Your message dated Wed, 14 Jun 2017 00:48:19 +0100 with message-id <1497397699.3477.75.camel@decadent.org.uk> and subject line Re: Bug#863750: Acknowledgement (linux-image-4.11.0-trunk-amd64: always triggers remounts on systemd-automounts with gnome3) has caused the Debian Bug report #863750, regarding linux-image-4.11.0-trunk-amd64: always triggers remounts on systemd-automounts with gnome3 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 863750: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=863750 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-4.11.0-trunk-amd64: always triggers remounts on systemd-automounts with gnome3
- From: Jakobus Schürz <wertstoffe@nurfuerspam.de>
- Date: Wed, 31 May 2017 01:07:53 +0200
- Message-id: <149618567350.2527.2736628587502014615.reportbug@aldebaran>
Package: src:linux Version: 4.11-1~exp2 Severity: normal Dear Maintainer, I use Debian testing with some experimental kernel-packages. And I'm waitin for 4.11, there should be included a patch wich solves a boot delay on an ACPI-EC-Bug. Since i use 4.11 i consider automatic remounts on every unmount of automounts, setup with systemd. I have several automountpoints set, for a local fuse-filesystem, for an external usb-HD and for a remote ftp-server. I set up this automounts with a idle-timeout to unmount them automatically after a idle-time, where the mountpoint isn't used. Till kernel 4.10 it works how it should work. I fire up a ls-command on the automountpoint, the filesystem get mounted, and 10 seconds later, the kernel unmounts the filesystem. On kernel 4.11 udisks, gnome-shell and other gnome-processes remount the filesystem immediately after it gets unmounted. When i boot kernel 4.9 or 4.10, the remounts do not happen. When i mount kernel 4.11, the remounts occur. This is reproducible every boot. So i don't think, gnome is making a mistake, i think the kernel gives wrong informations to gnome. It's not the user-Konfiguration, the remounts are also triggered from gdm3. When i stop gdm3, and log out as user, no remounts happen. If i start gdm3 again (from debug-shell) the remounts will start again. Also on mountpoints from my login-user, which gdm should not see. Greetings Jakob -- Package-specific info: ** Version: Linux version 4.11.0-trunk-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170425 (Debian 6.3.0-16) ) #1 SMP Debian 4.11-1~exp2 (2017-05-05) ** Command line: \vmlinuz-4.11.0-trunk-amd64 root=UUID=9081c6de-4a5a-4b85-ac42-f3853e26c048 ro rootflags=subvol=@debian-testing quiet splash acpi_backlight=vendor i915.enable_fbc=0 i915.enable_rc6=7 i915.enable_psr=-1 acpi_osi=Linux log_buf_len=1M initrd=\initrd.img-4.11.0-trunk-amd64 ** Tainted: UO (4160) * Userspace-defined naughtiness. * Out-of-tree module has been loaded. ** Kernel log: [ 11.115842] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16 [ 11.115893] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17 [ 11.115950] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18 [ 11.116023] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19 [ 11.116087] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20 [ 11.118017] iwlwifi 0000:09:00.0: L1 Enabled - LTR Enabled [ 11.118261] iwlwifi 0000:09:00.0: L1 Enabled - LTR Enabled [ 11.129732] AVX2 version of gcm_enc/dec engaged. [ 11.129734] AES CTR mode by8 optimization enabled [ 11.140436] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 11.140439] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 11.140441] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 11.140442] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 11.140443] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 11.140445] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19 [ 11.140447] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 11.159355] Adding 3477500k swap on /dev/sda2. Priority:-1 extents:1 across:3477500k SSFS [ 11.180593] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21 [ 11.181370] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input22 [ 11.181439] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input23 [ 11.203859] random: crng init done [ 11.226061] input: HP WMI hotkeys as /devices/virtual/input/input24 [ 11.275536] iTCO_vendor_support: vendor-support=0 [ 11.276692] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 11.276746] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 11.276884] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 11.288560] alg: No test for pcbc(aes) (pcbc-aes-aesni) [ 11.290180] r8169 0000:08:00.0 enp8s0: renamed from eth0 [ 11.307828] pstore: using zlib compression [ 11.307839] pstore: Registered efi as persistent store backend [ 11.336186] ahci 0000:00:1f.2: port does not support device sleep [ 11.339358] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 11.341449] intel_rapl: Found RAPL domain package [ 11.341452] intel_rapl: Found RAPL domain core [ 11.341453] intel_rapl: Found RAPL domain uncore [ 11.341454] intel_rapl: Found RAPL domain dram [ 11.371039] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 11.413717] iwlwifi 0000:09:00.0 wlo1: renamed from wlan0 [ 11.460905] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 11.519354] usb 3-1: New USB device found, idVendor=8087, idProduct=8000 [ 11.519355] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 11.519529] hub 3-1:1.0: USB hub found [ 11.519607] hub 3-1:1.0: 8 ports detected [ 11.639394] systemd-journald[241]: Received request to flush runtime journal from PID 1 [ 11.648238] Bluetooth: Core ver 2.22 [ 11.648253] NET: Registered protocol family 31 [ 11.648254] Bluetooth: HCI device and connection manager initialized [ 11.648258] Bluetooth: HCI socket layer initialized [ 11.648270] Bluetooth: L2CAP socket layer initialized [ 11.648275] Bluetooth: SCO socket layer initialized [ 11.659642] usbcore: registered new interface driver btusb [ 11.671948] Bluetooth: hci0: read Intel version: 3707100180012d0d00 [ 11.682876] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.1.2d.d.bseq [ 11.682882] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.1.2d.d.bseq [ 11.837134] psmouse serio3: synaptics: queried max coordinates: x [..5716], y [..4886] [ 11.842011] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 11.869540] psmouse serio3: synaptics: queried min coordinates: x [1220..], y [986..] [ 11.929003] psmouse serio3: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x640000/0xa2400/0x0, board id: 2654, fw id: 1323623 [ 11.969279] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input15 [ 12.447248] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input26 [ 13.035327] vboxdrv: loading out-of-tree module taints kernel. [ 13.079744] vboxdrv: Found 4 processor cores [ 13.123359] vboxdrv: TSC mode is Invariant, tentative frequency 2394458943 Hz [ 13.123363] vboxdrv: Successfully loaded version 5.1.22_Debian (interface 0x00280000) [ 13.224633] VBoxNetFlt: Successfully started. [ 13.264944] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 13.264949] Bluetooth: BNEP filters: protocol multicast [ 13.264958] Bluetooth: BNEP socket layer initialized [ 14.006701] VBoxNetAdp: Successfully started. [ 14.016968] VBoxPciLinuxInit [ 14.023734] vboxpci: IOMMU not found (not registered) [ 14.669035] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready [ 14.675409] r8169 0000:08:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-3.fw [ 14.693185] r8169 0000:08:00.0 enp8s0: link down [ 14.693249] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready [ 14.698465] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 14.704655] iwlwifi 0000:09:00.0: L1 Enabled - LTR Enabled [ 14.704905] iwlwifi 0000:09:00.0: L1 Enabled - LTR Enabled [ 14.907398] iwlwifi 0000:09:00.0: L1 Enabled - LTR Enabled [ 14.907648] iwlwifi 0000:09:00.0: L1 Enabled - LTR Enabled [ 14.930242] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 14.939207] iwlwifi 0000:09:00.0: L1 Enabled - LTR Enabled [ 14.939453] iwlwifi 0000:09:00.0: L1 Enabled - LTR Enabled [ 15.140656] iwlwifi 0000:09:00.0: L1 Enabled - LTR Enabled [ 15.140904] iwlwifi 0000:09:00.0: L1 Enabled - LTR Enabled [ 15.158705] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 15.503343] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 18.183685] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 18.244572] wlo1: authenticate with c4:27:95:bd:74:51 [ 18.247633] wlo1: send auth to c4:27:95:bd:74:51 (try 1/3) [ 18.250070] wlo1: authenticated [ 18.251118] wlo1: associate with c4:27:95:bd:74:51 (try 1/3) [ 18.256041] wlo1: RX AssocResp from c4:27:95:bd:74:51 (capab=0x1411 status=0 aid=2) [ 18.256876] wlo1: associated [ 18.256936] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 18.290995] snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 18.322060] Bluetooth: RFCOMM TTY layer initialized [ 18.322065] Bluetooth: RFCOMM socket layer initialized [ 18.322070] Bluetooth: RFCOMM ver 1.11 [ 19.705728] fuse init (API version 7.26) ** Model information sys_vendor: Hewlett-Packard product_name: HP ProBook 450 G2 product_version: A3009C510002 chassis_vendor: Hewlett-Packard chassis_version: bios_vendor: Hewlett-Packard bios_version: M74 Ver. 01.41 board_vendor: Hewlett-Packard board_name: 2248 board_version: KBC Version 67.25 ** Loaded modules: fuse rfcomm ctr ccm pci_stub vboxpci(O) vboxnetadp(O) cmac bnep vboxnetflt(O) vboxdrv(O) joydev binfmt_misc btusb btrtl btbcm btintel bluetooth nls_ascii nls_cp437 vfat fat ext4 crc16 jbd2 fscrypto ecb mbcache intel_rapl x86_pkg_temp_thermal intel_powerclamp arc4 kvm_intel kvm irqbypass efi_pstore crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc iTCO_wdt iTCO_vendor_support rtsx_pci_sdmmc rtsx_pci_ms mmc_core memstick hp_wmi sparse_keymap snd_hda_codec_realtek snd_hda_codec_generic aesni_intel aes_x86_64 crypto_simd glue_helper cryptd intel_cstate intel_uncore iwlmvm snd_hda_codec_hdmi mac80211 intel_rapl_perf psmouse pcspkr efivars intel_pch_thermal iwlwifi snd_hda_intel snd_hda_codec snd_hda_core sr_mod r8169 cdrom cfg80211 snd_hwdep ehci_pci sg ehci_hcd snd_pcm lpc_ich rfkill mii snd_timer rtsx_pci mfd_core snd mei_me shpchp soundcore mei hp_accel lis3lv02d input_polldev battery hp_wireless ac intel_smartconnect tpm_infineon xt_set ip_set nfnetlink xt_conntrack nf_conntrack libcrc32c iptable_filter coretemp bmg160_i2c bmg160_core industrialio_triggered_buffer kfifo_buf industrialio parport_pc ppdev sunrpc lp parport efivarfs ip_tables x_tables autofs4 btrfs crc32c_generic xor raid6_pq sd_mod hid_generic usbhid hid ahci libahci crc32c_intel evdev serio_raw i915 libata xhci_pci i2c_algo_bit scsi_mod xhci_hcd drm_kms_helper usbcore drm usb_common thermal wmi video button ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller [8086:0a04] (rev 0b) Subsystem: Hewlett-Packard Company Haswell-ULT DRAM Controller [103c:2248] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: hsw_uncore 00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 0b) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Haswell-ULT Integrated Graphics Controller [103c:2248] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 45 Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 6000 [size=64] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio Controller [8086:0a0c] (rev 0b) Subsystem: Hewlett-Packard Company Haswell-ULT HD Audio Controller [103c:2248] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 52 Region 0: Memory at c0810000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC [8086:9c31] (rev 04) (prog-if 30 [XHCI]) Subsystem: Hewlett-Packard Company 8 Series USB xHCI HC [103c:2248] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 44 Region 0: Memory at c0800000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 00:16.0 Communication controller [0780]: Intel Corporation 8 Series HECI #0 [8086:9c3a] (rev 04) Subsystem: Hewlett-Packard Company 8 Series HECI [103c:2248] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 47 Region 0: Memory at c0819000 (64-bit, non-prefetchable) [size=32] Capabilities: <access denied> Kernel driver in use: mei_me Kernel modules: mei_me 00:1b.0 Audio device [0403]: Intel Corporation 8 Series HD Audio Controller [8086:9c20] (rev 04) Subsystem: Hewlett-Packard Company 8 Series HD Audio Controller [103c:2248] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 50 Region 0: Memory at c0814000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 1 [8086:9c10] (rev e4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 40 Bus: primary=00, secondary=01, subordinate=06, sec-latency=0 Memory behind bridge: c0700000-c07fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 2 [8086:9c12] (rev e4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 41 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00004000-00005fff Memory behind bridge: c0600000-c06fffff Prefetchable memory behind bridge: 00000000afb00000-00000000afcfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 3 [8086:9c14] (rev e4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 42 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: c0500000-c05fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 4 [8086:9c16] (rev e4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 43 Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 Memory behind bridge: c0400000-c04fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller [0c03]: Intel Corporation 8 Series USB EHCI #1 [8086:9c26] (rev 04) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company 8 Series USB EHCI [103c:2248] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 17 Region 0: Memory at c081d000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1f.0 ISA bridge [0601]: Intel Corporation 8 Series LPC Controller [8086:9c43] (rev 04) Subsystem: Hewlett-Packard Company 8 Series LPC Controller [103c:2248] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] [8086:9c03] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company 8 Series SATA Controller 1 [AHCI mode] [103c:2248] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 46 Region 0: I/O ports at 6088 [size=8] Region 1: I/O ports at 6094 [size=4] Region 2: I/O ports at 6080 [size=8] Region 3: I/O ports at 6090 [size=4] Region 4: I/O ports at 6060 [size=32] Region 5: Memory at c081c000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:1f.6 Signal processing controller [1180]: Intel Corporation 8 Series Thermal [8086:9c24] (rev 04) Subsystem: Hewlett-Packard Company 8 Series Thermal [103c:2248] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at c081b000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel_pch_thermal Kernel modules: intel_pch_thermal 07:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader [10ec:5227] (rev 01) Subsystem: Hewlett-Packard Company RTS5227 PCI Express Card Reader [103c:2248] Physical Slot: 1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 48 Region 0: Memory at c0600000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: rtsx_pci Kernel modules: rtsx_pci 08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 10) Subsystem: Hewlett-Packard Company RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [103c:2248] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 49 Region 0: I/O ports at 3000 [size=256] Region 2: Memory at c0504000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at c0500000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 09:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b1] (rev bb) Subsystem: Intel Corporation Dual Band Wireless-AC 7260 [8086:4070] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 51 Region 0: Memory at c0400000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi Kernel modules: iwlwifi ** USB devices: Bus 003 Device 002: ID 8087:8000 Intel Corp. Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 062a:4101 Creative Labs Wireless Keyboard/Mouse Bus 001 Device 003: ID 138a:003f Validity Sensors, Inc. VFS495 Fingerprint Reader Bus 001 Device 002: ID 8087:07dc Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 9.0 APT prefers testing APT policy: (990, 'testing'), (800, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.11.0-trunk-amd64 (SMP w/4 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.11.0-trunk-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.130 ii kmod 23-2 ii linux-base 4.5 Versions of packages linux-image-4.11.0-trunk-amd64 recommends: ii firmware-linux-free 3.4 ii irqbalance 1.1.0-2.3 Versions of packages linux-image-4.11.0-trunk-amd64 suggests: pn debian-kernel-handbook <none> ii extlinux 3:6.03+dfsg-14.1 ii grub-efi-amd64 2.02~beta3-5 pn linux-doc-4.11 <none> Versions of packages linux-image-4.11.0-trunk-amd64 is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> ii firmware-intel-sound 20161130-2 ii firmware-intelwimax 20161130-2 pn firmware-ipw2x00 <none> pn firmware-ivtv <none> ii firmware-iwlwifi 20161130-2 pn firmware-libertas <none> pn firmware-linux-nonfree <none> ii firmware-misc-nonfree 20161130-2 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> ii firmware-realtek 20161130-2 pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
--- End Message ---
--- Begin Message ---
- To: 863750-done@bugs.debian.org
- Subject: Re: Bug#863750: Acknowledgement (linux-image-4.11.0-trunk-amd64: always triggers remounts on systemd-automounts with gnome3)
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Wed, 14 Jun 2017 00:48:19 +0100
- Message-id: <1497397699.3477.75.camel@decadent.org.uk>
- In-reply-to: <[🔎] b13ed107-18be-769c-6866-b298a6f49e1b@nurfuerspam.de>
- References: <149618567350.2527.2736628587502014615.reportbug@aldebaran> <handler.863750.B.149618568312616.ack@bugs.debian.org> <[🔎] b13ed107-18be-769c-6866-b298a6f49e1b@nurfuerspam.de>
Version: 4.11.3-1~exp1 On Tue, 2017-06-13 at 21:53 +0200, Jakob Schürz wrote: > Hi there! > > With the current kernel > Linux aldebaran 4.11.0-trunk-amd64 #1 SMP Debian 4.11.3-1~exp1 > (2017-06-05) x86_64 GNU/Linux > > There are no more automatic remounts of automountpoints with gnome. > > This bug can be closed. Thanks for letting us know. Ben. -- Ben Hutchings Humans are not rational beings; they are rationalising beings.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---