Bug#886554: linux-image-4.9.0-5-amd64: OOcannot connect into a wifi network
Package: src:linux
Version: 4.9.65-3+deb9u2
Severity: important
Dear Maintainer,
After the latest upgrade i cannot connect to a wifi network.
The dmesg output is:
[ 19.462420] wlo1: authenticate with d4:21:22:4a:61:09
[ 19.486653] wlo1: send auth to d4:21:22:4a:61:09 (try 1/3)
[ 19.588170] wlo1: send auth to d4:21:22:4a:61:09 (try 2/3)
[ 19.692181] wlo1: send auth to d4:21:22:4a:61:09 (try 3/3)
[ 19.796340] wlo1: authentication with d4:21:22:4a:61:09 timed out
[ 20.866533] wlo1: authenticate with d4:21:22:4a:61:09
[ 20.889199] wlo1: send auth to d4:21:22:4a:61:09 (try 1/3)
[ 20.992429] wlo1: send auth to d4:21:22:4a:61:09 (try 2/3)
[ 21.096455] wlo1: send auth to d4:21:22:4a:61:09 (try 3/3)
[ 21.200468] wlo1: authentication with d4:21:22:4a:61:09 timed out
[ 22.683283] wlo1: authenticate with d4:21:22:4a:61:09
[ 22.705897] wlo1: send auth to d4:21:22:4a:61:09 (try 1/3)
[ 22.808396] wlo1: send auth to d4:21:22:4a:61:09 (try 2/3)
[ 22.912444] wlo1: send auth to d4:21:22:4a:61:09 (try 3/3)
[ 23.016377] wlo1: authentication with d4:21:22:4a:61:09 timed out
[ 24.998679] wlo1: authenticate with d4:21:22:4a:61:09
[ 25.024741] wlo1: send auth to d4:21:22:4a:61:09 (try 1/3)
[ 25.128382] wlo1: send auth to d4:21:22:4a:61:09 (try 2/3)
[ 25.232383] wlo1: send auth to d4:21:22:4a:61:09 (try 3/3)
[ 25.336423] wlo1: authentication with d4:21:22:4a:61:09 timed out
My wifi network card driver is rtl8723be.
Kind regards,
Diamantis
-- Package-specific info:
** Version:
Linux version 4.9.0-5-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.65-3+deb9u2 (2018-01-04)
** Command line:
BOOT_IMAGE=/vmlinuz-4.9.0-5-amd64 root=/dev/mapper/diamvw--vg-root ro quiet
** Not tainted
** Kernel log:
[ 2.536826] input: HP TrueVision HD as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input9
[ 2.536884] usbcore: registered new interface driver uvcvideo
[ 2.536885] USB Video Class driver (1.1.1)
[ 2.537204] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.538471] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 2.538785] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 2.540200] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 2.541481] fbcon: inteldrmfb (fb0) is primary device
[ 2.567388] pstore: Registered efi as persistent store backend
[ 2.569055] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 2.569613] rtlwifi: rtlwifi: wireless switch is on
[ 2.592365] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 2.592367] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.592368] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 2.592368] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 2.592369] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 2.592370] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 2.592370] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 2.610727] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 2.611657] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 2.611958] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 2.612024] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 2.612078] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 2.612129] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 2.613083] Adding 4104188k swap on /dev/mapper/diamvw--vg-swap_1. Priority:-1 extents:1 across:4104188k SSFS
[ 2.673701] rtl8723be 0000:02:00.0 wlo1: renamed from wlan0
[ 2.718430] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[ 2.740019] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[ 2.756256] clocksource: Switched to clocksource tsc
[ 2.772648] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.878123] random: crng init done
[ 3.166872] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.166873] Bluetooth: BNEP filters: protocol multicast
[ 3.166877] Bluetooth: BNEP socket layer initialized
[ 3.310227] input: HP WMI hotkeys as /devices/virtual/input/input11
[ 3.684999] Console: switching to colour frame buffer device 170x48
[ 3.708030] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.812569] [drm] RC6 on
[ 3.883529] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 3.884837] r8169 0000:01:00.0: firmware: direct-loading firmware rtl_nic/rtl8106e-1.fw
[ 4.069348] r8169 0000:01:00.0 enp1s0: link down
[ 4.069436] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 4.078917] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 4.931254] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 5.652873] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 5.725958] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 18.433009] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 19.462420] wlo1: authenticate with d4:21:22:4a:61:09
[ 19.486653] wlo1: send auth to d4:21:22:4a:61:09 (try 1/3)
[ 19.588170] wlo1: send auth to d4:21:22:4a:61:09 (try 2/3)
[ 19.692181] wlo1: send auth to d4:21:22:4a:61:09 (try 3/3)
[ 19.796340] wlo1: authentication with d4:21:22:4a:61:09 timed out
[ 20.866533] wlo1: authenticate with d4:21:22:4a:61:09
[ 20.889199] wlo1: send auth to d4:21:22:4a:61:09 (try 1/3)
[ 20.992429] wlo1: send auth to d4:21:22:4a:61:09 (try 2/3)
[ 21.096455] wlo1: send auth to d4:21:22:4a:61:09 (try 3/3)
[ 21.200468] wlo1: authentication with d4:21:22:4a:61:09 timed out
[ 22.683283] wlo1: authenticate with d4:21:22:4a:61:09
[ 22.705897] wlo1: send auth to d4:21:22:4a:61:09 (try 1/3)
[ 22.808396] wlo1: send auth to d4:21:22:4a:61:09 (try 2/3)
[ 22.912444] wlo1: send auth to d4:21:22:4a:61:09 (try 3/3)
[ 23.016377] wlo1: authentication with d4:21:22:4a:61:09 timed out
[ 24.998679] wlo1: authenticate with d4:21:22:4a:61:09
[ 25.024741] wlo1: send auth to d4:21:22:4a:61:09 (try 1/3)
[ 25.128382] wlo1: send auth to d4:21:22:4a:61:09 (try 2/3)
[ 25.232383] wlo1: send auth to d4:21:22:4a:61:09 (try 3/3)
[ 25.336423] wlo1: authentication with d4:21:22:4a:61:09 timed out
[ 34.519547] r8169 0000:01:00.0 enp1s0: link up
[ 34.519568] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[ 37.274673] wlo1: authenticate with d4:21:22:4a:61:09
[ 37.296126] wlo1: send auth to d4:21:22:4a:61:09 (try 1/3)
[ 37.400216] wlo1: send auth to d4:21:22:4a:61:09 (try 2/3)
[ 37.504256] wlo1: send auth to d4:21:22:4a:61:09 (try 3/3)
[ 37.608428] wlo1: authentication with d4:21:22:4a:61:09 timed out
[ 44.021215] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 44.665201] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 308.509551] usb 1-2: new high-speed USB device number 5 using xhci_hcd
[ 308.669471] usb 1-2: New USB device found, idVendor=03f0, idProduct=3e17
[ 308.669478] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 308.669483] usb 1-2: Product: HP LaserJet P1006
[ 308.669487] usb 1-2: Manufacturer: Hewlett-Packard
[ 308.669490] usb 1-2: SerialNumber: AC1F5FD
[ 312.160697] usblp 1-2:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3E17
[ 312.160719] usbcore: registered new interface driver usblp
[ 317.242902] usblp1: removed
[ 317.259278] usblp 1-2:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3E17
[ 318.042098] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=2a02:0587:4842:2200:65c5:c308:e7c3:7fb7 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=650944 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 318.042111] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=2a02:0587:4842:2200:65c5:c308:e7c3:7fb7 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=418317 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 318.042119] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=2a02:0587:4842:2200:32e1:71ff:fe93:e481 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=117094 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 318.042126] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=2a02:0587:4842:2200:32e1:71ff:fe93:e481 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=571276 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 318.042133] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:32e1:71ff:fe93:e481 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=37334 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 318.042139] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:32e1:71ff:fe93:e481 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=274105 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 318.052288] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=2a02:0587:4842:2200:65c5:c308:e7c3:7fb7 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=650944 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 318.052296] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=2a02:0587:4842:2200:65c5:c308:e7c3:7fb7 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=418317 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 318.052303] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=2a02:0587:4842:2200:32e1:71ff:fe93:e481 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=117094 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 318.052309] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=2a02:0587:4842:2200:32e1:71ff:fe93:e481 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=571276 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 341.990089] usblp1: removed
[ 367.844017] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=2a02:0587:4842:2200:65c5:c308:e7c3:7fb7 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=650944 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 367.844027] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=2a02:0587:4842:2200:65c5:c308:e7c3:7fb7 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=418317 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 387.288239] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
** Model information
sys_vendor: HP
product_name: HP Notebook
product_version: Type1ProductConfigId
chassis_vendor: HP
chassis_version: Chassis Version
bios_vendor: Insyde
bios_version: F.21
board_vendor: HP
board_name: 81ED
board_version: 62.36
** Loaded modules:
usblp
cmac
bnep
nls_ascii
nls_cp437
vfat
fat
snd_hda_codec_hdmi
snd_soc_skl
snd_soc_skl_ipc
snd_hda_codec_realtek
snd_soc_sst_ipc
snd_hda_codec_generic
snd_soc_sst_dsp
snd_hda_ext_core
snd_soc_sst_match
snd_soc_core
hp_wmi
snd_compress
arc4
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
efi_pstore
videobuf2_core
rtl8723be
videodev
intel_rapl
btcoexist
media
x86_pkg_temp_thermal
rtl8723_common
intel_powerclamp
coretemp
rtl_pci
rtlwifi
kvm_intel
snd_hda_intel
mac80211
kvm
snd_hda_codec
snd_hda_core
irqbypass
crct10dif_pclmul
i915
snd_hwdep
snd_pcm
crc32_pclmul
cfg80211
snd_timer
snd
joydev
soundcore
ghash_clmulni_intel
btusb
btrtl
evdev
drm_kms_helper
efivars
serio_raw
pcspkr
drm
iTCO_wdt
iTCO_vendor_support
i2c_algo_bit
sg
mei_me
processor_thermal_device
mei
shpchp
intel_soc_dts_iosf
intel_pch_thermal
ucsi
wmi
hci_uart
btbcm
btqca
btintel
bluetooth
intel_vbtn
ip6t_REJECT
kxcjk_1013
intel_hid
nf_reject_ipv6
intel_lpss_acpi
industrialio_triggered_buffer
soc_button_array
kfifo_buf
int3403_thermal
sparse_keymap
intel_lpss
rfkill
battery
int340x_thermal_zone
nf_log_ipv6
industrialio
dptf_power
mfd_core
ac
int3406_thermal
tpm_crb
video
int3400_thermal
hp_wireless
acpi_thermal_rel
acpi_pad
button
xt_hl
ip6t_rt
nf_conntrack_ipv6
nf_defrag_ipv6
ipt_REJECT
nf_reject_ipv4
nf_log_ipv4
nf_log_common
xt_LOG
xt_limit
xt_tcpudp
xt_addrtype
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
ip6table_filter
ip6_tables
nf_conntrack_netbios_ns
nf_conntrack_broadcast
nf_nat_ftp
nf_nat
nf_conntrack_ftp
nf_conntrack
iptable_filter
parport_pc
ppdev
lp
parport
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
jbd2
crc32c_generic
fscrypto
ecb
mbcache
hid_generic
usbhid
dm_mod
sr_mod
sd_mod
cdrom
crc32c_intel
aesni_intel
aes_x86_64
glue_helper
lrw
gf128mul
ablk_helper
cryptd
psmouse
ahci
libahci
i2c_i801
xhci_pci
i2c_smbus
libata
xhci_hcd
r8169
mii
scsi_mod
usbcore
usb_common
thermal
fan
i2c_hid
hid
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Device [8086:5904] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:81ed]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:5916] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:81ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 126
Region 0: Memory at b0000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at a0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 5000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:04.0 Signal processing controller [1180]: Intel Corporation Skylake Processor Thermal Subsystem [8086:1903] (rev 02)
Subsystem: Hewlett-Packard Company Skylake Processor Thermal Subsystem [103c:81ed]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at b1320000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: proc_thermal
Kernel modules: processor_thermal_device
00:08.0 System peripheral [0880]: Intel Corporation Skylake Gaussian Mixture Model [8086:1911]
Subsystem: Hewlett-Packard Company Skylake Gaussian Mixture Model [103c:81ed]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 255
Region 0: Memory at b1332000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller [8086:9d2f] (rev 21) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company Sunrise Point-LP USB 3.0 xHCI Controller [103c:81ed]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 123
Region 0: Memory at b1300000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Thermal subsystem [8086:9d31] (rev 21)
Subsystem: Hewlett-Packard Company Sunrise Point-LP Thermal subsystem [103c:81ed]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at b1333000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI #1 [8086:9d3a] (rev 21)
Subsystem: Hewlett-Packard Company Sunrise Point-LP CSME HECI [103c:81ed]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 125
Region 0: Memory at b1334000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] [8086:9d03] (rev 21) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Sunrise Point-LP SATA Controller [AHCI mode] [103c:81ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 124
Region 0: Memory at b1330000 (32-bit, non-prefetchable) [size=8K]
Region 1: Memory at b1337000 (32-bit, non-prefetchable) [size=256]
Region 2: I/O ports at 5080 [size=8]
Region 3: I/O ports at 5088 [size=4]
Region 4: I/O ports at 5060 [size=32]
Region 5: Memory at b1335000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 [8086:9d14] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: b1200000-b12fffff
Prefetchable memory behind bridge: 00000000b1000000-00000000b10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.5 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 [8086:9d15] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: b1100000-b11fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:9d58] (rev 21)
Subsystem: Hewlett-Packard Company Device [103c:81ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC [8086:9d21] (rev 21)
Subsystem: Hewlett-Packard Company Sunrise Point-LP PMC [103c:81ed]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at b132c000 (32-bit, non-prefetchable) [size=16K]
00:1f.3 Audio device [0403]: Intel Corporation Device [8086:9d71] (rev 21) (prog-if 80)
Subsystem: Hewlett-Packard Company Device [103c:81ed]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 127
Region 0: Memory at b1328000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at b1310000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_soc_skl
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus [8086:9d23] (rev 21)
Subsystem: Hewlett-Packard Company Sunrise Point-LP SMBus [103c:81ed]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at b1336000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 5040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136] (rev 07)
Subsystem: Hewlett-Packard Company RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [103c:81ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 122
Region 0: I/O ports at 4000 [size=256]
Region 2: Memory at b1200000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at b1000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter [10ec:b723]
Subsystem: Hewlett-Packard Company RTL8723BE PCIe Wireless Network Adapter [103c:81c1]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 3000 [size=256]
Region 2: Memory at b1100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: rtl8723be
Kernel modules: rtl8723be
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 05c8:038f Cheng Uei Precision Industry Co., Ltd (Foxlink)
Bus 001 Device 003: ID 0bda:b008 Realtek Semiconductor Corp.
Bus 001 Device 005: ID 03f0:3e17 Hewlett-Packard LaserJet P1006
Bus 001 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 9.3
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.9.0-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.9.0-5-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.130
ii kmod 23-2
ii linux-base 4.5
Versions of packages linux-image-4.9.0-5-amd64 recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2.3
Versions of packages linux-image-4.9.0-5-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.02~beta3-5
pn linux-doc-4.9 <none>
Versions of packages linux-image-4.9.0-5-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20161130-3
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: