Your message dated Fri, 6 Jul 2018 10:19:32 +0800 with message-id <CAG+qr1Hkc8qsRZ7svd11sfCWfxP2=1rNnoiioPDhxNXi3rGKXw@mail.gmail.com> and subject line Re: Bug#902966: pstore: crypto_comp_decompress failed has caused the Debian Bug report #902966, regarding pstore: crypto_comp_decompress failed to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 902966: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=902966 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: pstore: crypto_comp_decompress failed
- From: Shengjing Zhu <i@zhsj.me>
- Date: Wed, 4 Jul 2018 11:11:03 +0800
- Message-id: <[🔎] 20180704031057.GA3832@debian>
Package: src:linux Version: 4.17.3-1 Severity: normal Dear Maintainer, Updating to 4.17, dmesg shows pstore: crypto_comp_decompress failed I didn't know what's pstore used for, maybe efi? Looking at config, maybe some pstore_*_compress should be set? grep -i pstore /boot/config-4.17.0-1-amd64 CONFIG_CHROMEOS_PSTORE=m CONFIG_EFI_VARS_PSTORE=m # CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set CONFIG_PSTORE=y CONFIG_PSTORE_DEFLATE_COMPRESS=y # CONFIG_PSTORE_LZO_COMPRESS is not set # CONFIG_PSTORE_LZ4_COMPRESS is not set # CONFIG_PSTORE_LZ4HC_COMPRESS is not set # CONFIG_PSTORE_842_COMPRESS is not set CONFIG_PSTORE_COMPRESS=y CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y CONFIG_PSTORE_COMPRESS_DEFAULT="deflate" # CONFIG_PSTORE_CONSOLE is not set # CONFIG_PSTORE_PMSG is not set # CONFIG_PSTORE_FTRACE is not set CONFIG_PSTORE_RAM=m -- Package-specific info: ** Version: Linux version 4.17.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-24)) #1 SMP Debian 4.17.3-1 (2018-07-02) ** Command line: initrd=\EFI\debian\initrd.img root=PARTUUID=71249354-e7c1-4e69-bd05-608837ff5c42 rootfstype=ext4 ** Tainted: C (1024) * Module from drivers/staging has been loaded. ** Kernel log: [ 3.979407] pstore: decompression failed: -22 [ 3.979479] pstore: crypto_comp_decompress failed, ret = -22! [ 3.979479] pstore: decompression failed: -22 [ 3.979551] pstore: crypto_comp_decompress failed, ret = -22! [ 3.979552] pstore: decompression failed: -22 [ 3.979624] pstore: crypto_comp_decompress failed, ret = -22! [ 3.993509] intel_rapl: Found RAPL domain package [ 3.994563] pstore: decompression failed: -22 [ 3.995407] intel_rapl: Found RAPL domain core [ 3.996682] pstore: crypto_comp_decompress failed, ret = -22! [ 3.997418] intel_rapl: Found RAPL domain uncore [ 3.998554] pstore: decompression failed: -22 [ 3.998645] pstore: crypto_comp_decompress failed, ret = -22! [ 3.999333] intel_rapl: Found RAPL domain dram [ 4.000469] pstore: decompression failed: -22 [ 4.117259] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4350-pcie for chip BCM4350/8 [ 4.117743] pstore: Registered efi as persistent store backend [ 4.118512] brcmfmac 0000:3a:00.0: firmware: failed to load brcm/brcmfmac4350-pcie.clm_blob (-2) [ 4.319451] brcmfmac 0000:3a:00.0: Direct firmware load for brcm/brcmfmac4350-pcie.clm_blob failed with error -2 [ 4.319453] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 4.319926] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input13 [ 4.320113] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4350/8 wl0: Oct 22 2015 06:16:26 version 7.35.180.119 (r594535) FWID 01-e791c176 [ 4.342410] Adding 3906556k swap on /dev/nvme0n1p4. Priority:-2 extents:1 across:3906556k SSFS [ 4.376820] EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null) [ 4.378394] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 4.381003] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 4.381050] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 4.381093] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 4.381135] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 4.381177] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 4.381220] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 4.523423] brcmfmac 0000:3a:00.0 wlp58s0: renamed from wlan0 [ 4.552166] input: DLL0704:01 06CB:76AE Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL0704:01/0018:06CB:76AE.0002/input/input21 [ 4.553357] hid-multitouch 0018:06CB:76AE.0002: input,hidraw1: I2C HID v1.00 Mouse [DLL0704:01 06CB:76AE] on i2c-DLL0704:01 [ 4.662333] media: Linux media interface: v0.10 [ 4.672019] Linux video capture interface: v2.00 [ 4.725124] tun: Universal TUN/TAP device driver, 1.6 [ 4.725831] Bluetooth: Core ver 2.22 [ 4.727165] NET: Registered protocol family 31 [ 4.728338] Bluetooth: HCI device and connection manager initialized [ 4.729884] Bluetooth: HCI socket layer initialized [ 4.731053] Bluetooth: L2CAP socket layer initialized [ 4.731804] Bluetooth: SCO socket layer initialized [ 4.735967] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c) [ 4.769924] usbcore: registered new interface driver btusb [ 4.787516] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized! [ 4.788399] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized! [ 4.789657] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized! [ 4.790470] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized! [ 4.791379] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input26 [ 4.792316] usbcore: registered new interface driver uvcvideo [ 4.793357] USB Video Class driver (1.1.1) [ 4.881632] Bluetooth: hci0: BCM: chip id 110 [ 4.883627] Bluetooth: hci0: BCM: features 0x2f [ 4.900634] Bluetooth: hci0: zsj-debian [ 4.902625] Bluetooth: hci0: BCM (003.006.007) build 1703 [ 4.904055] bluetooth hci0: firmware: direct-loading firmware brcm/BCM-0a5c-6412.hcd [ 4.947906] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.950157] Bluetooth: BNEP filters: protocol multicast [ 4.952791] Bluetooth: BNEP socket layer initialized [ 5.154289] ashmem_linux: module is from the staging directory, the quality is unknown, you have been warned. [ 5.156239] ashmem: initialized [ 5.256620] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 5.420723] Bluetooth: hci0: BCM (003.006.007) build 1703 [ 5.437664] Bluetooth: hci0: Dell DW1820A [ 5.508113] loop: module loaded [ 5.528104] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 5.828800] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 5.874916] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 6.409331] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 6.631124] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 11.202581] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 11.206533] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 11.278246] NET: Registered protocol family 15 [ 11.298641] Initializing XFRM netlink socket [ 11.747299] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 12.040031] Bluetooth: RFCOMM TTY layer initialized [ 12.040043] Bluetooth: RFCOMM socket layer initialized [ 12.040049] Bluetooth: RFCOMM ver 1.11 [ 15.588427] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 15.635399] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 16.166861] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 19.910628] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 26.944286] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [ 154.327150] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 154.327169] Bluetooth: HIDP socket layer initialized [ 154.329056] hid-generic 0005:046D:B00E.0003: unknown main item tag 0x0 [ 154.329446] input: Dell Travel Mouse WM524 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/bluetooth/hci0/hci0:11/0005:046D:B00E.0003/input/input27 [ 154.330175] hid-generic 0005:046D:B00E.0003: input,hidraw2: BLUETOOTH HID v8.00 Mouse [Dell Travel Mouse WM524] on 30:52:cb:e8:1d:3c [ 163.663292] Bridge firewalling registered [ 163.768102] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 254.460860] Bluetooth: hci0: advertising data len corrected [ 791.473982] usb 1-1: new full-speed USB device number 5 using xhci_hcd [ 791.624308] usb 1-1: New USB device found, idVendor=1050, idProduct=0407, bcdDevice= 4.28 [ 791.624319] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 791.624325] usb 1-1: Product: Yubikey 4 OTP+U2F+CCID [ 791.624331] usb 1-1: Manufacturer: Yubico [ 791.628102] input: Yubico Yubikey 4 OTP+U2F+CCID as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:1050:0407.0004/input/input28 [ 791.686710] hid-generic 0003:1050:0407.0004: input,hidraw3: USB HID v1.10 Keyboard [Yubico Yubikey 4 OTP+U2F+CCID] on usb-0000:00:14.0-1/input0 [ 791.687775] hid-generic 0003:1050:0407.0005: hiddev0,hidraw4: USB HID v1.10 Device [Yubico Yubikey 4 OTP+U2F+CCID] on usb-0000:00:14.0-1/input1 ** Model information sys_vendor: Dell Inc. product_name: XPS 13 9350 product_version: chassis_vendor: Dell Inc. chassis_version: bios_vendor: Dell Inc. bios_version: 1.6.1 board_vendor: Dell Inc. board_name: 020NRM board_version: A03 ** Loaded modules: nf_conntrack_netlink nfnetlink xt_addrtype xt_conntrack br_netfilter hidp rfcomm xfrm_user xfrm4_tunnel tunnel4 ipcomp xfrm_ipcomp esp4 ah4 af_key xfrm_algo overlay squashfs zstd_decompress xxhash cmac loop xt_CHECKSUM iptable_mangle xt_tcpudp xt_comment bridge stp llc iptable_filter binder_linux ashmem_linux(C) bnep ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack libcrc32c crc32c_generic btusb btrtl btbcm btintel uvcvideo tun bluetooth videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common drbg videodev media ansi_cprng ecdh_generic hid_multitouch nls_ascii nls_cp437 vfat fat snd_hda_codec_hdmi wmi_bmof dell_wmi intel_rapl x86_pkg_temp_thermal intel_powerclamp dell_laptop dell_smbios dcdbas coretemp dell_wmi_descriptor snd_hda_codec_realtek snd_hda_codec_generic snd_soc_skl snd_soc_skl_ipc snd_hda_ext_core snd_soc_sst_dsp kvm_intel snd_soc_sst_ipc snd_soc_acpi snd_soc_core snd_compress kvm irqbypass crct10dif_pclmul crc32_pclmul efi_pstore ghash_clmulni_intel brcmfmac brcmutil intel_cstate cfg80211 rtsx_pci_ms snd_hda_intel memstick rfkill snd_hda_codec intel_uncore intel_rapl_perf snd_hda_core snd_hwdep pcspkr joydev efivars snd_pcm serio_raw idma64 iTCO_wdt snd_timer iTCO_vendor_support snd mei_me soundcore intel_lpss_pci processor_thermal_device mei shpchp intel_lpss intel_pch_thermal intel_soc_dts_iosf wmi battery intel_hid acpi_pad sparse_keymap int3400_thermal int3403_thermal acpi_thermal_rel int340x_thermal_zone ac evdev parport_pc ppdev lp parport efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 fscrypto hid_generic usbhid rtsx_pci_sdmmc mmc_core crc32c_intel nvme xhci_pci aesni_intel xhci_hcd aes_x86_64 crypto_simd i915 i2c_algo_bit cryptd glue_helper drm_kms_helper psmouse i2c_i801 nvme_core usbcore rtsx_pci drm usb_common i2c_hid thermal fan hid video button ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Skylake Host Bridge/DRAM Registers [8086:1904] (rev 08) Subsystem: Dell Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers [1028:0704] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: skl_uncore 00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 520 [8086:1916] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Dell Skylake GT2 [HD Graphics 520] [1028:0704] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 124 Region 0: Memory at db000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at 90000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at f000 [size=64] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:04.0 Signal processing controller [1180]: Intel Corporation Skylake Processor Thermal Subsystem [8086:1903] (rev 08) Subsystem: Dell Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem [1028:0704] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 16 Region 0: Memory at dc720000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: proc_thermal Kernel modules: processor_thermal_device 00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller [8086:9d2f] (rev 21) (prog-if 30 [XHCI]) Subsystem: Dell Sunrise Point-LP USB 3.0 xHCI Controller [1028:0704] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 125 Region 0: Memory at dc710000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Thermal subsystem [8086:9d31] (rev 21) Subsystem: Dell Sunrise Point-LP Thermal subsystem [1028:0704] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at dc734000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel_pch_thermal Kernel modules: intel_pch_thermal 00:15.0 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 [8086:9d60] (rev 21) Subsystem: Dell Sunrise Point-LP Serial IO I2C Controller [1028:0704] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at dc733000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel-lpss Kernel modules: intel_lpss_pci 00:15.1 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1 [8086:9d61] (rev 21) Subsystem: Dell Sunrise Point-LP Serial IO I2C Controller [1028:0704] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at dc732000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel-lpss Kernel modules: intel_lpss_pci 00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI #1 [8086:9d3a] (rev 21) Subsystem: Dell Sunrise Point-LP CSME HECI [1028:0704] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 130 Region 0: Memory at dc731000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: mei_me Kernel modules: mei_me 00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port [8086:9d10] (rev f1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=01, subordinate=39, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: c4000000-da0fffff Prefetchable memory behind bridge: 00000000a0000000-00000000c1ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.4 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 [8086:9d14] (rev f1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=3a, subordinate=3a, sec-latency=0 Memory behind bridge: dc000000-dc4fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.5 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 [8086:9d15] (rev f1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Bus: primary=00, secondary=3b, subordinate=3b, sec-latency=0 Memory behind bridge: dc600000-dc6fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 [8086:9d18] (rev f1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=3c, subordinate=3c, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: dc500000-dc5fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-LP LPC Controller [8086:9d48] (rev 21) Subsystem: Dell Sunrise Point-LP LPC Controller [1028:0704] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC [8086:9d21] (rev 21) Subsystem: Dell Sunrise Point-LP PMC [1028:0704] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at dc72c000 (32-bit, non-prefetchable) [disabled] [size=16K] 00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD Audio [8086:9d70] (rev 21) (prog-if 80) Subsystem: Dell Sunrise Point-LP HD Audio [1028:0704] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 131 Region 0: Memory at dc728000 (64-bit, non-prefetchable) [size=16K] Region 4: Memory at dc700000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel, snd_soc_skl 00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus [8086:9d23] (rev 21) Subsystem: Dell Sunrise Point-LP SMBus [1028:0704] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 16 Region 0: Memory at dc730000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at f040 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c_i801 3a:00.0 Network controller [0280]: Broadcom Limited BCM4350 802.11ac Wireless Network Adapter [14e4:43a3] (rev 08) Subsystem: Dell BCM4350 802.11ac Wireless Network Adapter [1028:0021] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 132 Region 0: Memory at dc400000 (64-bit, non-prefetchable) [size=32K] Region 2: Memory at dc000000 (64-bit, non-prefetchable) [size=4M] Capabilities: <access denied> Kernel driver in use: brcmfmac Kernel modules: brcmfmac 3b:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader [10ec:525a] (rev 01) Subsystem: Dell RTS525A PCI Express Card Reader [1028:0704] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 122 Region 1: Memory at dc600000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: rtsx_pci Kernel modules: rtsx_pci 3c:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller [144d:a802] (rev 01) (prog-if 02 [NVM Express]) Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller SM951/PM951 [144d:a801] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 NUMA node: 0 Region 0: Memory at dc500000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at e000 [size=256] Capabilities: <access denied> Kernel driver in use: nvme Kernel modules: nvme ** USB devices: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0c45:670c Microdia Bus 001 Device 003: ID 0a5c:6412 Broadcom Corp. Bus 001 Device 002: ID 0853:0111 Topre Corporation Bus 001 Device 005: ID 1050:0407 Yubico.com Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (500, 'testing'), (100, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.17.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=zh_CN.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.17.0-1-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.130 ii kmod 25-1 ii linux-base 4.5 Versions of packages linux-image-4.17.0-1-amd64 recommends: pn apparmor <none> ii firmware-linux-free 3.4 ii irqbalance 1.3.0-0.1+b1 Versions of packages linux-image-4.17.0-1-amd64 suggests: pn debian-kernel-handbook <none> ii grub-efi-amd64 2.02+dfsg1-4 pn linux-doc-4.17 <none> Versions of packages linux-image-4.17.0-1-amd64 is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> ii firmware-brcm80211 20170823-1 pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> ii firmware-misc-nonfree 20170823-1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf informationAttachment: signature.asc
Description: PGP signature
--- End Message ---
--- Begin Message ---
- To: 902966-done@bugs.debian.org
- Subject: Re: Bug#902966: pstore: crypto_comp_decompress failed
- From: Shengjing Zhu <i@zhsj.me>
- Date: Fri, 6 Jul 2018 10:19:32 +0800
- Message-id: <CAG+qr1Hkc8qsRZ7svd11sfCWfxP2=1rNnoiioPDhxNXi3rGKXw@mail.gmail.com>
So I find this blog https://myn.meganecco.org/1524119100.html saying just removing files in /sys/fs/pstore I checked files there, $ sudo ls -lh /sys/fs/pstore -r--r--r-- 1 root root 669 May 28 17:16 dmesg-efi-152749897702001.enc.z -r--r--r-- 1 root root 962 May 28 17:16 dmesg-efi-152749897703001.enc.z -r--r--r-- 1 root root 736 May 28 17:16 dmesg-efi-152749897704001.enc.z ... $ sudo file /sys/fs/pstore/dmesg-efi-152749897702001.enc.z dmesg-efi-152749897702001.enc.z: zlib compressed data $ $ printf "\x1f\x8b\x08\x00\x00\x00\x00\x00" |cat - dmesg-efi-152749897702001.enc.z |gzip -dc Oops#1 Part2 <4>[346295.732620] mei_me intel_lpss_pci mei intel_lpss shpchp processor_thermal_device intel_soc_dts_iosf wmi int3403_thermal int340x_thermal_zone battery ac intel_hid acpi_pad int3400_thermal sparse_keymap acpi_thermal_rel evdev parport_pc ppdev lp parport efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 fscrypto hid_generic usbhid rtsx_pci_sdmmc mmc_core crc32c_intel aesni_intel aes_x86_64 crypto_simd cryptd glue_helper i915 xhci_pci psmouse i2c_algo_bit xhci_hcd drm_kms_helper nvme i2c_i801 nvme_core rtsx_pci usbcore drm usb_common fan thermal i2c_hid hid video button <4>[346295.732671] CPU: 1 PID: 1563 Comm: AsyncTask #2 Tainted: G O 4.16.0-1-amd64 #1 Debian 4.16.5-1 <4>[346295.732673] Hardware name: Dell Inc. XPS 13 9350/020NRM, BIOS 1.6.1 12/14/2017 <4>[346295.732677] RIP: 0010:memcpy_erms+0x6/0x10 <4>[346295.732679] RSP: 0018:ffffaa4b882f3ca8 EFLAGS: 00010206 ... files are not corrupted. After removing these zlib files and reboot, there's no error now. Hope this helps people confused like me after upgrading to 4.17 -- Best regards, Shengjing Zhu
--- End Message ---