[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#909852: linux-image-4.18-0-0.bpo.1-amd64: backtrace in dmesg after suspend



Package: src:linux
Version: 4.18.6-1~bpo9+1
Followup-For: Bug #909852

Dear Maintainer,

I tried to suspend the system today and it resulted with a backtrace
after waking the system. The dmesg shows that amdgpu is involved with
this backtrace. It looks to me it has trouble to resume. Interesting
thing is that if i suspend/resume the first time after boot, the backtrace
appears. This first attempt was aproximatly two hours after system boot.
But if i do it again then the suspend/resume performs correctly.
This event doesn not affect the system as whole, only this message in dmesg.

Thank you for your time and i hope this helps debian to better stability.


-- Package-specific info:
** Version:
Linux version 4.18.0-0.bpo.1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP Debian 4.18.6-1~bpo9+1 (2018-09-13)

** Command line:
BOOT_IMAGE=/vmlinuz-4.18.0-0.bpo.1-amd64 root=/dev/mapper/debian--stretch-root ro quiet

** Tainted: WO (4608)
 * Taint on warning.
 * Out-of-tree module has been loaded.

** Kernel log:
Unable to read kernel log; any relevant messages should be attached

** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Default string
chassis_version: Default string
bios_vendor: American Megatrends Inc.
bios_version: 3401
board_vendor: ASUSTeK COMPUTER INC.
board_name: PRIME A320M-K
board_version: Rev X.0x

** Loaded modules:
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
xt_tcpudp
xt_conntrack
iptable_nat
nf_conntrack_ipv4
nf_defrag_ipv4
nf_nat_ipv4
nf_nat
nf_conntrack
iptable_filter
binfmt_misc
dm_thin_pool
dm_persistent_data
amdkfd
dm_bio_prison
dm_bufio
libcrc32c
eeepc_wmi
asus_wmi
sparse_keymap
rfkill
wmi_bmof
amdgpu
edac_mce_amd
kvm_amd
snd_hda_codec_realtek
ccp
snd_hda_codec_generic
chash
gpu_sched
snd_hda_codec_hdmi
rng_core
snd_hda_intel
ttm
kvm
snd_hda_codec
drm_kms_helper
snd_hda_core
irqbypass
drm
snd_hwdep
snd_pcm
evdev
pcspkr
sg
serio_raw
crct10dif_pclmul
crc32_pclmul
snd_timer
ghash_clmulni_intel
snd
i2c_algo_bit
soundcore
fam15h_power
k10temp
sp5100_tco
video
wmi
button
pcc_cpufreq
acpi_cpufreq
parport_pc
ppdev
lp
parport
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
sr_mod
cdrom
dm_mod
hid_generic
uas
usbhid
usb_storage
hid
sd_mod
crc32c_intel
aesni_intel
aes_x86_64
crypto_simd
cryptd
glue_helper
ahci
xhci_pci
libahci
i2c_piix4
xhci_hcd
libata
r8169
scsi_mod
mii
usbcore
usb_common
gpio_amdpt
gpio_generic

** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1576]
	Subsystem: ASUSTeK Computer Inc. Device [1043:8719]
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:00.2 IOMMU [0806]: Advanced Micro Devices, Inc. [AMD] Device [1022:1577]
	Subsystem: ASUSTeK Computer Inc. Device [1043:8719]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 25
	Capabilities: <access denied>

00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Carrizo [1002:9874] (rev e2) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Carrizo [1043:8719]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 52
	Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Region 2: Memory at f0000000 (64-bit, prefetchable) [size=8M]
	Region 4: I/O ports at f000 [size=256]
	Region 5: Memory at fe900000 (32-bit, non-prefetchable) [size=256K]
	Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: amdgpu
	Kernel modules: amdgpu

00:01.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Kabini HDMI/DP Audio [1002:9840]
	Subsystem: ASUSTeK Computer Inc. Kabini HDMI/DP Audio [1043:8719]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 50
	Region 0: Memory at fe964000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:02.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:157b]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:02.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:157c] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 26
	Bus: primary=00, secondary=01, subordinate=06, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fe700000-fe8fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:03.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:157b]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:08.0 Encryption controller [1080]: Advanced Micro Devices, Inc. [AMD] Device [1022:1578]
	Subsystem: Advanced Micro Devices, Inc. [AMD] Device [1022:1578]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at f0800000 (64-bit, prefetchable) [size=128K]
	Region 2: Memory at fe600000 (32-bit, non-prefetchable) [size=1M]
	Region 3: Memory at fe96e000 (32-bit, non-prefetchable) [size=4K]
	Region 5: Memory at fe96a000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>

00:09.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:157d]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:09.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Device [1022:157a]
	Subsystem: ASUSTeK Computer Inc. Device [1043:86c7]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 49
	Region 0: Memory at fe960000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:10.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller [1022:7914] (rev 20) (prog-if 30 [XHCI])
	Subsystem: ASUSTeK Computer Inc. FCH USB XHCI Controller [1043:8719]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at fe968000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci

00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7901] (rev 49) (prog-if 01 [AHCI 1.0])
	Subsystem: ASUSTeK Computer Inc. FCH SATA Controller [AHCI mode] [1043:8719]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: I/O ports at f140 [size=8]
	Region 1: I/O ports at f130 [size=4]
	Region 2: I/O ports at f120 [size=8]
	Region 3: I/O ports at f110 [size=4]
	Region 4: I/O ports at f100 [size=16]
	Region 5: Memory at fe96c000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller [1022:790b] (rev 4a)
	Subsystem: ASUSTeK Computer Inc. FCH SMBus Controller [1043:8719]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Kernel driver in use: piix4_smbus
	Kernel modules: i2c_piix4, sp5100_tco

00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge [1022:790e] (rev 11)
	Subsystem: ASUSTeK Computer Inc. FCH LPC Bridge [1043:8719]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1570]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1571]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1572]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1573]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>
	Kernel driver in use: k10temp
	Kernel modules: k10temp

00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1574]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Kernel driver in use: fam15h_power
	Kernel modules: fam15h_power

00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1575]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

01:00.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Device [1022:43bc] (rev 02) (prog-if 30 [XHCI])
	Subsystem: ASMedia Technology Inc. Device [1b21:1142]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 29
	Region 0: Memory at fe8a0000 (64-bit, non-prefetchable) [size=32K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci

01:00.1 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] Device [1022:43b8] (rev 02) (prog-if 01 [AHCI 1.0])
	Subsystem: ASMedia Technology Inc. Device [1b21:1062]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 42
	Region 5: Memory at fe880000 (32-bit, non-prefetchable) [size=128K]
	Expansion ROM at fe800000 [disabled] [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

01:00.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:43b3] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin C routed to IRQ 28
	Bus: primary=01, secondary=02, subordinate=06, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fe700000-fe7fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

02:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:43b4] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 30
	Bus: primary=02, secondary=03, subordinate=03, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

02:05.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:43b4] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 32
	Bus: primary=02, secondary=04, subordinate=04, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

02:06.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:43b4] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 33
	Bus: primary=02, secondary=05, subordinate=05, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fe700000-fe7fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

02:07.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:43b4] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 35
	Bus: primary=02, secondary=06, subordinate=06, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
	Subsystem: ASUSTeK Computer Inc. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [1043:8677]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 27
	Region 0: I/O ports at e000 [size=256]
	Region 2: Memory at fe704000 (64-bit, non-prefetchable) [size=4K]
	Region 4: Memory at fe700000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: r8169
	Kernel modules: r8169


** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 1bcf:0005 Sunplus Innovation Technology Inc. Optical Mouse
Bus 003 Device 002: ID 058f:6364 Alcor Micro Corp. AU6477 Card Reader Controller
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 4.18.0-0.bpo.1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8), LANGUAGE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.18.0-0.bpo.1-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.130
ii  kmod                                    23-2
ii  linux-base                              4.5

Versions of packages linux-image-4.18.0-0.bpo.1-amd64 recommends:
ii  apparmor             2.11.0-3+deb9u2
ii  firmware-linux-free  3.4
ii  irqbalance           1.1.0-2.3

Versions of packages linux-image-4.18.0-0.bpo.1-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.02~beta3-5
ii  linux-doc-4.18          4.18.6-1~bpo9+1

Versions of packages linux-image-4.18.0-0.bpo.1-amd64 is related to:
ii  firmware-amd-graphics     20161130-3
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
ii  firmware-linux-nonfree    20161130-3
ii  firmware-misc-nonfree     20161130-3
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
ii  firmware-realtek          20161130-3
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information
2018-10-04T20:34:14.132632+02:00 debian kernel: [ 6297.404210] PM: suspend entry (deep)
2018-10-04T20:34:30.812354+02:00 debian kernel: [ 6297.404213] PM: Syncing filesystems ... done.
2018-10-04T20:34:30.812493+02:00 debian kernel: [ 6297.495211] Freezing user space processes ... (elapsed 0.002 seconds) done.
2018-10-04T20:34:30.812496+02:00 debian kernel: [ 6297.497790] OOM killer disabled.
2018-10-04T20:34:30.812498+02:00 debian kernel: [ 6297.497792] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
2018-10-04T20:34:30.812499+02:00 debian kernel: [ 6297.499965] Suspending console(s) (use no_console_suspend to debug)
2018-10-04T20:34:30.812500+02:00 debian kernel: [ 6297.516671] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
2018-10-04T20:34:30.812501+02:00 debian kernel: [ 6297.521429] sd 2:0:0:0: [sdb] Stopping disk
2018-10-04T20:34:30.812503+02:00 debian kernel: [ 6297.524659] sd 1:0:0:0: [sda] Synchronizing SCSI cache
2018-10-04T20:34:30.812504+02:00 debian kernel: [ 6297.561890] sd 1:0:0:0: [sda] Stopping disk
2018-10-04T20:34:30.812505+02:00 debian kernel: [ 6297.612621] amdgpu 0000:00:01.0: 000000009ebf6ca2 unpin not necessary
2018-10-04T20:34:30.812521+02:00 debian kernel: [ 6298.272750] pci_raw_set_power_state: 5 callbacks suppressed
2018-10-04T20:34:30.812523+02:00 debian kernel: [ 6298.272756] snd_hda_intel 0000:00:09.2: Refused to change power state, currently in D0
2018-10-04T20:34:30.812524+02:00 debian kernel: [ 6298.332872] ACPI: Preparing to enter system sleep state S3
2018-10-04T20:34:30.812525+02:00 debian kernel: [ 6298.660146] PM: Saving platform NVS memory
2018-10-04T20:34:30.812527+02:00 debian kernel: [ 6298.660255] Disabling non-boot CPUs ...
2018-10-04T20:34:30.812528+02:00 debian kernel: [ 6298.673315] IRQ 26: no longer affine to CPU1
2018-10-04T20:34:30.812529+02:00 debian kernel: [ 6298.673326] IRQ 37: no longer affine to CPU1
2018-10-04T20:34:30.812530+02:00 debian kernel: [ 6298.673330] IRQ 38: no longer affine to CPU1
2018-10-04T20:34:30.812531+02:00 debian kernel: [ 6298.673335] IRQ 40: no longer affine to CPU1
2018-10-04T20:34:30.812532+02:00 debian kernel: [ 6298.673340] IRQ 42: no longer affine to CPU1
2018-10-04T20:34:30.812534+02:00 debian kernel: [ 6298.673345] IRQ 43: no longer affine to CPU1
2018-10-04T20:34:30.812535+02:00 debian kernel: [ 6298.673349] IRQ 44: no longer affine to CPU1
2018-10-04T20:34:30.812536+02:00 debian kernel: [ 6298.674447] smpboot: CPU 1 is now offline
2018-10-04T20:34:30.812537+02:00 debian kernel: [ 6298.697337] IRQ 19: no longer affine to CPU2
2018-10-04T20:34:30.812538+02:00 debian kernel: [ 6298.697366] IRQ 41: no longer affine to CPU2
2018-10-04T20:34:30.812539+02:00 debian kernel: [ 6298.698484] smpboot: CPU 2 is now offline
2018-10-04T20:34:30.812540+02:00 debian kernel: [ 6298.729324] IRQ 1: no longer affine to CPU3
2018-10-04T20:34:30.812541+02:00 debian kernel: [ 6298.730419] smpboot: CPU 3 is now offline
2018-10-04T20:34:30.812543+02:00 debian kernel: [ 6298.731401] ACPI: Low-level resume complete
2018-10-04T20:34:30.812544+02:00 debian kernel: [ 6298.731436] PM: Restoring platform NVS memory
2018-10-04T20:34:30.812545+02:00 debian kernel: [ 6298.731531] LVT offset 0 assigned for vector 0x400
2018-10-04T20:34:30.812546+02:00 debian kernel: [ 6298.731747] Enabling non-boot CPUs ...
2018-10-04T20:34:30.812548+02:00 debian kernel: [ 6298.731786] x86: Booting SMP configuration:
2018-10-04T20:34:30.812549+02:00 debian kernel: [ 6298.731787] smpboot: Booting Node 0 Processor 1 APIC 0x11
2018-10-04T20:34:30.812550+02:00 debian kernel: [ 6298.734095]  cache: parent cpu1 should not be sleeping
2018-10-04T20:34:30.812551+02:00 debian kernel: [ 6298.734166] microcode: CPU1: patch_level=0x06006118
2018-10-04T20:34:30.812553+02:00 debian kernel: [ 6298.734290] CPU1 is up
2018-10-04T20:34:30.812554+02:00 debian kernel: [ 6298.734315] smpboot: Booting Node 0 Processor 2 APIC 0x12
2018-10-04T20:34:30.812555+02:00 debian kernel: [ 6298.736745]  cache: parent cpu2 should not be sleeping
2018-10-04T20:34:30.812556+02:00 debian kernel: [ 6298.736819] microcode: CPU2: patch_level=0x06006118
2018-10-04T20:34:30.812557+02:00 debian kernel: [ 6298.736976] CPU2 is up
2018-10-04T20:34:30.812558+02:00 debian kernel: [ 6298.736994] smpboot: Booting Node 0 Processor 3 APIC 0x13
2018-10-04T20:34:30.812559+02:00 debian kernel: [ 6298.739288]  cache: parent cpu3 should not be sleeping
2018-10-04T20:34:30.812560+02:00 debian kernel: [ 6298.739360] microcode: CPU3: patch_level=0x06006118
2018-10-04T20:34:30.812561+02:00 debian kernel: [ 6298.739527] CPU3 is up
2018-10-04T20:34:30.812563+02:00 debian kernel: [ 6298.740042] ACPI: Waking up from system sleep state S3
2018-10-04T20:34:30.812564+02:00 debian kernel: [ 6298.846157] usb usb3: root hub lost power or was reset
2018-10-04T20:34:30.812565+02:00 debian kernel: [ 6298.846160] usb usb4: root hub lost power or was reset
2018-10-04T20:34:30.812566+02:00 debian kernel: [ 6298.846517] [drm] PCIE GART of 1024M enabled (table at 0x000000F400000000).
2018-10-04T20:34:30.812567+02:00 debian kernel: [ 6298.853288] sd 1:0:0:0: [sda] Starting disk
2018-10-04T20:34:30.812568+02:00 debian kernel: [ 6298.853296] sd 2:0:0:0: [sdb] Starting disk
2018-10-04T20:34:30.812569+02:00 debian kernel: [ 6298.875951] [drm] SADs count is: -2, don't need to read it
2018-10-04T20:34:30.812570+02:00 debian kernel: [ 6298.876992] WARNING: CPU: 3 PID: 22040 at /build/linux-GVmoCH/linux-4.18.6/drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:710 dm_resume+0x1b7/0x230 [amdgpu]
2018-10-04T20:34:30.812573+02:00 debian kernel: [ 6298.876993] Modules linked in: pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) xt_tcpudp xt_conntrack iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_filter binfmt_misc dm_thin_pool dm_persistent_data amdkfd dm_bio_prison dm_bufio libcrc32c eeepc_wmi asus_wmi sparse_keymap rfkill wmi_bmof amdgpu edac_mce_amd kvm_amd snd_hda_codec_realtek ccp snd_hda_codec_generic chash gpu_sched snd_hda_codec_hdmi rng_core snd_hda_intel ttm kvm snd_hda_codec drm_kms_helper snd_hda_core irqbypass drm snd_hwdep snd_pcm evdev pcspkr sg serio_raw crct10dif_pclmul crc32_pclmul snd_timer ghash_clmulni_intel snd i2c_algo_bit soundcore fam15h_power k10temp sp5100_tco video wmi button pcc_cpufreq acpi_cpufreq parport_pc ppdev lp parport ip_tables x_tables autofs4 ext4 crc16
2018-10-04T20:34:30.812574+02:00 debian kernel: [ 6298.877027]  mbcache jbd2 crc32c_generic fscrypto ecb sr_mod cdrom dm_mod hid_generic uas usbhid usb_storage hid sd_mod crc32c_intel aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ahci xhci_pci libahci i2c_piix4 xhci_hcd libata r8169 scsi_mod mii usbcore usb_common gpio_amdpt gpio_generic
2018-10-04T20:34:30.812576+02:00 debian kernel: [ 6298.877047] CPU: 3 PID: 22040 Comm: kworker/u32:27 Tainted: G           O      4.18.0-0.bpo.1-amd64 #1 Debian 4.18.6-1~bpo9+1
2018-10-04T20:34:30.812577+02:00 debian kernel: [ 6298.877048] Hardware name: System manufacturer System Product Name/PRIME A320M-K, BIOS 3401 12/04/2017
2018-10-04T20:34:30.812579+02:00 debian kernel: [ 6298.877051] Workqueue: events_unbound async_run_entry_fn
2018-10-04T20:34:30.812580+02:00 debian kernel: [ 6298.877089] RIP: 0010:dm_resume+0x1b7/0x230 [amdgpu]
2018-10-04T20:34:30.812581+02:00 debian kernel: [ 6298.877089] Code: ef e8 6d f3 ac ff 48 c7 83 b0 b7 00 00 00 00 00 00 89 c5 48 89 df e8 38 1a 00 00 89 e8 5b 5d 41 5c 41 5d 41 5e c3 0f 0b eb ac <0f> 0b e9 44 ff ff ff 4d 8d b4 24 40 0d 00 00 4c 89 f7 e8 62 69 ee 
2018-10-04T20:34:30.812582+02:00 debian kernel: [ 6298.877105] RSP: 0018:ffffb1f9c30b7d40 EFLAGS: 00010202
2018-10-04T20:34:30.812583+02:00 debian kernel: [ 6298.877106] RAX: 0000000000000002 RBX: ffff99c3162e0000 RCX: 0000000000000003
2018-10-04T20:34:30.812585+02:00 debian kernel: [ 6298.877107] RDX: 0000000000000003 RSI: ffff99c2a123a000 RDI: ffff99c3152bb800
2018-10-04T20:34:30.812586+02:00 debian kernel: [ 6298.877107] RBP: ffff99c31841f800 R08: 0000000000024e60 R09: ffffffffc0e5190d
2018-10-04T20:34:30.812587+02:00 debian kernel: [ 6298.877108] R10: ffffdac342e6ddc0 R11: 0000000000000001 R12: 0000000000000000
2018-10-04T20:34:30.812588+02:00 debian kernel: [ 6298.877108] R13: ffff99c3134cc800 R14: ffff99c313005d40 R15: ffffffff934a4fff
2018-10-04T20:34:30.812589+02:00 debian kernel: [ 6298.877109] FS:  0000000000000000(0000) GS:ffff99c31aac0000(0000) knlGS:0000000000000000
2018-10-04T20:34:30.812590+02:00 debian kernel: [ 6298.877110] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
2018-10-04T20:34:30.812591+02:00 debian kernel: [ 6298.877111] CR2: 0000000000000000 CR3: 00000000bc80a000 CR4: 00000000001406e0
2018-10-04T20:34:30.812593+02:00 debian kernel: [ 6298.877112] Call Trace:
2018-10-04T20:34:30.812594+02:00 debian kernel: [ 6298.877141]  amdgpu_device_ip_resume_phase2+0x58/0xb0 [amdgpu]
2018-10-04T20:34:30.812595+02:00 debian kernel: [ 6298.877167]  amdgpu_device_resume+0xbb/0x360 [amdgpu]
2018-10-04T20:34:30.812596+02:00 debian kernel: [ 6298.877170]  ? pci_add_dynid+0x100/0x100
2018-10-04T20:34:30.812597+02:00 debian kernel: [ 6298.877172]  dpm_run_callback+0x4f/0x170
2018-10-04T20:34:30.812598+02:00 debian kernel: [ 6298.877174]  device_resume+0x93/0x180
2018-10-04T20:34:30.812599+02:00 debian kernel: [ 6298.877175]  async_resume+0x19/0x40
2018-10-04T20:34:30.812600+02:00 debian kernel: [ 6298.877177]  async_run_entry_fn+0x39/0x160
2018-10-04T20:34:30.812601+02:00 debian kernel: [ 6298.877178]  process_one_work+0x191/0x370
2018-10-04T20:34:30.812602+02:00 debian kernel: [ 6298.877180]  worker_thread+0x4f/0x3b0
2018-10-04T20:34:30.812603+02:00 debian kernel: [ 6298.877181]  kthread+0xf8/0x130
2018-10-04T20:34:30.812604+02:00 debian kernel: [ 6298.877182]  ? rescuer_thread+0x340/0x340
2018-10-04T20:34:30.812605+02:00 debian kernel: [ 6298.877183]  ? kthread_create_worker_on_cpu+0x70/0x70
2018-10-04T20:34:30.812607+02:00 debian kernel: [ 6298.877185]  ret_from_fork+0x22/0x40
2018-10-04T20:34:30.812608+02:00 debian kernel: [ 6298.877187] ---[ end trace a97bc892476294bb ]---
2018-10-04T20:34:30.812609+02:00 debian kernel: [ 6299.005183] r8169 0000:05:00.0 enp5s0: link down
2018-10-04T20:34:30.812610+02:00 debian kernel: [ 6299.049406] [drm] UVD initialized successfully.
2018-10-04T20:34:30.812611+02:00 debian kernel: [ 6299.161349] ata1: SATA link down (SStatus 0 SControl 300)
2018-10-04T20:34:30.812612+02:00 debian kernel: [ 6299.163458] ata6: SATA link down (SStatus 0 SControl 300)
2018-10-04T20:34:30.812613+02:00 debian kernel: [ 6299.248684] [drm] VCE initialized successfully.
2018-10-04T20:34:30.812614+02:00 debian kernel: [ 6299.257466] usb 3-5: reset high-speed USB device number 2 using xhci_hcd
2018-10-04T20:34:30.812615+02:00 debian kernel: [ 6299.321298] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
2018-10-04T20:34:30.812616+02:00 debian kernel: [ 6299.338346] ata7.00: configured for UDMA/100
2018-10-04T20:34:30.812618+02:00 debian kernel: [ 6299.677519] usb 3-6: reset low-speed USB device number 3 using xhci_hcd
2018-10-04T20:34:30.812618+02:00 debian kernel: [ 6300.084093] acpi LNXPOWER:07: Turning OFF
2018-10-04T20:34:30.812620+02:00 debian kernel: [ 6300.084141] OOM killer enabled.
2018-10-04T20:34:30.816549+02:00 debian kernel: [ 6300.084142] Restarting tasks ... done.
2018-10-04T20:34:30.816569+02:00 debian kernel: [ 6300.086412] PM: suspend exit
2018-10-04T20:34:32.392760+02:00 debian kernel: [ 6301.661338] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
2018-10-04T20:34:32.464637+02:00 debian kernel: [ 6301.736906] ata3.00: configured for UDMA/133
2018-10-04T20:34:32.520841+02:00 debian kernel: [ 6301.789200] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
2018-10-04T20:34:32.552710+02:00 debian kernel: [ 6301.825200] ata2.00: configured for UDMA/133
2018-10-04T20:34:32.564897+02:00 debian kernel: [ 6301.835845] r8169 0000:05:00.0 enp5s0: link up
2018-10-04T20:34:32.568496+02:00 debian kernel: [ 6301.839829] Process accounting resumed

Reply to: