Your message dated Sun, 27 Aug 2017 14:01:44 +0100 with message-id <1503838904.3688.79.camel@decadent.org.uk> and subject line Re: Bug#803987: firmware-realtek: Very weak signal on RTL8723BE adaptor has caused the Debian Bug report #803987, regarding firmware-realtek: Very weak signal on RTL8723BE adaptor to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 803987: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=803987 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: firmware-realtek: Very weak signal on RTL8723BE adaptor
- From: Antonio Peiro Saez <antonio.peiro@arrakis.es>
- Date: Tue, 03 Nov 2015 22:48:36 +0100
- Message-id: <20151103214836.4379.52030.reportbug@BB-8.azkarel.org>
Package: firmware-realtek Version: 20151018-2 Severity: important Dear Maintainer, *** Reporter, please consider answering these questions, where appropriate *** * What led up to the situation? * What exactly did you do (or not do) that was effective (or ineffective)? * What was the outcome of this action? * What outcome did you expect instead? *** End of the template - remove these template lines *** After a clean installation of Debian 8.2 in a disk partition of my laptop the Realtek wireless network adapter, and the Realtek ethernet controller needed the installation of the nonfree firmware. antonio@BB-8:~$ uname -a Linux BB-8 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u4 (2015-09-19) x86_64 GNU/Linux antonio@BB-8:~$ lspci | grep Realtek 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 07) The installation of the firmware-realtek 0.43 package included with the Debian distribution wasn't a problem. The ethernet controller works fine but the Wifi adapter not. It is a very strange situation because de wireless network adapter only catch the router signal if the laptop is situated at less than 1 meter from the router antenna. Even in this situation the signal level is very weak and it is impossible to detect any other access points root@BB-8:/home/antonio# iwlist wlan0 scan wlan0 Scan completed : Cell 01 - Address: E0:91:53:0A:4E:7B Channel:2 Frequency:2.417 GHz (Channel 2) Quality=36/70 Signal level=-74 dBm Encryption key:on ESSID:"X-Wing" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=0000000bd1295984 Extra: Last beacon: 8ms ago IE: Unknown: 0006582D57696E67 IE: Unknown: 010482848B96 IE: Unknown: 030102 IE: Unknown: 0706455320010D14 IE: Unknown: 2A0100 IE: Unknown: 32080C1218243048606C IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Preauthentication Supported IE: Unknown: DD050010910400 root@BB-8:/home/antonio# iwconfig wlan0 wlan0 IEEE 802.11bgn ESSID:"X-Wing" Mode:Managed Frequency:2.417 GHz Access Point: E0:91:53:0A:4E:7B Bit Rate=18 Mb/s Tx-Power=20 dBm Retry short limit:7 RTS thr=2347 B Fragment thr:off Encryption key:off Power Management:off Link Quality=38/70 Signal level=-72 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Moreover, several messages are registered in the debian log about the wlan0 during one session: [ 8876.588934] wlan0: Connection to AP e0:91:53:0a:4e:7b lost [ 8876.653368] cfg80211: Calling CRDA to update world regulatory domain [ 8876.661069] cfg80211: World regulatory domain updated: [ 8876.661080] cfg80211: DFS Master region: unset [ 8876.661085] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 8876.661092] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 8876.661099] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 8876.661105] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 8876.661112] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 8876.661119] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 8876.661125] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 8876.661130] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 8876.661136] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 8877.566189] wlan0: authenticate with e0:91:53:0a:4e:7b [ 8877.585525] wlan0: send auth to e0:91:53:0a:4e:7b (try 1/3) [ 8877.588307] wlan0: authenticated [ 8877.588738] rtl8723be 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 8877.588743] rtl8723be 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 8877.588747] rtl8723be 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 8877.588993] wlan0: associate with e0:91:53:0a:4e:7b (try 1/3) [ 8877.591189] wlan0: RX AssocResp from e0:91:53:0a:4e:7b (capab=0x431 status=0 aid=5) [ 8877.591294] wlan0: associated [ 8877.591530] cfg80211: Calling CRDA for country: ES [ 8877.597655] cfg80211: Regulatory domain changed to country: ES [ 8877.597665] cfg80211: DFS Master region: ETSI [ 8877.597670] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 8877.597677] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 8877.597684] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2301 mBm), (N/A) [ 8877.597692] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 8877.597698] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [ 8877.597703] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) The rtl8723BE device conbine a wireless network adapter and a bluetooth adapter. Bluetooth do not detect any device too. Although it is just over the laptop. After that, I tried to upgrade the firmware-realtek package to the versions 0.44 and to the last one 20151018-2 but no improvements were find. I started to search in the web for people with the same problem and I read that same people has get a better performance including the following parameters to the driver module: root@BB-8:/home/antonio# cat /etc/modprobe.d/rtl8723be.conf options rtl8723be swlps=0 swenc=0 fwlps=0 ips=0 msi=0 debug=0 disable_watchdog=1 It is easy to think there are some kind of hardware problem, but I have found in the web a lot of people with the same problem in Lenovo and HP laptops. I have a dual boot in my laptop with grub2 and the wireless network adapter works perfectly under Windows 10 at 25 meter distance from the same access point. It really looks like antenna of the wireless network adapter has been dissabled in some way!! I include as an attached file the dmesg output from my last session. The unique strange thing in the bootup sequence is that (perhaps there are more but I am a novice): [ 0.980220] platform MSFT0101:00: failed to claim resource 0 [ 0.980229] acpi MSFT0101:00: platform device creation failed: -16 Anything I could do to help in the resolution of this issue will be welcome. Thank you very much in advance for your help. Antonio Peiro -- System Information: Debian Release: 8.2 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores) Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) firmware-realtek depends on no packages. firmware-realtek recommends no packages. Versions of packages firmware-realtek suggests: ii initramfs-tools 0.120 -- no debconf information[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt11-1+deb8u4 (2015-09-19) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=f38620f2-824b-470c-9112-f88da1a68eb5 ro quiet [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000085fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000086000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000093aecfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000093aed000-0x00000000942edfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000942ee000-0x000000009e17efff] usable [ 0.000000] BIOS-e820: [mem 0x000000009e17f000-0x000000009e97efff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000009e97f000-0x000000009f97efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009f97f000-0x000000009fb7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009fb7f000-0x000000009fbfefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009fbff000-0x000000009fbfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000009fc00000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0900000-0x00000000f09fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by INSYDE Corp. [ 0.000000] efi: ACPI=0x9fbfe000 ACPI 2.0=0x9fbfe014 SMBIOS=0x9f97ef98 [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB) [ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000006e000) (0MB) [ 0.000000] efi: mem02: type=10, attr=0xf, range=[0x000000000006e000-0x0000000000070000) (0MB) [ 0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000086000) (0MB) [ 0.000000] efi: mem04: type=0, attr=0xf, range=[0x0000000000086000-0x0000000000088000) (0MB) [ 0.000000] efi: mem05: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB) [ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001018000) (15MB) [ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000001018000-0x0000000001200000) (1MB) [ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000001200000-0x0000000002118000) (15MB) [ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000002118000-0x0000000036208000) (832MB) [ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x0000000036208000-0x00000000370fc000) (14MB) [ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x00000000370fc000-0x000000006a95a000) (824MB) [ 0.000000] efi: mem12: type=2, attr=0xf, range=[0x000000006a95a000-0x0000000091380000) (618MB) [ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x0000000091380000-0x00000000913a0000) (0MB) [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x00000000913a0000-0x00000000938d3000) (37MB) [ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x00000000938d3000-0x0000000093aed000) (2MB) [ 0.000000] efi: mem16: type=0, attr=0xf, range=[0x0000000093aed000-0x00000000942ee000) (8MB) [ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x00000000942ee000-0x000000009437c000) (0MB) [ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x000000009437c000-0x0000000094561000) (1MB) [ 0.000000] efi: mem19: type=1, attr=0xf, range=[0x0000000094561000-0x000000009457f000) (0MB) [ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x000000009457f000-0x0000000099cfa000) (87MB) [ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x0000000099cfa000-0x000000009a6f1000) (9MB) [ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x000000009a6f1000-0x000000009a6f6000) (0MB) [ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x000000009a6f6000-0x000000009a6ff000) (0MB) [ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x000000009a6ff000-0x000000009a700000) (0MB) [ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x000000009a700000-0x000000009a72b000) (0MB) [ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x000000009a72b000-0x000000009a72c000) (0MB) [ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x000000009a72c000-0x000000009a72e000) (0MB) [ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x000000009a72e000-0x000000009a72f000) (0MB) [ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x000000009a72f000-0x000000009a937000) (2MB) [ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x000000009a937000-0x000000009a938000) (0MB) [ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x000000009a938000-0x000000009a96c000) (0MB) [ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x000000009a96c000-0x000000009a96d000) (0MB) [ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x000000009a96d000-0x000000009a984000) (0MB) [ 0.000000] efi: mem34: type=7, attr=0xf, range=[0x000000009a984000-0x000000009a985000) (0MB) [ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x000000009a985000-0x000000009c57f000) (27MB) [ 0.000000] efi: mem36: type=7, attr=0xf, range=[0x000000009c57f000-0x000000009dcf5000) (23MB) [ 0.000000] efi: mem37: type=2, attr=0xf, range=[0x000000009dcf5000-0x000000009dcff000) (0MB) [ 0.000000] efi: mem38: type=3, attr=0xf, range=[0x000000009dcff000-0x000000009e17f000) (4MB) [ 0.000000] efi: mem39: type=5, attr=0x800000000000000f, range=[0x000000009e17f000-0x000000009e97f000) (8MB) [ 0.000000] efi: mem40: type=6, attr=0x800000000000000f, range=[0x000000009e97f000-0x000000009f17f000) (8MB) [ 0.000000] efi: mem41: type=0, attr=0xf, range=[0x000000009f17f000-0x000000009f97f000) (8MB) [ 0.000000] efi: mem42: type=10, attr=0xf, range=[0x000000009f97f000-0x000000009fb7f000) (2MB) [ 0.000000] efi: mem43: type=9, attr=0xf, range=[0x000000009fb7f000-0x000000009fbff000) (0MB) [ 0.000000] efi: mem44: type=4, attr=0xf, range=[0x000000009fbff000-0x000000009fc00000) (0MB) [ 0.000000] efi: mem45: type=7, attr=0xf, range=[0x0000000100000000-0x000000021f000000) (4592MB) [ 0.000000] efi: mem46: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB) [ 0.000000] efi: mem47: type=0, attr=0x0, range=[0x000000009fc00000-0x00000000e0000000) (1028MB) [ 0.000000] efi: mem48: type=11, attr=0x8000000000000000, range=[0x00000000f0900000-0x00000000f0a00000) (1MB) [ 0.000000] efi: mem49: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB) [ 0.000000] efi: mem50: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec02000) (0MB) [ 0.000000] efi: mem51: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB) [ 0.000000] efi: mem52: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed81000) (0MB) [ 0.000000] efi: mem53: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB) [ 0.000000] efi: mem54: type=11, attr=0x8000000000000000, range=[0x00000000ff800000-0x0000000100000000) (8MB) [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Hewlett-Packard HP Notebook/80CB, BIOS F.13 08/13/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFE0000000 write-back [ 0.000000] 2 base 009FB47000 mask FFFFFFF000 uncachable [ 0.000000] 3 base 00FF800000 mask FFFF800000 write-protect [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000021f000000 aka 8688M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0x9fc00 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff88000007c000] 7c000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01cf4000, 0x01cf4fff] PGTABLE [ 0.000000] BRK [0x01cf5000, 0x01cf5fff] PGTABLE [ 0.000000] BRK [0x01cf6000, 0x01cf6fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x21ee00000-0x21effffff] [ 0.000000] [mem 0x21ee00000-0x21effffff] page 2M [ 0.000000] BRK [0x01cf7000, 0x01cf7fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21edfffff] [ 0.000000] [mem 0x21c000000-0x21edfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff] [ 0.000000] [mem 0x200000000-0x21bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x93aecfff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0x939fffff] page 2M [ 0.000000] [mem 0x93a00000-0x93aecfff] page 4k [ 0.000000] init_memory_mapping: [mem 0x942ee000-0x9e17efff] [ 0.000000] [mem 0x942ee000-0x943fffff] page 4k [ 0.000000] [mem 0x94400000-0x9dffffff] page 2M [ 0.000000] [mem 0x9e000000-0x9e17efff] page 4k [ 0.000000] BRK [0x01cf8000, 0x01cf8fff] PGTABLE [ 0.000000] BRK [0x01cf9000, 0x01cf9fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x9fbff000-0x9fbfffff] [ 0.000000] [mem 0x9fbff000-0x9fbfffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G [ 0.000000] RAMDISK: [mem 0x36208000-0x370fbfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000009FBFE014 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x000000009FBC4188 0000D4 (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 0x000000009FBFB000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.000000] ACPI: DSDT 0x000000009FBE8000 00E4C4 (v01 HPQOEM SLIC-MPC F0000000 ACPI 00040000) [ 0.000000] ACPI: FACS 0x000000009FB04000 000040 [ 0.000000] ACPI: TCPA 0x000000009FBFD000 000032 (v02 HPQOEM 80CB 00000000 HP 00040000) [ 0.000000] ACPI: UEFI 0x000000009FBFC000 000236 (v01 HPQOEM 80CB 00000001 HP 00040000) [ 0.000000] ACPI: HPET 0x000000009FBFA000 000038 (v01 HPQOEM 80CB 00000001 HP 00040000) [ 0.000000] ACPI: APIC 0x000000009FBF9000 000090 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.000000] ACPI: MCFG 0x000000009FBF8000 00003C (v01 HPQOEM 80CB 00000001 HP 00040000) [ 0.000000] ACPI: ASF! 0x000000009FBF7000 0000A5 (v32 HPQOEM 80CB 00000001 HP 00040000) [ 0.000000] ACPI: BOOT 0x000000009FBE7000 000028 (v01 HPQOEM 80CB 00000001 HP 00040000) [ 0.000000] ACPI: FPDT 0x000000009FBE5000 000044 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.000000] ACPI: MSDM 0x000000009FBE4000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.000000] ACPI: SSDT 0x000000009FBE3000 000CB4 (v01 HPQOEM 80CB 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009FBDE000 0048A6 (v02 HPQOEM 80CB 00000002 ACPI 00040000) [ 0.000000] ACPI: VFCT 0x000000009FBCF000 00EC84 (v01 HPQOEM 80CB 00000001 HP 00040000) [ 0.000000] ACPI: SSDT 0x000000009FBCE000 00041A (v01 HPQOEM 80CB 00001000 ACPI 00040000) [ 0.000000] ACPI: TPM2 0x000000009FBCD000 000044 (v03 HPQOEM 80CB 20505350 HP 00040000) [ 0.000000] ACPI: SSDT 0x000000009FBCC000 000692 (v01 HPQOEM 80CB 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009FBCB000 000418 (v01 HPQOEM 80CB 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009FBC9000 0016F0 (v01 HPQOEM 80CB 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009FBC8000 00008C (v01 HPQOEM 80CB 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009FBC6000 001153 (v01 HPQOEM 80CB 00000001 ACPI 00040000) [ 0.000000] ACPI: BGRT 0x000000009FBC5000 000038 (v01 HPQOEM 80CB 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009FBC3000 000F8A (v01 HPQOEM 80CB 00000001 ACPI 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21effffff] [ 0.000000] NODE_DATA [mem 0x21eff8000-0x21effcfff] [ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217600000-ffff88021d9fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x21effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0006dfff] [ 0.000000] node 0: [mem 0x00070000-0x00085fff] [ 0.000000] node 0: [mem 0x00100000-0x93aecfff] [ 0.000000] node 0: [mem 0x942ee000-0x9e17efff] [ 0.000000] node 0: [mem 0x9fbff000-0x9fbfffff] [ 0.000000] node 0: [mem 0x100000000-0x21effffff] [ 0.000000] On node 0 totalpages: 1820930 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3971 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8770 pages used for memmap [ 0.000000] DMA32 zone: 641407 pages, LIFO batch:31 [ 0.000000] Normal zone: 16072 pages used for memmap [ 0.000000] Normal zone: 1175552 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 72 [ 0.000000] PM: Registered nosave memory: [mem 0x0006e000-0x0006ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x00086000-0x000bffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x93aed000-0x942edfff] [ 0.000000] PM: Registered nosave memory: [mem 0x9e17f000-0x9e97efff] [ 0.000000] PM: Registered nosave memory: [mem 0x9e97f000-0x9f97efff] [ 0.000000] PM: Registered nosave memory: [mem 0x9f97f000-0x9fb7efff] [ 0.000000] PM: Registered nosave memory: [mem 0x9fb7f000-0x9fbfefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9fc00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf08fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0900000-0xf09fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0a00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xf08fffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88021ec00000 s80896 r8192 d21504 u524288 [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1796010 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=f38620f2-824b-470c-9112-f88da1a68eb5 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB) [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup [ 0.000000] AGP: This costs you 64MB of RAM [ 0.000000] AGP: Mapping aperture over RAM [mem 0x8c000000-0x8fffffff] (65536KB) [ 0.000000] PM: Registered nosave memory: [mem 0x8c000000-0x8fffffff] [ 0.000000] Memory: 6973468K/7283720K available (5209K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 310252K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:33024 nr_irqs:1024 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2195.842 MHz processor [ 0.000051] Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.68 BogoMIPS (lpj=8783368) [ 0.000057] pid_max: default: 32768 minimum: 301 [ 0.000074] ACPI: Core revision 20140424 [ 0.028573] ACPI: All ACPI Tables successfully acquired [ 0.045761] Security Framework initialized [ 0.045793] AppArmor: AppArmor disabled by boot time parameter [ 0.045796] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.046513] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.051461] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.054001] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.054023] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.054580] Initializing cgroup subsys memory [ 0.054591] Initializing cgroup subsys devices [ 0.054606] Initializing cgroup subsys freezer [ 0.054611] Initializing cgroup subsys net_cls [ 0.054621] Initializing cgroup subsys blkio [ 0.054629] Initializing cgroup subsys perf_event [ 0.054634] Initializing cgroup subsys net_prio [ 0.054691] tseg: 009fc00000 [ 0.054696] CPU: Physical Processor ID: 0 [ 0.054697] CPU: Processor Core ID: 0 [ 0.063533] mce: CPU supports 6 MCE banks [ 0.063547] LVT offset 1 assigned for vector 0xf9 [ 0.063558] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0 tlb_flushall_shift: 6 [ 0.063745] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000) [ 0.067282] ftrace: allocating 21625 entries in 85 pages [ 0.080708] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.120373] smpboot: CPU0: AMD A8-7410 APU with AMD Radeon R5 Graphics (fam: 16, model: 30, stepping: 01) [ 0.226892] Performance Events: AMD PMU driver. [ 0.226900] ... version: 0 [ 0.226901] ... bit width: 48 [ 0.226903] ... generic registers: 4 [ 0.226904] ... value mask: 0000ffffffffffff [ 0.226906] ... max period: 00007fffffffffff [ 0.226907] ... fixed-purpose events: 0 [ 0.226908] ... event mask: 000000000000000f [ 0.229430] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.229643] x86: Booting SMP configuration: [ 0.229646] .... node #0, CPUs: #1 #2 #3 [ 0.295783] x86: Booted up 1 node, 4 CPUs [ 0.295794] smpboot: Total of 4 processors activated (17566.73 BogoMIPS) [ 0.297138] devtmpfs: initialized [ 0.303609] PM: Registering ACPI NVS region [mem 0x0006e000-0x0006ffff] (8192 bytes) [ 0.303613] PM: Registering ACPI NVS region [mem 0x9f97f000-0x9fb7efff] (2097152 bytes) [ 0.305242] pinctrl core: initialized pinctrl subsystem [ 0.305391] NET: Registered protocol family 16 [ 0.305591] cpuidle: using governor ladder [ 0.305595] cpuidle: using governor menu [ 0.305714] ACPI: bus type PCI registered [ 0.305718] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.305901] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.305906] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.306060] PCI: Using configuration type 1 for base access [ 0.319834] ACPI: Added _OSI(Module Device) [ 0.319841] ACPI: Added _OSI(Processor Device) [ 0.319843] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.319845] ACPI: Added _OSI(Processor Aggregator Device) [ 0.323829] ACPI: Executed 1 blocks of module-level executable AML code [ 0.339261] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.465577] ACPI: Interpreter enabled [ 0.465592] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580) [ 0.465599] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) [ 0.465621] ACPI: (supports S0 S3 S4 S5) [ 0.465624] ACPI: Using IOAPIC for interrupt routing [ 0.465865] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.466422] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.467172] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.835297] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.835313] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.835321] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.835570] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.835794] PCI host bridge to bus 0000:00 [ 0.835798] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.835802] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.835804] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.835807] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.835810] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff] [ 0.835813] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff] [ 0.835815] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff] [ 0.835818] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff] [ 0.835820] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.835823] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.835825] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.835828] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.835830] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.835833] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.835835] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff] [ 0.835838] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff] [ 0.835840] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff] [ 0.835843] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff] [ 0.835846] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff] [ 0.835855] pci 0000:00:00.0: [1022:1566] type 00 class 0x060000 [ 0.835976] pci 0000:00:01.0: [1002:9851] type 00 class 0x030000 [ 0.835990] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.835999] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref] [ 0.836006] pci 0000:00:01.0: reg 0x20: [io 0x4000-0x40ff] [ 0.836013] pci 0000:00:01.0: reg 0x24: [mem 0xf0d00000-0xf0d3ffff] [ 0.836019] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.836056] pci 0000:00:01.0: supports D1 D2 [ 0.836059] pci 0000:00:01.0: PME# supported from D1 D2 D3hot [ 0.836167] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300 [ 0.836180] pci 0000:00:01.1: reg 0x10: [mem 0xf0d60000-0xf0d63fff 64bit] [ 0.836230] pci 0000:00:01.1: supports D1 D2 [ 0.836315] pci 0000:00:02.0: [1022:156b] type 00 class 0x060000 [ 0.836419] pci 0000:00:02.1: [1022:1439] type 01 class 0x060400 [ 0.836479] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold [ 0.836578] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400 [ 0.836638] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold [ 0.836736] pci 0000:00:02.5: [1022:1439] type 01 class 0x060400 [ 0.836795] pci 0000:00:02.5: PME# supported from D0 D3hot D3cold [ 0.836898] pci 0000:00:08.0: [1022:1537] type 00 class 0x108000 [ 0.836911] pci 0000:00:08.0: reg 0x10: [mem 0xf0d40000-0xf0d5ffff 64bit pref] [ 0.836917] pci 0000:00:08.0: reg 0x18: [mem 0xf0a00000-0xf0afffff] [ 0.836923] pci 0000:00:08.0: reg 0x1c: [mem 0xf0d70000-0xf0d70fff] [ 0.836932] pci 0000:00:08.0: reg 0x24: [mem 0xf0d6a000-0xf0d6bfff] [ 0.837050] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330 [ 0.837070] pci 0000:00:10.0: reg 0x10: [mem 0xf0d68000-0xf0d69fff 64bit] [ 0.837156] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold [ 0.837233] pci 0000:00:10.0: System wakeup disabled by ACPI [ 0.837292] pci 0000:00:11.0: [1022:7804] type 00 class 0x010601 [ 0.837309] pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f] [ 0.837317] pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127] [ 0.837325] pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117] [ 0.837333] pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123] [ 0.837341] pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f] [ 0.837349] pci 0000:00:11.0: reg 0x24: [mem 0xf0d6f000-0xf0d6f3ff] [ 0.837390] pci 0000:00:11.0: PME# supported from D3hot [ 0.837488] pci 0000:00:12.0: [1022:7808] type 00 class 0x0c0320 [ 0.837503] pci 0000:00:12.0: reg 0x10: [mem 0xf0d6e000-0xf0d6e0ff] [ 0.837564] pci 0000:00:12.0: supports D1 D2 [ 0.837567] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.837634] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.837691] pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320 [ 0.837707] pci 0000:00:13.0: reg 0x10: [mem 0xf0d6d000-0xf0d6d0ff] [ 0.837768] pci 0000:00:13.0: supports D1 D2 [ 0.837770] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.837833] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.837886] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500 [ 0.838016] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300 [ 0.838035] pci 0000:00:14.2: reg 0x10: [mem 0xf0d64000-0xf0d67fff 64bit] [ 0.838092] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.838183] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100 [ 0.838320] pci 0000:00:14.7: [1022:7813] type 00 class 0x080501 [ 0.838337] pci 0000:00:14.7: reg 0x10: [mem 0xf0d6c000-0xf0d6c0ff 64bit] [ 0.838386] pci 0000:00:14.7: PME# supported from D3cold [ 0.838474] pci 0000:00:18.0: [1022:1580] type 00 class 0x060000 [ 0.838562] pci 0000:00:18.1: [1022:1581] type 00 class 0x060000 [ 0.838646] pci 0000:00:18.2: [1022:1582] type 00 class 0x060000 [ 0.838736] pci 0000:00:18.3: [1022:1583] type 00 class 0x060000 [ 0.838826] pci 0000:00:18.4: [1022:1584] type 00 class 0x060000 [ 0.838911] pci 0000:00:18.5: [1022:1585] type 00 class 0x060000 [ 0.839085] pci 0000:00:02.1: PCI bridge to [bus 01] [ 0.839183] pci 0000:02:00.0: [10ec:b723] type 00 class 0x028000 [ 0.839205] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.839234] pci 0000:02:00.0: reg 0x18: [mem 0xf0c00000-0xf0c03fff 64bit] [ 0.839334] pci 0000:02:00.0: supports D1 D2 [ 0.839337] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.847550] pci 0000:00:02.4: PCI bridge to [bus 02] [ 0.847562] pci 0000:00:02.4: bridge window [io 0x3000-0x3fff] [ 0.847566] pci 0000:00:02.4: bridge window [mem 0xf0c00000-0xf0cfffff] [ 0.847732] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000 [ 0.847772] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.847801] pci 0000:03:00.0: reg 0x18: [mem 0xf0b00000-0xf0b00fff 64bit] [ 0.847822] pci 0000:03:00.0: reg 0x20: [mem 0xf0800000-0xf0803fff 64bit pref] [ 0.847929] pci 0000:03:00.0: supports D1 D2 [ 0.847932] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.848040] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.855578] pci 0000:00:02.5: PCI bridge to [bus 03] [ 0.855589] pci 0000:00:02.5: bridge window [io 0x2000-0x2fff] [ 0.855594] pci 0000:00:02.5: bridge window [mem 0xf0b00000-0xf0bfffff] [ 0.855600] pci 0000:00:02.5: bridge window [mem 0xf0800000-0xf08fffff 64bit pref] [ 0.856029] ACPI: IRQ 7 override to edge, high [ 0.979429] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.979519] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.979615] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.979711] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.979791] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.979855] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.979918] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.979982] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.980220] platform MSFT0101:00: failed to claim resource 0 [ 0.980229] acpi MSFT0101:00: platform device creation failed: -16 [ 0.980372] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.980443] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 [ 0.980633] vgaarb: setting as boot device: PCI:0000:00:01.0 [ 0.980636] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none [ 0.980644] vgaarb: loaded [ 0.980646] vgaarb: bridge control possible 0000:00:01.0 [ 0.980810] PCI: Using ACPI for IRQ routing [ 0.982262] PCI: pci_cache_line_size set to 64 bytes [ 0.982331] e820: reserve RAM buffer [mem 0x0006e000-0x0006ffff] [ 0.982334] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff] [ 0.982336] e820: reserve RAM buffer [mem 0x93aed000-0x93ffffff] [ 0.982338] e820: reserve RAM buffer [mem 0x9e17f000-0x9fffffff] [ 0.982341] e820: reserve RAM buffer [mem 0x9fc00000-0x9fffffff] [ 0.982343] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff] [ 0.982539] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.982544] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.984606] Switched to clocksource hpet [ 0.992686] pnp: PnP ACPI init [ 0.992705] ACPI: bus type PNP registered [ 0.992933] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved [ 0.992937] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.992943] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.993169] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.993273] pnp 00:02: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active) [ 0.993363] pnp 00:03: Plug and Play ACPI device, IDs SYN1efc PNP0f13 (active) [ 0.993437] system 00:04: [io 0x0400-0x04cf] could not be reserved [ 0.993441] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.993444] system 00:04: [io 0x04d6] has been reserved [ 0.993447] system 00:04: [io 0x0680-0x06ff] has been reserved [ 0.993450] system 00:04: [io 0x077a] has been reserved [ 0.993453] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.993456] system 00:04: [io 0x0c14] has been reserved [ 0.993459] system 00:04: [io 0x0c50-0x0c52] has been reserved [ 0.993463] system 00:04: [io 0x0c6c] has been reserved [ 0.993466] system 00:04: [io 0x0c6f] has been reserved [ 0.993469] system 00:04: [io 0x0cd0-0x0cdb] has been reserved [ 0.993473] system 00:04: [io 0x0840-0x0847] has been reserved [ 0.993477] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.993583] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.993587] system 00:05: [mem 0xff800000-0xffffffff] has been reserved [ 0.993591] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.189153] pnp: PnP ACPI: found 6 devices [ 1.189159] ACPI: bus type PNP unregistered [ 1.197043] pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: address conflict with reserved [mem 0xff800000-0xffffffff] [ 1.197065] pci 0000:00:02.1: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 1.197070] pci 0000:00:02.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 [ 1.197074] pci 0000:00:02.1: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 [ 1.197095] pci 0000:00:02.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 1.197098] pci 0000:00:02.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 1.197101] pci 0000:00:02.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 1.197113] pci 0000:00:02.1: BAR 14: assigned [mem 0xf0e00000-0xf0ffffff] [ 1.197131] pci 0000:00:02.1: BAR 15: assigned [mem 0xf1000000-0xf11fffff 64bit pref] [ 1.197140] pci 0000:00:01.0: BAR 6: assigned [mem 0xf0d80000-0xf0d9ffff pref] [ 1.197145] pci 0000:00:02.1: BAR 13: assigned [io 0x1000-0x1fff] [ 1.197149] pci 0000:00:02.1: PCI bridge to [bus 01] [ 1.197152] pci 0000:00:02.1: bridge window [io 0x1000-0x1fff] [ 1.197157] pci 0000:00:02.1: bridge window [mem 0xf0e00000-0xf0ffffff] [ 1.197161] pci 0000:00:02.1: bridge window [mem 0xf1000000-0xf11fffff 64bit pref] [ 1.197167] pci 0000:00:02.4: PCI bridge to [bus 02] [ 1.197170] pci 0000:00:02.4: bridge window [io 0x3000-0x3fff] [ 1.197174] pci 0000:00:02.4: bridge window [mem 0xf0c00000-0xf0cfffff] [ 1.197181] pci 0000:00:02.5: PCI bridge to [bus 03] [ 1.197184] pci 0000:00:02.5: bridge window [io 0x2000-0x2fff] [ 1.197188] pci 0000:00:02.5: bridge window [mem 0xf0b00000-0xf0bfffff] [ 1.197192] pci 0000:00:02.5: bridge window [mem 0xf0800000-0xf08fffff 64bit pref] [ 1.197198] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.197201] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.197203] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.197206] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] [ 1.197208] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] [ 1.197210] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] [ 1.197213] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff] [ 1.197215] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff] [ 1.197218] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff] [ 1.197220] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff] [ 1.197222] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff] [ 1.197225] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff] [ 1.197227] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff] [ 1.197230] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff] [ 1.197232] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff] [ 1.197235] pci_bus 0000:00: resource 19 [mem 0xe0000000-0xf7ffffff] [ 1.197237] pci_bus 0000:00: resource 20 [mem 0xfc000000-0xfed3ffff] [ 1.197239] pci_bus 0000:00: resource 21 [mem 0xfed45000-0xffffffff] [ 1.197242] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 1.197245] pci_bus 0000:01: resource 1 [mem 0xf0e00000-0xf0ffffff] [ 1.197247] pci_bus 0000:01: resource 2 [mem 0xf1000000-0xf11fffff 64bit pref] [ 1.197250] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 1.197252] pci_bus 0000:02: resource 1 [mem 0xf0c00000-0xf0cfffff] [ 1.197255] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 1.197257] pci_bus 0000:03: resource 1 [mem 0xf0b00000-0xf0bfffff] [ 1.197260] pci_bus 0000:03: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref] [ 1.197370] NET: Registered protocol family 2 [ 1.197773] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.198007] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.198260] TCP: Hash tables configured (established 65536 bind 65536) [ 1.198316] TCP: reno registered [ 1.198333] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.198383] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.198573] NET: Registered protocol family 1 [ 1.198602] pci 0000:00:01.0: Video device with shadowed ROM [ 1.205724] PCI: CLS 64 bytes, default 64 [ 1.205810] Unpacking initramfs... [ 1.556084] Freeing initrd memory: 15312K (ffff880036208000 - ffff8800370fc000) [ 1.556137] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.556141] software IO TLB [mem 0x95cfa000-0x99cfa000] (64MB) mapped at [ffff880095cfa000-ffff880099cf9fff] [ 1.556258] Simple Boot Flag at 0x44 set to 0x1 [ 1.556515] perf: AMD NB counters detected [ 1.556519] perf: AMD L2I counters detected [ 1.556603] microcode: CPU0: patch_level=0x07030105 [ 1.556613] microcode: CPU1: patch_level=0x07030105 [ 1.556625] microcode: CPU2: patch_level=0x07030105 [ 1.556635] microcode: CPU3: patch_level=0x07030105 [ 1.556730] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 1.556737] LVT offset 0 assigned for vector 0x400 [ 1.556755] perf: AMD IBS detected (0x000000ff) [ 1.556867] simple-framebuffer simple-framebuffer.0: framebuffer at 0xe0000000, 0x420000 bytes, mapped to 0xffffc90004f00000 [ 1.556871] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1366x768x32, linelength=5632 [ 1.561163] Console: switching to colour frame buffer device 170x48 [ 1.565406] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered! [ 1.565841] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.565895] audit: initializing netlink subsys (disabled) [ 1.565925] audit: type=2000 audit(1446495811.452:1): initialized [ 1.566441] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.566469] zbud: loaded [ 1.566744] VFS: Disk quotas dquot_6.5.2 [ 1.566771] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.566855] msgmni has been set to 13745 [ 1.567334] alg: No test for stdrng (krng) [ 1.567383] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.567458] io scheduler noop registered [ 1.567462] io scheduler deadline registered [ 1.567520] io scheduler cfq registered (default) [ 1.567627] pcieport 0000:00:02.1: device [1022:1439] has invalid IRQ; check vendor BIOS [ 1.567800] pcieport 0000:00:02.4: device [1022:1439] has invalid IRQ; check vendor BIOS [ 1.567900] pcieport 0000:00:02.5: device [1022:1439] has invalid IRQ; check vendor BIOS [ 1.568043] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.568069] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.568151] GHES: HEST is not enabled! [ 1.568262] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.568849] Linux agpgart interface v0.103 [ 1.568996] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.589670] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.589677] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.589884] mousedev: PS/2 mouse device common for all mice [ 1.589943] rtc_cmos 00:01: RTC can wake from S4 [ 1.590064] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.590088] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs [ 1.590107] ledtrig-cpu: registered to indicate activity on CPUs [ 1.590499] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> [ 1.590501] AMD IOMMUv2 functionality not available on this system [ 1.590612] TCP: cubic registered [ 1.590728] NET: Registered protocol family 10 [ 1.591050] mip6: Mobile IPv6 [ 1.591055] NET: Registered protocol family 17 [ 1.591064] mpls_gso: MPLS GSO support [ 1.591513] registered taskstats version 1 [ 1.592190] rtc_cmos 00:01: setting system clock to 2015-11-02 20:23:32 UTC (1446495812) [ 1.592309] PM: Hibernation image not present or could not be loaded. [ 1.593714] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000) [ 1.593717] Write protecting the kernel read-only data: 8192k [ 1.597058] Freeing unused kernel memory: 924K (ffff880001719000 - ffff880001800000) [ 1.597820] Freeing unused kernel memory: 216K (ffff8800019ca000 - ffff880001a00000) [ 1.604530] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.609636] systemd-udevd[72]: starting version 215 [ 1.610108] random: systemd-udevd urandom read with 5 bits of entropy available [ 1.629932] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.629937] ACPI: Thermal Zone [TSZ0] (49 C) [ 1.630121] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.630125] ACPI: Thermal Zone [TSZ2] (20 C) [ 1.630623] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.630649] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.631473] r8169 0000:03:00.0: irq 72 for MSI/MSI-X [ 1.632000] ACPI: bus type USB registered [ 1.632053] usbcore: registered new interface driver usbfs [ 1.632074] usbcore: registered new interface driver hub [ 1.632382] usbcore: registered new device driver usb [ 1.632984] SCSI subsystem initialized [ 1.633734] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.633893] r8169 0000:03:00.0 eth0: RTL8106e at 0xffffc90000c7e000, 30:8d:99:c4:42:27, XID 04900000 IRQ 72 [ 1.634233] ehci-pci: EHCI PCI platform driver [ 1.634459] ehci-pci 0000:00:12.0: EHCI Host Controller [ 1.634469] sdhci: Secure Digital Host Controller Interface driver [ 1.634472] sdhci: Copyright(c) Pierre Ossman [ 1.634475] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.634485] ehci-pci 0000:00:12.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.634500] ehci-pci 0000:00:12.0: debug port 2 [ 1.634557] ehci-pci 0000:00:12.0: irq 18, io mem 0xf0d6e000 [ 1.636400] libata version 3.00 loaded. [ 1.644170] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00 [ 1.644310] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.644315] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.644319] usb usb1: Product: EHCI Host Controller [ 1.644322] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd [ 1.644326] usb usb1: SerialNumber: 0000:00:12.0 [ 1.644591] hub 1-0:1.0: USB hub found [ 1.644616] hub 1-0:1.0: 2 ports detected [ 1.645030] ehci-pci 0000:00:13.0: EHCI Host Controller [ 1.645042] ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 1.645052] ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.645066] ehci-pci 0000:00:13.0: debug port 2 [ 1.645108] ehci-pci 0000:00:13.0: irq 18, io mem 0xf0d6d000 [ 1.656326] ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00 [ 1.656596] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.656600] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.656604] usb usb2: Product: EHCI Host Controller [ 1.656607] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd [ 1.656610] usb usb2: SerialNumber: 0000:00:13.0 [ 1.656885] hub 2-0:1.0: USB hub found [ 1.656908] hub 2-0:1.0: 2 ports detected [ 1.657332] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 1.657344] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3 [ 1.657572] xhci_hcd 0000:00:10.0: irq 73 for MSI/MSI-X [ 1.657581] xhci_hcd 0000:00:10.0: irq 74 for MSI/MSI-X [ 1.657588] xhci_hcd 0000:00:10.0: irq 75 for MSI/MSI-X [ 1.657594] xhci_hcd 0000:00:10.0: irq 76 for MSI/MSI-X [ 1.657600] xhci_hcd 0000:00:10.0: irq 77 for MSI/MSI-X [ 1.657819] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.657823] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.657827] usb usb3: Product: xHCI Host Controller [ 1.657830] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd [ 1.657833] usb usb3: SerialNumber: 0000:00:10.0 [ 1.658051] hub 3-0:1.0: USB hub found [ 1.658070] hub 3-0:1.0: 2 ports detected [ 1.658266] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 1.658272] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4 [ 1.660968] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.660972] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.660975] usb usb4: Product: xHCI Host Controller [ 1.660977] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd [ 1.660980] usb usb4: SerialNumber: 0000:00:10.0 [ 1.661251] hub 4-0:1.0: USB hub found [ 1.661266] hub 4-0:1.0: 2 ports detected [ 1.661464] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1) [ 1.661618] mmc0: no vqmmc regulator found [ 1.661620] mmc0: no vmmc regulator found [ 1.661794] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA [ 1.662166] ahci 0000:00:11.0: version 3.0 [ 1.662305] ahci 0000:00:11.0: irq 78 for MSI/MSI-X [ 1.662364] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.662370] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part [ 1.956160] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.020462] scsi0 : ahci [ 2.020676] scsi1 : ahci [ 2.020766] ata1: SATA max UDMA/133 abar m1024@0xf0d6f000 port 0xf0d6f100 irq 78 [ 2.020771] ata2: SATA max UDMA/133 abar m1024@0xf0d6f000 port 0xf0d6f180 irq 78 [ 2.088334] usb 1-1: New USB device found, idVendor=0438, idProduct=7900 [ 2.088340] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.088617] hub 1-1:1.0: USB hub found [ 2.088698] hub 1-1:1.0: 4 ports detected [ 2.199980] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.332193] usb 2-1: New USB device found, idVendor=0438, idProduct=7900 [ 2.332200] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.332614] hub 2-1:1.0: USB hub found [ 2.332685] hub 2-1:1.0: 4 ports detected [ 2.420109] usb 1-1.4: new full-speed USB device number 3 using ehci-pci [ 2.511672] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.511703] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.516620] ata2.00: ATAPI: hp DVDRW SU208GB, HH00, max UDMA/100 [ 2.517904] ata1.00: ATA-9: ST1000LM024 HN-M101MBB, 2BA30001, max UDMA/133 [ 2.517911] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.522142] ata2.00: configured for UDMA/100 [ 2.524201] ata1.00: configured for UDMA/133 [ 2.524481] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0001 PQ: 0 ANSI: 5 [ 2.528459] usb 1-1.4: No LPM exit latency info found, disabling LPM. [ 2.528986] scsi 1:0:0:0: CD-ROM hp DVDRW SU208GB HH00 PQ: 0 ANSI: 5 [ 2.530588] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=b006 [ 2.530592] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.530595] usb 1-1.4: Product: Bluetooth Radio [ 2.530598] usb 1-1.4: Manufacturer: Realtek [ 2.530601] usb 1-1.4: SerialNumber: 00e04c000001 [ 2.539861] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.539867] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.539984] sd 0:0:0:0: [sda] Write Protect is off [ 2.539988] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.540035] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.553811] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.553819] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.554111] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.555062] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.555190] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.555525] tsc: Refined TSC clocksource calibration: 2195.882 MHz [ 2.600641] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 [ 2.601561] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.603596] usb 2-1.1: new high-speed USB device number 3 using ehci-pci [ 2.720476] usb 2-1.1: New USB device found, idVendor=04f2, idProduct=b509 [ 2.720482] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.720485] usb 2-1.1: Product: HP Truevision HD [ 2.720488] usb 2-1.1: Manufacturer: SunplusIT Inc [ 3.555116] Switched to clocksource tsc [ 3.733887] PM: Starting manual resume from disk [ 3.733895] PM: Hibernation image partition 8:9 present [ 3.733897] PM: Looking for hibernation image. [ 3.734094] PM: Image not found (code -22) [ 3.734096] PM: Hibernation image not present or could not be loaded. [ 3.898260] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 4.007749] random: nonblocking pool is initialized [ 4.428997] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time. [ 6.442494] lp: driver loaded but no devices found [ 6.478812] ppdev: user-space parallel port driver [ 6.591104] fuse init (API version 7.23) [ 6.717767] systemd-udevd[186]: starting version 215 [ 7.887917] ACPI: acpi_idle registered with cpuidle [ 7.902438] acpi-cpufreq: overriding BIOS provided _PSD data [ 7.932288] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 7.932297] ACPI: Power Button [PWRB] [ 7.932403] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3 [ 7.932467] ACPI: Lid Switch [LID] [ 7.932539] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 7.932543] ACPI: Power Button [PWRF] [ 7.969472] Initializing HPQ6001 module [ 7.969589] input: HP Wireless hotkeys as /devices/virtual/input/input5 [ 7.995985] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 7.996025] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 8.028394] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.041463] acpi device:00: registered as cooling_device4 [ 8.041554] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 8.042110] wmi: Mapper loaded [ 8.113253] AMD Cryptographic Coprocessor 0000:00:08.0: 4 command queues available [ 8.113322] AMD Cryptographic Coprocessor 0000:00:08.0: irq 79 for MSI/MSI-X [ 8.113339] AMD Cryptographic Coprocessor 0000:00:08.0: irq 80 for MSI/MSI-X [ 8.113939] AMD Cryptographic Coprocessor 0000:00:08.0: enabled [ 8.176026] EDAC MC: Ver: 3.0.0 [ 8.185782] MCE: In-kernel MCE decoding enabled. [ 8.186797] AMD64 EDAC driver v3.4.0 [ 8.186870] EDAC amd64: DRAM ECC disabled. [ 8.186891] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.259855] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro [ 8.296347] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\_SB_.PCI0.SMBS.SMB0) (20140424/utaddress-258) [ 8.296362] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.379910] ACPI: Battery Slot [BAT1] (battery present) [ 8.401312] ACPI: AC Adapter [ACAD] (on-line) [ 8.582257] EFI Variables Facility v0.08 2004-May-17 [ 8.803385] [drm] Initialized drm 1.1.0 20060810 [ 8.839612] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 8.839665] pstore: Registered efi as persistent store backend [ 8.944307] cfg80211: Calling CRDA to update world regulatory domain [ 9.668213] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846] [ 9.684320] Bluetooth: Core ver 2.19 [ 9.684388] NET: Registered protocol family 31 [ 9.684394] Bluetooth: HCI device and connection manager initialized [ 9.684415] Bluetooth: HCI socket layer initialized [ 9.684423] Bluetooth: L2CAP socket layer initialized [ 9.684451] Bluetooth: SCO socket layer initialized [ 9.698106] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..] [ 9.756293] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800, board id: 3127, fw id: 8526786 [ 9.793646] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 9.796275] rtl8723be: unknown parameter 'disable_watchdog' ignored [ 9.818521] rtl8723be: Using firmware rtlwifi/rtl8723befw.bin [ 9.932271] rtl8723be 0000:02:00.0: firmware: direct-loading firmware rtlwifi/rtl8723befw.bin [ 10.039203] usbcore: registered new interface driver btusb [ 10.164282] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 10.164570] rtlwifi: wireless switch is on [ 10.207763] [drm] radeon kernel modesetting enabled. [ 10.207855] checking generic (e0000000 420000) vs hw (e0000000 10000000) [ 10.207857] fb: switching to radeondrmfb from simple [ 10.207909] Console: switching to colour dummy device 80x25 [ 10.208364] [drm] initializing kernel modesetting (MULLINS 0x1002:0x9851 0x103C:0x80CB). [ 10.208382] [drm] register mmio base: 0xF0D00000 [ 10.208384] [drm] register mmio size: 262144 [ 10.208390] [drm] doorbell mmio base: 0xF0000000 [ 10.208392] [drm] doorbell mmio size: 8388608 [ 10.208398] [drm] ACPI VFCT contains a BIOS for 00:01.0 1002:9851, size 60416 [ 10.208430] ATOM BIOS: AMD [ 10.208532] radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 10.208536] radeon 0000:00:01.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 10.208538] [drm] Detected VRAM RAM=1024M, BAR=256M [ 10.208540] [drm] RAM width 128bits DDR [ 10.208628] [TTM] Zone kernel: Available graphics memory: 3520026 kiB [ 10.208631] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 10.208633] [TTM] Initializing pool allocator [ 10.208640] [TTM] Initializing DMA pool allocator [ 10.208673] [drm] radeon: 1024M of VRAM memory ready [ 10.208675] [drm] radeon: 1024M of GTT memory ready. [ 10.208693] [drm] Loading MULLINS Microcode [ 10.342557] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/MULLINS_pfp.bin [ 10.399001] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/MULLINS_me.bin [ 10.429571] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/MULLINS_ce.bin [ 10.466461] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/MULLINS_mec.bin [ 10.490351] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/MULLINS_rlc.bin [ 10.684759] media: Linux media interface: v0.10 [ 10.694786] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/MULLINS_sdma.bin [ 10.694823] [drm] Internal thermal controller without fan control [ 10.696697] [drm] radeon: dpm initialized [ 10.772395] Linux video capture interface: v2.00 [ 10.932001] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/BONAIRE_uvd.bin [ 10.958514] AVX version of gcm_enc/dec engaged. [ 10.963765] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 11.018854] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/BONAIRE_vce.bin [ 11.022676] [drm] Found VCE firmware/feedback version 40.2.2 / 15! [ 11.022723] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 11.044516] [drm] PCIE GART of 1024M enabled (table at 0x000000000078B000). [ 11.044712] radeon 0000:00:01.0: WB enabled [ 11.044740] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880214ad7c00 [ 11.044744] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff880214ad7c04 [ 11.044747] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff880214ad7c08 [ 11.044750] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880214ad7c0c [ 11.044753] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff880214ad7c10 [ 11.045372] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc900050b6c98 [ 11.045445] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xffff880214ad7c18 [ 11.045448] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xffff880214ad7c1c [ 11.045452] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 11.045454] [drm] Driver supports precise vblank timestamp query. [ 11.045483] radeon 0000:00:01.0: irq 81 for MSI/MSI-X [ 11.045502] radeon 0000:00:01.0: radeon: using MSI. [ 11.045561] [drm] radeon: irq initialized. [ 11.049251] [drm] ring test on 0 succeeded in 2 usecs [ 11.049334] [drm] ring test on 1 succeeded in 2 usecs [ 11.049352] [drm] ring test on 2 succeeded in 2 usecs [ 11.049490] [drm] ring test on 3 succeeded in 4 usecs [ 11.049497] [drm] ring test on 4 succeeded in 4 usecs [ 11.085313] [drm] ring test on 5 succeeded in 1 usecs [ 11.085342] [drm] UVD initialized successfully. [ 11.169744] input: HP WMI hotkeys as /devices/virtual/input/input9 [ 11.194576] [drm] ring test on 6 succeeded in 12 usecs [ 11.194590] [drm] ring test on 7 succeeded in 2 usecs [ 11.194591] [drm] VCE initialized successfully. [ 11.195207] [drm] ib test on ring 0 succeeded in 0 usecs [ 11.195353] [drm] ib test on ring 1 succeeded in 0 usecs [ 11.195509] [drm] ib test on ring 2 succeeded in 0 usecs [ 11.195663] [drm] ib test on ring 3 succeeded in 0 usecs [ 11.195814] [drm] ib test on ring 4 succeeded in 0 usecs [ 11.196549] [drm] ib test on ring 5 succeeded [ 11.197141] [drm] ib test on ring 6 succeeded [ 11.197636] [drm] ib test on ring 7 succeeded [ 11.199146] [drm] radeon atom DIG backlight initialized [ 11.199152] [drm] Radeon Display Connectors [ 11.199155] [drm] Connector 0: [ 11.199158] [drm] eDP-1 [ 11.199160] [drm] HPD1 [ 11.199165] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [ 11.199167] [drm] Encoders: [ 11.199170] [drm] LCD1: INTERNAL_UNIPHY [ 11.199173] [drm] Connector 1: [ 11.199175] [drm] HDMI-A-1 [ 11.199177] [drm] HPD2 [ 11.199181] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c [ 11.199183] [drm] Encoders: [ 11.199185] [drm] DFP1: INTERNAL_UNIPHY [ 11.199187] [drm] Connector 2: [ 11.199190] [drm] VGA-1 [ 11.199193] [drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc [ 11.199195] [drm] Encoders: [ 11.199198] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 11.486845] alg: No test for crc32 (crc32-pclmul) [ 11.562818] [drm] fb mappable at 0xE098F000 [ 11.562828] [drm] vram apper at 0xE0000000 [ 11.562832] [drm] size 4325376 [ 11.562836] [drm] fb depth is 24 [ 11.562839] [drm] pitch is 5632 [ 11.563123] fbcon: radeondrmfb (fb0) is primary device [ 11.774472] kvm: Nested Virtualization enabled [ 11.774477] kvm: Nested Paging enabled [ 11.880352] uvcvideo: Found UVC 1.00 device HP Truevision HD (04f2:b509) [ 11.888468] input: HP Truevision HD as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input10 [ 11.888702] usbcore: registered new interface driver uvcvideo [ 11.888703] USB Video Class driver (1.1.1) [ 12.059134] Console: switching to colour frame buffer device 170x48 [ 12.069466] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device [ 12.069472] radeon 0000:00:01.0: registered panic notifier [ 12.105882] [drm] Initialized radeon 2.39.0 20080528 for 0000:00:01.0 on minor 0 [ 12.107313] snd_hda_intel 0000:00:01.1: irq 82 for MSI/MSI-X [ 12.107428] snd_hda_intel 0000:00:14.2: irq 83 for MSI/MSI-X [ 12.183576] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input11 [ 12.197766] sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 12.197777] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 12.197784] sound hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 12.197788] sound hdaudioC1D0: mono: mono_out=0x0 [ 12.197792] sound hdaudioC1D0: inputs: [ 12.197797] sound hdaudioC1D0: Mic=0x19 [ 12.197802] sound hdaudioC1D0: Internal Mic=0x12 [ 12.208283] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/hdaudioC1D0/input12 [ 12.208579] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input13 [ 12.208679] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input14 [ 12.416144] cfg80211: World regulatory domain updated: [ 12.416158] cfg80211: DFS Master region: unset [ 12.416163] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 12.416172] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 12.416178] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 12.416184] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 12.416191] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 12.416198] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 12.416204] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 12.416209] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 12.416215] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 12.794838] Adding 7283708k swap on /dev/sda9. Priority:-1 extents:1 across:7283708k FS [ 14.398014] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 14.688979] systemd-journald[173]: Received request to flush runtime journal from PID 1 [ 15.722053] RPC: Registered named UNIX socket transport module. [ 15.722059] RPC: Registered udp transport module. [ 15.722061] RPC: Registered tcp transport module. [ 15.722063] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 15.751767] FS-Cache: Loaded [ 15.785581] FS-Cache: Netfs 'nfs' registered for caching [ 15.825848] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 21.972904] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.972914] Bluetooth: BNEP filters: protocol multicast [ 21.972931] Bluetooth: BNEP socket layer initialized [ 24.018896] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8106e-1.fw [ 24.189646] r8169 0000:03:00.0 eth0: link down [ 24.189767] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.665957] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 26.067148] wlan0: authenticate with e0:91:53:0a:4e:7b [ 26.077244] wlan0: send auth to e0:91:53:0a:4e:7b (try 1/3) [ 26.079481] wlan0: authenticated [ 26.079785] rtl8723be 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 26.079790] rtl8723be 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 26.079793] rtl8723be 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 26.083111] wlan0: associate with e0:91:53:0a:4e:7b (try 1/3) [ 26.085468] wlan0: RX AssocResp from e0:91:53:0a:4e:7b (capab=0x431 status=0 aid=5) [ 26.085559] wlan0: associated [ 26.085575] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 26.085709] cfg80211: Calling CRDA for country: ES [ 26.090327] cfg80211: Regulatory domain changed to country: ES [ 26.090334] cfg80211: DFS Master region: ETSI [ 26.090337] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 26.090341] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 26.090345] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2301 mBm), (N/A) [ 26.090348] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 26.090351] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [ 26.090354] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 311.026026] wlan0: Connection to AP e0:91:53:0a:4e:7b lost [ 311.056629] cfg80211: Calling CRDA to update world regulatory domain [ 311.064235] cfg80211: World regulatory domain updated: [ 311.064245] cfg80211: DFS Master region: unset [ 311.064250] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 311.064258] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 311.064264] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 311.064270] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 311.064277] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 311.064284] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 311.064290] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 311.064296] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 311.064301] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 314.613468] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 315.065127] r8169 0000:03:00.0 eth0: link down [ 315.065253] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 351.819073] wlan0: authenticate with e0:91:53:0a:4e:7b [ 351.829372] wlan0: send auth to e0:91:53:0a:4e:7b (try 1/3) [ 351.831228] wlan0: authenticated [ 351.831530] rtl8723be 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 351.831535] rtl8723be 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 351.831539] rtl8723be 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 351.834119] wlan0: associate with e0:91:53:0a:4e:7b (try 1/3) [ 351.836443] wlan0: RX AssocResp from e0:91:53:0a:4e:7b (capab=0x431 status=0 aid=5) [ 351.836524] wlan0: associated [ 351.836575] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 351.836642] cfg80211: Calling CRDA for country: ES [ 351.841673] cfg80211: Regulatory domain changed to country: ES [ 351.841682] cfg80211: DFS Master region: ETSI [ 351.841685] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 351.841689] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 351.841693] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2301 mBm), (N/A) [ 351.841696] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 351.841700] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [ 351.841702] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 430.750018] wlan0: Connection to AP e0:91:53:0a:4e:7b lost [ 430.843820] cfg80211: Calling CRDA to update world regulatory domain [ 430.851925] cfg80211: World regulatory domain updated: [ 430.851938] cfg80211: DFS Master region: unset [ 430.851943] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 430.851955] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 430.851961] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 430.851967] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 430.851974] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 430.851981] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 430.851987] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 430.851993] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 430.851999] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 431.508352] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 431.935044] r8169 0000:03:00.0 eth0: link down [ 431.935169] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 432.846022] wlan0: authenticate with e0:91:53:0a:4e:7b [ 432.856149] wlan0: send auth to e0:91:53:0a:4e:7b (try 1/3) [ 432.957184] wlan0: send auth to e0:91:53:0a:4e:7b (try 2/3) [ 433.061076] wlan0: send auth to e0:91:53:0a:4e:7b (try 3/3) [ 433.165023] wlan0: authentication with e0:91:53:0a:4e:7b timed out [ 439.957567] wlan0: authenticate with e0:91:53:0a:4e:7b [ 439.976640] wlan0: send auth to e0:91:53:0a:4e:7b (try 1/3) [ 439.979460] wlan0: authenticated [ 439.979964] rtl8723be 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 439.979971] rtl8723be 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 439.979975] rtl8723be 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 439.980181] wlan0: associate with e0:91:53:0a:4e:7b (try 1/3) [ 439.982512] wlan0: RX AssocResp from e0:91:53:0a:4e:7b (capab=0x431 status=0 aid=5) [ 439.982614] wlan0: associated [ 439.982641] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 439.982857] cfg80211: Calling CRDA for country: ES [ 439.989511] cfg80211: Regulatory domain changed to country: ES [ 439.989521] cfg80211: DFS Master region: ETSI [ 439.989526] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 439.989533] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 439.989541] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2301 mBm), (N/A) [ 439.989548] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 439.989554] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [ 439.989559] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 627.091026] r8169 0000:03:00.0 eth0: link up [ 627.091043] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1190.480063] wlan0: Connection to AP e0:91:53:0a:4e:7b lost [ 1190.524583] cfg80211: Calling CRDA to update world regulatory domain [ 1190.532203] cfg80211: World regulatory domain updated: [ 1190.532214] cfg80211: DFS Master region: unset [ 1190.532219] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 1190.532227] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1190.532233] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1190.532239] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 1190.532246] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 1190.532253] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 1190.532259] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 1190.532264] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 1190.532269] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 1226.440844] wlan0: authenticate with e0:91:53:0a:4e:7b [ 1226.459869] wlan0: send auth to e0:91:53:0a:4e:7b (try 1/3) [ 1226.563572] wlan0: send auth to e0:91:53:0a:4e:7b (try 2/3) [ 1226.667496] wlan0: send auth to e0:91:53:0a:4e:7b (try 3/3) [ 1226.771427] wlan0: authentication with e0:91:53:0a:4e:7b timed out [ 1251.479334] wlan0: authenticate with e0:91:53:0a:4e:7b [ 1251.498436] wlan0: send auth to e0:91:53:0a:4e:7b (try 1/3) [ 1251.601981] wlan0: send auth to e0:91:53:0a:4e:7b (try 2/3) [ 1251.705889] wlan0: send auth to e0:91:53:0a:4e:7b (try 3/3) [ 1251.809829] wlan0: authentication with e0:91:53:0a:4e:7b timed out [ 4434.763342] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). [ 4434.763357] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. [ 4434.771631] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). [ 4434.771646] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. [ 4435.193565] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4440.327214] PM: Syncing filesystems ... done. [ 4440.613159] PM: Preparing system for mem sleep [ 4441.521179] (NULL device *): firmware: direct-loading firmware rtlwifi/rtl8723befw.bin [ 4441.521195] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 4441.523048] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 4441.524246] PM: Entering mem sleep [ 4441.524588] Suspending console(s) (use no_console_suspend to debug) [ 4441.525281] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 4441.544407] sd 0:0:0:0: [sda] Stopping disk [ 4442.627814] PM: suspend of devices complete after 1103.626 msecs [ 4442.628583] PM: late suspend of devices complete after 0.762 msecs [ 4442.629386] r8169 0000:03:00.0: System wakeup enabled by ACPI [ 4442.629490] ehci-pci 0000:00:13.0: System wakeup enabled by ACPI [ 4442.629522] ehci-pci 0000:00:12.0: System wakeup enabled by ACPI [ 4442.629555] xhci_hcd 0000:00:10.0: System wakeup enabled by ACPI [ 4442.643960] PM: noirq suspend of devices complete after 15.375 msecs [ 4442.644021] ACPI: Preparing to enter system sleep state S3 [ 4442.650595] PM: Saving platform NVS memory [ 4442.656001] Disabling non-boot CPUs ... [ 4442.657630] kvm: disabling virtualization on CPU1 [ 4442.759468] smpboot: CPU 1 is now offline [ 4442.761669] kvm: disabling virtualization on CPU2 [ 4442.863473] smpboot: CPU 2 is now offline [ 4442.865210] kvm: disabling virtualization on CPU3 [ 4442.967333] smpboot: CPU 3 is now offline [ 4442.968087] ACPI: Low-level resume complete [ 4442.968131] PM: Restoring platform NVS memory [ 4442.969570] LVT offset 0 assigned for vector 0x400 [ 4442.969734] Enabling non-boot CPUs ... [ 4442.969886] x86: Booting SMP configuration: [ 4442.969888] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 4442.987826] kvm: enabling virtualization on CPU1 [ 4442.990250] CPU1 is up [ 4442.990354] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 4443.008311] kvm: enabling virtualization on CPU2 [ 4443.010660] CPU2 is up [ 4443.010781] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 4443.028731] kvm: enabling virtualization on CPU3 [ 4443.031112] CPU3 is up [ 4443.032244] ACPI: Waking up from system sleep state S3 [ 4443.049487] xhci_hcd 0000:00:10.0: System wakeup disabled by ACPI [ 4443.049880] ehci-pci 0000:00:13.0: System wakeup disabled by ACPI [ 4443.049915] ehci-pci 0000:00:12.0: System wakeup disabled by ACPI [ 4443.050050] PM: noirq resume of devices complete after 15.359 msecs [ 4443.050394] PM: early resume of devices complete after 0.300 msecs [ 4443.050540] snd_hda_intel 0000:00:01.1: irq 82 for MSI/MSI-X [ 4443.050859] snd_hda_intel 0000:00:14.2: irq 83 for MSI/MSI-X [ 4443.051584] rtlwifi: wireless switch is on [ 4443.051631] r8169 0000:03:00.0: System wakeup disabled by ACPI [ 4443.052224] sd 0:0:0:0: [sda] Starting disk [ 4443.065639] [drm] PCIE GART of 1024M enabled (table at 0x000000000078B000). [ 4443.066187] radeon 0000:00:01.0: WB enabled [ 4443.066256] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880214ad7c00 [ 4443.066258] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff880214ad7c04 [ 4443.066260] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff880214ad7c08 [ 4443.066262] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880214ad7c0c [ 4443.066264] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff880214ad7c10 [ 4443.066831] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc900050b6c98 [ 4443.066890] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xffff880214ad7c18 [ 4443.066893] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xffff880214ad7c1c [ 4443.069106] [drm] ring test on 0 succeeded in 3 usecs [ 4443.069171] [drm] ring test on 1 succeeded in 2 usecs [ 4443.069181] [drm] ring test on 2 succeeded in 2 usecs [ 4443.069317] [drm] ring test on 3 succeeded in 4 usecs [ 4443.069324] [drm] ring test on 4 succeeded in 4 usecs [ 4443.105061] [drm] ring test on 5 succeeded in 1 usecs [ 4443.105077] [drm] UVD initialized successfully. [ 4443.214159] [drm] ring test on 6 succeeded in 6 usecs [ 4443.214166] [drm] ring test on 7 succeeded in 2 usecs [ 4443.214167] [drm] VCE initialized successfully. [ 4443.214326] [drm] ib test on ring 0 succeeded in 0 usecs [ 4443.214480] [drm] ib test on ring 1 succeeded in 0 usecs [ 4443.214630] [drm] ib test on ring 2 succeeded in 0 usecs [ 4443.214779] [drm] ib test on ring 3 succeeded in 0 usecs [ 4443.214936] [drm] ib test on ring 4 succeeded in 0 usecs [ 4443.215701] [drm] ib test on ring 5 succeeded [ 4443.216413] [drm] ib test on ring 6 succeeded [ 4443.216885] [drm] ib test on ring 7 succeeded [ 4443.241261] r8169 0000:03:00.0 eth0: link down [ 4443.285071] usb 2-1.1: reset high-speed USB device number 3 using ehci-pci [ 4443.297081] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci [ 4443.397338] usb 1-1.4: No LPM exit latency info found, disabling LPM. [ 4443.772608] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4443.783079] ata2.00: configured for UDMA/100 [ 4443.887377] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846] [ 4443.916447] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..] [ 4444.388567] PM: resume of devices complete after 1339.104 msecs [ 4444.389693] PM: Finishing wakeup. [ 4444.389695] Restarting tasks ... done. [ 4444.870005] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4445.051737] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4445.063984] ata1.00: configured for UDMA/133 [ 4445.416527] r8169 0000:03:00.0 eth0: link down [ 4445.416623] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4445.894388] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4446.096160] r8169 0000:03:00.0 eth0: link down [ 4446.096275] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4446.861007] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4447.303326] r8169 0000:03:00.0 eth0: link down [ 4447.303505] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4448.945364] r8169 0000:03:00.0 eth0: link up [ 4448.945389] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 4546.811254] wlan0: authenticate with e0:91:53:0a:4e:7b [ 4546.821360] wlan0: send auth to e0:91:53:0a:4e:7b (try 1/3) [ 4546.823253] wlan0: authenticated [ 4546.823669] rtl8723be 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 4546.823674] rtl8723be 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 4546.823684] rtl8723be 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 4546.824230] wlan0: associate with e0:91:53:0a:4e:7b (try 1/3) [ 4546.826517] wlan0: RX AssocResp from e0:91:53:0a:4e:7b (capab=0x431 status=0 aid=5) [ 4546.826597] wlan0: associated [ 4546.826645] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 4546.826720] cfg80211: Calling CRDA for country: ES [ 4546.832440] cfg80211: Regulatory domain changed to country: ES [ 4546.832447] cfg80211: DFS Master region: ETSI [ 4546.832450] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 4546.832455] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 4546.832459] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2301 mBm), (N/A) [ 4546.832464] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 4546.832468] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [ 4546.832471] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 4589.037739] wlan0: Connection to AP e0:91:53:0a:4e:7b lost [ 4589.142776] cfg80211: Calling CRDA to update world regulatory domain [ 4589.150392] cfg80211: World regulatory domain updated: [ 4589.150445] cfg80211: DFS Master region: unset [ 4589.150450] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 4589.150459] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 4589.150483] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 4589.150492] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 4589.150499] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 4589.150505] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 4589.150511] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 4589.150517] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 4589.150522] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 4590.038989] wlan0: authenticate with e0:91:53:0a:4e:7b [ 4590.058298] wlan0: send auth to e0:91:53:0a:4e:7b (try 1/3) [ 4590.161858] wlan0: send auth to e0:91:53:0a:4e:7b (try 2/3) [ 4590.265787] wlan0: send auth to e0:91:53:0a:4e:7b (try 3/3) [ 4590.369712] wlan0: authentication with e0:91:53:0a:4e:7b timed out [ 4603.405438] wlan0: authenticate with e0:91:53:0a:4e:7b [ 4603.424884] wlan0: direct probe to e0:91:53:0a:4e:7b (try 1/3) [ 4603.628343] wlan0: direct probe to e0:91:53:0a:4e:7b (try 2/3) [ 4603.832185] wlan0: direct probe to e0:91:53:0a:4e:7b (try 3/3) [ 4604.036108] wlan0: authentication with e0:91:53:0a:4e:7b timed out [ 6964.161749] wlan0: authenticate with e0:91:53:0a:4e:7b [ 6964.171870] wlan0: send auth to e0:91:53:0a:4e:7b (try 1/3) [ 6964.174890] wlan0: authenticated [ 6964.175251] rtl8723be 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 6964.175255] rtl8723be 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 6964.175258] rtl8723be 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 6964.177671] wlan0: associate with e0:91:53:0a:4e:7b (try 1/3) [ 6964.180125] wlan0: RX AssocResp from e0:91:53:0a:4e:7b (capab=0x431 status=0 aid=5) [ 6964.180227] wlan0: associated [ 6964.180316] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 6964.180430] cfg80211: Calling CRDA for country: ES [ 6964.188383] cfg80211: Regulatory domain changed to country: ES [ 6964.188394] cfg80211: DFS Master region: ETSI [ 6964.188399] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 6964.188406] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 6964.188414] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2301 mBm), (N/A) [ 6964.188421] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 6964.188427] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [ 6964.188433] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 7142.343607] wlan0: Connection to AP e0:91:53:0a:4e:7b lost [ 7142.387830] cfg80211: Calling CRDA to update world regulatory domain [ 7142.395538] cfg80211: World regulatory domain updated: [ 7142.395549] cfg80211: DFS Master region: unset [ 7142.395553] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 7142.395561] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 7142.395567] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 7142.395573] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 7142.395580] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 7142.395587] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 7142.395593] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 7142.395598] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 7142.395604] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 7143.300817] wlan0: authenticate with e0:91:53:0a:4e:7b [ 7143.320144] wlan0: send auth to e0:91:53:0a:4e:7b (try 1/3) [ 7143.423639] wlan0: send auth to e0:91:53:0a:4e:7b (try 2/3) [ 7143.527637] wlan0: send auth to e0:91:53:0a:4e:7b (try 3/3) [ 7143.631531] wlan0: authentication with e0:91:53:0a:4e:7b timed out [ 7628.677629] wlan0: authenticate with e0:91:53:0a:4e:7b [ 7628.687736] wlan0: send auth to e0:91:53:0a:4e:7b (try 1/3) [ 7628.690506] wlan0: authenticated [ 7628.691076] rtl8723be 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 7628.691085] rtl8723be 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 7628.691092] rtl8723be 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 7628.694703] wlan0: associate with e0:91:53:0a:4e:7b (try 1/3) [ 7628.697004] wlan0: RX AssocResp from e0:91:53:0a:4e:7b (capab=0x431 status=0 aid=5) [ 7628.697099] wlan0: associated [ 7628.697174] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 7628.697282] cfg80211: Calling CRDA for country: ES [ 7628.704594] cfg80211: Regulatory domain changed to country: ES [ 7628.704602] cfg80211: DFS Master region: ETSI [ 7628.704606] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 7628.704612] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 7628.704617] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2301 mBm), (N/A) [ 7628.704623] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 7628.704627] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [ 7628.704632] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 7743.121430] wlan0: Connection to AP e0:91:53:0a:4e:7b lost [ 7743.182420] cfg80211: Calling CRDA to update world regulatory domain [ 7743.190214] cfg80211: World regulatory domain updated: [ 7743.190224] cfg80211: DFS Master region: unset [ 7743.190228] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 7743.190236] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 7743.190242] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 7743.190248] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 7743.190256] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 7743.190263] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 7743.190269] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 7743.190274] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 7743.190280] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 7744.078658] wlan0: authenticate with e0:91:53:0a:4e:7b [ 7744.097907] wlan0: send auth to e0:91:53:0a:4e:7b (try 1/3) [ 7744.201546] wlan0: send auth to e0:91:53:0a:4e:7b (try 2/3) [ 7744.305478] wlan0: send auth to e0:91:53:0a:4e:7b (try 3/3) [ 7744.409386] wlan0: authentication with e0:91:53:0a:4e:7b timed out [ 8167.278749] wlan0: authenticate with e0:91:53:0a:4e:7b [ 8167.288882] wlan0: send auth to e0:91:53:0a:4e:7b (try 1/3) [ 8167.291456] wlan0: authenticated [ 8167.291826] rtl8723be 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 8167.291830] rtl8723be 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 8167.291833] rtl8723be 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 8167.292111] wlan0: associate with e0:91:53:0a:4e:7b (try 1/3) [ 8167.294503] wlan0: RX AssocResp from e0:91:53:0a:4e:7b (capab=0x431 status=0 aid=5) [ 8167.294590] wlan0: associated [ 8167.294657] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 8167.294737] cfg80211: Calling CRDA for country: ES [ 8167.299649] cfg80211: Regulatory domain changed to country: ES [ 8167.299655] cfg80211: DFS Master region: ETSI [ 8167.299657] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 8167.299660] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 8167.299663] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2301 mBm), (N/A) [ 8167.299666] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 8167.299668] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [ 8167.299671] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 8876.588934] wlan0: Connection to AP e0:91:53:0a:4e:7b lost [ 8876.653368] cfg80211: Calling CRDA to update world regulatory domain [ 8876.661069] cfg80211: World regulatory domain updated: [ 8876.661080] cfg80211: DFS Master region: unset [ 8876.661085] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 8876.661092] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 8876.661099] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 8876.661105] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 8876.661112] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 8876.661119] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 8876.661125] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 8876.661130] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 8876.661136] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 8877.566189] wlan0: authenticate with e0:91:53:0a:4e:7b [ 8877.585525] wlan0: send auth to e0:91:53:0a:4e:7b (try 1/3) [ 8877.588307] wlan0: authenticated [ 8877.588738] rtl8723be 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 8877.588743] rtl8723be 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 8877.588747] rtl8723be 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 8877.588993] wlan0: associate with e0:91:53:0a:4e:7b (try 1/3) [ 8877.591189] wlan0: RX AssocResp from e0:91:53:0a:4e:7b (capab=0x431 status=0 aid=5) [ 8877.591294] wlan0: associated [ 8877.591530] cfg80211: Calling CRDA for country: ES [ 8877.597655] cfg80211: Regulatory domain changed to country: ES [ 8877.597665] cfg80211: DFS Master region: ETSI [ 8877.597670] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 8877.597677] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 8877.597684] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2301 mBm), (N/A) [ 8877.597692] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 8877.597698] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [ 8877.597703] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 9335.182712] wlan0: Connection to AP e0:91:53:0a:4e:7b lost [ 9335.271643] cfg80211: Calling CRDA to update world regulatory domain [ 9335.279269] cfg80211: World regulatory domain updated: [ 9335.279280] cfg80211: DFS Master region: unset [ 9335.279285] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 9335.279293] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 9335.279300] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 9335.279306] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 9335.279312] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 9335.279319] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 9335.279325] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 9335.279331] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 9335.279336] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [10073.925931] wlan0: authenticate with e0:91:53:0a:4e:7b [10073.936086] wlan0: send auth to e0:91:53:0a:4e:7b (try 1/3) [10073.938314] wlan0: authenticated [10073.938650] rtl8723be 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [10073.938654] rtl8723be 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [10073.938657] rtl8723be 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [10073.940464] wlan0: associate with e0:91:53:0a:4e:7b (try 1/3) [10073.942972] wlan0: RX AssocResp from e0:91:53:0a:4e:7b (capab=0x431 status=0 aid=5) [10073.943078] wlan0: associated [10073.943170] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [10073.943299] cfg80211: Calling CRDA for country: ES [10073.950080] cfg80211: Regulatory domain changed to country: ES [10073.950090] cfg80211: DFS Master region: ETSI [10073.950095] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [10073.950103] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [10073.950110] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2301 mBm), (N/A) [10073.950117] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [10073.950123] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [10073.950129] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
--- End Message ---
--- Begin Message ---
- To: 803987-done@bugs.debian.org
- Subject: Re: Bug#803987: firmware-realtek: Very weak signal on RTL8723BE adaptor
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Sun, 27 Aug 2017 14:01:44 +0100
- Message-id: <1503838904.3688.79.camel@decadent.org.uk>
- In-reply-to: <87h99yrx1n.fsf@turtle.gmx.de>
- References: <20151103214836.4379.52030.reportbug@BB-8.azkarel.org> <87h99yrx1n.fsf@turtle.gmx.de>
On Fri, 02 Sep 2016 20:12:04 +0200 Sven Joachim <svenjoac@gmx.de> wrote: [...] > This is not really a problem of the firmware, but rather of the > hardware. Commit c18d8f5095715c56bb3cd9cba64242542632054b in the Linux > kernel tree gives an explanation: Therefore closing this. Ben. -- Ben Hutchings Teamwork is essential - it allows you to blame someone else.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---