Bug#864200: linux-image-3.16.0-4-amd64: sound card line-in for Intel chipset has quit working
Package: src:linux
Version: 3.16.43-2
Severity: normal
Dear Maintainer,
For some time I have been watching TV (available via a Hauppauge
WinTV card) with Debian Jessie using the tvtime application without issues.
But after updating Debian Jessie this morning with
apt-get dist-upgrade
the TV sound became silent with tvtime. I then shifted to other means of watching
tv, i.e., xawtv and
vlc v4l2:///dev/video0:width=640:height=480:tuner-frequency=61250
and the sound was silent for those alternatives as well.
All my other sound tests are fine such as running aplay, watching a
dvd with vlc, and running the foobillard game. A special hardware
configuration I have used for years with that WinTV card is the sound
is connected from an audio connector on that card to the blue line-in
connector for my Intel sound chipset using an external cable. That is the only
sound hardware that I have available that uses line-in. According to
my notes it has been 7 months since I last updated my Debian Jessie
system using "apt-get dist-upgrade" so the issue may be any kernel (or
other sound-related package) update in that period.
I have done extensive experiments with alsamixer and
pavucontrol, but could find no obvious issues with line in.
I am not sure exactly which package update is to blame for sound
failing for tvtime, but since the above command did not update tvtime, and my hardware
configuration uses the Intel chipset line-in, my best guess is
it is probably the kernel package so I am reporting this sound failure
under that package. However, feel free to move this bug report to a
different package if my further tests show that different package is
the issue.
At this time I don't know what further tests of the WinTV sound (or
general sound) I can do, but I would be happy to oblige if anyone
wants me to run a further test to help figure out the source of this
problem.
Also, if anyone here is using line-in for an Intel sound chipset
(i.e., a TV card similar to my Hauppauge one where sound is connected
via an external cable to line-in) I would appreciate them trying to
verify this bug.
-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.43-2 (2017-04-30)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=c1ab2355-4ad0-4af0-b334-35ee9293c10c ro quiet
** Not tainted
** Kernel log:
[ 6.939328] bttv: Bt8xx card found (0)
[ 6.939412] bttv: 0: Bt878 (rev 17) at 0000:04:00.0, irq: 16, latency: 64, mmio: 0xfdffe000
[ 6.939424] bttv: 0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
[ 6.939426] bttv: 0: using: Hauppauge (bt878) [card=10,autodetected]
[ 6.941956] bttv: 0: Hauppauge/Voodoo msp34xx: reset line init [5]
[ 6.972730] tveeprom 7-0050: Hauppauge model 44801, rev C126, serial# 3942252
[ 6.972733] tveeprom 7-0050: tuner model is Temic 4036FY5 (idx 26, type 8)
[ 6.972736] tveeprom 7-0050: TV standards NTSC(M) (eeprom 0x08)
[ 6.972737] tveeprom 7-0050: audio processor is None (idx 0)
[ 6.972739] tveeprom 7-0050: has no radio
[ 6.972740] bttv: 0: Hauppauge eeprom indicates model#44801
[ 6.972742] bttv: 0: tuner type=8
[ 7.028145] systemd-udevd[194]: renamed network interface eth1 to eth0
[ 7.028495] coretemp coretemp.0: Using relative temperature scale!
[ 7.028507] coretemp coretemp.0: Using relative temperature scale!
[ 7.044151] systemd-udevd[205]: renamed network interface eth0 to eth1
[ 7.059353] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 7.059357] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.059360] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 7.059362] sound hdaudioC0D0: mono: mono_out=0x0
[ 7.059364] sound hdaudioC0D0: dig-out=0x1e/0x0
[ 7.059366] sound hdaudioC0D0: inputs:
[ 7.059368] sound hdaudioC0D0: Front Mic=0x19
[ 7.059371] sound hdaudioC0D0: Rear Mic=0x18
[ 7.059373] sound hdaudioC0D0: Line=0x1a
[ 7.073131] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input5
[ 7.075904] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 7.075987] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 7.076192] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 7.076269] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.076344] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.076421] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 7.076496] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 7.076569] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 7.117768] iTCO_vendor_support: vendor-support=0
[ 7.118205] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 7.118249] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
[ 7.118369] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.455848] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 7.456487] bttv: 0: audio absent, no audio device found!
[ 7.485909] tuner 7-0061: Tuner -1 found with type(s) Radio TV.
[ 7.512359] tuner-simple 7-0061: creating new instance
[ 7.512363] tuner-simple 7-0061: type set to 8 (Temic NTSC (4036 FY5))
[ 7.513649] bttv: 0: Setting PLL: 28636363 => 35468950 (needs up to 100ms)
[ 7.544026] bttv: PLL set ok
[ 7.544719] bttv: 0: registered device video0
[ 7.544778] bttv: 0: registered device vbi0
[ 7.815764] Adding 15625212k swap on /dev/sda2. Priority:-1 extents:1 across:15625212k FS
[ 8.373581] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 8.993740] systemd-journald[176]: Received request to flush runtime journal from PID 1
[ 9.440024] floppy0: no floppy controllers found
[ 10.208703] atl1 0000:01:00.0: irq 45 for MSI/MSI-X
[ 10.208765] atl1 0000:01:00.0: eth1 link is up 100 Mbps full duplex
[ 10.208813] atl1 0000:01:00.0: eth1 link is up 1000 Mbps full duplex
[ 10.726900] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.740571] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1642.583251] [drm] Setting output timings on SDVOB failed
[ 2348.420529] [drm] Setting output timings on SDVOB failed
[ 3979.530260] [drm] Setting output timings on SDVOB failed
[ 4931.290446] perf interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 5000.113769] traps: plugin-containe[2349] general protection ip:7f45dd8c92e5 sp:7ffdd292cdf8 error:0 in libglib-2.0.so.0.4200.1[7f45dd83b000+10c000]
[ 5543.025497] [drm] Setting output timings on SDVOB failed
[ 7641.715804] [drm] Setting output timings on SDVOB failed
[ 9485.093174] [drm] Setting output timings on SDVOB failed
[ 9529.244185] bttv: 0: PLL can sleep, using XTAL (28636363)
[11070.224010] bttv: 0: timeout: drop=28 irq=555286/591006, risc=2202c024, bits: VSYNC HSYNC OFLOW FDSR
[15261.017906] [drm] Setting output timings on SDVOB failed
[15394.736330] sr 5:0:0:0: [sr0]
[15394.736335] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[15394.736337] sr 5:0:0:0: [sr0]
[15394.736339] Sense Key : Illegal Request [current]
[15394.736343] sr 5:0:0:0: [sr0]
[15394.736347] Add. Sense: Read of scrambled sector without authentication
[15394.736350] sr 5:0:0:0: [sr0] CDB:
[15394.736352] Read(10): 28 00 00 00 04 00 00 00 02 00
[15394.736359] end_request: I/O error, dev sr0, sector 4096
[15394.736362] Buffer I/O error on device sr0, logical block 512
[15394.796311] sr 5:0:0:0: [sr0]
[15394.796314] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[15394.796317] sr 5:0:0:0: [sr0]
[15394.796318] Sense Key : Illegal Request [current]
[15394.796322] sr 5:0:0:0: [sr0]
[15394.796325] Add. Sense: Read of scrambled sector without authentication
[15394.796327] sr 5:0:0:0: [sr0] CDB:
[15394.796329] Read(10): 28 00 00 00 04 00 00 00 02 00
[15394.796336] end_request: I/O error, dev sr0, sector 4096
[15394.796339] Buffer I/O error on device sr0, logical block 512
[15982.617084] [drm] Setting output timings on SDVOB failed
[16148.550407] [drm] Setting output timings on SDVOB failed
[17509.307812] [drm] Setting output timings on SDVOB failed
[18220.646716] [drm] Setting output timings on SDVOB failed
[18408.008165] bttv: 0: reset, reinitialize
[18408.008202] bttv: 0: PLL can sleep, using XTAL (28636363)
[20350.727975] [drm] Setting output timings on SDVOB failed
[20463.049948] [drm] Setting output timings on SDVOB failed
[21361.529677] [drm] Setting output timings on SDVOB failed
[22519.831758] [drm] Setting output timings on SDVOB failed
[31676.525086] [drm] Setting output timings on SDVOB failed
[32342.211329] [drm] Setting output timings on SDVOB failed
[33786.861216] [drm] Setting output timings on SDVOB failed
** Model information
sys_vendor: System manufacturer
product_name: P5K-V
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 0402
board_vendor: ASUSTeK Computer INC.
board_name: P5K-V
board_version: Rev 1.xx
** Loaded modules:
xt_conntrack
iptable_filter
ipt_MASQUERADE
iptable_nat
nf_conntrack_ipv4
nf_defrag_ipv4
nf_nat_ipv4
nf_nat
nf_conntrack
ip_tables
x_tables
tuner_simple
tuner_types
tuner
tda7432
tvaudio
iTCO_wdt
iTCO_vendor_support
snd_hda_codec_realtek
snd_hda_codec_generic
coretemp
msp3400
bttv
btcx_risc
tveeprom
videobuf_dma_sg
videobuf_core
kvm_intel
snd_bt87x
kvm
rc_core
v4l2_common
lpc_ich
videodev
media
mfd_core
evdev
pcspkr
serio_raw
snd_hda_intel
snd_hda_controller
snd_hda_codec
asus_atk0110
snd_hwdep
snd_pcm
snd_timer
snd
soundcore
i915
shpchp
video
drm_kms_helper
drm
i2c_algo_bit
button
acpi_cpufreq
processor
thermal_sys
fuse
autofs4
ext4
crc16
mbcache
jbd2
hid_generic
usbhid
hid
sg
sd_mod
crc_t10dif
crct10dif_generic
sr_mod
cdrom
crct10dif_common
ata_generic
i2c_i801
i2c_core
ata_piix
firewire_ohci
firewire_core
crc_itu_t
via_rhine
atl1
mii
pata_jmicron
ahci
libahci
libata
scsi_mod
ehci_pci
uhci_hcd
ehci_hcd
usbcore
usb_common
** Network interface configuration:
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
auto eth1
iface eth1 inet static
address 192.168.1.1
netmask 255.255.255.0
network 192.168.1.0
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 00:1b:fc:90:e0:66 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.1/24 brd 192.168.1.255 scope global eth1
valid_lft forever preferred_lft forever
inet6 fe80::21b:fcff:fe90:e066/64 scope link
valid_lft forever preferred_lft forever
3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 1000
link/ether 00:50:ba:c2:b4:09 brd ff:ff:ff:ff:ff:ff
inet 24.68.104.31/22 brd 255.255.255.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::250:baff:fec2:b409/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 5874441158 557198 0 0 0 0 0 0 5874441158 557198 0 0 0 0 0 0
eth1: 972475182 10772089 0 0 0 0 0 0 183052963293 121873765 0 0 0 0 2 0
eth0: 1079825435 824237 0 0 0 0 0 0 34129849 390229 9 0 9 0 0 0
*** Protocol statistics:
Ip:
11905116 total packets received
0 forwarded
0 incoming packets discarded
11903350 incoming packets delivered
4748229 requests sent out
Icmp:
5 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 5
5 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 5
IcmpMsg:
InType3: 5
OutType3: 5
Tcp:
3272 active connections openings
52 passive connection openings
108 failed connection attempts
231 connection resets received
36 connections established
12062305 segments received
122817640 segments send out
310 segments retransmited
43 bad segments received.
1226 resets sent
Udp:
6098 packets received
5 packets to unknown port received.
0 packet receive errors
6107 packets sent
UdpLite:
TcpExt:
1952 TCP sockets finished time wait in fast timer
28315 delayed acks sent
114 delayed acks further delayed because of locked socket
Quick ack mode was activated 1198 times
1777 packets directly queued to recvmsg prequeue.
2023 bytes directly in process context from backlog
2201134 bytes directly received in process context from prequeue
1765461 packet headers predicted
1551 packets header predicted and directly queued to user
875837 acknowledgments not containing data payload received
9423987 predicted acknowledgments
30 times recovered from packet loss by selective acknowledgements
29 congestion windows fully recovered without slow start
30 fast retransmits
3 other TCP timeouts
TCPLossProbes: 598
TCPLossProbeRecovery: 205
1198 DSACKs sent for old packets
290 DSACKs received
29 connections reset due to unexpected data
168 connections reset due to early user close
2 connections aborted due to timeout
TCPDSACKIgnoredNoUndo: 204
TCPSackShiftFallback: 853
TCPRcvCoalesce: 426362
TCPOFOQueue: 54911
TCPChallengeACK: 44
TCPSYNChallenge: 43
TCPSpuriousRtxHostQueues: 72
TCPAutoCorking: 467786
TCPFromZeroWindowAdv: 3
TCPToZeroWindowAdv: 3
TCPWantZeroWindowAdv: 2021
TCPSynRetrans: 10
TCPOrigDataSent: 121872390
IpExt:
InNoRoutes: 2
InMcastPkts: 663
InBcastPkts: 166
InOctets: 4833602071
OutOctets: 178195954446
InMcastOctets: 18564
InBcastOctets: 55645
InNoECTPkts: 11905112
InCEPkts: 4
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8276]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2] (rev 02) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at fe800000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at cc00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at fe700000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c3] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fe880000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at c480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at c800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at c880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe6fbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:829f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fe6f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f0000000-f03fffff
Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: 00000000f0600000-00000000f07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at c000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at c080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at c400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe6fb800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 IDE interface [0101]: Intel Corporation 82801IB (ICH9) 2 port SATA Controller [IDE mode] [8086:2921] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 0: I/O ports at ac00 [size=8]
Region 1: I/O ports at a880 [size=4]
Region 2: I/O ports at a800 [size=8]
Region 3: I/O ports at a480 [size=4]
Region 4: I/O ports at a400 [size=16]
Region 5: I/O ports at a080 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe6fb400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 0: I/O ports at bc00 [size=8]
Region 1: I/O ports at b880 [size=4]
Region 2: I/O ports at b800 [size=8]
Region 3: I/O ports at b480 [size=4]
Region 4: I/O ports at b400 [size=16]
Region 5: I/O ports at b080 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 Ethernet controller [0200]: Qualcomm Atheros Attansic L1 Gigabit Ethernet [1969:1048] (rev b0)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8226]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fe9c0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at fe9a0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: atl1
02:00.0 SATA controller [0106]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 5: Memory at feafe000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at feae0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
02:00.1 IDE interface [0101]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
04:00.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 11)
Subsystem: Hauppauge computer works Inc. WinTV Series [0070:13eb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fdffe000 (32-bit, prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: bttv
04:00.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 11)
Subsystem: Hauppauge computer works Inc. WinTV Series [0070:13eb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fdfff000 (32-bit, prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: snd_bt87x
04:02.0 Ethernet controller [0200]: VIA Technologies, Inc. VT86C100A [Rhine] [1106:3043] (rev 06)
Subsystem: D-Link System Inc DFE-530TX rev A [1186:1400]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (29500ns min, 38000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at ec00 [size=128]
Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=128]
Expansion ROM at febe0000 [disabled] [size=64K]
Kernel driver in use: via-rhine
04:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Motherboard [1043:81fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at e880 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 045e:00cb Microsoft Corp. Basic Optical Mouse v2.0
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 8.8
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.120+deb8u3
ii kmod 18-3
ii linux-base 3.5
Versions of packages linux-image-3.16.0-4-amd64 recommends:
pn firmware-linux-free <none>
pn irqbalance <none>
Versions of packages linux-image-3.16.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-22+deb8u1
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false
linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true
linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64:
Reply to: