Your message dated Thu, 01 Feb 2018 21:50:28 +0000 with message-id <1517521828.5097.173.camel@decadent.org.uk> and subject line Re: Bug#865361: linux-image-4.9.0-3-amd64: kernel stuck at boot on HP ProLiant DL360 G4p has caused the Debian Bug report #865361, regarding linux-image-4.9.0-3-amd64: kernel stuck at boot on HP ProLiant DL360 G4p to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 865361: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=865361 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-4.9.0-3-amd64: kernel stuck at boot on HP ProLiant DL360 G4p
- From: Andreas Schwarz <bugs.debian.asc@schwarzes.net>
- Date: Tue, 20 Jun 2017 19:01:34 +0200
- Message-id: <149797809433.2397.7395716426272378472.reportbug@bean.nmc.hansenet.com>
Package: src:linux Version: 4.9.30-2+deb9u1 Severity: critical Justification: breaks the whole system After upgrading my systems to debian 9.0, which provides a 4.9.0-3-amd64 kernel our HP ProLiant DL360 G4p Systems stop booting the kernel and complain about a bug (NMI watchdog: BUG: soft lockup). This concerns all our DL360 G4p devices, others seem to work so far. On the affected machines I need to boot the former active 3.16.43-2 kernel. I got the folowing output when booting 4.9.30-2 [ 28.064000] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [swapper/0: 1] [ 56.064000] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [swapper/0: 1] [ 84.064000] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [swapper/0: 1] [ 112.064000] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0: 1] [...] When using the recovery mode with more output I'll get the following. [ 0.013363] process: using mwait in idle threads [ 0.013427] Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64 [ 0.013487] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0 [ 0.014062] Freeing SMP alternatives memory: 24K (ffffffffbe27a000 - ffffffff be280000) [ 0.017058] ftrace: allocating 25179 entries in 99 pages [ 0.028258] smpboot: Max logical packages: 8 [ 0.029000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.072000] smpboot: CPU0: Intel(R) Xeon(TM) CPU 3.20GHz (family: 0xf, model: 0x4, stepping: 0xa) [ 0.072000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.072000] ... version: 0 [ 0.072000] ... bit width: 40 [ 0.072000] ... generic registers: 18 [ 0.072000] ... value mask: 000000ffffffffff [ 0.072000] ... max period: 0000007fffffffff [ 0.072000] ... fixed-purpose events: 0 [ 0.072000] ... event mask: 000000000003ffff [ 0.072000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PM U counter. [ 0.072000] .... node #0, CPUs: #3[ 0.008000] smpboot: CPU 3 Converting physical 3 to logical package 1 [ 0.164261] #4 #7[ 0.346041] x86: Booted up 1 node, 4 CPUs [ 0.346041] smpboot: Total of 4 processors activated (25602.12 BogoMIPS) [ 28.068000] 0000000000000000 ffffffffbd4a74f1 0000000000000001 0000000000000 000 [ 28.068000] ffffffffbd4f9a58 ffffffffbd4a74f0 0000000000000005 ffffa058c031b e33 [ 28.068000] Call Trace: [ 28.068000] [<ffffffffbd4a74f0>] ? pick_next_task_idle+0x10/0x40 [ 28.068000] [<ffffffffbd42c950>] ? arch_unregister_cpu+0x20/0x20 [ 28.068000] [<ffffffffbd4a74f1>] ? pick_next_task_idle+0x11/0x40 [ 28.068000] [<ffffffffbd4f9a58>] ? on_each_cpu+0x28/0x50 [ 28.068000] [<ffffffffbd4a74f0>] ? pick_next_task_idle+0x10/0x40 [ 28.068000] [<ffffffffbd42d828>] ? text_poke_bp+0x68/0xe0 [ 28.068000] [<ffffffffbd4a74f0>] ? pick_next_task_idle+0x10/0x40 [ 28.068000] [<ffffffffbd42a5fc>] ? arch_jump_label_transform+0x9c/0x120 [ 28.068000] [<ffffffffbd578bd2>] ? __jump_label_update+0x72/0x80 [ 28.068000] [<ffffffffbd578eaf>] ? static_key_slow_inc+0x8f/0xa0 [ 28.068000] [<ffffffffbe15b936>] ? sched_init_smp+0x5c6/0x5f1 [ 28.068000] [<ffffffffbe13887b>] ? set_debug_rodata+0xc/0xc [ 28.068000] [<ffffffffbe13905e>] ? kernel_init_freeable+0xe7/0x1e8 [ 28.068000] [<ffffffffbd9f8d20>] ? rest_init+0x80/0x80 [ 28.068000] [<ffffffffbd9f8d2a>] ? kernel_init+0xa/0x100 [ 28.068000] [<ffffffffbda064f5>] ? ret_from_fork+0x25/0x30 [ 28.068000] Code: d2 e8 a9 4f 24 00 3b 05 c7 9f c1 00 89 c1 0f 8d 99 fe ff ff 48 98 49 8b 14 24 48 03 14 c5 c0 b3 e6 bd 8b 42 18 a8 01 74 09 f3 90 <8b> 42 18 a8 01 75 f7 eb bf 0f b6 4c 24 0c 48 83 c4 10 4c 89 f2 -- Package-specific info: ** Kernel log: boot messages should be attached ** Model information sys_vendor: HP product_name: ProLiant DL360 G4p product_version: chassis_vendor: HP chassis_version: bios_vendor: HP bios_version: P54 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation E7520 Memory Controller Hub [8086:3590] (rev 0c) Subsystem: Compaq Computer Corporation E7520 Memory Controller Hub [0e11:3200] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [40] Vendor Specific Information: Len=05 <?> Kernel modules: e752x_edac 00:02.0 PCI bridge [0604]: Intel Corporation E7525/E7520/E7320 PCI Express Port A [8086:3595] (rev 0c) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=0d, subordinate=0f, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit- Address: fee00000 Data: 0000 Capabilities: [64] Express (v1) Root Port (Slot-), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0 ExtTag- RBE- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 256 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x8, ASPM L0s, Exit Latency L0s <4us, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Kernel driver in use: pcieport Kernel modules: shpchp 00:04.0 PCI bridge [0604]: Intel Corporation E7525/E7520 PCI Express Port B [8086:3597] (rev 0c) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=06, subordinate=0c, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fdf00000-fdffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit- Address: fee00000 Data: 0000 Capabilities: [64] Express (v1) Root Port (Slot-), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0 ExtTag- RBE- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 256 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #4, Speed 2.5GT/s, Width x8, ASPM L0s, Exit Latency L0s <4us, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Kernel driver in use: pcieport Kernel modules: shpchp 00:06.0 PCI bridge [0604]: Intel Corporation E7520 PCI Express Port C [8086:3599] (rev 0c) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=03, subordinate=05, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit- Address: fee00000 Data: 0000 Capabilities: [64] Express (v1) Root Port (Slot-), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0 ExtTag- RBE- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 256 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #6, Speed 2.5GT/s, Width x8, ASPM L0s, Exit Latency L0s <4us, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.0 PCI bridge [0604]: Intel Corporation 6300ESB 64-bit PCI-X Bridge [8086:25ae] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 I/O behind bridge: 00004000-00004fff Memory behind bridge: fde00000-fdefffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] PCI-X bridge device Secondary Status: 64bit+ 133MHz- SCD- USC- SCO- SRD- Freq=66MHz Status: Dev=00:1c.0 64bit+ 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=65535 CommitmentLimit=0 Downstream: Capacity=65535 CommitmentLimit=0 Kernel modules: shpchp 00:1d.0 USB controller [0c03]: Intel Corporation 6300ESB USB Universal Host Controller [8086:25a9] (rev 02) (prog-if 00 [UHCI]) Subsystem: Compaq Computer Corporation 6300ESB USB Universal Host Controller [0e11:3201] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 6000 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 6300ESB USB Universal Host Controller [8086:25aa] (rev 02) (prog-if 00 [UHCI]) Subsystem: Compaq Computer Corporation 6300ESB USB Universal Host Controller [0e11:3201] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 6020 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.4 System peripheral [0880]: Intel Corporation 6300ESB Watchdog Timer [8086:25ab] (rev 02) Subsystem: Compaq Computer Corporation 6300ESB Watchdog Timer [0e11:3201] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at fbef0000 (32-bit, non-prefetchable) [size=16] Kernel driver in use: i6300ESB timer Kernel modules: i6300esb 00:1d.5 PIC [0800]: Intel Corporation 6300ESB I/O Advanced Programmable Interrupt Controller [8086:25ac] (rev 02) (prog-if 20 [IO(X)-APIC]) Subsystem: Compaq Computer Corporation 6300ESB I/O Advanced Programmable Interrupt Controller [0e11:3201] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [50] PCI-X non-bridge device Command: DPERE- ERO- RBC=512 OST=1 Status: Dev=00:1d.5 64bit+ 133MHz- SCD- USC- DC=simple DMMRBC=512 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz- 00:1d.7 USB controller [0c03]: Intel Corporation 6300ESB USB2 Enhanced Host Controller [8086:25ad] (rev 02) (prog-if 20 [EHCI]) Subsystem: Compaq Computer Corporation 6300ESB USB2 Enhanced Host Controller [0e11:3201] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at fbee0000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=0080 Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 0a) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 00001000-00003fff Memory behind bridge: fbf00000-fcffffff Prefetchable memory behind bridge: 80000000-800fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00:1f.0 ISA bridge [0601]: Intel Corporation 6300ESB LPC Interface Controller [8086:25a1] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel driver in use: lpc_ich Kernel modules: intel_rng, lpc_ich 00:1f.1 IDE interface [0101]: Intel Corporation 6300ESB PATA Storage Controller [8086:25a2] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Compaq Computer Corporation 6300ESB PATA Storage Controller [0e11:3201] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 Region 4: I/O ports at 0500 [size=16] Region 5: Memory at 80100000 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: ata_piix Kernel modules: ata_piix, ata_generic 01:03.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Rage XL PCI [1002:4752] (rev 27) (prog-if 00 [VGA controller]) Subsystem: Compaq Computer Corporation Proliant Rage XL [0e11:001e] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2000ns min), Cache Line Size: 64 bytes Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at 3000 [size=256] Region 2: Memory at fbff0000 (32-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [5c] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel modules: atyfb 01:04.0 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Controller [0e11:b203] (rev 01) Subsystem: Compaq Computer Corporation Integrated Lights Out Controller [0e11:b206] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at 1800 [size=256] Region 1: Memory at fbfe0000 (32-bit, non-prefetchable) [size=512] Capabilities: [f0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel modules: hpwdt 01:04.2 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Processor [0e11:b204] (rev 01) Subsystem: Compaq Computer Corporation Integrated Lights Out Processor [0e11:b206] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 22 Region 0: I/O ports at 3400 [size=256] Region 1: Memory at fbfd0000 (32-bit, non-prefetchable) [size=2K] Region 2: Memory at fbfc0000 (32-bit, non-prefetchable) [size=8K] Region 3: Memory at fbf00000 (32-bit, non-prefetchable) [size=512K] [virtual] Expansion ROM at 80020000 [disabled] [size=64K] Capabilities: [f0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: hpilo Kernel modules: hpilo 02:01.0 RAID bus controller [0104]: Compaq Computer Corporation Smart Array 64xx [0e11:0046] (rev 01) Subsystem: Compaq Computer Corporation Smart Array 6i [0e11:4091] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 24 Region 0: Memory at fdef0000 (64-bit, non-prefetchable) [size=8K] Region 2: I/O ports at 4000 [size=256] Region 3: Memory at fde80000 (64-bit, non-prefetchable) [size=256K] [virtual] Expansion ROM at fde00000 [disabled] [size=256K] Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [dc] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=8 Status: Dev=02:01.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=8 DMCRS=32 RSCEM- 266MHz- 533MHz- Capabilities: [f0] Vital Product Data Not readable Kernel driver in use: cciss Kernel modules: cciss 02:02.0 Ethernet controller [0200]: Broadcom Limited NetXtreme BCM5704 Gigabit Ethernet [14e4:1648] (rev 10) Subsystem: Compaq Computer Corporation NC7782 Gigabit Server Adapter (PCI-X, 10,100,1000-T) [0e11:00d0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 25 Region 0: Memory at fde70000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: [40] PCI-X non-bridge device Command: DPERE- ERO- RBC=2048 OST=1 Status: Dev=02:02.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz- Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Product Name: HP NC7782 Gigabit Server Adapter Read-only fields: [PN] Part number: 349321-001 [EC] Engineering changes: N/A [SN] Serial number: 0123456789 [MN] Manufacture ID: 31 34 65 34 [RV] Reserved: checksum bad, 46 byte(s) reserved Read/write fields: [YA] Asset tag: N/A [RW] Read-write area: 115 byte(s) free End Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+ Address: cfdff57d9ffdd678 Data: ddfb Kernel driver in use: tg3 Kernel modules: tg3 02:02.1 Ethernet controller [0200]: Broadcom Limited NetXtreme BCM5704 Gigabit Ethernet [14e4:1648] (rev 10) Subsystem: Compaq Computer Corporation NC7782 Gigabit Server Adapter (PCI-X, 10,100,1000-T) [0e11:00d0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 26 Region 0: Memory at fde60000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: [40] PCI-X non-bridge device Command: DPERE- ERO- RBC=2048 OST=1 Status: Dev=02:02.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz- Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Product Name: HP NC7782 Gigabit Server Adapter Read-only fields: [PN] Part number: 349321-001 [EC] Engineering changes: N/A [SN] Serial number: 0123456789 [MN] Manufacture ID: 31 34 65 34 [RV] Reserved: checksum bad, 46 byte(s) reserved Read/write fields: [YA] Asset tag: N/A [RW] Read-write area: 115 byte(s) free End Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+ Address: f3ffffd7fffeb7fc Data: f5f8 Kernel driver in use: tg3 Kernel modules: tg3 06:00.0 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A [8086:0329] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=06, secondary=07, subordinate=09, sec-latency=64 I/O behind bridge: 00005000-00005fff Memory behind bridge: fdf00000-fdffffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [44] Express (v1) PCI-Express to PCI/PCI-X Bridge, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0 ExtTag- AttnBtn- AttnInd- PwrInd- RBE- SlotPowerLimit 0.000W DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry- MaxPayload 256 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr+ UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Exit Latency L0s unlimited, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [6c] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [d8] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz Status: Dev=06:00.0 64bit- 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=65535 CommitmentLimit=65535 Downstream: Capacity=65535 CommitmentLimit=65535 Kernel modules: shpchp 06:00.2 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B [8086:032a] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=06, secondary=0a, subordinate=0c, sec-latency=64 Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [44] Express (v1) PCI-Express to PCI/PCI-X Bridge, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0 ExtTag- AttnBtn- AttnInd- PwrInd- RBE- SlotPowerLimit 0.000W DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry- MaxPayload 256 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr+ UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Exit Latency L0s unlimited, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [6c] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [d8] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz Status: Dev=06:00.2 64bit- 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=65535 CommitmentLimit=65535 Downstream: Capacity=65535 CommitmentLimit=65535 Kernel modules: shpchp 07:01.0 Ethernet controller [0200]: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) [8086:1010] (rev 01) Subsystem: Compaq Computer Corporation NC7170 Gigabit Server Adapter [0e11:00db] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (63750ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fdfe0000 (64-bit, non-prefetchable) [size=128K] Region 2: Memory at fdf80000 (64-bit, non-prefetchable) [size=256K] Region 4: I/O ports at 5000 [size=64] [virtual] Expansion ROM at fdf00000 [disabled] [size=256K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [e4] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=1 Status: Dev=07:01.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz- Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: e1000 Kernel modules: e1000 07:01.1 Ethernet controller [0200]: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) [8086:1010] (rev 01) Subsystem: Compaq Computer Corporation NC7170 Gigabit Server Adapter [0e11:00db] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (63750ns min), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fdf60000 (64-bit, non-prefetchable) [size=128K] Region 4: I/O ports at 5040 [size=64] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [e4] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=1 Status: Dev=07:01.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz- Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: e1000 Kernel modules: e1000 ** USB devices: Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 9.0 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.9.0-3-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.130 ii kmod 23-2 ii linux-base 4.5 Versions of packages linux-image-4.9.0-3-amd64 recommends: ii firmware-linux-free 3.4 ii irqbalance 1.1.0-2.3 Versions of packages linux-image-4.9.0-3-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02~beta3-5 pn linux-doc-4.9 <none> Versions of packages linux-image-4.9.0-3-amd64 is related to: ii firmware-amd-graphics 20161130-3 pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux-nonfree 20161130-3 ii firmware-misc-nonfree 20161130-3 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
--- End Message ---
--- Begin Message ---
- To: 865361-done@bugs.debian.org
- Subject: Re: Bug#865361: linux-image-4.9.0-3-amd64: kernel stuck at boot on HP ProLiant DL360 G4p
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Thu, 01 Feb 2018 21:50:28 +0000
- Message-id: <1517521828.5097.173.camel@decadent.org.uk>
- In-reply-to: <4b6617a0715.7b797baf@mail.schwarzes.net>
- References: <149797809433.2397.7395716426272378472.reportbug@bean.nmc.hansenet.com> <4b6617a0715.7b797baf@mail.schwarzes.net>
Version: 4.9.65-3+deb9u2 On Wed, 2018-01-31 at 23:52 +0100, Andreas Schwarz wrote: > I can confirm that the bug is gone with "linux-image-4.9.0-5-amd64", > tested with a system > which was affected before. I expect that this was fixed by an earlier update, but am closing this with the current version since that's the information we have. Thanks for confirming. Ben. -- Ben Hutchings All extremists should be taken out and shot.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---