Bug#915862: linux-image-4.18.0-3-686-pae: Doesn't boot/printk on Geode LX
This kernel, from the installer, does boot:
http://ftp.de.debian.org/debian/dists/testing/main/installer-i386/20181206/images/hd-media/
It has the same version numbers as the "normal" deb that doesn't boot
(on which I reported).
See attachment for dmesg.
[ 0.000000] Linux version 4.18.0-3-686 (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-30)) #1 SMP Debian 4.18.20-2 (2018-11-23)
[ 0.000000] x86/fpu: x87 FPU will use FSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI not present or invalid.
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x10000 max_arch_pfn = 0x100000
[ 0.000000] Disabled
[ 0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] initial memory mapped: [mem 0x00000000-0x0cffffff]
[ 0.000000] Base memory trampoline at [(ptrval)] 9b000 size 16384
[ 0.000000] RAMDISK: [mem 0x0e901000-0x0f9eafff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI BIOS Error (bug): A valid RSDP was not found (20180531/tbxfroot-210)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 256MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 10000000
[ 0.000000] low ram: 0 - 10000000
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] BRK [0x0ca69000, 0x0ca69fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000000fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000000fffffff]
[ 0.000000] On node 0 totalpages: 65439
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] Normal zone: 600 pages used for memmap
[ 0.000000] Normal zone: 61440 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] [mem 0x10000000-0xffefffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x81/0x46f with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] percpu: Embedded 29 pages/cpu @(ptrval) s86924 r0 d31860 u118784
[ 0.000000] pcpu-alloc: s86924 r0 d31860 u118784 alloc=29*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64799
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-installer root=UUIge_poison=1 slab_nomerge pti=on nomfgptr ipv6.disable=1 noisapnp slub_debug=P pag
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] BRK [0x0ca6a000, 0x0ca6afff] PGTABLE
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 230796K/261756K available (6442K kernel code, 634K rwdatem)2036K rodata, 828K init, 424K bss, 30960K reserved, 0K cma-reserved, 0K highme
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd35000 - 0xfffff000 (2856 kB)
[ 0.000000] cpu_entry : 0xff400000 - 0xff8e1000 (4996 kB)
[ 0.000000] pkmap : 0xff000000 - 0xff400000 (4096 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xfeffe000 ( 743 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] .init : 0xcc8f7000 - 0xcc9c6000 ( 828 kB)
[ 0.000000] .data : 0xcc64ab10 - 0xcc8e7ac0 (2675 kB)
[ 0.000000] .text : 0xcc000000 - 0xcc64ab10 (6442 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] ftrace: allocating 28733 entries in 57 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 2304, nr_irqs: 32, preallocated irqs: 16
[ 0.000000] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] bootconsole [earlyser0] disabled
[ 0.004000] APIC: Keep in PIC mode(8259)
[ 0.008000] tsc: Fast TSC calibration using PIT
[ 0.012000] tsc: Detected 498.075 MHz processor
[ 0.016000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0xe5be220064, max_idle_ns: 881590444521 ns
[ 0.020022] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.15 BogoMIPS (lpj=1992300)
[ 0.024016] pid_max: default: 32768 minimum: 301
[ 0.028682] Security Framework initialized
[ 0.032039] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.036632] AppArmor: AppArmor initialized
[ 0.040222] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.044024] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.054306] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.056023] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.060031] Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline
[ 0.064015] Spectre V2 : Mitigation: Full generic retpoline
[ 0.068014] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.072015] Speculative Store Bypass: Vulnerable
[ 0.100329] Freeing SMP alternatives memory: 20K
[ 0.111623] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.112021] smpboot: SMP disabled
[ 0.117252] Performance Events: no PMU driver, software events only.
[ 0.120526] Hierarchical SRCU implementation.
[ 0.130139] NMI watchdog: Perf event create on CPU 0 failed with -2
[ 0.132018] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.136616] smp: Bringing up secondary CPUs ...
[ 0.140026] smp: Brought up 1 node, 1 CPU
[ 0.144019] smpboot: Max logical packages: 1
[ 0.148021] smpboot: Total of 1 processors activated (996.15 BogoMIPS)
[ 0.156531] devtmpfs: initialized
[ 0.164370] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.168071] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.172572] pinctrl core: initialized pinctrl subsystem
[ 0.181264] NET: Registered protocol family 16
[ 0.188648] audit: initializing netlink subsys (disabled)
[ 0.196051] audit: type=2000 audit(1544185141.192:1): state=initialized audit_enabled=0 res=1
[ 0.200963] cpuidle: using governor ladder
[ 0.204041] cpuidle: using governor menu
[ 0.208704] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
[ 0.220656] PCI: PCI BIOS revision 2.10 entry at 0xfcf35, last bus=0
[ 0.224020] PCI: Using configuration type 1 for base access
[ 0.251342] HugeTLB registered 4.00 MiB page size, pre-allocated 0 pages
[ 0.257643] ACPI: Interpreter disabled.
[ 0.260766] vgaarb: loaded
[ 0.264875] EDAC MC: Ver: 3.0.0
[ 0.269416] PCI: Probing PCI hardware
[ 0.272051] PCI: root bus 00: using default resources
[ 0.272071] PCI: Probing PCI hardware (bus 00)
[ 0.272548] PCI host bridge to bus 0000:00
[ 0.276073] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.280038] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.284028] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.292090] pci 0000:00:01.0: [1022:2080] type 00 class 0x060000
[ 0.292151] pci 0000:00:01.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
[ 0.300280] pci 0000:00:01.2: [1022:2082] type 00 class 0x101000
[ 0.300356] pci 0000:00:01.2: reg 0x10: [mem 0xefff4000-0xefff7fff]
[ 0.301099] pci 0000:00:09.0: [1106:3053] type 00 class 0x020000
[ 0.301145] pci 0000:00:09.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.301172] pci 0000:00:09.0: reg 0x14: [mem 0xe0000000-0xe00000ff]
[ 0.301278] pci 0000:00:09.0: supports D1 D2
[ 0.301294] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.301925] pci 0000:00:0b.0: [1106:3053] type 00 class 0x020000
[ 0.301969] pci 0000:00:0b.0: reg 0x10: [io 0x1400-0x14ff]
[ 0.301996] pci 0000:00:0b.0: reg 0x14: [mem 0xe0040000-0xe00400ff]
[ 0.302099] pci 0000:00:0b.0: supports D1 D2
[ 0.302115] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.302736] pci 0000:00:0f.0: [1022:2090] type 00 class 0x060100
[ 0.302896] pci 0000:00:0f.0: reg 0x10: [io 0x6000-0x6007]
[ 0.302997] pci 0000:00:0f.0: reg 0x14: [io 0x6100-0x61ff]
[ 0.303098] pci 0000:00:0f.0: reg 0x18: [io 0x6200-0x623f]
[ 0.303252] pci 0000:00:0f.0: reg 0x20: [io 0x9d00-0x9d7f]
[ 0.303353] pci 0000:00:0f.0: reg 0x24: [io 0x9c00-0x9c3f]
[ 0.303937] pci 0000:00:0f.2: [1022:209a] type 00 class 0x010180
[ 0.304226] pci 0000:00:0f.2: reg 0x20: [io 0xff00-0xff0f]
[ 0.304332] pci 0000:00:0f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.308026] pci 0000:00:0f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.312027] pci 0000:00:0f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.316026] pci 0000:00:0f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.324450] pci 0000:00:0f.4: [1022:2094] type 00 class 0x0c0310
[ 0.324558] pci 0000:00:0f.4: reg 0x10: [mem 0xefffe000-0xefffefff]
[ 0.324865] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
[ 0.325522] pci 0000:00:0f.5: [1022:2095] type 00 class 0x0c0320
[ 0.325631] pci 0000:00:0f.5: reg 0x10: [mem 0xefffd000-0xefffdfff]
[ 0.325946] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
[ 0.326587] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.326967] PCI: pci_cache_line_size set to 32 bytes
[ 0.330016] clocksource: Switched to clocksource tsc-early
[ 0.543939] VFS: Disk quotas dquot_6.6.0
[ 0.548087] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.556947] AppArmor: AppArmor Filesystem Enabled
[ 0.561853] pnp: PnP ACPI: disabled
[ 0.565379] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.571282] PnPBIOS: PnP BIOS support was not detected.
[ 0.608600] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.608621] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.609108] NET: Registered protocol family 2
[ 0.616058] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.623982] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.631067] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.637616] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.644239] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.650151] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.657076] NET: Registered protocol family 1
[ 0.661837] PCI: CLS 32 bytes, default 32
[ 0.662704] Unpacking initramfs...
[ 1.046034] random: fast init done
[ 4.599629] Freeing initrd memory: 17320K
[ 4.604680] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 4.615363] alix: system is recognized as "PC Engines ALIX.2 v0.99m"
[ 4.629861] Initialise system trusted keyrings
[ 4.634744] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[ 4.682535] zbud: loaded
[ 4.689955] pstore: using deflate compression
[ 5.634336] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xe5be220064, max_idle_ns: 881590444521 ns
[ 5.654366] clocksource: Switched to clocksource tsc
[ 26.158028] Key type asymmetric registered
[ 26.162326] Asymmetric key parser 'x509' registered
[ 26.167936] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 26.175723] io scheduler noop registered
[ 26.179741] io scheduler deadline registered
[ 26.184961] io scheduler cfq registered (default)
[ 26.189746] io scheduler mq-deadline registered
[ 26.198403] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 26.205416] unchecked MSR access error: RDMSR from 0x179 at rIP: 0xcc045607 (native_read_msr+0x7/0x40)
[ 26.214766] Call Trace:
[ 26.217279] ? ghes_init+0x12f/0x12f
[ 26.220919] extlog_init+0x21/0x326
[ 26.224473] ? driver_register+0x83/0xf0
[ 26.228452] ? vesafb_driver_init+0x16/0x16
[ 26.232692] do_one_initcall+0x42/0x1a9
[ 26.236589] ? set_debug_rodata+0x14/0x14
[ 26.240659] kernel_init_freeable+0x15f/0x1e2
[ 26.245075] ? rest_init+0xa0/0xa0
[ 26.248535] kernel_init+0xd/0x100
[ 26.251958] ret_from_fork+0x2e/0x38
[ 26.255812] isapnp: ISA Plug & Play support disabled
[ 26.261882] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 26.268858] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 921600) is a NS16550A
[ 26.278082] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 921600) is a NS16550A
[ 26.291077] Linux agpgart interface v0.103
[ 26.298697] i8042: PNP: No PS/2 controller found.
[ 26.303485] i8042: Probing ports directly.
[ 27.339798] i8042: No controller found
[ 27.344610] mousedev: PS/2 mouse device common for all mice
[ 27.351410] rtc_cmos rtc_cmos: registered as rtc0
[ 27.356589] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 27.363361] ledtrig-cpu: registered to indicate activity on CPUs
[ 27.371048] IPv6: Loaded, but administratively disabled, reboot required to enable
[ 27.378664] mip6: Mobile IPv6
[ 27.381676] mip6: mip6_init: can't add xfrm type(destopt)
[ 27.387120] NET: Registered protocol family 17
[ 27.391684] mpls_gso: MPLS GSO support
[ 27.395483] mce: Unable to init MCE device (rc: -5)
[ 27.401000] Using IPI No-Shortcut mode
[ 27.404837] sched_clock: Marking stable (27404770150, 0)->(27483155732, -78385582)
[ 27.414229] registered taskstats version 1
[ 27.418386] Loading compiled-in X.509 certificates
[ 29.965011] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff'
[ 29.975147] zswap: loaded using pool lzo/zbud
[ 29.980141] AppArmor: AppArmor sha1 policy hashing enabled
[ 29.990436] rtc_cmos rtc_cmos: setting system clock to 2018-12-07 12:19:31 UTC (1544185171)
[ 30.039517] Freeing unused kernel image memory: 828K
[ 30.052616] Write protecting the kernel text: 6444k
[ 30.057993] Write protecting the kernel read-only data: 2040k
[ 30.550504] gpio-keys-polled gpio-keys-polled.1: unable to claim gpio 24, err=-517
[ 30.579634] SCSI subsystem initialized
[ 30.608954] usbcore: registered new interface driver usbfs
[ 30.652587] usbcore: registered new interface driver hub
[ 30.696688] usbcore: registered new device driver usb
[ 30.752537] libata version 3.00 loaded.
[ 30.757416] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 30.803106] ehci-pci: EHCI PCI platform driver
[ 30.836565] ehci-pci 0000:00:0f.5: EHCI Host Controller
[ 30.844752] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 30.876268] ehci-pci 0000:00:0f.5: new USB bus registered, assigned bus number 1
[ 30.925446] ehci-pci 0000:00:0f.5: irq 12, io mem 0xefffd000
[ 30.976180] ehci-pci 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[ 31.000648] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 31.009013] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 31.016289] usb usb1: Product: EHCI Host Controller
[ 31.021215] usb usb1: Manufacturer: Linux 4.18.0-3-686 ehci_hcd
[ 31.027184] usb usb1: SerialNumber: 0000:00:0f.5
[ 31.151567] hub 1-0:1.0: USB hub found
[ 31.170587] hub 1-0:1.0: 4 ports detected
[ 31.177107] gpio-keys-polled gpio-keys-polled.1: unable to claim gpio 24, err=-517
[ 31.193617] ohci-pci: OHCI PCI platform driver
[ 31.208561] gpio-keys-polled gpio-keys-polled.1: unable to claim gpio 24, err=-517
[ 31.016289] usb usb1: Product: EHCI Host Controller
[ 31.021215] usb usb1: Manufacturer: Linux 4.18.0-3-686 ehci_hcd
[ 31.027184] usb usb1: SerialNumber: 0000:00:0f.5
[ 31.151567] hub 1-0:1.0: USB hub found
[ 31.170587] hub 1-0:1.0: 4 ports detected
[ 31.177107] gpio-keys-polled gpio-keys-polled.1: unable to claim gpio 24, err=-517
[ 31.193617] ohci-pci: OHCI PCI platform driver
[ 31.208561] gpio-keys-polled gpio-keys-polled.1: unable to claim gpio 24, err=-517
[ 31.216616] ohci-pci 0000:00:0f.4: OHCI PCI host controller
[ 31.227957] ohci-pci 0000:00:0f.4: new USB bus registered, assigned bus number 2
[ 31.243235] ohci-pci 0000:00:0f.4: irq 12, io mem 0xefffe000
[ 31.340573] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[ 31.348891] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 31.356161] usb usb2: Product: OHCI PCI host controller
[ 31.361434] usb usb2: Manufacturer: Linux 4.18.0-3-686 ohci_hcd
[ 31.367402] usb usb2: SerialNumber: 0000:00:0f.4
[ 31.375949] hub 2-0:1.0: USB hub found
[ 31.379932] hub 2-0:1.0: 4 ports detected
[ 31.385659] gpio-keys-polled gpio-keys-polled.1: unable to claim gpio 24, err=-517
[ 31.408310] gpio-keys-polled gpio-keys-polled.1: unable to claim gpio 24, err=-517
[ 75.914306] random: crng init done
Reply to: