Bug#899301: linux-image-4.16.0-1-amd64: kernel crash more times a month, irreproducibly, does not dump
Package: src:linux
Version: 4.16.5-1
Severity: important
Dear Maintainer,
kernel crashes in different conditions, sometimes while I am not using the laptop.
I did a full scan of the memories several times and all seems fine.
I did not manage to obtain a crash log either,
My configuration is:
root@mozart:/etc# kdump-config show
DUMP_MODE: kdump
USE_KDUMP: 1
KDUMP_SYSCTL: kernel.panic_on_oops=1
KDUMP_COREDIR: /var/crash
crashkernel addr: 0x2d000000
/var/lib/kdump/vmlinuz: symbolic link to /boot/vmlinuz-4.16.0-1-amd64
kdump initrd:
/var/lib/kdump/initrd.img: symbolic link to /var/lib/kdump/initrd.img-4.16.0-1-amd64
current state: ready to kdump
kexec command:
/sbin/kexec -p --command-line="BOOT_IMAGE=/boot/vmlinuz-4.16.0-1-amd64 root=UUID=25ddc407-30ce-4dc1-8e68-11b7d4316955 ro quiet nr_cpus=1 systemd.unit=kdump-tools.service irqpoll nousb ata_piix.prefer_ms_hyperv=0" --initrd=/var/lib/kdump/initrd.img /var/lib/kdump/vmlinuz
Any suggestion is welcome.
Thank you
best regards
Fulvio Ciriaco
-- Package-specific info:
** Version:
Linux version 4.16.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-17)) #1 SMP Debian 4.16.5-1 (2018-04-29)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.16.0-1-amd64 root=UUID=25ddc407-30ce-4dc1-8e68-11b7d4316955 ro quiet crashkernel=384M-:128M crashkernel=384M-:128M crashkernel=384M-:128M crashkernel=384M-:128M
** Tainted: C (1024)
* Module from drivers/staging has been loaded.
** Kernel log:
[ 537.263770] pci_bus 0000:01: Allocating resources
[ 537.265455] acpi PNP0401:00: Already enumerated
[ 537.269554] acpi PNP0501:00: Still not present
[ 537.279064] PM: suspend exit
[ 537.344809] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 537.344823] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 537.344992] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
[ 537.841937] e1000e: eno1 NIC Link is Down
[ 537.842712] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 538.107170] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 538.111344] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
[ 538.199163] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 538.199177] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 538.199324] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
[ 538.247324] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
[ 557.044595] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 557.044601] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO
[ 557.044640] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 882.152570] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 882.152602] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 882.152879] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
[ 947.095540] usb 1-1: new high-speed USB device number 3 using xhci_hcd
[ 947.247720] usb 1-1: New USB device found, idVendor=048d, idProduct=1167
[ 947.247739] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 947.247743] usb 1-1: Product: USB Mass Storage Device
[ 947.247747] usb 1-1: Manufacturer: iTE Tech
[ 947.247751] usb 1-1: SerialNumber: 11042619006161
[ 947.350334] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 947.350610] scsi host6: usb-storage 1-1:1.0
[ 947.350704] usbcore: registered new interface driver usb-storage
[ 947.359946] usbcore: registered new interface driver uas
[ 948.356972] scsi 6:0:0:0: Direct-Access 0.00 PQ: 0 ANSI: 2
[ 948.357752] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 948.358475] sd 6:0:0:0: [sdb] 7892992 512-byte logical blocks: (4.04 GB/3.76 GiB)
[ 948.358605] sd 6:0:0:0: [sdb] Write Protect is off
[ 948.358607] sd 6:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 948.358768] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 948.358773] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 948.361394] sdb:
[ 948.370252] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 954.153651] UDF-fs: warning (device sdb): udf_load_vrs: No VRS found
[ 954.153655] UDF-fs: Scanning with blocksize 512 failed
[ 954.154188] UDF-fs: warning (device sdb): udf_load_vrs: No VRS found
[ 954.154191] UDF-fs: Scanning with blocksize 1024 failed
[ 954.154709] UDF-fs: warning (device sdb): udf_load_vrs: No VRS found
[ 954.154712] UDF-fs: Scanning with blocksize 2048 failed
[ 954.155853] UDF-fs: warning (device sdb): udf_load_vrs: No VRS found
[ 954.155857] UDF-fs: Scanning with blocksize 4096 failed
[ 954.165333] UDF-fs: warning (device sdb): udf_load_vrs: No VRS found
[ 954.165339] UDF-fs: Scanning with blocksize 512 failed
[ 954.166069] UDF-fs: warning (device sdb): udf_load_vrs: No VRS found
[ 954.166072] UDF-fs: Scanning with blocksize 1024 failed
[ 954.166759] UDF-fs: warning (device sdb): udf_load_vrs: No VRS found
[ 954.166762] UDF-fs: Scanning with blocksize 2048 failed
[ 954.167637] UDF-fs: warning (device sdb): udf_load_vrs: No VRS found
[ 954.167641] UDF-fs: Scanning with blocksize 4096 failed
[ 954.270957] ISOFS: Unable to identify CD-ROM format.
[ 954.361096] ISOFS: Unable to identify CD-ROM format.
[ 1005.907160] usb 1-1: USB disconnect, device number 3
[ 1197.152212] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1197.152232] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1197.152444] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
[ 1512.148115] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1512.148131] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1512.148315] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
[ 1827.134020] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1827.134041] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1827.134274] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
[ 2142.069322] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 2142.069335] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 2142.069509] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
[ 2457.077873] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 2457.077899] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 2457.078154] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
[ 2538.203855] usb 1-2: new high-speed USB device number 4 using xhci_hcd
[ 2538.356261] usb 1-2: New USB device found, idVendor=048d, idProduct=1167
[ 2538.356269] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2538.356274] usb 1-2: Product: USB Mass Storage Device
[ 2538.356278] usb 1-2: Manufacturer: iTE Tech
[ 2538.356282] usb 1-2: SerialNumber: 11042619006161
[ 2538.357361] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 2538.357688] scsi host6: usb-storage 1-2:1.0
[ 2539.389118] scsi 6:0:0:0: Direct-Access 0.00 PQ: 0 ANSI: 2
[ 2539.390495] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2539.390909] sd 6:0:0:0: [sdb] 7892992 512-byte logical blocks: (4.04 GB/3.76 GiB)
[ 2539.391083] sd 6:0:0:0: [sdb] Write Protect is off
[ 2539.391091] sd 6:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 2539.391282] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2539.391307] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2539.398020] sdb:
[ 2539.406651] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 2772.093216] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 2772.093245] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 2772.093493] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
[ 3087.044009] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 3087.044024] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 3087.044172] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
[ 3402.042033] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 3402.042061] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 3402.042311] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
** Model information
sys_vendor: Dell Inc.
product_name: Precision M4600
product_version: 01
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A08
board_vendor: Dell Inc.
board_name: 08V9YG
board_version: A00
** Loaded modules:
nls_iso8859_1
nls_cp437
vfat
fat
isofs
nls_utf8
udf
uas
usb_storage
fuse
appletalk
ax25
ipx(C)
p8023
p8022
psnap
llc
snd_hrtimer
snd_seq
snd_seq_device
bnep
binfmt_misc
arc4
brcmsmac
uvcvideo
cordic
brcmutil
b43
videobuf2_vmalloc
mac80211
videobuf2_memops
videobuf2_v4l2
cfg80211
videobuf2_common
videodev
ssb
media
dell_rbtn
snd_hda_codec_hdmi
pcmcia
intel_rapl
pcmcia_core
rng_core
x86_pkg_temp_thermal
intel_powerclamp
dell_laptop
coretemp
dell_wmi
dell_smbios
wmi_bmof
iTCO_wdt
iTCO_vendor_support
dcdbas
sparse_keymap
kvm_intel
dell_smm_hwmon
dell_wmi_descriptor
btusb
kvm
btrtl
btbcm
btintel
irqbypass
bluetooth
crct10dif_pclmul
crc32_pclmul
ghash_clmulni_intel
snd_hda_codec_idt
snd_hda_codec_generic
drbg
intel_cstate
intel_uncore
intel_rapl_perf
nouveau
snd_hda_intel
mxm_wmi
snd_hda_codec
ttm
snd_hda_core
drm_kms_helper
snd_hwdep
drm
snd_pcm
pcspkr
ansi_cprng
joydev
ecdh_generic
snd_timer
i2c_algo_bit
evdev
rfkill
serio_raw
bcma
snd
soundcore
wmi
battery
video
shpchp
lpc_ich
sg
ac
mei_me
mei
dell_smo8800
button
parport_pc
ppdev
lp
parport
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
fscrypto
ecb
btrfs
crc32c_generic
xor
zstd_decompress
zstd_compress
xxhash
raid6_pq
sr_mod
sd_mod
cdrom
hid_generic
usbhid
hid
crc32c_intel
aesni_intel
aes_x86_64
crypto_simd
ahci
cryptd
glue_helper
libahci
i2c_i801
psmouse
libata
firewire_ohci
scsi_mod
sdhci_pci
xhci_pci
cqhci
ehci_pci
sdhci
xhci_hcd
ehci_hcd
firewire_core
crc_itu_t
mmc_core
usbcore
e1000e
usb_common
thermal
** Network interface configuration:
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether d0:67:e5:47:b0:0d brd ff:ff:ff:ff:ff:ff
inet 193.204.182.180/25 brd 193.204.182.255 scope global noprefixroute eno1
valid_lft forever preferred_lft forever
inet6 fe80::a80a:ac19:ce68:8ad4/64 scope link noprefixroute
valid_lft forever preferred_lft forever
3: wlp3s0b1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether 0e:f5:f7:46:be:79 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
wlp3s0b1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
lo: 118668 1472 0 0 0 0 0 0 118668 1472 0 0 0 0 0 0
eno1: 23588535 213614 0 0 0 0 0 2310 27168325 29169 0 0 0 0 0 0
*** Protocol statistics:
Ip:
Forwarding: 2
33545 total packets received
5174 with invalid addresses
0 forwarded
0 incoming packets discarded
28371 incoming packets delivered
15152 requests sent out
362 outgoing packets dropped
4 dropped because of missing route
Icmp:
737 ICMP messages received
0 input ICMP message failed
ICMP input histogram:
destination unreachable: 732
echo requests: 5
741 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 736
echo replies: 5
IcmpMsg:
InType3: 732
InType8: 5
OutType0: 5
OutType3: 736
Tcp:
586 active connection openings
21 passive connection openings
6 failed connection attempts
6 connection resets received
1 connections established
16242 segments received
27663 segments sent out
330 segments retransmitted
7 bad segments received
261 resets sent
Udp:
2405 packets received
736 packets to unknown port received
2 packet receive errors
1833 packets sent
0 receive buffer errors
0 send buffer errors
InCsumErrors: 2
IgnoredMulti: 8199
UdpLite:
TcpExt:
4 resets received for embryonic SYN_RECV sockets
245 TCP sockets finished time wait in fast timer
314 delayed acks sent
Quick ack mode was activated 4 times
4091 packet headers predicted
2555 acknowledgments not containing data payload received
6849 predicted acknowledgments
TCPSackRecovery: 2
Detected reordering 6 times using SACK
Detected reordering 2 times using time stamp
2 congestion windows partially recovered using Hoe heuristic
1 congestion windows recovered without slow start after partial ack
TCPTimeouts: 79
TCPLossProbes: 17
TCPLossProbeRecovery: 2
TCPDSACKOldSent: 4
TCPDSACKRecv: 1
78 connections reset due to unexpected data
5 connections reset due to early user close
3 connections aborted due to timeout
TCPSackShifted: 1
TCPSackMerged: 2
TCPSackShiftFallback: 12
TCPRcvCoalesce: 2336
TCPOFOQueue: 160
TCPChallengeACK: 18
TCPSYNChallenge: 18
TCPAutoCorking: 24
TCPSynRetrans: 288
TCPOrigDataSent: 20224
TCPHystartTrainDetect: 1
TCPHystartTrainCwnd: 16
TCPKeepAlive: 1028
IpExt:
InMcastPkts: 1408
OutMcastPkts: 42
InBcastPkts: 8200
OutBcastPkts: 18
InOctets: 11375329
OutOctets: 25940646
InMcastOctets: 223087
OutMcastOctets: 9857
InBcastOctets: 1609992
OutBcastOctets: 852
InNoECTPkts: 35383
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
Subsystem: Dell Precision M4600 [1028:04a3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: dc000000-dd0fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d9ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Dell Precision M4600 [1028:04a3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 25
Region 0: Memory at deeb0000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
Subsystem: Dell Precision M4600 [1028:04a3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 33
Region 0: Memory at dee00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at dee80000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 8040 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Precision M4600 [1028:04a3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dee70000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)
Subsystem: Dell Precision M4600 [1028:04a3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 32
Region 0: Memory at dee60000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: ded00000-dedfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Bus: primary=00, secondary=04, subordinate=09, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: de200000-debfffff
Prefetchable memory behind bridge: 00000000db200000-00000000dbbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
Memory behind bridge: dec00000-decfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
Bus: primary=00, secondary=0b, subordinate=12, sec-latency=0
I/O behind bridge: 00002000-00005fff
Memory behind bridge: dd100000-de1fffff
Prefetchable memory behind bridge: 00000000da100000-00000000db1fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Precision M4600 [1028:04a3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: Memory at dee50000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation QM67 Express Chipset Family LPC Controller [8086:1c4f] (rev 04)
Subsystem: Dell Precision M4600 [1028:04a3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 Mobile SATA Controller [RAID mode] [8086:282a] (rev 04)
Subsystem: Dell 82801 Mobile SATA Controller [RAID mode] [1028:04a3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 31
Region 0: I/O ports at 8090 [size=8]
Region 1: I/O ports at 8080 [size=4]
Region 2: I/O ports at 8070 [size=8]
Region 3: I/O ports at 8060 [size=4]
Region 4: I/O ports at 8020 [size=32]
Region 5: Memory at dee40000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04)
Subsystem: Dell Precision M4600 [1028:04a3]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at dee30000 (64-bit, non-prefetchable) [disabled] [size=256]
Region 4: I/O ports at 8000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108GLM [Quadro 1000M] [10de:0dfa] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Dell GF108GLM [Quadro 1000M] [1028:04a3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 34
Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at d8000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at 7000 [size=128]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nouveau
01:00.1 Audio device [0403]: NVIDIA Corporation GF108 High Definition Audio Controller [10de:0bea] (rev a1)
Subsystem: Dell GF108 High Definition Audio Controller [1028:04a3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at dd080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
03:00.0 Network controller [0280]: Broadcom Limited BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)
Subsystem: Dell Inspiron M5010 / XPS 8300 [1028:0010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at ded00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: bcma-pci-bridge
Kernel modules: bcma
0a:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) (prog-if 30 [XHCI])
Subsystem: Dell Precision M4600 [1028:04a3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at dec00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
0b:00.0 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. OZ600 1394a-2000 Controller [1217:11f7] (rev 05) (prog-if 10 [OHCI])
Subsystem: Dell Precision M4600 [1028:04a3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at dd130000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci
0b:00.1 SD Host controller [0805]: O2 Micro, Inc. OZ600RJ1/OZ900RJ1 SD/MMC Card Reader Controller [1217:8320] (rev 05) (prog-if 01)
Subsystem: Dell Precision M4600 [1028:04a3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 16
Region 0: Memory at dd120000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci
0b:00.2 Mass storage controller [0180]: O2 Micro, Inc. OZ600 MS/xD Controller [1217:8330] (rev 05)
Subsystem: Dell Precision M4600 [1028:04a3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 10
Region 0: Memory at dd110000 (32-bit, non-prefetchable) [size=1K]
Region 2: Memory at dd100000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
** USB devices:
Bus 004 Device 003: ID 0a5c:5800 Broadcom Corp. BCM5880 Secure Applications Processor
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 048d:1167 Integrated Technology Express, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 1bcf:280b Sunplus Innovation Technology Inc.
Bus 003 Device 003: ID 413c:8187 Dell Computer Corp. DW375 Bluetooth Module
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: buster/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 4.16.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.16.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.130
ii kmod 25-1
ii linux-base 4.5
Versions of packages linux-image-4.16.0-1-amd64 recommends:
ii apparmor 2.12-4
ii firmware-linux-free 3.4
ii irqbalance 1.3.0-0.1+b1
Versions of packages linux-image-4.16.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02+dfsg1-4
pn linux-doc-4.16 <none>
Versions of packages linux-image-4.16.0-1-amd64 is related to:
ii firmware-amd-graphics 20170823-1
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 20170823-1
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20170823-1
ii firmware-misc-nonfree 20170823-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- debconf-show failed
Reply to: