[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#891787: linux-image-4.15.0-1-arm64: Socionext SynQuacer support not enabled



On 28 February 2018 at 20:43, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote:
> Package: src:linux
> Version: 4.15.4-1
> Severity: normal
>
> Dear Maintainer,
>
> Support for Socionext SynQuacer based platforms (a 24 core arm64 SoC) has landed in v4.15 mainline.
>
> Please enable this support in the Debian kernel as well:
> CONFIG_ARCH_SYNQUACER=y
> CONFIG_SNI_NETSEC=m
> CONFIG_MMC_SDHCI_F_SDH30=m
> CONFIG_GPIO_MB86S7X=m
>

Actually, NETSEC support did not make it into v4.15 after all but was
pulled into v4.16 instead.

The SoC has PCIe support, so it can be used with PCIe NICs instead,
and so it would still be useful to enable the other pieces.

Thanks,
Ard.

>
> -- Package-specific info:
> ** Version:
> Linux version 4.15.0-1-arm64 (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-3)) #1 SMP Debian 4.15.4-1 (2018-02-18)
>
> ** Command line:
> BOOT_IMAGE=/boot/vmlinuz-4.15.0-1-arm64 root=UUID=4e4cd64e-fe66-44c6-ae59-4c8f8fada27d ro earlycon
>
> ** Tainted: O (4096)
>  * Out-of-tree module has been loaded.
>
> ** Kernel log:
> [    2.572430] pci 0001:00:00.0: BAR 0: assigned [mem 0x3f00000000-0x3f00003fff 64bit]
> [    2.580576] vgaarb: loaded
> [    2.583622] EDAC MC: Ver: 3.0.0
> [    2.587045] dmi: Firmware registration failed.
> [    2.591498] Registered efivars operations
> [    2.597581] clocksource: Switched to clocksource arch_sys_counter
> [    2.647787] VFS: Disk quotas dquot_6.6.0
> [    2.651808] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [    2.659117] AppArmor: AppArmor Filesystem Enabled
> [    2.663943] pnp: PnP ACPI init
> [    2.710945] system 00:00: [mem 0x70000000-0x77efffff] could not be reserved
> [    2.717930] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    2.717941] pnp: PnP ACPI: found 1 devices
> [    2.728872] NET: Registered protocol family 2
> [    2.733841] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
> [    2.741430] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
> [    2.748510] TCP: Hash tables configured (established 32768 bind 32768)
> [    2.755274] UDP hash table entries: 2048 (order: 4, 65536 bytes)
> [    2.761390] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
> [    2.768200] NET: Registered protocol family 1
> [    2.772594] PCI: CLS 0 bytes, default 128
> [    2.772776] Unpacking initramfs...
> [    3.775379] Freeing initrd memory: 18460K
> [    3.781356] hw perfevents: enabled with armv8_pmuv3_0 PMU driver, 7 counters available
> [    3.789398] kvm [1]: 8-bit VMID
> [    3.792543] kvm [1]: IDMAP page: 808b2000
> [    3.796551] kvm [1]: HYP VA range: 800000000000:ffffffffffff
> [    3.803083] kvm [1]: vgic-v2@2c020000
> [    3.806800] kvm [1]: GIC system register CPU interface enabled
> [    3.813166] kvm [1]: vgic interrupt IRQ1
> [    3.817109] kvm [1]: virtual timer IRQ3
> [    3.821557] kvm [1]: Hyp mode initialized successfully
> [    3.830044] Initialise system trusted keyrings
> [    3.834634] workingset: timestamp_bits=44 max_order=20 bucket_order=0
> [    3.845934] zbud: loaded
> [    5.139407] Key type asymmetric registered
> [    5.143515] Asymmetric key parser 'x509' registered
> [    5.148554] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
> [    5.156157] io scheduler noop registered
> [    5.160090] io scheduler deadline registered
> [    5.164583] io scheduler cfq registered (default)
> [    5.169289] io scheduler mq-deadline registered
> [    5.177066] ACPI GTDT: found 1 SBSA generic Watchdog(s).
> [    5.183192] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [    5.190393] Serial: AMBA driver
> [    5.193625] msm_serial: driver initialized
> [    5.198236] cacheinfo: Unable to detect cache hierarchy for CPU 0
> [    5.204767] mousedev: PS/2 mouse device common for all mice
> [    5.211741] ledtrig-cpu: registered to indicate activity on CPUs
> [    5.217772] dmi-sysfs: dmi entry is absent.
> [    5.222849] NET: Registered protocol family 10
> [    5.240755] Segment Routing with IPv6
> [    5.244479] mip6: Mobile IPv6
> [    5.247452] NET: Registered protocol family 17
> [    5.251904] mpls_gso: MPLS GSO support
> [    5.256247] registered taskstats version 1
> [    5.260351] Loading compiled-in X.509 certificates
> [    5.426174] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
> [    5.433813] zswap: loaded using pool lzo/zbud
> [    5.438349] AppArmor: AppArmor sha1 policy hashing enabled
> [    5.443843] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
> [    5.450360] hctosys: unable to open rtc device (rtc0)
> [    5.466502] Freeing unused kernel memory: 4544K
> [    5.608443] nvme nvme0: pci function 0001:00:00.0
> [    5.871879] blk_queue_max_hw_sectors: set to minimum 8
> [    5.890416] blk_queue_max_hw_sectors: set to minimum 8
> [    5.905751]  nvme0n1: p1 p2 p3 p4
> [    6.706212] PM: Starting manual resume from disk
> [    6.711061] PM: Image not found (code -22)
> [    6.842702] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
> [    7.020882] systemd[1]: System time before build time, advancing clock.
> [    7.045997] ip_tables: (C) 2000-2006 Netfilter Core Team
> [    7.071928] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
> [    7.090621] systemd[1]: Detected architecture arm64.
> [    7.109901] systemd[1]: Set hostname to <pec106>.
> [    7.238380] systemd[1]: Listening on fsck to fsckd communication Socket.
> [    7.261962] systemd[1]: Listening on Journal Audit Socket.
> [    7.282276] systemd[1]: Created slice System Slice.
> [    7.298193] systemd[1]: Created slice system-systemd\x2dfsck.slice.
> [    7.319827] systemd[1]: Mounting POSIX Message Queue File System...
> [    7.338298] systemd[1]: Created slice system-getty.slice.
> [    7.357876] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
> [    7.670924] EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
> [    7.987435] systemd-journald[345]: Received request to flush runtime journal from PID 1
> [    8.038624] EFI Variables Facility v0.08 2004-May-17
> [    8.038765] sbsa-gwdt sbsa-gwdt.0: Initialized with 10s timeout @ 100000000 Hz, action=0.
> [    8.042843] libphy: Fixed MDIO Bus: probed
> [    8.049997] netsec: loading out-of-tree module taints kernel.
> [    8.060587] netsec SCX0001:00: hardware revision 5.65
> [    8.060812] libphy: SNI NETSEC MDIO: probed
> [    8.083648] pstore: using zlib compression
> [    8.088149] pstore: Registered efi as persistent store backend
> [    8.209798] Adding 3940348k swap on /dev/nvme0n1p3.  Priority:-2 extents:1 across:3940348k SSFS
> [    8.260972] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
> [   10.491250] EXT4-fs (nvme0n1p4): mounted filesystem with ordered data mode. Opts: (null)
> [   10.686809] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> [   11.689695] netsec SCX0001:00 eth0: Link is Down
> [   14.761737] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [   14.768281] netsec SCX0001:00 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
> [   22.550937] random: crng init done
>
> ** Model information
>
> ** Loaded modules:
> nls_ascii
> nls_cp437
> vfat
> fat
> aes_ce_blk
> crypto_simd
> cryptd
> aes_ce_cipher
> ghash_ce
> efi_pstore
> gf128mul
> broadcom
> bcm_phy_lib
> sha2_ce
> sha256_arm64
> netsec
> sha1_ce
> of_mdio
> fixed_phy
> libphy
> efivars
> sbsa_gwdt
> efivarfs
> ip_tables
> x_tables
> autofs4
> ext4
> crc16
> mbcache
> jbd2
> crc32c_generic
> fscrypto
> ecb
> aes_arm64
> nvme
> nvme_core
>
> ** PCI devices:
> 0001:00:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd Device [144d:a804] (prog-if 02 [NVM Express])
>         Subsystem: Samsung Electronics Co Ltd Device [144d:a801]
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Interrupt: pin A routed to IRQ 11
>         NUMA node: 0
>         Region 0: Memory at 3f00000000 (64-bit, non-prefetchable) [size=16K]
>         Capabilities: <access denied>
>         Kernel driver in use: nvme
>         Kernel modules: nvme
>
>
> ** USB devices:
> not available
>
>
> -- System Information:
> Debian Release: 9.3
>   APT prefers stable-updates
>   APT policy: (500, 'stable-updates'), (500, 'testing'), (500, 'stable')
> Architecture: arm64 (aarch64)
>
> Kernel: Linux 4.15.0-1-arm64 (SMP w/24 CPU cores)
> Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8)
> Shell: /bin/sh linked to /bin/dash
> Init: systemd (via /run/systemd/system)
>
> Versions of packages linux-image-4.15.0-1-arm64 depends on:
> ii  initramfs-tools [linux-initramfs-tool]  0.130
> ii  kmod                                    23-2
> ii  linux-base                              4.5
>
> Versions of packages linux-image-4.15.0-1-arm64 recommends:
> pn  apparmor             <none>
> ii  firmware-linux-free  3.4
> ii  irqbalance           1.1.0-2.3
>
> Versions of packages linux-image-4.15.0-1-arm64 suggests:
> pn  debian-kernel-handbook  <none>
> pn  linux-doc-4.15          <none>
>
> Versions of packages linux-image-4.15.0-1-arm64 is related to:
> pn  firmware-amd-graphics     <none>
> pn  firmware-atheros          <none>
> pn  firmware-bnx2             <none>
> pn  firmware-bnx2x            <none>
> pn  firmware-brcm80211        <none>
> pn  firmware-cavium           <none>
> pn  firmware-intel-sound      <none>
> pn  firmware-intelwimax       <none>
> pn  firmware-ipw2x00          <none>
> pn  firmware-ivtv             <none>
> pn  firmware-iwlwifi          <none>
> pn  firmware-libertas         <none>
> pn  firmware-linux-nonfree    <none>
> pn  firmware-misc-nonfree     <none>
> pn  firmware-myricom          <none>
> pn  firmware-netxen           <none>
> pn  firmware-qlogic           <none>
> ii  firmware-realtek          20161130-3
> pn  firmware-samsung          <none>
> pn  firmware-siano            <none>
> pn  firmware-ti-connectivity  <none>
> pn  xen-hypervisor            <none>
>
> -- no debconf information


Reply to: