[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#892105: linux-image-4.9.0-6-amd64: i40e driver still unstable



Package: src:linux
Version: 4.9.82-1+deb9u3
Severity: normal

Dear Maintainer,

*** Reporter, please consider answering these questions, where appropriate ***

After rebooting the system with a new Kernel we see various problems
with i40e driver. Usually the problems start to occure within one day
or so under load. The last time we got the error messages shown below,
while the NIC seemed to stop processing some(?) packages. tcpdump
suggested that the machine received packages but either failed to
forward them or to send out the responses. With older Kernels we have
seen also Panics.

Our usual solution is to install a i40e driver from Intel (version
1.6.42 works nice for us). Please note that this is the only driver
taining our kernel - as a workaround.

*** End of the template - remove these template lines ***


-- Package-specific info:
** Version:
Linux version 4.9.0-6-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.82-1+deb9u2 (2018-02-21)

** Command line:
BOOT_IMAGE=/vmlinuz-4.9.0-6-amd64 root=/dev/mapper/vg--data-root ro quiet

** Tainted: O (4096)
 * Out-of-tree module has been loaded.

** Kernel log:
2018-02-28T18:10:23.090521+01:00 fire13a1 kernel: [    2.951283] i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 1.6.16-k
2018-02-28T18:10:23.090522+01:00 fire13a1 kernel: [    2.951283] i40e: Copyright (c) 2013 - 2014 Intel Corporation.
2018-02-28T18:10:23.090544+01:00 fire13a1 kernel: [    2.967616] i40e 0000:01:00.0: fw 4.40.35115 api 1.4 nvm 4.53 0x8000206e 0.0.0
2018-02-28T18:10:23.090635+01:00 fire13a1 kernel: [    3.227930] i40e 0000:01:00.0: MAC address: 3c:fd:fe:9e:51:80
2018-02-28T18:10:23.090635+01:00 fire13a1 kernel: [    3.231934] i40e 0000:01:00.0: SAN MAC: 3c:fd:fe:9e:51:82
2018-02-28T18:10:23.090646+01:00 fire13a1 kernel: [    3.402043] i40e 0000:01:00.0: Added LAN device PF0 bus=0x00 func=0x00
2018-02-28T18:10:23.090647+01:00 fire13a1 kernel: [    3.402053] i40e 0000:01:00.0: PCI-Express: Speed 8.0GT/s Width x8
2018-02-28T18:10:23.090652+01:00 fire13a1 kernel: [    3.431852] i40e 0000:01:00.0: Features: PF-id[0] VFs: 64 VSIs: 66 QP: 4 RSS FD_ATR FD_SB NTUPLE DCB VxLAN Geneve PTP VEPA
2018-02-28T18:10:23.090654+01:00 fire13a1 kernel: [    3.443530] i40e 0000:01:00.1: fw 4.40.35115 api 1.4 nvm 4.53 0x8000206e 0.0.0
2018-02-28T18:10:23.090669+01:00 fire13a1 kernel: [    3.720312] i40e 0000:01:00.1: MAC address: 3c:fd:fe:9e:51:81
2018-02-28T18:10:23.090669+01:00 fire13a1 kernel: [    3.724518] i40e 0000:01:00.1: SAN MAC: 3c:fd:fe:9e:51:83
2018-02-28T18:10:23.090693+01:00 fire13a1 kernel: [    3.887825] i40e 0000:01:00.1: Added LAN device PF1 bus=0x00 func=0x01
2018-02-28T18:10:23.090693+01:00 fire13a1 kernel: [    3.887833] i40e 0000:01:00.1: PCI-Express: Speed 8.0GT/s Width x8
2018-02-28T18:10:23.090696+01:00 fire13a1 kernel: [    3.917891] i40e 0000:01:00.1: Features: PF-id[1] VFs: 64 VSIs: 66 QP: 4 RSS FD_ATR FD_SB NTUPLE DCB VxLAN Geneve PTP VEPA
2018-02-28T18:10:23.090697+01:00 fire13a1 kernel: [    3.918420] i40e 0000:01:00.1 eth3: renamed from eth2
2018-02-28T18:10:23.090698+01:00 fire13a1 kernel: [    3.940100] i40e 0000:01:00.0 eth2: renamed from eth1
2018-02-28T18:10:23.411181+01:00 fire13a1 kernel: [   10.794451] i40e 0000:01:00.0 eth2: already using mac address 3c:fd:fe:9e:51:80
2018-02-28T18:10:23.415575+01:00 fire13a1 kernel: [   10.797168] i40e 0000:01:00.0 eth2: NIC Link is Up 10 Gbps Full Duplex, Flow Control: None
2018-02-28T18:10:23.415583+01:00 fire13a1 kernel: [   10.799073] i40e 0000:01:00.1 eth3: set new mac address 3c:fd:fe:9e:51:80
2018-02-28T18:10:23.421269+01:00 fire13a1 kernel: [   10.803806] i40e 0000:01:00.1 eth3: NIC Link is Up 10 Gbps Full Duplex, Flow Control: None
...
2018-03-01T11:23:49.484086+01:00 fire13a1 kernel: [62013.858296] i40e 0000:01:00.0: TX driver issue detected, PF reset issued
2018-03-01T11:23:50.100101+01:00 fire13a1 kernel: [62014.475520] i40e 0000:01:00.0: Error I40E_AQ_RC_EINVAL adding RX filters on PF, promiscuous mode forced on
2018-03-01T11:23:52.020101+01:00 fire13a1 kernel: [62016.393751] i40e 0000:01:00.0: TX driver issue detected, PF reset issued
2018-03-01T11:23:53.088122+01:00 fire13a1 kernel: [62017.461657] i40e 0000:01:00.0: Error I40E_AQ_RC_EINVAL adding RX filters on PF, promiscuous mode forced on
2018-03-01T11:23:54.624095+01:00 fire13a1 kernel: [62018.999104] i40e 0000:01:00.0: TX driver issue detected, PF reset issued
2018-03-01T11:23:55.100100+01:00 fire13a1 kernel: [62019.473449] i40e 0000:01:00.0: Error I40E_AQ_RC_EINVAL adding RX filters on PF, promiscuous mode forced on


** Model information
sys_vendor: Thomas-Krenn.AG
product_name: X10SLH-F/X10SLM+-F
product_version: 0123456789
chassis_vendor: Supermicro
chassis_version: 0123456789
bios_vendor: American Megatrends Inc.
bios_version: 3.0
board_vendor: Supermicro
board_name: X10SLH-F/X10SLM+-F
board_version: 1.01 

** Loaded modules:
fuse
btrfs
ufs
qnx4
hfsplus
hfs
minix
ntfs
vfat
msdos
fat
jfs
xfs
drbg
ansi_cprng
authenc
echainiv
xfrm6_mode_tunnel
xfrm4_mode_tunnel
tun
xt_nat
cls_u32
cls_fw
sch_sfq
sch_htb
ip6table_filter
ip6_tables
xt_recent
ip_set_hash_ip
xt_comment
xt_tcpmss
iptable_nat
nf_nat_ipv4
ipt_REJECT
nf_reject_ipv4
xt_addrtype
bridge
xt_policy
xt_mark
iptable_mangle
xt_TCPMSS
xt_tcpudp
xt_CT
iptable_raw
xt_multiport
nf_conntrack_ipv4
nf_defrag_ipv4
twofish_generic
twofish_avx_x86_64
twofish_x86_64_3way
twofish_x86_64
xt_conntrack
xt_NFLOG
nfnetlink_log
twofish_common
xt_LOG
serpent_avx2
serpent_avx_x86_64
serpent_sse2_x86_64
serpent_generic
nf_log_ipv4
nf_log_common
nf_nat_tftp
blowfish_generic
blowfish_x86_64
nf_nat_snmp_basic
nf_conntrack_snmp
nf_nat_sip
nf_nat_pptp
nf_nat_proto_gre
blowfish_common
nf_nat_irc
cast5_avx_x86_64
cast5_generic
cast_common
nf_nat_h323
nf_nat_ftp
nf_nat_amanda
ts_kmp
ctr
nf_conntrack_amanda
nf_nat
nf_conntrack_sane
des_generic
nf_conntrack_tftp
cbc
nf_conntrack_sip
algif_skcipher
nf_conntrack_proto_udplite
camellia_generic
nf_conntrack_proto_sctp
camellia_aesni_avx2
nf_conntrack_pptp
nf_conntrack_proto_gre
nf_conntrack_netbios_ns
nf_conntrack_broadcast
camellia_aesni_avx_x86_64
camellia_x86_64
xts
xcbc
nf_conntrack_irc
sha512_ssse3
sha512_generic
nf_conntrack_h323
md4
algif_hash
nf_conntrack_ftp
af_alg
xfrm_user
xfrm4_tunnel
tunnel4
ipcomp
xfrm_ipcomp
esp4
xt_set
ah4
ip_set
af_key
xfrm_algo
iptable_filter
8021q
garp
mrp
stp
llc
nf_conntrack_netlink
nf_conntrack
nfnetlink
bonding
intel_rapl
x86_pkg_temp_thermal
intel_powerclamp
coretemp
kvm_intel
kvm
irqbypass
crct10dif_pclmul
crc32_pclmul
ghash_clmulni_intel
iTCO_wdt
iTCO_vendor_support
intel_cstate
evdev
intel_uncore
joydev
sg
pcspkr
intel_rapl_perf
ast
ttm
drm_kms_helper
drm
button
intel_pch_thermal
ie31200_edac
mei_me
mei
lpc_ich
mfd_core
video
shpchp
edac_core
acpi_pad
ipmi_si
ipmi_devintf
ipmi_msghandler
ip_tables
x_tables
autofs4
ext4
crc16
jbd2
fscrypto
ecb
mbcache
raid10
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
async_tx
xor
raid6_pq
libcrc32c
crc32c_generic
raid0
multipath
linear
dm_mod
raid1
md_mod
hid_generic
usbhid
hid
sd_mod
ahci
libahci
libata
scsi_mod
crc32c_intel
i40e(O)
aesni_intel
aes_x86_64
glue_helper
lrw
gf128mul
ablk_helper
cryptd
i2c_i801
i2c_smbus
xhci_pci
ehci_pci
igb
xhci_hcd
ehci_hcd
i2c_algo_bit
dca
ptp
usbcore
usb_common
pps_core
fan
thermal

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v3 Processor DRAM Controller [8086:0c08] (rev 06)
	Subsystem: Super Micro Computer Inc Xeon E3-1200 v3 Processor DRAM Controller [15d9:0803]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: ie31200_edac
	Kernel modules: ie31200_edac

00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c01] (rev 06) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 25
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: f7300000-f73fffff
	Prefetchable memory behind bridge: 00000000e0000000-00000000e1bfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 05) (prog-if 30 [XHCI])
	Subsystem: Super Micro Computer Inc 8 Series/C220 Series Chipset Family USB xHCI [15d9:0803]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 26
	Region 0: Memory at f7400000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci

00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
	Subsystem: Super Micro Computer Inc 8 Series/C220 Series Chipset Family MEI Controller [15d9:0803]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at f7417000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel modules: mei_me

00:16.1 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #2 [8086:8c3b] (rev 04)
	Subsystem: Super Micro Computer Inc 8 Series/C220 Series Chipset Family MEI Controller [15d9:0803]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 10
	Region 0: Memory at f7416000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>

00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 05) (prog-if 20 [EHCI])
	Subsystem: Super Micro Computer Inc 8 Series/C220 Series Chipset Family USB EHCI [15d9:0803]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f7414000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d5) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: f6000000-f70fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 [8086:8c14] (rev d5) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin C routed to IRQ 18
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: f7200000-f72fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 [8086:8c16] (rev d5) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin D routed to IRQ 19
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: f7100000-f71fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 05) (prog-if 20 [EHCI])
	Subsystem: Super Micro Computer Inc 8 Series/C220 Series Chipset Family USB EHCI [15d9:0803]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at f7413000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1f.0 ISA bridge [0601]: Intel Corporation C226 Series Chipset Family Server Advanced SKU LPC Controller [8086:8c56] (rev 05)
	Subsystem: Super Micro Computer Inc C226 Series Chipset Family Server Advanced SKU LPC Controller [15d9:0803]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 05) (prog-if 01 [AHCI 1.0])
	Subsystem: Super Micro Computer Inc 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [15d9:0803]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 27
	Region 0: I/O ports at f050 [size=8]
	Region 1: I/O ports at f040 [size=4]
	Region 2: I/O ports at f030 [size=8]
	Region 3: I/O ports at f020 [size=4]
	Region 4: I/O ports at f000 [size=32]
	Region 5: Memory at f7412000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 05)
	Subsystem: Super Micro Computer Inc 8 Series/C220 Series Chipset Family SMBus Controller [15d9:0803]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at f7411000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 0580 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801

00:1f.6 Signal processing controller [1180]: Intel Corporation 8 Series Chipset Family Thermal Management Controller [8086:8c24] (rev 05)
	Subsystem: Super Micro Computer Inc 8 Series Chipset Family Thermal Management Controller [15d9:0803]
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at f7410000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel modules: intel_pch_thermal

01:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ [8086:1572] (rev 01)
	Subsystem: Intel Corporation Ethernet Converged Network Adapter X710-2 [8086:0007]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at e0000000 (64-bit, prefetchable) [size=8M]
	Region 3: Memory at e1800000 (64-bit, prefetchable) [size=32K]
	Expansion ROM at f7380000 [disabled] [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: i40e
	Kernel modules: i40e

01:00.1 Ethernet controller [0200]: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ [8086:1572] (rev 01)
	Subsystem: Intel Corporation Ethernet Converged Network Adapter X710 [8086:0000]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at e0800000 (64-bit, prefetchable) [size=8M]
	Region 3: Memory at e1808000 (64-bit, prefetchable) [size=32K]
	Expansion ROM at f7300000 [disabled] [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: i40e
	Kernel modules: i40e

02:00.0 PCI bridge [0604]: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge [1a03:1150] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=02, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: f6000000-f70fffff
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel modules: shpchp

03:00.0 VGA compatible controller [0300]: ASPEED Technology, Inc. ASPEED Graphics Family [1a03:2000] (rev 30) (prog-if 00 [VGA controller])
	Subsystem: Super Micro Computer Inc ASPEED Graphics Family [15d9:0803]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at f7000000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at e000 [size=128]
	[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: ast
	Kernel modules: ast

04:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03)
	Subsystem: Super Micro Computer Inc I210 Gigabit Network Connection [15d9:1533]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at f7200000 (32-bit, non-prefetchable) [size=512K]
	Region 2: I/O ports at d000 [size=32]
	Region 3: Memory at f7280000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: igb
	Kernel modules: igb

05:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03)
	Subsystem: Super Micro Computer Inc I210 Gigabit Network Connection [15d9:1533]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at f7100000 (32-bit, non-prefetchable) [size=512K]
	Region 2: I/O ports at c000 [size=32]
	Region 3: Memory at f7180000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: igb
	Kernel modules: igb


** USB devices:
Bus 002 Device 002: ID 8087:8000 Intel Corp. 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 0557:2419 ATEN International Co., Ltd 
Bus 003 Device 002: ID 0557:7000 ATEN International Co., Ltd Hub
Bus 003 Device 003: ID 10d5:55d2 Uni Class Technology Co., Ltd 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 9.3
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 4.9.0-6-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.9.0-6-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.130
ii  kmod                                    23-2
ii  linux-base                              4.5

Versions of packages linux-image-4.9.0-6-amd64 recommends:
pn  firmware-linux-free  <none>
pn  irqbalance           <none>

Versions of packages linux-image-4.9.0-6-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.02~beta3-5
pn  linux-doc-4.9           <none>

Versions of packages linux-image-4.9.0-6-amd64 is related to:
pn  firmware-amd-graphics     <none>
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
pn  firmware-misc-nonfree     <none>
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information


Reply to: