Bug#910010: linux-image-4.18.0-1-amd64: The module pata_legacy.ko is missing.
On Mon, 01 Oct 2018 14:07:35 +0100
Ben Hutchings <ben@decadent.org.uk> wrote:
> We have *never* enabled this driver on amd64 because only very old
> (32- bit) PCs should require it. Did you use a custom kernel, or an
> i386 installation?
I did not use a custom kernel on this device. Installed it with an
unmodified debian installer (I think wheezy, but not for shure).
I thought it was amd64, but as you stated - the option was never
activated - it must be i386 and I switched to amd64 afterwards.
> If this system still requires the pata_legacy driver then I suppose
> we'll have to enable it for amd64.
Unfortionaly the option is required. Otherwise the DiskOnModule can not
be mounted and no Kernel update take place.
---8<---
[ 2.106308] libata version 3.00 loaded.
[ 2.107157] sata_sil24 0000:02:00.0: version 1.1
[ 2.119020] scsi host0: sata_sil24
[ 2.128114] scsi host2: sata_sil24
[ 2.128288] ata1: SATA max UDMA/100 host m128@0xff8ffc00 port
0xff8f8000 irq 18
[ 2.128293] ata2: SATA max UDMA/100 host
m128@0xff8ffc00 port 0xff8fa000 irq 18
[ 2.158917] ata3: SATA max UDMA/133 abar m1024@0xffa3fc00 port
0xffa3fd00 irq 27
[ 2.158921] ata4: SATA max UDMA/133 abar m1024@0xffa3fc00 port
0xffa3fd80 irq 27
[ 2.158924] ata5: SATA max UDMA/133 abar m1024@0xffa3fc00 port
0xffa3fe00 irq 27
[ 2.158926] ata6: SATA max UDMA/133 abar m1024@0xffa3fc00 port
0xffa3fe80 irq 27
[ 2.474367] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.474859] ata3.00: ATA-8: WDC WD10EZRX-22L4HB0, 01.01A01, max
UDMA/133
[ 2.474862] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth
32), AA
[ 2.475359] ata3.00: configured for UDMA/133
[ 2.482616] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.483173] ata4.00: ATA-10: WDC WD10EZEX-00WN4A0, 01.01A01, max
UDMA/133
[ 2.483177] ata4.00: 1953525168 sectors, multi 16: LBA48
NCQ (depth 32), AA
[ 2.483766] ata4.00: configured for UDMA/133
[ 2.486634] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.487476] ata5.00: ATA-8: WDC WD10EZEX-00RKKA0, 80.00A80, max
UDMA/133
[ 2.487479] ata5.00: 1953525168 sectors, multi 16: LBA48
NCQ (depth 32), AA
[ 2.488344] ata5.00: configured for UDMA/133
[ 2.494668] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.495525] ata6.00: ATA-8: WDC WD10EFRX-68JCSN0, 01.01A01, max
UDMA/133
[ 2.495528] ata6.00: 1953525168 sectors, multi 16: LBA48
NCQ (depth 32), AA
[ 2.497395] ata6.00: configured for UDMA/133
[ 4.180048] ata1: SATA link down (SStatus 0 SControl 0)
[ 6.232054] ata2: SATA link down (SStatus 0 SControl 0)
[ 35.789042] pata_legacy: loading out-of-tree module taints kernel.
[ 35.803204] scsi host6: pata_legacy
[ 35.810623] ata7: PATA max
PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[ 35.979225] ata7.00: ATA-0: PQI IDE DiskOnModule, 060729DA, max
MWDMA2
[ 35.985771] ata7.00: 512000 sectors, multi 0: LBA
[ 35.990552] ata7.00: configured for PIO
[ 36.082613] scsi host7: pata_legacy
[ 36.090168] ata8: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
---8<---
Thx in advance
Benedikt Spranger
Reply to: