Bug#872765: linux-image-4.13.0-rc5-amd64: cannot open audio mixer
Package: src:linux
Version: 4.13~rc5-1~exp1
Severity: normal
Dear Maintainer,
After upgrading from linux-image-4.12.0-1-amd64 to linux-image-4.13.0-rc5-amd64,
aumix will not work.
The following error appears while booting:
Linux hp425 4.13.0-rc5-amd64 #1 SMP Debian 4.13~rc5-1~exp1 (2017-08-14) x86_64 GNU/Linux
[FAIL] Restoring mixer settings...[....] failed. ... failed!
...
login: [ 22.327889] random: crng init done
And this error appears after running aumix (either as normal user or as root):
aumix: error opening mixer: No such file or directory
It is not possible to hear audio with this scenario.
I've installed alsa-utils, and alsamixer will do the job, but won't hear any audio after
switching back to aumix.
Downgrading to linux-image-4.12.0-1-amd64 will also solve the problem. That is, this
message will show while booting:
[ ok ] Restoring mixer settings... mixer mixer1[....] done..
and aumix will work as expected as normal user.
You will find dmesg's output below, but bear in mind that mixer settings restoring is
disabled (echo 'SAVEMIXER=no' > /etc/default/aumix).
Kindest regards,
Ricardo
-- Package-specific info:
** Version:
Linux version 4.13.0-rc5-amd64 (debian-kernel@lists.debian.org) (gcc version 6.4.0 20170805 (Debian 6.4.0-3)) #1 SMP Debian 4.13~rc5-1~exp1 (2017-08-14)
** Command line:
auto BOOT_IMAGE=Linux ro root=UUID=d83c21d8-53d3-46e2-8772-82e9dd92546c edd=off
** Tainted: W (512)
* Taint on warning.
** Kernel log:
[ 0.000000] random: get_random_bytes called from start_kernel+0x3d/0x456 with crng_init=0
[ 0.000000] Linux version 4.13.0-rc5-amd64 (debian-kernel@lists.debian.org) (gcc version 6.4.0 20170805 (Debian 6.4.0-3)) #1 SMP Debian 4.13~rc5-1~exp1 (2017-08-14)
[ 0.000000] Command line: auto BOOT_IMAGE=Linux ro root=UUID=d83c21d8-53d3-46e2-8772-82e9dd92546c edd=off
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000ef000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000afceffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000afcf0000-0x00000000afdcefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000afdcf000-0x00000000afecefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000afecf000-0x00000000afefefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000afeff000-0x00000000afefffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP 425/1475, BIOS 68DVA Ver. F.03 08/13/2010
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 0000A0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 000100000000 mask FFFFC0000000 write-back
[ 0.000000] 4 base 0000FFE00000 mask FFFFFFE00000 write-protect
[ 0.000000] 5 base 0000FFF40000 mask FFFFFFFF0000 write-protect
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000140000000 aka 5120M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xaff00 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff94a500099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x12c357000, 0x12c357fff] PGTABLE
[ 0.000000] BRK [0x12c358000, 0x12c358fff] PGTABLE
[ 0.000000] BRK [0x12c359000, 0x12c359fff] PGTABLE
[ 0.000000] BRK [0x12c35a000, 0x12c35afff] PGTABLE
[ 0.000000] BRK [0x12c35b000, 0x12c35bfff] PGTABLE
[ 0.000000] BRK [0x12c35c000, 0x12c35cfff] PGTABLE
[ 0.000000] BRK [0x12c35d000, 0x12c35dfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7ff38000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F2AA0 000014 (v00 HPQOEM)
[ 0.000000] ACPI: RSDT 0x00000000AFEFE038 000038 (v01 HPQOEM SLIC-MPC 00000003 01000013)
[ 0.000000] ACPI: FACP 0x00000000AFEFD000 000074 (v01 HPQOEM 307E 00000003 HP 00000001)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170531/tbfadt-658)
[ 0.000000] ACPI: DSDT 0x00000000AFEDE000 01B406 (v01 HPQOEM SB700 00000001 INTL 20060912)
[ 0.000000] ACPI: FACS 0x00000000AFE8F000 000040
[ 0.000000] ACPI: APIC 0x00000000AFEFC000 000084 (v01 HPQOEM 307E 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 0x00000000AFEFB000 00003C (v01 HPQOEM 307E 00000001 HP 00000001)
[ 0.000000] ACPI: HPET 0x00000000AFEDB000 000038 (v01 HPQOEM 307E 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 0x00000000AFEDA000 000386 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13fffb000-0x13fffffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000afceffff]
[ 0.000000] node 0: [mem 0x00000000afeff000-0x00000000afefffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.000000] On node 0 totalpages: 982159
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11188 pages used for memmap
[ 0.000000] DMA32 zone: 716017 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000eefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000ef000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafcf0000-0xafdcefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafdcf000-0xafecefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafecf000-0xafefefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaff00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] e820: [mem 0xaff00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 38 pages/cpu @ffff94a63fc00000 s115032 r8192 d32424 u524288
[ 0.000000] pcpu-alloc: s115032 r8192 d32424 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 966790
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: auto BOOT_IMAGE=Linux ro root=UUID=d83c21d8-53d3-46e2-8772-82e9dd92546c edd=off
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xfdbc000000-0xfdbdffffff] (32MB)
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xa4000000-0xa7ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xa4000000-0xa7ffffff]
[ 0.000000] Memory: 3718380K/3928636K available (6583K kernel code, 1153K rwdata, 2964K rodata, 1472K init, 696K bss, 210256K reserved, 0K cma-reserved)
[ 0.000000] ftrace: allocating 28554 entries in 112 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2194.495 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.99 BogoMIPS (lpj=8777980)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170531
[ 0.012801] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.012901] Security Framework initialized
[ 0.012938] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.012980] AppArmor: AppArmor disabled by boot time parameter
[ 0.014325] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.015031] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.015108] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.015166] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.015446] CPU: Physical Processor ID: 0
[ 0.015482] CPU: Processor Core ID: 0
[ 0.015518] mce: CPU supports 6 MCE banks
[ 0.015559] LVT offset 0 assigned for vector 0xf9
[ 0.015597] process: using AMD E400 aware idle routine
[ 0.015634] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.015670] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[ 0.016984] Freeing SMP alternatives memory: 28K
[ 0.020007] process: System has AMD C1E enabled
[ 0.020159] smpboot: Max logical packages: 2
[ 0.020560] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064000] process: Switch to broadcast mode on CPU0
[ 0.064000] smpboot: CPU0: AMD Athlon(tm) II P340 Dual-Core Processor (family: 0x10, model: 0x6, stepping: 0x3)
[ 0.064000] Performance Events: AMD PMU driver.
[ 0.064000] ... version: 0
[ 0.064000] ... bit width: 48
[ 0.064000] ... generic registers: 4
[ 0.064000] ... value mask: 0000ffffffffffff
[ 0.064000] ... max period: 00007fffffffffff
[ 0.064000] ... fixed-purpose events: 0
[ 0.064000] ... event mask: 000000000000000f
[ 0.064000] Hierarchical SRCU implementation.
[ 0.064000] smp: Bringing up secondary CPUs ...
[ 0.064000] x86: Booting SMP configuration:
[ 0.064000] .... node #0, CPUs: #1
[ 0.004000] process: Switch to broadcast mode on CPU1
[ 0.142023] smp: Brought up 1 node, 2 CPUs
[ 0.142023] smpboot: Total of 2 processors activated (8777.99 BogoMIPS)
[ 0.142023] devtmpfs: initialized
[ 0.142023] x86/mm: Memory block size: 128MB
[ 0.142023] PM: Registering ACPI NVS region [mem 0xafdcf000-0xafecefff] (1048576 bytes)
[ 0.142023] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.142023] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.144055] pinctrl core: initialized pinctrl subsystem
[ 0.144225] NET: Registered protocol family 16
[ 0.144464] cpuidle: using governor ladder
[ 0.144464] cpuidle: using governor menu
[ 0.144464] PCCT header not found.
[ 0.144464] node 0 link 0: io port [0, ffffff]
[ 0.144464] TOM: 00000000c0000000 aka 3072M
[ 0.144464] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.144464] node 0 link 0: mmio [c0000000, cfffffff]
[ 0.144464] node 0 link 0: mmio [d0000000, d21fffff]
[ 0.144464] node 0 link 0: mmio [d2200000, d23fffff]
[ 0.144464] node 0 link 0: mmio [d2400000, dfffffff]
[ 0.144464] node 0 link 0: mmio [e0000000, e0ffffff] ==> none
[ 0.144464] node 0 link 0: mmio [e1000000, ffb7ffff] ==> [f0000000, ffb7ffff]
[ 0.144464] TOM2: 0000000140000000 aka 5120M
[ 0.144464] bus: [bus 00-1f] on node 0 link 0
[ 0.144464] bus: 00 [io 0x0000-0xffff]
[ 0.144464] bus: 00 [mem 0xc0000000-0xdfffffff]
[ 0.144464] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.144464] bus: 00 [mem 0x140000000-0xfcffffffff]
[ 0.144464] ACPI: bus type PCI registered
[ 0.144464] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.144464] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.144464] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.144464] PCI: Using configuration type 1 for base access
[ 0.144464] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.144464] mtrr: probably your BIOS does not setup all CPUs.
[ 0.144464] mtrr: corrected configuration.
[ 0.145073] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.145073] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.148074] ACPI: Added _OSI(Module Device)
[ 0.148112] ACPI: Added _OSI(Processor Device)
[ 0.148148] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.148184] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.162031] ACPI Error: No handler for Region [ECRM] (ffff94a63b529168) [EmbeddedControl] (20170531/evregion-166)
[ 0.162081] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20170531/exfldio-299)
[ 0.162122] ACPI Error: Method parse/execution failed \_SB.PCI0.PB9.NCRD._STA, AE_NOT_EXIST (20170531/psparse-550)
[ 0.162167] ACPI Error: Method execution failed \_SB.PCI0.PB9.NCRD._STA, AE_NOT_EXIST (20170531/uteval-103)
[ 0.162942] ACPI: EC: EC started
[ 0.163013] ACPI: EC: interrupt blocked
[ 0.172525] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.172566] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.172606] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.172646] ACPI: Interpreter enabled
[ 0.172703] ACPI: (supports S0 S3 S4 S5)
[ 0.172739] ACPI: Using IOAPIC for interrupt routing
[ 0.172960] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.176980] ACPI: Power Resource [APPR] (off)
[ 0.181898] ACPI: Power Resource [PFN0] (off)
[ 0.181987] ACPI: Power Resource [PFN1] (off)
[ 0.182071] ACPI: Power Resource [PFN2] (off)
[ 0.182154] ACPI: Power Resource [PFN3] (off)
[ 0.182238] ACPI: Power Resource [PFN4] (off)
[ 0.182954] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.183031] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.183074] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.183202] acpi PNP0A03:00: host bridge window expanded to [mem 0xf0000000-0xffffffff window]; [mem 0xffe00000-0xffffffff] ignored
[ 0.183250] acpi PNP0A03:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
[ 0.183291] acpi PNP0A03:00: ignoring host bridge window [mem 0x000ec000-0x000effff window] (conflicts with Reserved [mem 0x000ef000-0x000fffff])
[ 0.183518] PCI host bridge to bus 0000:00
[ 0.183555] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.183592] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.183629] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.183668] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.183707] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.183746] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.183784] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.183824] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.183863] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.183901] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.183940] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.183986] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.184006] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.184045] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[ 0.184084] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff window]
[ 0.184123] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.184168] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
[ 0.184275] pci 0000:00:01.0: [103c:9602] type 01 class 0x060400
[ 0.184410] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
[ 0.184451] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.184541] pci 0000:00:09.0: [1022:9608] type 01 class 0x060400
[ 0.184587] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.184682] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.184702] pci 0000:00:11.0: reg 0x10: [io 0x5018-0x501f]
[ 0.184710] pci 0000:00:11.0: reg 0x14: [io 0x5024-0x5027]
[ 0.184719] pci 0000:00:11.0: reg 0x18: [io 0x5010-0x5017]
[ 0.184727] pci 0000:00:11.0: reg 0x1c: [io 0x5020-0x5023]
[ 0.184736] pci 0000:00:11.0: reg 0x20: [io 0x5000-0x500f]
[ 0.184744] pci 0000:00:11.0: reg 0x24: [mem 0xd240b000-0xd240b3ff]
[ 0.184855] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.184872] pci 0000:00:12.0: reg 0x10: [mem 0xd240a000-0xd240afff]
[ 0.185007] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.185026] pci 0000:00:12.2: reg 0x10: [mem 0xd2409000-0xd24090ff]
[ 0.185100] pci 0000:00:12.2: supports D1 D2
[ 0.185101] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.185187] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.185203] pci 0000:00:13.0: reg 0x10: [mem 0xd2408000-0xd2408fff]
[ 0.185337] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.185357] pci 0000:00:13.2: reg 0x10: [mem 0xd2407000-0xd24070ff]
[ 0.185431] pci 0000:00:13.2: supports D1 D2
[ 0.185432] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.185517] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.185660] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.185683] pci 0000:00:14.2: reg 0x10: [mem 0xd2400000-0xd2403fff 64bit]
[ 0.185745] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.185821] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.185959] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.186061] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.186077] pci 0000:00:14.5: reg 0x10: [mem 0xd2406000-0xd2406fff]
[ 0.186205] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.186222] pci 0000:00:16.0: reg 0x10: [mem 0xd2405000-0xd2405fff]
[ 0.186348] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.186368] pci 0000:00:16.2: reg 0x10: [mem 0xd2404000-0xd24040ff]
[ 0.186441] pci 0000:00:16.2: supports D1 D2
[ 0.186442] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.186524] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.186594] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.186660] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.186727] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.186795] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.186949] pci 0000:01:05.0: [1002:9712] type 00 class 0x030000
[ 0.186958] pci 0000:01:05.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[ 0.186962] pci 0000:01:05.0: reg 0x14: [io 0x4000-0x40ff]
[ 0.186966] pci 0000:01:05.0: reg 0x18: [mem 0xd2300000-0xd230ffff]
[ 0.186975] pci 0000:01:05.0: reg 0x24: [mem 0xd2200000-0xd22fffff]
[ 0.186995] pci 0000:01:05.0: supports D1 D2
[ 0.187035] pci 0000:01:05.1: [1002:970f] type 00 class 0x040300
[ 0.187044] pci 0000:01:05.1: reg 0x10: [mem 0xd2310000-0xd2313fff]
[ 0.187075] pci 0000:01:05.1: supports D1 D2
[ 0.187138] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.187177] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.187179] pci 0000:00:01.0: bridge window [mem 0xd2200000-0xd23fffff]
[ 0.187182] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.187266] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
[ 0.187287] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.187308] pci 0000:02:00.0: reg 0x18: [mem 0xd0010000-0xd0010fff 64bit pref]
[ 0.187321] pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd000ffff 64bit pref]
[ 0.187329] pci 0000:02:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.187390] pci 0000:02:00.0: supports D1 D2
[ 0.187391] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.208061] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.208110] pci 0000:00:04.0: bridge window [io 0x2000-0x3fff]
[ 0.208113] pci 0000:00:04.0: bridge window [mem 0xd1200000-0xd21fffff]
[ 0.208116] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd10fffff 64bit pref]
[ 0.208249] pci 0000:03:00.0: [14e4:4727] type 00 class 0x028000
[ 0.208279] pci 0000:03:00.0: reg 0x10: [mem 0xd1100000-0xd1103fff 64bit]
[ 0.208390] pci 0000:03:00.0: supports D1 D2
[ 0.220077] pci 0000:00:09.0: PCI bridge to [bus 03]
[ 0.220126] pci 0000:00:09.0: bridge window [mem 0xd1100000-0xd11fffff]
[ 0.220220] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.220259] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
[ 0.220265] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.220267] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.220269] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.220270] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[ 0.220272] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
[ 0.220273] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[ 0.220275] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.220276] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.220277] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.220279] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.220280] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.220282] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.220283] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[ 0.220284] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
[ 0.220286] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff window] (subtractive decode)
[ 0.222297] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.222421] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.222543] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.222666] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.222772] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.222864] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.222955] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.223047] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.223414] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.223535] ACPI: EC: interrupt unblocked
[ 0.223577] ACPI: EC: event unblocked
[ 0.223618] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.223658] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.223797] pci 0000:01:05.0: vgaarb: setting as boot VGA device
[ 0.223797] pci 0000:01:05.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.224008] pci 0000:01:05.0: vgaarb: bridge control possible
[ 0.224044] vgaarb: loaded
[ 0.224149] EDAC MC: Ver: 3.0.0
[ 0.224384] PCI: Using ACPI for IRQ routing
[ 0.232463] PCI: pci_cache_line_size set to 64 bytes
[ 0.232602] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.232604] e820: reserve RAM buffer [mem 0xafcf0000-0xafffffff]
[ 0.232605] e820: reserve RAM buffer [mem 0xaff00000-0xafffffff]
[ 0.232743] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.232743] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.234194] clocksource: Switched to clocksource hpet
[ 0.245463] VFS: Disk quotas dquot_6.6.0
[ 0.245534] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.245672] pnp: PnP ACPI init
[ 0.247746] system 00:00: [io 0x0400-0x04cf] has been reserved
[ 0.247823] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.247860] system 00:00: [io 0x04d6] has been reserved
[ 0.247896] system 00:00: [io 0x0680-0x06ff] has been reserved
[ 0.247932] system 00:00: [io 0x077a] has been reserved
[ 0.247969] system 00:00: [io 0x0c00-0x0c01] has been reserved
[ 0.248024] system 00:00: [io 0x0c14] has been reserved
[ 0.248061] system 00:00: [io 0x0c50-0x0c52] has been reserved
[ 0.248097] system 00:00: [io 0x0c6c] has been reserved
[ 0.248134] system 00:00: [io 0x0c6f] has been reserved
[ 0.248170] system 00:00: [io 0x0cd0-0x0cdb] has been reserved
[ 0.248207] system 00:00: [io 0x0220-0x0227] has been reserved
[ 0.248243] system 00:00: [io 0x0260-0x0273] has been reserved
[ 0.248279] system 00:00: [io 0x0800] has been reserved
[ 0.248316] system 00:00: [io 0x0804] has been reserved
[ 0.248352] system 00:00: [io 0x087f] has been reserved
[ 0.248388] system 00:00: [io 0x0cdc-0x0cdf] has been reserved
[ 0.248425] system 00:00: [io 0x0b00-0x0b0f] has been reserved
[ 0.248462] system 00:00: [io 0x0b20-0x0b3f] has been reserved
[ 0.248499] system 00:00: [io 0x0200-0x027f] could not be reserved
[ 0.248538] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.248622] system 00:01: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.248664] system 00:01: [mem 0x000ec000-0x000fffff] could not be reserved
[ 0.248701] system 00:01: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.248739] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.248775] system 00:01: [mem 0xfeb00000-0xfeb00fff] has been reserved
[ 0.248813] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.248850] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.248887] system 00:01: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.248924] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.248971] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.249039] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.249065] pnp 00:04: Plug and Play ACPI device, IDs SYN0177 SYN0100 SYN0002 PNP0f13 (active)
[ 0.249466] pnp: PnP ACPI: found 5 devices
[ 0.256927] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.256974] pci 0000:02:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[ 0.257042] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.257079] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.257117] pci 0000:00:01.0: bridge window [mem 0xd2200000-0xd23fffff]
[ 0.257154] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.257198] pci 0000:02:00.0: BAR 6: assigned [mem 0xd1200000-0xd121ffff pref]
[ 0.257238] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.257274] pci 0000:00:04.0: bridge window [io 0x2000-0x3fff]
[ 0.257311] pci 0000:00:04.0: bridge window [mem 0xd1200000-0xd21fffff]
[ 0.257349] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd10fffff 64bit pref]
[ 0.257389] pci 0000:00:09.0: PCI bridge to [bus 03]
[ 0.257427] pci 0000:00:09.0: bridge window [mem 0xd1100000-0xd11fffff]
[ 0.257466] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.257503] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
[ 0.257550] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.257552] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.257553] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.257555] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.257556] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.257558] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.257559] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.257560] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.257562] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.257563] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.257564] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.257566] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.257567] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.257569] pci_bus 0000:00: resource 17 [mem 0xc0000000-0xdfffffff window]
[ 0.257570] pci_bus 0000:00: resource 18 [mem 0xf0000000-0xffffffff window]
[ 0.257572] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.257573] pci_bus 0000:01: resource 1 [mem 0xd2200000-0xd23fffff]
[ 0.257574] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.257576] pci_bus 0000:02: resource 0 [io 0x2000-0x3fff]
[ 0.257577] pci_bus 0000:02: resource 1 [mem 0xd1200000-0xd21fffff]
[ 0.257578] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd10fffff 64bit pref]
[ 0.257580] pci_bus 0000:03: resource 1 [mem 0xd1100000-0xd11fffff]
[ 0.257582] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.257583] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.257585] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.257586] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.257587] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.257588] pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.257590] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.257591] pci_bus 0000:04: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.257592] pci_bus 0000:04: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.257594] pci_bus 0000:04: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.257595] pci_bus 0000:04: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.257596] pci_bus 0000:04: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.257597] pci_bus 0000:04: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.257599] pci_bus 0000:04: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.257600] pci_bus 0000:04: resource 17 [mem 0xc0000000-0xdfffffff window]
[ 0.257601] pci_bus 0000:04: resource 18 [mem 0xf0000000-0xffffffff window]
[ 0.257723] NET: Registered protocol family 2
[ 0.257984] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.258162] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.258353] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.258465] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.258535] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.258656] NET: Registered protocol family 1
[ 0.258707] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.376493] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.496504] pci 0000:01:05.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.496608] Unpacking initramfs...
[ 0.517689] Freeing initrd memory: 800K
[ 0.518124] PCI-DMA: Disabling AGP.
[ 0.518255] PCI-DMA: aperture base @ a4000000 size 65536 KB
[ 0.518292] PCI-DMA: using GART IOMMU.
[ 0.518328] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.521405] LVT offset 1 assigned for vector 0x400
[ 0.521490] IBS: LVT offset 1 assigned
[ 0.521593] perf: AMD IBS detected (0x0000001f)
[ 0.522000] audit: initializing netlink subsys (disabled)
[ 0.522186] audit: type=2000 audit(1503265861.522:1): state=initialized audit_enabled=0 res=1
[ 0.522695] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.522799] zbud: loaded
[ 1.038526] Key type asymmetric registered
[ 1.038569] Asymmetric key parser 'x509' registered
[ 1.038640] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.039680] io scheduler noop registered
[ 1.039717] io scheduler deadline registered
[ 1.039761] io scheduler cfq registered (default)
[ 1.039797] io scheduler mq-deadline registered
[ 1.040436] ACPI: ACPI: processor limited to max C-state 1
[ 1.040596] GHES: HEST is not enabled!
[ 1.040746] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.041367] ioremap on RAM at 0x000000003ed00000 - 0x000000003ed003ff
[ 1.041410] ------------[ cut here ]------------
[ 1.041450] WARNING: CPU: 0 PID: 1 at /build/linux-yioSfB/linux-4.13~rc5/arch/x86/mm/ioremap.c:122 __ioremap_caller+0x1dd/0x340
[ 1.041490] Modules linked in:
[ 1.041527] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-rc5-amd64 #1 Debian 4.13~rc5-1~exp1
[ 1.041566] Hardware name: Hewlett-Packard HP 425/1475, BIOS 68DVA Ver. F.03 08/13/2010
[ 1.041605] task: ffff94a63afb4040 task.stack: ffffb40e80018000
[ 1.041642] RIP: 0010:__ioremap_caller+0x1dd/0x340
[ 1.041678] RSP: 0018:ffffb40e8001bbc8 EFLAGS: 00010282
[ 1.041715] RAX: 0000000000000039 RBX: 000000003ed00000 RCX: ffffffff9c64b3c8
[ 1.041751] RDX: 0000000000000000 RSI: 0000000000000092 RDI: 0000000000000246
[ 1.041787] RBP: ffffb40e8001bd00 R08: 0000000000000000 R09: 0000000000000202
[ 1.041824] R10: 0000000000000400 R11: ffffffff9c8d2ded R12: ffffffff9be7ac3d
[ 1.041860] R13: 0000000000000400 R14: 0000000000000002 R15: 0000000000000000
[ 1.041897] FS: 0000000000000000(0000) GS:ffff94a63fc00000(0000) knlGS:0000000000000000
[ 1.041935] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1.041971] CR2: ffffb40e806e4000 CR3: 000000012c009000 CR4: 00000000000006f0
[ 1.042008] Call Trace:
[ 1.042046] ? acpi_rs_convert_aml_to_resources+0x95/0xd4
[ 1.042084] ? hpet_resources+0x12d/0x170
[ 1.042121] ? acpi_os_release_object+0xa/0x10
[ 1.042158] ? acpi_ut_update_object_reference+0x11f/0x1a1
[ 1.042195] ? misc_seq_start+0x30/0x30
[ 1.042231] ? acpi_walk_resource_buffer+0x48/0x7e
[ 1.042267] ? misc_seq_start+0x30/0x30
[ 1.042303] ? acpi_walk_resources+0x82/0xb7
[ 1.042339] ? hpet_acpi_add+0x48/0x9a
[ 1.042376] ? acpi_device_probe+0x45/0x110
[ 1.042412] ? driver_probe_device+0x293/0x440
[ 1.042448] ? __driver_attach+0xda/0xe0
[ 1.042484] ? driver_probe_device+0x440/0x440
[ 1.042521] ? bus_for_each_dev+0x67/0xb0
[ 1.042556] ? bus_add_driver+0x16a/0x260
[ 1.042593] ? set_debug_rodata+0x11/0x11
[ 1.042628] ? driver_register+0x57/0xc0
[ 1.042665] ? hpet_init+0x3a/0x65
[ 1.042701] ? hpet_mmap_enable+0x45/0x45
[ 1.042738] ? do_one_initcall+0x4e/0x190
[ 1.042774] ? set_debug_rodata+0x11/0x11
[ 1.042809] ? kernel_init_freeable+0x162/0x1e3
[ 1.042846] ? rest_init+0xc0/0xc0
[ 1.042882] ? kernel_init+0xa/0xf7
[ 1.042918] ? ret_from_fork+0x25/0x30
[ 1.042953] Code: e9 ca fe ff ff 80 3d d4 37 bc 00 00 75 ef 48 8d 54 24 28 48 8d 74 24 18 48 c7 c7 17 96 3f 9c c6 05 ba 37 bc 00 01 e8 ce 02 07 00 <0f> ff 45 31 ff e9 9a fe ff ff 83 fd 01 75 08 84 c0 0f 85 73 ff
[ 1.043021] ---[ end trace 53688f69719b158e ]---
[ 1.043057] hpet_acpi_add: no address or irqs in _CRS
[ 1.043109] Linux agpgart interface v0.103
[ 1.043195] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.043234] AMD IOMMUv2 functionality not available on this system
[ 1.043556] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.045371] i8042: Detected active multiplexing controller, rev 1.1
[ 1.046146] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.046189] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.046257] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.046317] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.046376] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.046616] mousedev: PS/2 mouse device common for all mice
[ 1.046708] rtc_cmos 00:02: RTC can wake from S4
[ 1.046887] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.046947] rtc_cmos 00:02: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.047037] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.047353] NET: Registered protocol family 10
[ 1.047664] Segment Routing with IPv6
[ 1.047717] mip6: Mobile IPv6
[ 1.047753] NET: Registered protocol family 17
[ 1.047790] mpls_gso: MPLS GSO support
[ 1.048116] microcode: CPU0: patch_level=0x010000c8
[ 1.048178] microcode: CPU1: patch_level=0x010000c8
[ 1.048291] microcode: Microcode Update Driver: v2.2.
[ 1.048302] sched_clock: Marking stable (1048284681, 0)->(1179057158, -130772477)
[ 1.048630] registered taskstats version 1
[ 1.048686] zswap: loaded using pool lzo/zbud
[ 1.048806] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.049195] rtc_cmos 00:02: setting system clock to 2017-08-20 21:51:02 UTC (1503265862)
[ 1.049296] PM: Hibernation image not present or could not be loaded.
[ 1.052512] Freeing unused kernel memory: 1472K
[ 1.052589] Write protecting the kernel read-only data: 12288k
[ 1.053445] Freeing unused kernel memory: 1596K
[ 1.057661] Freeing unused kernel memory: 1132K
[ 1.059825] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.071450] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.176385] SCSI subsystem initialized
[ 1.178873] libata version 3.00 loaded.
[ 1.179926] ahci 0000:00:11.0: version 3.0
[ 1.180212] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.180259] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.180730] scsi host0: ahci
[ 1.181006] scsi host1: ahci
[ 1.181152] ata1: SATA max UDMA/133 abar m1024@0xd240b000 port 0xd240b100 irq 19
[ 1.181192] ata2: SATA max UDMA/133 abar m1024@0xd240b000 port 0xd240b180 irq 19
[ 1.536114] tsc: Refined TSC clocksource calibration: 2194.504 MHz
[ 1.536164] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa1eb11b4b, max_idle_ns: 440795279166 ns
[ 1.656121] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.656193] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.657497] ata1.00: ATA-8: WDC WD3200BEVT-60A23T0, 02.01A02, max UDMA/100
[ 1.657540] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.657974] ata1.00: ATA Identify Device Log not supported
[ 1.658016] ata1.00: Security Log not supported
[ 1.659092] ata2.00: ATAPI: hp DVDRAM GT30L, mP04, max UDMA/100
[ 1.659779] ata1.00: ATA Identify Device Log not supported
[ 1.659820] ata1.00: Security Log not supported
[ 1.659860] ata1.00: configured for UDMA/100
[ 1.660118] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-6 1A02 PQ: 0 ANSI: 5
[ 1.663718] ata2.00: configured for UDMA/100
[ 1.692349] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.692403] sd 0:0:0:0: [sda] Write Protect is off
[ 1.692440] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.692448] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.694776] scsi 1:0:0:0: CD-ROM hp DVDRAM GT30L mP04 PQ: 0 ANSI: 5
[ 1.740159] sda: sda1 sda2 sda3 sda4
[ 1.740679] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.859991] EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities
[ 1.860350] EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities
[ 1.889530] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
[ 2.560216] clocksource: Switched to clocksource tsc
[ 5.323267] acpi_cpufreq: overriding BIOS provided _PSD data
[ 5.417105] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B06 (\_SB.PCI0.SMBS.SMBO) (20170531/utaddress-247)
[ 5.417164] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.450072] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[ 5.450132] ACPI: Sleep Button [SLPB]
[ 5.450258] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
[ 5.450327] ACPI: Lid Switch [LID]
[ 5.450408] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 5.450492] ACPI: Power Button [PWRF]
[ 5.488235] ACPI: bus type USB registered
[ 5.488340] usbcore: registered new interface driver usbfs
[ 5.488393] usbcore: registered new interface driver hub
[ 5.488453] usbcore: registered new device driver usb
[ 5.490595] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.528666] ehci-pci: EHCI PCI platform driver
[ 5.529183] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 5.529249] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 5.529309] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 5.529370] ehci-pci 0000:00:12.2: debug port 1
[ 5.529492] ehci-pci 0000:00:12.2: irq 17, io mem 0xd2409000
[ 5.536277] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.544146] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 5.544346] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.544394] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.545470] usb usb1: Product: EHCI Host Controller
[ 5.545515] usb usb1: Manufacturer: Linux 4.13.0-rc5-amd64 ehci_hcd
[ 5.545559] usb usb1: SerialNumber: 0000:00:12.2
[ 5.546032] hub 1-0:1.0: USB hub found
[ 5.546128] hub 1-0:1.0: 5 ports detected
[ 5.547050] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 5.547109] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 5.547164] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 5.547225] ehci-pci 0000:00:13.2: debug port 1
[ 5.547322] ehci-pci 0000:00:13.2: irq 17, io mem 0xd2407000
[ 5.560127] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 5.560244] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.560288] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.560328] usb usb2: Product: EHCI Host Controller
[ 5.560366] usb usb2: Manufacturer: Linux 4.13.0-rc5-amd64 ehci_hcd
[ 5.560404] usb usb2: SerialNumber: 0000:00:13.2
[ 5.560835] hub 2-0:1.0: USB hub found
[ 5.560929] hub 2-0:1.0: 5 ports detected
[ 5.562039] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 5.562097] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 5.562153] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 5.562215] ehci-pci 0000:00:16.2: debug port 1
[ 5.562310] ehci-pci 0000:00:16.2: irq 17, io mem 0xd2404000
[ 5.569681] ACPI: AC Adapter [AC] (on-line)
[ 5.576808] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 5.576919] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.576963] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.577004] usb usb3: Product: EHCI Host Controller
[ 5.577041] usb usb3: Manufacturer: Linux 4.13.0-rc5-amd64 ehci_hcd
[ 5.577079] usb usb3: SerialNumber: 0000:00:16.2
[ 5.577305] hub 3-0:1.0: USB hub found
[ 5.577355] hub 3-0:1.0: 4 ports detected
[ 5.578030] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.578489] ohci-pci: OHCI PCI platform driver
[ 5.578894] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 5.578942] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 5.579028] ohci-pci 0000:00:12.0: irq 18, io mem 0xd240a000
[ 5.598193] ACPI: Video Device [IGFX] (multi-head: yes rom: no post: no)
[ 5.610835] acpi device:01: registered as cooling_device2
[ 5.611045] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input8
[ 5.644396] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.644447] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.644494] usb usb4: Product: OHCI PCI host controller
[ 5.644535] usb usb4: Manufacturer: Linux 4.13.0-rc5-amd64 ohci_hcd
[ 5.644578] usb usb4: SerialNumber: 0000:00:12.0
[ 5.645088] hub 4-0:1.0: USB hub found
[ 5.645142] hub 4-0:1.0: 5 ports detected
[ 5.645634] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 5.645681] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 5.645754] ohci-pci 0000:00:13.0: irq 18, io mem 0xd2408000
[ 5.647916] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 5.649353] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.649395] ACPI: Thermal Zone [CPUZ] (34 C)
[ 5.683763] ACPI: Battery Slot [BAT0] (battery present)
[ 5.687094] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 5.687228] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x42
[ 5.687317] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 5.687366] sp5100_tco: Last reboot was not triggered by watchdog.
[ 5.687518] sp5100_tco: initialized (0xffffb40e806ddb00). heartbeat=60 sec (nowayout=0)
[ 5.697562] thermal LNXTHERM:01: registered as thermal_zone1
[ 5.697652] ACPI: Thermal Zone [TZ3] (20 C)
[ 5.709387] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.709437] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.709478] usb usb5: Product: OHCI PCI host controller
[ 5.709516] usb usb5: Manufacturer: Linux 4.13.0-rc5-amd64 ohci_hcd
[ 5.709554] usb usb5: SerialNumber: 0000:00:13.0
[ 5.709788] hub 5-0:1.0: USB hub found
[ 5.709870] hub 5-0:1.0: 5 ports detected
[ 5.710446] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 5.710491] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 5.710556] ohci-pci 0000:00:14.5: irq 18, io mem 0xd2406000
[ 5.772248] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.772310] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.772361] usb usb6: Product: OHCI PCI host controller
[ 5.772406] usb usb6: Manufacturer: Linux 4.13.0-rc5-amd64 ohci_hcd
[ 5.772451] usb usb6: SerialNumber: 0000:00:14.5
[ 5.772906] hub 6-0:1.0: USB hub found
[ 5.773001] hub 6-0:1.0: 2 ports detected
[ 5.773755] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 5.773814] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 5.773914] ohci-pci 0000:00:16.0: irq 18, io mem 0xd2405000
[ 5.799429] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.799579] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.836345] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.836407] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.836458] usb usb7: Product: OHCI PCI host controller
[ 5.836502] usb usb7: Manufacturer: Linux 4.13.0-rc5-amd64 ohci_hcd
[ 5.836547] usb usb7: SerialNumber: 0000:00:16.0
[ 5.836960] hub 7-0:1.0: USB hub found
[ 5.837024] hub 7-0:1.0: 4 ports detected
[ 5.872205] usb 1-5: new high-speed USB device number 2 using ehci-pci
[ 5.916690] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 5.941051] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.941105] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 5.941721] r8169 0000:02:00.0 eth0: RTL8102e at 0xffffb40e80705000, 1c:c1:de:b8:15:d4, XID 04e00000 IRQ 24
[ 5.947951] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input10
[ 6.015224] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.015273] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.015502] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.037471] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD88B1: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[ 6.037541] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.037592] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 6.037639] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
[ 6.037684] snd_hda_codec_idt hdaudioC0D0: inputs:
[ 6.037730] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11
[ 6.037777] snd_hda_codec_idt hdaudioC0D0: Mic=0xa
[ 6.052357] usb 1-5: New USB device found, idVendor=0461, idProduct=4db6
[ 6.052416] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 6.052465] usb 1-5: Product: Villem
[ 6.052511] usb 1-5: Manufacturer: Primax Electronics Ltd.
[ 6.052556] usb 1-5: SerialNumber: PMX01
[ 6.070774] [drm] radeon kernel modesetting enabled.
[ 6.094377] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[ 6.094577] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
[ 6.094672] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
[ 6.212197] usb 5-4: new full-speed USB device number 2 using ohci-pci
[ 6.242744] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[ 6.242815] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[ 6.242877] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[ 6.242950] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[ 6.255641] bcma: bus0: Bus registered
[ 6.341980] kvm: Nested Virtualization enabled
[ 6.342029] kvm: Nested Paging enabled
[ 6.405452] CRAT table not found
[ 6.405505] Finished initializing topology ret=0
[ 6.405574] kfd kfd: Initialized module
[ 6.408223] usb 5-4: New USB device found, idVendor=0a5c, idProduct=21b4
[ 6.408281] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.408330] usb 5-4: Product: Broadcom 2070 Bluetooth
[ 6.408375] usb 5-4: Manufacturer: Broadcom Corp
[ 6.408419] usb 5-4: SerialNumber: E02A820231BD
[ 6.420765] MCE: In-kernel MCE decoding enabled.
[ 6.440837] EDAC amd64: Node 0: DRAM ECC disabled.
[ 6.440926] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 6.441117] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 6.680362] [drm] initializing kernel modesetting (RS880 0x1002:0x9712 0x103C:0x1475 0x00).
[ 6.681353] ATOM BIOS: HP_Valima
[ 6.681478] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[ 6.681534] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 6.681593] [drm] Detected VRAM RAM=256M, BAR=256M
[ 6.681637] [drm] RAM width 32bits DDR
[ 6.681808] [TTM] Zone kernel: Available graphics memory: 1894680 kiB
[ 6.681858] [TTM] Initializing pool allocator
[ 6.682936] [TTM] Initializing DMA pool allocator
[ 6.683021] [drm] radeon: 256M of VRAM memory ready
[ 6.683069] [drm] radeon: 512M of GTT memory ready.
[ 6.683125] [drm] Loading RS780 Microcode
[ 6.754038] psmouse serio4: synaptics: queried max coordinates: x [..5654], y [..4698]
[ 6.754050] radeon 0000:01:05.0: firmware: direct-loading firmware radeon/RS780_pfp.bin
[ 6.785725] radeon 0000:01:05.0: firmware: direct-loading firmware radeon/RS780_me.bin
[ 6.786494] radeon 0000:01:05.0: firmware: direct-loading firmware radeon/R600_rlc.bin
[ 6.786600] [drm] radeon: power management initialized
[ 6.827868] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xa40000/0xa0400/0x0, board id: 0, fw id: 646827
[ 6.864139] input: HP WMI hotkeys as /devices/virtual/input/input18
[ 6.893239] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input14
[ 6.940350] radeon 0000:01:05.0: firmware: direct-loading firmware radeon/RS780_uvd.bin
[ 6.940503] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 6.962368] [drm] PCIE GART of 512M enabled (table at 0x00000000C0146000).
[ 6.962529] radeon 0000:01:05.0: WB enabled
[ 6.962583] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff94a636e15c00
[ 6.965482] radeon 0000:01:05.0: fence driver on ring 5 use gpu addr 0x00000000c0056038 and cpu addr 0xffffb40e81016038
[ 6.965572] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.965616] [drm] Driver supports precise vblank timestamp query.
[ 6.965661] radeon 0000:01:05.0: radeon: MSI limited to 32-bit
[ 6.965726] [drm] radeon: irq initialized.
[ 6.998031] [drm] ring test on 0 succeeded in 0 usecs
[ 7.172821] [drm] ring test on 5 succeeded in 1 usecs
[ 7.172905] [drm] UVD initialized successfully.
[ 7.173189] [drm] ib test on ring 0 succeeded in 0 usecs
[ 7.329562] hp_wmi: Unknown event_id - 0 - 0x0
[ 7.473413] media: Linux media interface: v0.10
[ 7.496435] Linux video capture interface: v2.00
[ 7.787706] uvcvideo: Found UVC 1.00 device Villem (0461:4db6)
[ 7.796081] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 7.796146] uvcvideo 1-5:1.0: Entity type for entity Processing 3 was not initialized!
[ 7.796197] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 7.796476] input: Villem: HP Webcam [2 MP Fixed] as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input19
[ 7.796721] usbcore: registered new interface driver uvcvideo
[ 7.796771] USB Video Class driver (1.1.1)
[ 7.840143] [drm] ib test on ring 5 succeeded
[ 7.840688] [drm] radeon atom DIG backlight initialized
[ 7.840762] [drm] Radeon Display Connectors
[ 7.840800] [drm] Connector 0:
[ 7.840837] [drm] VGA-1
[ 7.840875] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 7.840915] [drm] Encoders:
[ 7.840955] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.840992] [drm] Connector 1:
[ 7.841028] [drm] LVDS-1
[ 7.841065] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 7.841104] [drm] Encoders:
[ 7.841140] [drm] LCD1: INTERNAL_KLDSCP_LVTMA
[ 7.841177] [drm] Connector 2:
[ 7.841213] [drm] HDMI-A-1
[ 7.841249] [drm] HPD1
[ 7.841285] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 7.841325] [drm] Encoders:
[ 7.841361] [drm] DFP1: INTERNAL_UNIPHY
[ 8.651147] Bluetooth: Core ver 2.22
[ 8.651288] NET: Registered protocol family 31
[ 8.651337] Bluetooth: HCI device and connection manager initialized
[ 8.651387] Bluetooth: HCI socket layer initialized
[ 8.651433] Bluetooth: L2CAP socket layer initialized
[ 8.651486] Bluetooth: SCO socket layer initialized
[ 8.703405] b43-phy0: Broadcom 4313 WLAN found (core revision 24)
[ 8.704373] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 10, Type 8 (LCN), Revision 1)
[ 8.704449] b43: probe of bcma0:1 failed with error -95
[ 8.704559] Broadcom 43xx driver loaded [ Features: PNLS ]
[ 8.725510] usbcore: registered new interface driver btusb
[ 8.833167] [drm] fb mappable at 0xC0247000
[ 8.833219] [drm] vram apper at 0xC0000000
[ 8.833262] [drm] size 4325376
[ 8.833304] [drm] fb depth is 24
[ 8.833345] [drm] pitch is 5632
[ 8.833583] fbcon: radeondrmfb (fb0) is primary device
[ 8.896785] brcmsmac bcma0:1: mfg 4bf core 812 rev 24 class 0 irq 17
[ 8.931704] Console: switching to colour frame buffer device 170x48
[ 8.943519] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 8.964137] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:05.0 on minor 0
[ 8.994418] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 9.058535] brcmsmac bcma0:1 wlp3s0b1: renamed from wlan0
[ 10.752110] Bluetooth: hci0 command 0x1009 tx timeout
[ 10.788078] Adding 2312188k swap on /dev/sda2. Priority:-1 extents:1 across:2312188k FS
[ 10.868863] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 11.036671] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 12.488380] aoe: AoE v85 initialised.
[ 12.694372] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 12.739126] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 12.834898] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 94.932151] random: crng init done
[ 564.594644] brcmsmac bcma0:1: firmware: direct-loading firmware brcm/bcm43xx-0.fw
[ 564.617948] brcmsmac bcma0:1: firmware: direct-loading firmware brcm/bcm43xx_hdr-0.fw
[ 564.883955] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 564.890004] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 564.896138] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
[ 565.909204] wlp3s0b1: authenticate with 60:31:97:99:6c:ac
[ 565.916891] wlp3s0b1: send auth to 60:31:97:99:6c:ac (try 1/3)
[ 565.925872] wlp3s0b1: authenticated
[ 565.932139] wlp3s0b1: associate with 60:31:97:99:6c:ac (try 1/3)
[ 565.944473] wlp3s0b1: RX AssocResp from 60:31:97:99:6c:ac (capab=0x1411 status=0 aid=3)
[ 565.950309] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[ 565.955734] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 565.961277] wlp3s0b1: associated
[ 565.966776] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0b1: link becomes ready
[ 565.972941] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 159/256 dur 1778/1504
[ 566.034349] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 137/256 dur 1602/1504
[ 570.244714] wlp3s0b1: deauthenticating from 60:31:97:99:6c:ac by local choice (Reason: 3=DEAUTH_LEAVING)
[ 570.253903] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[ 570.260207] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 570.546907] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 570.554056] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 570.561010] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
[ 571.281272] wlp3s0b1: authenticate with 60:31:97:99:6c:ac
[ 571.288655] wlp3s0b1: send auth to 60:31:97:99:6c:ac (try 1/3)
[ 571.325468] wlp3s0b1: authenticated
[ 571.336163] wlp3s0b1: associate with 60:31:97:99:6c:ac (try 1/3)
[ 571.353253] wlp3s0b1: RX AssocResp from 60:31:97:99:6c:ac (capab=0x1411 status=0 aid=3)
[ 571.361021] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[ 571.367469] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[ 571.374103] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 571.380819] wlp3s0b1: associated
[ 571.387485] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0b1: link becomes ready
[ 571.394875] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 159/256 dur 1778/1504
[ 571.413589] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 137/256 dur 1602/1504
[ 1747.226356] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 153/256 dur 1730/1504
** Model information
sys_vendor: Hewlett-Packard
product_name: HP 425
product_version:
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: 68DVA Ver. F.03
board_vendor: Hewlett-Packard
board_name: 1475
board_version: KBC Version 72.0E
** Loaded modules:
ctr
ccm
aoe
arc4
brcmsmac
cordic
brcmutil
btusb
b43
btrtl
btbcm
btintel
bluetooth
mac80211
drbg
cfg80211
ansi_cprng
ssb
rng_core
ecdh_generic
pcmcia
pcmcia_core
joydev
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
videobuf2_core
videodev
media
hp_wmi
edac_mce_amd
amdkfd
sparse_keymap
kvm_amd
wmi_bmof
rfkill
kvm
bcma
irqbypass
evdev
radeon
snd_hda_codec_idt
sr_mod
ttm
snd_hda_codec_generic
psmouse
cdrom
serio_raw
snd_hda_codec_hdmi
r8169
drm_kms_helper
snd_hda_intel
pcspkr
drm
i2c_algo_bit
mii
k10temp
sg
snd_hda_codec
snd_hda_core
snd_hwdep
snd_pcm
sp5100_tco
snd_timer
wmi
hp_accel
snd
fan
thermal
soundcore
battery
lis3lv02d
video
input_polldev
ohci_pci
shpchp
ac
ohci_hcd
ehci_pci
ehci_hcd
usbcore
usb_common
button
i2c_piix4
acpi_cpufreq
mmc_block
mmc_core
ahci
libahci
libata
sd_mod
scsi_mod
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
crypto_simd
glue_helper
cryptd
aes_x86_64
-- System Information:
Debian Release: buster/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 4.13.0-rc5-amd64 (SMP w/2 CPU cores)
Locale: LANG=es_AR.UTF-8, LC_CTYPE=es_AR.UTF-8 (charmap=UTF-8), LANGUAGE=es_AR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)
Versions of packages linux-image-4.13.0-rc5-amd64 depends on:
ii kmod 24-1
ii linux-base 4.5
ii tiny-initramfs [linux-initramfs-tool] 0.1-4
Versions of packages linux-image-4.13.0-rc5-amd64 recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2.3
Versions of packages linux-image-4.13.0-rc5-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | grub-efi-amd64 | extlinux <none>
pn linux-doc-4.13 <none>
Versions of packages linux-image-4.13.0-rc5-amd64 is related to:
ii firmware-amd-graphics 20161130-3
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 20161130-3
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20161130-3
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20161130-3
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
** lspci output:
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] RS880 Host Bridge
00:01.0 PCI bridge: Hewlett-Packard Company Device 9602
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0)
00:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 4)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS880M [Mobility Radeon HD 4225/4250]
01:05.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RS880 HDMI Audio [Radeon HD 4200 Series]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 02)
03:00.0 Network controller: Broadcom Limited BCM4313 802.11bgn Wireless Network Adapter (rev 01)
** lsmod output:
Module Size Used by
ctr 16384 6
ccm 20480 9
aoe 57344 0
arc4 16384 2
brcmsmac 536576 0
cordic 16384 1 brcmsmac
brcmutil 16384 1 brcmsmac
btusb 45056 0
b43 413696 0
btrtl 16384 1 btusb
btbcm 16384 1 btusb
btintel 16384 1 btusb
bluetooth 540672 5 btrtl,btintel,btbcm,btusb
mac80211 659456 2 brcmsmac,b43
drbg 28672 1
cfg80211 598016 3 brcmsmac,b43,mac80211
ansi_cprng 16384 0
ssb 69632 1 b43
rng_core 16384 1 b43
ecdh_generic 24576 1 bluetooth
pcmcia 61440 1 ssb
pcmcia_core 24576 1 pcmcia
joydev 20480 0
uvcvideo 90112 0
videobuf2_vmalloc 16384 1 uvcvideo
videobuf2_memops 16384 1 videobuf2_vmalloc
videobuf2_v4l2 24576 1 uvcvideo
videobuf2_core 36864 2 uvcvideo,videobuf2_v4l2
videodev 167936 3 uvcvideo,videobuf2_core,videobuf2_v4l2
media 40960 2 uvcvideo,videodev
hp_wmi 16384 0
edac_mce_amd 28672 0
amdkfd 139264 1
sparse_keymap 16384 1 hp_wmi
kvm_amd 2179072 0
wmi_bmof 16384 0
rfkill 24576 4 bluetooth,hp_wmi,cfg80211
kvm 577536 1 kvm_amd
bcma 53248 2 brcmsmac,b43
irqbypass 16384 1 kvm
evdev 24576 0
radeon 1454080 1
snd_hda_codec_idt 57344 1
sr_mod 24576 0
ttm 94208 1 radeon
snd_hda_codec_generic 69632 1 snd_hda_codec_idt
psmouse 143360 0
cdrom 61440 1 sr_mod
serio_raw 16384 0
snd_hda_codec_hdmi 49152 1
r8169 81920 0
drm_kms_helper 151552 1 radeon
snd_hda_intel 36864 0
pcspkr 16384 0
drm 348160 4 radeon,ttm,drm_kms_helper
i2c_algo_bit 16384 1 radeon
mii 16384 1 r8169
k10temp 16384 0
sg 32768 0
snd_hda_codec 126976 4 snd_hda_intel,snd_hda_codec_idt,snd_hda_codec_hdmi,snd_hda_codec_generic
snd_hda_core 77824 5 snd_hda_intel,snd_hda_codec,snd_hda_codec_idt,snd_hda_codec_hdmi,snd_hda_codec_generic
snd_hwdep 16384 1 snd_hda_codec
snd_pcm 98304 4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
sp5100_tco 16384 0
snd_timer 32768 1 snd_pcm
wmi 24576 2 wmi_bmof,hp_wmi
hp_accel 28672 0
snd 73728 8 snd_hda_intel,snd_hwdep,snd_hda_codec,snd_hda_codec_idt,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_pcm
fan 16384 0
thermal 20480 0
soundcore 16384 1 snd
battery 20480 0
lis3lv02d 20480 1 hp_accel
video 40960 0
input_polldev 16384 1 lis3lv02d
ohci_pci 16384 0
shpchp 36864 0
ac 16384 0
ohci_hcd 53248 1 ohci_pci
ehci_pci 16384 0
ehci_hcd 81920 1 ehci_pci
usbcore 245760 6 uvcvideo,ehci_hcd,ohci_pci,btusb,ohci_hcd,ehci_pci
usb_common 16384 1 usbcore
button 16384 0
i2c_piix4 24576 0
acpi_cpufreq 20480 0
mmc_block 32768 0
mmc_core 139264 3 b43,ssb,mmc_block
ahci 36864 4
libahci 32768 1 ahci
libata 237568 2 ahci,libahci
sd_mod 49152 5
scsi_mod 212992 4 sd_mod,libata,sr_mod,sg
ext4 614400 3
crc16 16384 2 bluetooth,ext4
mbcache 16384 1 ext4
jbd2 98304 1 ext4
crc32c_generic 16384 0
fscrypto 28672 1 ext4
ecb 16384 0
crypto_simd 16384 0
glue_helper 16384 0
cryptd 24576 1 crypto_simd
aes_x86_64 20480 6
** apt-cache depends aumix output:
Depends: libc6
Depends: libgpm2
Depends: libncursesw5
Depends: libtinfo5
Depends: aumix-common
Conflicts: aumix-gtk
Replaces: aumix-gtk
** apt-cache depends aumix-common output:
Depends: oss-compat
osspd
Depends: lsb-base
Breaks: aumix
Breaks: aumix-gtk
Replaces: aumix
Replaces: aumix-gtk
** aumix installed version: 2.9.1-5
** oss-compat installed version: 6
Reply to: