Bug#902229: linux-image-4.16.0-2-amd64: Intel HDA not detected by pulseaudio (shows 0 cards) but is available through ALSA
Package: src:linux
Version: 4.16.12-1
Severity: important
Dear Maintainer,
after upgrading and rebooting to linux-image-4.16.0-2-amd64 4.16.12-1 my
sound card stop working in pulse audio (I'm using KDE as desktop).
ALSA can still see and use the card without problems, but pulse see no
cards.
If I reboot with the previous version (linux-image-4.16.0-2-amd64
4.16.12-1) all works as expected again without any further changes.
I haven't tried yet the new (unstable) version 4.16.16-2, but I will and
report back.
Here is the output of pacmd and aplay to list cards, devices, sinks.
Please let me know if there is anything else I can provide.
$ pacmd list-cards
0 card(s) available.
$ pacmd list-sinks
1 sink(s) available.
* index: 0
name: <auto_null>
driver: <module-null-sink.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: IDLE
suspend cause:
priority: 1000
volume: front-left: 62259 / 95% / -1.34 dB, front-right: 62259 / 95% / -1.34 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 26.33 ms
max request: 6 KiB
max rewind: 6 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 1
configured latency: 40.00 ms; range is 0.50 .. 2000.00 ms
module: 12
properties:
device.description = "Dummy Output"
device.class = "abstract"
device.icon_name = "audio-card"
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC3266 Analog [ALC3266 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4]
Subdevices: 1/1
Subdevice #0: subdevice #0
$ aplay -L
default
Playback/recording through the PulseAudio sound server
null
Discard all samples (playback) or generate zero samples (capture)
sysdefault:CARD=PCH
HDA Intel PCH, ALC3266 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC3266 Analog
Front speakers
surround21:CARD=PCH,DEV=0
HDA Intel PCH, ALC3266 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC3266 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC3266 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC3266 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC3266 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC3266 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
HDA Intel PCH, HDMI 0
HDMI Audio Output
hdmi:CARD=PCH,DEV=1
HDA Intel PCH, HDMI 1
HDMI Audio Output
hdmi:CARD=PCH,DEV=2
HDA Intel PCH, HDMI 2
HDMI Audio Output
hdmi:CARD=PCH,DEV=3
HDA Intel PCH, HDMI 3
HDMI Audio Output
hdmi:CARD=PCH,DEV=4
HDA Intel PCH, HDMI 4
HDMI Audio Output
dmix:CARD=PCH,DEV=0
HDA Intel PCH, ALC3266 Analog
Direct sample mixing device
dmix:CARD=PCH,DEV=3
HDA Intel PCH, HDMI 0
Direct sample mixing device
dmix:CARD=PCH,DEV=7
HDA Intel PCH, HDMI 1
Direct sample mixing device
dmix:CARD=PCH,DEV=8
HDA Intel PCH, HDMI 2
Direct sample mixing device
dmix:CARD=PCH,DEV=9
HDA Intel PCH, HDMI 3
Direct sample mixing device
dmix:CARD=PCH,DEV=10
HDA Intel PCH, HDMI 4
Direct sample mixing device
dsnoop:CARD=PCH,DEV=0
HDA Intel PCH, ALC3266 Analog
Direct sample snooping device
dsnoop:CARD=PCH,DEV=3
HDA Intel PCH, HDMI 0
Direct sample snooping device
dsnoop:CARD=PCH,DEV=7
HDA Intel PCH, HDMI 1
Direct sample snooping device
dsnoop:CARD=PCH,DEV=8
HDA Intel PCH, HDMI 2
Direct sample snooping device
dsnoop:CARD=PCH,DEV=9
HDA Intel PCH, HDMI 3
Direct sample snooping device
dsnoop:CARD=PCH,DEV=10
HDA Intel PCH, HDMI 4
Direct sample snooping device
hw:CARD=PCH,DEV=0
HDA Intel PCH, ALC3266 Analog
Direct hardware device without any conversions
hw:CARD=PCH,DEV=3
HDA Intel PCH, HDMI 0
Direct hardware device without any conversions
hw:CARD=PCH,DEV=7
HDA Intel PCH, HDMI 1
Direct hardware device without any conversions
hw:CARD=PCH,DEV=8
HDA Intel PCH, HDMI 2
Direct hardware device without any conversions
hw:CARD=PCH,DEV=9
HDA Intel PCH, HDMI 3
Direct hardware device without any conversions
hw:CARD=PCH,DEV=10
HDA Intel PCH, HDMI 4
Direct hardware device without any conversions
plughw:CARD=PCH,DEV=0
HDA Intel PCH, ALC3266 Analog
Hardware device with all software conversions
plughw:CARD=PCH,DEV=3
HDA Intel PCH, HDMI 0
Hardware device with all software conversions
plughw:CARD=PCH,DEV=7
HDA Intel PCH, HDMI 1
Hardware device with all software conversions
plughw:CARD=PCH,DEV=8
HDA Intel PCH, HDMI 2
Hardware device with all software conversions
plughw:CARD=PCH,DEV=9
HDA Intel PCH, HDMI 3
Hardware device with all software conversions
plughw:CARD=PCH,DEV=10
HDA Intel PCH, HDMI 4
Hardware device with all software conversions
ii linux-image-4.16.0-1-amd64 4.16.5-1 amd64 Linux 4.16 for 64-bit PCs
ii amd64 Linux 4.16 for 64-bit PCs
-- Package-specific info:
** Version:
Linux version 4.16.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-19)) #1 SMP Debian 4.16.12-1 (2018-05-27)
** Command line:
BOOT_IMAGE=/vmlinuz-4.16.0-2-amd64 root=/dev/mapper/vg-root ro i915.edp_vswing=2 acpi_rev_override=1 enable_psr=1 disable_power_well=0 pcie_port_pm=off modprobe.blacklist=nouveau
** Tainted: UO (4160)
* Userspace-defined naughtiness.
* Out-of-tree module has been loaded.
** Kernel log:
[ 326.789098] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[ 326.815666] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
[ 326.817254] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 326.832811] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
[ 326.832847] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input12
[ 326.832984] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 326.840793] input: DLL07BE:01 06CB:7A13 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL07BE:01/0018:06CB:7A13.0001/input/input14
[ 326.840856] hid-multitouch 0018:06CB:7A13.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL07BE:01 06CB:7A13] on i2c-DLL07BE:01
[ 326.842081] fbcon: inteldrmfb (fb0) is primary device
[ 326.871230] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3266: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 326.871234] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 326.871238] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 326.871240] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 326.871242] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 326.871245] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x18
[ 326.871248] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 326.871250] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 326.936377] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 326.936485] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 326.936591] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[ 326.936685] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[ 326.936782] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[ 326.936873] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[ 327.109840] ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:02:00.0.bin (-2)
[ 327.109844] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:02:00.0.bin failed with error -2
[ 327.109863] ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/cal-pci-0000:02:00.0.bin (-2)
[ 327.109866] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/cal-pci-0000:02:00.0.bin failed with error -2
[ 327.113008] ath10k_pci 0000:02:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw3.0/firmware-6.bin
[ 327.113019] ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[ 327.113024] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[ 327.114294] ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.4.4-00022-QCARMSWPZ-2 api 6 features wowlan,ignore-otp crc32 4d458559
[ 327.179915] ath10k_pci 0000:02:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw3.0/board-2.bin
[ 327.180720] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 07ee144e
[ 327.607617] media: Linux media interface: v0.10
[ 327.612742] Linux video capture interface: v2.00
[ 327.616781] Bluetooth: Core ver 2.22
[ 327.616789] NET: Registered protocol family 31
[ 327.616790] Bluetooth: HCI device and connection manager initialized
[ 327.616792] Bluetooth: HCI socket layer initialized
[ 327.616794] Bluetooth: L2CAP socket layer initialized
[ 327.616797] Bluetooth: SCO socket layer initialized
[ 327.620603] usbcore: registered new interface driver btusb
[ 327.756266] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[ 327.757296] ath10k_pci 0000:02:00.0: htt-ver 3.32 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 327.838306] ath: EEPROM regdomain: 0x6c
[ 327.838307] ath: EEPROM indicates we should expect a direct regpair map
[ 327.838308] ath: Country alpha2 being used: 00
[ 327.838309] ath: Regpair used: 0x6c
[ 327.848099] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
[ 327.937194] Console: switching to colour frame buffer device 240x67
[ 327.966033] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 328.090645] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6713)
[ 328.117363] uvcvideo 1-12:1.0: Entity type for entity Extension 4 was not initialized!
[ 328.120987] uvcvideo 1-12:1.0: Entity type for entity Extension 3 was not initialized!
[ 328.120993] uvcvideo 1-12:1.0: Entity type for entity Processing 2 was not initialized!
[ 328.127823] uvcvideo 1-12:1.0: Entity type for entity Camera 1 was not initialized!
[ 328.128025] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/input/input25
[ 328.134615] usbcore: registered new interface driver uvcvideo
[ 328.134617] USB Video Class driver (1.1.1)
[ 328.168185] EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null)
[ 328.354749] audit: type=1400 audit(1529766947.931:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=800 comm="apparmor_parser"
[ 328.358531] audit: type=1400 audit(1529766947.931:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=798 comm="apparmor_parser"
[ 328.362574] audit: type=1400 audit(1529766947.931:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=797 comm="apparmor_parser"
[ 328.365616] audit: type=1400 audit(1529766947.935:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=796 comm="apparmor_parser"
[ 328.368446] audit: type=1400 audit(1529766947.935:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=796 comm="apparmor_parser"
[ 328.371355] audit: type=1400 audit(1529766947.935:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=796 comm="apparmor_parser"
[ 328.374194] audit: type=1400 audit(1529766947.935:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi" pid=803 comm="apparmor_parser"
[ 328.377529] audit: type=1400 audit(1529766947.939:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=803 comm="apparmor_parser"
[ 328.380427] audit: type=1400 audit(1529766947.939:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=801 comm="apparmor_parser"
[ 328.380438] audit: type=1400 audit(1529766947.939:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=804 comm="apparmor_parser"
[ 328.652660] bbswitch: loading out-of-tree module taints kernel.
[ 328.653818] bbswitch: version 0.8
[ 328.654863] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 328.655773] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[ 328.656570] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20180105/nsarguments-100)
[ 328.657469] bbswitch: detected an Optimus _DSM function
[ 328.659051] pci 0000:01:00.0: enabling device (0006 -> 0007)
[ 328.659925] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 328.661730] bbswitch: disabling discrete graphics
[ 328.700010] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 328.700011] Bluetooth: BNEP filters: protocol multicast
[ 328.700014] Bluetooth: BNEP socket layer initialized
[ 328.967387] input: lircd-uinput as /devices/virtual/input/input26
[ 329.228347] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 329.952548] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[ 330.005119] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 330.809338] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[ 330.862230] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 330.961385] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 335.876593] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 339.684089] Bluetooth: RFCOMM TTY layer initialized
[ 339.684104] Bluetooth: RFCOMM socket layer initialized
[ 339.684116] Bluetooth: RFCOMM ver 1.11
[ 340.824627] wlp2s0: authenticate with 82:2a:a8:cb:e8:e5
[ 340.858268] wlp2s0: send auth to 82:2a:a8:cb:e8:e5 (try 1/3)
[ 340.860600] wlp2s0: authenticated
[ 340.864572] wlp2s0: associate with 82:2a:a8:cb:e8:e5 (try 1/3)
[ 340.869313] wlp2s0: RX AssocResp from 82:2a:a8:cb:e8:e5 (capab=0x411 status=0 aid=3)
[ 340.872130] wlp2s0: associated
[ 340.887374] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
** Model information
sys_vendor: Dell Inc.
product_name: XPS 15 9560
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: 1.9.4
board_vendor: Dell Inc.
board_name: 05FFDN
board_version: A00
** Loaded modules:
ctr
ccm
rfcomm
uinput
snd_hrtimer
snd_seq
snd_seq_device
cmac
bnep
bbswitch(O)
nls_ascii
nls_cp437
vfat
fat
arc4
uvcvideo
btusb
btrtl
videobuf2_vmalloc
btbcm
videobuf2_memops
btintel
videobuf2_v4l2
videobuf2_common
videodev
bluetooth
media
drbg
ansi_cprng
ecdh_generic
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_codec_generic
ath10k_pci
ath10k_core
ath
mac80211
msr
hid_multitouch
hid_generic
cfg80211
rtsx_pci_ms
memstick
dell_laptop
dell_wmi
wmi_bmof
rfkill
mxm_wmi
dell_smbios
intel_rapl
x86_pkg_temp_thermal
intel_powerclamp
dell_wmi_descriptor
dcdbas
dell_smm_hwmon
kvm_intel
snd_hda_intel
i915
snd_hda_codec
kvm
snd_hda_core
irqbypass
snd_hwdep
intel_cstate
snd_pcm
intel_uncore
snd_timer
iTCO_wdt
efi_pstore
joydev
evdev
drm_kms_helper
snd
tpm_crb
intel_rapl_perf
idma64
pcspkr
iTCO_vendor_support
serio_raw
efivars
soundcore
mei_me
drm
intel_lpss_pci
mei
i2c_algo_bit
processor_thermal_device
shpchp
intel_lpss
intel_soc_dts_iosf
intel_pch_thermal
battery
tpm_tis
tpm_tis_core
tpm
rng_core
wmi
intel_hid
video
int3400_thermal
acpi_thermal_rel
int3403_thermal
ac
sparse_keymap
int340x_thermal_zone
acpi_pad
button
coretemp
parport_pc
ppdev
lp
parport
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
algif_skcipher
af_alg
dm_crypt
dm_mod
crct10dif_pclmul
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
pcbc
rtsx_pci_sdmmc
ahci
xhci_pci
mmc_core
aesni_intel
libahci
xhci_hcd
aes_x86_64
crypto_simd
nvme
glue_helper
libata
cryptd
psmouse
i2c_i801
rtsx_pci
usbcore
i2c_hid
scsi_mod
nvme_core
usb_common
thermal
hid
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [8086:5910] (rev 05)
Subsystem: Dell Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [1028:07be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Skylake PCIe Controller (x16) [8086:1901] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: ec000000-ed0fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:591b] (rev 04) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:07be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 138
Region 0: Memory at eb000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:04.0 Signal processing controller [1180]: Intel Corporation Skylake Processor Thermal Subsystem [8086:1903] (rev 05)
Subsystem: Dell Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem [1028:07be]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ed120000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: proc_thermal
Kernel modules: processor_thermal_device
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller [8086:a12f] (rev 31) (prog-if 30 [XHCI])
Subsystem: Dell Sunrise Point-H USB 3.0 xHCI Controller [1028:07be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 128
Region 0: Memory at ed110000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-H Thermal subsystem [8086:a131] (rev 31)
Subsystem: Dell Sunrise Point-H Thermal subsystem [1028:07be]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at ed138000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:15.0 Signal processing controller [1180]: Intel Corporation Sunrise Point-H Serial IO I2C Controller #0 [8086:a160] (rev 31)
Subsystem: Dell Sunrise Point-H Serial IO I2C Controller [1028:07be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ed137000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:15.1 Signal processing controller [1180]: Intel Corporation Sunrise Point-H Serial IO I2C Controller #1 [8086:a161] (rev 31)
Subsystem: Dell Sunrise Point-H Serial IO I2C Controller [1028:07be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at ed136000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-H CSME HECI #1 [8086:a13a] (rev 31)
Subsystem: Dell Sunrise Point-H CSME HECI [1028:07be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 137
Region 0: Memory at ed135000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] [8086:a103] (rev 31) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Sunrise Point-H SATA Controller [AHCI mode] [1028:07be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 129
Region 0: Memory at ed130000 (32-bit, non-prefetchable) [size=8K]
Region 1: Memory at ed134000 (32-bit, non-prefetchable) [size=256]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at ed133000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #1 [8086:a110] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 122
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: ed200000-ed3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #2 [8086:a111] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 123
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: ed400000-eddfffff
Prefetchable memory behind bridge: 00000000d2100000-00000000d2afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #9 [8086:a118] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 124
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: ede00000-edefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.4 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #13 [8086:a11c] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.6 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #15 [8086:a11e] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 125
Bus: primary=00, secondary=06, subordinate=3e, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d4000000-ea0fffff
Prefetchable memory behind bridge: 0000000090000000-00000000b1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-H LPC Controller [8086:a152] (rev 31)
Subsystem: Dell Sunrise Point-H LPC Controller [1028:07be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-H PMC [8086:a121] (rev 31)
Subsystem: Dell Sunrise Point-H PMC [1028:07be]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at ed12c000 (32-bit, non-prefetchable) [disabled] [size=16K]
00:1f.3 Audio device [0403]: Intel Corporation CM238 HD Audio Controller [8086:a171] (rev 31) (prog-if 80)
Subsystem: Dell CM238 HD Audio Controller [1028:07be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin B routed to IRQ 140
Region 0: Memory at ed128000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at ed100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-H SMBus [8086:a123] (rev 31)
Subsystem: Dell Sunrise Point-H SMBus [1028:07be]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ed132000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 3D controller [0302]: NVIDIA Corporation GP107M [GeForce GTX 1050 Mobile] [10de:1c8d] (rev ff) (prog-if ff)
!!! Unknown header type 7f
Kernel modules: nvidia
02:00.0 Network controller [0280]: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter [168c:003e] (rev 32)
Subsystem: Bigfoot Networks, Inc. QCA6174 802.11ac Wireless Network Adapter [1a56:1535]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 139
Region 0: Memory at ed200000 (64-bit, non-prefetchable) [size=2M]
Capabilities: <access denied>
Kernel driver in use: ath10k_pci
Kernel modules: ath10k_pci
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader [10ec:525a] (rev 01)
Subsystem: Dell RTS525A PCI Express Card Reader [1028:07be]
Physical Slot: 1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 126
Region 1: Memory at ed400000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
04:00.0 Non-Volatile memory controller [0108]: SK hynix Device [1c5c:1527] (prog-if 02 [NVM Express])
Subsystem: SK hynix Device [1c5c:1527]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at ede00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 0cf3:e300 Atheros Communications, Inc.
Bus 001 Device 003: ID 0c45:6713 Microdia
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: buster/sid
APT prefers testing
APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 4.16.0-2-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_IE.UTF-8, LC_CTYPE=en_IE.UTF-8 (charmap=UTF-8), LANGUAGE=en_IE:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.16.0-2-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.130
ii kmod 25-1
ii linux-base 4.5
Versions of packages linux-image-4.16.0-2-amd64 recommends:
ii apparmor 2.12-4
ii firmware-linux-free 3.4
ii irqbalance 1.3.0-0.1+b1
Versions of packages linux-image-4.16.0-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.02+dfsg1-4
pn linux-doc-4.16 <none>
Versions of packages linux-image-4.16.0-2-amd64 is related to:
pn firmware-amd-graphics <none>
ii firmware-atheros 20170823-1
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: