Bug#864562: No ethernet link on Olimex A20-Olinuxino Micro Rev. J, possibly PHY driver problem
On Fri, Jun 16, 2017 at 10:01:56PM +0200, Jean-Louis MOUNIER wrote:
> However, I have a new information about Jessie on my A20-Olinuxino
> Micro. Yesterday night, I installed Jessie on my board using my
> USB-Ethernet interface. Two informations.
>
> I first used a 128M micro SD, with no speed indication. The (small)
> size would have been enought for the installer but I could not boot
> the installer, probably because the card is too slow. I attempted
> another install with a Class10 8G Micro SD and then it ran fine. I
> don't know if it is really a bug.
Hello,
that is a known limitation with regard to the A20. For proper
operation in A20-based systems one has to use SDHC cards (which
in practice means cards between 4GB and 32GB). "Classic" SD 1.x
cards (in practice those with a capacity of 2GB or less) should
be avoided.
Regards,
Karsten
--
Gem. Par. 28 Abs. 4 Bundesdatenschutzgesetz widerspreche ich der Nutzung
sowie der Weitergabe meiner personenbezogenen Daten für Zwecke der
Werbung sowie der Markt- oder Meinungsforschung.
Reply to: