Bug#858125: e1000: ethernet interface hangs occasionally, kernel reports hang
Here is a more complete dmesg output with a few resets included at the
bottom. You can see there is 14 minutes between the resets:
[Mar18 12:26] ------------[ cut here ]------------
[ +0.000019] WARNING: CPU: 0 PID: 0 at /build/linux-GU1w8g/linux-3.16.39/net/sched/sch_generic.c:264 dev_watchdog+0x236/0x240()
[ +0.000004] NETDEV WATCHDOG: eth0 (e1000e): transmit queue 0 timed out
[ +0.000002] Modules linked in: binfmt_misc cpufreq_stats cpufreq_conservative cpufreq_powersave cpufreq_userspace cfg80211 rfkill nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc pl2303 usbserial intel_powerclamp coretemp kvm_intel serio_raw kvm nvidia(PO) drm snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support snd_hda_intel evdev pcspkr lpc_ich snd_hda_controller snd_hda_codec mfd_core i2c_i801 i2c_core snd_hwdep snd_pcm snd_timer ioatdma snd soundcore button i7core_edac shpchp acpi_cpufreq edac_core dca processor thermal_sys loop firewire_sbp2 fuse parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 hid_generic usbhid hid usb_storage sd_mod crc_t10dif sg crct10dif_generic sr_mod crct10dif_common cdrom ata_generic crc32c_intel ata_piix psmouse uhci_hcd
[ +0.000075] ehci_pci libata e1000e ehci_hcd firewire_ohci usbcore ptp firewire_core scsi_mod crc_itu_t pps_core usb_common
[ +0.000013] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P O 3.16.0-4-amd64 #1 Debian 3.16.39-1
[ +0.000009] Hardware name: Supermicro X8DA3/X8DA3, BIOS 2.1a 04/06/2012
[ +0.000005] 0000000000000000 ffffffff81514c11 ffff88033fc03e28 0000000000000009
[ +0.000003] ffffffff81068867 0000000000000000 ffff88033fc03e78 0000000000000001
[ +0.000009] 0000000000000000 ffff880630420000 ffffffff810688cc ffffffff81777e40
[ +0.000004] Call Trace:
[ +0.000002] <IRQ> [<ffffffff81514c11>] ? dump_stack+0x5d/0x78
[ +0.000014] [<ffffffff81068867>] ? warn_slowpath_common+0x77/0x90
[ +0.000003] [<ffffffff810688cc>] ? warn_slowpath_fmt+0x4c/0x50
[ +0.000007] [<ffffffff81446e66>] ? dev_watchdog+0x236/0x240
[ +0.000004] [<ffffffff81446c30>] ? dev_graft_qdisc+0x70/0x70
[ +0.000005] [<ffffffff81073ea1>] ? call_timer_fn+0x31/0x140
[ +0.000003] [<ffffffff81446c30>] ? dev_graft_qdisc+0x70/0x70
[ +0.000004] [<ffffffff81075559>] ? run_timer_softirq+0x1e9/0x2f0
[ +0.000005] [<ffffffff8106d911>] ? __do_softirq+0xf1/0x2d0
[ +0.000003] [<ffffffff8106dd25>] ? irq_exit+0x95/0xa0
[ +0.000005] [<ffffffff8151dcb0>] ? smp_apic_timer_interrupt+0x40/0x50
[ +0.000004] [<ffffffff8151bd3d>] ? apic_timer_interrupt+0x6d/0x80
[ +0.000001] <EOI> [<ffffffff8108c31d>] ? __hrtimer_start_range_ns+0x1cd/0x3a0
[ +0.000008] [<ffffffff813e329f>] ? cpuidle_enter_state+0x4f/0xc0
[ +0.000003] [<ffffffff813e3298>] ? cpuidle_enter_state+0x48/0xc0
[ +0.000005] [<ffffffff810a9b28>] ? cpu_startup_entry+0x328/0x470
[ +0.000008] [<ffffffff81903076>] ? start_kernel+0x497/0x4a2
[ +0.000003] [<ffffffff81902a04>] ? set_init_arg+0x4e/0x4e
[ +0.000003] [<ffffffff81902120>] ? early_idt_handler_array+0x120/0x120
[ +0.000003] [<ffffffff8190271f>] ? x86_64_start_kernel+0x14d/0x15c
[ +0.000005] ---[ end trace 09366cbabe9552a8 ]---
--> [ +0.000018] e1000e 0000:03:00.0 eth0: Reset adapter unexpectedly
--> [ +3.963164] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
--> [Mar18 12:40] e1000e 0000:03:00.0 eth0: Reset adapter unexpectedly
--> [ +3.891401] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
--
Bruce Momjian <bruce@momjian.us> http://momjian.us
EnterpriseDB http://enterprisedb.com
+ As you are, so once was I. As I am, so you will be. +
+ Ancient Roman grave inscription +
Reply to: