Bug#891565: kernel upgrade related to causing link failure at eth0 and wlp2s0
Package: linux-image-4.15.0-1-amd64
Version: 4.15.4-1
i am unable to connect to network because of link problem for
my wired and wireless connection related.
Things work fine with linux-image-4.9.0-4-amd64 package
i use libc6:amd64 2.26-6 amd64 GNU C Library: Shared libraries
i useuster/sid
a portion of dmesg output is show below. typical full dmesg output is attached
[ 500.056159] ------------[ cut here ]------------
[ 500.056162] rtl8723be: error H2C cmd because of Fw download fail!!!
[ 500.056198] WARNING: CPU: 0 PID: 22 at /build/linux-PFKtCE/linux-4.15.4/drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c:227 rtl8723be_fill_h2c_cmd+0x103/0x440 [rtl8723be]
$
--
software engineer
rajagiri school of engineering and technology
[ 0.000000] Linux version 4.15.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-3)) #1 SMP Debian 4.15.4-1 (2018-02-18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-1-amd64 root=UUID=a054425d-89dc-4d7a-a928-e5a87f57dc8d ro quiet
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000075a76fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000075a77000-0x0000000075e76fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000075e77000-0x0000000076f76fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000076f77000-0x0000000076fb6fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000076fb7000-0x0000000077ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007bc00000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: HP HP Notebook/80C5, BIOS F.1E 12/25/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 0FFA00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 000000000 mask F80000000 write-back
[ 0.000000] 3 base 07C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 07BC00000 mask FFFC00000 uncachable
[ 0.000000] 5 base 100000000 mask F80000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0x78000 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ (ptrval)] 98000 size 24576
[ 0.000000] BRK [0x14e01d000, 0x14e01dfff] PGTABLE
[ 0.000000] BRK [0x14e01e000, 0x14e01efff] PGTABLE
[ 0.000000] BRK [0x14e01f000, 0x14e01ffff] PGTABLE
[ 0.000000] BRK [0x14e020000, 0x14e020fff] PGTABLE
[ 0.000000] BRK [0x14e021000, 0x14e021fff] PGTABLE
[ 0.000000] BRK [0x14e022000, 0x14e022fff] PGTABLE
[ 0.000000] BRK [0x14e023000, 0x14e023fff] PGTABLE
[ 0.000000] BRK [0x14e024000, 0x14e024fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3537b000-0x369b4fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x0000000076FB6120 0000A4 (v01 HPQOEM SLIC-MPC 00000003 HP 01000013)
[ 0.000000] ACPI: FACP 0x0000000076FAA000 00010C (v05 HPQOEM SLIC-MPC 00000003 HP 00040000)
[ 0.000000] ACPI: DSDT 0x0000000076F9C000 00A70D (v02 HPQOEM SLIC-MPC 00000003 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x0000000076F72000 000040
[ 0.000000] ACPI: TCPA 0x0000000076FB5000 000032 (v02 HPQOEM INSYDE 00000000 HP 00040000)
[ 0.000000] ACPI: UEFI 0x0000000076FB4000 000236 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: MSDM 0x0000000076FB3000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: UEFI 0x0000000076FB2000 000042 (v01 HPQOEM INSYDE 00000000 HP 00040000)
[ 0.000000] ACPI: SSDT 0x0000000076FAB000 0066C3 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x0000000076FA8000 00003C (v01 HPQOEM INSYDE 00000003 HP 00040000)
[ 0.000000] ACPI: SSDT 0x0000000076FA7000 0005F4 (v01 HPQOEM CpuDptf 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000076F9B000 0009F8 (v01 HPQOEM DptfTab 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000076F9A000 000763 (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000076F99000 000290 (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000076F98000 00017A (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x0000000076FA9000 000084 (v03 HPQOEM SLIC-MPC 00000003 HP 00040000)
[ 0.000000] ACPI: SSDT 0x0000000076F97000 000432 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.000000] ACPI: TPM2 0x0000000076F96000 000034 (v03 HPQOEM INSYDE 00000000 HP 00040000)
[ 0.000000] ACPI: FPDT 0x0000000076F95000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x17fffa000-0x17fffefff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000017fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x0000000075a76fff]
[ 0.000000] node 0: [mem 0x0000000076fb7000-0x0000000077ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000017fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[ 0.000000] On node 0 totalpages: 1009757
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7523 pages used for memmap
[ 0.000000] DMA32 zone: 481472 pages, LIFO batch:31
[ 0.000000] Normal zone: 8192 pages used for memmap
[ 0.000000] Normal zone: 524288 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 99 pages
[ 0.000000] Reserving Intel graphics memory at 0x000000007c800000-0x000000007e7fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x75a77000-0x75e76fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x75e77000-0x76f76fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x76f77000-0x76fb6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78000000-0x7bbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7bc00000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfe9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfed02fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed03000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed09fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed0a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1d000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfedbffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedc0000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 44 pages/cpu @ (ptrval) s141976 r8192 d30056 u524288
[ 0.000000] pcpu-alloc: s141976 r8192 d30056 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 993957
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-1-amd64 root=UUID=a054425d-89dc-4d7a-a928-e5a87f57dc8d ro quiet
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3863252K/4039028K available (10252K kernel code, 1165K rwdata, 3084K rodata, 1508K init, 692K bss, 175776K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 29506 entries in 116 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 33024, nr_irqs: 1024, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.004000] APIC: Switch to symmetric I/O mode setup
[ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.024000] tsc: Detected 1600.000 MHz processor
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=6400000)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Security Framework initialized
[ 0.024000] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.024000] AppArmor: AppArmor initialized
[ 0.024000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.024000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.024000] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.024000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.024000] CPU: Physical Processor ID: 0
[ 0.024000] CPU: Processor Core ID: 0
[ 0.024000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.024000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.024000] mce: CPU supports 6 MCE banks
[ 0.024000] CPU0: Thermal monitoring enabled (TM1)
[ 0.024000] process: using mwait in idle threads
[ 0.024000] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.024000] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[ 0.024000] Spectre V2 : Mitigation: Full generic retpoline
[ 0.028066] Freeing SMP alternatives memory: 28K
[ 0.032232] TSC deadline timer enabled
[ 0.032238] smpboot: CPU0: Intel(R) Celeron(R) CPU N3050 @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x3)
[ 0.032456] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[ 0.032480] ... version: 3
[ 0.032482] ... bit width: 40
[ 0.032483] ... generic registers: 2
[ 0.032485] ... value mask: 000000ffffffffff
[ 0.032486] ... max period: 0000007fffffffff
[ 0.032487] ... fixed-purpose events: 3
[ 0.032489] ... event mask: 0000000700000003
[ 0.032579] Hierarchical SRCU implementation.
[ 0.034061] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.034124] smp: Bringing up secondary CPUs ...
[ 0.034432] x86: Booting SMP configuration:
[ 0.034435] .... node #0, CPUs: #1
[ 0.034686] smp: Brought up 1 node, 2 CPUs
[ 0.034686] smpboot: Max logical packages: 2
[ 0.034686] smpboot: Total of 2 processors activated (6400.00 BogoMIPS)
[ 0.036338] devtmpfs: initialized
[ 0.036338] x86/mm: Memory block size: 128MB
[ 0.037183] PM: Registering ACPI NVS region [mem 0x75e77000-0x76f76fff] (17825792 bytes)
[ 0.037183] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.037183] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.037183] pinctrl core: initialized pinctrl subsystem
[ 0.037324] NET: Registered protocol family 16
[ 0.037495] audit: initializing netlink subsys (disabled)
[ 0.037560] audit: type=2000 audit(1519660210.036:1): state=initialized audit_enabled=0 res=1
[ 0.037560] cpuidle: using governor ladder
[ 0.037560] cpuidle: using governor menu
[ 0.037560] ACPI: bus type PCI registered
[ 0.037560] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.037560] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.037560] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.037560] PCI: Using configuration type 1 for base access
[ 0.041737] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.041737] ACPI: Added _OSI(Module Device)
[ 0.041737] ACPI: Added _OSI(Processor Device)
[ 0.041737] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.041737] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.055768] ACPI: Dynamic OEM Table Load:
[ 0.055786] ACPI: SSDT 0xFFFF8831FA99E800 000634 (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
[ 0.056319] ACPI: Dynamic OEM Table Load:
[ 0.056331] ACPI: SSDT 0xFFFF8831FA9FFC00 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
[ 0.057293] ACPI: Dynamic OEM Table Load:
[ 0.057304] ACPI: SSDT 0xFFFF8831FAA5CA00 00015F (v01 PmRef ApIst 00003000 INTL 20130117)
[ 0.057764] ACPI: Dynamic OEM Table Load:
[ 0.057775] ACPI: SSDT 0xFFFF8831FAA3DB40 00008D (v01 PmRef ApCst 00003000 INTL 20130117)
[ 0.058768] ACPI: EC: EC started
[ 0.058770] ACPI: EC: interrupt blocked
[ 0.059666] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.059671] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.059674] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.059675] ACPI: Interpreter enabled
[ 0.059726] ACPI: (supports S0 S3 S4 S5)
[ 0.059729] ACPI: Using IOAPIC for interrupt routing
[ 0.059801] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.060503] ACPI: Enabled 8 GPEs in block 00 to 3F
[ 0.076762] ACPI: Power Resource [USBC] (on)
[ 0.083173] ACPI: Power Resource [CLK0] (on)
[ 0.083269] ACPI: Power Resource [CLK1] (on)
[ 0.087763] ACPI: Power Resource [ID3C] (off)
[ 0.094441] ACPI: Power Resource [FN00] (off)
[ 0.095564] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.095576] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.095668] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.095695] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.096382] PCI host bridge to bus 0000:00
[ 0.096388] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.096391] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.096395] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.096398] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.096401] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.096404] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.096407] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 0.096410] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[ 0.096414] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.096429] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[ 0.096697] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[ 0.096724] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[ 0.096738] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.096748] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.096972] pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000
[ 0.096999] pci 0000:00:0b.0: reg 0x10: [mem 0x91514000-0x91514fff 64bit]
[ 0.097236] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
[ 0.097303] pci 0000:00:13.0: reg 0x20: [io 0x3060-0x307f]
[ 0.097316] pci 0000:00:13.0: reg 0x24: [mem 0x91515000-0x915157ff]
[ 0.097382] pci 0000:00:13.0: PME# supported from D3hot
[ 0.097606] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[ 0.097644] pci 0000:00:14.0: reg 0x10: [mem 0x91500000-0x9150ffff 64bit]
[ 0.097745] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.097954] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[ 0.097983] pci 0000:00:1a.0: reg 0x10: [mem 0x91400000-0x914fffff]
[ 0.097996] pci 0000:00:1a.0: reg 0x14: [mem 0x91300000-0x913fffff]
[ 0.098088] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.098269] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[ 0.098306] pci 0000:00:1b.0: reg 0x10: [mem 0x91510000-0x91513fff 64bit]
[ 0.098411] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.098585] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[ 0.098702] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.098891] pci 0000:00:1c.2: [8086:22cc] type 01 class 0x060400
[ 0.099010] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.099196] pci 0000:00:1c.3: [8086:22ce] type 01 class 0x060400
[ 0.099315] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.099513] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[ 0.099807] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[ 0.099878] pci 0000:00:1f.3: reg 0x10: [mem 0x91516000-0x9151601f]
[ 0.099995] pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f]
[ 0.100408] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.100595] pci 0000:02:00.0: [10ec:b723] type 00 class 0x028000
[ 0.100703] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.100801] pci 0000:02:00.0: reg 0x18: [mem 0x91200000-0x91203fff 64bit]
[ 0.101097] pci 0000:02:00.0: supports D1 D2
[ 0.101100] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.112102] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.112109] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.112115] pci 0000:00:1c.2: bridge window [mem 0x91200000-0x912fffff]
[ 0.112245] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[ 0.112290] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.112330] pci 0000:03:00.0: reg 0x18: [mem 0x91100000-0x91100fff 64bit]
[ 0.112355] pci 0000:03:00.0: reg 0x20: [mem 0x91000000-0x91003fff 64bit pref]
[ 0.112493] pci 0000:03:00.0: supports D1 D2
[ 0.112496] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.124036] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.124043] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
[ 0.124049] pci 0000:00:1c.3: bridge window [mem 0x91100000-0x911fffff]
[ 0.124057] pci 0000:00:1c.3: bridge window [mem 0x91000000-0x910fffff 64bit pref]
[ 0.132586] acpi 80862288:00: Device [PWM1] is in always present list
[ 0.134110] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.134266] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.134413] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.134558] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.134702] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.134846] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.134990] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.135133] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.135232] acpi INT0002:00: Device [GPED] is in always present list
[ 0.136248] ACPI: EC: interrupt unblocked
[ 0.136273] ACPI: EC: event unblocked
[ 0.136286] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.136289] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.136475] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.136475] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.136475] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.136475] vgaarb: loaded
[ 0.136475] EDAC MC: Ver: 3.0.0
[ 0.136475] PCI: Using ACPI for IRQ routing
[ 0.138661] PCI: pci_cache_line_size set to 64 bytes
[ 0.138831] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.138834] e820: reserve RAM buffer [mem 0x75a77000-0x77ffffff]
[ 0.140153] clocksource: Switched to clocksource refined-jiffies
[ 0.163389] VFS: Disk quotas dquot_6.6.0
[ 0.163433] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.163670] AppArmor: AppArmor Filesystem Enabled
[ 0.163722] pnp: PnP ACPI init
[ 0.163933] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.163944] system 00:00: [io 0x0400-0x047f] has been reserved
[ 0.163947] system 00:00: [io 0x0500-0x05fe] has been reserved
[ 0.163960] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.164148] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.164229] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.164300] pnp 00:03: Plug and Play ACPI device, IDs SYN1efb PNP0f13 (active)
[ 0.174246] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.174437] system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.174442] system 00:05: [mem 0xfea00000-0xfeafffff] has been reserved
[ 0.174446] system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.174449] system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved
[ 0.174452] system 00:05: [mem 0xfed06000-0xfed06fff] has been reserved
[ 0.174456] system 00:05: [mem 0xfed08000-0xfed09fff] has been reserved
[ 0.174459] system 00:05: [mem 0xfed80000-0xfedbffff] has been reserved
[ 0.174463] system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 0.174466] system 00:05: [mem 0xfedf0000-0xfedf0fff] has been reserved
[ 0.174470] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.174480] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.174802] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.175164] pnp: PnP ACPI: found 7 devices
[ 0.185301] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.185339] clocksource: Switched to clocksource acpi_pm
[ 0.185371] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.185377] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.185382] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.185419] pci 0000:00:1c.0: BAR 14: assigned [mem 0x91600000-0x917fffff]
[ 0.185430] pci 0000:00:1c.0: BAR 15: assigned [mem 0x91800000-0x919fffff 64bit pref]
[ 0.185437] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.185443] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.185448] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.185455] pci 0000:00:1c.0: bridge window [mem 0x91600000-0x917fffff]
[ 0.185462] pci 0000:00:1c.0: bridge window [mem 0x91800000-0x919fffff 64bit pref]
[ 0.185471] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.185475] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.185482] pci 0000:00:1c.2: bridge window [mem 0x91200000-0x912fffff]
[ 0.185495] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.185499] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
[ 0.185506] pci 0000:00:1c.3: bridge window [mem 0x91100000-0x911fffff]
[ 0.185512] pci 0000:00:1c.3: bridge window [mem 0x91000000-0x910fffff 64bit pref]
[ 0.185521] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 0.185525] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 0.185528] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 0.185530] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.185534] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.185537] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.185540] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 0.185543] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
[ 0.185546] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.185549] pci_bus 0000:01: resource 1 [mem 0x91600000-0x917fffff]
[ 0.185552] pci_bus 0000:01: resource 2 [mem 0x91800000-0x919fffff 64bit pref]
[ 0.185555] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.185558] pci_bus 0000:02: resource 1 [mem 0x91200000-0x912fffff]
[ 0.185561] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.185564] pci_bus 0000:03: resource 1 [mem 0x91100000-0x911fffff]
[ 0.185567] pci_bus 0000:03: resource 2 [mem 0x91000000-0x910fffff 64bit pref]
[ 0.185813] NET: Registered protocol family 2
[ 0.186143] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.186305] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.186495] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.186610] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.186656] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.186816] NET: Registered protocol family 1
[ 0.186855] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.189410] PCI: CLS 64 bytes, default 64
[ 0.189533] Unpacking initramfs...
[ 0.978609] Freeing initrd memory: 22760K
[ 0.978760] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.978778] software IO TLB [mem 0x71a77000-0x75a77000] (64MB) mapped at [0000000012a5d536-00000000c1731ed3]
[ 0.978918] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[ 0.978966] clocksource: Switched to clocksource tsc
[ 0.982105] Initialise system trusted keyrings
[ 0.982349] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.989506] zbud: loaded
[ 1.916501] Key type asymmetric registered
[ 1.916508] Asymmetric key parser 'x509' registered
[ 1.916701] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.916866] io scheduler noop registered
[ 1.916873] io scheduler deadline registered
[ 1.917161] io scheduler cfq registered (default)
[ 1.917169] io scheduler mq-deadline registered
[ 1.919074] intel_idle: MWAIT substates: 0x33000020
[ 1.919082] intel_idle: v0.4.1 model 0x4C
[ 1.919393] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.927767] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.948499] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.950293] Linux agpgart interface v0.103
[ 1.950823] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.950830] AMD IOMMUv2 functionality not available on this system
[ 1.952126] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.973886] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.973918] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.974633] mousedev: PS/2 mouse device common for all mice
[ 1.974893] rtc_cmos 00:06: RTC can wake from S4
[ 1.975282] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.975356] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram
[ 1.975409] intel_pstate: Intel P-state driver initializing
[ 1.975979] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.979519] NET: Registered protocol family 10
[ 1.986208] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.002326] Segment Routing with IPv6
[ 2.002414] mip6: Mobile IPv6
[ 2.002425] NET: Registered protocol family 17
[ 2.002440] mpls_gso: MPLS GSO support
[ 2.003192] microcode: sig=0x406c3, pf=0x1, revision=0x353
[ 2.003386] microcode: Microcode Update Driver: v2.2.
[ 2.003424] sched_clock: Marking stable (2002818846, 0)->(1981728263, 21090583)
[ 2.004446] registered taskstats version 1
[ 2.004450] Loading compiled-in X.509 certificates
[ 2.105923] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[ 2.106057] zswap: loaded using pool lzo/zbud
[ 2.106556] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.106571] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 2.108471] rtc_cmos 00:06: setting system clock to 2018-02-26 15:50:12 UTC (1519660212)
[ 2.125691] Freeing unused kernel memory: 1508K
[ 2.125696] Write protecting the kernel read-only data: 16384k
[ 2.127565] Freeing unused kernel memory: 2012K
[ 2.132532] Freeing unused kernel memory: 1012K
[ 2.142198] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.142199] x86/mm: Checking user space page tables
[ 2.151712] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.383267] SCSI subsystem initialized
[ 2.389252] libata version 3.00 loaded.
[ 2.391515] ahci 0000:00:13.0: version 3.0
[ 2.393404] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 2.393427] ACPI: bus type USB registered
[ 2.393477] usbcore: registered new interface driver usbfs
[ 2.393499] usbcore: registered new interface driver hub
[ 2.393549] usbcore: registered new device driver usb
[ 2.393606] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.393608] ACPI: Thermal Zone [TZ01] (27 C)
[ 2.393789] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.393791] ACPI: Thermal Zone [TZ02] (28 C)
[ 2.398047] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.398069] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.398754] r8169 0000:03:00.0 eth0: RTL8106e at 0x00000000fd925965, 70:5a:0f:b9:d8:5c, XID 04900000 IRQ 116
[ 2.402151] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 2.402157] ahci 0000:00:13.0: flags: 64bit ncq led clo only pio slum part deso sadm apst
[ 2.404092] scsi host0: ahci
[ 2.411525] scsi host1: ahci
[ 2.411646] ata1: SATA max UDMA/133 abar m2048@0x91515000 port 0x91515100 irq 115
[ 2.411650] ata2: SATA max UDMA/133 abar m2048@0x91515000 port 0x91515180 irq 115
[ 2.412140] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.412151] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.413318] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01509810
[ 2.413326] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.413643] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.413646] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.413648] usb usb1: Product: xHCI Host Controller
[ 2.413650] usb usb1: Manufacturer: Linux 4.15.0-1-amd64 xhci-hcd
[ 2.413652] usb usb1: SerialNumber: 0000:00:14.0
[ 2.413892] hub 1-0:1.0: USB hub found
[ 2.413921] hub 1-0:1.0: 7 ports detected
[ 2.414730] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.414741] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.414819] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.414822] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.414824] usb usb2: Product: xHCI Host Controller
[ 2.414826] usb usb2: Manufacturer: Linux 4.15.0-1-amd64 xhci-hcd
[ 2.414828] usb usb2: SerialNumber: 0000:00:14.0
[ 2.415049] hub 2-0:1.0: USB hub found
[ 2.415072] hub 2-0:1.0: 6 ports detected
[ 2.416589] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 2.418654] SSE version of gcm_enc/dec engaged.
[ 2.727364] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.731514] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.740824] ata2.00: ATAPI: hp DVDRW DU8A6SH, DH61, max UDMA/133
[ 2.746388] ata1.00: ATA-8: ST500LT012-1DG142, 1003YAM1, max UDMA/133
[ 2.746403] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.748338] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[ 2.752664] ata2.00: configured for UDMA/133
[ 2.785824] ata1.00: configured for UDMA/133
[ 2.786606] scsi 0:0:0:0: Direct-Access ATA ST500LT012-1DG14 YAM1 PQ: 0 ANSI: 5
[ 2.796582] scsi 1:0:0:0: CD-ROM hp DVDRW DU8A6SH DH61 PQ: 0 ANSI: 5
[ 2.846130] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 2.846134] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.846160] sd 0:0:0:0: [sda] Write Protect is off
[ 2.846163] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.846206] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.877661] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.877665] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.877960] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.897605] usb 1-5: New USB device found, idVendor=1a40, idProduct=0101
[ 2.897611] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.897614] usb 1-5: Product: USB 2.0 Hub
[ 2.898527] hub 1-5:1.0: USB hub found
[ 2.899478] hub 1-5:1.0: 4 ports detected
[ 2.940933] sda: sda1 sda2 < sda5 >
[ 2.941850] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.143472] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846]
[ 3.173676] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..]
[ 3.173687] psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.
[ 3.208069] usb 1-5.3: new full-speed USB device number 3 using xhci_hcd
[ 3.234939] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3127, fw id: 8526786
[ 3.276498] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 3.336594] usb 1-5.3: New USB device found, idVendor=0bda, idProduct=b006
[ 3.336598] usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.336600] usb 1-5.3: Product: Bluetooth Radio
[ 3.336602] usb 1-5.3: Manufacturer: Realtek
[ 3.336604] usb 1-5.3: SerialNumber: 00e04c000001
[ 3.397810] PM: Starting manual resume from disk
[ 3.398113] PM: Image not found (code -22)
[ 3.746558] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.424780] random: crng init done
[ 5.879028] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.037420] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 6.056912] systemd[1]: Detected architecture x86-64.
[ 6.080591] systemd[1]: Set hostname to <debian>.
[ 8.325913] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 8.326127] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 8.326234] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 8.326276] systemd[1]: Reached target Local Encrypted Volumes.
[ 8.326304] systemd[1]: Reached target User and Group Name Lookups.
[ 8.326746] systemd[1]: Created slice User and Session Slice.
[ 8.327092] systemd[1]: Created slice System Slice.
[ 9.134872] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 9.244190] lp: driver loaded but no devices found
[ 9.441892] RPC: Registered named UNIX socket transport module.
[ 9.441895] RPC: Registered udp transport module.
[ 9.441896] RPC: Registered tcp transport module.
[ 9.441897] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.654917] ppdev: user-space parallel port driver
[ 9.688980] systemd-journald[256]: Received request to flush runtime journal from PID 1
[ 9.895130] loop: module loaded
[ 12.856709] audit: type=1400 audit(1519660223.244:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=337 comm="apparmor_parser"
[ 12.856719] audit: type=1400 audit(1519660223.244:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=337 comm="apparmor_parser"
[ 12.856725] audit: type=1400 audit(1519660223.244:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=337 comm="apparmor_parser"
[ 13.066471] audit: type=1400 audit(1519660223.452:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=338 comm="apparmor_parser"
[ 13.097284] audit: type=1400 audit(1519660223.484:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=336 comm="apparmor_parser"
[ 13.097291] audit: type=1400 audit(1519660223.484:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=336 comm="apparmor_parser"
[ 13.097295] audit: type=1400 audit(1519660223.484:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=336 comm="apparmor_parser"
[ 13.097300] audit: type=1400 audit(1519660223.484:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=336 comm="apparmor_parser"
[ 13.097303] audit: type=1400 audit(1519660223.484:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=336 comm="apparmor_parser"
[ 13.097306] audit: type=1400 audit(1519660223.484:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=336 comm="apparmor_parser"
[ 13.878558] input: HP Wireless hotkeys as /devices/virtual/input/input3
[ 13.905143] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 13.905228] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 13.932881] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input4
[ 13.932900] ACPI: Lid Switch [LID0]
[ 13.933034] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 13.933064] ACPI: Power Button [PWRF]
[ 14.015059] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.239793] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 14.239875] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 14.297402] ACPI: AC Adapter [ACAD] (off-line)
[ 14.319187] wmi_bus wmi_bus-PNP0C14:00: WQBJ data block query control method not found
[ 14.616221] ACPI: Battery Slot [BAT1] (battery present)
[ 14.742577] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 15.499320] iTCO_vendor_support: vendor-support=0
[ 15.500333] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 15.500440] iTCO_wdt: Found a Braswell SoC TCO device (Version=3, TCOBASE=0x0460)
[ 15.500601] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.094326] [drm] Memory usable by graphics device = 2048M
[ 16.094332] [drm] Replacing VGA console driver
[ 16.098378] Console: switching to colour dummy device 80x25
[ 16.099029] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 16.099031] [drm] Driver supports precise vblank timestamp query.
[ 16.103766] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 16.104650] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 16.123221] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 16.136501] Bluetooth: Core ver 2.22
[ 16.136534] NET: Registered protocol family 31
[ 16.136536] Bluetooth: HCI device and connection manager initialized
[ 16.136710] Bluetooth: HCI socket layer initialized
[ 16.136715] Bluetooth: L2CAP socket layer initialized
[ 16.136725] Bluetooth: SCO socket layer initialized
[ 16.148161] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 16.149956] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 16.151657] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 16.342490] platform regulatory.0: firmware: failed to load regulatory.db (-2)
[ 16.342504] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 16.342509] cfg80211: failed to load regulatory.db
[ 16.356132] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 16.433620] usbcore: registered new interface driver btusb
[ 16.449443] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 16.449448] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin
[ 16.454420] kvm: disabled by bios
[ 16.456556] hp_wmi: query 0xd returned error 0x5
[ 16.456675] input: HP WMI hotkeys as /devices/virtual/input/input7
[ 16.504549] bluetooth hci0: firmware: failed to load rtl_bt/rtl8723b_config.bin (-2)
[ 16.504569] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[ 16.504574] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 16.563119] fbcon: inteldrmfb (fb0) is primary device
[ 16.595876] intel_rapl: Found RAPL domain package
[ 16.595877] intel_rapl: Found RAPL domain core
[ 16.664101] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8723b_fw.bin
[ 16.665525] Bluetooth: hci0: rom_version status=0 version=1
[ 16.665542] Bluetooth: hci0: cfg_sz 0, total size 22496
[ 16.835156] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 16.835159] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 16.835161] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 16.835163] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 16.835164] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 16.835167] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 16.835169] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 17.181190] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 17.184354] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 17.184463] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 17.184562] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 17.678408] rtl8723be: Using firmware rtlwifi/rtl8723befw_36.bin
[ 17.728311] rtl8723be 0000:02:00.0: firmware: direct-loading firmware rtlwifi/rtl8723befw_36.bin
[ 17.744739] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 17.745174] rtlwifi: rtlwifi: wireless switch is on
[ 17.765122] Adding 8075260k swap on /dev/sda5. Priority:-2 extents:1 across:8075260k FS
[ 17.854268] Console: switching to colour frame buffer device 170x48
[ 17.879677] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 19.950829] rtl8723be 0000:02:00.0 wlp2s0: renamed from wlan0
[ 23.145666] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.145670] Bluetooth: BNEP filters: protocol multicast
[ 23.145677] Bluetooth: BNEP socket layer initialized
[ 27.367302] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.395311] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8106e-1.fw
[ 27.569476] r8169 0000:03:00.0 eth0: link down
[ 27.569646] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.583590] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 28.196758] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 28.715838] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 28.901212] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 46.595971] Bluetooth: RFCOMM TTY layer initialized
[ 46.595992] Bluetooth: RFCOMM socket layer initialized
[ 46.596082] Bluetooth: RFCOMM ver 1.11
[ 72.365762] fuse init (API version 7.26)
[ 79.104427] rfkill: input handler disabled
[ 276.643821] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 276.706287] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 283.948463] [drm:i915_gem_idle_work_handler [i915]] *ERROR* Timeout waiting for engines to idle
[ 284.619430] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 286.242513] wlp2s0: authenticate with 0c:d2:b5:91:a8:0b
[ 286.254409] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 1/3)
[ 286.356333] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 2/3)
[ 286.460521] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 3/3)
[ 286.564335] wlp2s0: authentication with 0c:d2:b5:91:a8:0b timed out
[ 287.645745] wlp2s0: authenticate with 0c:d2:b5:91:a8:0b
[ 287.665356] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 1/3)
[ 287.768651] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 2/3)
[ 287.872543] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 3/3)
[ 287.976340] wlp2s0: authentication with 0c:d2:b5:91:a8:0b timed out
[ 289.470527] wlp2s0: authenticate with 0c:d2:b5:91:a8:0b
[ 289.481755] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 1/3)
[ 289.584528] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 2/3)
[ 289.688350] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 3/3)
[ 289.792343] wlp2s0: authentication with 0c:d2:b5:91:a8:0b timed out
[ 291.777187] wlp2s0: authenticate with 0c:d2:b5:91:a8:0b
[ 291.793046] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 1/3)
[ 291.896394] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 2/3)
[ 292.000344] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 3/3)
[ 292.104565] wlp2s0: authentication with 0c:d2:b5:91:a8:0b timed out
[ 302.084390] wlp2s0: authenticate with 0c:d2:b5:91:a8:0b
[ 302.097075] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 1/3)
[ 302.200356] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 2/3)
[ 302.304535] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 3/3)
[ 302.408340] wlp2s0: authentication with 0c:d2:b5:91:a8:0b timed out
[ 310.014938] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 310.536818] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 474.590908] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 476.186434] wlp2s0: authenticate with 0c:d2:b5:91:a8:0b
[ 476.208431] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 1/3)
[ 476.312255] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 2/3)
[ 476.416113] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 3/3)
[ 476.520078] wlp2s0: authentication with 0c:d2:b5:91:a8:0b timed out
[ 487.530440] wlp2s0: authenticate with 0c:d2:b5:91:a8:0b
[ 487.552591] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 1/3)
[ 487.656476] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 2/3)
[ 487.760086] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 3/3)
[ 487.864125] wlp2s0: authentication with 0c:d2:b5:91:a8:0b timed out
[ 500.018472] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 500.056159] ------------[ cut here ]------------
[ 500.056162] rtl8723be: error H2C cmd because of Fw download fail!!!
[ 500.056198] WARNING: CPU: 0 PID: 22 at /build/linux-PFKtCE/linux-4.15.4/drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c:227 rtl8723be_fill_h2c_cmd+0x103/0x440 [rtl8723be]
[ 500.056200] Modules linked in: fuse rfcomm cmac bnep arc4 rtl8723be btcoexist snd_hda_codec_hdmi rtl8723_common rtl_pci rtlwifi snd_hda_codec_realtek snd_hda_codec_generic intel_rapl intel_powerclamp coretemp mac80211 btusb btrtl btbcm btintel bluetooth cfg80211 i915 kvm drbg ansi_cprng ecdh_generic irqbypass hp_wmi wmi_bmof sparse_keymap crct10dif_pclmul crc32_pclmul iTCO_wdt iTCO_vendor_support ghash_clmulni_intel intel_cstate joydev evdev rfkill drm_kms_helper serio_raw snd_hda_intel snd_hda_codec drm pcspkr battery i2c_algo_bit snd_hda_core snd_hwdep snd_pcm snd_timer wmi int3403_thermal ac sg video int3400_thermal acpi_thermal_rel snd shpchp tpm_crb button processor_thermal_device int340x_thermal_zone intel_soc_dts_iosf hp_wireless lpc_ich mfd_core soundcore loop parport_pc ppdev sunrpc lp parport
[ 500.056274] ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb sd_mod sr_mod cdrom crc32c_intel aesni_intel aes_x86_64 crypto_simd cryptd glue_helper psmouse i2c_i801 xhci_pci r8169 mii xhci_hcd ahci libahci libata usbcore usb_common scsi_mod thermal fan
[ 500.056309] CPU: 0 PID: 22 Comm: kworker/0:1 Not tainted 4.15.0-1-amd64 #1 Debian 4.15.4-1
[ 500.056310] Hardware name: HP HP Notebook/80C5, BIOS F.1E 12/25/2015
[ 500.056320] Workqueue: rtl8723be_pci rtl_c2hcmd_wq_callback [rtlwifi]
[ 500.056326] RIP: 0010:rtl8723be_fill_h2c_cmd+0x103/0x440 [rtl8723be]
[ 500.056327] RSP: 0018:ffff9603c072fd88 EFLAGS: 00010286
[ 500.056330] RAX: 0000000000000000 RBX: ffff8831fa291500 RCX: 0000000000000006
[ 500.056332] RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff8831ffc166b0
[ 500.056333] RBP: 0000000000000030 R08: 00000000000002d0 R09: 0000000000000004
[ 500.056334] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8831fa291500
[ 500.056336] R13: 0000000000000000 R14: dead000000000100 R15: 0000000000000001
[ 500.056338] FS: 0000000000000000(0000) GS:ffff8831ffc00000(0000) knlGS:0000000000000000
[ 500.056340] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 500.056341] CR2: 00007f79275c7000 CR3: 000000014ff4a000 CR4: 00000000001006f0
[ 500.056343] Call Trace:
[ 500.056357] halbtc_set_bt_reg+0xb4/0xd0 [btcoexist]
[ 500.056363] ex_btc8723b1ant_bt_info_notify+0x307/0x6d0 [btcoexist]
[ 500.056370] rtl_c2hcmd_launcher+0xbb/0x120 [rtlwifi]
[ 500.056378] process_one_work+0x18d/0x390
[ 500.056381] worker_thread+0x2e/0x390
[ 500.056384] ? process_one_work+0x390/0x390
[ 500.056386] kthread+0x113/0x130
[ 500.056389] ? kthread_create_worker_on_cpu+0x70/0x70
[ 500.056394] ret_from_fork+0x35/0x40
[ 500.056397] Code: 41 80 bc 24 6c 08 00 00 00 75 c9 48 89 c6 48 89 ef e8 12 bf 3e cf eb a9 48 c7 c7 88 97 ac c0 c6 05 72 42 01 00 01 e8 6d ef db ce <0f> ff e9 3a ff ff ff 48 89 c6 41 c6 84 24 6c 08 00 00 01 48 89
[ 500.056444] ---[ end trace d3e37e79b47ff5a6 ]---
[ 500.543869] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 518.145143] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 518.218258] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 568.655201] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 570.305713] wlp2s0: authenticate with 0c:d2:b5:91:a8:0b
[ 570.323238] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 1/3)
[ 570.424565] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 2/3)
[ 570.528087] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 3/3)
[ 570.632329] wlp2s0: authentication with 0c:d2:b5:91:a8:0b timed out
[ 571.714908] wlp2s0: authenticate with 0c:d2:b5:91:a8:0b
[ 571.737377] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 1/3)
[ 571.840159] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 2/3)
[ 571.944687] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 3/3)
[ 572.052422] wlp2s0: authentication with 0c:d2:b5:91:a8:0b timed out
[ 573.548727] wlp2s0: authenticate with 0c:d2:b5:91:a8:0b
[ 573.563345] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 1/3)
[ 573.672439] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 2/3)
[ 573.776552] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 3/3)
[ 573.880382] wlp2s0: authentication with 0c:d2:b5:91:a8:0b timed out
[ 575.911119] wlp2s0: authenticate with 0c:d2:b5:91:a8:0b
[ 575.925628] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 1/3)
[ 576.028362] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 2/3)
[ 576.132237] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 3/3)
[ 576.236116] wlp2s0: authentication with 0c:d2:b5:91:a8:0b timed out
[ 586.250847] wlp2s0: authenticate with 0c:d2:b5:91:a8:0b
[ 586.263220] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 1/3)
[ 586.368404] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 2/3)
[ 586.477452] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 3/3)
[ 586.580426] wlp2s0: authentication with 0c:d2:b5:91:a8:0b timed out
[ 594.013362] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 594.538868] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
Reply to: