Re: Bug#864457: [d-i daily hd-media 20170608] kernel doesn't initialize USB ports inside d-i on a sunxi-based system
Sorry, that should have been a X-Debbugs-CC instead of a plain CC
to debian-kernel. Reply-to set accordingly in this mail to
direct answers on debian-kernel to the bugreport as well.
Regards,
Karsten
On Thu, Jun 08, 2017 at 10:50:57PM +0200, Karsten Merker wrote:
> Package: installation-reports
>
> Boot method: hd-media tarball from USB stick
> Image version: https://d-i.debian.org/daily-images/armhf/daily/hd-media/hd-media.tar.gz
> Date: 2017-06-08
>
> Machine: LeMaker Banana Pi
> Processor: Allwinner A20 (2x Cortex A7)
> Memory: 1GB
> Base System Installation Checklist:
> [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
>
> Initial boot: [O]
> Detect network card: [ ]
> Configure network: [ ]
> Detect CD: [E]
> Load installer modules: [ ]
> Detect hard drives: [ ]
> Partition hard drives: [ ]
> Install base system: [ ]
> Clock/timezone setup: [ ]
> User/password setup: [ ]
> Install tasks: [ ]
> Install boot loader: [ ]
> Overall install: [ ]
>
> Comments/Problems:
> Installation method is a d-i hd-media tarball and a Debian CD/DVD
> ISO image on a USB stick. Booting d-i from the stick works fine,
> but inside the installer the USB ports are dead and no USB
> devices get recognized by the kernel.
>
> In an installed system on the same hardware (installed with the
> netboot image), the USB ports work normally. In the d-i
> environment, the ehci platform driver gets loaded, but for some
> reason doesn't initialize the actual host controller. All
> relevant USB host driver modules appear to be there:
>
> Module Size Used by
> usb_storage 45835 0
> phy_generic 4686 1 sunxi
> musb_hdrc 113325 1 sunxi
> udc_core 26444 1 musb_hdrc
> ohci_platform 4786 0
> ohci_hcd 37898 1 ohci_platform
> ehci_platform 5462 0
> ehci_hcd 64996 1 ehci_platform
> phy_sun4i_usb 8637 1 sunxi
> extcon_core 13223 2 sunxi,phy_sun4i_usb
> usbcore 196310 6 usb_storage,ehci_hcd,musb_hdrc,ohci_hcd,ehci_platform,ohci_platform
> usb_common 3659 5 udc_core,sunxi,musb_hdrc,phy_sun4i_usb,usbcore
>
> In the d-i environment:
> [ 2.694030] usbcore: registered new interface driver usbfs
> [ 2.699958] usbcore: registered new interface driver hub
> [ 2.703305] SCSI subsystem initialized
> [ 2.716192] usbcore: registered new device driver usb
> [ 2.724836] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 2.736947] sunxi-mmc 1c0f000.mmc: base:0xf08f4000 irq:28
> [ 2.750665] ehci-platform: EHCI generic platform driver
> [ 2.751130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 2.752551] ohci-platform: OHCI generic platform driver
>
> While on the installed system:
> [ 2.162185] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 2.168314] ehci-platform: EHCI generic platform driver
> [ 6.187194] ehci-platform 1c14000.usb: EHCI Host Controller
> [ 6.187256] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 2
> [ 6.192414] ehci-platform 1c14000.usb: irq 30, io mem 0x01c14000
> [ 6.205562] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
> [ 6.206170] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> [ 6.206184] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 6.206191] usb usb2: Product: EHCI Host Controller
> [ 6.206198] usb usb2: Manufacturer: Linux 4.9.0-3-armmp-lpae ehci_hcd
> [ 6.206204] usb usb2: SerialNumber: 1c14000.usb
> [ 6.207443] hub 2-0:1.0: USB hub found
> [ 6.207557] hub 2-0:1.0: 1 port detected
> [ 6.209230] ehci-platform 1c1c000.usb: EHCI Host Controller
> [ 6.209289] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
> [ 6.216403] ehci-platform 1c1c000.usb: irq 34, io mem 0x01c1c000
> [ 6.230524] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
> [ 6.231044] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
> [ 6.231058] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 6.231066] usb usb3: Product: EHCI Host Controller
> [ 6.231072] usb usb3: Manufacturer: Linux 4.9.0-3-armmp-lpae ehci_hcd
> [ 6.231079] usb usb3: SerialNumber: 1c1c000.usb
>
> We might have a problem with the USB port power supply here.
> Comparing the available modules between the installed system and
> the d-i environment (full list below) and looking for possibly
> related modules shows that the "axp20x_regulator" and
> "axp20x_usb_power" modules are available in the installed system,
> but not in the d-i environment. I am not sure whether
> axp20x_usb_power is really responsible for providing power _to_
> the USB hosts ports, though. It could be that it is responsible
> for powering the system _from_ a USB-OTG port, so it might be
> unrelated to the problem at hand. "axp20x_regulator" would
> possibly be a candidate for a power-supply problem. I have also
> tried using a powered USB hub between the USB stick and the host
> port, but even then no USB device gets recognized, which kind of
> speaks against the theory of only a missing 5V-supply on the USB
> port as the sole source of the problem. Possibly the ehci/ohci
> platform drivers depend on the axp20x PMIC modules for full
> initialization, but that is at the moment only a wild guess.
> Perhaps somebody at debian-kernel (CCed) can provide further
> insight into this.
>
> Module list with working USB (installed system):
> ------------------------------------------------
> lsmod
> Module Size Used by
> sd_mod 32795 0
> sg 22323 0
> uas 12934 0
> usb_storage 45835 1 uas
> evdev 11908 0
> sun4i_codec 11199 3
> snd_soc_core 144722 1 sun4i_codec
> axp20x_usb_power 3578 0
> snd_pcm_dmaengine 3583 1 snd_soc_core
> snd_pcm 81646 2 snd_pcm_dmaengine,snd_soc_core
> snd_timer 19933 1 snd_pcm
> axp20x_pek 2994 0
> nvmem_sunxi_sid 2159 0
> snd 54635 3 snd_timer,snd_soc_core,snd_pcm
> nvmem_core 9512 1 nvmem_sunxi_sid
> soundcore 5571 1 snd
> sun4i_ts 4054 0
> ir_lirc_codec 5112 0
> sunxi_wdt 3376 0
> lirc_dev 8587 1 ir_lirc_codec
> sunxi_cir 3735 0
> sun4i_ss 17373 0
> des_generic 17259 1 sun4i_ss
> spi_sun4i 4198 0
> leds_gpio 3390 0
> cpufreq_dt 4136 0
> ip_tables 12041 0
> x_tables 14762 1 ip_tables
> autofs4 32600 2
> ext4 550734 2
> crc16 1274 1 ext4
> jbd2 94046 1 ext4
> crc32c_generic 1862 2
> fscrypto 15434 1 ext4
> ecb 2191 0
> mbcache 5508 3 ext4
> axp20x_regulator 15203 1
> realtek 2775 0
> dwmac_sunxi 2431 0
> stmmac_platform 4942 1 dwmac_sunxi
> stmmac 97888 3 stmmac_platform,dwmac_sunxi
> i2c_mv64xxx 8237 0
> ahci_sunxi 2915 0
> libahci_platform 6494 1 ahci_sunxi
> libahci 23377 2 ahci_sunxi,libahci_platform
> libata 192617 3 ahci_sunxi,libahci_platform,libahci
> sunxi 8845 0
> scsi_mod 187707 5 sd_mod,usb_storage,libata,uas,sg
> ohci_platform 5042 0
> phy_generic 4686 2 sunxi
> ohci_hcd 37898 1 ohci_platform
> musb_hdrc 113261 1 sunxi
> ehci_platform 5718 0
> ehci_hcd 64996 1 ehci_platform
> udc_core 26444 1 musb_hdrc
> phy_sun4i_usb 8637 10 sunxi
> extcon_core 13223 2 sunxi,phy_sun4i_usb
> usbcore 195286 7
> usb_storage,ehci_hcd,musb_hdrc,uas,ohci_hcd,ehci_platform,ohci_platform
> sunxi_mmc 12421 0
> usb_common 3659 5
> udc_core,sunxi,musb_hdrc,phy_sun4i_usb,usbcore
>
>
> Module-list without working USB (inside d-i)
> --------------------------------------------
> Module Size Used by
> loop 17598 0
> isofs 32049 0
> vfat 10313 0
> fat 57205 1 vfat
> ext4 551182 0
> crc16 1274 1 ext4
> jbd2 94046 1 ext4
> crc32c_generic 1862 0
> fscrypto 15434 1 ext4
> mbcache 5508 1 ext4
> usb_storage 45835 0
> sunxi 8845 0
> ahci_sunxi 2915 0
> libahci_platform 6494 1 ahci_sunxi
> libahci 23377 2 ahci_sunxi,libahci_platform
> phy_generic 4686 1 sunxi
> libata 192873 3 ahci_sunxi,libahci_platform,libahci
> musb_hdrc 113325 1 sunxi
> udc_core 26444 1 musb_hdrc
> ohci_platform 4786 0
> ohci_hcd 37898 1 ohci_platform
> ehci_platform 5462 0
> ehci_hcd 64996 1 ehci_platform
> phy_sun4i_usb 8637 1 sunxi
> extcon_core 13223 2 sunxi,phy_sun4i_usb
> scsi_mod 187963 2 usb_storage,libata
> usbcore 196310 6 usb_storage,ehci_hcd,musb_hdrc,ohci_hcd,ehci_platform,ohci_platform
> sunxi_mmc 12421 0
> usb_common 3659 5 udc_core,sunxi,musb_hdrc,phy_sun4i_usb,usbcore
> leds_gpio 3390 0
>
> Kernel log from the installed system:
> [ 0.000000] Booting Linux on physical CPU 0x0
> [ 0.000000] Linux version 4.9.0-3-armmp-lpae (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-1 (2017-06-04)
> [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=30c5387d
> [ 0.000000] CPU: div instructions available: patching division code
> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
> [ 0.000000] OF: fdt:Machine model: LeMaker Banana Pi
> [ 0.000000] efi: Getting EFI parameters from FDT:
> [ 0.000000] efi: UEFI not found.
> [ 0.000000] cma: Reserved 16 MiB at 0x000000007e800000
> [ 0.000000] Memory policy: Data cache writealloc
> [ 0.000000] On node 0 totalpages: 261738
> [ 0.000000] free_area_init_node: node 0, pgdat c10e5b40, node_mem_map ef6f9000
> [ 0.000000] DMA zone: 1728 pages used for memmap
> [ 0.000000] DMA zone: 0 pages reserved
> [ 0.000000] DMA zone: 196608 pages, LIFO batch:31
> [ 0.000000] HighMem zone: 65130 pages, LIFO batch:15
> [ 0.000000] psci: probing for conduit method from DT.
> [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
> [ 0.000000] percpu: Embedded 14 pages/cpu @ef6c1000 s27724 r8192 d21428 u57344
> [ 0.000000] pcpu-alloc: s27724 r8192 d21428 u57344 alloc=14*4096
> [ 0.000000] pcpu-alloc: [0] 0 [0] 1
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260010
> [ 0.000000] Kernel command line: console=ttyS0,115200 quiet
> [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> [ 0.000000] Memory: 988540K/1046952K available (8192K kernel code, 977K rwdata, 2256K rodata, 2048K init, 337K bss, 42028K reserved, 16384K cma-reserved, 244136K highmem)
> [ 0.000000] Virtual kernel memory layout:
> vector : 0xffff0000 - 0xffff1000 ( 4 kB)
> fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
> vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
> lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
> pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
> modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
> .text : 0xc0008000 - 0xc0a00000 (10208 kB)
> .init : 0xc0e00000 - 0xc1000000 (2048 kB)
> .data : 0xc1000000 - 0xc10f4504 ( 978 kB)
> .bss : 0xc10f6000 - 0xc114a584 ( 338 kB)
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] Build-time adjustment of leaf fanout to 32.
> [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
> [ 0.000000] NR_IRQS:16 nr_irqs:16 16
> [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
> [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
> [ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
> [ 0.000019] Switching to timer-based delay loop, resolution 41ns
> [ 0.002753] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
> [ 0.003667] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 12741736309 ns
> [ 0.004530] Console: colour dummy device 80x30
> [ 0.004570] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000)
> [ 0.004586] pid_max: default: 32768 minimum: 301
> [ 0.004963] Security Framework initialized
> [ 0.004973] Yama: disabled by default; enable with sysctl kernel.yama.*
> [ 0.005011] AppArmor: AppArmor disabled by boot time parameter
> [ 0.005109] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
> [ 0.005118] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
> [ 0.006338] CPU: Testing write buffer coherency: ok
> [ 0.006405] ftrace: allocating 27476 entries in 81 pages
> [ 0.066041] /cpus/cpu@0 missing clock-frequency property
> [ 0.066081] /cpus/cpu@1 missing clock-frequency property
> [ 0.066096] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
> [ 0.066125] Setting up static identity map for 0x40200000 - 0x40200098
> [ 0.071844] EFI services will not be available.
> [ 0.083507] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
> [ 0.083735] Brought up 2 CPUs
> [ 0.083748] SMP: Total of 2 processors activated (96.00 BogoMIPS).
> [ 0.083753] CPU: All CPU(s) started in HYP mode.
> [ 0.083756] CPU: Virtualization extensions available.
> [ 0.084894] devtmpfs: initialized
> [ 0.097116] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
> [ 0.097627] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
> [ 0.097651] futex hash table entries: 512 (order: 3, 32768 bytes)
> [ 0.098716] pinctrl core: initialized pinctrl subsystem
> [ 0.100966] NET: Registered protocol family 16
> [ 0.102922] DMA: preallocated 256 KiB pool for atomic coherent allocations
> [ 0.106172] No ATAGs?
> [ 0.106217] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
> [ 0.106223] hw-breakpoint: maximum watchpoint size is 8 bytes.
> [ 0.107202] Serial: AMBA PL011 UART driver
> [ 0.139793] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 0.142829] reg-fixed-voltage usb0-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb0_vbus_pin@0, deferring probe
> [ 0.142884] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
> [ 0.142918] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
> [ 0.144119] reg-fixed-voltage gmac-3v3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/gmac_power_pin@0, deferring probe
> [ 0.146863] vgaarb: loaded
> [ 0.147981] media: Linux media interface: v0.10
> [ 0.148040] Linux video capture interface: v2.00
> [ 0.148128] pps_core: LinuxPPS API ver. 1 registered
> [ 0.148134] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
> [ 0.148158] PTP clock support registered
> [ 0.150379] clocksource: Switched to clocksource arch_sys_counter
> [ 0.203606] VFS: Disk quotas dquot_6.6.0
> [ 0.203726] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [ 0.205291] simple-framebuffer 7fe79000.framebuffer: framebuffer at 0x7fe79000, 0x178e00 bytes, mapped to 0xf0900000
> [ 0.205305] simple-framebuffer 7fe79000.framebuffer: format=x8r8g8b8, mode=656x536x32, linelength=2880
> [ 0.212467] Console: switching to colour frame buffer device 82x33
> [ 0.218547] simple-framebuffer 7fe79000.framebuffer: fb0: simplefb registered!
> [ 0.233424] NET: Registered protocol family 2
> [ 0.234387] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
> [ 0.234476] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
> [ 0.234601] TCP: Hash tables configured (established 8192 bind 8192)
> [ 0.234694] UDP hash table entries: 512 (order: 2, 16384 bytes)
> [ 0.234753] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
> [ 0.235222] NET: Registered protocol family 1
> [ 0.235273] PCI: CLS 0 bytes, default 64
> [ 0.236031] Unpacking initramfs...
> [ 1.565481] Freeing initrd memory: 16064K (c9050000 - ca000000)
> [ 1.565842] kvm [1]: 8-bit VMID
> [ 1.565852] kvm [1]: IDMAP page: 40201000
> [ 1.565857] kvm [1]: HYP VA range: c0000000:ffffffff
> [ 1.566460] kvm [1]: Hyp mode initialized successfully
> [ 1.566541] kvm [1]: vgic-v2@1c84000
> [ 1.566747] kvm [1]: vgic interrupt IRQ16
> [ 1.566775] kvm [1]: virtual timer IRQ20
> [ 1.567785] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
> [ 1.569825] audit: initializing netlink subsys (disabled)
> [ 1.569927] audit: type=2000 audit(1.525:1): initialized
> [ 1.571529] workingset: timestamp_bits=14 max_order=18 bucket_order=4
> [ 1.571708] zbud: loaded
> [ 1.575669] bounce: pool size: 64 pages
> [ 1.575840] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
> [ 1.576054] io scheduler noop registered
> [ 1.576061] io scheduler deadline registered
> [ 1.576159] io scheduler cfq registered (default)
> [ 1.582614] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
> [ 1.599258] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> [ 1.602034] console [ttyS0] disabled
> [ 1.622530] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 45, base_baud = 1500000) is a U6_16550A
> [ 1.633355] console [ttyS0] enabled
> [ 1.657127] 1c28c00.serial: ttyS1 at MMIO 0x1c28c00 (irq = 46, base_baud = 1500000) is a U6_16550A
> [ 1.680945] 1c29c00.serial: ttyS2 at MMIO 0x1c29c00 (irq = 47, base_baud = 1500000) is a U6_16550A
> [ 1.681964] Serial: AMBA driver
> [ 1.685639] libphy: Fixed MDIO Bus: probed
> [ 1.686618] mousedev: PS/2 mouse device common for all mice
> [ 1.688963] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
> [ 1.688972] sunxi-rtc 1c20d00.rtc: RTC enabled
> [ 1.691854] ledtrig-cpu: registered to indicate activity on CPUs
> [ 1.692808] NET: Registered protocol family 10
> [ 1.694071] mip6: Mobile IPv6
> [ 1.694090] NET: Registered protocol family 17
> [ 1.694110] mpls_gso: MPLS GSO support
> [ 1.694198] ThumbEE CPU extension supported.
> [ 1.694216] Registering SWP/SWPB emulation handler
> [ 1.695421] registered taskstats version 1
> [ 1.695532] zswap: loaded using pool lzo/zbud
> [ 1.695769] ima: No TPM chip found, activating TPM-bypass!
> [ 1.706923] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 01:16:32 UTC (4592)
> [ 1.706938] sr_init: No PMIC hook to init smartreflex
> [ 1.707075] sr_init: platform driver register failed for SR
> [ 1.712987] PM: Hibernation image not present or could not be loaded.
> [ 1.713173] vcc3v0: disabling
> [ 1.713181] vcc3v3: disabling
> [ 1.713185] vcc5v0: disabling
> [ 1.713190] usb0-vbus: disabling
> [ 1.713195] usb1-vbus: disabling
> [ 1.713203] usb2-vbus: disabling
> [ 1.713208] gmac-3v3: disabling
> [ 1.716127] Freeing unused kernel memory: 2048K (c0e00000 - c1000000)
> [ 1.849203] random: systemd-udevd: uninitialized urandom read (16 bytes read)
> [ 1.850052] random: systemd-udevd: uninitialized urandom read (16 bytes read)
> [ 1.859722] random: udevadm: uninitialized urandom read (16 bytes read)
> [ 1.861972] random: udevadm: uninitialized urandom read (16 bytes read)
> [ 1.862575] random: udevadm: uninitialized urandom read (16 bytes read)
> [ 1.863175] random: udevadm: uninitialized urandom read (16 bytes read)
> [ 1.863699] random: udevadm: uninitialized urandom read (16 bytes read)
> [ 1.864160] random: udevadm: uninitialized urandom read (16 bytes read)
> [ 1.864704] random: udevadm: uninitialized urandom read (16 bytes read)
> [ 1.865233] random: udevadm: uninitialized urandom read (16 bytes read)
> [ 2.145584] usbcore: registered new interface driver usbfs
> [ 2.145701] usbcore: registered new interface driver hub
> [ 2.145897] usbcore: registered new device driver usb
> [ 2.151595] sunxi-mmc 1c0f000.mmc: Got CD GPIO
> [ 2.162185] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 2.168314] ehci-platform: EHCI generic platform driver
> [ 2.174210] SCSI subsystem initialized
> [ 2.183942] libata version 3.00 loaded.
> [ 2.185793] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 2.187268] ohci-platform: OHCI generic platform driver
> [ 2.193338] sunxi-mmc 1c0f000.mmc: base:0xf08fc000 irq:28
> [ 2.250614] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
> [ 2.250635] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
> [ 2.250718] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
> [ 2.250732] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc
> [ 2.256749] mmc0: host does not support reading read-only switch, assuming write-enable
> [ 2.259395] mmc0: new high speed SDHC card at address 0007
> [ 2.271211] scsi host0: ahci-sunxi
> [ 2.271636] mmcblk0: mmc0:0007 SD16G 14.5 GiB
> [ 2.271818] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 33
> [ 2.273970] axp20x-i2c 0-0034: AXP20x variant AXP209 found
> [ 2.294951] mmcblk0: p1 p2 p3 < p5 >
> [ 2.329098] axp20x-i2c 0-0034: AXP20X driver loaded
> [ 2.442268] sun7i-dwmac 1c50000.ethernet: no reset control found
> [ 2.442284] Ring mode enabled
> [ 2.442290] DMA HW capability register supported
> [ 2.442297] Normal descriptors
> [ 2.480118] libphy: stmmac: probed
> [ 2.480141] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
> [ 2.480148] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
> [ 2.585733] random: fast init done
> [ 2.593401] ata1: SATA link down (SStatus 0 SControl 300)
> [ 2.844448] PM: Starting manual resume from disk
> [ 2.844476] PM: Hibernation image partition 179:5 present
> [ 2.844481] PM: Looking for hibernation image.
> [ 2.845464] PM: Image not found (code -22)
> [ 2.845472] PM: Hibernation image not present or could not be loaded.
> [ 3.134552] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
> [ 3.717563] systemd[1]: System time before build time, advancing clock.
> [ 3.826804] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 3.853061] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
> [ 3.853801] systemd[1]: Detected architecture arm.
> [ 3.855569] systemd[1]: Set hostname to <debian>.
> [ 4.363260] systemd[1]: Reached target Remote File Systems.
> [ 4.365063] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
> [ 4.365706] systemd[1]: Listening on fsck to fsckd communication Socket.
> [ 4.366141] systemd[1]: Listening on Journal Socket (/dev/log).
> [ 4.366615] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
> [ 4.367007] systemd[1]: Listening on udev Control Socket.
> [ 4.367341] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
> [ 4.564782] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
> [ 4.860627] systemd-journald[155]: Received request to flush runtime journal from PID 1
> [ 5.734850] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
> [ 5.768973] Registered IR keymap rc-empty
> [ 5.770746] input: sunxi-ir as /devices/platform/soc@01c00000/1c21800.ir/rc/rc0/input0
> [ 5.770790] rc rc0: sunxi-ir as /devices/platform/soc@01c00000/1c21800.ir/rc/rc0
> [ 5.781711] sunxi-ir 1c21800.ir: initialized sunXi IR driver
> [ 5.785689] sun4i-ss 1c15000.crypto-engine: no reset control found
> [ 5.787331] sun4i-ss 1c15000.crypto-engine: Die ID 0
> [ 5.799129] lirc_dev: IR Remote Control driver registered, major 242
> [ 5.809343] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-ir) registered at minor = 0
> [ 5.809362] IR LIRC bridge handler initialized
> [ 5.996254] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok
> [ 6.013662] input: axp20x-pek as /devices/platform/soc@01c00000/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input1
> [ 6.139563] usb_phy_generic.0.auto supply vcc not found, using dummy regulator
> [ 6.140960] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
> [ 6.140987] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
> [ 6.155492] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 6.155509] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 6.155517] usb usb1: Product: MUSB HDRC host driver
> [ 6.155524] usb usb1: Manufacturer: Linux 4.9.0-3-armmp-lpae musb-hcd
> [ 6.155529] usb usb1: SerialNumber: musb-hdrc.1.auto
> [ 6.164200] hub 1-0:1.0: USB hub found
> [ 6.164314] hub 1-0:1.0: 1 port detected
> [ 6.187194] ehci-platform 1c14000.usb: EHCI Host Controller
> [ 6.187256] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 2
> [ 6.192414] ehci-platform 1c14000.usb: irq 30, io mem 0x01c14000
> [ 6.205562] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
> [ 6.206170] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> [ 6.206184] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 6.206191] usb usb2: Product: EHCI Host Controller
> [ 6.206198] usb usb2: Manufacturer: Linux 4.9.0-3-armmp-lpae ehci_hcd
> [ 6.206204] usb usb2: SerialNumber: 1c14000.usb
> [ 6.207443] hub 2-0:1.0: USB hub found
> [ 6.207557] hub 2-0:1.0: 1 port detected
> [ 6.209230] ehci-platform 1c1c000.usb: EHCI Host Controller
> [ 6.209289] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
> [ 6.216403] ehci-platform 1c1c000.usb: irq 34, io mem 0x01c1c000
> [ 6.230524] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
> [ 6.231044] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
> [ 6.231058] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 6.231066] usb usb3: Product: EHCI Host Controller
> [ 6.231072] usb usb3: Manufacturer: Linux 4.9.0-3-armmp-lpae ehci_hcd
> [ 6.231079] usb usb3: SerialNumber: 1c1c000.usb
> [ 6.232272] hub 3-0:1.0: USB hub found
> [ 6.232387] hub 3-0:1.0: 1 port detected
> [ 6.234127] ohci-platform 1c14400.usb: Generic Platform OHCI controller
> [ 6.234187] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
> [ 6.236893] ohci-platform 1c14400.usb: irq 31, io mem 0x01c14400
> [ 6.300133] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> [ 6.300151] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 6.300159] usb usb4: Product: Generic Platform OHCI controller
> [ 6.300165] usb usb4: Manufacturer: Linux 4.9.0-3-armmp-lpae ohci_hcd
> [ 6.300171] usb usb4: SerialNumber: 1c14400.usb
> [ 6.304164] hub 4-0:1.0: USB hub found
> [ 6.304300] hub 4-0:1.0: 1 port detected
> [ 6.306155] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
> [ 6.306219] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 5
> [ 6.314473] ohci-platform 1c1c400.usb: irq 35, io mem 0x01c1c400
> [ 6.345345] Adding 999420k swap on /dev/mmcblk0p5. Priority:-1 extents:1 across:999420k SSFS
> [ 6.375051] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> [ 6.375069] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 6.375077] usb usb5: Product: Generic Platform OHCI controller
> [ 6.375084] usb usb5: Manufacturer: Linux 4.9.0-3-armmp-lpae ohci_hcd
> [ 6.375090] usb usb5: SerialNumber: 1c1c400.usb
> [ 6.376660] hub 5-0:1.0: USB hub found
> [ 6.376768] hub 5-0:1.0: 1 port detected
> [ 6.537799] usb 2-1: new high-speed USB device number 2 using ehci-platform
> [ 6.692534] usb 2-1: New USB device found, idVendor=05e3, idProduct=0608
> [ 6.692552] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
> [ 6.692559] usb 2-1: Product: USB2.0 Hub
> [ 6.694776] hub 2-1:1.0: USB hub found
> [ 6.695640] hub 2-1:1.0: 4 ports detected
> [ 6.985459] usb 2-1.2: new high-speed USB device number 3 using ehci-platform
> [ 7.103260] usb 2-1.2: New USB device found, idVendor=058f, idProduct=6387
> [ 7.103278] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 7.103285] usb 2-1.2: Product: Intenso Rainbow Line
> [ 7.103291] usb 2-1.2: Manufacturer: Alcor Tech
> [ 7.103297] usb 2-1.2: SerialNumber: 13012400750054
> [ 7.165641] usb-storage 2-1.2:1.0: USB Mass Storage device detected
> [ 7.168149] scsi host1: usb-storage 2-1.2:1.0
> [ 7.168894] usbcore: registered new interface driver usb-storage
> [ 7.178027] usbcore: registered new interface driver uas
> [ 7.740318] EXT4-fs (mmcblk0p1): mounting ext2 file system using the ext4 subsystem
> [ 7.748493] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
> [ 8.163053] RX IPC Checksum Offload disabled
> [ 8.163069] No MAC Management Counters available
> [ 8.163087] sun7i-dwmac 1c50000.ethernet eth0: fail to init PTP.
> [ 8.164833] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 8.203098] scsi 1:0:0:0: Direct-Access Intenso Rainbow Line 8.07 PQ: 0 ANSI: 4
> [ 8.241247] scsi 1:0:0:0: Attached scsi generic sg0 type 0
> [ 8.253955] sd 1:0:0:0: [sda] 7680000 512-byte logical blocks: (3.93 GB/3.66 GiB)
> [ 8.255501] sd 1:0:0:0: [sda] Write Protect is off
> [ 8.255525] sd 1:0:0:0: [sda] Mode Sense: 23 00 00 00
> [ 8.256945] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> [ 8.278933] sda: sda1
> [ 8.284685] sd 1:0:0:0: [sda] Attached SCSI removable disk
> [ 16.062620] random: crng init done
> [ 83.035775] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
> [ 83.035823] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>
> Kernel log from the d-i environment:
> [ 0.000000] Booting Linux on physical CPU 0x0
> [ 0.000000] Linux version 4.9.0-3-armmp (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-1 (2017-06-04)
> [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
> [ 0.000000] CPU: div instructions available: patching division code
> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
> [ 0.000000] OF: fdt:Machine model: LeMaker Banana Pi
> [ 0.000000] efi: Getting EFI parameters from FDT:
> [ 0.000000] efi: UEFI not found.
> [ 0.000000] cma: Reserved 16 MiB at 0x7e800000
> [ 0.000000] Memory policy: Data cache writealloc
> [ 0.000000] On node 0 totalpages: 261738
> [ 0.000000] free_area_init_node: node 0, pgdat c0ce1280, node_mem_map ef6f90000
> [ 0.000000] Normal zone: 1728 pages used for memmap
> [ 0.000000] Normal zone: 0 pages reserved
> [ 0.000000] Normal zone: 196608 pages, LIFO batch:31
> [ 0.000000] HighMem zone: 65130 pages, LIFO batch:15
> [ 0.000000] psci: probing for conduit method from DT.
> [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
> [ 0.000000] percpu: Embedded 14 pages/cpu @ef6c1000 s27660 r8192 d21492 u57344
> [ 0.000000] pcpu-alloc: s27660 r8192 d21492 u57344 alloc=14*4096
> [ 0.000000] pcpu-alloc: [0] 0 [0] 1
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260010
> [ 0.000000] Kernel command line: console=ttyS0,115200
> [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> [ 0.000000] Memory: 994880K/1046952K available (7168K kernel code, 957K rwdata, 2208K rodata, 1024K init, 333K bss, 35688K reserved, 16384K cma-reserved, 244136K highmem)
> [ 0.000000] Virtual kernel memory layout:
> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
> [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
> [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
> [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
> [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
> [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
> [ 0.000000] .text : 0xc0008000 - 0xc0800000 (8160 kB)
> [ 0.000000] .init : 0xc0b00000 - 0xc0c00000 (1024 kB)
> [ 0.000000] .data : 0xc0c00000 - 0xc0cef57c ( 958 kB)
> [ 0.000000] .bss : 0xc0cf1000 - 0xc0d44604 ( 334 kB)
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] Build-time adjustment of leaf fanout to 32.
> [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
> [ 0.000000] NR_IRQS:16 nr_irqs:16 16
> [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
> [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
> [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
> [ 0.000022] Switching to timer-based delay loop, resolution 41ns
> [ 0.002768] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
> [ 0.003697] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 12741736309 ns
> [ 0.004434] Console: colour dummy device 80x30
> [ 0.004479] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000)
> [ 0.004496] pid_max: default: 32768 minimum: 301
> [ 0.004863] Security Framework initialized
> [ 0.004882] Yama: disabled by default; enable with sysctl kernel.yama.*
> [ 0.004921] AppArmor: AppArmor disabled by boot time parameter
> [ 0.005008] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
> [ 0.005022] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
> [ 0.006231] CPU: Testing write buffer coherency: ok
> [ 0.006303] ftrace: allocating 26689 entries in 79 pages
> [ 0.067686] /cpus/cpu@0 missing clock-frequency property
> [ 0.067726] /cpus/cpu@1 missing clock-frequency property
> [ 0.067741] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
> [ 0.067797] Setting up static identity map for 0x40100000 - 0x40100098
> [ 0.073462] EFI services will not be available.
> [ 0.085138] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
> [ 0.085353] Brought up 2 CPUs
> [ 0.085378] SMP: Total of 2 processors activated (96.00 BogoMIPS).
> [ 0.085386] CPU: All CPU(s) started in HYP mode.
> [ 0.085391] CPU: Virtualization extensions available.
> [ 0.086442] devtmpfs: initialized
> [ 0.098413] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
> [ 0.098930] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
> [ 0.098964] futex hash table entries: 512 (order: 3, 32768 bytes)
> [ 0.099927] pinctrl core: initialized pinctrl subsystem
> [ 0.102320] NET: Registered protocol family 16
> [ 0.104193] DMA: preallocated 256 KiB pool for atomic coherent allocations
> [ 0.106990] No ATAGs?
> [ 0.107041] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
> [ 0.107055] hw-breakpoint: maximum watchpoint size is 8 bytes.
> [ 0.108067] Serial: AMBA PL011 UART driver
> [ 0.144068] reg-fixed-voltage usb0-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb0_vbus_pin@0, deferring probe
> [ 0.144136] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
> [ 0.144175] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
> [ 0.145144] reg-fixed-voltage gmac-3v3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/gmac_power_pin@0, deferring probe
> [ 0.147926] vgaarb: loaded
> [ 0.149073] media: Linux media interface: v0.10
> [ 0.149138] Linux video capture interface: v2.00
> [ 0.149230] pps_core: LinuxPPS API ver. 1 registered
> [ 0.149239] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
> [ 0.149264] PTP clock support registered
> [ 0.151464] clocksource: Switched to clocksource arch_sys_counter
> [ 0.200321] VFS: Disk quotas dquot_6.6.0
> [ 0.200440] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [ 0.202020] simple-framebuffer 7fe79000.framebuffer: framebuffer at 0x7fe79000, 0x178e00 bytes, mapped to 0xf0900000
> [ 0.202043] simple-framebuffer 7fe79000.framebuffer: format=x8r8g8b8, mode=656x536x32, linelength=2880
> [ 0.209103] Console: switching to colour frame buffer device 82x33
> [ 0.215191] simple-framebuffer 7fe79000.framebuffer: fb0: simplefb registered!
> [ 0.229970] NET: Registered protocol family 2
> [ 0.230990] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
> [ 0.231088] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
> [ 0.231217] TCP: Hash tables configured (established 8192 bind 8192)
> [ 0.231313] UDP hash table entries: 512 (order: 2, 16384 bytes)
> [ 0.231377] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
> [ 0.231840] NET: Registered protocol family 1
> [ 0.231896] PCI: CLS 0 bytes, default 64
> [ 0.232523] Unpacking initramfs...
> [ 1.285173] Freeing initrd memory: 12824K (c937a000 - ca000000)
> [ 1.285756] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
> [ 1.288011] audit: initializing netlink subsys (disabled)
> [ 1.288123] audit: type=2000 audit(1.245:1): initialized
> [ 1.289571] workingset: timestamp_bits=14 max_order=18 bucket_order=4
> [ 1.289785] zbud: loaded
> [ 1.293432] bounce: pool size: 64 pages
> [ 1.293594] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
> [ 1.293794] io scheduler noop registered
> [ 1.293809] io scheduler deadline registered
> [ 1.293909] io scheduler cfq registered (default)
> [ 1.300337] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
> [ 1.316860] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> [ 1.319463] console [ttyS0] disabled
> [ 1.339751] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 45, base_baud = 1500000) is a U6_16550A
> [ 2.037128] console [ttyS0] enabled
> [ 2.064362] 1c28c00.serial: ttyS1 at MMIO 0x1c28c00 (irq = 46, base_baud = 1500000) is a U6_16550A
> [ 2.097016] 1c29c00.serial: ttyS2 at MMIO 0x1c29c00 (irq = 47, base_baud = 1500000) is a U6_16550A
> [ 2.106987] Serial: AMBA driver
> [ 2.113732] libphy: Fixed MDIO Bus: probed
> [ 2.118943] mousedev: PS/2 mouse device common for all mice
> [ 2.127052] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
> [ 2.133879] sunxi-rtc 1c20d00.rtc: RTC enabled
> [ 2.141064] ledtrig-cpu: registered to indicate activity on CPUs
> [ 2.148072] NET: Registered protocol family 10
> [ 2.153852] mip6: Mobile IPv6
> [ 2.156923] NET: Registered protocol family 17
> [ 2.161382] mpls_gso: MPLS GSO support
> [ 2.165222] ThumbEE CPU extension supported.
> [ 2.169526] Registering SWP/SWPB emulation handler
> [ 2.175460] registered taskstats version 1
> [ 2.179737] zswap: loaded using pool lzo/zbud
> [ 2.184335] ima: No TPM chip found, activating TPM-bypass!
> [ 2.200581] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:28:30 UTC (1710)
> [ 2.208833] sr_init: No PMIC hook to init smartreflex
> [ 2.214081] sr_init: platform driver register failed for SR
> [ 2.219951] PM: Hibernation image not present or could not be loaded.
> [ 2.220129] vcc3v0: disabling
> [ 2.223152] vcc3v3: disabling
> [ 2.226122] vcc5v0: disabling
> [ 2.229112] usb0-vbus: disabling
> [ 2.232362] usb1-vbus: disabling
> [ 2.235593] usb2-vbus: disabling
> [ 2.238835] gmac-3v3: disabling
> [ 2.243703] Freeing unused kernel memory: 1024K (c0b00000 - c0c00000)
> [ 2.315299] random: systemd-udevd: uninitialized urandom read (16 bytes read)
> [ 2.322956] random: udevadm: uninitialized urandom read (16 bytes read)
> [ 2.323472] random: systemd-udevd: uninitialized urandom read (16 bytes read)
> [ 2.323591] random: systemd-udevd: uninitialized urandom read (16 bytes read)
> [ 2.346325] random: udevadm: uninitialized urandom read (16 bytes read)
> [ 2.353700] random: udevadm: uninitialized urandom read (16 bytes read)
> [ 2.361108] random: udevadm: uninitialized urandom read (16 bytes read)
> [ 2.368381] random: udevadm: uninitialized urandom read (16 bytes read)
> [ 2.375583] random: udevadm: uninitialized urandom read (16 bytes read)
> [ 2.382852] random: udevadm: uninitialized urandom read (16 bytes read)
> [ 2.674254] sunxi-mmc 1c0f000.mmc: Got CD GPIO
> [ 2.694030] usbcore: registered new interface driver usbfs
> [ 2.699958] usbcore: registered new interface driver hub
> [ 2.703305] SCSI subsystem initialized
> [ 2.716192] usbcore: registered new device driver usb
> [ 2.724836] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 2.736947] sunxi-mmc 1c0f000.mmc: base:0xf08f4000 irq:28
> [ 2.750665] ehci-platform: EHCI generic platform driver
> [ 2.751130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 2.752551] ohci-platform: OHCI generic platform driver
> [ 2.820363] libata version 3.00 loaded.
> [ 2.839341] mmc0: host does not support reading read-only switch, assuming write-enable
> [ 2.858635] mmc0: new high speed SDHC card at address 0007
> [ 2.891747] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
> [ 2.899371] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
> [ 2.922065] mmcblk0: mmc0:0007 SD16G 14.5 GiB
> [ 2.939666] mmcblk0: p1 p2 p3 < p5 >
> [ 2.944931] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
> [ 2.954037] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc
> [ 2.978213] scsi host0: ahci-sunxi
> [ 2.983163] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 33
> [ 3.313819] ata1: SATA link down (SStatus 0 SControl 300)
> [ 6.151369] random: fast init done
> [ 17.438634] usbcore: registered new interface driver usb-storage
> [ 19.114898] loop: module loaded
> [ 20.049388] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
> [ 20.050553] EXT4-fs (mmcblk0p1): mounting ext2 file system using the ext4 subsystem
> [ 20.054937] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
> [ 20.212087] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
> [ 20.213093] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
> [ 20.225644] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
> [ 20.727824] EXT4-fs (mmcblk0p3): unable to read superblock
> [ 20.728070] EXT4-fs (mmcblk0p3): unable to read superblock
> [ 20.728202] EXT4-fs (mmcblk0p3): unable to read superblock
> [ 20.729797] isofs_fill_super: bread failed, dev=mmcblk0p3, iso_blknum=16, block=32
> [ 23.752230] EXT4-fs (mmcblk0p3): unable to read superblock
> [ 23.752476] EXT4-fs (mmcblk0p3): unable to read superblock
> [ 23.752615] EXT4-fs (mmcblk0p3): unable to read superblock
> [ 23.753935] isofs_fill_super: bread failed, dev=mmcblk0p3, iso_blknum=16, block=32
>
> Regards,
> Karsten
> --
> Gem. Par. 28 Abs. 4 Bundesdatenschutzgesetz widerspreche ich der Nutzung
> sowie der Weitergabe meiner personenbezogenen Daten für Zwecke der
> Werbung sowie der Markt- oder Meinungsforschung.
>
--
Gem. Par. 28 Abs. 4 Bundesdatenschutzgesetz widerspreche ich der Nutzung
sowie der Weitergabe meiner personenbezogenen Daten für Zwecke der
Werbung sowie der Markt- oder Meinungsforschung.
Reply to: