Your message dated Sun, 24 Sep 2017 23:45:07 +0100 with message-id <1506293107.2852.44.camel@decadent.org.uk> and subject line Re: Bug#852975: dvb_usb_dw2102 uses stack for USB buffers has caused the Debian Bug report #852975, regarding dvb_usb_dw2102 uses stack for USB buffers to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 852975: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=852975 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: Geniatech T220 DVB-T2 TV Stick stopped working with kernel 4.9
- From: Philip Rinn <rinni@inventati.org>
- Date: Sat, 28 Jan 2017 17:09:38 +0100
- Message-id: <99f2bd0b-5491-4815-7303-c9fc4f6e5143@inventati.org>
Package: linux-image-4.9.0-1-amd64 Version: 4.9.2-2 Hi, [I tried to send this report with reportbug but it crashed constantly :(] starting with kernel 4.9 the Geniatech T220 DVB-T2 TV Stick stopped working for me. With kernel 4.8 everything works fine. I attached logs from both kernels and the output of lsusb -vvv If you need more information please ask. Best, Philip[ 0.000000] microcode: microcode updated early to revision 0x1c, date = 2015-02-26 [ 0.000000] Linux version 4.8.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.1 20161202 (Debian 5.4.1-4) ) #1 SMP Debian 4.8.15-2 (2017-01-04) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.8.0-2-amd64 root=/dev/mapper/debian-root ro quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d9e25fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d9e26000-0x00000000da2a5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da2a6000-0x00000000da2b5fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000da2b6000-0x00000000da3c0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da3c1000-0x00000000da696fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da697000-0x00000000da697fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da698000-0x00000000da6dafff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da6db000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: /DH77EB, BIOS EBH7710H.86A.0101.2013.0516.1649 05/16/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x41f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask C00000000 write-back [ 0.000000] 1 base 400000000 mask FE0000000 write-back [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0DB800000 mask FFF800000 uncachable [ 0.000000] 5 base 41F800000 mask FFF800000 uncachable [ 0.000000] 6 base 41F600000 mask FFFE00000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd6e0-0x000fd6ef] mapped at [ffff8babc00fd6e0] [ 0.000000] Base memory trampoline at [ffff8babc0097000] 97000 size 24576 [ 0.000000] BRK [0xacd3f000, 0xacd3ffff] PGTABLE [ 0.000000] BRK [0xacd40000, 0xacd40fff] PGTABLE [ 0.000000] BRK [0xacd41000, 0xacd41fff] PGTABLE [ 0.000000] BRK [0xacd42000, 0xacd42fff] PGTABLE [ 0.000000] BRK [0xacd43000, 0xacd43fff] PGTABLE [ 0.000000] BRK [0xacd44000, 0xacd44fff] PGTABLE [ 0.000000] BRK [0xacd45000, 0xacd45fff] PGTABLE [ 0.000000] BRK [0xacd46000, 0xacd46fff] PGTABLE [ 0.000000] BRK [0xacd47000, 0xacd47fff] PGTABLE [ 0.000000] BRK [0xacd48000, 0xacd48fff] PGTABLE [ 0.000000] BRK [0xacd49000, 0xacd49fff] PGTABLE [ 0.000000] BRK [0xacd4a000, 0xacd4afff] PGTABLE [ 0.000000] RAMDISK: [mem 0x357a3000-0x36bc8fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 0x00000000DA2AA078 00006C (v01 INTEL DH77EB 00000065 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DA2B4160 00010C (v05 INTEL DH77EB 00000065 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DA2AA170 009FE9 (v02 INTEL DH77EB 00000101 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000DA3BF080 000040 [ 0.000000] ACPI: APIC 0x00000000DA2B4270 000072 (v03 INTEL DH77EB 00000065 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DA2B42E8 000044 (v01 INTEL DH77EB 00000065 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000DA2B4330 00003C (v01 INTEL DH77EB 00000065 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DA2B4370 000038 (v01 INTEL DH77EB 00000065 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DA2B43A8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT 0x00000000DA2B4718 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000DA2B50C8 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: DMAR 0x00000000DA2B5B60 0000B8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f5fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x41f5f0000-0x41f5f4fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000041f5fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff] [ 0.000000] node 0: [mem 0x0000000040005000-0x00000000d9e25fff] [ 0.000000] node 0: [mem 0x00000000da697000-0x00000000da697fff] [ 0.000000] node 0: [mem 0x00000000da6db000-0x00000000daffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000041f5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f5fffff] [ 0.000000] On node 0 totalpages: 4168423 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13910 pages used for memmap [ 0.000000] DMA32 zone: 890187 pages, LIFO batch:31 [ 0.000000] Normal zone: 51160 pages used for memmap [ 0.000000] Normal zone: 3274240 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000dba00000-0x00000000df9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd9e26000-0xda2a5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xda2a6000-0xda2b5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xda2b6000-0xda3c0fff] [ 0.000000] PM: Registered nosave memory: [mem 0xda3c1000-0xda696fff] [ 0.000000] PM: Registered nosave memory: [mem 0xda698000-0xda6dafff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 35 pages/cpu @ffff8bafdf200000 s103384 r8192 d31784 u524288 [ 0.000000] pcpu-alloc: s103384 r8192 d31784 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4103268 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.8.0-2-amd64 root=/dev/mapper/debian-root ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16310292K/16673692K available (6070K kernel code, 1124K rwdata, 2808K rodata, 1360K init, 800K bss, 363400K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:33024 nr_irqs:456 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3200.190 MHz processor [ 0.000020] Calibrating delay loop (skipped), value calculated using timer frequency.. 6400.38 BogoMIPS (lpj=12800760) [ 0.000022] pid_max: default: 32768 minimum: 301 [ 0.000032] ACPI: Core revision 20160422 [ 0.005304] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.005336] Security Framework initialized [ 0.005337] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.005341] AppArmor: AppArmor disabled by boot time parameter [ 0.005917] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.008905] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.010284] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.010296] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.010524] CPU: Physical Processor ID: 0 [ 0.010525] CPU: Processor Core ID: 0 [ 0.010528] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.010528] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.010531] mce: CPU supports 9 MCE banks [ 0.010537] CPU0: Thermal monitoring enabled (TM1) [ 0.010546] process: using mwait in idle threads [ 0.010548] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.010548] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.010884] Freeing SMP alternatives memory: 24K (ffffffffbde6f000 - ffffffffbde75000) [ 0.013444] ftrace: allocating 24736 entries in 97 pages [ 0.022219] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.022220] smpboot: Max logical packages: 1 [ 0.022223] DMAR: Host address width 36 [ 0.022223] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.022230] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.022230] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.022233] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.022234] DMAR: RMRR base: 0x000000da23c000 end: 0x000000da249fff [ 0.022235] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff [ 0.022236] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.022237] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.022238] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.022463] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.022464] x2apic enabled [ 0.022469] Switched APIC routing to cluster x2apic. [ 0.022913] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.062602] TSC deadline timer enabled [ 0.062604] smpboot: CPU0: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.062607] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.062626] ... version: 3 [ 0.062627] ... bit width: 48 [ 0.062627] ... generic registers: 8 [ 0.062628] ... value mask: 0000ffffffffffff [ 0.062628] ... max period: 00007fffffffffff [ 0.062628] ... fixed-purpose events: 3 [ 0.062629] ... event mask: 00000007000000ff [ 0.063032] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.063105] x86: Booting SMP configuration: [ 0.063106] .... node #0, CPUs: #1 #2 #3 [ 0.304708] x86: Booted up 1 node, 4 CPUs [ 0.304710] smpboot: Total of 4 processors activated (25604.42 BogoMIPS) [ 0.307289] devtmpfs: initialized [ 0.307340] x86/mm: Memory block size: 128MB [ 0.309986] PM: Registering ACPI NVS region [mem 0xda2b6000-0xda3c0fff] (1093632 bytes) [ 0.310011] PM: Registering ACPI NVS region [mem 0xda698000-0xda6dafff] (274432 bytes) [ 0.310055] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.310080] pinctrl core: initialized pinctrl subsystem [ 0.310162] NET: Registered protocol family 16 [ 0.318962] cpuidle: using governor ladder [ 0.334965] cpuidle: using governor menu [ 0.334994] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.334996] ACPI: bus type PCI registered [ 0.334997] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.335062] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.335063] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.335069] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 0.335127] PCI: Using configuration type 1 for base access [ 0.335199] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.335229] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.348810] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.348972] ACPI: Added _OSI(Module Device) [ 0.348973] ACPI: Added _OSI(Processor Device) [ 0.348973] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.348974] ACPI: Added _OSI(Processor Aggregator Device) [ 0.349139] ACPI: Executed 1 blocks of module-level executable AML code [ 0.352098] ACPI: Dynamic OEM Table Load: [ 0.352103] ACPI: SSDT 0xFFFF8BAFCC51F000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.352474] ACPI: Dynamic OEM Table Load: [ 0.352476] ACPI: SSDT 0xFFFF8BAFCC53C400 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.352796] ACPI: Dynamic OEM Table Load: [ 0.352798] ACPI: SSDT 0xFFFF8BAFCCB42800 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.353643] ACPI: Interpreter enabled [ 0.353657] ACPI: (supports S0 S3 S4 S5) [ 0.353657] ACPI: Using IOAPIC for interrupt routing [ 0.353676] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.359109] ACPI: Power Resource [FN00] (off) [ 0.359174] ACPI: Power Resource [FN01] (off) [ 0.359237] ACPI: Power Resource [FN02] (off) [ 0.359298] ACPI: Power Resource [FN03] (off) [ 0.359360] ACPI: Power Resource [FN04] (off) [ 0.359757] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.359760] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.359943] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.360045] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.360046] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.360402] PCI host bridge to bus 0000:00 [ 0.360404] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.360405] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.360406] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.360406] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.360407] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.360408] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.360409] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.360410] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.360410] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.360411] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window] [ 0.360412] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.360417] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 [ 0.360497] pci 0000:00:02.0: [8086:0152] type 00 class 0x030000 [ 0.360504] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.360508] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.360511] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.360613] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.360632] pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit] [ 0.360697] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.360738] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.360774] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.360793] pci 0000:00:16.0: reg 0x10: [mem 0xf7c3b000-0xf7c3b00f 64bit] [ 0.360863] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.360936] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000 [ 0.360950] pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff] [ 0.360957] pci 0000:00:19.0: reg 0x14: [mem 0xf7c39000-0xf7c39fff] [ 0.360965] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 0.361020] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.361057] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.361089] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.361105] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c38000-0xf7c383ff] [ 0.361183] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.361231] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.361265] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.361281] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit] [ 0.361347] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.361388] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.361423] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.361438] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c37000-0xf7c373ff] [ 0.361517] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.361566] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.361600] pci 0000:00:1f.0: [8086:1e4a] type 00 class 0x060100 [ 0.361759] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601 [ 0.361772] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.361779] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.361786] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.361793] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.361800] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.361807] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c36000-0xf7c367ff] [ 0.361844] pci 0000:00:1f.2: PME# supported from D3hot [ 0.361908] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.361922] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c35000-0xf7c350ff 64bit] [ 0.361941] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.362565] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.362609] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.362654] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.362694] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.362736] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.362782] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.362830] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.362872] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.363052] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.363119] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.363120] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.363121] vgaarb: loaded [ 0.363122] vgaarb: bridge control possible 0000:00:02.0 [ 0.363164] PCI: Using ACPI for IRQ routing [ 0.364625] PCI: pci_cache_line_size set to 64 bytes [ 0.364653] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.364654] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.364655] e820: reserve RAM buffer [mem 0xd9e26000-0xdbffffff] [ 0.364656] e820: reserve RAM buffer [mem 0xda698000-0xdbffffff] [ 0.364657] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.364657] e820: reserve RAM buffer [mem 0x41f600000-0x41fffffff] [ 0.364765] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.364768] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.366785] clocksource: Switched to clocksource hpet [ 0.371305] VFS: Disk quotas dquot_6.6.0 [ 0.371329] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.371392] pnp: PnP ACPI init [ 0.371471] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.371473] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.371532] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.371533] system 00:01: [io 0x1000-0x100f] has been reserved [ 0.371535] system 00:01: [io 0xffff] has been reserved [ 0.371536] system 00:01: [io 0xffff] has been reserved [ 0.371537] system 00:01: [io 0x0400-0x0453] has been reserved [ 0.371537] system 00:01: [io 0x0458-0x047f] has been reserved [ 0.371538] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.371539] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.371541] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.371559] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.371596] system 00:03: [io 0x0454-0x0457] has been reserved [ 0.371597] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.371653] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.371654] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.371864] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.371866] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.372080] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.372082] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.372082] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.372083] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.372085] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.372086] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.372087] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.372088] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.372089] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.372090] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.372091] system 00:06: [mem 0xdfa00000-0xdfa00fff] has been reserved [ 0.372092] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.372217] system 00:07: [mem 0x20000000-0x201fffff] has been reserved [ 0.372218] system 00:07: [mem 0x40004000-0x40004fff] has been reserved [ 0.372219] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.372232] pnp: PnP ACPI: found 8 devices [ 0.378578] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.378585] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.378585] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.378586] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.378587] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.378588] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.378589] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.378589] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.378590] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window] [ 0.378591] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window] [ 0.378592] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff window] [ 0.378637] NET: Registered protocol family 2 [ 0.378774] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.378937] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.379038] TCP: Hash tables configured (established 131072 bind 65536) [ 0.379056] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.379090] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.379141] NET: Registered protocol family 1 [ 0.379158] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling [ 0.379169] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.426884] PCI: CLS 64 bytes, default 64 [ 0.426915] Unpacking initramfs... [ 0.691304] Freeing initrd memory: 20632K (ffff8babf57a3000 - ffff8babf6bc9000) [ 0.691345] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.691347] software IO TLB [mem 0xd5e26000-0xd9e26000] (64MB) mapped at [ffff8bac95e26000-ffff8bac99e25fff] [ 0.691623] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.691649] audit: initializing netlink subsys (disabled) [ 0.691663] audit: type=2000 audit(1485513473.688:1): initialized [ 0.691888] Initialise system trusted keyrings [ 0.691968] workingset: timestamp_bits=40 max_order=22 bucket_order=0 [ 0.691975] zbud: loaded [ 0.724975] Key type asymmetric registered [ 0.724976] Asymmetric key parser 'x509' registered [ 0.724993] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.725023] io scheduler noop registered [ 0.725024] io scheduler deadline registered [ 0.725027] io scheduler cfq registered (default) [ 0.725067] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.725070] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.725080] intel_idle: MWAIT substates: 0x1120 [ 0.725081] intel_idle: v0.4.1 model 0x3A [ 0.725188] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.725279] GHES: HEST is not enabled! [ 0.725316] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.725657] Linux agpgart interface v0.103 [ 0.725685] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> [ 0.725685] AMD IOMMUv2 functionality not available on this system [ 0.725933] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.822873] i8042: No controller found [ 1.822891] tsc: Refined TSC clocksource calibration: 3200.021 MHz [ 1.822895] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e205d6fcb8, max_idle_ns: 440795212339 ns [ 1.823020] mousedev: PS/2 mouse device common for all mice [ 1.823053] rtc_cmos 00:02: RTC can wake from S4 [ 1.823179] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.823213] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.823220] intel_pstate: Intel P-state driver initializing [ 1.823494] ledtrig-cpu: registered to indicate activity on CPUs [ 1.824115] NET: Registered protocol family 10 [ 1.824456] mip6: Mobile IPv6 [ 1.824458] NET: Registered protocol family 17 [ 1.824461] mpls_gso: MPLS GSO support [ 1.824738] microcode: sig=0x306a9, pf=0x2, revision=0x1c [ 1.824865] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 1.825027] registered taskstats version 1 [ 1.825028] Loading compiled-in X.509 certificates [ 1.827226] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256)) [ 1.827682] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630' [ 1.827705] zswap: loaded using pool lzo/zbud [ 1.828302] rtc_cmos 00:02: setting system clock to 2017-01-27 10:37:55 UTC (1485513475) [ 1.828406] PM: Hibernation image not present or could not be loaded. [ 1.829867] Freeing unused kernel memory: 1360K (ffffffffbdd1b000 - ffffffffbde6f000) [ 1.829868] Write protecting the kernel read-only data: 10240k [ 1.830096] Freeing unused kernel memory: 60K (ffff8bac6c5f1000 - ffff8bac6c600000) [ 1.833825] Freeing unused kernel memory: 1288K (ffff8bac6c8be000 - ffff8bac6ca00000) [ 1.844275] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.918266] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.918323] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.918332] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.918341] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.919173] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.919215] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.920584] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.920655] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.920721] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.920785] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.943436] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED [ 1.950665] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.950666] ACPI: Thermal Zone [TZ00] (28 C) [ 1.950898] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.950898] ACPI: Thermal Zone [TZ01] (30 C) [ 1.951375] pps_core: LinuxPPS API ver. 1 registered [ 1.951376] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.951953] PTP clock support registered [ 1.955032] ACPI: bus type USB registered [ 1.955052] usbcore: registered new interface driver usbfs [ 1.955059] usbcore: registered new interface driver hub [ 1.955090] usbcore: registered new device driver usb [ 1.956260] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.956461] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.956899] ehci-pci: EHCI PCI platform driver [ 1.957459] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.957464] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.957478] ehci-pci 0000:00:1a.0: debug port 2 [ 1.958192] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.958193] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.958815] SCSI subsystem initialized [ 1.961393] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.961404] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c38000 [ 1.968763] AVX version of gcm_enc/dec engaged. [ 1.968764] AES CTR mode by8 optimization enabled [ 1.970809] libata version 3.00 loaded. [ 1.974769] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.974803] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.974804] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.974805] usb usb1: Product: EHCI Host Controller [ 1.974805] usb usb1: Manufacturer: Linux 4.8.0-2-amd64 ehci_hcd [ 1.974806] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.974929] hub 1-0:1.0: USB hub found [ 1.974934] hub 1-0:1.0: 2 ports detected [ 1.975178] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.975182] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.975196] ehci-pci 0000:00:1d.0: debug port 2 [ 1.979090] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.979110] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c37000 [ 1.998737] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.999033] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.999035] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.999035] usb usb2: Product: EHCI Host Controller [ 1.999036] usb usb2: Manufacturer: Linux 4.8.0-2-amd64 ehci_hcd [ 1.999037] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.999365] hub 2-0:1.0: USB hub found [ 1.999401] hub 2-0:1.0: 2 ports detected [ 1.999881] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.148570] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 2.277838] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:9b:11:f6 [ 2.277840] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.277900] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 2.278039] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.278044] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 2.279145] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930 [ 2.279151] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.279468] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.279471] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.279472] usb usb3: Product: xHCI Host Controller [ 2.279473] usb usb3: Manufacturer: Linux 4.8.0-2-amd64 xhci-hcd [ 2.279474] usb usb3: SerialNumber: 0000:00:14.0 [ 2.279807] hub 3-0:1.0: USB hub found [ 2.279859] hub 3-0:1.0: 4 ports detected [ 2.280592] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.280597] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 2.281044] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.281055] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.281057] usb usb4: Product: xHCI Host Controller [ 2.281058] usb usb4: Manufacturer: Linux 4.8.0-2-amd64 xhci-hcd [ 2.281060] usb usb4: SerialNumber: 0000:00:14.0 [ 2.281344] hub 4-0:1.0: USB hub found [ 2.281358] hub 4-0:1.0: 4 ports detected [ 2.281907] ahci 0000:00:1f.2: version 3.0 [ 2.282118] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 2.292247] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x27 impl SATA mode [ 2.292250] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 2.302727] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.326717] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.327689] scsi host0: ahci [ 2.328041] scsi host1: ahci [ 2.328315] scsi host2: ahci [ 2.328557] scsi host3: ahci [ 2.328811] scsi host4: ahci [ 2.328993] scsi host5: ahci [ 2.329072] ata1: SATA max UDMA/133 abar m2048@0xf7c36000 port 0xf7c36100 irq 28 [ 2.329074] ata2: SATA max UDMA/133 abar m2048@0xf7c36000 port 0xf7c36180 irq 28 [ 2.329076] ata3: SATA max UDMA/133 abar m2048@0xf7c36000 port 0xf7c36200 irq 28 [ 2.329077] ata4: DUMMY [ 2.329078] ata5: DUMMY [ 2.329080] ata6: SATA max UDMA/133 abar m2048@0xf7c36000 port 0xf7c36380 irq 28 [ 2.451093] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.451095] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.451463] hub 1-1:1.0: USB hub found [ 2.451543] hub 1-1:1.0: 6 ports detected [ 2.475405] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.475407] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.475765] hub 2-1:1.0: USB hub found [ 2.475959] hub 2-1:1.0: 8 ports detected [ 2.641356] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.642168] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 2.642171] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 2.642173] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 2.642587] ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133 [ 2.642590] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.643258] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 2.643261] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 2.643263] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 2.643498] ata1.00: configured for UDMA/133 [ 2.643854] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 3B1Q PQ: 0 ANSI: 5 [ 2.738720] usb 1-1.2: new high-speed USB device number 3 using ehci-pci [ 2.762690] usb 2-1.5: new low-speed USB device number 3 using ehci-pci [ 2.848335] usb 1-1.2: New USB device found, idVendor=17cc, idProduct=041d [ 2.848338] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 2.848340] usb 1-1.2: Product: Traktor Audio 2 [ 2.848341] usb 1-1.2: Manufacturer: Native Instruments [ 2.848342] usb 1-1.2: SerialNumber: SN-x9r05urg [ 2.850845] clocksource: Switched to clocksource tsc [ 2.882136] usb 2-1.5: New USB device found, idVendor=046a, idProduct=0023 [ 2.882139] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.886932] hidraw: raw HID events driver (C) Jiri Kosina [ 2.904296] usbcore: registered new interface driver usbhid [ 2.904297] usbhid: USB HID core driver [ 2.905520] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046A:0023.0001/input/input0 [ 2.926689] usb 1-1.4: new high-speed USB device number 4 using ehci-pci [ 2.962674] usb 2-1.6: new low-speed USB device number 4 using ehci-pci [ 2.962900] cherry 0003:046A:0023.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.0-1.5/input0 [ 2.965523] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:046A:0023.0002/input/input1 [ 2.989087] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.995419] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 2.995422] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 2.995424] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 3.001629] ata2.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133 [ 3.001632] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.008011] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 3.008014] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 3.008016] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 3.014198] ata2.00: configured for UDMA/133 [ 3.014441] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD204UI 0001 PQ: 0 ANSI: 5 [ 3.022818] cherry 0003:046A:0023.0002: input,hidraw1: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.0-1.5/input1 [ 3.035471] usb 1-1.4: New USB device found, idVendor=1a40, idProduct=0101 [ 3.035473] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.035475] usb 1-1.4: Product: USB 2.0 Hub [ 3.035809] hub 1-1.4:1.0: USB hub found [ 3.035882] hub 1-1.4:1.0: 4 ports detected [ 3.075347] usb 2-1.6: New USB device found, idVendor=046d, idProduct=c077 [ 3.075349] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.075351] usb 2-1.6: Product: USB Optical Mouse [ 3.075352] usb 2-1.6: Manufacturer: Logitech [ 3.079283] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:046D:C077.0003/input/input2 [ 3.079395] hid-generic 0003:046D:C077.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.6/input0 [ 3.322656] usb 1-1.4.2: new high-speed USB device number 5 using ehci-pci [ 3.361173] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.367874] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 3.367877] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 3.367879] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 3.368949] ata3.00: ATAPI: HL-DT-ST DVDRAM GH24NS95, RN00, max UDMA/133 [ 3.374846] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 3.374849] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 3.374851] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 3.376756] ata3.00: configured for UDMA/133 [ 3.383121] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NS95 RN00 PQ: 0 ANSI: 5 [ 3.395823] random: fast init done [ 3.431657] usb 1-1.4.2: New USB device found, idVendor=1f4d, idProduct=d220 [ 3.431660] usb 1-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.431661] usb 1-1.4.2: Product: USB Device [ 3.431663] usb 1-1.4.2: Manufacturer: Geniatech [ 3.431664] usb 1-1.4.2: SerialNumber: 0001 [ 3.709139] ata6: SATA link down (SStatus 0 SControl 300) [ 3.712831] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 3.712846] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.712904] sd 1:0:0:0: [sdb] Write Protect is off [ 3.712906] sd 0:0:0:0: [sda] Write Protect is off [ 3.712907] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.712910] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.712927] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.712930] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.713889] sda: sda1 sda2 [ 3.714318] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.721862] sdb: sdb1 [ 3.722321] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.735487] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.735490] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.735764] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 4.050031] device-mapper: uevent: version 1.0.3 [ 4.050126] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 8.533372] random: crng init done [ 11.509572] NET: Registered protocol family 38 [ 11.621906] PM: Starting manual resume from disk [ 11.621908] PM: Hibernation image partition 254:2 present [ 11.621909] PM: Looking for hibernation image. [ 11.622109] PM: Image not found (code -22) [ 11.622110] PM: Hibernation image not present or could not be loaded. [ 11.715983] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 11.827296] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.851200] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 11.851321] systemd[1]: Detected architecture x86-64. [ 11.852142] systemd[1]: Set hostname to <debian>. [ 11.935916] systemd[1]: Reached target Remote File Systems. [ 11.935980] systemd[1]: Reached target User and Group Name Lookups. [ 11.936012] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 11.936038] systemd[1]: Listening on Syslog Socket. [ 11.936057] systemd[1]: Listening on fsck to fsckd communication Socket. [ 11.936084] systemd[1]: Listening on udev Control Socket. [ 11.936110] systemd[1]: Listening on LVM2 metadata daemon socket. [ 11.967229] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 11.973120] lp: driver loaded but no devices found [ 11.975092] ppdev: user-space parallel port driver [ 11.988249] loop: module loaded [ 11.989521] systemd-journald[307]: Received request to flush runtime journal from PID 1 [ 11.996122] w83627ehf: Found NCT6775F chip at 0xa00 [ 12.058119] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 12.058122] ACPI: Power Button [PWRB] [ 12.058153] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 12.058154] ACPI: Power Button [PWRF] [ 12.061564] wmi: Mapper loaded [ 12.091623] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 12.091804] EDAC MC: Ver: 3.0.0 [ 12.114960] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 12.114984] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 12.114984] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 12.114985] RAPL PMU: hw unit of domain package 2^-16 Joules [ 12.114985] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 12.115268] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 12.115299] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 12.116230] EDAC ie31200: No ECC support [ 12.116577] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160422/utaddress-255) [ 12.116581] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.116583] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255) [ 12.116585] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.116585] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255) [ 12.116587] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.116587] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255) [ 12.116589] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x000000000000050F-0x000000000000050F (\_SB.PCI0.RLED.DBG0) (20160422/utaddress-255) [ 12.116591] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.116591] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 12.125153] [drm] Initialized drm 1.1.0 20060810 [ 12.125202] dw2102: su3000_identify_state [ 12.125203] dvb-usb: found a 'Geniatech T220 DVB-T/T2 USB2.0' in warm state. [ 12.125204] dw2102: su3000_power_ctrl: 1, initialized 0 [ 12.126194] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 12.126591] DVB: registering new adapter (Geniatech T220 DVB-T/T2 USB2.0) [ 12.137718] dvb-usb: MAC address: ff:ff:ff:ff:ff:ff [ 12.147336] usbcore: registered new interface driver snd-usb-caiaq [ 12.165055] [drm] Memory usable by graphics device = 2048M [ 12.165056] [drm] Replacing VGA console driver [ 12.165193] intel_rapl: Found RAPL domain package [ 12.165194] intel_rapl: Found RAPL domain core [ 12.165195] intel_rapl: Found RAPL domain uncore [ 12.165532] Console: switching to colour dummy device 80x25 [ 12.171775] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 12.171775] [drm] Driver supports precise vblank timestamp query. [ 12.174069] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 12.179252] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 12.179432] acpi device:49: registered as cooling_device10 [ 12.179481] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 12.180350] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0 [ 12.206385] iTCO_vendor_support: vendor-support=0 [ 12.207376] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 12.207406] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460) [ 12.207577] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 12.212655] tda18271 1-0060: creating new instance [ 12.217587] TDA18271HD/C2 detected @ 1-0060 [ 12.221629] Adding 3903484k swap on /dev/mapper/debian-swap. Priority:-1 extents:1 across:3903484k SSDscFS [ 12.230360] fbcon: inteldrmfb (fb0) is primary device [ 12.245070] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 12.247872] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 12.288907] Console: switching to colour frame buffer device 240x75 [ 12.308905] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 12.508082] dw2102: Attached TDA18271HD/CXD2820R! [ 12.508086] usb 1-1.4.2: DVB: registering adapter 0 frontend 0 (Sony CXD2820R)... [ 12.538159] Registered IR keymap rc-su3000 [ 12.538239] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.2/rc/rc0/input8 [ 12.538701] rc rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.2/rc/rc0 [ 12.538702] dvb-usb: schedule remote query interval to 150 msecs. [ 12.538703] dw2102: su3000_power_ctrl: 0, initialized 1 [ 12.538704] dvb-usb: Geniatech T220 DVB-T/T2 USB2.0 successfully initialized and connected. [ 12.538725] usbcore: registered new interface driver dw2102 [ 12.995170] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 13.563354] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.830248] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.627932] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 16.627972] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 16.957159] systemd[1]: apt-daily.timer: Adding 8h 30min 54.954978s random time. [ 17.046292] systemd[1]: apt-daily.timer: Adding 8h 50min 501.648ms random time. [ 22.035823] input: lircd-uinput as /devices/virtual/input/input9 [ 22.376156] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 22.388048] Ebtables v2.0 registered [ 22.591121] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 22.595962] tun: Universal TUN/TAP device driver, 1.6 [ 22.595963] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 22.645700] virbr0: port 1(virbr0-nic) entered blocking state [ 22.645701] virbr0: port 1(virbr0-nic) entered disabled state [ 22.645784] device virbr0-nic entered promiscuous mode [ 22.770072] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 22.788820] virbr0: port 1(virbr0-nic) entered blocking state [ 22.788822] virbr0: port 1(virbr0-nic) entered listening state [ 22.830098] virbr0: port 1(virbr0-nic) entered disabled state [ 22.887853] systemd[1]: apt-daily.timer: Adding 11h 24min 59.661268s random time. [ 22.965285] systemd[1]: apt-daily.timer: Adding 1h 55min 16.705238s random time. [ 30.579980] fuse init (API version 7.25) [ 39.676284] dw2102: su3000_power_ctrl: 1, initialized 1 [ 39.979337] tda18271: performing RF tracking filter calibration [ 42.721277] tda18271: RF tracking filter calibration complete [ 47.290516] dw2102: su3000_power_ctrl: 0, initialized 1[ 0.000000] microcode: microcode updated early to revision 0x1c, date = 2015-02-26 [ 0.000000] Linux version 4.9.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20161229 (Debian 6.3.0-2) ) #1 SMP Debian 4.9.2-2 (2017-01-12) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-1-amd64 root=/dev/mapper/debian-root ro quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d9e25fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d9e26000-0x00000000da2a5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da2a6000-0x00000000da2b5fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000da2b6000-0x00000000da3c0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da3c1000-0x00000000da696fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da697000-0x00000000da697fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da698000-0x00000000da6dafff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da6db000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: /DH77EB, BIOS EBH7710H.86A.0101.2013.0516.1649 05/16/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x41f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask C00000000 write-back [ 0.000000] 1 base 400000000 mask FE0000000 write-back [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0DB800000 mask FFF800000 uncachable [ 0.000000] 5 base 41F800000 mask FFF800000 uncachable [ 0.000000] 6 base 41F600000 mask FFFE00000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd6e0-0x000fd6ef] mapped at [ffff9cbb800fd6e0] [ 0.000000] Base memory trampoline at [ffff9cbb80097000] 97000 size 24576 [ 0.000000] BRK [0x24a74c000, 0x24a74cfff] PGTABLE [ 0.000000] BRK [0x24a74d000, 0x24a74dfff] PGTABLE [ 0.000000] BRK [0x24a74e000, 0x24a74efff] PGTABLE [ 0.000000] BRK [0x24a74f000, 0x24a74ffff] PGTABLE [ 0.000000] BRK [0x24a750000, 0x24a750fff] PGTABLE [ 0.000000] BRK [0x24a751000, 0x24a751fff] PGTABLE [ 0.000000] BRK [0x24a752000, 0x24a752fff] PGTABLE [ 0.000000] BRK [0x24a753000, 0x24a753fff] PGTABLE [ 0.000000] BRK [0x24a754000, 0x24a754fff] PGTABLE [ 0.000000] BRK [0x24a755000, 0x24a755fff] PGTABLE [ 0.000000] BRK [0x24a756000, 0x24a756fff] PGTABLE [ 0.000000] BRK [0x24a757000, 0x24a757fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x356bb000-0x36b54fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 0x00000000DA2AA078 00006C (v01 INTEL DH77EB 00000065 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DA2B4160 00010C (v05 INTEL DH77EB 00000065 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DA2AA170 009FE9 (v02 INTEL DH77EB 00000101 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000DA3BF080 000040 [ 0.000000] ACPI: APIC 0x00000000DA2B4270 000072 (v03 INTEL DH77EB 00000065 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DA2B42E8 000044 (v01 INTEL DH77EB 00000065 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000DA2B4330 00003C (v01 INTEL DH77EB 00000065 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DA2B4370 000038 (v01 INTEL DH77EB 00000065 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DA2B43A8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT 0x00000000DA2B4718 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000DA2B50C8 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: DMAR 0x00000000DA2B5B60 0000B8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f5fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x41f5f0000-0x41f5f4fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000041f5fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff] [ 0.000000] node 0: [mem 0x0000000040005000-0x00000000d9e25fff] [ 0.000000] node 0: [mem 0x00000000da697000-0x00000000da697fff] [ 0.000000] node 0: [mem 0x00000000da6db000-0x00000000daffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000041f5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f5fffff] [ 0.000000] On node 0 totalpages: 4168423 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13910 pages used for memmap [ 0.000000] DMA32 zone: 890187 pages, LIFO batch:31 [ 0.000000] Normal zone: 51160 pages used for memmap [ 0.000000] Normal zone: 3274240 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000dba00000-0x00000000df9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd9e26000-0xda2a5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xda2a6000-0xda2b5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xda2b6000-0xda3c0fff] [ 0.000000] PM: Registered nosave memory: [mem 0xda3c1000-0xda696fff] [ 0.000000] PM: Registered nosave memory: [mem 0xda698000-0xda6dafff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 35 pages/cpu @ffff9cbf9f200000 s103768 r8192 d31400 u524288 [ 0.000000] pcpu-alloc: s103768 r8192 d31400 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4103268 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-1-amd64 root=/dev/mapper/debian-root ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16308012K/16673692K available (6138K kernel code, 1134K rwdata, 2840K rodata, 1392K init, 812K bss, 365680K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:33024 nr_irqs:456 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3200.016 MHz processor [ 0.000020] Calibrating delay loop (skipped), value calculated using timer frequency.. 6400.03 BogoMIPS (lpj=12800064) [ 0.000021] pid_max: default: 32768 minimum: 301 [ 0.000032] ACPI: Core revision 20160831 [ 0.004652] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.004686] Security Framework initialized [ 0.004687] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.004691] AppArmor: AppArmor disabled by boot time parameter [ 0.005302] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.008313] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.009695] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.009705] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.009936] CPU: Physical Processor ID: 0 [ 0.009937] CPU: Processor Core ID: 0 [ 0.009940] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.009940] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.009943] mce: CPU supports 9 MCE banks [ 0.009950] CPU0: Thermal monitoring enabled (TM1) [ 0.009960] process: using mwait in idle threads [ 0.009962] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.009962] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.010294] Freeing SMP alternatives memory: 24K (ffffffff8c479000 - ffffffff8c47f000) [ 0.012868] ftrace: allocating 24972 entries in 98 pages [ 0.021626] smpboot: Max logical packages: 1 [ 0.021629] DMAR: Host address width 36 [ 0.021630] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.021636] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.021637] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.021640] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.021640] DMAR: RMRR base: 0x000000da23c000 end: 0x000000da249fff [ 0.021641] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff [ 0.021642] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.021643] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.021643] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.021869] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.021870] x2apic enabled [ 0.021874] Switched APIC routing to cluster x2apic. [ 0.022316] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.062004] TSC deadline timer enabled [ 0.062007] smpboot: CPU0: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.062009] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.062029] ... version: 3 [ 0.062030] ... bit width: 48 [ 0.062030] ... generic registers: 8 [ 0.062030] ... value mask: 0000ffffffffffff [ 0.062031] ... max period: 00007fffffffffff [ 0.062031] ... fixed-purpose events: 3 [ 0.062031] ... event mask: 00000007000000ff [ 0.062445] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.062525] x86: Booting SMP configuration: [ 0.062526] .... node #0, CPUs: #1 #2 #3 [ 0.304109] x86: Booted up 1 node, 4 CPUs [ 0.304110] smpboot: Total of 4 processors activated (25603.06 BogoMIPS) [ 0.306648] devtmpfs: initialized [ 0.306698] x86/mm: Memory block size: 128MB [ 0.309354] PM: Registering ACPI NVS region [mem 0xda2b6000-0xda3c0fff] (1093632 bytes) [ 0.309377] PM: Registering ACPI NVS region [mem 0xda698000-0xda6dafff] (274432 bytes) [ 0.309420] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.309445] pinctrl core: initialized pinctrl subsystem [ 0.309527] NET: Registered protocol family 16 [ 0.318303] cpuidle: using governor ladder [ 0.334308] cpuidle: using governor menu [ 0.334338] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.334339] ACPI: bus type PCI registered [ 0.334340] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.334406] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.334407] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.334414] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 0.334472] PCI: Using configuration type 1 for base access [ 0.334544] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.334574] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.352221] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.352385] ACPI: Added _OSI(Module Device) [ 0.352385] ACPI: Added _OSI(Processor Device) [ 0.352386] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.352386] ACPI: Added _OSI(Processor Aggregator Device) [ 0.352553] ACPI: Executed 1 blocks of module-level executable AML code [ 0.355562] ACPI: Dynamic OEM Table Load: [ 0.355567] ACPI: SSDT 0xFFFF9CBF8C9B4000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.355825] ACPI: Dynamic OEM Table Load: [ 0.355829] ACPI: SSDT 0xFFFF9CBF8C4FB400 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.356026] ACPI: Dynamic OEM Table Load: [ 0.356029] ACPI: SSDT 0xFFFF9CBF8CAA2A00 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.356759] ACPI: Interpreter enabled [ 0.356773] ACPI: (supports S0 S3 S4 S5) [ 0.356774] ACPI: Using IOAPIC for interrupt routing [ 0.356792] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.362312] ACPI: Power Resource [FN00] (off) [ 0.362379] ACPI: Power Resource [FN01] (off) [ 0.362442] ACPI: Power Resource [FN02] (off) [ 0.362504] ACPI: Power Resource [FN03] (off) [ 0.362566] ACPI: Power Resource [FN04] (off) [ 0.362969] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.362972] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.363153] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.363256] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.363256] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.363620] PCI host bridge to bus 0000:00 [ 0.363622] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.363622] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.363623] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.363624] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.363625] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.363626] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.363626] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.363627] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.363628] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.363629] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window] [ 0.363630] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.363635] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 [ 0.363717] pci 0000:00:02.0: [8086:0152] type 00 class 0x030000 [ 0.363724] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.363728] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.363731] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.363835] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.363854] pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit] [ 0.363918] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.363960] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.363993] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.364011] pci 0000:00:16.0: reg 0x10: [mem 0xf7c3b000-0xf7c3b00f 64bit] [ 0.364081] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.364161] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000 [ 0.364175] pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff] [ 0.364182] pci 0000:00:19.0: reg 0x14: [mem 0xf7c39000-0xf7c39fff] [ 0.364189] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 0.364245] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.364285] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.364316] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.364332] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c38000-0xf7c383ff] [ 0.364410] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.364464] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.364499] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.364514] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit] [ 0.364581] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.364626] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.364660] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.364676] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c37000-0xf7c373ff] [ 0.364754] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.364809] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.364843] pci 0000:00:1f.0: [8086:1e4a] type 00 class 0x060100 [ 0.365004] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601 [ 0.365016] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.365023] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.365030] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.365037] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.365043] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.365050] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c36000-0xf7c367ff] [ 0.365087] pci 0000:00:1f.2: PME# supported from D3hot [ 0.365155] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.365168] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c35000-0xf7c350ff 64bit] [ 0.365187] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.365822] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.365862] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.365906] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.365949] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.365995] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.366037] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.366077] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.366124] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.366310] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.366400] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.366401] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.366402] vgaarb: loaded [ 0.366403] vgaarb: bridge control possible 0000:00:02.0 [ 0.366447] PCI: Using ACPI for IRQ routing [ 0.367908] PCI: pci_cache_line_size set to 64 bytes [ 0.367936] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.367937] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.367938] e820: reserve RAM buffer [mem 0xd9e26000-0xdbffffff] [ 0.367939] e820: reserve RAM buffer [mem 0xda698000-0xdbffffff] [ 0.367939] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.367940] e820: reserve RAM buffer [mem 0x41f600000-0x41fffffff] [ 0.368052] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.368056] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.370076] clocksource: Switched to clocksource hpet [ 0.374728] VFS: Disk quotas dquot_6.6.0 [ 0.374751] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.374815] pnp: PnP ACPI init [ 0.374895] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.374897] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.374957] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.374958] system 00:01: [io 0x1000-0x100f] has been reserved [ 0.374959] system 00:01: [io 0xffff] has been reserved [ 0.374960] system 00:01: [io 0xffff] has been reserved [ 0.374961] system 00:01: [io 0x0400-0x0453] has been reserved [ 0.374962] system 00:01: [io 0x0458-0x047f] has been reserved [ 0.374963] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.374964] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.374965] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.374984] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.375021] system 00:03: [io 0x0454-0x0457] has been reserved [ 0.375022] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.375079] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.375080] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.375285] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.375287] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.375504] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.375505] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.375506] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.375507] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.375508] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.375509] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.375510] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.375511] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.375512] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.375513] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.375514] system 00:06: [mem 0xdfa00000-0xdfa00fff] has been reserved [ 0.375515] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.375648] system 00:07: [mem 0x20000000-0x201fffff] has been reserved [ 0.375649] system 00:07: [mem 0x40004000-0x40004fff] has been reserved [ 0.375650] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.375663] pnp: PnP ACPI: found 8 devices [ 0.381750] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.381755] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.381756] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.381757] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.381758] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.381759] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.381760] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.381761] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.381761] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window] [ 0.381762] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window] [ 0.381763] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff window] [ 0.381850] NET: Registered protocol family 2 [ 0.381987] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.382153] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.382256] TCP: Hash tables configured (established 131072 bind 65536) [ 0.382274] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.382308] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.382359] NET: Registered protocol family 1 [ 0.382375] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling [ 0.382386] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.430183] PCI: CLS 64 bytes, default 64 [ 0.430216] Unpacking initramfs... [ 0.700680] Freeing initrd memory: 21096K (ffff9cbbb56bb000 - ffff9cbbb6b55000) [ 0.700718] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.700720] software IO TLB [mem 0xd5e26000-0xd9e26000] (64MB) mapped at [ffff9cbc55e26000-ffff9cbc59e25fff] [ 0.700992] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.701014] audit: initializing netlink subsys (disabled) [ 0.701027] audit: type=2000 audit(1485596304.696:1): initialized [ 0.701246] Initialise system trusted keyrings [ 0.701317] workingset: timestamp_bits=40 max_order=22 bucket_order=0 [ 0.701347] zbud: loaded [ 0.734167] Key type asymmetric registered [ 0.734168] Asymmetric key parser 'x509' registered [ 0.734186] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.734210] io scheduler noop registered [ 0.734210] io scheduler deadline registered [ 0.734214] io scheduler cfq registered (default) [ 0.734252] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.734256] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.734265] intel_idle: MWAIT substates: 0x1120 [ 0.734266] intel_idle: v0.4.1 model 0x3A [ 0.734371] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.734464] GHES: HEST is not enabled! [ 0.734512] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.734853] Linux agpgart interface v0.103 [ 0.734879] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> [ 0.734879] AMD IOMMUv2 functionality not available on this system [ 0.735121] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.730095] tsc: Refined TSC clocksource calibration: 3200.032 MHz [ 1.730100] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e2067d35cf, max_idle_ns: 440795215743 ns [ 1.832918] i8042: No controller found [ 1.833125] mousedev: PS/2 mouse device common for all mice [ 1.833161] rtc_cmos 00:02: RTC can wake from S4 [ 1.833337] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.833370] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.833378] intel_pstate: Intel P-state driver initializing [ 1.833688] ledtrig-cpu: registered to indicate activity on CPUs [ 1.834270] NET: Registered protocol family 10 [ 1.834611] mip6: Mobile IPv6 [ 1.834614] NET: Registered protocol family 17 [ 1.834617] mpls_gso: MPLS GSO support [ 1.834926] microcode: sig=0x306a9, pf=0x2, revision=0x1c [ 1.835052] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 1.835259] registered taskstats version 1 [ 1.835260] Loading compiled-in X.509 certificates [ 1.837341] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256)) [ 1.837767] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630' [ 1.837792] zswap: loaded using pool lzo/zbud [ 1.838201] rtc_cmos 00:02: setting system clock to 2017-01-28 09:38:26 UTC (1485596306) [ 1.838292] PM: Hibernation image not present or could not be loaded. [ 1.839926] Freeing unused kernel memory: 1392K (ffffffff8c31d000 - ffffffff8c479000) [ 1.839927] Write protecting the kernel read-only data: 12288k [ 1.840659] Freeing unused kernel memory: 2040K (ffff9cbdc9e02000 - ffff9cbdca000000) [ 1.844408] Freeing unused kernel memory: 1256K (ffff9cbdca2c6000 - ffff9cbdca400000) [ 1.852488] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.926384] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.926446] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.926455] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.926464] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.927226] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.927257] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.928182] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.928231] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.928275] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.928320] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.946966] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED [ 1.953838] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.953839] ACPI: Thermal Zone [TZ00] (28 C) [ 1.954059] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.954060] ACPI: Thermal Zone [TZ01] (30 C) [ 1.955995] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.958847] pps_core: LinuxPPS API ver. 1 registered [ 1.958847] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.958869] ACPI: bus type USB registered [ 1.958888] usbcore: registered new interface driver usbfs [ 1.958896] usbcore: registered new interface driver hub [ 1.958914] usbcore: registered new device driver usb [ 1.960865] PTP clock support registered [ 1.961189] SCSI subsystem initialized [ 1.963007] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.964189] ehci-pci: EHCI PCI platform driver [ 1.964340] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.964345] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.964360] ehci-pci 0000:00:1a.0: debug port 2 [ 1.965435] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.965435] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.965837] libata version 3.00 loaded. [ 1.968278] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.971524] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c38000 [ 1.973713] AVX version of gcm_enc/dec engaged. [ 1.973714] AES CTR mode by8 optimization enabled [ 1.986094] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.986177] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.986179] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.986180] usb usb1: Product: EHCI Host Controller [ 1.986180] usb usb1: Manufacturer: Linux 4.9.0-1-amd64 ehci_hcd [ 1.986181] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.986306] hub 1-0:1.0: USB hub found [ 1.986318] hub 1-0:1.0: 2 ports detected [ 1.986589] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.986593] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.986605] ehci-pci 0000:00:1d.0: debug port 2 [ 1.990492] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.990529] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c37000 [ 2.006118] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.006174] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.006175] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.006176] usb usb2: Product: EHCI Host Controller [ 2.006177] usb usb2: Manufacturer: Linux 4.9.0-1-amd64 ehci_hcd [ 2.006177] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.006353] hub 2-0:1.0: USB hub found [ 2.006360] hub 2-0:1.0: 2 ports detected [ 2.006643] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.155537] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 2.285436] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:9b:11:f6 [ 2.285438] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.285498] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 2.285558] ahci 0000:00:1f.2: version 3.0 [ 2.285799] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 2.295922] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x27 impl SATA mode [ 2.295925] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 2.314112] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.331036] scsi host0: ahci [ 2.331319] scsi host1: ahci [ 2.331583] scsi host2: ahci [ 2.331709] scsi host3: ahci [ 2.331822] scsi host4: ahci [ 2.331926] scsi host5: ahci [ 2.331985] ata1: SATA max UDMA/133 abar m2048@0xf7c36000 port 0xf7c36100 irq 27 [ 2.331988] ata2: SATA max UDMA/133 abar m2048@0xf7c36000 port 0xf7c36180 irq 27 [ 2.331991] ata3: SATA max UDMA/133 abar m2048@0xf7c36000 port 0xf7c36200 irq 27 [ 2.331992] ata4: DUMMY [ 2.331993] ata5: DUMMY [ 2.331995] ata6: SATA max UDMA/133 abar m2048@0xf7c36000 port 0xf7c36380 irq 27 [ 2.332149] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.332156] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 2.333254] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930 [ 2.333259] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.333599] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.333610] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.333612] usb usb3: Product: xHCI Host Controller [ 2.333613] usb usb3: Manufacturer: Linux 4.9.0-1-amd64 xhci-hcd [ 2.333615] usb usb3: SerialNumber: 0000:00:14.0 [ 2.333895] hub 3-0:1.0: USB hub found [ 2.333918] hub 3-0:1.0: 4 ports detected [ 2.334424] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.334677] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.334683] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 2.335133] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.335135] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.335137] usb usb4: Product: xHCI Host Controller [ 2.335138] usb usb4: Manufacturer: Linux 4.9.0-1-amd64 xhci-hcd [ 2.335139] usb usb4: SerialNumber: 0000:00:14.0 [ 2.335391] hub 4-0:1.0: USB hub found [ 2.335404] hub 4-0:1.0: 4 ports detected [ 2.462527] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.462529] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.462910] hub 1-1:1.0: USB hub found [ 2.462948] hub 1-1:1.0: 6 ports detected [ 2.482786] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.482788] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.483169] hub 2-1:1.0: USB hub found [ 2.483353] hub 2-1:1.0: 8 ports detected [ 2.644913] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.645719] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 2.645722] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 2.645724] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 2.646140] ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133 [ 2.646142] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.646803] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 2.646806] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 2.646808] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 2.647089] ata1.00: configured for UDMA/133 [ 2.647442] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 3B1Q PQ: 0 ANSI: 5 [ 2.750120] usb 1-1.2: new high-speed USB device number 3 using ehci-pci [ 2.754325] clocksource: Switched to clocksource tsc [ 2.770129] usb 2-1.5: new low-speed USB device number 3 using ehci-pci [ 2.859780] usb 1-1.2: New USB device found, idVendor=17cc, idProduct=041d [ 2.859782] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 2.859784] usb 1-1.2: Product: Traktor Audio 2 [ 2.859785] usb 1-1.2: Manufacturer: Native Instruments [ 2.859787] usb 1-1.2: SerialNumber: SN-x9r05urg [ 2.889296] usb 2-1.5: New USB device found, idVendor=046a, idProduct=0023 [ 2.889299] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.894057] hidraw: raw HID events driver (C) Jiri Kosina [ 2.911470] usbcore: registered new interface driver usbhid [ 2.911471] usbhid: USB HID core driver [ 2.912782] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046A:0023.0001/input/input0 [ 2.938101] usb 1-1.4: new high-speed USB device number 4 using ehci-pci [ 2.970355] cherry 0003:046A:0023.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.0-1.5/input0 [ 2.972967] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:046A:0023.0002/input/input1 [ 2.974110] usb 2-1.6: new low-speed USB device number 4 using ehci-pci [ 2.992534] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.998897] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 2.998900] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 2.998902] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 3.005104] ata2.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133 [ 3.005106] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.011540] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 3.011552] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 3.011554] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 3.017613] ata2.00: configured for UDMA/133 [ 3.017902] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD204UI 0001 PQ: 0 ANSI: 5 [ 3.030251] cherry 0003:046A:0023.0002: input,hidraw1: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.0-1.5/input1 [ 3.050797] usb 1-1.4: New USB device found, idVendor=1a40, idProduct=0101 [ 3.050799] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.050801] usb 1-1.4: Product: USB 2.0 Hub [ 3.051123] hub 1-1.4:1.0: USB hub found [ 3.051186] hub 1-1.4:1.0: 4 ports detected [ 3.091276] usb 2-1.6: New USB device found, idVendor=046d, idProduct=c077 [ 3.091278] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.091280] usb 2-1.6: Product: USB Optical Mouse [ 3.091281] usb 2-1.6: Manufacturer: Logitech [ 3.095318] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:046D:C077.0003/input/input2 [ 3.095423] hid-generic 0003:046D:C077.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.6/input0 [ 3.372605] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.376247] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 3.376250] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 3.376252] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 3.377310] ata3.00: ATAPI: HL-DT-ST DVDRAM GH24NS95, RN00, max UDMA/133 [ 3.383002] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 3.383014] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 3.383016] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 3.384177] ata3.00: configured for UDMA/133 [ 3.390270] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NS95 RN00 PQ: 0 ANSI: 5 [ 3.720634] ata6: SATA link down (SStatus 0 SControl 300) [ 3.724323] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 3.724534] sd 0:0:0:0: [sda] Write Protect is off [ 3.724537] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.724556] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.724676] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.724727] sd 1:0:0:0: [sdb] Write Protect is off [ 3.724729] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.724755] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.725295] sda: sda1 sda2 [ 3.725745] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.726787] sdb: sdb1 [ 3.727104] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.733801] random: fast init done [ 3.749321] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.749323] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.749557] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 4.053984] device-mapper: uevent: version 1.0.3 [ 4.054055] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 10.961839] random: crng init done [ 16.992639] NET: Registered protocol family 38 [ 17.114633] PM: Starting manual resume from disk [ 17.114636] PM: Hibernation image partition 254:2 present [ 17.114636] PM: Looking for hibernation image. [ 17.114861] PM: Image not found (code -22) [ 17.114861] PM: Hibernation image not present or could not be loaded. [ 17.274723] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 17.392371] ip_tables: (C) 2000-2006 Netfilter Core Team [ 17.400029] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 17.400147] systemd[1]: Detected architecture x86-64. [ 17.401052] systemd[1]: Set hostname to <debian>. [ 17.486847] systemd[1]: Listening on fsck to fsckd communication Socket. [ 17.486932] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 17.486966] systemd[1]: Listening on Journal Socket (/dev/log). [ 17.486979] systemd[1]: Reached target Remote File Systems. [ 17.487001] systemd[1]: Listening on udev Kernel Socket. [ 17.487012] systemd[1]: Reached target Libvirt guests shutdown. [ 17.487040] systemd[1]: Listening on udev Control Socket. [ 17.502651] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 17.505835] lp: driver loaded but no devices found [ 17.508286] ppdev: user-space parallel port driver [ 17.516320] loop: module loaded [ 17.524285] w83627ehf: Found NCT6775F chip at 0xa00 [ 17.528030] systemd-journald[301]: Received request to flush runtime journal from PID 1 [ 17.592953] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 17.592956] ACPI: Power Button [PWRB] [ 17.592990] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 17.592992] ACPI: Power Button [PWRF] [ 17.596624] wmi: Mapper loaded [ 17.642321] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 17.642659] EDAC MC: Ver: 3.0.0 [ 17.643715] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 17.643904] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 17.644609] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247) [ 17.644612] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.644614] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247) [ 17.644616] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.644617] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247) [ 17.644619] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.644619] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247) [ 17.644621] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x000000000000050F-0x000000000000050F (\_SB.PCI0.RLED.DBG0) (20160831/utaddress-247) [ 17.644623] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.644623] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 17.644709] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 17.644710] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 17.644710] RAPL PMU: hw unit of domain package 2^-16 Joules [ 17.644710] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 17.644792] EDAC ie31200: No ECC support [ 17.644843] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 17.653915] [drm] Initialized [ 17.684619] usbcore: registered new interface driver snd-usb-caiaq [ 17.691722] [drm] Memory usable by graphics device = 2048M [ 17.691724] [drm] Replacing VGA console driver [ 17.693671] Console: switching to colour dummy device 80x25 [ 17.704203] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 17.704204] [drm] Driver supports precise vblank timestamp query. [ 17.706404] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 17.709507] intel_rapl: Found RAPL domain package [ 17.709508] intel_rapl: Found RAPL domain core [ 17.709509] intel_rapl: Found RAPL domain uncore [ 17.720460] iTCO_vendor_support: vendor-support=0 [ 17.721696] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 17.721726] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460) [ 17.722174] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 17.730623] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 17.730796] acpi device:49: registered as cooling_device10 [ 17.730847] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 17.730887] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0 [ 17.737636] fbcon: inteldrmfb (fb0) is primary device [ 17.798126] Console: switching to colour frame buffer device 240x75 [ 17.818194] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 18.265113] Adding 3903484k swap on /dev/mapper/debian-swap. Priority:-1 extents:1 across:3903484k SSDscFS [ 18.313638] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 18.320290] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 18.530074] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 18.976294] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.242362] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.184248] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 22.184286] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 22.864259] systemd[1]: apt-daily.timer: Adding 11h 5min 55.055527s random time. [ 22.954079] systemd[1]: apt-daily.timer: Adding 3h 13min 22.942100s random time. [ 27.025962] input: lircd-uinput as /devices/virtual/input/input8 [ 27.329141] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 27.339803] Ebtables v2.0 registered [ 27.559599] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 27.563973] tun: Universal TUN/TAP device driver, 1.6 [ 27.563974] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 27.638296] virbr0: port 1(virbr0-nic) entered blocking state [ 27.638297] virbr0: port 1(virbr0-nic) entered disabled state [ 27.638363] device virbr0-nic entered promiscuous mode [ 27.820787] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 27.866641] virbr0: port 1(virbr0-nic) entered blocking state [ 27.866643] virbr0: port 1(virbr0-nic) entered listening state [ 27.927755] virbr0: port 1(virbr0-nic) entered disabled state [ 28.005191] systemd[1]: apt-daily.timer: Adding 11h 28min 40.906941s random time. [ 28.093431] systemd[1]: apt-daily.timer: Adding 8h 46min 4.712036s random time. [ 37.889140] fuse init (API version 7.26) [ 259.073651] systemd[1]: apt-daily.timer: Adding 11h 43min 42.665749s random time. [ 259.396610] systemd[1]: apt-daily.timer: Adding 5h 25min 15.214410s random time. [ 260.099855] systemd[1]: apt-daily.timer: Adding 4h 1min 11.347595s random time. [ 260.690217] systemd[1]: apt-daily.timer: Adding 2h 22min 44.357567s random time. [ 261.281368] systemd[1]: apt-daily.timer: Adding 5h 40min 33.331814s random time. [ 262.206274] systemd[1]: apt-daily.timer: Adding 9h 23min 13.938721s random time. [ 266.925528] systemd[1]: apt-daily.timer: Adding 4h 53min 25.467434s random time. [ 273.139470] systemd[1]: apt-daily.timer: Adding 7h 23min 24.627883s random time. [13557.329760] perf: interrupt took too long (2575 > 2500), lowering kernel.perf_event_max_sample_rate to 77500 [19656.913250] perf: interrupt took too long (3283 > 3218), lowering kernel.perf_event_max_sample_rate to 60750 [22121.787316] usb 2-1.7: new high-speed USB device number 5 using ehci-pci [22121.900602] usb 2-1.7: New USB device found, idVendor=1f4d, idProduct=d220 [22121.900605] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [22121.900607] usb 2-1.7: Product: USB Device [22121.900617] usb 2-1.7: Manufacturer: Geniatech [22121.900619] usb 2-1.7: SerialNumber: 0001 [22121.919324] dw2102: su3000_identify_state [22121.919325] dvb-usb: found a 'Geniatech T220 DVB-T/T2 USB2.0' in warm state. [22121.919330] dw2102: su3000_power_ctrl: 1, initialized 0 [22121.919332] ------------[ cut here ]------------ [22121.919346] WARNING: CPU: 1 PID: 15518 at /build/linux-fgnWKv/linux-4.9.2/drivers/usb/core/hcd.c:1584 usb_hcd_map_urb_for_dma+0x37c/0x570 [usbcore] [22121.919346] transfer buffer not dma capable [22121.919347] Modules linked in: dvb_usb_dw2102(+) dvb_usb dvb_core usblp fuse xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables uinput iptable_filter xt_owner cpufreq_conservative cpufreq_powersave cpufreq_userspace binfmt_misc iTCO_wdt iTCO_vendor_support intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel i915 kvm snd_usb_caiaq irqbypass snd_rawmidi drm_kms_helper intel_cstate snd_seq_device snd_pcm snd_timer drm intel_uncore snd mei_me ie31200_edac lpc_ich soundcore evdev joydev sg mei intel_rapl_perf i2c_algo_bit mfd_core edac_core pcspkr battery nuvoton_cir rc_core wmi video button [22121.919381] tpm_tis tpm_tis_core tpm w83627ehf hwmon_vid lm75 coretemp loop parport_pc ppdev lp parport ip_tables x_tables autofs4 ext4 crc16 jbd2 crc32c_generic fscrypto ecb mbcache algif_skcipher af_alg dm_crypt dm_mod sr_mod cdrom sd_mod hid_generic hid_cherry usbhid hid crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel xhci_pci xhci_hcd ahci libahci e1000e libata ehci_pci aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd ptp scsi_mod ehci_hcd pps_core usbcore i2c_i801 i2c_smbus usb_common fan thermal fjes [22121.919412] CPU: 1 PID: 15518 Comm: systemd-udevd Not tainted 4.9.0-1-amd64 #1 Debian 4.9.2-2 [22121.919413] Hardware name: /DH77EB, BIOS EBH7710H.86A.0101.2013.0516.1649 05/16/2013 [22121.919414] 0000000000000000 ffffffff8b928b84 ffffbb9503c0b888 0000000000000000 [22121.919417] ffffffff8b676dbe ffff9cbec59e53c0 ffffbb9503c0b8e0 0000000000000000 [22121.919419] ffffbb9503c0ba94 ffff9cbf870d7000 0000000000000001 ffffffff8b676e3f [22121.919422] Call Trace: [22121.919427] [<ffffffff8b928b84>] ? dump_stack+0x5c/0x78 [22121.919431] [<ffffffff8b676dbe>] ? __warn+0xbe/0xe0 [22121.919433] [<ffffffff8b676e3f>] ? warn_slowpath_fmt+0x5f/0x80 [22121.919436] [<ffffffff8b7dd7fa>] ? page_is_poisoned+0xa/0x20 [22121.919439] [<ffffffff8b785189>] ? get_page_from_freelist+0x8a9/0xb40 [22121.919447] [<ffffffffc02521ec>] ? usb_hcd_map_urb_for_dma+0x37c/0x570 [usbcore] [22121.919455] [<ffffffffc02535d0>] ? usb_hcd_submit_urb+0x330/0xaa0 [usbcore] [22121.919459] [<ffffffff8b6c0662>] ? up+0x12/0x60 [22121.919468] [<ffffffffc025571d>] ? usb_start_wait_urb+0x6d/0x170 [usbcore] [22121.919471] [<ffffffffc0927c00>] ? dvb_usb_generic_rw+0xe0/0x1c0 [dvb_usb] [22121.919474] [<ffffffffc099969f>] ? su3000_power_ctrl+0x8f/0xa0 [dvb_usb_dw2102] [22121.919477] [<ffffffffc0927702>] ? dvb_usb_device_init+0x242/0x660 [dvb_usb] [22121.919480] [<ffffffff8bbf717c>] ? __mutex_unlock_slowpath+0x6c/0x90 [22121.919483] [<ffffffffc0999c30>] ? dw2102_rc_query+0xa0/0xa0 [dvb_usb_dw2102] [22121.919486] [<ffffffffc0999537>] ? dw2102_probe+0x327/0x3d0 [dvb_usb_dw2102] [22121.919495] [<ffffffffc0259dcd>] ? usb_probe_interface+0x15d/0x2c0 [usbcore] [22121.919498] [<ffffffff8ba6ce0a>] ? driver_probe_device+0x21a/0x420 [22121.919500] [<ffffffff8ba6d0ea>] ? __driver_attach+0xda/0xe0 [22121.919503] [<ffffffff8ba6d010>] ? driver_probe_device+0x420/0x420 [22121.919504] [<ffffffff8ba6a997>] ? bus_for_each_dev+0x67/0xb0 [22121.919507] [<ffffffff8ba6c04a>] ? bus_add_driver+0x16a/0x260 [22121.919509] [<ffffffff8ba6d987>] ? driver_register+0x57/0xc0 [22121.919518] [<ffffffffc025878b>] ? usb_register_driver+0x7b/0x130 [usbcore] [22121.919519] [<ffffffffc09ab000>] ? 0xffffffffc09ab000 [22121.919522] [<ffffffff8b60218b>] ? do_one_initcall+0x4b/0x180 [22121.919525] [<ffffffff8b7c44bd>] ? __vunmap+0x6d/0xc0 [22121.919528] [<ffffffff8b77ac1c>] ? do_init_module+0x5b/0x1ed [22121.919530] [<ffffffff8b700253>] ? load_module+0x2523/0x2a00 [22121.919532] [<ffffffff8b6fca90>] ? __symbol_put+0x60/0x60 [22121.919534] [<ffffffff8b700976>] ? SYSC_finit_module+0xc6/0xf0 [22121.919537] [<ffffffff8b603b1c>] ? do_syscall_64+0x7c/0xf0 [22121.919538] [<ffffffff8bbf9cef>] ? entry_SYSCALL64_slow_path+0x25/0x25 [22121.919540] ---[ end trace 3bec911e97dcc9bb ]--- [22121.919541] dvb-usb: bulk message failed: -11 (2/0) [22121.919678] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [22121.919880] DVB: registering new adapter (Geniatech T220 DVB-T/T2 USB2.0) [22121.919883] dvb-usb: bulk message failed: -11 (6/0) [22121.919885] dw2102: i2c transfer failed. [22121.919887] dvb-usb: bulk message failed: -11 (6/0) [22121.919888] dw2102: i2c transfer failed. [22121.919890] dvb-usb: bulk message failed: -11 (6/0) [22121.919891] dw2102: i2c transfer failed. [22121.919892] dvb-usb: bulk message failed: -11 (6/0) [22121.919893] dw2102: i2c transfer failed. [22121.919895] dvb-usb: bulk message failed: -11 (6/0) [22121.919896] dw2102: i2c transfer failed. [22121.919897] dvb-usb: bulk message failed: -11 (6/0) [22121.919898] dw2102: i2c transfer failed. [22121.919900] dvb-usb: MAC address: 00:00:00:00:00:00 [22121.920889] dvb-usb: bulk message failed: -11 (3/0) [22121.920891] dw2102: command 0x0e transfer failed. [22121.920893] dvb-usb: bulk message failed: -11 (3/0) [22121.920894] dw2102: command 0x0e transfer failed. [22121.920895] dvb-usb: bulk message failed: -11 (3/0) [22121.920896] dw2102: command 0x0e transfer failed. [22121.979322] dvb-usb: bulk message failed: -11 (3/0) [22121.979335] dw2102: command 0x0e transfer failed. [22121.979337] dvb-usb: bulk message failed: -11 (1/0) [22121.979338] dw2102: command 0x51 transfer failed. [22121.983233] dvb-usb: bulk message failed: -11 (5/0) [22121.983235] dw2102: i2c transfer failed. [22121.983238] dvb-usb: bulk message failed: -11 (5/0) [22121.983239] dw2102: i2c transfer failed. [22121.983240] dvb-usb: bulk message failed: -11 (5/0) [22121.983241] dw2102: i2c transfer failed. [22121.983255] dw2102: Failed to attach TDA18271HD/CXD2820R! [22121.983256] dvb-usb: no frontend was attached by 'Geniatech T220 DVB-T/T2 USB2.0' [22122.011310] Registered IR keymap rc-su3000 [22122.011421] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/rc/rc0/input9 [22122.011505] rc rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/rc/rc0 [22122.011506] dvb-usb: schedule remote query interval to 150 msecs. [22122.011508] dw2102: su3000_power_ctrl: 0, initialized 1 [22122.011509] dvb-usb: Geniatech T220 DVB-T/T2 USB2.0 successfully initialized and connected. [22122.011533] usbcore: registered new interface driver dw2102 [22122.167322] dvb-usb: bulk message failed: -11 (1/0) [22122.167327] dw2102: i2c transfer failed. [22122.323317] dvb-usb: bulk message failed: -11 (1/0) [22122.323321] dw2102: i2c transfer failed. [22122.479292] dvb-usb: bulk message failed: -11 (1/0) [22122.479297] dw2102: i2c transfer failed. [22122.635295] dvb-usb: bulk message failed: -11 (1/0) [22122.635311] dw2102: i2c transfer failed. [22122.791322] dvb-usb: bulk message failed: -11 (1/0) [22122.791326] dw2102: i2c transfer failed. [22122.947314] dvb-usb: bulk message failed: -11 (1/0) [22122.947327] dw2102: i2c transfer failed. [22123.103331] dvb-usb: bulk message failed: -11 (1/0) [22123.103335] dw2102: i2c transfer failed. [22123.259311] dvb-usb: bulk message failed: -11 (1/0) [22123.259316] dw2102: i2c transfer failed. [22123.415305] dvb-usb: bulk message failed: -11 (1/0) [22123.415309] dw2102: i2c transfer failed. [22123.571306] dvb-usb: bulk message failed: -11 (1/0) [22123.571311] dw2102: i2c transfer failed. [22123.727315] dvb-usb: bulk message failed: -11 (1/0) [22123.727319] dw2102: i2c transfer failed. [22123.883307] dvb-usb: bulk message failed: -11 (1/0) [22123.883311] dw2102: i2c transfer failed. [22124.039313] dvb-usb: bulk message failed: -11 (1/0) [22124.039317] dw2102: i2c transfer failed. [22124.195301] dvb-usb: bulk message failed: -11 (1/0) [22124.195306] dw2102: i2c transfer failed. [22124.351321] dvb-usb: bulk message failed: -11 (1/0) [22124.351326] dw2102: i2c transfer failed. [22124.507320] dvb-usb: bulk message failed: -11 (1/0) [22124.507324] dw2102: i2c transfer failed. [22124.663303] dvb-usb: bulk message failed: -11 (1/0) [22124.663307] dw2102: i2c transfer failed. [22124.819321] dvb-usb: bulk message failed: -11 (1/0) [22124.819326] dw2102: i2c transfer failed. [22124.975307] dvb-usb: bulk message failed: -11 (1/0) [22124.975320] dw2102: i2c transfer failed. [22125.131308] dvb-usb: bulk message failed: -11 (1/0) [22125.131312] dw2102: i2c transfer failed. [22125.287311] dvb-usb: bulk message failed: -11 (1/0) [22125.287315] dw2102: i2c transfer failed. [22125.443308] dvb-usb: bulk message failed: -11 (1/0) [22125.443311] dw2102: i2c transfer failed. [22125.599311] dvb-usb: bulk message failed: -11 (1/0) [22125.599315] dw2102: i2c transfer failed. [22125.755306] dvb-usb: bulk message failed: -11 (1/0) [22125.755310] dw2102: i2c transfer failed. [22125.911299] dvb-usb: bulk message failed: -11 (1/0) [22125.911303] dw2102: i2c transfer failed. [22126.067304] dvb-usb: bulk message failed: -11 (1/0) [22126.067308] dw2102: i2c transfer failed. [22126.223306] dvb-usb: bulk message failed: -11 (1/0) [22126.223310] dw2102: i2c transfer failed. [22126.379315] dvb-usb: bulk message failed: -11 (1/0) [22126.379319] dw2102: i2c transfer failed. [22126.535298] dvb-usb: bulk message failed: -11 (1/0) [22126.535315] dw2102: i2c transfer failed. [22126.691306] dvb-usb: bulk message failed: -11 (1/0) [22126.691311] dw2102: i2c transfer failed. [22126.847306] dvb-usb: bulk message failed: -11 (1/0) [22126.847311] dw2102: i2c transfer failed. [22127.003304] dvb-usb: bulk message failed: -11 (1/0) [22127.003308] dw2102: i2c transfer failed. [22127.159306] dvb-usb: bulk message failed: -11 (1/0) [22127.159311] dw2102: i2c transfer failed. [22127.315336] dvb-usb: bulk message failed: -11 (1/0) [22127.315340] dw2102: i2c transfer failed. [22127.471309] dvb-usb: bulk message failed: -11 (1/0) [22127.471313] dw2102: i2c transfer failed. [22127.627311] dvb-usb: bulk message failed: -11 (1/0) [22127.627315] dw2102: i2c transfer failed. [22127.783321] dvb-usb: bulk message failed: -11 (1/0) [22127.783325] dw2102: i2c transfer failed. [22127.939312] dvb-usb: bulk message failed: -11 (1/0) [22127.939317] dw2102: i2c transfer failed. [22128.095312] dvb-usb: bulk message failed: -11 (1/0) [22128.095329] dw2102: i2c transfer failed. [22128.251311] dvb-usb: bulk message failed: -11 (1/0) [22128.251315] dw2102: i2c transfer failed. [22128.407321] dvb-usb: bulk message failed: -11 (1/0) [22128.407324] dw2102: i2c transfer failed. [22128.563322] dvb-usb: bulk message failed: -11 (1/0) [22128.563326] dw2102: i2c transfer failed. [22128.719323] dvb-usb: bulk message failed: -11 (1/0) [22128.719338] dw2102: i2c transfer failed. [22128.879331] dvb-usb: bulk message failed: -11 (1/0) [22128.879335] dw2102: i2c transfer failed. [22129.035328] dvb-usb: bulk message failed: -11 (1/0) [22129.035332] dw2102: i2c transfer failed. [22129.191301] dvb-usb: bulk message failed: -11 (1/0) [22129.191305] dw2102: i2c transfer failed. [22129.347343] dvb-usb: bulk message failed: -11 (1/0) [22129.347347] dw2102: i2c transfer failed. [22129.503342] dvb-usb: bulk message failed: -11 (1/0) [22129.503347] dw2102: i2c transfer failed. [22129.659326] dvb-usb: bulk message failed: -11 (1/0) [22129.659330] dw2102: i2c transfer failed. [22129.815328] dvb-usb: bulk message failed: -11 (1/0) [22129.815345] dw2102: i2c transfer failed. [22129.971331] dvb-usb: bulk message failed: -11 (1/0) [22129.971335] dw2102: i2c transfer failed. [22130.127341] dvb-usb: bulk message failed: -11 (1/0) [22130.127345] dw2102: i2c transfer failed. [22130.283371] dvb-usb: bulk message failed: -11 (1/0) [22130.283375] dw2102: i2c transfer failed. [22130.439353] dvb-usb: bulk message failed: -11 (1/0) [22130.439357] dw2102: i2c transfer failed. [22130.595339] dvb-usb: bulk message failed: -11 (1/0) [22130.595343] dw2102: i2c transfer failed. [22130.751335] dvb-usb: bulk message failed: -11 (1/0) [22130.751339] dw2102: i2c transfer failed. [22130.907330] dvb-usb: bulk message failed: -11 (1/0) [22130.907335] dw2102: i2c transfer failed. [22131.063337] dvb-usb: bulk message failed: -11 (1/0) [22131.063341] dw2102: i2c transfer failed. [22131.219318] dvb-usb: bulk message failed: -11 (1/0) [22131.219322] dw2102: i2c transfer failed. [22131.375321] dvb-usb: bulk message failed: -11 (1/0) [22131.375334] dw2102: i2c transfer failed. [22131.531329] dvb-usb: bulk message failed: -11 (1/0) [22131.531333] dw2102: i2c transfer failed. [22131.687338] dvb-usb: bulk message failed: -11 (1/0) [22131.687342] dw2102: i2c transfer failed. [22131.843349] dvb-usb: bulk message failed: -11 (1/0) [22131.843352] dw2102: i2c transfer failed. [22131.999333] dvb-usb: bulk message failed: -11 (1/0) [22131.999337] dw2102: i2c transfer failed. [22132.155331] dvb-usb: bulk message failed: -11 (1/0) [22132.155335] dw2102: i2c transfer failed. [22132.311334] dvb-usb: bulk message failed: -11 (1/0) [22132.311338] dw2102: i2c transfer failed. [22132.467334] dvb-usb: bulk message failed: -11 (1/0) [22132.467338] dw2102: i2c transfer failed. [22132.623320] dvb-usb: bulk message failed: -11 (1/0) [22132.623323] dw2102: i2c transfer failed. [22132.779333] dvb-usb: bulk message failed: -11 (1/0) [22132.779337] dw2102: i2c transfer failed. [22132.935330] dvb-usb: bulk message failed: -11 (1/0) [22132.935334] dw2102: i2c transfer failed. [22133.091325] dvb-usb: bulk message failed: -11 (1/0) [22133.091329] dw2102: i2c transfer failed. [22133.251310] dvb-usb: bulk message failed: -11 (1/0) [22133.251312] dw2102: i2c transfer failed. [22133.407330] dvb-usb: bulk message failed: -11 (1/0) [22133.407335] dw2102: i2c transfer failed. [22133.563348] dvb-usb: bulk message failed: -11 (1/0) [22133.563352] dw2102: i2c transfer failed. [22133.719331] dvb-usb: bulk message failed: -11 (1/0) [22133.719335] dw2102: i2c transfer failed. [22133.875330] dvb-usb: bulk message failed: -11 (1/0) [22133.875335] dw2102: i2c transfer failed. [22134.031330] dvb-usb: bulk message failed: -11 (1/0) [22134.031334] dw2102: i2c transfer failed. [22134.187342] dvb-usb: bulk message failed: -11 (1/0) [22134.187346] dw2102: i2c transfer failed. [22134.343333] dvb-usb: bulk message failed: -11 (1/0) [22134.343346] dw2102: i2c transfer failed. [22134.499346] dvb-usb: bulk message failed: -11 (1/0) [22134.499350] dw2102: i2c transfer failed. [22134.655341] dvb-usb: bulk message failed: -11 (1/0) [22134.655345] dw2102: i2c transfer failed. [22134.811330] dvb-usb: bulk message failed: -11 (1/0) [22134.811334] dw2102: i2c transfer failed. [22134.967335] dvb-usb: bulk message failed: -11 (1/0) [22134.967339] dw2102: i2c transfer failed. [22135.123346] dvb-usb: bulk message failed: -11 (1/0) [22135.123351] dw2102: i2c transfer failed. [22135.279329] dvb-usb: bulk message failed: -11 (1/0) [22135.279333] dw2102: i2c transfer failed. [22135.435344] dvb-usb: bulk message failed: -11 (1/0) [22135.435349] dw2102: i2c transfer failed. [22135.591346] dvb-usb: bulk message failed: -11 (1/0) [22135.591351] dw2102: i2c transfer failed. [22135.747337] dvb-usb: bulk message failed: -11 (1/0) [22135.747341] dw2102: i2c transfer failed. [22135.903335] dvb-usb: bulk message failed: -11 (1/0) [22135.903339] dw2102: i2c transfer failed. [22136.059355] dvb-usb: bulk message failed: -11 (1/0) [22136.059359] dw2102: i2c transfer failed. [22136.215334] dvb-usb: bulk message failed: -11 (1/0) [22136.215339] dw2102: i2c transfer failed. [22136.371331] dvb-usb: bulk message failed: -11 (1/0) [22136.371334] dw2102: i2c transfer failed. [22136.527344] dvb-usb: bulk message failed: -11 (1/0) [22136.527349] dw2102: i2c transfer failed. [22136.683348] dvb-usb: bulk message failed: -11 (1/0) [22136.683352] dw2102: i2c transfer failed. [22136.839334] dvb-usb: bulk message failed: -11 (1/0) [22136.839338] dw2102: i2c transfer failed. [22136.995346] dvb-usb: bulk message failed: -11 (1/0) [22136.995350] dw2102: i2c transfer failed. [22137.151367] dvb-usb: bulk message failed: -11 (1/0) [22137.151371] dw2102: i2c transfer failed. [22137.307370] dvb-usb: bulk message failed: -11 (1/0) [22137.307374] dw2102: i2c transfer failed. [22137.463359] dvb-usb: bulk message failed: -11 (1/0) [22137.463363] dw2102: i2c transfer failed. [22137.619372] dvb-usb: bulk message failed: -11 (1/0) [22137.619376] dw2102: i2c transfer failed. [22137.775330] dvb-usb: bulk message failed: -11 (1/0) [22137.775334] dw2102: i2c transfer failed. [22137.931358] dvb-usb: bulk message failed: -11 (1/0) [22137.931362] dw2102: i2c transfer failed. [22138.087371] dvb-usb: bulk message failed: -11 (1/0) [22138.087376] dw2102: i2c transfer failed. [22138.243365] dvb-usb: bulk message failed: -11 (1/0) [22138.243369] dw2102: i2c transfer failed. [22138.399359] dvb-usb: bulk message failed: -11 (1/0) [22138.399364] dw2102: i2c transfer failed. [22138.555359] dvb-usb: bulk message failed: -11 (1/0) [22138.555364] dw2102: i2c transfer failed. [22138.711359] dvb-usb: bulk message failed: -11 (1/0) [22138.711365] dw2102: i2c transfer failed. [22138.867358] dvb-usb: bulk message failed: -11 (1/0) [22138.867362] dw2102: i2c transfer failed. [22139.023339] dvb-usb: bulk message failed: -11 (1/0) [22139.023342] dw2102: i2c transfer failed. [22139.179347] dvb-usb: bulk message failed: -11 (1/0) [22139.179351] dw2102: i2c transfer failed. [22139.335347] dvb-usb: bulk message failed: -11 (1/0) [22139.335351] dw2102: i2c transfer failed. [22139.491347] dvb-usb: bulk message failed: -11 (1/0) [22139.491351] dw2102: i2c transfer failed. [22139.647357] dvb-usb: bulk message failed: -11 (1/0) [22139.647361] dw2102: i2c transfer failed. [22139.803367] dvb-usb: bulk message failed: -11 (1/0) [22139.803371] dw2102: i2c transfer failed. [22139.959348] dvb-usb: bulk message failed: -11 (1/0) [22139.959353] dw2102: i2c transfer failed. [22140.115356] dvb-usb: bulk message failed: -11 (1/0) [22140.115359] dw2102: i2c transfer failed. [22140.271357] dvb-usb: bulk message failed: -11 (1/0) [22140.271362] dw2102: i2c transfer failed. [22140.427342] dvb-usb: bulk message failed: -11 (1/0) [22140.427356] dw2102: i2c transfer failed. [22140.583347] dvb-usb: bulk message failed: -11 (1/0) [22140.583352] dw2102: i2c transfer failed. [22140.739362] dvb-usb: bulk message failed: -11 (1/0) [22140.739366] dw2102: i2c transfer failed. [22140.895350] dvb-usb: bulk message failed: -11 (1/0) [22140.895354] dw2102: i2c transfer failed. [22141.051359] dvb-usb: bulk message failed: -11 (1/0) [22141.051364] dw2102: i2c transfer failed. [22141.207346] dvb-usb: bulk message failed: -11 (1/0) [22141.207350] dw2102: i2c transfer failed. [22141.363378] dvb-usb: bulk message failed: -11 (1/0) [22141.363381] dw2102: i2c transfer failed. [22141.519351] dvb-usb: bulk message failed: -11 (1/0) [22141.519355] dw2102: i2c transfer failed. [22141.675355] dvb-usb: bulk message failed: -11 (1/0) [22141.675360] dw2102: i2c transfer failed. [22141.831354] dvb-usb: bulk message failed: -11 (1/0) [22141.831359] dw2102: i2c transfer failed. [22141.987354] dvb-usb: bulk message failed: -11 (1/0) [22141.987358] dw2102: i2c transfer failed. [22142.143380] dvb-usb: bulk message failed: -11 (1/0) [22142.143384] dw2102: i2c transfer failed. [22142.299380] dvb-usb: bulk message failed: -11 (1/0) [22142.299384] dw2102: i2c transfer failed. [22142.455357] dvb-usb: bulk message failed: -11 (1/0) [22142.455361] dw2102: i2c transfer failed. [22142.611360] dvb-usb: bulk message failed: -11 (1/0) [22142.611365] dw2102: i2c transfer failed. [22142.767355] dvb-usb: bulk message failed: -11 (1/0) [22142.767359] dw2102: i2c transfer failed. [22142.923394] dvb-usb: bulk message failed: -11 (1/0) [22142.923398] dw2102: i2c transfer failed. [22143.079375] dvb-usb: bulk message failed: -11 (1/0) [22143.079379] dw2102: i2c transfer failed. [22143.235384] dvb-usb: bulk message failed: -11 (1/0) [22143.235388] dw2102: i2c transfer failed. [22143.391369] dvb-usb: bulk message failed: -11 (1/0) [22143.391373] dw2102: i2c transfer failed. [22143.547372] dvb-usb: bulk message failed: -11 (1/0) [22143.547376] dw2102: i2c transfer failed. [22143.703364] dvb-usb: bulk message failed: -11 (1/0) [22143.703378] dw2102: i2c transfer failed. [22143.859352] dvb-usb: bulk message failed: -11 (1/0) [22143.859356] dw2102: i2c transfer failed. [22144.015360] dvb-usb: bulk message failed: -11 (1/0) [22144.015364] dw2102: i2c transfer failed. [22144.171370] dvb-usb: bulk message failed: -11 (1/0) [22144.171374] dw2102: i2c transfer failed. [22144.327365] dvb-usb: bulk message failed: -11 (1/0) [22144.327369] dw2102: i2c transfer failed. [22144.483402] dvb-usb: bulk message failed: -11 (1/0) [22144.483406] dw2102: i2c transfer failed. [22144.639409] dvb-usb: bulk message failed: -11 (1/0) [22144.639414] dw2102: i2c transfer failed. [22144.795386] dvb-usb: bulk message failed: -11 (1/0) [22144.795390] dw2102: i2c transfer failed. [22144.951396] dvb-usb: bulk message failed: -11 (1/0) [22144.951400] dw2102: i2c transfer failed. [22145.107394] dvb-usb: bulk message failed: -11 (1/0) [22145.107398] dw2102: i2c transfer failed. [22145.263382] dvb-usb: bulk message failed: -11 (1/0) [22145.263387] dw2102: i2c transfer failed. [22145.419365] dvb-usb: bulk message failed: -11 (1/0) [22145.419370] dw2102: i2c transfer failed. [22145.575383] dvb-usb: bulk message failed: -11 (1/0) [22145.575387] dw2102: i2c transfer failed. [22145.731377] dvb-usb: bulk message failed: -11 (1/0) [22145.731381] dw2102: i2c transfer failed. [22145.887379] dvb-usb: bulk message failed: -11 (1/0) [22145.887383] dw2102: i2c transfer failed. [22146.043403] dvb-usb: bulk message failed: -11 (1/0) [22146.043407] dw2102: i2c transfer failed. [22146.199385] dvb-usb: bulk message failed: -11 (1/0) [22146.199388] dw2102: i2c transfer failed. [22146.355382] dvb-usb: bulk message failed: -11 (1/0) [22146.355386] dw2102: i2c transfer failed. [22146.511380] dvb-usb: bulk message failed: -11 (1/0) [22146.511393] dw2102: i2c transfer failed. [22146.667383] dvb-usb: bulk message failed: -11 (1/0) [22146.667386] dw2102: i2c transfer failed. [22146.823381] dvb-usb: bulk message failed: -11 (1/0) [22146.823386] dw2102: i2c transfer failed. [22146.979383] dvb-usb: bulk message failed: -11 (1/0) [22146.979387] dw2102: i2c transfer failed. [22147.135372] dvb-usb: bulk message failed: -11 (1/0) [22147.135377] dw2102: i2c transfer failed. [22147.291373] dvb-usb: bulk message failed: -11 (1/0) [22147.291378] dw2102: i2c transfer failed. [22147.447370] dvb-usb: bulk message failed: -11 (1/0) [22147.447374] dw2102: i2c transfer failed. [22147.603369] dvb-usb: bulk message failed: -11 (1/0) [22147.603382] dw2102: i2c transfer failed. [22147.759392] dvb-usb: bulk message failed: -11 (1/0) [22147.759396] dw2102: i2c transfer failed. [22147.915398] dvb-usb: bulk message failed: -11 (1/0) [22147.915403] dw2102: i2c transfer failed. [22148.071380] dvb-usb: bulk message failed: -11 (1/0) [22148.071383] dw2102: i2c transfer failed. [22148.227376] dvb-usb: bulk message failed: -11 (1/0) [22148.227380] dw2102: i2c transfer failed. [22148.383377] dvb-usb: bulk message failed: -11 (1/0) [22148.383381] dw2102: i2c transfer failed. [22148.539377] dvb-usb: bulk message failed: -11 (1/0) [22148.539381] dw2102: i2c transfer failed. [22148.695379] dvb-usb: bulk message failed: -11 (1/0) [22148.695383] dw2102: i2c transfer failed. [22148.851383] dvb-usb: bulk message failed: -11 (1/0) [22148.851387] dw2102: i2c transfer failed. [22149.007374] dvb-usb: bulk message failed: -11 (1/0) [22149.007379] dw2102: i2c transfer failed. [22149.163396] dvb-usb: bulk message failed: -11 (1/0) [22149.163400] dw2102: i2c transfer failed. [22149.319406] dvb-usb: bulk message failed: -11 (1/0) [22149.319411] dw2102: i2c transfer failed. [22149.475381] dvb-usb: bulk message failed: -11 (1/0) [22149.475385] dw2102: i2c transfer failed. [22149.631381] dvb-usb: bulk message failed: -11 (1/0) [22149.631385] dw2102: i2c transfer failed. [22149.787389] dvb-usb: bulk message failed: -11 (1/0) [22149.787393] dw2102: i2c transfer failed. [22149.943382] dvb-usb: bulk message failed: -11 (1/0) [22149.943387] dw2102: i2c transfer failed. [22150.099385] dvb-usb: bulk message failed: -11 (1/0) [22150.099398] dw2102: i2c transfer failed. [22150.255405] dvb-usb: bulk message failed: -11 (1/0) [22150.255410] dw2102: i2c transfer failed. [22150.411394] dvb-usb: bulk message failed: -11 (1/0) [22150.411398] dw2102: i2c transfer failed. [22150.567390] dvb-usb: bulk message failed: -11 (1/0) [22150.567395] dw2102: i2c transfer failed. [22150.723402] dvb-usb: bulk message failed: -11 (1/0) [22150.723405] dw2102: i2c transfer failed. [22150.879396] dvb-usb: bulk message failed: -11 (1/0) [22150.879400] dw2102: i2c transfer failed. [22151.035375] dvb-usb: bulk message failed: -11 (1/0) [22151.035378] dw2102: i2c transfer failed. [22151.191398] dvb-usb: bulk message failed: -11 (1/0) [22151.191402] dw2102: i2c transfer failed. [22151.347411] dvb-usb: bulk message failed: -11 (1/0) [22151.347415] dw2102: i2c transfer failed. [22151.503414] dvb-usb: bulk message failed: -11 (1/0) [22151.503418] dw2102: i2c transfer failed. [22151.659412] dvb-usb: bulk message failed: -11 (1/0) [22151.659417] dw2102: i2c transfer failed. [22151.815397] dvb-usb: bulk message failed: -11 (1/0) [22151.815401] dw2102: i2c transfer failed. [22151.971386] dvb-usb: bulk message failed: -11 (1/0) [22151.971390] dw2102: i2c transfer failed. [22152.127385] dvb-usb: bulk message failed: -11 (1/0) [22152.127389] dw2102: i2c transfer failed. [22152.283385] dvb-usb: bulk message failed: -11 (1/0) [22152.283389] dw2102: i2c transfer failed. [22152.439413] dvb-usb: bulk message failed: -11 (1/0) [22152.439418] dw2102: i2c transfer failed. [22152.595434] dvb-usb: bulk message failed: -11 (1/0) [22152.595438] dw2102: i2c transfer failed. [22152.751415] dvb-usb: bulk message failed: -11 (1/0) [22152.751419] dw2102: i2c transfer failed. [22152.907439] dvb-usb: bulk message failed: -11 (1/0) [22152.907443] dw2102: i2c transfer failed. [22153.063404] dvb-usb: bulk message failed: -11 (1/0) [22153.063408] dw2102: i2c transfer failed. [22153.219403] dvb-usb: bulk message failed: -11 (1/0) [22153.219408] dw2102: i2c transfer failed. [22153.375408] dvb-usb: bulk message failed: -11 (1/0) [22153.375412] dw2102: i2c transfer failed. [22153.531416] dvb-usb: bulk message failed: -11 (1/0) [22153.531420] dw2102: i2c transfer failed. [22153.687388] dvb-usb: bulk message failed: -11 (1/0) [22153.687392] dw2102: i2c transfer failed. [22153.843429] dvb-usb: bulk message failed: -11 (1/0) [22153.843433] dw2102: i2c transfer failed. [22153.999404] dvb-usb: bulk message failed: -11 (1/0) [22153.999409] dw2102: i2c transfer failed. [22154.155414] dvb-usb: bulk message failed: -11 (1/0) [22154.155418] dw2102: i2c transfer failed. [22154.311409] dvb-usb: bulk message failed: -11 (1/0) [22154.311414] dw2102: i2c transfer failed. [22154.467399] dvb-usb: bulk message failed: -11 (1/0) [22154.467403] dw2102: i2c transfer failed. [22154.623401] dvb-usb: bulk message failed: -11 (1/0) [22154.623405] dw2102: i2c transfer failed. [22154.779410] dvb-usb: bulk message failed: -11 (1/0) [22154.779414] dw2102: i2c transfer failed. [22154.935406] dvb-usb: bulk message failed: -11 (1/0) [22154.935410] dw2102: i2c transfer failed. [22155.095402] dvb-usb: bulk message failed: -11 (1/0) [22155.095407] dw2102: i2c transfer failed. [22155.251388] dvb-usb: bulk message failed: -11 (1/0) [22155.251391] dw2102: i2c transfer failed. [22155.407409] dvb-usb: bulk message failed: -11 (1/0) [22155.407413] dw2102: i2c transfer failed. [22155.563419] dvb-usb: bulk message failed: -11 (1/0) [22155.563423] dw2102: i2c transfer failed. [22155.719391] dvb-usb: bulk message failed: -11 (1/0) [22155.719405] dw2102: i2c transfer failed. [22155.875411] dvb-usb: bulk message failed: -11 (1/0) [22155.875415] dw2102: i2c transfer failed. [22156.031395] dvb-usb: bulk message failed: -11 (1/0) [22156.031399] dw2102: i2c transfer failed. [22156.187415] dvb-usb: bulk message failed: -11 (1/0) [22156.187419] dw2102: i2c transfer failed. [22156.343416] dvb-usb: bulk message failed: -11 (1/0) [22156.343420] dw2102: i2c transfer failed. [22156.503429] dvb-usb: bulk message failed: -11 (1/0) [22156.503433] dw2102: i2c transfer failed. [22156.659408] dvb-usb: bulk message failed: -11 (1/0) [22156.659412] dw2102: i2c transfer failed. [22156.815424] dvb-usb: bulk message failed: -11 (1/0) [22156.815429] dw2102: i2c transfer failed. [22156.971414] dvb-usb: bulk message failed: -11 (1/0) [22156.971418] dw2102: i2c transfer failed. [22157.127424] dvb-usb: bulk message failed: -11 (1/0) [22157.127427] dw2102: i2c transfer failed. [22157.283416] dvb-usb: bulk message failed: -11 (1/0) [22157.283420] dw2102: i2c transfer failed. [22157.439404] dvb-usb: bulk message failed: -11 (1/0) [22157.439409] dw2102: i2c transfer failed. [22157.595413] dvb-usb: bulk message failed: -11 (1/0) [22157.595418] dw2102: i2c transfer failed. [22157.751397] dvb-usb: bulk message failed: -11 (1/0) [22157.751400] dw2102: i2c transfer failed. [22157.907403] dvb-usb: bulk message failed: -11 (1/0) [22157.907419] dw2102: i2c transfer failed. [22158.063397] dvb-usb: bulk message failed: -11 (1/0) [22158.063401] dw2102: i2c transfer failed. [22158.219412] dvb-usb: bulk message failed: -11 (1/0) [22158.219416] dw2102: i2c transfer failed. [22158.375407] dvb-usb: bulk message failed: -11 (1/0) [22158.375412] dw2102: i2c transfer failed. [22158.531393] dvb-usb: bulk message failed: -11 (1/0) [22158.531396] dw2102: i2c transfer failed. [22158.687405] dvb-usb: bulk message failed: -11 (1/0) [22158.687408] dw2102: i2c transfer failed. [22158.843415] dvb-usb: bulk message failed: -11 (1/0) [22158.843430] dw2102: i2c transfer failed. [22158.999430] dvb-usb: bulk message failed: -11 (1/0) [22158.999435] dw2102: i2c transfer failed. [22159.155403] dvb-usb: bulk message failed: -11 (1/0) [22159.155408] dw2102: i2c transfer failed. [22159.311413] dvb-usb: bulk message failed: -11 (1/0) [22159.311417] dw2102: i2c transfer failed. [22159.467438] dvb-usb: bulk message failed: -11 (1/0) [22159.467443] dw2102: i2c transfer failed. [22159.623860] dvb-usb: bulk message failed: -11 (1/0) [22159.623864] dw2102: i2c transfer failed. [22159.779410] dvb-usb: bulk message failed: -11 (1/0) [22159.779414] dw2102: i2c transfer failed. [22159.935409] dvb-usb: bulk message failed: -11 (1/0) [22159.935411] dw2102: i2c transfer failed. [22160.091402] dvb-usb: bulk message failed: -11 (1/0) [22160.091405] dw2102: i2c transfer failed. [22160.247410] dvb-usb: bulk message failed: -11 (1/0) [22160.247413] dw2102: i2c transfer failed. [22160.403420] dvb-usb: bulk message failed: -11 (1/0) [22160.403423] dw2102: i2c transfer failed. [22160.559409] dvb-usb: bulk message failed: -11 (1/0) [22160.559412] dw2102: i2c transfer failed. [22160.715405] dvb-usb: bulk message failed: -11 (1/0) [22160.715408] dw2102: i2c transfer failed. [22160.871436] dvb-usb: bulk message failed: -11 (1/0) [22160.871440] dw2102: i2c transfer failed. [22161.027411] dvb-usb: bulk message failed: -11 (1/0) [22161.027428] dw2102: i2c transfer failed. [22161.183429] dvb-usb: bulk message failed: -11 (1/0) [22161.183432] dw2102: i2c transfer failed. [22161.339434] dvb-usb: bulk message failed: -11 (1/0) [22161.339438] dw2102: i2c transfer failed. [22161.495434] dvb-usb: bulk message failed: -11 (1/0) [22161.495438] dw2102: i2c transfer failed. [22161.651426] dvb-usb: bulk message failed: -11 (1/0) [22161.651430] dw2102: i2c transfer failed. [22161.807419] dvb-usb: bulk message failed: -11 (1/0) [22161.807423] dw2102: i2c transfer failed. [22161.963428] dvb-usb: bulk message failed: -11 (1/0) [22161.963432] dw2102: i2c transfer failed. [22162.123414] dvb-usb: bulk message failed: -11 (1/0) [22162.123439] dw2102: i2c transfer failed. [22162.279425] dvb-usb: bulk message failed: -11 (1/0) [22162.279429] dw2102: i2c transfer failed. [22162.435424] dvb-usb: bulk message failed: -11 (1/0) [22162.435429] dw2102: i2c transfer failed. [22162.591433] dvb-usb: bulk message failed: -11 (1/0) [22162.591437] dw2102: i2c transfer failed. [22162.747418] dvb-usb: bulk message failed: -11 (1/0) [22162.747422] dw2102: i2c transfer failed. [22162.903434] dvb-usb: bulk message failed: -11 (1/0) [22162.903439] dw2102: i2c transfer failed. [22163.059434] dvb-usb: bulk message failed: -11 (1/0) [22163.059438] dw2102: i2c transfer failed. [22163.215420] dvb-usb: bulk message failed: -11 (1/0) [22163.215424] dw2102: i2c transfer failed. [22163.371426] dvb-usb: bulk message failed: -11 (1/0) [22163.371431] dw2102: i2c transfer failed. [22163.527446] dvb-usb: bulk message failed: -11 (1/0) [22163.527450] dw2102: i2c transfer failed. [22163.683429] dvb-usb: bulk message failed: -11 (1/0) [22163.683434] dw2102: i2c transfer failed. [22163.839430] dvb-usb: bulk message failed: -11 (1/0) [22163.839434] dw2102: i2c transfer failed. [22163.995432] dvb-usb: bulk message failed: -11 (1/0) [22163.995437] dw2102: i2c transfer failed. [22164.151456] dvb-usb: bulk message failed: -11 (1/0) [22164.151461] dw2102: i2c transfer failed. [22164.307447] dvb-usb: bulk message failed: -11 (1/0) [22164.307450] dw2102: i2c transfer failed. [22164.463446] dvb-usb: bulk message failed: -11 (1/0) [22164.463451] dw2102: i2c transfer failed. [22164.619438] dvb-usb: bulk message failed: -11 (1/0) [22164.619442] dw2102: i2c transfer failed. [22164.775417] dvb-usb: bulk message failed: -11 (1/0) [22164.775419] dw2102: i2c transfer failed. [22164.931436] dvb-usb: bulk message failed: -11 (1/0) [22164.931440] dw2102: i2c transfer failed. [22165.087432] dvb-usb: bulk message failed: -11 (1/0) [22165.087437] dw2102: i2c transfer failed. [22165.243437] dvb-usb: bulk message failed: -11 (1/0) [22165.243442] dw2102: i2c transfer failed. [22165.399417] dvb-usb: bulk message failed: -11 (1/0) [22165.399420] dw2102: i2c transfer failed. [22165.555426] dvb-usb: bulk message failed: -11 (1/0) [22165.555429] dw2102: i2c transfer failed. [22165.715445] dvb-usb: bulk message failed: -11 (1/0) [22165.715461] dw2102: i2c transfer failed. [22165.871458] dvb-usb: bulk message failed: -11 (1/0) [22165.871462] dw2102: i2c transfer failed. [22166.027451] dvb-usb: bulk message failed: -11 (1/0) [22166.027455] dw2102: i2c transfer failed. [22166.183429] dvb-usb: bulk message failed: -11 (1/0) [22166.183446] dw2102: i2c transfer failed. [22166.339423] dvb-usb: bulk message failed: -11 (1/0) [22166.339426] dw2102: i2c transfer failed. [22166.495428] dvb-usb: bulk message failed: -11 (1/0) [22166.495431] dw2102: i2c transfer failed. [22166.651438] dvb-usb: bulk message failed: -11 (1/0) [22166.651442] dw2102: i2c transfer failed. [22166.807452] dvb-usb: bulk message failed: -11 (1/0) [22166.807455] dw2102: i2c transfer failed. [22166.963449] dvb-usb: bulk message failed: -11 (1/0) [22166.963454] dw2102: i2c transfer failed. [22167.119433] dvb-usb: bulk message failed: -11 (1/0) [22167.119437] dw2102: i2c transfer failed. [22167.275430] dvb-usb: bulk message failed: -11 (1/0) [22167.275433] dw2102: i2c transfer failed. [22167.431425] dvb-usb: bulk message failed: -11 (1/0) [22167.431428] dw2102: i2c transfer failed. [22167.587429] dvb-usb: bulk message failed: -11 (1/0) [22167.587432] dw2102: i2c transfer failed. [22167.743440] dvb-usb: bulk message failed: -11 (1/0) [22167.743443] dw2102: i2c transfer failed. [22167.899473] dvb-usb: bulk message failed: -11 (1/0) [22167.899477] dw2102: i2c transfer failed. [22168.055471] dvb-usb: bulk message failed: -11 (1/0) [22168.055475] dw2102: i2c transfer failed. [22168.211478] dvb-usb: bulk message failed: -11 (1/0) [22168.211482] dw2102: i2c transfer failed. [22168.367457] dvb-usb: bulk message failed: -11 (1/0) [22168.367461] dw2102: i2c transfer failed. [22168.523458] dvb-usb: bulk message failed: -11 (1/0) [22168.523462] dw2102: i2c transfer failed. [22168.679458] dvb-usb: bulk message failed: -11 (1/0) [22168.679462] dw2102: i2c transfer failed. [22168.835455] dvb-usb: bulk message failed: -11 (1/0) [22168.835460] dw2102: i2c transfer failed. [22168.991461] dvb-usb: bulk message failed: -11 (1/0) [22168.991465] dw2102: i2c transfer failed. [22169.147450] dvb-usb: bulk message failed: -11 (1/0) [22169.147454] dw2102: i2c transfer failed. [22169.303445] dvb-usb: bulk message failed: -11 (1/0) [22169.303450] dw2102: i2c transfer failed. [22169.459460] dvb-usb: bulk message failed: -11 (1/0) [22169.459464] dw2102: i2c transfer failed. [22169.615450] dvb-usb: bulk message failed: -11 (1/0) [22169.615454] dw2102: i2c transfer failed. [22169.771449] dvb-usb: bulk message failed: -11 (1/0) [22169.771453] dw2102: i2c transfer failed. [22169.927445] dvb-usb: bulk message failed: -11 (1/0) [22169.927449] dw2102: i2c transfer failed. [22170.083451] dvb-usb: bulk message failed: -11 (1/0) [22170.083455] dw2102: i2c transfer failed. [22170.239455] dvb-usb: bulk message failed: -11 (1/0) [22170.239469] dw2102: i2c transfer failed. [22170.395454] dvb-usb: bulk message failed: -11 (1/0) [22170.395459] dw2102: i2c transfer failed. [22170.551456] dvb-usb: bulk message failed: -11 (1/0) [22170.551470] dw2102: i2c transfer failed. [22170.707468] dvb-usb: bulk message failed: -11 (1/0) [22170.707472] dw2102: i2c transfer failed. [22170.863446] dvb-usb: bulk message failed: -11 (1/0) [22170.863450] dw2102: i2c transfer failed. [22171.019470] dvb-usb: bulk message failed: -11 (1/0) [22171.019474] dw2102: i2c transfer failed. [22171.175454] dvb-usb: bulk message failed: -11 (1/0) [22171.175471] dw2102: i2c transfer failed.Bus 001 Device 005: ID 1f4d:d220 G-Tek Electronics Group Geniatech T220 DVB-T2 TV Stick Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1f4d G-Tek Electronics Group idProduct 0xd220 Geniatech T220 DVB-T2 TV Stick bcdDevice 0.00 iManufacturer 1 Geniatech iProduct 2 USB Device iSerial 3 0001 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 219 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 4 Default bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 1 bInterfaceProtocol 1 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 1 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 1 bInterfaceProtocol 1 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 3 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x13f2 3x 1010 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 2 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 1 bInterfaceProtocol 1 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 3 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x12d6 3x 726 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 3 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 1 bInterfaceProtocol 1 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 3 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x12ae 3x 686 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 4 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 1 bInterfaceProtocol 1 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 3 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x03ca 1x 970 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 5 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 1 bInterfaceProtocol 1 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 3 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x02ac 1x 684 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 6 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 1 bInterfaceProtocol 1 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 3 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x03ac 1x 940 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered)Attachment: signature.asc
Description: OpenPGP digital signature
--- End Message ---
--- Begin Message ---
- To: 852975-done@bugs.debian.org, Philip Rinn <rinni@inventati.org>
- Subject: Re: Bug#852975: dvb_usb_dw2102 uses stack for USB buffers
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Sun, 24 Sep 2017 23:45:07 +0100
- Message-id: <1506293107.2852.44.camel@decadent.org.uk>
- In-reply-to: <7ee2db41-7713-af37-0719-3142fdb848bd@inventati.org>
- References: <99f2bd0b-5491-4815-7303-c9fc4f6e5143@inventati.org> <7ee2db41-7713-af37-0719-3142fdb848bd@inventati.org>
Version: 4.9.16-1 On Thu, 2017-08-24 at 14:59 +0200, Philip Rinn wrote: > Control: fixed -1 linux/4.12.6-1 > > Hi, > > this is fixed at least for linux 4.12. Don't know about other > versions. Yes, this was fixed by: commit 606142af57dad981b78707234cfbd15f9f7b7125 Author: Jonathan McDowell <noodles@earth.li> Date: Wed Feb 15 18:29:15 2017 -0200 [media] dw2102: don't do DMA on stack which was also backported in 4.9.16. Ben. -- Ben Hutchings Make three consecutive correct guesses and you will be considered an expert.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---