Your message dated Tue, 24 Apr 2018 15:37:59 +0100 with message-id <bc618c010f2541b9151ff8f3b3672f54bdaaea80.camel@decadent.org.uk> and subject line Re: Bug#718196: linux-image-3.9-0.bpo.1-kirkwood: mv_cesa broken has caused the Debian Bug report #718196, regarding linux-image-3.9-0.bpo.1-kirkwood: mv_cesa broken to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 718196: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=718196 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.9-0.bpo.1-kirkwood: mv_cesa broken
- From: Christoph Egger <christoph@debian.org>
- Date: Sun, 28 Jul 2013 15:55:24 +0000
- Message-id: <20130728155524.3144.58460.reportbug@backup.siccegge.de>
Package: src:linux Version: 3.9.6-1~bpo70+1 Severity: normal Hi! The mv_cesa module seems to be broken (both in 3.2 stable kernel and 3.9). Symptoms: If I have mv_cesa loaded, do a cryptsetup open and then a pvscan it doesn't find any suitable volumes. If I unload mv_cesa before cryptsetup open, everything works fine. This *seems* to be a somewhat known problem but should be, as far as I understand, solved before 3.9 (which is the reason I tried 3.9). It is, however, still showing there as well. I'm trying the 3.10 kernel now Christoph -- Package-specific info: ** Version: Linux version 3.9-0.bpo.1-kirkwood (debian-kernel@lists.debian.org) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 Debian 3.9.6-1~bpo70+1 ** Command line: root=/dev/ram initrd=0xa00000,0x900000 ramdisk=34816 ** Not tainted ** Kernel log: [ 72.698194] [ 72.698265] [ 72.698336] [ 72.698408] [ 72.698479] [ 72.698553] [ 72.698657] [ 72.700871] [ 72.703237] [ 72.703449] [ 74.094157] udevd[447]: starting version 175 [ 74.651014] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 74.835844] usbcore: registered new interface driver usbfs [ 74.835949] usbcore: registered new interface driver hub [ 74.842620] usbcore: registered new device driver usb [ 74.909213] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 74.950312] xhci_hcd 0000:01:01.0: xHCI Host Controller [ 74.950385] xhci_hcd 0000:01:01.0: new USB bus registered, assigned bus number 1 [ 74.950808] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 74.950846] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 74.950874] usb usb1: Product: xHCI Host Controller [ 74.950897] usb usb1: Manufacturer: Linux 3.9-0.bpo.1-kirkwood xhci_hcd [ 74.950920] usb usb1: SerialNumber: 0000:01:01.0 [ 74.951409] xHCI xhci_add_endpoint called for root hub [ 74.951417] xHCI xhci_check_bandwidth called for root hub [ 74.951662] hub 1-0:1.0: USB hub found [ 74.951718] hub 1-0:1.0: 2 ports detected [ 74.952003] xhci_hcd 0000:01:01.0: xHCI Host Controller [ 74.952047] xhci_hcd 0000:01:01.0: new USB bus registered, assigned bus number 2 [ 74.952136] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 74.952167] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 74.952194] usb usb2: Product: xHCI Host Controller [ 74.952217] usb usb2: Manufacturer: Linux 3.9-0.bpo.1-kirkwood xhci_hcd [ 74.952240] usb usb2: SerialNumber: 0000:01:01.0 [ 74.954890] xHCI xhci_add_endpoint called for root hub [ 74.954900] xHCI xhci_check_bandwidth called for root hub [ 74.957249] hub 2-0:1.0: USB hub found [ 74.957323] hub 2-0:1.0: 2 ports detected [ 74.991892] ehci-orion: EHCI orion driver [ 75.073148] orion_wdt: Initial timeout 21 sec [ 75.073743] orion-ehci orion-ehci.0: EHCI Host Controller [ 75.073805] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 3 [ 75.073967] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 75.091216] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 75.091327] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 75.091359] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 75.091387] usb usb3: Product: EHCI Host Controller [ 75.091409] usb usb3: Manufacturer: Linux 3.9-0.bpo.1-kirkwood ehci_hcd [ 75.091433] usb usb3: SerialNumber: orion-ehci.0 [ 75.091858] hub 3-0:1.0: USB hub found [ 75.091906] hub 3-0:1.0: 1 port detected [ 75.411222] usb 3-1: new high-speed USB device number 2 using orion-ehci [ 75.562981] usb 3-1: New USB device found, idVendor=05e3, idProduct=0608 [ 75.563045] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 75.563072] usb 3-1: Product: USB2.0 Hub [ 75.564265] hub 3-1:1.0: USB hub found [ 75.564606] hub 3-1:1.0: 4 ports detected [ 76.539311] EXT4-fs (dm-1): re-mounted. Opts: (null) [ 76.856608] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 77.571414] loop: module loaded [ 79.684918] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 79.742391] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 79.801780] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 79.858010] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null) [ 81.417984] RPC: Registered named UNIX socket transport module. [ 81.418044] RPC: Registered udp transport module. [ 81.418067] RPC: Registered tcp transport module. [ 81.418088] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 81.447038] FS-Cache: Loaded [ 81.454311] Key type dns_resolver registered [ 81.507694] FS-Cache: Netfs 'nfs' registered for caching [ 81.585295] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 86.593205] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down [ 88.110251] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 88.122280] NFSD: starting 90-second grace period (net c0513db8) [ 89.327218] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 203.642744] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet spanning multiple descriptors [ 203.642783] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet spanning multiple descriptors [ 271.806746] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down [ 274.519522] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 437.735515] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet spanning multiple descriptors [ 437.735557] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet spanning multiple descriptors [ 455.638653] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet spanning multiple descriptors [ 455.638698] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet spanning multiple descriptors [ 519.603271] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet spanning multiple descriptors [ 519.603314] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet spanning multiple descriptors [ 569.880774] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet spanning multiple descriptors [ 569.880814] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet spanning multiple descriptors [ 796.913756] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down [ 799.730805] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 879.019458] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down [ 881.977946] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 935.236218] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet spanning multiple descriptors [ 935.236273] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet spanning multiple descriptors [ 941.527928] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down [ 944.406428] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 1033.372512] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet spanning multiple descriptors [ 1033.372568] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet spanning multiple descriptors [ 1350.205625] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down [ 1352.937982] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled ** Model information Hardware : QNAP TS-41x Revision : 0000 ** Loaded modules: nfsd auth_rpcgss nfs_acl nfs lockd dns_resolver fscache sunrpc loop hmac evdev ehci_orion sha1_generic xhci_hcd ehci_hcd orion_wdt usbcore mv_cesa usb_common gpio_keys ext4 mbcache jbd2 dm_crypt dm_mod raid456 async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq md_mod netconsole configfs cbc xts gf128mul sd_mod crc_t10dif sata_mv mv643xx_eth inet_lro libphy libata scsi_mod ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address 10.3.2.21 netmask 255.0.0.0 gateway 10.0.0.0 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 172.16.0.1 dns-search siccegge.de iface eth0 inet6 static address 2001:4dd0:ff00:8384::2 gateway 2001:4dd0:ff00:8384::1 netmask 64 ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/ether 00:08:9b:d1:4b:10 brd ff:ff:ff:ff:ff:ff inet 10.3.2.21/8 brd 10.255.255.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::208:9bff:fed1:4b10/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 00:08:9b:d1:4b:11 brd ff:ff:ff:ff:ff:ff *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 260 4 0 0 0 0 0 0 260 4 0 0 0 0 0 0 eth1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eth0: 127488042 133737 17071 17080 0 0 0 0 88917294 125020 0 0 0 0 0 0 *** Protocol statistics: Ip: 106682 total packets received 0 forwarded 0 incoming packets discarded 106445 incoming packets delivered 78355 requests sent out Icmp: 38 ICMP messages received 38 input ICMP message failed. ICMP input histogram: destination unreachable: 38 0 ICMP messages sent 0 ICMP messages failed ICMP output histogram: IcmpMsg: InType3: 38 Tcp: 24 active connections openings 5 passive connection openings 0 failed connection attempts 1 connection resets received 3 connections established 99965 segments received 123725 segments send out 387 segments retransmited 0 bad segments received. 3 resets sent Udp: 139 packets received 0 packets to unknown port received. 0 packet receive errors 150 packets sent UdpLite: TcpExt: 533 delayed acks sent 1 delayed acks further delayed because of locked socket Quick ack mode was activated 596 times 6 packets directly queued to recvmsg prequeue. 12 bytes directly received in process context from prequeue 23728 packet headers predicted 30172 acknowledgments not containing data payload received 4483 predicted acknowledgments 7 times recovered from packet loss by selective acknowledgements 25 congestion windows recovered without slow start after partial ack 51 fast retransmits 196 retransmits in slow start 122 other TCP timeouts 617 DSACKs sent for old packets 170 DSACKs sent for out of order packets 25 DSACKs received 1 connections reset due to early user close TCPDSACKIgnoredNoUndo: 4 TCPSackShifted: 5 TCPSackMerged: 19 TCPSackShiftFallback: 56 TCPRcvCoalesce: 34705 TCPOFOQueue: 25393 TCPOFOMerge: 170 IpExt: InNoRoutes: 1 InMcastPkts: 210 InBcastPkts: 6093 InOctets: 99123066 OutOctets: 84324969 InMcastOctets: 8912 InBcastOctets: 772651 ** PCI devices: 00:00.0 Host bridge [0600]: Marvell Technology Group Ltd. Device [11ab:6282] (rev 01) Subsystem: Marvell Technology Group Ltd. Device [11ab:11ab] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 9 Region 0: Memory at <ignored> (64-bit, prefetchable) Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [60] Express (v1) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 unlimited ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- 00:01.0 SCSI storage controller [0100]: Marvell Technology Group Ltd. 88SX7042 PCI-e 4-port SATA-II [11ab:7042] (rev 02) Subsystem: Marvell Technology Group Ltd. Device [11ab:11ab] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 9 Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=1M] Region 2: I/O ports at 1000 [size=256] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 <256ns, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- Kernel driver in use: sata_mv 01:00.0 Host bridge [0600]: Marvell Technology Group Ltd. Device [11ab:6282] (rev 01) Subsystem: Marvell Technology Group Ltd. Device [11ab:11ab] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at <ignored> (64-bit, prefetchable) Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [60] Express (v1) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 unlimited ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- 01:01.0 USB controller [0c03]: Etron Technology, Inc. EJ168 USB 3.0 Host Controller [1b6f:7023] (rev 01) (prog-if 30 [XHCI]) Subsystem: Etron Technology, Inc. EJ168 USB 3.0 Host Controller [1b6f:7023] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at e8000000 (64-bit, non-prefetchable) [size=32K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] MSI: Enable- Count=1/4 Maskable+ 64bit+ Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [a0] Express (v2) Endpoint, MSI 01 DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [190 v1] Device Serial Number 01-01-01-01-01-01-01-01 Kernel driver in use: xhci_hcd ** USB devices: Bus 003 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 7.1 APT prefers stable APT policy: (990, 'stable'), (500, 'unstable'), (500, 'testing') Architecture: armel (armv5tel) Kernel: Linux 3.9-0.bpo.1-kirkwood Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.9-0.bpo.1-kirkwood depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.112~bpo70+1 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.9-0.bpo.1-kirkwood recommends: ii firmware-linux-free 3.2 ii uboot-mkimage 2012.04.01-2 Versions of packages linux-image-3.9-0.bpo.1-kirkwood suggests: pn debian-kernel-handbook <none> pn fdutils <none> pn linux-doc-3.9 <none> Versions of packages linux-image-3.9-0.bpo.1-kirkwood is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.9-0.bpo.1-kirkwood/postinst/depmod-error-initrd-3.9-0.bpo.1-kirkwood: false linux-image-3.9-0.bpo.1-kirkwood/prerm/removing-running-kernel-3.9-0.bpo.1-kirkwood: true linux-image-3.9-0.bpo.1-kirkwood/postinst/ignoring-ramdisk: linux-image-3.9-0.bpo.1-kirkwood/postinst/missing-firmware-3.9-0.bpo.1-kirkwood:
--- End Message ---
--- Begin Message ---
- To: 718196-done@bugs.debian.org
- Subject: Re: Bug#718196: linux-image-3.9-0.bpo.1-kirkwood: mv_cesa broken
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Tue, 24 Apr 2018 15:37:59 +0100
- Message-id: <bc618c010f2541b9151ff8f3b3672f54bdaaea80.camel@decadent.org.uk>
- In-reply-to: <20180304184434.3oumxnfa73lnvscn@jirafa.cyrius.com>
- References: <20130728155524.3144.58460.reportbug@backup.siccegge.de> <87siyyk6ve.fsf@anonymous.siccegge.de> <1375043519.2546.20.camel@deadeye.wl.decadent.org.uk> <20180304184434.3oumxnfa73lnvscn@jirafa.cyrius.com>
Version: 3.10~rc7-1~exp1 On Sun, 4 Mar 2018 19:44:34 +0100 Martin Michlmayr <tbm@cyrius.com> wrote: > * Ben Hutchings <ben@decadent.org.uk> [2013-07-28 21:31]: > > > FWIW: > > > http://lists.infradead.org/pipermail/linux-arm-kernel/2012-September/122873.html > > > > Those fixes were applied in 3.10 and then backported in 3.9.9 and > > 3.2.48. > > Sounds like this bug can be closed? Yes, indeed. Ben. -- Ben Hutchings Teamwork is essential - it allows you to blame someone else.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---