Bug#865672: linux-image-3.2.0-4-686-pae: new kernel cause Scilab (and may be other programs too) to crash with "Segmentation fault"
Package: src:linux
Version: 3.2.89-1
Severity: important
Dear Maintainer,
Steps to reproduce:
1. Install Debian 7
2. Install Scilab (apt-get install scilab), ensure it runs normally
3. Get new kernel with new updates (3.2.89-1).
4a. Try to start Scilab from GUI - it crashes.
4b. Try to start Scilab from terminal - it reports "Segmentation fault (core
dumped)"
Expected results:
* Scilab is working normally with new kernel.
Actual results:
* Scilab crashed.
Notes:
* Scilab works normally with old kernels - for example with 3.2.78-1.
* This may be related to CVE-2017-1000364
(https://bugs.launchpad.net/bugs/1698919) fix.
Links:
https://bugs.debian.org/865522
https://bugs.launchpad.net/bugs/1699892
-- Package-specific info:
** Version:
Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.89-1
** Command line:
BOOT_IMAGE=/vmlinuz root=/dev/sda6
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 1.044753] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 1.045207] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2
[ 1.045971] ohci_hcd 0000:00:06.0: irq 11, io mem 0xf0804000
[ 1.102416] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.103503] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.105006] usb usb2: Product: OHCI Host Controller
[ 1.106981] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[ 1.108438] usb usb2: SerialNumber: 0000:00:06.0
[ 1.110125] hub 2-0:1.0: USB hub found
[ 1.110584] hub 2-0:1.0: 12 ports detected
[ 1.202482] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 1.203098] ata1.01: NODEV after polling detection
[ 1.203332] ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 1.203797] ata1.00: 488397168 sectors, multi 128: LBA48
[ 1.204603] ata2.00: configured for UDMA/100
[ 1.205668] ata1.00: configured for UDMA/100
[ 1.207573] scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
[ 1.211253] scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
[ 1.228629] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.229555] sd 0:0:0:0: [sda] Write Protect is off
[ 1.230132] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.230132] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.231138] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
[ 1.231643] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.234459] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.235230] sda: sda1 sda2 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 >
[ 1.236871] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.243332] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.244015] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.506811] Refined TSC clocksource calibration: 1728.996 MHz.
[ 1.507389] Switching to clocksource tsc
[ 1.637279] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 2.242998] udevd[285]: starting version 175
[ 2.481577] vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds
[ 2.481685] input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input1
[ 2.481770] vboxguest: misc device minor 59, IRQ 9, I/O port d040, MMIO at 00000000f0400000 (size 0x400000)
[ 2.481772] vboxguest: Successfully loaded version 5.0.20 (interface 0x00010004)
[ 2.520761] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 2.523997] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 2.527595] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.528585] ACPI: Power Button [PWRF]
[ 2.529121] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input4
[ 2.529750] ACPI: Sleep Button [SLPF]
[ 2.532014] ACPI: AC Adapter [AC] (on-line)
[ 2.535040] ACPI: Battery Slot [BAT0] (battery present)
[ 2.538403] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5
[ 2.555619] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.607993] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 2.744033] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6
[ 2.945487] intel8x0_measure_ac97_clock: measured 57944 usecs (15654 samples)
[ 2.947122] intel8x0: measured clock 270157 rejected
[ 3.305204] intel8x0_measure_ac97_clock: measured 55947 usecs (13921 samples)
[ 3.305708] intel8x0: measured clock 248824 rejected
[ 3.665133] intel8x0_measure_ac97_clock: measured 55907 usecs (15610 samples)
[ 3.667153] intel8x0: measured clock 279213 rejected
[ 3.669088] intel8x0: clocking to 48000
[ 4.246643] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 4.393878] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 4.425334] loop: module loaded
[ 5.416516] RPC: Registered named UNIX socket transport module.
[ 5.416944] RPC: Registered udp transport module.
[ 5.417652] RPC: Registered tcp transport module.
[ 5.418321] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.425359] FS-Cache: Loaded
[ 5.433478] FS-Cache: Netfs 'nfs' registered for caching
[ 5.440339] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 5.590707] fuse init (API version 7.17)
[ 7.066461] pcnet32 0000:00:03.0: eth0: link up, 100Mbps, full-duplex
[ 7.070541] pcnet32 0000:00:08.0: eth1: link up, 100Mbps, full-duplex
[ 7.167183] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7
[ 7.636663] apm: BIOS not found.
[ 8.003076] Bluetooth: Core ver 2.16
[ 8.003092] NET: Registered protocol family 31
[ 8.003094] Bluetooth: HCI device and connection manager initialized
[ 8.003095] Bluetooth: HCI socket layer initialized
[ 8.003097] Bluetooth: L2CAP socket layer initialized
[ 8.003236] Bluetooth: SCO socket layer initialized
[ 8.027568] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.027571] Bluetooth: BNEP filters: protocol multicast
[ 8.028335] Bluetooth: RFCOMM TTY layer initialized
[ 8.028345] Bluetooth: RFCOMM socket layer initialized
[ 8.028352] Bluetooth: RFCOMM ver 1.11
[ 8.700155] lp: driver loaded but no devices found
[ 8.749705] ppdev: user-space parallel port driver
[ 13.370706] vboxsf: Successfully loaded version 5.0.20 (interface 0x00010004)
[ 14.234469] VBoxService 5.0.20 r106931 (verbosity: 0) linux.x86 (Apr 28 2016 15:22:27) release log
[ 14.234473] 00:00:00.000309 main Log opened 2017-06-23T15:50:57.846536000Z
[ 14.234577] 00:00:00.000467 main OS Product: Linux
[ 14.234627] 00:00:00.000527 main OS Release: 3.2.0-4-686-pae
[ 14.234674] 00:00:00.000576 main OS Version: #1 SMP Debian 3.2.89-1
[ 14.234747] 00:00:00.000628 main Executable: /opt/VBoxGuestAdditions-5.0.20/sbin/VBoxService
[ 14.234749] 00:00:00.000631 main Process ID: 3431
[ 14.234751] 00:00:00.000633 main Package type: LINUX_32BITS_GENERIC
[ 14.238656] 00:00:00.004518 main 5.0.20 r106931 started. Verbose level = 0
[ 17.965860] eth0: no IPv6 routers present
[ 18.117067] eth1: no IPv6 routers present
[ 32.596155] hrtimer: interrupt took 2294406 ns
[ 65.736131] eth1: no IPv6 routers present
[ 113.468845] eth1: no IPv6 routers present
[ 161.709138] eth1: no IPv6 routers present
** Model information
not available
** Loaded modules:
vboxsf(O)
mperf
processor
cpufreq_powersave
cpufreq_stats
cpufreq_userspace
cpufreq_conservative
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
rfkill
binfmt_misc
uinput
fuse
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
snd_intel8x0
snd_ac97_codec
snd_pcm
snd_page_alloc
snd_seq
snd_seq_device
snd_timer
video
snd
battery
thermal_sys
ac
button
power_supply
psmouse
pcspkr
evdev
serio_raw
i2c_piix4
i2c_core
crc32c_intel
soundcore
ac97_bus
vboxguest(O)
ext4
crc16
jbd2
mbcache
sg
sr_mod
sd_mod
cdrom
crc_t10dif
ata_generic
ohci_hcd
ata_piix
ehci_hcd
libata
scsi_mod
usbcore
pcnet32
mii
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 IDE interface [0101]: Intel Corporation 631xESB/632xESB IDE Controller [8086:269e] (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at d000 [size=16]
Kernel driver in use: ata_piix
00:02.0 VGA compatible controller [0300]: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter [80ee:beef] (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Expansion ROM at <unassigned> [disabled]
00:03.0 Ethernet controller [0200]: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] [1022:2000] (rev 40)
Subsystem: Advanced Micro Devices [AMD] PCnet - Fast 79C971 [1022:2000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1500ns min, 63750ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d020 [size=32]
Region 1: Memory at f0000000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: pcnet32
00:04.0 System peripheral [0880]: InnoTek Systemberatung GmbH VirtualBox Guest Service [80ee:cafe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at d040 [size=32]
Region 1: Memory at f0400000 (32-bit, non-prefetchable) [size=4M]
Region 2: Memory at f0800000 (32-bit, prefetchable) [size=16K]
Kernel driver in use: vboxguest
00:05.0 Multimedia audio controller [0401]: Intel Corporation 82801AA AC'97 Audio Controller [8086:2415] (rev 01)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at d100 [size=256]
Region 1: I/O ports at d200 [size=64]
Kernel driver in use: snd_intel8x0
00:06.0 USB controller [0c03]: Apple Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0804000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 08)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 9
00:08.0 Ethernet controller [0200]: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] [1022:2000] (rev 40)
Subsystem: Advanced Micro Devices [AMD] PCnet - Fast 79C971 [1022:2000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1500ns min, 63750ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at d240 [size=32]
Region 1: Memory at f0805000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: pcnet32
00:0b.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (prog-if 20 [EHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f0806000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ehci_hcd
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 7.11
APT prefers oldoldstable-updates
APT policy: (500, 'oldoldstable-updates'), (500, 'oldoldstable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-4-686-pae (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-686-pae depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-686-pae recommends:
ii firmware-linux-free 3.2
ii libc6-i686 2.13-38+deb7u12
Versions of packages linux-image-3.2.0-4-686-pae suggests:
pn debian-kernel-handbook <none>
pn grub-pc | extlinux | lilo <none>
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-686-pae/postinst/depmod-error-initrd-3.2.0-4-686-pae: false
linux-image-3.2.0-4-686-pae/prerm/removing-running-kernel-3.2.0-4-686-pae: true
linux-image-3.2.0-4-686-pae/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-686-pae/postinst/missing-firmware-3.2.0-4-686-pae:
Reply to: