Bug#886554: marked as done (linux-image-4.9.0-5-amd64: OOcannot connect into a wifi network)

To: Yves-Alexis Perez <corsac@debian.org>
Subject: Bug#886554: marked as done (linux-image-4.9.0-5-amd64: OOcannot connect into a wifi network)
From: "Debian Bug Tracking System" <owner@bugs.debian.org>
Date: Mon, 08 Jan 2018 19:21:13 +0000
Message-id: <[🔎] handler.886554.D886554.15154391599263.ackdone@bugs.debian.org>
Reply-to: 886554@bugs.debian.org
References: <1515439144.3305.67.camel@debian.org> <[🔎] 151534211156.1662.8798132961492862887.reportbug@diamvw>

Your message dated Mon, 08 Jan 2018 20:19:04 +0100
with message-id <1515439144.3305.67.camel@debian.org>
and subject line Re: Bug#886554: linux-image-4.9.0-5-amd64: OOcannot connect into a wifi network
has caused the Debian Bug report #886554,
regarding linux-image-4.9.0-5-amd64: OOcannot connect into a wifi network
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
886554: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=886554
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems

--- Begin Message ---

To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: linux-image-4.9.0-5-amd64: OOcannot connect into a wifi network
From: Karagkiaouris Diamantis <diamantis.karagkiaouris.dev@gmail.com>
Date: Sun, 07 Jan 2018 18:21:51 +0200
Message-id: <[🔎] 151534211156.1662.8798132961492862887.reportbug@diamvw>

Package: src:linux
Version: 4.9.65-3+deb9u2
Severity: important

Dear Maintainer,

After the latest upgrade i cannot connect to a wifi network.
The dmesg output is:

[   19.462420] wlo1: authenticate with d4:21:22:4a:61:09
[   19.486653] wlo1: send auth to d4:21:22:4a:61:09 (try 1/3)
[   19.588170] wlo1: send auth to d4:21:22:4a:61:09 (try 2/3)
[   19.692181] wlo1: send auth to d4:21:22:4a:61:09 (try 3/3)
[   19.796340] wlo1: authentication with d4:21:22:4a:61:09 timed out
[   20.866533] wlo1: authenticate with d4:21:22:4a:61:09
[   20.889199] wlo1: send auth to d4:21:22:4a:61:09 (try 1/3)
[   20.992429] wlo1: send auth to d4:21:22:4a:61:09 (try 2/3)
[   21.096455] wlo1: send auth to d4:21:22:4a:61:09 (try 3/3)
[   21.200468] wlo1: authentication with d4:21:22:4a:61:09 timed out
[   22.683283] wlo1: authenticate with d4:21:22:4a:61:09
[   22.705897] wlo1: send auth to d4:21:22:4a:61:09 (try 1/3)
[   22.808396] wlo1: send auth to d4:21:22:4a:61:09 (try 2/3)
[   22.912444] wlo1: send auth to d4:21:22:4a:61:09 (try 3/3)
[   23.016377] wlo1: authentication with d4:21:22:4a:61:09 timed out
[   24.998679] wlo1: authenticate with d4:21:22:4a:61:09
[   25.024741] wlo1: send auth to d4:21:22:4a:61:09 (try 1/3)
[   25.128382] wlo1: send auth to d4:21:22:4a:61:09 (try 2/3)
[   25.232383] wlo1: send auth to d4:21:22:4a:61:09 (try 3/3)
[   25.336423] wlo1: authentication with d4:21:22:4a:61:09 timed out

My wifi network card driver is rtl8723be.

Kind regards,
Diamantis


-- Package-specific info:
** Version:
Linux version 4.9.0-5-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.65-3+deb9u2 (2018-01-04)

** Command line:
BOOT_IMAGE=/vmlinuz-4.9.0-5-amd64 root=/dev/mapper/diamvw--vg-root ro quiet

** Not tainted

** Kernel log:
[    2.536826] input: HP TrueVision HD as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input9
[    2.536884] usbcore: registered new interface driver uvcvideo
[    2.536885] USB Video Class driver (1.1.1)
[    2.537204] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.538471] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[    2.538785] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    2.540200] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.541481] fbcon: inteldrmfb (fb0) is primary device
[    2.567388] pstore: Registered efi as persistent store backend
[    2.569055] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    2.569613] rtlwifi: rtlwifi: wireless switch is on
[    2.592365] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    2.592367] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.592368] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    2.592368] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    2.592369] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    2.592370] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
[    2.592370] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    2.610727] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    2.611657] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    2.611958] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    2.612024] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    2.612078] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    2.612129] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    2.613083] Adding 4104188k swap on /dev/mapper/diamvw--vg-swap_1.  Priority:-1 extents:1 across:4104188k SSFS
[    2.673701] rtl8723be 0000:02:00.0 wlo1: renamed from wlan0
[    2.718430] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[    2.740019] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[    2.756256] clocksource: Switched to clocksource tsc
[    2.772648] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[    2.878123] random: crng init done
[    3.166872] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.166873] Bluetooth: BNEP filters: protocol multicast
[    3.166877] Bluetooth: BNEP socket layer initialized
[    3.310227] input: HP WMI hotkeys as /devices/virtual/input/input11
[    3.684999] Console: switching to colour frame buffer device 170x48
[    3.708030] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.812569] [drm] RC6 on
[    3.883529] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[    3.884837] r8169 0000:01:00.0: firmware: direct-loading firmware rtl_nic/rtl8106e-1.fw
[    4.069348] r8169 0000:01:00.0 enp1s0: link down
[    4.069436] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[    4.078917] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[    4.931254] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[    5.652873] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[    5.725958] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   18.433009] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   19.462420] wlo1: authenticate with d4:21:22:4a:61:09
[   19.486653] wlo1: send auth to d4:21:22:4a:61:09 (try 1/3)
[   19.588170] wlo1: send auth to d4:21:22:4a:61:09 (try 2/3)
[   19.692181] wlo1: send auth to d4:21:22:4a:61:09 (try 3/3)
[   19.796340] wlo1: authentication with d4:21:22:4a:61:09 timed out
[   20.866533] wlo1: authenticate with d4:21:22:4a:61:09
[   20.889199] wlo1: send auth to d4:21:22:4a:61:09 (try 1/3)
[   20.992429] wlo1: send auth to d4:21:22:4a:61:09 (try 2/3)
[   21.096455] wlo1: send auth to d4:21:22:4a:61:09 (try 3/3)
[   21.200468] wlo1: authentication with d4:21:22:4a:61:09 timed out
[   22.683283] wlo1: authenticate with d4:21:22:4a:61:09
[   22.705897] wlo1: send auth to d4:21:22:4a:61:09 (try 1/3)
[   22.808396] wlo1: send auth to d4:21:22:4a:61:09 (try 2/3)
[   22.912444] wlo1: send auth to d4:21:22:4a:61:09 (try 3/3)
[   23.016377] wlo1: authentication with d4:21:22:4a:61:09 timed out
[   24.998679] wlo1: authenticate with d4:21:22:4a:61:09
[   25.024741] wlo1: send auth to d4:21:22:4a:61:09 (try 1/3)
[   25.128382] wlo1: send auth to d4:21:22:4a:61:09 (try 2/3)
[   25.232383] wlo1: send auth to d4:21:22:4a:61:09 (try 3/3)
[   25.336423] wlo1: authentication with d4:21:22:4a:61:09 timed out
[   34.519547] r8169 0000:01:00.0 enp1s0: link up
[   34.519568] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[   37.274673] wlo1: authenticate with d4:21:22:4a:61:09
[   37.296126] wlo1: send auth to d4:21:22:4a:61:09 (try 1/3)
[   37.400216] wlo1: send auth to d4:21:22:4a:61:09 (try 2/3)
[   37.504256] wlo1: send auth to d4:21:22:4a:61:09 (try 3/3)
[   37.608428] wlo1: authentication with d4:21:22:4a:61:09 timed out
[   44.021215] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   44.665201] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[  308.509551] usb 1-2: new high-speed USB device number 5 using xhci_hcd
[  308.669471] usb 1-2: New USB device found, idVendor=03f0, idProduct=3e17
[  308.669478] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  308.669483] usb 1-2: Product: HP LaserJet P1006
[  308.669487] usb 1-2: Manufacturer: Hewlett-Packard
[  308.669490] usb 1-2: SerialNumber: AC1F5FD
[  312.160697] usblp 1-2:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3E17
[  312.160719] usbcore: registered new interface driver usblp
[  317.242902] usblp1: removed
[  317.259278] usblp 1-2:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3E17
[  318.042098] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=2a02:0587:4842:2200:65c5:c308:e7c3:7fb7 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=650944 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[  318.042111] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=2a02:0587:4842:2200:65c5:c308:e7c3:7fb7 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=418317 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[  318.042119] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=2a02:0587:4842:2200:32e1:71ff:fe93:e481 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=117094 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[  318.042126] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=2a02:0587:4842:2200:32e1:71ff:fe93:e481 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=571276 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[  318.042133] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:32e1:71ff:fe93:e481 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=37334 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[  318.042139] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:32e1:71ff:fe93:e481 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=274105 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[  318.052288] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=2a02:0587:4842:2200:65c5:c308:e7c3:7fb7 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=650944 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[  318.052296] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=2a02:0587:4842:2200:65c5:c308:e7c3:7fb7 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=418317 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[  318.052303] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=2a02:0587:4842:2200:32e1:71ff:fe93:e481 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=117094 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[  318.052309] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=2a02:0587:4842:2200:32e1:71ff:fe93:e481 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=571276 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[  341.990089] usblp1: removed
[  367.844017] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=2a02:0587:4842:2200:65c5:c308:e7c3:7fb7 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=650944 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[  367.844027] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=2a02:0587:4842:2200:65c5:c308:e7c3:7fb7 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=418317 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[  387.288239] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready

** Model information
sys_vendor: HP
product_name: HP Notebook
product_version: Type1ProductConfigId
chassis_vendor: HP
chassis_version: Chassis Version
bios_vendor: Insyde
bios_version: F.21
board_vendor: HP
board_name: 81ED
board_version: 62.36

** Loaded modules:
usblp
cmac
bnep
nls_ascii
nls_cp437
vfat
fat
snd_hda_codec_hdmi
snd_soc_skl
snd_soc_skl_ipc
snd_hda_codec_realtek
snd_soc_sst_ipc
snd_hda_codec_generic
snd_soc_sst_dsp
snd_hda_ext_core
snd_soc_sst_match
snd_soc_core
hp_wmi
snd_compress
arc4
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
efi_pstore
videobuf2_core
rtl8723be
videodev
intel_rapl
btcoexist
media
x86_pkg_temp_thermal
rtl8723_common
intel_powerclamp
coretemp
rtl_pci
rtlwifi
kvm_intel
snd_hda_intel
mac80211
kvm
snd_hda_codec
snd_hda_core
irqbypass
crct10dif_pclmul
i915
snd_hwdep
snd_pcm
crc32_pclmul
cfg80211
snd_timer
snd
joydev
soundcore
ghash_clmulni_intel
btusb
btrtl
evdev
drm_kms_helper
efivars
serio_raw
pcspkr
drm
iTCO_wdt
iTCO_vendor_support
i2c_algo_bit
sg
mei_me
processor_thermal_device
mei
shpchp
intel_soc_dts_iosf
intel_pch_thermal
ucsi
wmi
hci_uart
btbcm
btqca
btintel
bluetooth
intel_vbtn
ip6t_REJECT
kxcjk_1013
intel_hid
nf_reject_ipv6
intel_lpss_acpi
industrialio_triggered_buffer
soc_button_array
kfifo_buf
int3403_thermal
sparse_keymap
intel_lpss
rfkill
battery
int340x_thermal_zone
nf_log_ipv6
industrialio
dptf_power
mfd_core
ac
int3406_thermal
tpm_crb
video
int3400_thermal
hp_wireless
acpi_thermal_rel
acpi_pad
button
xt_hl
ip6t_rt
nf_conntrack_ipv6
nf_defrag_ipv6
ipt_REJECT
nf_reject_ipv4
nf_log_ipv4
nf_log_common
xt_LOG
xt_limit
xt_tcpudp
xt_addrtype
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
ip6table_filter
ip6_tables
nf_conntrack_netbios_ns
nf_conntrack_broadcast
nf_nat_ftp
nf_nat
nf_conntrack_ftp
nf_conntrack
iptable_filter
parport_pc
ppdev
lp
parport
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
jbd2
crc32c_generic
fscrypto
ecb
mbcache
hid_generic
usbhid
dm_mod
sr_mod
sd_mod
cdrom
crc32c_intel
aesni_intel
aes_x86_64
glue_helper
lrw
gf128mul
ablk_helper
cryptd
psmouse
ahci
libahci
i2c_i801
xhci_pci
i2c_smbus
libata
xhci_hcd
r8169
mii
scsi_mod
usbcore
usb_common
thermal
fan
i2c_hid
hid

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Device [8086:5904] (rev 02)
	Subsystem: Hewlett-Packard Company Device [103c:81ed]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:5916] (rev 02) (prog-if 00 [VGA controller])
	Subsystem: Hewlett-Packard Company Device [103c:81ed]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 126
	Region 0: Memory at b0000000 (64-bit, non-prefetchable) [size=16M]
	Region 2: Memory at a0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at 5000 [size=64]
	[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: i915
	Kernel modules: i915

00:04.0 Signal processing controller [1180]: Intel Corporation Skylake Processor Thermal Subsystem [8086:1903] (rev 02)
	Subsystem: Hewlett-Packard Company Skylake Processor Thermal Subsystem [103c:81ed]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at b1320000 (64-bit, non-prefetchable) [size=32K]
	Capabilities: <access denied>
	Kernel driver in use: proc_thermal
	Kernel modules: processor_thermal_device

00:08.0 System peripheral [0880]: Intel Corporation Skylake Gaussian Mixture Model [8086:1911]
	Subsystem: Hewlett-Packard Company Skylake Gaussian Mixture Model [103c:81ed]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 255
	Region 0: Memory at b1332000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>

00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller [8086:9d2f] (rev 21) (prog-if 30 [XHCI])
	Subsystem: Hewlett-Packard Company Sunrise Point-LP USB 3.0 xHCI Controller [103c:81ed]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 123
	Region 0: Memory at b1300000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci

00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Thermal subsystem [8086:9d31] (rev 21)
	Subsystem: Hewlett-Packard Company Sunrise Point-LP Thermal subsystem [103c:81ed]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at b1333000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: intel_pch_thermal
	Kernel modules: intel_pch_thermal

00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI #1 [8086:9d3a] (rev 21)
	Subsystem: Hewlett-Packard Company Sunrise Point-LP CSME HECI [103c:81ed]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 125
	Region 0: Memory at b1334000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: mei_me
	Kernel modules: mei_me

00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] [8086:9d03] (rev 21) (prog-if 01 [AHCI 1.0])
	Subsystem: Hewlett-Packard Company Sunrise Point-LP SATA Controller [AHCI mode] [103c:81ed]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 124
	Region 0: Memory at b1330000 (32-bit, non-prefetchable) [size=8K]
	Region 1: Memory at b1337000 (32-bit, non-prefetchable) [size=256]
	Region 2: I/O ports at 5080 [size=8]
	Region 3: I/O ports at 5088 [size=4]
	Region 4: I/O ports at 5060 [size=32]
	Region 5: Memory at b1335000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 [8086:9d14] (rev f1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: b1200000-b12fffff
	Prefetchable memory behind bridge: 00000000b1000000-00000000b10fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.5 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 [8086:9d15] (rev f1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: b1100000-b11fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:9d58] (rev 21)
	Subsystem: Hewlett-Packard Company Device [103c:81ed]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC [8086:9d21] (rev 21)
	Subsystem: Hewlett-Packard Company Sunrise Point-LP PMC [103c:81ed]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at b132c000 (32-bit, non-prefetchable) [size=16K]

00:1f.3 Audio device [0403]: Intel Corporation Device [8086:9d71] (rev 21) (prog-if 80)
	Subsystem: Hewlett-Packard Company Device [103c:81ed]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 127
	Region 0: Memory at b1328000 (64-bit, non-prefetchable) [size=16K]
	Region 4: Memory at b1310000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel, snd_soc_skl

00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus [8086:9d23] (rev 21)
	Subsystem: Hewlett-Packard Company Sunrise Point-LP SMBus [103c:81ed]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at b1336000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 5040 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801

01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136] (rev 07)
	Subsystem: Hewlett-Packard Company RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [103c:81ed]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 122
	Region 0: I/O ports at 4000 [size=256]
	Region 2: Memory at b1200000 (64-bit, non-prefetchable) [size=4K]
	Region 4: Memory at b1000000 (64-bit, prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: r8169
	Kernel modules: r8169

02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter [10ec:b723]
	Subsystem: Hewlett-Packard Company RTL8723BE PCIe Wireless Network Adapter [103c:81c1]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: I/O ports at 3000 [size=256]
	Region 2: Memory at b1100000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: rtl8723be
	Kernel modules: rtl8723be


** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 05c8:038f Cheng Uei Precision Industry Co., Ltd (Foxlink) 
Bus 001 Device 003: ID 0bda:b008 Realtek Semiconductor Corp. 
Bus 001 Device 005: ID 03f0:3e17 Hewlett-Packard LaserJet P1006
Bus 001 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 9.3
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 4.9.0-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.9.0-5-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.130
ii  kmod                                    23-2
ii  linux-base                              4.5

Versions of packages linux-image-4.9.0-5-amd64 recommends:
ii  firmware-linux-free  3.4
ii  irqbalance           1.1.0-2.3

Versions of packages linux-image-4.9.0-5-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-efi-amd64          2.02~beta3-5
pn  linux-doc-4.9           <none>

Versions of packages linux-image-4.9.0-5-amd64 is related to:
pn  firmware-amd-graphics     <none>
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
pn  firmware-misc-nonfree     <none>
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
ii  firmware-realtek          20161130-3
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

--- End Message ---

--- Begin Message ---

To: Diamantis Karagkiaouris <diamantis.karagkiaouris.dev@gmail.com>

Cc: 886554-done@bugs.debian.org

Subject: Re: Bug#886554: linux-image-4.9.0-5-amd64: OOcannot connect into a wifi network

From: Yves-Alexis Perez <corsac@debian.org>

Date: Mon, 08 Jan 2018 20:19:04 +0100

Message-id: <1515439144.3305.67.camel@debian.org>

In-reply-to: <[🔎] A4D0559B-1644-4EAF-88F5-2BCF52735CB6@gmail.com>

References: <[🔎] 151534211156.1662.8798132961492862887.reportbug@diamvw> <[🔎] 1515417817.3305.52.camel@debian.org> <[🔎] A4D0559B-1644-4EAF-88F5-2BCF52735CB6@gmail.com>
On Mon, 2018-01-08 at 21:06 +0200, Diamantis Karagkiaouris wrote:
> It was something wrong with my router. After upgrading kernel I couldn’t
> connect , but after resetting also my router then it works as expected. So
> it invalid right now

Thanks for the feedback, I'm closing the bug then.

Regards,
-- 
Yves-Alexis
Attachment: signature.asc
Description: This is a digitally signed message part

--- End Message ---

Reply to:

References:
- Bug#886554: linux-image-4.9.0-5-amd64: OOcannot connect into a wifi network
  - From: Karagkiaouris Diamantis <diamantis.karagkiaouris.dev@gmail.com>

Prev by Date: Processed: Re: iwlwifi: wifi failure to work after suspend with 7260AC
Next by Date: Bug#885570: linux-image-4.9.0-5-amd64
Previous by thread: Bug#886554: linux-image-4.9.0-5-amd64: OOcannot connect into a wifi network
Next by thread: Bug#886556: linux-image-4.15.0-rc5-amd64: NULL pointer dereference in ecc_gen_privkey [ecdh_generic] at boot
Index(es):
- Date
- Thread