Bug#887304: linux-image-4.14.0-0.bpo.2-amd64: Error crypto/algapi.c:348 and a long system boot.
Package: src:linux
Version: 4.14.7-1~bpo9+1
Severity: important
PC: Samsung NP300U1A.
Installed kernel 'linux-image-4.11.0-0.bpo.1-amd64' (ver. 4.11.6-1~bpo9+1) works without problems.
Kernels 'linux-image-4.13.0-0.bpo.1-amd64' (ver. 4.13.13-1~bpo9+1) and 'linux-image-4.14.0-0.bpo.2-amd64' (ver. 4.14.7-1~bpo9+1) indicates an error.
After the error message, the system waits 120 seconds and continues to load.
-- Package-specific info:
** Version:
Linux version 4.14.0-0.bpo.2-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #1 SMP Debian 4.14.7-1~bpo9+1 (2017-12-22)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.14.0-0.bpo.2-amd64 root=UUID=1483b39e-df68-4eca-a256-b03905c96e83 ro quiet
** Tainted: DW (640)
* Kernel has oopsed before.
* Taint on warning.
** Kernel log:
[ 190.873006] task: ffff902f1964d080 task.stack: ffffad61009c4000
[ 190.876933] RIP: 0010:crypto_wait_for_test+0x52/0x60
[ 190.880869] RSP: 0018:ffffad61009c7c68 EFLAGS: 00010286
[ 190.884802] RAX: 00000000fffffe00 RBX: ffff902f195a1c00 RCX: 0000000000000000
[ 190.888788] RDX: 0000000000000000 RSI: ffff902f1964db40 RDI: ffff902f195a1db0
[ 190.892611] RBP: ffffad61009c7c70 R08: 0000000000000001 R09: 0000000000000017
[ 190.896273] R10: ffffad61009c7c00 R11: 00000000000000a9 R12: 0000000000000000
[ 190.899867] R13: 0000000000000000 R14: ffffffffc06c3380 R15: ffffffffc06c33d0
[ 190.903470] FS: 00007f741cdc88c0(0000) GS:ffff902f1b000000(0000) knlGS:0000000000000000
[ 190.907115] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 190.910742] CR2: 00007fffb6403be8 CR3: 0000000119652002 CR4: 00000000000606f0
[ 190.914406] Call Trace:
[ 190.918046] crypto_register_alg+0x5b/0x70
[ 190.921726] ? ecdh_set_secret+0xb0/0xb0 [ecdh_generic]
[ 190.925381] crypto_register_kpp+0x29/0x30
[ 190.929009] ecdh_init+0x15/0x20 [ecdh_generic]
[ 190.932621] do_one_initcall+0x52/0x1a0
[ 190.936215] ? __vunmap+0x81/0xb0
[ 190.939753] ? do_init_module+0x27/0x209
[ 190.943265] do_init_module+0x5f/0x209
[ 190.946749] load_module+0x25aa/0x2ce0
[ 190.950198] ? security_kernel_post_read_file+0x6b/0x80
[ 190.953618] SYSC_finit_module+0xe5/0x120
[ 190.957027] ? SYSC_finit_module+0xe5/0x120
[ 190.960372] SyS_finit_module+0xe/0x10
[ 190.963633] system_call_fast_compare_end+0xc/0x97
[ 190.966907] RIP: 0033:0x7f741c6d8229
[ 190.970140] RSP: 002b:00007fff7dc580b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 190.973406] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f741c6d8229
[ 190.976661] RDX: 0000000000000000 RSI: 00007f741c3ee265 RDI: 000000000000000c
[ 190.979883] RBP: 00007fff7dc570b0 R08: 0000000000000000 R09: 0000561d6ad65740
[ 190.983109] R10: 000000000000000c R11: 0000000000000246 R12: 0000000000000005
[ 190.986357] R13: 0000561d6ad66b10 R14: 00007fff7dc57090 R15: 0000000000000005
[ 190.989572] Code: 75 2d 48 8d bb b8 00 00 00 31 f6 e8 b9 fd ff ff 48 8d bb a8 01 00 00 e8 cd 46 38 00 85 c0 75 0b 48 89 df e8 61 dc ff ff 5b 5d c3 <0f> ff eb f1 0f ff eb ed 66 0f 1f 44 00 00 66 66 66 66 90 55 48
[ 190.996457] ---[ end trace ab7c9b4b8d3378c2 ]---
[ 191.006863] Bluetooth: Core ver 2.22
[ 191.009112] NET: Registered protocol family 31
[ 191.011278] Bluetooth: HCI device and connection manager initialized
[ 191.013866] Bluetooth: HCI socket layer initialized
[ 191.015971] Bluetooth: L2CAP socket layer initialized
[ 191.018004] Bluetooth: SCO socket layer initialized
[ 191.092013] raid6: sse2x1 gen() 3380 MB/s
[ 191.160011] raid6: sse2x1 xor() 2695 MB/s
[ 191.228013] raid6: sse2x2 gen() 4345 MB/s
[ 191.296023] raid6: sse2x2 xor() 3121 MB/s
[ 191.364024] raid6: sse2x4 gen() 5041 MB/s
[ 191.432013] raid6: sse2x4 xor() 3831 MB/s
[ 191.433561] raid6: using algorithm sse2x4 gen() 5041 MB/s
[ 191.435108] raid6: .... xor() 3831 MB/s, rmw enabled
[ 191.436664] raid6: using ssse3x2 recovery algorithm
[ 191.440735] xor: automatically using best checksumming function avx
[ 191.455930] Btrfs loaded, crc32c=crc32c-intel
[ 191.462920] usbcore: registered new interface driver btusb
[ 191.495836] device-mapper: uevent: version 1.0.3
[ 191.497814] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 191.539350] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 191.596633] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 192.298890] BTRFS: device label rootfs devid 1 transid 151116 /dev/sda3
[ 192.331454] PM: Starting manual resume from disk
[ 192.333590] PM: Image not found (code -22)
[ 192.539915] BTRFS info (device sda3): disk space caching is enabled
[ 192.541533] BTRFS info (device sda3): has skinny extents
[ 193.408658] random: crng init done
[ 195.861256] systemd[1]: systemd 236 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 195.866048] systemd[1]: Detected architecture x86-64.
[ 195.878464] systemd[1]: Set hostname to <NP300U1A>.
[ 196.683821] systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 196.689890] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 196.857342] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 196.862843] systemd[1]: Created slice User and Session Slice.
[ 196.865971] systemd[1]: Created slice System Slice.
[ 196.870868] systemd[1]: Mounting POSIX Message Queue File System...
[ 196.874605] systemd[1]: Listening on Journal Socket (/dev/log).
[ 197.603022] BTRFS info (device sda3): use lzo compression
[ 197.606420] BTRFS info (device sda3): disk space caching is enabled
[ 197.813950] systemd-journald[470]: Received request to flush runtime journal from PID 1
[ 199.467192] Adding 8388604k swap on /dev/sda2. Priority:-2 extents:1 across:8388604k FS
[ 202.742311] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 202.755087] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[ 203.058457] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[ 203.147209] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 203.175114] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[ 203.479071] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[ 203.563255] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 204.377963] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 206.350551] fuse init (API version 7.26)
[ 208.188883] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[ 208.491076] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[ 208.575293] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 208.630181] wlp1s0: authenticate with d4:ca:6d:92:b1:d1
[ 208.634599] wlp1s0: send auth to d4:ca:6d:92:b1:d1 (try 1/3)
[ 208.637772] wlp1s0: authenticated
[ 208.641994] wlp1s0: associate with d4:ca:6d:92:b1:d1 (try 1/3)
[ 208.650476] wlp1s0: RX AssocResp from d4:ca:6d:92:b1:d1 (capab=0x431 status=0 aid=2)
[ 208.679019] wlp1s0: associated
[ 208.679103] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 843.375250] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[ 843.407612] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
[ 844.174724] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[ 844.209727] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
** Model information
sys_vendor: SAMSUNG ELECTRONICS CO., LTD.
product_name: 350U2A/350U2B/300U1A/351U2A/351U2B/301U1A
product_version: 07PY
chassis_vendor: SAMSUNG ELECTRONICS CO., LTD.
chassis_version: N/A
bios_vendor: American Megatrends Inc.
bios_version: 07PY.M022.20121025.WZW
board_vendor: SAMSUNG ELECTRONICS CO., LTD.
board_name: 350U2A/350U2B/300U1A/351U2A/351U2B/301U1A
board_version: 07PY
** Loaded modules:
fuse
sg
overlay
ip_tables
x_tables
efivarfs
dm_mod
ctr
cpuid
ccm
btusb
btrtl
btrfs
crc32c_generic
xor
zstd_decompress
zstd_compress
xxhash
raid6_pq
btintel
btbcm
bluetooth
autofs4
sd_mod
snd_hda_codec_hdmi
uvcvideo
videobuf2_vmalloc
joydev
videobuf2_memops
videobuf2_v4l2
videobuf2_core
videodev
media
snd_hda_codec_realtek
snd_hda_codec_generic
ecdh_generic
crc16
arc4
intel_rapl
x86_pkg_temp_thermal
intel_powerclamp
coretemp
kvm_intel
kvm
irqbypass
crct10dif_pclmul
crc32_pclmul
crc32c_intel
iwldvm
iTCO_wdt
iTCO_vendor_support
efi_pstore
ghash_clmulni_intel
mac80211
cryptd
snd_hda_intel
intel_cstate
intel_uncore
intel_rapl_perf
snd_hda_codec
snd_hwdep
snd_hda_core
psmouse
ahci
libahci
iwlwifi
ehci_pci
ehci_hcd
lpc_ich
libata
pcspkr
serio_raw
efivars
i2c_i801
evdev
i915
i2c_algo_bit
mfd_core
scsi_mod
usbcore
drm_kms_helper
usb_common
cfg80211
snd_pcm
snd_timer
rfkill
mei_me
snd
drm
shpchp
soundcore
mei
fan
thermal
battery
wmi
video
ac
button
** Network interface configuration:
-- System Information:
Debian Release: 9.3
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'proposed-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.14.0-0.bpo.2-amd64 (SMP w/4 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), LANGUAGE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.14.0-0.bpo.2-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.130
ii kmod 23-2
ii linux-base 4.5
Versions of packages linux-image-4.14.0-0.bpo.2-amd64 recommends:
pn apparmor <none>
pn firmware-linux-free <none>
pn irqbalance <none>
Versions of packages linux-image-4.14.0-0.bpo.2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.02~beta3-5
pn linux-doc-4.14 <none>
Versions of packages linux-image-4.14.0-0.bpo.2-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 20170823-1~bpo9+1
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20170823-1~bpo9+1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: