Bug#904043: arm: Enable CONFIG_SPI_SPIDEV
Package: src:linux
Version: 4.18~rc4-1~exp1
Severity: normal
Please enable CONFIG_SPI_SPIDEV, at least for arm and arm64.
-- Package-specific info:
** Version:
Linux version 4.18.0-rc4-arm64 (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-24)) #1 SMP Debian 4.18~rc4-1~exp1 (2018-07-12)
** Command line:
bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 dma.dmachans=0x7f35 bcm2709.boardrev=0xa020d3 bcm2709.serial=0x87e8561a bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=29 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=B8:27:EB:E8:56:1A vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=LABEL=root rw elevator=deadline fsck.repair=yes net.ifnames=0 cma=512M rootwait
** Tainted: E (8192)
* Unsigned module has been loaded.
** Model information
Device Tree model: Raspberry Pi 3 Model B Plus Rev 1.3
** Loaded modules:
rfcomm(E)
cpufreq_userspace(E)
cpufreq_conservative(E)
cpufreq_ondemand(E)
cpufreq_powersave(E)
8021q(E)
garp(E)
mrp(E)
stp(E)
llc(E)
iptable_nat(E)
nf_nat_ipv4(E)
nf_nat(E)
iptable_mangle(E)
iptable_filter(E)
bnep(E)
nls_ascii(E)
nls_cp437(E)
vfat(E)
fat(E)
btsdio(E)
bluetooth(E)
microchip(E)
vc4(E)
snd_soc_core(E)
drbg(E)
ansi_cprng(E)
lan78xx(E)
snd_pcm_dmaengine(E)
snd_pcm(E)
ecdh_generic(E)
of_mdio(E)
snd_timer(E)
brcmfmac(E)
fixed_phy(E)
libphy(E)
brcmutil(E)
sg(E)
snd(E)
cfg80211(E)
soundcore(E)
rfkill(E)
cec(E)
drm_kms_helper(E)
drm(E)
pwm_bcm2835(E)
bcm2835_thermal(E)
bcm2835_rng(E)
rng_core(E)
bcm2835_wdt(E)
leds_gpio(E)
nf_conntrack_ipv6(E)
nf_defrag_ipv6(E)
nf_conntrack_ipv4(E)
nf_defrag_ipv4(E)
nft_reject_inet(E)
nf_reject_ipv4(E)
nf_reject_ipv6(E)
nft_reject(E)
nft_ct(E)
nf_conntrack(E)
nft_counter(E)
nft_set_bitmap(E)
nft_set_hash(E)
nft_set_rbtree(E)
nf_tables(E)
nfnetlink(E)
nfsd(E)
auth_rpcgss(E)
nfs_acl(E)
lockd(E)
grace(E)
sunrpc(E)
ip_tables(E)
x_tables(E)
autofs4(E)
ext4(E)
crc16(E)
mbcache(E)
jbd2(E)
fscrypto(E)
ecb(E)
aes_arm64(E)
sd_mod(E)
uas(E)
usb_storage(E)
scsi_mod(E)
btrfs(E)
xor(E)
zstd_decompress(E)
zstd_compress(E)
xxhash(E)
raid6_pq(E)
libcrc32c(E)
crc32c_generic(E)
dwc2(E)
udc_core(E)
sdhci_iproc(E)
usbcore(E)
sdhci_pltfm(E)
usb_common(E)
sdhci(E)
i2c_bcm2835(E)
bcm2835(E)
phy_generic(E)
** PCI devices:
** USB devices:
Bus 001 Device 004: ID 1a4a:1670 Silicon Image
Bus 001 Device 006: ID 1058:10a8 Western Digital Technologies, Inc. Elements Portable (WDBUZG)
Bus 001 Device 005: ID 0424:7800 Standard Microsystems Corp.
Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: buster/sid
APT prefers testing
APT policy: (990, 'testing'), (1, 'experimental')
Architecture: arm64 (aarch64)
Kernel: Linux 4.18.0-rc4-arm64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.18.0-rc4-arm64-unsigned depends on:
ii initramfs-tools [linux-initramfs-tool] 0.130
ii kmod 25-1
ii linux-base 4.5
Versions of packages linux-image-4.18.0-rc4-arm64-unsigned recommends:
ii apparmor 2.12-5
ii firmware-linux-free 3.4
ii irqbalance 1.3.0-0.1+b1
Versions of packages linux-image-4.18.0-rc4-arm64-unsigned suggests:
pn debian-kernel-handbook <none>
pn linux-doc-4.18 <none>
Versions of packages linux-image-4.18.0-rc4-arm64-unsigned is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 20170823-1
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: