:a801]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at b4000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme
** USB devices:
Bus 002 Device 003: ID 2109:8110 VIA Labs, Inc. Hub
Bus 002 Device 002: ID 1d5c:5002
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 8087:0a2b Intel Corp.
Bus 001 Device 004: ID 04f3:0c1a Elan Microelectronics Corp.
Bus 001 Device 003: ID 05c8:03a2 Cheng Uei Precision Industry Co., Ltd (Foxlink)
Bus 001 Device 007: ID 1d5c:5100
Bus 001 Device 009: ID 04b3:3025 IBM Corp. NetVista Full Width Keyboard
Bus 001 Device 008: ID 17ef:600e Lenovo
Bus 001 Device 005: ID 2109:2811 VIA Labs, Inc. Hub
Bus 001 Device 002: ID 1d5c:5012
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: buster/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.18.0-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.18.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.132
ii kmod 25-1
ii linux-base 4.5
Versions of packages linux-image-4.18.0-1-amd64 recommends:
ii apparmor 2.13-8
ii firmware-linux-free 3.4
ii irqbalance 1.3.0-0.1+b1
Versions of packages linux-image-4.18.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.02+dfsg1-6
pn linux-doc-4.18 <none>
Versions of packages linux-image-4.18.0-1-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 20180825+dfsg-1
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20180825+dfsg-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: