Bug#870071: linux-image-4.9.0-3-arm64: Kconfig option for console on frame buffer device is missing
Package: src:linux
Version: 4.9.30-2+deb9u2
Severity: normal
Dear Maintainer,
Please enable CONFIG_FRAMEBUFFER_CONSOLE (preferably as a builtin) in the arm64's kernel image configuration so that systems with a graphics card installed can get a console on the frame buffer rather than only via serial.
-- Package-specific info:
** Version:
Linux version 4.9.0-3-arm64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u2 (2017-06-26)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-arm64 root=UUID=f3b7c265-d79f-4dce-8c44-d6120d9111e7 ro console=ttyAMA0 console=tty0
** Not tainted
** Kernel log:
[ 2.477111] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 2.631395] usb 1-1: New USB device found, idVendor=05ac, idProduct=1006
[ 2.638097] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.645227] usb 1-1: Product: Keyboard Hub
[ 2.649319] usb 1-1: Manufacturer: Apple, Inc.
[ 2.653757] usb 1-1: SerialNumber: 000000000000
[ 2.660074] hub 1-1:1.0: USB hub found
[ 2.664135] hub 1-1:1.0: 3 ports detected
[ 2.783268] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.957106] usb 1-1.1: new low-speed USB device number 3 using xhci_hcd
[ 3.072863] usb 1-1.1: New USB device found, idVendor=413c, idProduct=3012
[ 3.079735] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.087042] usb 1-1.1: Product: Dell USB Optical Mouse
[ 3.092175] usb 1-1.1: Manufacturer: Dell
[ 3.100842] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.103266] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.115764] usbcore: registered new interface driver usbhid
[ 3.121341] usbhid: USB HID core driver
[ 3.125960] input: Dell Dell USB Optical Mouse as /devices/platform/smb/f0000000.pcie/pci0000:00/0000:00:02.2/0000:02:00.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:413C:3012.0001/input/input0
[ 3.142168] hid-generic 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:02:00.0-1.1/input0
[ 3.177110] usb 1-1.2: new low-speed USB device number 4 using xhci_hcd
[ 3.294036] usb 1-1.2: New USB device found, idVendor=05ac, idProduct=024f
[ 3.300910] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.308217] usb 1-1.2: Product: Apple Keyboard
[ 3.312656] usb 1-1.2: Manufacturer: Apple Inc.
[ 3.327778] input: Apple Inc. Apple Keyboard as /devices/platform/smb/f0000000.pcie/pci0000:00/0000:00:02.2/0000:02:00.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:05AC:024F.0002/input/input1
[ 3.401366] apple 0003:05AC:024F.0002: input,hidraw1: USB HID v1.11 Keyboard [Apple Inc. Apple Keyboard] on usb-0000:02:00.0-1.2/input0
[ 3.414198] input: Apple Inc. Apple Keyboard as /devices/platform/smb/f0000000.pcie/pci0000:00/0000:00:02.2/0000:02:00.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:05AC:024F.0003/input/input2
[ 3.415263] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.493164] apple 0003:05AC:024F.0003: input,hidraw2: USB HID v1.11 Device [Apple Inc. Apple Keyboard] on usb-0000:02:00.0-1.2/input1
[ 3.727269] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.209110] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.216467] ata6.00: ATA-9: SanDisk Ultra II 240GB, X41200RL, max UDMA/133
[ 4.223345] ata6.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 4.231248] ata6.00: configured for UDMA/133
[ 4.235759] scsi 5:0:0:0: Direct-Access ATA SanDisk Ultra II 00RL PQ: 0 ANSI: 5
[ 4.587265] ata7: SATA link down (SStatus 0 SControl 300)
[ 4.907267] ata8: SATA link down (SStatus 0 SControl 300)
[ 4.920097] sd 5:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 4.927659] sd 5:0:0:0: [sda] Write Protect is off
[ 4.932451] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.932474] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.948846] sda: sda1 sda2 sda3 sda4
[ 4.953073] sd 5:0:0:0: [sda] Attached SCSI disk
[ 4.994067] PM: Starting manual resume from disk
[ 4.998724] PM: Hibernation image partition 8:3 present
[ 4.998726] PM: Looking for hibernation image.
[ 4.998871] random: fast init done
[ 5.002349] PM: Image not found (code -22)
[ 5.002351] PM: Hibernation image not present or could not be loaded.
[ 5.053585] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.158112] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.171529] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 5.189751] systemd[1]: Detected architecture arm64.
[ 5.196476] systemd[1]: Set hostname to <bzero>.
[ 5.210572] uart-pl011 e1010000.serial: no DMA platform data
[ 5.253903] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.260032] systemd[1]: Listening on Journal Socket.
[ 5.265301] systemd[1]: Created slice System Slice.
[ 5.270336] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.277268] systemd[1]: Created slice system-getty.slice.
[ 5.282769] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.290616] systemd[1]: Mounting Debug File System...
[ 5.314016] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,discard
[ 5.352716] systemd-journald[242]: Received request to flush runtime journal from PID 1
[ 5.388913] EFI Variables Facility v0.08 2004-May-17
[ 5.403412] sd 5:0:0:0: Attached scsi generic sg0 type 0
[ 5.416318] alg: No test for __ecb-aes-ce (__driver-ecb-aes-ce)
[ 5.424176] [drm] Initialized
[ 5.427013] alg: No test for __ecb-aes-ce (cryptd(__driver-ecb-aes-ce))
[ 5.473270] Adding 976892k swap on /dev/sda3. Priority:-1 extents:1 across:976892k SSFS
[ 5.482191] nouveau 0000:01:00.0: NVIDIA GT218 (0a8280b1)
[ 5.542138] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: discard
[ 5.598227] nouveau 0000:01:00.0: bios: version 70.18.8a.00.06
[ 5.605121] nouveau 0000:01:00.0: fb: 1024 MiB DDR3
[ 6.909337] [TTM] Zone kernel: Available graphics memory: 16441086 kiB
[ 6.915953] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 6.922479] [TTM] Initializing pool allocator
[ 6.926845] [TTM] Initializing DMA pool allocator
[ 6.931568] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[ 6.936619] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 6.941938] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 6.947683] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 6.952823] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000000
[ 6.959263] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00020030
[ 6.965704] nouveau 0000:01:00.0: DRM: DCB outp 02: 02021362 00020010
[ 6.972144] nouveau 0000:01:00.0: DRM: DCB outp 04: 01032310 00000000
[ 6.978584] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[ 6.984243] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161
[ 6.989902] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200
[ 7.002018] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.008632] [drm] Driver supports precise vblank timestamp query.
[ 7.037405] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 7.125211] nouveau 0000:01:00.0: DRM: allocated 1280x1024 fb: 0x70000, bo ffff8a00989b0c00
[ 7.133661] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 7.153111] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 7.273378] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.277125] amd-xgbe e0700000.xgmac eth0: Link is Up - 1Gbps/Full - flow control off
[ 8.284889] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 99.683639] random: crng init done
** Model information
Device Tree model: AMD Seattle (Rev.B) Development Board (Overdrive)
** Loaded modules:
nls_ascii
nls_cp437
vfat
fat
nouveau
ttm
drm_kms_helper
evdev
drm
aes_ce_blk
ablk_helper
cryptd
aes_ce_cipher
i2c_algo_bit
ghash_ce
sha2_ce
sha1_ce
sg
efivars
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
jbd2
crc32c_generic
fscrypto
ecb
mbcache
sd_mod
hid_apple
hid_generic
usbhid
hid
amd_xgbe
ptp
xhci_pci
xhci_hcd
ahci_platform
libahci_platform
libahci
libata
usbcore
usb_common
scsi_mod
i2c_designware_platform
pps_core
i2c_designware_core
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1a00]
Subsystem: Advanced Micro Devices, Inc. [AMD] Device [1022:1a00]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1a01]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:1a02] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 59
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 40000000-417fffff
Prefetchable memory behind bridge: 0000000100000000-0000000117ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:1a02] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 60
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: 41800000-418fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [GeForce 210] [10de:0a65] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Gigabyte Technology Co., Ltd GT218 [GeForce 210] [1458:3525]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 69
Region 0: Memory at 40000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at 100000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at 110000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at 1000 [size=128]
Expansion ROM at 41000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nouveau
01:00.1 Audio device [0403]: NVIDIA Corporation High Definition Audio Controller [10de:0be3] (rev a1)
Subsystem: Gigabyte Technology Co., Ltd High Definition Audio Controller [1458:3525]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 58
Region 0: Memory at 41080000 (32-bit, non-prefetchable) [disabled] [size=16K]
Capabilities: <access denied>
02:00.0 USB controller [0c03]: Renesas Technology Corp. uPD720201 USB 3.0 Host Controller [1912:0014] (rev 03) (prog-if 30 [XHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 57
Region 0: Memory at 41800000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 05ac:024f Apple, Inc.
Bus 001 Device 003: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse
Bus 001 Device 002: ID 05ac:1006 Apple, Inc. Hub in Aluminum Keyboard
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 9.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: arm64 (aarch64)
Kernel: Linux 4.9.0-3-arm64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.9.0-3-arm64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.130
ii kmod 23-2
ii linux-base 4.5
Versions of packages linux-image-4.9.0-3-arm64 recommends:
ii firmware-linux-free 3.4
pn irqbalance <none>
Versions of packages linux-image-4.9.0-3-arm64 suggests:
pn debian-kernel-handbook <none>
pn linux-doc-4.9 <none>
Versions of packages linux-image-4.9.0-3-arm64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20161130-3
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: