[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#858078: Kernel hangs most of the times when modeset=1 on the i915



Package: src:linux
Version: 4.9.13-1
Severity: critical

I just upgraded this machine from Jessie to Stretch and found the kernel
crashing (computer completelly frozen) most of the times, even if X is not
started. I then tried to use the kernel from Jessie with current packages
from Stretch and found that it works perfectly, like it used to on Jessie.

One of the things I tried was to pass modeset=0 parameter to the i915
module and it fixed things, so it seems that the problem is with modesetting
on the i915 module.

I have gotten the messages from the kernel when it boots ok, I'll try to
attach them to the bugreport:

4.9 messages when it boots ok and X finally starts
4.9noX messages when it boots but without starting X
4.9nomodeset messages when modeset is disabled and no X is started, never hangs

If you need any other info just let me know.

Regards.

-- Package-specific info:
** Version:
Linux version 4.9.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170221 (Debian 6.3.0-8) ) #1 SMP Debian 4.9.13-1 (2017-02-27)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.9.0-2-amd64 root=UUID=d5d46d07-3c4f-4549-99cd-af7d4b539315 ro quiet

** Tainted: W (512)
 * Taint on warning.

** Kernel log:
Unable to read kernel log; any relevant messages should be attached

** Model information
sys_vendor: Hewlett-Packard
product_name: Compaq Presario C700 Notebook PC
product_version: F.34
chassis_vendor: Hewlett-Packard
chassis_version: N/A
bios_vendor: Hewlett-Packard
bios_version: F.34
board_vendor: Hewlett-Packard
board_name: 30D9
board_version: 83.21

** Loaded modules:
ctr
ccm
appletalk
ax25
ipx
p8023
p8022
psnap
llc
snd_hrtimer
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
snd_seq
snd_seq_device
arc4
ath5k
iTCO_wdt
uvcvideo
iTCO_vendor_support
i915
ath
mac80211
hp_wmi
videobuf2_vmalloc
videobuf2_memops
sparse_keymap
videobuf2_v4l2
joydev
evdev
coretemp
videobuf2_core
cfg80211
serio_raw
videodev
sg
media
rfkill
snd_hda_codec_conexant
pcspkr
snd_hda_codec_generic
snd_hda_intel
lpc_ich
snd_hda_codec
mfd_core
snd_hda_core
wmi
snd_hwdep
snd_pcm_oss
drm_kms_helper
drm
shpchp
battery
snd_mixer_oss
snd_pcm
video
snd_timer
snd
soundcore
i2c_algo_bit
ac
button
acpi_cpufreq
tpm_tis
tpm_tis_core
tpm
binfmt_misc
ip_tables
x_tables
autofs4
ext4
crc16
jbd2
crc32c_generic
fscrypto
ecb
glue_helper
lrw
gf128mul
ablk_helper
cryptd
aes_x86_64
mbcache
sr_mod
cdrom
sd_mod
ata_generic
ata_piix
ahci
libahci
libata
uhci_hcd
ehci_pci
scsi_mod
psmouse
8139too
ehci_hcd
i2c_i801
i2c_smbus
8139cp
mii
usbcore
usb_common
thermal
fjes

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03)
	Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 03) (prog-if 00 [VGA controller])
	Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 27
	Region 0: Memory at 91000000 (64-bit, non-prefetchable) [size=1M]
	Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at 30d0 [size=8]
	[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: i915
	Kernel modules: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 03)
	Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at 91100000 (64-bit, non-prefetchable) [size=1M]
	Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
	Subsystem: Conexant Systems, Inc. Presario C700 [14f1:5051]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 26
	Region 0: Memory at 92400000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 24
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: 91300000-923fffff
	Prefetchable memory behind bridge: 0000000090000000-0000000090ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 21
	Region 4: I/O ports at 3080 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 20
	Region 4: I/O ports at 3060 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 19
	Region 4: I/O ports at 3040 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at 92404800 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: 91200000-912fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
	Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich

00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master SecP PriP])
	Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374
	Region 4: I/O ports at 30a0 [size=16]
	Kernel driver in use: ata_piix
	Kernel modules: ata_piix, ata_generic

00:1f.2 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 03) (prog-if 01 [AHCI 1.0])
	Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 25
	Region 0: I/O ports at 30b8 [size=8]
	Region 1: I/O ports at 30dc [size=4]
	Region 2: I/O ports at 30b0 [size=8]
	Region 3: I/O ports at 30d8 [size=4]
	Region 4: I/O ports at 3020 [size=32]
	Region 5: Memory at 92404000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
	Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin D routed to IRQ 19
	Region 0: Memory at 92404c00 (32-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 3000 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801

01:00.0 Ethernet controller [0200]: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01)
	Subsystem: Hewlett-Packard Company AR242x / AR542x Wireless Network Adapter (PCI-Express) [103c:137b]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at 91300000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: ath5k
	Kernel modules: ath5k

02:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter [10ec:8139] (rev 10)
	Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (8000ns min, 16000ns max)
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at 1000 [size=256]
	Region 1: Memory at 91200000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: 8139too
	Kernel modules: 8139cp, 8139too


** USB devices:
Bus 001 Device 002: ID 04f2:b057 Chicony Electronics Co., Ltd integrated USB webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: 9.0
  APT prefers testing
  APT policy: (500, 'testing'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 4.9.0-2-amd64 (SMP w/1 CPU core)
Locale: LANG=gl_ES.UTF-8, LC_CTYPE=gl_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.9.0-2-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.127
ii  kmod                                    23-2
ii  linux-base                              4.5

Versions of packages linux-image-4.9.0-2-amd64 recommends:
pn  firmware-linux-free  <none>
pn  irqbalance           <none>

Versions of packages linux-image-4.9.0-2-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.02~beta3-5
pn  linux-doc-4.9           <none>

Versions of packages linux-image-4.9.0-2-amd64 is related to:
pn  firmware-amd-graphics     <none>
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
pn  firmware-misc-nonfree     <none>
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information
[    0.000000] Linux version 4.9.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170221 (Debian 6.3.0-8) ) #1 SMP Debian 4.9.13-1 (2017-02-27)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-2-amd64 root=UUID=d5d46d07-3c4f-4549-99cd-af7d4b539315 ro quiet
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f4d1fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f4d2000-0x000000007f4dcfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f4dd000-0x000000007f533fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f534000-0x000000007f536fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f537000-0x000000007f5bafff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f5bb000-0x000000007f5befff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f5bf000-0x000000007f679fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f67a000-0x000000007f6befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f6bf000-0x000000007f6fffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f700000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Hewlett-Packard Compaq Presario C700 Notebook PC/30D9, BIOS F.34 09/25/2008
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f67a max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFFE0000 mask FFFFE0000 write-protect
[    0.000000]   1 base 000000000 mask FC0000000 write-back
[    0.000000]   2 base 040000000 mask FC0000000 write-back
[    0.000000]   3 base 07F800000 mask FFF800000 uncachable
[    0.000000]   4 base 07F700000 mask FFFF00000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000fe270-0x000fe27f] mapped at [ffff9cd7400fe270]
[    0.000000] Base memory trampoline at [ffff9cd740099000] 99000 size 24576
[    0.000000] BRK [0x6f32b000, 0x6f32bfff] PGTABLE
[    0.000000] BRK [0x6f32c000, 0x6f32cfff] PGTABLE
[    0.000000] BRK [0x6f32d000, 0x6f32dfff] PGTABLE
[    0.000000] BRK [0x6f32e000, 0x6f32efff] PGTABLE
[    0.000000] BRK [0x6f32f000, 0x6f32ffff] PGTABLE
[    0.000000] BRK [0x6f330000, 0x6f330fff] PGTABLE
[    0.000000] BRK [0x6f331000, 0x6f331fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35cdb000-0x36e64fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HP    )
[    0.000000] ACPI: XSDT 0x000000007F6FE120 00006C (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 0x000000007F6FD000 0000F4 (v04 HP     SPARTAN  00000001 LOHR 00000000)
[    0.000000] ACPI: DSDT 0x000000007F6F4000 00802F (v01 HP     SPARTAN  00000001 LOHR 00000000)
[    0.000000] ACPI: FACS 0x000000007F67D000 000040
[    0.000000] ACPI: FACS 0x000000007F67D000 000040
[    0.000000] ACPI: APIC 0x000000007F6F3000 000068 (v02 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[    0.000000] ACPI: HPET 0x000000007F6F2000 000038 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[    0.000000] ACPI: MCFG 0x000000007F6F1000 00003C (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[    0.000000] ACPI: ASF! 0x000000007F6F0000 0000A5 (v32 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[    0.000000] ACPI: SLIC 0x000000007F6EF000 000176 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[    0.000000] ACPI: BOOT 0x000000007F6EE000 000028 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[    0.000000] ACPI: SSDT 0x000000007F6ED000 0005D7 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.000000] ACPI: SSDT 0x000000007F6EC000 0004C4 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007f679fff]
[    0.000000] NODE_DATA(0) allocated [mem 0x7f675000-0x7f679fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007f679fff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007f4d1fff]
[    0.000000]   node   0: [mem 0x000000007f4dd000-0x000000007f533fff]
[    0.000000]   node   0: [mem 0x000000007f537000-0x000000007f5bafff]
[    0.000000]   node   0: [mem 0x000000007f5bf000-0x000000007f679fff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f679fff]
[    0.000000] On node 0 totalpages: 521734
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8090 pages used for memmap
[    0.000000]   DMA32 zone: 517736 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000007f800000-0x000000007fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f4d2000-0x7f4dcfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f534000-0x7f536fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f5bb000-0x7f5befff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff9cd7bf200000 s103384 r8192 d31784 u1048576
[    0.000000] pcpu-alloc: s103384 r8192 d31784 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 513559
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-2-amd64 root=UUID=d5d46d07-3c4f-4549-99cd-af7d4b539315 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2020184K/2086936K available (6142K kernel code, 1129K rwdata, 2844K rodata, 1392K init, 684K bss, 66752K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:33024 nr_irqs:440 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1861.969 MHz processor
[    0.004014] Calibrating delay loop (skipped), value calculated using timer frequency.. 3723.93 BogoMIPS (lpj=7447876)
[    0.004018] pid_max: default: 32768 minimum: 301
[    0.004047] ACPI: Core revision 20160831
[    0.013419] ACPI: 3 ACPI AML tables successfully acquired and loaded
[    0.013508] Security Framework initialized
[    0.013511] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.013520] AppArmor: AppArmor disabled by boot time parameter
[    0.013736] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.015080] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.015804] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.015810] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.016391] mce: CPU supports 6 MCE banks
[    0.016403] CPU0: Thermal monitoring enabled (TM1)
[    0.016409] process: using mwait in idle threads
[    0.016416] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.016417] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.028012] ftrace: allocating 24999 entries in 98 pages
[    0.040218] smpboot: Max logical packages: 2
[    0.040700] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.084000] smpboot: CPU0: Intel(R) Celeron(R) CPU          540  @ 1.86GHz (family: 0x6, model: 0x16, stepping: 0x1)
[    0.084000] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[    0.084000] ... version:                2
[    0.084000] ... bit width:              40
[    0.084000] ... generic registers:      2
[    0.084000] ... value mask:             000000ffffffffff
[    0.084000] ... max period:             000000007fffffff
[    0.084000] ... fixed-purpose events:   3
[    0.084000] ... event mask:             0000000700000003
[    0.084000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.084000] x86: Booted up 1 node, 1 CPUs
[    0.084000] smpboot: Total of 1 processors activated (3723.93 BogoMIPS)
[    0.084000] devtmpfs: initialized
[    0.084000] x86/mm: Memory block size: 128MB
[    0.085999] PM: Registering ACPI NVS region [mem 0x7f67a000-0x7f6befff] (282624 bytes)
[    0.086074] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.086085] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.086137] pinctrl core: initialized pinctrl subsystem
[    0.086312] NET: Registered protocol family 16
[    0.086593] cpuidle: using governor ladder
[    0.086594] cpuidle: using governor menu
[    0.086620] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    0.086621] Simple Boot Flag at 0x44 set to 0x1
[    0.086634] ACPI: bus type PCI registered
[    0.086636] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.086736] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.086739] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.086753] PCI: Using configuration type 1 for base access
[    0.088041] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.088368] ACPI: Added _OSI(Module Device)
[    0.088369] ACPI: Added _OSI(Processor Device)
[    0.088371] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.088372] ACPI: Added _OSI(Processor Aggregator Device)
[    0.088624] ACPI: Executed 1 blocks of module-level executable AML code
[    0.090486] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.092624] ACPI : EC: EC started
[    0.228036] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as first EC
[    0.228039] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.228041] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as boot DSDT EC to handle transactions
[    0.228042] ACPI: Interpreter enabled
[    0.228068] ACPI: (supports S0 S3 S4 S5)
[    0.228070] ACPI: Using IOAPIC for interrupt routing
[    0.228106] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.407467] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.496542] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.496549] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.496555] ACPI BIOS Error (bug): \_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20160831/nsarguments-189)
[    0.496783] acpi PNP0A08:00: _OSC failed (AE_TYPE); disabling ASPM
[    0.497352] PCI host bridge to bus 0000:00
[    0.497355] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.497357] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.497359] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.497361] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.497364] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.497375] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[    0.497518] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
[    0.497533] pci 0000:00:02.0: reg 0x10: [mem 0x91000000-0x910fffff 64bit]
[    0.497543] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.497549] pci 0000:00:02.0: reg 0x20: [io  0x30d0-0x30d7]
[    0.497679] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
[    0.497692] pci 0000:00:02.1: reg 0x10: [mem 0x91100000-0x911fffff 64bit]
[    0.497878] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[    0.497905] pci 0000:00:1b.0: reg 0x10: [mem 0x92400000-0x92403fff 64bit]
[    0.498026] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.498148] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[    0.498270] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.498336] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.498407] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[    0.498468] pci 0000:00:1d.0: reg 0x20: [io  0x3080-0x309f]
[    0.498603] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[    0.498664] pci 0000:00:1d.1: reg 0x20: [io  0x3060-0x307f]
[    0.498794] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[    0.498855] pci 0000:00:1d.2: reg 0x20: [io  0x3040-0x305f]
[    0.498998] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[    0.499021] pci 0000:00:1d.7: reg 0x10: [mem 0x92404800-0x92404bff]
[    0.499135] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.499249] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.499378] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.499443] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[    0.499565] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[    0.499571] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
[    0.499578] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003)
[    0.499716] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[    0.499734] pci 0000:00:1f.1: reg 0x10: [io  0x30c8-0x30cf]
[    0.499747] pci 0000:00:1f.1: reg 0x14: [io  0x30e4-0x30e7]
[    0.499759] pci 0000:00:1f.1: reg 0x18: [io  0x30c0-0x30c7]
[    0.499771] pci 0000:00:1f.1: reg 0x1c: [io  0x30e0-0x30e3]
[    0.499784] pci 0000:00:1f.1: reg 0x20: [io  0x30a0-0x30af]
[    0.499812] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.499814] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.499816] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.499817] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.499928] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[    0.499952] pci 0000:00:1f.2: reg 0x10: [io  0x30b8-0x30bf]
[    0.499965] pci 0000:00:1f.2: reg 0x14: [io  0x30dc-0x30df]
[    0.499977] pci 0000:00:1f.2: reg 0x18: [io  0x30b0-0x30b7]
[    0.499990] pci 0000:00:1f.2: reg 0x1c: [io  0x30d8-0x30db]
[    0.500008] pci 0000:00:1f.2: reg 0x20: [io  0x3020-0x303f]
[    0.500021] pci 0000:00:1f.2: reg 0x24: [mem 0x92404000-0x924047ff]
[    0.500089] pci 0000:00:1f.2: PME# supported from D3hot
[    0.500200] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[    0.500219] pci 0000:00:1f.3: reg 0x10: [mem 0x92404c00-0x92404cff]
[    0.500263] pci 0000:00:1f.3: reg 0x20: [io  0x3000-0x301f]
[    0.500489] pci 0000:01:00.0: [168c:001c] type 00 class 0x020000
[    0.500527] pci 0000:01:00.0: reg 0x10: [mem 0x91300000-0x9130ffff 64bit]
[    0.500800] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.500814] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.500819] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.500824] pci 0000:00:1c.0:   bridge window [mem 0x91300000-0x923fffff]
[    0.500832] pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[    0.500901] pci 0000:02:01.0: [10ec:8139] type 00 class 0x020000
[    0.500926] pci 0000:02:01.0: reg 0x10: [io  0x1000-0x10ff]
[    0.500941] pci 0000:02:01.0: reg 0x14: [mem 0x91200000-0x912000ff]
[    0.501054] pci 0000:02:01.0: supports D1 D2
[    0.501056] pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
[    0.501176] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[    0.501181] pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
[    0.501186] pci 0000:00:1e.0:   bridge window [mem 0x91200000-0x912fffff]
[    0.501194] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.501196] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.501199] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.501201] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[    0.501314] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.501408] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[    0.501498] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.501589] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.501678] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[    0.501768] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[    0.501857] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[    0.501946] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[    0.502573] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.502734] ACPI : EC: event unblocked
[    0.502744] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.502746] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.502928] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.502930] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.502934] vgaarb: loaded
[    0.502935] vgaarb: bridge control possible 0000:00:02.0
[    0.503081] PCI: Using ACPI for IRQ routing
[    0.514999] PCI: pci_cache_line_size set to 64 bytes
[    0.515065] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.515067] e820: reserve RAM buffer [mem 0x7f4d2000-0x7fffffff]
[    0.515068] e820: reserve RAM buffer [mem 0x7f534000-0x7fffffff]
[    0.515070] e820: reserve RAM buffer [mem 0x7f5bb000-0x7fffffff]
[    0.515071] e820: reserve RAM buffer [mem 0x7f67a000-0x7fffffff]
[    0.515305] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.515311] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.515315] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.517038] clocksource: Switched to clocksource hpet
[    0.527476] VFS: Disk quotas dquot_6.6.0
[    0.527521] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.527681] pnp: PnP ACPI init
[    0.596267] pnp 00:00: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1e.0 BAR 13 [io  0x1000-0x1fff]
[    0.596343] system 00:00: [io  0x0600-0x060f] has been reserved
[    0.596345] system 00:00: [io  0x0610] has been reserved
[    0.596347] system 00:00: [io  0x0800-0x080f] has been reserved
[    0.596349] system 00:00: [io  0x0810-0x0817] has been reserved
[    0.596352] system 00:00: [io  0x0400-0x047f] has been reserved
[    0.596354] system 00:00: [io  0x0500-0x053f] has been reserved
[    0.596356] system 00:00: [io  0xff2c-0xff2f] has been reserved
[    0.596359] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.596361] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.596364] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.596366] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.596368] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.596370] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.596372] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.596378] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.596442] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.596536] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.596588] pnp 00:03: Plug and Play ACPI device, IDs AUI0214 PNP0f13 (active)
[    0.596679] pnp: PnP ACPI: found 4 devices
[    0.603620] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.603664] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.603668] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.603675] pci 0000:00:1c.0:   bridge window [mem 0x91300000-0x923fffff]
[    0.603679] pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[    0.603688] pci 0000:00:1e.0: PCI bridge to [bus 02]
[    0.603691] pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
[    0.603698] pci 0000:00:1e.0:   bridge window [mem 0x91200000-0x912fffff]
[    0.603710] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.603712] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.603714] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.603716] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[    0.603718] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.603720] pci_bus 0000:01: resource 1 [mem 0x91300000-0x923fffff]
[    0.603722] pci_bus 0000:01: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
[    0.603724] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    0.603726] pci_bus 0000:02: resource 1 [mem 0x91200000-0x912fffff]
[    0.603727] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7 window]
[    0.603729] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff window]
[    0.603731] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.603733] pci_bus 0000:02: resource 7 [mem 0x80000000-0xfebfffff window]
[    0.603861] NET: Registered protocol family 2
[    0.604135] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.604220] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.604346] TCP: Hash tables configured (established 16384 bind 16384)
[    0.604422] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.604440] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.604535] NET: Registered protocol family 1
[    0.604563] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.606108] PCI: CLS 0 bytes, default 64
[    0.606206] Unpacking initramfs...
[    1.077078] Freeing initrd memory: 17960K (ffff9cd775cdb000 - ffff9cd776e65000)
[    1.077755] audit: initializing netlink subsys (disabled)
[    1.077794] audit: type=2000 audit(1489789011.076:1): initialized
[    1.078228] Initialise system trusted keyrings
[    1.078372] workingset: timestamp_bits=40 max_order=19 bucket_order=0
[    1.078394] zbud: loaded
[    1.153362] Key type asymmetric registered
[    1.153364] Asymmetric key parser 'x509' registered
[    1.153398] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.153441] io scheduler noop registered
[    1.153442] io scheduler deadline registered
[    1.153457] io scheduler cfq registered (default)
[    1.153948] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.153957] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.153982] intel_idle: does not run on family 6 model 22
[    1.154137] Monitor-Mwait will be used to enter C-1 state
[    1.154145] Monitor-Mwait will be used to enter C-2 state
[    1.154149] Monitor-Mwait will be used to enter C-3 state
[    1.154153] tsc: Marking TSC unstable due to TSC halts in idle
[    1.154299] GHES: HEST is not enabled!
[    1.154390] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.154949] Linux agpgart interface v0.103
[    1.155028] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.155029] AMD IOMMUv2 functionality not available on this system
[    1.155180] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    1.190291] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.190314] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.190512] mousedev: PS/2 mouse device common for all mice
[    1.192162] rtc_cmos 00:01: RTC can wake from S4
[    1.192338] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.192373] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.192394] ledtrig-cpu: registered to indicate activity on CPUs
[    1.192756] NET: Registered protocol family 10
[    1.193075] mip6: Mobile IPv6
[    1.193078] NET: Registered protocol family 17
[    1.193081] mpls_gso: MPLS GSO support
[    1.193271] microcode: sig=0x10661, pf=0x80, revision=0x16
[    1.193315] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.193477] registered taskstats version 1
[    1.193480] Loading compiled-in X.509 certificates
[    1.195493] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    1.195942] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    1.195974] zswap: loaded using pool lzo/zbud
[    1.196416] rtc_cmos 00:01: setting system clock to 2017-03-17 22:16:51 UTC (1489789011)
[    1.196504] PM: Hibernation image not present or could not be loaded.
[    1.198565] Freeing unused kernel memory: 1392K (ffffffff99b1c000 - ffffffff99c78000)
[    1.198569] Write protecting the kernel read-only data: 12288k
[    1.200338] Freeing unused kernel memory: 2032K (ffff9cd7aea04000 - ffff9cd7aec00000)
[    1.204988] Freeing unused kernel memory: 1252K (ffff9cd7aeec7000 - ffff9cd7af000000)
[    1.212970] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.223192] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.244595] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.244711] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.244725] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.246412] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.246468] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.248092] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.248122] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.248220] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.248244] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.248731] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.302327] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    1.326320] ACPI: bus type USB registered
[    1.326361] usbcore: registered new interface driver usbfs
[    1.326376] usbcore: registered new interface driver hub
[    1.342403] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.342408] 8139cp 0000:02:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    1.347178] usbcore: registered new device driver usb
[    1.354835] 8139too: 8139too Fast Ethernet driver 0.9.28
[    1.355610] 8139too 0000:02:01.0 eth0: RealTek RTL8139 at 0xffffa8cf4033d000, 00:1b:38:f5:af:69, IRQ 16
[    1.359284] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.364720] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.370285] ehci-pci: EHCI PCI platform driver
[    1.375755] thermal LNXTHERM:00: registered as thermal_zone0
[    1.375758] ACPI: Thermal Zone [TZ01] (55 C)
[    1.378543] uhci_hcd: USB Universal Host Controller Interface driver
[    1.385811] SCSI subsystem initialized
[    1.400533] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.400543] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.400562] ehci-pci 0000:00:1d.7: debug port 1
[    1.404468] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.417078] ehci-pci 0000:00:1d.7: irq 23, io mem 0x92404800
[    1.424595] libata version 3.00 loaded.
[    1.432044] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.432190] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.432193] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.432195] usb usb1: Product: EHCI Host Controller
[    1.432196] usb usb1: Manufacturer: Linux 4.9.0-2-amd64 ehci_hcd
[    1.432198] usb usb1: SerialNumber: 0000:00:1d.7
[    1.432398] hub 1-0:1.0: USB hub found
[    1.432410] hub 1-0:1.0: 6 ports detected
[    1.432998] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.433009] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.433019] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.433057] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00003080
[    1.433152] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.433154] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.433156] usb usb2: Product: UHCI Host Controller
[    1.433157] usb usb2: Manufacturer: Linux 4.9.0-2-amd64 uhci_hcd
[    1.433159] usb usb2: SerialNumber: 0000:00:1d.0
[    1.433337] hub 2-0:1.0: USB hub found
[    1.433347] hub 2-0:1.0: 2 ports detected
[    1.433672] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.433681] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.433690] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.433722] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00003060
[    1.433798] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.433800] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.433802] usb usb3: Product: UHCI Host Controller
[    1.433804] usb usb3: Manufacturer: Linux 4.9.0-2-amd64 uhci_hcd
[    1.433805] usb usb3: SerialNumber: 0000:00:1d.1
[    1.433974] hub 3-0:1.0: USB hub found
[    1.433983] hub 3-0:1.0: 2 ports detected
[    1.434283] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.434290] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.434302] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.434326] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00003040
[    1.434392] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.434394] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.434396] usb usb4: Product: UHCI Host Controller
[    1.434398] usb usb4: Manufacturer: Linux 4.9.0-2-amd64 uhci_hcd
[    1.434400] usb usb4: SerialNumber: 0000:00:1d.2
[    1.434560] hub 4-0:1.0: USB hub found
[    1.434568] hub 4-0:1.0: 2 ports detected
[    1.435160] ata_piix 0000:00:1f.1: version 2.13
[    1.449614] scsi host0: ata_piix
[    1.457443] scsi host1: ata_piix
[    1.457542] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30a0 irq 14
[    1.457544] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30a8 irq 15
[    1.457795] ahci 0000:00:1f.2: version 3.0
[    1.458126] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.458155] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
[    1.458157] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems 
[    1.465864] scsi host2: ahci
[    1.475731] scsi host3: ahci
[    1.489793] scsi host4: ahci
[    1.489910] ata3: SATA max UDMA/133 abar m2048@0x92404000 port 0x92404100 irq 25
[    1.489911] ata4: DUMMY
[    1.489913] ata5: DUMMY
[    1.641586] ata1.00: ATAPI: TSSTcorp CDDVDW TS-L632H, HS02, max MWDMA2
[    1.665842] ata1.00: configured for MWDMA2
[    1.668867] scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L632H  HS02 PQ: 0 ANSI: 5
[    1.760023] usb 1-6: new high-speed USB device number 2 using ehci-pci
[    1.928131] usb 1-6: New USB device found, idVendor=04f2, idProduct=b057
[    1.928133] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    1.928135] usb 1-6: Product: CNF7041
[    1.928136] usb 1-6: Manufacturer: Chicony Electronics Co., Ltd.
[    1.928138] usb 1-6: SerialNumber: SN0001
[    1.968077] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.968631] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.968635] ata3.00: ATA-8: FUJITSU MHY2120BH, 890B, max UDMA/100
[    1.968637] ata3.00: 234441648 sectors, multi 16: LBA48 
[    1.969231] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.969235] ata3.00: configured for UDMA/100
[    1.969466] scsi 2:0:0:0: Direct-Access     ATA      FUJITSU MHY2120B 890B PQ: 0 ANSI: 5
[    1.986035] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    1.986099] sd 2:0:0:0: [sda] Write Protect is off
[    1.986102] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.986130] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.006304] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.006307] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.006832] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    2.051580]  sda: sda1 sda2 < sda5 >
[    2.052022] random: fast init done
[    2.052514] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.081415] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x35adab507b1, max_idle_ns: 881590740985 ns
[    2.492474] PM: Starting manual resume from disk
[    2.492480] PM: Hibernation image partition 8:5 present
[    2.492481] PM: Looking for hibernation image.
[    2.492801] PM: Image not found (code -22)
[    2.492802] PM: Hibernation image not present or could not be loaded.
[    2.706170] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.912328] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2
[    4.303646] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.449697] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    4.449862] systemd[1]: Detected architecture x86-64.
[    4.463292] systemd[1]: Set hostname to <cax>.
[    4.712704] random: crng init done
[    5.748559] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.748742] systemd[1]: Listening on Journal Socket.
[    5.749001] systemd[1]: Created slice User and Session Slice.
[    5.749067] systemd[1]: Listening on udev Kernel Socket.
[    5.749147] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.749203] systemd[1]: Listening on Syslog Socket.
[    5.749412] systemd[1]: Created slice System Slice.
[    6.336200] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    6.438292] systemd-journald[171]: Received request to flush runtime journal from PID 1
[    9.454131] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    9.454138] ACPI: Power Button [PWRB]
[    9.456433] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[    9.456456] ACPI: Lid Switch [LID0]
[    9.456531] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[    9.456534] ACPI: Sleep Button [SLPB]
[    9.456621] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    9.456624] ACPI: Power Button [PWRF]
[    9.813087] [drm] Initialized
[    9.852155] ACPI: AC Adapter [AC] (on-line)
[    9.884205] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.924092] ACPI: Battery Slot [BAT0] (battery absent)
[    9.924369] wmi: Mapper loaded
[   10.263847] sr 0:0:0:0: Attached scsi generic sg0 type 5
[   10.263911] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   10.490717] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20160831/utaddress-247)
[   10.490726] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000043B (\_SB.PCI0.LPC.PMA1) (20160831/utaddress-247)
[   10.490731] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.490735] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000052D (\GPIO) (20160831/utaddress-247)
[   10.490739] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.490776] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.543797] ath5k 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[   10.543998] ath5k 0000:01:00.0: registered as 'phy0'
[   10.886520] snd_hda_codec_conexant hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing.
[   10.887030] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20561 (Hermosa): line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[   10.887033] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.887035] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[   10.887037] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[   10.887038] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[   10.887040] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x1d
[   10.887042] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x18
[   10.887791] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[   10.894260] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   10.894599] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   10.894685] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   10.927877] input: PC Speaker as /devices/platform/pcspkr/input/input10
[   11.043977] intel_powerclamp: No package C-state available
[   11.051697] pci 0000:00:00.0: Intel 965GM Chipset
[   11.051769] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[   11.051953] pci 0000:00:00.0: detected 8192K stolen memory
[   11.053094] [drm] Memory usable by graphics device = 512M
[   11.053133] [drm] Replacing VGA console driver
[   11.055120] Console: switching to colour dummy device 80x25
[   11.058965] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   11.058967] [drm] Driver supports precise vblank timestamp query.
[   11.060643] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   11.092146] [drm] RC6 disabled, disabling runtime PM support
[   11.092160] [drm] initialized overlay support
[   11.092637] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[   11.093358] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[   11.102325] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[   11.114239] acpi device:15: registered as cooling_device1
[   11.114350] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[   11.114464] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[   11.174040] ath: EEPROM regdomain: 0x67
[   11.174042] ath: EEPROM indicates we should expect a direct regpair map
[   11.174045] ath: Country alpha2 being used: 00
[   11.174046] ath: Regpair used: 0x67
[   11.209376] media: Linux media interface: v0.10
[   11.263148] Linux video capture interface: v2.00
[   11.281975] input: HP WMI hotkeys as /devices/virtual/input/input12
[   11.381900] uvcvideo: Found UVC 1.00 device CNF7041 (04f2:b057)
[   11.386292] uvcvideo 1-6:1.0: Entity type for entity Extension 5 was not initialized!
[   11.386297] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
[   11.386300] uvcvideo 1-6:1.0: Entity type for entity Processing 3 was not initialized!
[   11.386303] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
[   11.386694] input: CNF7041 as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input13
[   11.387384] usbcore: registered new interface driver uvcvideo
[   11.387386] USB Video Class driver (1.1.1)
[   11.618993] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.619419] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   11.758584] Adding 4172796k swap on /dev/sda5.  Priority:-1 extents:1 across:4172796k FS
[   11.823803] iTCO_vendor_support: vendor-support=0
[   11.848246] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   11.848318] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
[   11.848922] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   21.216062] [drm:drm_atomic_helper_commit_cleanup_done [drm_kms_helper]] *ERROR* [CRTC:26:pipe A] flip_done timed out
[   21.320029] ------------[ cut here ]------------
[   21.320072] WARNING: CPU: 0 PID: 96 at /build/linux-QtSjAP/linux-4.9.13/drivers/gpu/drm/drm_irq.c:1254 drm_wait_one_vblank+0x197/0x1a0 [drm]
[   21.320073] vblank wait timed out on crtc 0
[   21.320074] Modules linked in: iTCO_wdt iTCO_vendor_support arc4 uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core hp_wmi videodev sparse_keymap media i915 pcspkr coretemp joydev snd_hda_codec_conexant snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep ath5k evdev ath lpc_ich snd_pcm_oss snd_mixer_oss serio_raw mfd_core mac80211 sg snd_pcm snd_timer cfg80211 rfkill wmi drm_kms_helper shpchp snd soundcore drm video battery ac i2c_algo_bit button acpi_cpufreq tpm_tis tpm_tis_core tpm binfmt_misc ip_tables x_tables autofs4 ext4 crc16 jbd2 crc32c_generic fscrypto ecb glue_helper lrw gf128mul ablk_helper cryptd aes_x86_64 mbcache sr_mod sd_mod cdrom ata_generic ahci libahci ata_piix libata psmouse uhci_hcd ehci_pci ehci_hcd scsi_mod i2c_i801 i2c_smbus 8139too
[   21.320135]  8139cp mii usbcore usb_common thermal fjes
[   21.320142] CPU: 0 PID: 96 Comm: kworker/u4:4 Not tainted 4.9.0-2-amd64 #1 Debian 4.9.13-1
[   21.320143] Hardware name: Hewlett-Packard Compaq Presario C700 Notebook PC/30D9, BIOS F.34 09/25/2008
[   21.320149] Workqueue: events_unbound async_run_entry_fn
[   21.320151]  0000000000000000 ffffffff99128594 ffffa8cf4059ba60 0000000000000000
[   21.320155]  ffffffff98e76dde ffff9cd7b9320000 ffffa8cf4059bab8 0000000000000000
[   21.320157]  0000000001000001 ffff9cd7ba332408 ffff9cd7bb33c800 ffffffff98e76e5f
[   21.320160] Call Trace:
[   21.320169]  [<ffffffff99128594>] ? dump_stack+0x5c/0x78
[   21.320173]  [<ffffffff98e76dde>] ? __warn+0xbe/0xe0
[   21.320175]  [<ffffffff98e76e5f>] ? warn_slowpath_fmt+0x5f/0x80
[   21.320178]  [<ffffffff98eb8a6c>] ? finish_wait+0x3c/0x70
[   21.320192]  [<ffffffffc02ff3c7>] ? drm_wait_one_vblank+0x197/0x1a0 [drm]
[   21.320194]  [<ffffffff98eb8c70>] ? prepare_to_wait_event+0xf0/0xf0
[   21.320268]  [<ffffffffc0664da4>] ? intel_get_load_detect_pipe+0x624/0x640 [i915]
[   21.320306]  [<ffffffffc069fd25>] ? intel_tv_detect+0x155/0x550 [i915]
[   21.320322]  [<ffffffffc0316bf8>] ? drm_property_replace_global_blob+0xd8/0x120 [drm]
[   21.320343]  [<ffffffffc03830a6>] ? drm_helper_probe_single_connector_modes+0x3f6/0x4e0 [drm_kms_helper]
[   21.320350]  [<ffffffffc039133c>] ? drm_fb_helper_initial_config+0xac/0x440 [drm_kms_helper]
[   21.320388]  [<ffffffffc067ad34>] ? intel_fbdev_initial_config+0x14/0x30 [i915]
[   21.320390]  [<ffffffff98e99414>] ? async_run_entry_fn+0x34/0x140
[   21.320393]  [<ffffffff98e902d4>] ? process_one_work+0x184/0x410
[   21.320394]  [<ffffffff98e905ad>] ? worker_thread+0x4d/0x480
[   21.320396]  [<ffffffff98e90560>] ? process_one_work+0x410/0x410
[   21.320402]  [<ffffffff98e9651e>] ? kthread+0xce/0xf0
[   21.320405]  [<ffffffff98e24701>] ? __switch_to+0x2c1/0x6c0
[   21.320407]  [<ffffffff98e96450>] ? kthread_park+0x60/0x60
[   21.320410]  [<ffffffff993fb135>] ? ret_from_fork+0x25/0x30
[   21.320412] ---[ end trace 619073d806b370dc ]---
[   21.458736] ------------[ cut here ]------------
[   21.458781] WARNING: CPU: 0 PID: 96 at /build/linux-QtSjAP/linux-4.9.13/drivers/gpu/drm/drm_irq.c:1254 drm_wait_one_vblank+0x197/0x1a0 [drm]
[   21.458782] vblank wait timed out on crtc 0
[   21.458783] Modules linked in: iTCO_wdt iTCO_vendor_support arc4 uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core hp_wmi videodev sparse_keymap media i915 pcspkr coretemp joydev snd_hda_codec_conexant snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep ath5k evdev ath lpc_ich snd_pcm_oss snd_mixer_oss serio_raw mfd_core mac80211 sg snd_pcm snd_timer cfg80211 rfkill wmi drm_kms_helper shpchp snd soundcore drm video battery ac i2c_algo_bit button acpi_cpufreq tpm_tis tpm_tis_core tpm binfmt_misc ip_tables x_tables autofs4 ext4 crc16 jbd2 crc32c_generic fscrypto ecb glue_helper lrw gf128mul ablk_helper cryptd aes_x86_64 mbcache sr_mod sd_mod cdrom ata_generic ahci libahci ata_piix libata psmouse uhci_hcd ehci_pci ehci_hcd scsi_mod i2c_i801 i2c_smbus 8139too
[   21.458840]  8139cp mii usbcore usb_common thermal fjes
[   21.458848] CPU: 0 PID: 96 Comm: kworker/u4:4 Tainted: G        W       4.9.0-2-amd64 #1 Debian 4.9.13-1
[   21.458849] Hardware name: Hewlett-Packard Compaq Presario C700 Notebook PC/30D9, BIOS F.34 09/25/2008
[   21.458855] Workqueue: events_unbound async_run_entry_fn
[   21.458858]  0000000000000000 ffffffff99128594 ffffa8cf4059b958 0000000000000000
[   21.458861]  ffffffff98e76dde ffff9cd7b9320000 ffffa8cf4059b9b0 0000000000000000
[   21.458864]  0000000002000001 ffff9cd7ba332408 ffff9cd7bb331180 ffffffff98e76e5f
[   21.458867] Call Trace:
[   21.458872]  [<ffffffff99128594>] ? dump_stack+0x5c/0x78
[   21.458876]  [<ffffffff98e76dde>] ? __warn+0xbe/0xe0
[   21.458878]  [<ffffffff98e76e5f>] ? warn_slowpath_fmt+0x5f/0x80
[   21.458881]  [<ffffffff98eb8a6c>] ? finish_wait+0x3c/0x70
[   21.458895]  [<ffffffffc02ff3c7>] ? drm_wait_one_vblank+0x197/0x1a0 [drm]
[   21.458897]  [<ffffffff98eb8c70>] ? prepare_to_wait_event+0xf0/0xf0
[   21.458967]  [<ffffffffc065ea97>] ? intel_pre_plane_update+0x127/0x150 [i915]
[   21.459007]  [<ffffffffc065f0e3>] ? intel_atomic_commit_tail+0x153/0xf50 [i915]
[   21.459009]  [<ffffffff993f846e>] ? mutex_lock+0xe/0x30
[   21.459048]  [<ffffffffc06672ea>] ? intel_prepare_plane_fb+0x14a/0x290 [i915]
[   21.459088]  [<ffffffffc0660235>] ? intel_atomic_commit+0x355/0x4c0 [i915]
[   21.459127]  [<ffffffffc0664e0c>] ? intel_release_load_detect_pipe+0x4c/0x80 [i915]
[   21.459165]  [<ffffffffc069ff59>] ? intel_tv_detect+0x389/0x550 [i915]
[   21.459181]  [<ffffffffc0316bf8>] ? drm_property_replace_global_blob+0xd8/0x120 [drm]
[   21.459198]  [<ffffffffc03830a6>] ? drm_helper_probe_single_connector_modes+0x3f6/0x4e0 [drm_kms_helper]
[   21.459206]  [<ffffffffc039133c>] ? drm_fb_helper_initial_config+0xac/0x440 [drm_kms_helper]
[   21.459244]  [<ffffffffc067ad34>] ? intel_fbdev_initial_config+0x14/0x30 [i915]
[   21.459246]  [<ffffffff98e99414>] ? async_run_entry_fn+0x34/0x140
[   21.459248]  [<ffffffff98e902d4>] ? process_one_work+0x184/0x410
[   21.459250]  [<ffffffff98e905ad>] ? worker_thread+0x4d/0x480
[   21.459251]  [<ffffffff98e90560>] ? process_one_work+0x410/0x410
[   21.459253]  [<ffffffff98e9651e>] ? kthread+0xce/0xf0
[   21.459256]  [<ffffffff98e24701>] ? __switch_to+0x2c1/0x6c0
[   21.459258]  [<ffffffff98e96450>] ? kthread_park+0x60/0x60
[   21.459261]  [<ffffffff993fb135>] ? ret_from_fork+0x25/0x30
[   21.459263] ---[ end trace 619073d806b370dd ]---
[   21.518909] fbcon: inteldrmfb (fb0) is primary device
[   25.114682] NET: Registered protocol family 4
[   25.131324] NET: Registered protocol family 3
[   25.136158] NET: Registered protocol family 5
[   25.215497] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   31.033409] 8139too 0000:02:01.0 eth0: link down
[   31.033530] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   32.480090] [drm:drm_atomic_helper_commit_cleanup_done [drm_kms_helper]] *ERROR* [CRTC:26:pipe A] flip_done timed out
[   32.584021] ------------[ cut here ]------------
[   32.584060] WARNING: CPU: 0 PID: 96 at /build/linux-QtSjAP/linux-4.9.13/drivers/gpu/drm/drm_irq.c:1254 drm_wait_one_vblank+0x197/0x1a0 [drm]
[   32.584061] vblank wait timed out on crtc 0
[   32.584108] Modules linked in: appletalk ax25 ipx p8023 p8022 psnap llc snd_hrtimer snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device iTCO_wdt iTCO_vendor_support arc4 uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core hp_wmi videodev sparse_keymap media i915 pcspkr coretemp joydev snd_hda_codec_conexant snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep ath5k evdev ath lpc_ich snd_pcm_oss snd_mixer_oss serio_raw mfd_core mac80211 sg snd_pcm snd_timer cfg80211 rfkill wmi drm_kms_helper shpchp snd soundcore drm video battery ac i2c_algo_bit button acpi_cpufreq tpm_tis tpm_tis_core tpm binfmt_misc ip_tables x_tables autofs4 ext4 crc16 jbd2 crc32c_generic fscrypto ecb glue_helper lrw gf128mul ablk_helper cryptd aes_x86_64 mbcache sr_mod sd_mod
[   32.584119]  cdrom ata_generic ahci libahci ata_piix libata psmouse uhci_hcd ehci_pci ehci_hcd scsi_mod i2c_i801 i2c_smbus 8139too 8139cp mii usbcore usb_common thermal fjes
[   32.584123] CPU: 0 PID: 96 Comm: kworker/u4:4 Tainted: G        W       4.9.0-2-amd64 #1 Debian 4.9.13-1
[   32.584123] Hardware name: Hewlett-Packard Compaq Presario C700 Notebook PC/30D9, BIOS F.34 09/25/2008
[   32.584130] Workqueue: events_unbound async_run_entry_fn
[   32.584133]  0000000000000000 ffffffff99128594 ffffa8cf4059b7d0 0000000000000000
[   32.584136]  ffffffff98e76dde ffff9cd7b9320000 ffffa8cf4059b828 0000000000000000
[   32.584138]  0000000003000002 ffff9cd7ba332408 ffff9cd7bb33c800 ffffffff98e76e5f
[   32.584138] Call Trace:
[   32.584144]  [<ffffffff99128594>] ? dump_stack+0x5c/0x78
[   32.584148]  [<ffffffff98e76dde>] ? __warn+0xbe/0xe0
[   32.584150]  [<ffffffff98e76e5f>] ? warn_slowpath_fmt+0x5f/0x80
[   32.584152]  [<ffffffff98eb8a6c>] ? finish_wait+0x3c/0x70
[   32.584167]  [<ffffffffc02ff3c7>] ? drm_wait_one_vblank+0x197/0x1a0 [drm]
[   32.584169]  [<ffffffff98eb8c70>] ? prepare_to_wait_event+0xf0/0xf0
[   32.584242]  [<ffffffffc0664da4>] ? intel_get_load_detect_pipe+0x624/0x640 [i915]
[   32.584281]  [<ffffffffc069fd25>] ? intel_tv_detect+0x155/0x550 [i915]
[   32.584291]  [<ffffffffc03830a6>] ? drm_helper_probe_single_connector_modes+0x3f6/0x4e0 [drm_kms_helper]
[   32.584307]  [<ffffffffc0311364>] ? drm_atomic_clean_old_fb+0x64/0xc0 [drm]
[   32.584314]  [<ffffffffc0391182>] ? drm_fb_helper_hotplug_event+0x102/0x150 [drm_kms_helper]
[   32.584321]  [<ffffffffc0391220>] ? drm_fb_helper_restore_fbdev_mode_unlocked+0x50/0x70 [drm_kms_helper]
[   32.584328]  [<ffffffffc0391269>] ? drm_fb_helper_set_par+0x29/0x50 [drm_kms_helper]
[   32.584366]  [<ffffffffc0679c83>] ? intel_fbdev_set_par+0x13/0x60 [i915]
[   32.584368]  [<ffffffff991a20b0>] ? fbcon_init+0x570/0x600
[   32.584371]  [<ffffffff99225c8f>] ? visual_init+0xcf/0x130
[   32.584373]  [<ffffffff9922729f>] ? do_bind_con_driver+0x1cf/0x3b0
[   32.584375]  [<ffffffff992277ae>] ? do_take_over_console+0x10e/0x170
[   32.584377]  [<ffffffff9919df58>] ? do_fbcon_takeover+0x58/0xb0
[   32.584380]  [<ffffffff98e97b85>] ? notifier_call_chain+0x45/0x70
[   32.584382]  [<ffffffff98e97e91>] ? __blocking_notifier_call_chain+0x41/0x60
[   32.584384]  [<ffffffff991aa332>] ? register_framebuffer+0x212/0x360
[   32.584388]  [<ffffffff992646d9>] ? vga_switcheroo_client_fb_set+0x19/0x70
[   32.584395]  [<ffffffffc039152e>] ? drm_fb_helper_initial_config+0x29e/0x440 [drm_kms_helper]
[   32.584433]  [<ffffffffc067ad34>] ? intel_fbdev_initial_config+0x14/0x30 [i915]
[   32.584435]  [<ffffffff98e99414>] ? async_run_entry_fn+0x34/0x140
[   32.584437]  [<ffffffff98e902d4>] ? process_one_work+0x184/0x410
[   32.584438]  [<ffffffff98e905ad>] ? worker_thread+0x4d/0x480
[   32.584440]  [<ffffffff98e90560>] ? process_one_work+0x410/0x410
[   32.584442]  [<ffffffff98e9651e>] ? kthread+0xce/0xf0
[   32.584444]  [<ffffffff98e24701>] ? __switch_to+0x2c1/0x6c0
[   32.584446]  [<ffffffff98e96450>] ? kthread_park+0x60/0x60
[   32.584449]  [<ffffffff993fb135>] ? ret_from_fork+0x25/0x30
[   32.584451] ---[ end trace 619073d806b370de ]---
[   32.725156] ------------[ cut here ]------------
[   32.725173] WARNING: CPU: 0 PID: 96 at /build/linux-QtSjAP/linux-4.9.13/drivers/gpu/drm/drm_irq.c:1254 drm_wait_one_vblank+0x197/0x1a0 [drm]
[   32.725174] vblank wait timed out on crtc 0
[   32.725209] Modules linked in: appletalk ax25 ipx p8023 p8022 psnap llc snd_hrtimer snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device iTCO_wdt iTCO_vendor_support arc4 uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core hp_wmi videodev sparse_keymap media i915 pcspkr coretemp joydev snd_hda_codec_conexant snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep ath5k evdev ath lpc_ich snd_pcm_oss snd_mixer_oss serio_raw mfd_core mac80211 sg snd_pcm snd_timer cfg80211 rfkill wmi drm_kms_helper shpchp snd soundcore drm video battery ac i2c_algo_bit button acpi_cpufreq tpm_tis tpm_tis_core tpm binfmt_misc ip_tables x_tables autofs4 ext4 crc16 jbd2 crc32c_generic fscrypto ecb glue_helper lrw gf128mul ablk_helper cryptd aes_x86_64 mbcache sr_mod sd_mod
[   32.725218]  cdrom ata_generic ahci libahci ata_piix libata psmouse uhci_hcd ehci_pci ehci_hcd scsi_mod i2c_i801 i2c_smbus 8139too 8139cp mii usbcore usb_common thermal fjes
[   32.725220] CPU: 0 PID: 96 Comm: kworker/u4:4 Tainted: G        W       4.9.0-2-amd64 #1 Debian 4.9.13-1
[   32.725221] Hardware name: Hewlett-Packard Compaq Presario C700 Notebook PC/30D9, BIOS F.34 09/25/2008
[   32.725224] Workqueue: events_unbound async_run_entry_fn
[   32.725227]  0000000000000000 ffffffff99128594 ffffa8cf4059b6c8 0000000000000000
[   32.725229]  ffffffff98e76dde ffff9cd7b9320000 ffffa8cf4059b720 0000000000000000
[   32.725231]  0000000004000002 ffff9cd7ba332408 ffff9cd7bbcc0240 ffffffff98e76e5f
[   32.725232] Call Trace:
[   32.725235]  [<ffffffff99128594>] ? dump_stack+0x5c/0x78
[   32.725238]  [<ffffffff98e76dde>] ? __warn+0xbe/0xe0
[   32.725240]  [<ffffffff98e76e5f>] ? warn_slowpath_fmt+0x5f/0x80
[   32.725242]  [<ffffffff98eb8a6c>] ? finish_wait+0x3c/0x70
[   32.725256]  [<ffffffffc02ff3c7>] ? drm_wait_one_vblank+0x197/0x1a0 [drm]
[   32.725257]  [<ffffffff98eb8c70>] ? prepare_to_wait_event+0xf0/0xf0
[   32.725299]  [<ffffffffc065ea97>] ? intel_pre_plane_update+0x127/0x150 [i915]
[   32.725338]  [<ffffffffc065f0e3>] ? intel_atomic_commit_tail+0x153/0xf50 [i915]
[   32.725339]  [<ffffffff993f846e>] ? mutex_lock+0xe/0x30
[   32.725378]  [<ffffffffc06672ea>] ? intel_prepare_plane_fb+0x14a/0x290 [i915]
[   32.725417]  [<ffffffffc0660235>] ? intel_atomic_commit+0x355/0x4c0 [i915]
[   32.725456]  [<ffffffffc0664e0c>] ? intel_release_load_detect_pipe+0x4c/0x80 [i915]
[   32.725494]  [<ffffffffc069ff59>] ? intel_tv_detect+0x389/0x550 [i915]
[   32.725504]  [<ffffffffc03830a6>] ? drm_helper_probe_single_connector_modes+0x3f6/0x4e0 [drm_kms_helper]
[   32.725520]  [<ffffffffc0311364>] ? drm_atomic_clean_old_fb+0x64/0xc0 [drm]
[   32.725527]  [<ffffffffc0391182>] ? drm_fb_helper_hotplug_event+0x102/0x150 [drm_kms_helper]
[   32.725534]  [<ffffffffc0391220>] ? drm_fb_helper_restore_fbdev_mode_unlocked+0x50/0x70 [drm_kms_helper]
[   32.725541]  [<ffffffffc0391269>] ? drm_fb_helper_set_par+0x29/0x50 [drm_kms_helper]
[   32.725578]  [<ffffffffc0679c83>] ? intel_fbdev_set_par+0x13/0x60 [i915]
[   32.725580]  [<ffffffff991a20b0>] ? fbcon_init+0x570/0x600
[   32.725583]  [<ffffffff99225c8f>] ? visual_init+0xcf/0x130
[   32.725584]  [<ffffffff9922729f>] ? do_bind_con_driver+0x1cf/0x3b0
[   32.725586]  [<ffffffff992277ae>] ? do_take_over_console+0x10e/0x170
[   32.725588]  [<ffffffff9919df58>] ? do_fbcon_takeover+0x58/0xb0
[   32.725590]  [<ffffffff98e97b85>] ? notifier_call_chain+0x45/0x70
[   32.725592]  [<ffffffff98e97e91>] ? __blocking_notifier_call_chain+0x41/0x60
[   32.725594]  [<ffffffff991aa332>] ? register_framebuffer+0x212/0x360
[   32.725597]  [<ffffffff992646d9>] ? vga_switcheroo_client_fb_set+0x19/0x70
[   32.725604]  [<ffffffffc039152e>] ? drm_fb_helper_initial_config+0x29e/0x440 [drm_kms_helper]
[   32.725642]  [<ffffffffc067ad34>] ? intel_fbdev_initial_config+0x14/0x30 [i915]
[   32.725644]  [<ffffffff98e99414>] ? async_run_entry_fn+0x34/0x140
[   32.725645]  [<ffffffff98e902d4>] ? process_one_work+0x184/0x410
[   32.725647]  [<ffffffff98e905ad>] ? worker_thread+0x4d/0x480
[   32.725648]  [<ffffffff98e90560>] ? process_one_work+0x410/0x410
[   32.725650]  [<ffffffff98e9651e>] ? kthread+0xce/0xf0
[   32.725652]  [<ffffffff98e24701>] ? __switch_to+0x2c1/0x6c0
[   32.725654]  [<ffffffff98e96450>] ? kthread_park+0x60/0x60
[   32.725656]  [<ffffffff993fb135>] ? ret_from_fork+0x25/0x30
[   32.725657] ---[ end trace 619073d806b370df ]---
[   32.789290] Console: switching to colour frame buffer device 160x50
[   32.808334] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   34.669683] systemd[1]: apt-daily.timer: Adding 6h 7min 30.635963s random time.
[   34.956454] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   35.195130] systemd[1]: apt-daily.timer: Adding 8h 6min 4.326614s random time.
[   35.265695] 8139too 0000:02:01.0 eth0: link down
[   35.265813] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   35.389009] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   38.673296] wlan0: authenticate with d4:63:fe:12:8b:7e
[   38.681143] wlan0: send auth to d4:63:fe:12:8b:7e (try 1/3)
[   38.682654] wlan0: authenticated
[   38.684371] wlan0: associate with d4:63:fe:12:8b:7e (try 1/3)
[   38.687596] wlan0: RX AssocResp from d4:63:fe:12:8b:7e (capab=0x411 status=0 aid=2)
[   38.687697] wlan0: associated
[   38.687710] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   38.724944] ath: EEPROM regdomain: 0x82d4
[   38.724947] ath: EEPROM indicates we should expect a country code
[   38.724948] ath: doing EEPROM country->regdmn map search
[   38.724949] ath: country maps to regdmn code: 0x37
[   38.724950] ath: Country alpha2 being used: ES
[   38.724951] ath: Regpair used: 0x37
[   38.724952] ath: regdomain 0x82d4 dynamically updated by country IE
[   39.985381] systemd[1]: apt-daily.timer: Adding 5h 43min 57.109609s random time.
[   44.000116] [drm:drm_atomic_helper_commit_cleanup_done [drm_kms_helper]] *ERROR* [CRTC:26:pipe A] flip_done timed out
[   44.102192] ------------[ cut here ]------------
[   44.102229] WARNING: CPU: 0 PID: 672 at /build/linux-QtSjAP/linux-4.9.13/drivers/gpu/drm/drm_irq.c:1254 drm_wait_one_vblank+0x197/0x1a0 [drm]
[   44.102230] vblank wait timed out on crtc 0
[   44.102231] Modules linked in: ctr ccm appletalk ax25 ipx p8023 p8022 psnap llc snd_hrtimer snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device iTCO_wdt iTCO_vendor_support arc4 uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core hp_wmi videodev sparse_keymap media i915 pcspkr coretemp joydev snd_hda_codec_conexant snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep ath5k evdev ath lpc_ich snd_pcm_oss snd_mixer_oss serio_raw mfd_core mac80211 sg snd_pcm snd_timer cfg80211 rfkill wmi drm_kms_helper shpchp snd soundcore drm video battery ac i2c_algo_bit button acpi_cpufreq tpm_tis tpm_tis_core tpm binfmt_misc ip_tables x_tables autofs4 ext4 crc16 jbd2 crc32c_generic fscrypto ecb glue_helper lrw gf128mul ablk_helper cryptd aes_x86_64 mbcache
[   44.102289]  sr_mod sd_mod cdrom ata_generic ahci libahci ata_piix libata psmouse uhci_hcd ehci_pci ehci_hcd scsi_mod i2c_i801 i2c_smbus 8139too 8139cp mii usbcore usb_common thermal fjes
[   44.102306] CPU: 0 PID: 672 Comm: Xorg Tainted: G        W       4.9.0-2-amd64 #1 Debian 4.9.13-1
[   44.102308] Hardware name: Hewlett-Packard Compaq Presario C700 Notebook PC/30D9, BIOS F.34 09/25/2008
[   44.102310]  0000000000000000 ffffffff99128594 ffffa8cf406739a0 0000000000000000
[   44.102313]  ffffffff98e76dde ffff9cd7b9320000 ffffa8cf406739f8 0000000000000000
[   44.102316]  0000000005000003 ffff9cd7ba332408 ffff9cd7bb33c800 ffffffff98e76e5f
[   44.102318] Call Trace:
[   44.102326]  [<ffffffff99128594>] ? dump_stack+0x5c/0x78
[   44.102330]  [<ffffffff98e76dde>] ? __warn+0xbe/0xe0
[   44.102332]  [<ffffffff98e76e5f>] ? warn_slowpath_fmt+0x5f/0x80
[   44.102335]  [<ffffffff98eb8a6c>] ? finish_wait+0x3c/0x70
[   44.102349]  [<ffffffffc02ff3c7>] ? drm_wait_one_vblank+0x197/0x1a0 [drm]
[   44.102351]  [<ffffffff98eb8c70>] ? prepare_to_wait_event+0xf0/0xf0
[   44.102406]  [<ffffffffc0664da4>] ? intel_get_load_detect_pipe+0x624/0x640 [i915]
[   44.102433]  [<ffffffffc069fd25>] ? intel_tv_detect+0x155/0x550 [i915]
[   44.102449]  [<ffffffffc03830a6>] ? drm_helper_probe_single_connector_modes+0x3f6/0x4e0 [drm_kms_helper]
[   44.102483]  [<ffffffffc0246aa7>] ? __ext4_journal_stop+0x37/0x90 [ext4]
[   44.102500]  [<ffffffffc0315954>] ? drm_mode_getconnector+0x324/0x360 [drm]
[   44.102515]  [<ffffffffc03105d1>] ? drm_modeset_unlock_all+0x31/0x60 [drm]
[   44.102529]  [<ffffffffc02fda9a>] ? drm_ioctl+0x1ea/0x470 [drm]
[   44.102544]  [<ffffffffc0315630>] ? drm_mode_connector_property_set_ioctl+0x60/0x60 [drm]
[   44.102547]  [<ffffffff9901600f>] ? do_vfs_ioctl+0x9f/0x600
[   44.102550]  [<ffffffff99001f84>] ? vfs_write+0x154/0x190
[   44.102551]  [<ffffffff990165e4>] ? SyS_ioctl+0x74/0x80
[   44.102555]  [<ffffffff993faebb>] ? system_call_fast_compare_end+0xc/0x9b
[   44.102557] ---[ end trace 619073d806b370e0 ]---
[   44.289481] ------------[ cut here ]------------
[   44.289518] WARNING: CPU: 0 PID: 672 at /build/linux-QtSjAP/linux-4.9.13/drivers/gpu/drm/drm_irq.c:1254 drm_wait_one_vblank+0x197/0x1a0 [drm]
[   44.289519] vblank wait timed out on crtc 0
[   44.289519] Modules linked in: ctr ccm appletalk ax25 ipx p8023 p8022 psnap llc snd_hrtimer snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device iTCO_wdt iTCO_vendor_support arc4 uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core hp_wmi videodev sparse_keymap media i915 pcspkr coretemp joydev snd_hda_codec_conexant snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep ath5k evdev ath lpc_ich snd_pcm_oss snd_mixer_oss serio_raw mfd_core mac80211 sg snd_pcm snd_timer cfg80211 rfkill wmi drm_kms_helper shpchp snd soundcore drm video battery ac i2c_algo_bit button acpi_cpufreq tpm_tis tpm_tis_core tpm binfmt_misc ip_tables x_tables autofs4 ext4 crc16 jbd2 crc32c_generic fscrypto ecb glue_helper lrw gf128mul ablk_helper cryptd aes_x86_64 mbcache
[   44.289576]  sr_mod sd_mod cdrom ata_generic ahci libahci ata_piix libata psmouse uhci_hcd ehci_pci ehci_hcd scsi_mod i2c_i801 i2c_smbus 8139too 8139cp mii usbcore usb_common thermal fjes
[   44.289594] CPU: 0 PID: 672 Comm: Xorg Tainted: G        W       4.9.0-2-amd64 #1 Debian 4.9.13-1
[   44.289595] Hardware name: Hewlett-Packard Compaq Presario C700 Notebook PC/30D9, BIOS F.34 09/25/2008
[   44.289597]  0000000000000000 ffffffff99128594 ffffa8cf40673898 0000000000000000
[   44.289600]  ffffffff98e76dde ffff9cd7b9320000 ffffa8cf406738f0 0000000000000000
[   44.289603]  0000000006000003 ffff9cd7ba332408 ffff9cd7bbdeb900 ffffffff98e76e5f
[   44.289606] Call Trace:
[   44.289613]  [<ffffffff99128594>] ? dump_stack+0x5c/0x78
[   44.289616]  [<ffffffff98e76dde>] ? __warn+0xbe/0xe0
[   44.289618]  [<ffffffff98e76e5f>] ? warn_slowpath_fmt+0x5f/0x80
[   44.289621]  [<ffffffff98eb8a6c>] ? finish_wait+0x3c/0x70
[   44.289635]  [<ffffffffc02ff3c7>] ? drm_wait_one_vblank+0x197/0x1a0 [drm]
[   44.289637]  [<ffffffff98eb8c70>] ? prepare_to_wait_event+0xf0/0xf0
[   44.289689]  [<ffffffffc065ea97>] ? intel_pre_plane_update+0x127/0x150 [i915]
[   44.289717]  [<ffffffffc065f0e3>] ? intel_atomic_commit_tail+0x153/0xf50 [i915]
[   44.289719]  [<ffffffff993f846e>] ? mutex_lock+0xe/0x30
[   44.289747]  [<ffffffffc06672ea>] ? intel_prepare_plane_fb+0x14a/0x290 [i915]
[   44.289775]  [<ffffffffc0660235>] ? intel_atomic_commit+0x355/0x4c0 [i915]
[   44.289803]  [<ffffffffc0664e0c>] ? intel_release_load_detect_pipe+0x4c/0x80 [i915]
[   44.289830]  [<ffffffffc069ff59>] ? intel_tv_detect+0x389/0x550 [i915]
[   44.289846]  [<ffffffffc03830a6>] ? drm_helper_probe_single_connector_modes+0x3f6/0x4e0 [drm_kms_helper]
[   44.289883]  [<ffffffffc0246aa7>] ? __ext4_journal_stop+0x37/0x90 [ext4]
[   44.289899]  [<ffffffffc0315954>] ? drm_mode_getconnector+0x324/0x360 [drm]
[   44.289915]  [<ffffffffc03105d1>] ? drm_modeset_unlock_all+0x31/0x60 [drm]
[   44.289928]  [<ffffffffc02fda9a>] ? drm_ioctl+0x1ea/0x470 [drm]
[   44.289943]  [<ffffffffc0315630>] ? drm_mode_connector_property_set_ioctl+0x60/0x60 [drm]
[   44.289947]  [<ffffffff9901600f>] ? do_vfs_ioctl+0x9f/0x600
[   44.289949]  [<ffffffff99001f84>] ? vfs_write+0x154/0x190
[   44.289951]  [<ffffffff990165e4>] ? SyS_ioctl+0x74/0x80
[   44.289954]  [<ffffffff993faebb>] ? system_call_fast_compare_end+0xc/0x9b
[   44.290023] ---[ end trace 619073d806b370e1 ]---
[   54.496089] [drm:drm_atomic_helper_commit_cleanup_done [drm_kms_helper]] *ERROR* [CRTC:26:pipe A] flip_done timed out
[   54.600023] ------------[ cut here ]------------
[   54.600061] WARNING: CPU: 0 PID: 672 at /build/linux-QtSjAP/linux-4.9.13/drivers/gpu/drm/drm_irq.c:1254 drm_wait_one_vblank+0x197/0x1a0 [drm]
[   54.600062] vblank wait timed out on crtc 0
[   54.600063] Modules linked in: ctr ccm appletalk ax25 ipx p8023 p8022 psnap llc snd_hrtimer snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device iTCO_wdt iTCO_vendor_support arc4 uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core hp_wmi videodev sparse_keymap media i915 pcspkr coretemp joydev snd_hda_codec_conexant snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep ath5k evdev ath lpc_ich snd_pcm_oss snd_mixer_oss serio_raw mfd_core mac80211 sg snd_pcm snd_timer cfg80211 rfkill wmi drm_kms_helper shpchp snd soundcore drm video battery ac i2c_algo_bit button acpi_cpufreq tpm_tis tpm_tis_core tpm binfmt_misc ip_tables x_tables autofs4 ext4 crc16 jbd2 crc32c_generic fscrypto ecb glue_helper lrw gf128mul ablk_helper cryptd aes_x86_64 mbcache
[   54.600122]  sr_mod sd_mod cdrom ata_generic ahci libahci ata_piix libata psmouse uhci_hcd ehci_pci ehci_hcd scsi_mod i2c_i801 i2c_smbus 8139too 8139cp mii usbcore usb_common thermal fjes
[   54.600139] CPU: 0 PID: 672 Comm: Xorg Tainted: G        W       4.9.0-2-amd64 #1 Debian 4.9.13-1
[   54.600140] Hardware name: Hewlett-Packard Compaq Presario C700 Notebook PC/30D9, BIOS F.34 09/25/2008
[   54.600142]  0000000000000000 ffffffff99128594 ffffa8cf406739a0 0000000000000000
[   54.600146]  ffffffff98e76dde ffff9cd7b9320000 ffffa8cf406739f8 0000000000000000
[   54.600148]  0000000007000004 ffff9cd7ba332408 ffff9cd7bb33c800 ffffffff98e76e5f
[   54.600151] Call Trace:
[   54.600158]  [<ffffffff99128594>] ? dump_stack+0x5c/0x78
[   54.600162]  [<ffffffff98e76dde>] ? __warn+0xbe/0xe0
[   54.600164]  [<ffffffff98e76e5f>] ? warn_slowpath_fmt+0x5f/0x80
[   54.600167]  [<ffffffff98eb8a6c>] ? finish_wait+0x3c/0x70
[   54.600182]  [<ffffffffc02ff3c7>] ? drm_wait_one_vblank+0x197/0x1a0 [drm]
[   54.600184]  [<ffffffff98eb8c70>] ? prepare_to_wait_event+0xf0/0xf0
[   54.600240]  [<ffffffffc0664da4>] ? intel_get_load_detect_pipe+0x624/0x640 [i915]
[   54.600267]  [<ffffffffc069fd25>] ? intel_tv_detect+0x155/0x550 [i915]
[   54.600281]  [<ffffffffc03830a6>] ? drm_helper_probe_single_connector_modes+0x3f6/0x4e0 [drm_kms_helper]
[   54.600318]  [<ffffffffc0246aa7>] ? __ext4_journal_stop+0x37/0x90 [ext4]
[   54.600334]  [<ffffffffc0315954>] ? drm_mode_getconnector+0x324/0x360 [drm]
[   54.600347]  [<ffffffffc02fda9a>] ? drm_ioctl+0x1ea/0x470 [drm]
[   54.600363]  [<ffffffffc0315630>] ? drm_mode_connector_property_set_ioctl+0x60/0x60 [drm]
[   54.600366]  [<ffffffff9901600f>] ? do_vfs_ioctl+0x9f/0x600
[   54.600369]  [<ffffffff99001f84>] ? vfs_write+0x154/0x190
[   54.600370]  [<ffffffff990165e4>] ? SyS_ioctl+0x74/0x80
[   54.600374]  [<ffffffff993faebb>] ? system_call_fast_compare_end+0xc/0x9b
[   54.600375] ---[ end trace 619073d806b370e2 ]---
[   54.748024] ------------[ cut here ]------------
[   54.748059] WARNING: CPU: 0 PID: 672 at /build/linux-QtSjAP/linux-4.9.13/drivers/gpu/drm/drm_irq.c:1254 drm_wait_one_vblank+0x197/0x1a0 [drm]
[   54.748060] vblank wait timed out on crtc 0
[   54.748061] Modules linked in: ctr ccm appletalk ax25 ipx p8023 p8022 psnap llc snd_hrtimer snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device iTCO_wdt iTCO_vendor_support arc4 uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core hp_wmi videodev sparse_keymap media i915 pcspkr coretemp joydev snd_hda_codec_conexant snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep ath5k evdev ath lpc_ich snd_pcm_oss snd_mixer_oss serio_raw mfd_core mac80211 sg snd_pcm snd_timer cfg80211 rfkill wmi drm_kms_helper shpchp snd soundcore drm video battery ac i2c_algo_bit button acpi_cpufreq tpm_tis tpm_tis_core tpm binfmt_misc ip_tables x_tables autofs4 ext4 crc16 jbd2 crc32c_generic fscrypto ecb glue_helper lrw gf128mul ablk_helper cryptd aes_x86_64 mbcache
[   54.748119]  sr_mod sd_mod cdrom ata_generic ahci libahci ata_piix libata psmouse uhci_hcd ehci_pci ehci_hcd scsi_mod i2c_i801 i2c_smbus 8139too 8139cp mii usbcore usb_common thermal fjes
[   54.748136] CPU: 0 PID: 672 Comm: Xorg Tainted: G        W       4.9.0-2-amd64 #1 Debian 4.9.13-1
[   54.748137] Hardware name: Hewlett-Packard Compaq Presario C700 Notebook PC/30D9, BIOS F.34 09/25/2008
[   54.748140]  0000000000000000 ffffffff99128594 ffffa8cf40673898 0000000000000000
[   54.748143]  ffffffff98e76dde ffff9cd7b9320000 ffffa8cf406738f0 0000000000000000
[   54.748145]  0000000008000004 ffff9cd7ba332408 ffff9cd7b945b9c0 ffffffff98e76e5f
[   54.748148] Call Trace:
[   54.748155]  [<ffffffff99128594>] ? dump_stack+0x5c/0x78
[   54.748159]  [<ffffffff98e76dde>] ? __warn+0xbe/0xe0
[   54.748161]  [<ffffffff98e76e5f>] ? warn_slowpath_fmt+0x5f/0x80
[   54.748164]  [<ffffffff98eb8a6c>] ? finish_wait+0x3c/0x70
[   54.748178]  [<ffffffffc02ff3c7>] ? drm_wait_one_vblank+0x197/0x1a0 [drm]
[   54.748180]  [<ffffffff98eb8c70>] ? prepare_to_wait_event+0xf0/0xf0
[   54.748230]  [<ffffffffc065ea97>] ? intel_pre_plane_update+0x127/0x150 [i915]
[   54.748257]  [<ffffffffc065f0e3>] ? intel_atomic_commit_tail+0x153/0xf50 [i915]
[   54.748260]  [<ffffffff993f846e>] ? mutex_lock+0xe/0x30
[   54.748288]  [<ffffffffc06672ea>] ? intel_prepare_plane_fb+0x14a/0x290 [i915]
[   54.748316]  [<ffffffffc0660235>] ? intel_atomic_commit+0x355/0x4c0 [i915]
[   54.748344]  [<ffffffffc0664e0c>] ? intel_release_load_detect_pipe+0x4c/0x80 [i915]
[   54.748371]  [<ffffffffc069ff59>] ? intel_tv_detect+0x389/0x550 [i915]
[   54.748388]  [<ffffffffc03830a6>] ? drm_helper_probe_single_connector_modes+0x3f6/0x4e0 [drm_kms_helper]
[   54.748424]  [<ffffffffc0246aa7>] ? __ext4_journal_stop+0x37/0x90 [ext4]
[   54.748441]  [<ffffffffc0315954>] ? drm_mode_getconnector+0x324/0x360 [drm]
[   54.748454]  [<ffffffffc02fda9a>] ? drm_ioctl+0x1ea/0x470 [drm]
[   54.748469]  [<ffffffffc0315630>] ? drm_mode_connector_property_set_ioctl+0x60/0x60 [drm]
[   54.748472]  [<ffffffff9901600f>] ? do_vfs_ioctl+0x9f/0x600
[   54.748475]  [<ffffffff99001f84>] ? vfs_write+0x154/0x190
[   54.748477]  [<ffffffff990165e4>] ? SyS_ioctl+0x74/0x80
[   54.748480]  [<ffffffff993faebb>] ? system_call_fast_compare_end+0xc/0x9b
[   54.748481] ---[ end trace 619073d806b370e3 ]---
[    0.000000] Linux version 4.9.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170221 (Debian 6.3.0-8) ) #1 SMP Debian 4.9.13-1 (2017-02-27)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-2-amd64 root=UUID=d5d46d07-3c4f-4549-99cd-af7d4b539315 ro quiet
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f4d1fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f4d2000-0x000000007f4dcfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f4dd000-0x000000007f533fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f534000-0x000000007f536fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f537000-0x000000007f5bafff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f5bb000-0x000000007f5befff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f5bf000-0x000000007f679fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f67a000-0x000000007f6befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f6bf000-0x000000007f6fffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f700000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Hewlett-Packard Compaq Presario C700 Notebook PC/30D9, BIOS F.34 09/25/2008
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f67a max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFFE0000 mask FFFFE0000 write-protect
[    0.000000]   1 base 000000000 mask FC0000000 write-back
[    0.000000]   2 base 040000000 mask FC0000000 write-back
[    0.000000]   3 base 07F800000 mask FFF800000 uncachable
[    0.000000]   4 base 07F700000 mask FFFF00000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000fe270-0x000fe27f] mapped at [ffff8904800fe270]
[    0.000000] Base memory trampoline at [ffff890480099000] 99000 size 24576
[    0.000000] BRK [0x5192b000, 0x5192bfff] PGTABLE
[    0.000000] BRK [0x5192c000, 0x5192cfff] PGTABLE
[    0.000000] BRK [0x5192d000, 0x5192dfff] PGTABLE
[    0.000000] BRK [0x5192e000, 0x5192efff] PGTABLE
[    0.000000] BRK [0x5192f000, 0x5192ffff] PGTABLE
[    0.000000] BRK [0x51930000, 0x51930fff] PGTABLE
[    0.000000] BRK [0x51931000, 0x51931fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35cdb000-0x36e64fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HP    )
[    0.000000] ACPI: XSDT 0x000000007F6FE120 00006C (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 0x000000007F6FD000 0000F4 (v04 HP     SPARTAN  00000001 LOHR 00000000)
[    0.000000] ACPI: DSDT 0x000000007F6F4000 00802F (v01 HP     SPARTAN  00000001 LOHR 00000000)
[    0.000000] ACPI: FACS 0x000000007F67D000 000040
[    0.000000] ACPI: FACS 0x000000007F67D000 000040
[    0.000000] ACPI: APIC 0x000000007F6F3000 000068 (v02 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[    0.000000] ACPI: HPET 0x000000007F6F2000 000038 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[    0.000000] ACPI: MCFG 0x000000007F6F1000 00003C (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[    0.000000] ACPI: ASF! 0x000000007F6F0000 0000A5 (v32 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[    0.000000] ACPI: SLIC 0x000000007F6EF000 000176 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[    0.000000] ACPI: BOOT 0x000000007F6EE000 000028 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[    0.000000] ACPI: SSDT 0x000000007F6ED000 0005D7 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.000000] ACPI: SSDT 0x000000007F6EC000 0004C4 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007f679fff]
[    0.000000] NODE_DATA(0) allocated [mem 0x7f675000-0x7f679fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007f679fff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007f4d1fff]
[    0.000000]   node   0: [mem 0x000000007f4dd000-0x000000007f533fff]
[    0.000000]   node   0: [mem 0x000000007f537000-0x000000007f5bafff]
[    0.000000]   node   0: [mem 0x000000007f5bf000-0x000000007f679fff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f679fff]
[    0.000000] On node 0 totalpages: 521734
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8090 pages used for memmap
[    0.000000]   DMA32 zone: 517736 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000007f800000-0x000000007fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f4d2000-0x7f4dcfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f534000-0x7f536fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f5bb000-0x7f5befff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff8904ff200000 s103384 r8192 d31784 u1048576
[    0.000000] pcpu-alloc: s103384 r8192 d31784 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 513559
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-2-amd64 root=UUID=d5d46d07-3c4f-4549-99cd-af7d4b539315 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2020184K/2086936K available (6142K kernel code, 1129K rwdata, 2844K rodata, 1392K init, 684K bss, 66752K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:33024 nr_irqs:440 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1862.116 MHz processor
[    0.004014] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.23 BogoMIPS (lpj=7448464)
[    0.004018] pid_max: default: 32768 minimum: 301
[    0.004046] ACPI: Core revision 20160831
[    0.012994] ACPI: 3 ACPI AML tables successfully acquired and loaded
[    0.013083] Security Framework initialized
[    0.013085] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.013095] AppArmor: AppArmor disabled by boot time parameter
[    0.013311] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.014652] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.015378] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.015384] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.015941] mce: CPU supports 6 MCE banks
[    0.015953] CPU0: Thermal monitoring enabled (TM1)
[    0.015960] process: using mwait in idle threads
[    0.015967] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.015968] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.028012] ftrace: allocating 24999 entries in 98 pages
[    0.036215] smpboot: Max logical packages: 2
[    0.036697] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.080000] smpboot: CPU0: Intel(R) Celeron(R) CPU          540  @ 1.86GHz (family: 0x6, model: 0x16, stepping: 0x1)
[    0.080000] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[    0.080000] ... version:                2
[    0.080000] ... bit width:              40
[    0.080000] ... generic registers:      2
[    0.080000] ... value mask:             000000ffffffffff
[    0.080000] ... max period:             000000007fffffff
[    0.080000] ... fixed-purpose events:   3
[    0.080000] ... event mask:             0000000700000003
[    0.080000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.080000] x86: Booted up 1 node, 1 CPUs
[    0.080000] smpboot: Total of 1 processors activated (3724.23 BogoMIPS)
[    0.080000] devtmpfs: initialized
[    0.080000] x86/mm: Memory block size: 128MB
[    0.081996] PM: Registering ACPI NVS region [mem 0x7f67a000-0x7f6befff] (282624 bytes)
[    0.082072] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.082083] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.082136] pinctrl core: initialized pinctrl subsystem
[    0.082308] NET: Registered protocol family 16
[    0.082588] cpuidle: using governor ladder
[    0.082590] cpuidle: using governor menu
[    0.082614] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    0.082615] Simple Boot Flag at 0x44 set to 0x1
[    0.082628] ACPI: bus type PCI registered
[    0.082630] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.082730] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.082733] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.082747] PCI: Using configuration type 1 for base access
[    0.084034] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.084360] ACPI: Added _OSI(Module Device)
[    0.084362] ACPI: Added _OSI(Processor Device)
[    0.084363] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.084364] ACPI: Added _OSI(Processor Aggregator Device)
[    0.084613] ACPI: Executed 1 blocks of module-level executable AML code
[    0.086473] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.088624] ACPI : EC: EC started
[    0.224036] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as first EC
[    0.224039] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.224041] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as boot DSDT EC to handle transactions
[    0.224042] ACPI: Interpreter enabled
[    0.224068] ACPI: (supports S0 S3 S4 S5)
[    0.224070] ACPI: Using IOAPIC for interrupt routing
[    0.224107] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.403476] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.492543] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.492550] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.492556] ACPI BIOS Error (bug): \_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20160831/nsarguments-189)
[    0.492784] acpi PNP0A08:00: _OSC failed (AE_TYPE); disabling ASPM
[    0.493354] PCI host bridge to bus 0000:00
[    0.493357] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.493359] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.493361] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.493363] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.493365] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.493377] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[    0.493520] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
[    0.493535] pci 0000:00:02.0: reg 0x10: [mem 0x91000000-0x910fffff 64bit]
[    0.493545] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.493551] pci 0000:00:02.0: reg 0x20: [io  0x30d0-0x30d7]
[    0.493680] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
[    0.493693] pci 0000:00:02.1: reg 0x10: [mem 0x91100000-0x911fffff 64bit]
[    0.493878] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[    0.493905] pci 0000:00:1b.0: reg 0x10: [mem 0x92400000-0x92403fff 64bit]
[    0.494027] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.494150] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[    0.494272] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.494337] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.494408] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[    0.494469] pci 0000:00:1d.0: reg 0x20: [io  0x3080-0x309f]
[    0.494605] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[    0.494666] pci 0000:00:1d.1: reg 0x20: [io  0x3060-0x307f]
[    0.494796] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[    0.494858] pci 0000:00:1d.2: reg 0x20: [io  0x3040-0x305f]
[    0.495000] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[    0.495023] pci 0000:00:1d.7: reg 0x10: [mem 0x92404800-0x92404bff]
[    0.495136] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.495249] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.495378] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.495443] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[    0.495566] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[    0.495572] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
[    0.495578] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003)
[    0.495715] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[    0.495734] pci 0000:00:1f.1: reg 0x10: [io  0x30c8-0x30cf]
[    0.495746] pci 0000:00:1f.1: reg 0x14: [io  0x30e4-0x30e7]
[    0.495759] pci 0000:00:1f.1: reg 0x18: [io  0x30c0-0x30c7]
[    0.495772] pci 0000:00:1f.1: reg 0x1c: [io  0x30e0-0x30e3]
[    0.495784] pci 0000:00:1f.1: reg 0x20: [io  0x30a0-0x30af]
[    0.495812] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.495814] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.495816] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.495817] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.495928] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[    0.495952] pci 0000:00:1f.2: reg 0x10: [io  0x30b8-0x30bf]
[    0.495965] pci 0000:00:1f.2: reg 0x14: [io  0x30dc-0x30df]
[    0.495978] pci 0000:00:1f.2: reg 0x18: [io  0x30b0-0x30b7]
[    0.495990] pci 0000:00:1f.2: reg 0x1c: [io  0x30d8-0x30db]
[    0.496009] pci 0000:00:1f.2: reg 0x20: [io  0x3020-0x303f]
[    0.496021] pci 0000:00:1f.2: reg 0x24: [mem 0x92404000-0x924047ff]
[    0.496090] pci 0000:00:1f.2: PME# supported from D3hot
[    0.496201] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[    0.496219] pci 0000:00:1f.3: reg 0x10: [mem 0x92404c00-0x92404cff]
[    0.496265] pci 0000:00:1f.3: reg 0x20: [io  0x3000-0x301f]
[    0.496490] pci 0000:01:00.0: [168c:001c] type 00 class 0x020000
[    0.496527] pci 0000:01:00.0: reg 0x10: [mem 0x91300000-0x9130ffff 64bit]
[    0.496801] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.496814] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.496820] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.496824] pci 0000:00:1c.0:   bridge window [mem 0x91300000-0x923fffff]
[    0.496832] pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[    0.496901] pci 0000:02:01.0: [10ec:8139] type 00 class 0x020000
[    0.496927] pci 0000:02:01.0: reg 0x10: [io  0x1000-0x10ff]
[    0.496942] pci 0000:02:01.0: reg 0x14: [mem 0x91200000-0x912000ff]
[    0.497053] pci 0000:02:01.0: supports D1 D2
[    0.497055] pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
[    0.497175] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[    0.497180] pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
[    0.497185] pci 0000:00:1e.0:   bridge window [mem 0x91200000-0x912fffff]
[    0.497193] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.497195] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.497198] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.497200] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[    0.497312] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.497407] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[    0.497497] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.497587] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.497677] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[    0.497766] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[    0.497855] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[    0.497944] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[    0.498566] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.498726] ACPI : EC: event unblocked
[    0.498736] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.498738] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.498916] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.498917] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.498922] vgaarb: loaded
[    0.498923] vgaarb: bridge control possible 0000:00:02.0
[    0.499072] PCI: Using ACPI for IRQ routing
[    0.510992] PCI: pci_cache_line_size set to 64 bytes
[    0.511058] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.511060] e820: reserve RAM buffer [mem 0x7f4d2000-0x7fffffff]
[    0.511062] e820: reserve RAM buffer [mem 0x7f534000-0x7fffffff]
[    0.511063] e820: reserve RAM buffer [mem 0x7f5bb000-0x7fffffff]
[    0.511065] e820: reserve RAM buffer [mem 0x7f67a000-0x7fffffff]
[    0.511301] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.511307] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.511311] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.513038] clocksource: Switched to clocksource hpet
[    0.523511] VFS: Disk quotas dquot_6.6.0
[    0.523557] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.523718] pnp: PnP ACPI init
[    0.596270] pnp 00:00: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1e.0 BAR 13 [io  0x1000-0x1fff]
[    0.596343] system 00:00: [io  0x0600-0x060f] has been reserved
[    0.596345] system 00:00: [io  0x0610] has been reserved
[    0.596347] system 00:00: [io  0x0800-0x080f] has been reserved
[    0.596350] system 00:00: [io  0x0810-0x0817] has been reserved
[    0.596352] system 00:00: [io  0x0400-0x047f] has been reserved
[    0.596354] system 00:00: [io  0x0500-0x053f] has been reserved
[    0.596356] system 00:00: [io  0xff2c-0xff2f] has been reserved
[    0.596360] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.596362] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.596364] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.596366] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.596368] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.596371] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.596373] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.596378] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.596442] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.596536] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.596588] pnp 00:03: Plug and Play ACPI device, IDs AUI0214 PNP0f13 (active)
[    0.596680] pnp: PnP ACPI: found 4 devices
[    0.603627] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.603670] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.603674] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.603680] pci 0000:00:1c.0:   bridge window [mem 0x91300000-0x923fffff]
[    0.603685] pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[    0.603694] pci 0000:00:1e.0: PCI bridge to [bus 02]
[    0.603697] pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
[    0.603703] pci 0000:00:1e.0:   bridge window [mem 0x91200000-0x912fffff]
[    0.603716] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.603718] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.603720] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.603722] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[    0.603724] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.603726] pci_bus 0000:01: resource 1 [mem 0x91300000-0x923fffff]
[    0.603728] pci_bus 0000:01: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
[    0.603730] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    0.603731] pci_bus 0000:02: resource 1 [mem 0x91200000-0x912fffff]
[    0.603733] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7 window]
[    0.603735] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff window]
[    0.603737] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.603739] pci_bus 0000:02: resource 7 [mem 0x80000000-0xfebfffff window]
[    0.603865] NET: Registered protocol family 2
[    0.604138] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.604224] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.604346] TCP: Hash tables configured (established 16384 bind 16384)
[    0.604422] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.604439] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.604534] NET: Registered protocol family 1
[    0.604562] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.606106] PCI: CLS 0 bytes, default 64
[    0.606204] Unpacking initramfs...
[    1.077177] Freeing initrd memory: 17960K (ffff8904b5cdb000 - ffff8904b6e65000)
[    1.077855] audit: initializing netlink subsys (disabled)
[    1.077895] audit: type=2000 audit(1489794877.076:1): initialized
[    1.078328] Initialise system trusted keyrings
[    1.078473] workingset: timestamp_bits=40 max_order=19 bucket_order=0
[    1.078494] zbud: loaded
[    1.153866] Key type asymmetric registered
[    1.153869] Asymmetric key parser 'x509' registered
[    1.153904] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.153944] io scheduler noop registered
[    1.153945] io scheduler deadline registered
[    1.153960] io scheduler cfq registered (default)
[    1.154449] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.154458] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.154484] intel_idle: does not run on family 6 model 22
[    1.154638] Monitor-Mwait will be used to enter C-1 state
[    1.154645] Monitor-Mwait will be used to enter C-2 state
[    1.154650] Monitor-Mwait will be used to enter C-3 state
[    1.154653] tsc: Marking TSC unstable due to TSC halts in idle
[    1.154798] GHES: HEST is not enabled!
[    1.154891] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.155454] Linux agpgart interface v0.103
[    1.155532] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.155533] AMD IOMMUv2 functionality not available on this system
[    1.155685] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    1.191704] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.191711] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.191907] mousedev: PS/2 mouse device common for all mice
[    1.194205] rtc_cmos 00:01: RTC can wake from S4
[    1.194384] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.194419] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.194442] ledtrig-cpu: registered to indicate activity on CPUs
[    1.194804] NET: Registered protocol family 10
[    1.195119] mip6: Mobile IPv6
[    1.195122] NET: Registered protocol family 17
[    1.195125] mpls_gso: MPLS GSO support
[    1.195312] microcode: sig=0x10661, pf=0x80, revision=0x16
[    1.195355] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.195515] registered taskstats version 1
[    1.195518] Loading compiled-in X.509 certificates
[    1.197596] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    1.198044] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    1.198076] zswap: loaded using pool lzo/zbud
[    1.198484] rtc_cmos 00:01: setting system clock to 2017-03-17 23:54:37 UTC (1489794877)
[    1.198571] PM: Hibernation image not present or could not be loaded.
[    1.200669] Freeing unused kernel memory: 1392K (ffffffffbc71c000 - ffffffffbc878000)
[    1.200673] Write protecting the kernel read-only data: 12288k
[    1.202375] Freeing unused kernel memory: 2032K (ffff8904d1004000 - ffff8904d1200000)
[    1.207037] Freeing unused kernel memory: 1252K (ffff8904d14c7000 - ffff8904d1600000)
[    1.215021] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.227365] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.243763] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.243822] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.244524] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.244637] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.244651] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.247128] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.247233] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.247258] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.247745] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.247834] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.303302] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    1.342606] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.342612] 8139cp 0000:02:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    1.359203] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.361004] ACPI: bus type USB registered
[    1.361286] usbcore: registered new interface driver usbfs
[    1.361301] usbcore: registered new interface driver hub
[    1.361328] usbcore: registered new device driver usb
[    1.366250] 8139too: 8139too Fast Ethernet driver 0.9.28
[    1.367018] 8139too 0000:02:01.0 eth0: RealTek RTL8139 at 0xfffface88033d000, 00:1b:38:f5:af:69, IRQ 16
[    1.383330] SCSI subsystem initialized
[    1.388617] thermal LNXTHERM:00: registered as thermal_zone0
[    1.388619] ACPI: Thermal Zone [TZ01] (82 C)
[    1.389793] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.390678] ehci-pci: EHCI PCI platform driver
[    1.390954] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.390964] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.390983] ehci-pci 0000:00:1d.7: debug port 1
[    1.394887] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.402885] uhci_hcd: USB Universal Host Controller Interface driver
[    1.415451] ehci-pci 0000:00:1d.7: irq 23, io mem 0x92404800
[    1.428039] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.428178] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.428180] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.428182] usb usb1: Product: EHCI Host Controller
[    1.428184] usb usb1: Manufacturer: Linux 4.9.0-2-amd64 ehci_hcd
[    1.428185] usb usb1: SerialNumber: 0000:00:1d.7
[    1.428382] hub 1-0:1.0: USB hub found
[    1.428393] hub 1-0:1.0: 6 ports detected
[    1.428990] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.428999] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.429011] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.429047] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00003080
[    1.429130] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.429133] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.429135] usb usb2: Product: UHCI Host Controller
[    1.429136] usb usb2: Manufacturer: Linux 4.9.0-2-amd64 uhci_hcd
[    1.429138] usb usb2: SerialNumber: 0000:00:1d.0
[    1.429310] hub 2-0:1.0: USB hub found
[    1.429320] hub 2-0:1.0: 2 ports detected
[    1.429637] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.429644] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.429653] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.429687] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00003060
[    1.429760] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.429762] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.429764] usb usb3: Product: UHCI Host Controller
[    1.429765] usb usb3: Manufacturer: Linux 4.9.0-2-amd64 uhci_hcd
[    1.429767] usb usb3: SerialNumber: 0000:00:1d.1
[    1.429930] hub 3-0:1.0: USB hub found
[    1.429939] hub 3-0:1.0: 2 ports detected
[    1.430228] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.430235] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.430245] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.430270] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00003040
[    1.430336] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.430338] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.430340] usb usb4: Product: UHCI Host Controller
[    1.430342] usb usb4: Manufacturer: Linux 4.9.0-2-amd64 uhci_hcd
[    1.430344] usb usb4: SerialNumber: 0000:00:1d.2
[    1.430508] hub 4-0:1.0: USB hub found
[    1.430516] hub 4-0:1.0: 2 ports detected
[    1.447978] libata version 3.00 loaded.
[    1.451375] ahci 0000:00:1f.2: version 3.0
[    1.451702] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.451731] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
[    1.451733] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems 
[    1.470013] scsi host0: ahci
[    1.484043] scsi host1: ahci
[    1.492830] scsi host2: ahci
[    1.492949] ata1: SATA max UDMA/133 abar m2048@0x92404000 port 0x92404100 irq 25
[    1.492951] ata2: DUMMY
[    1.492952] ata3: DUMMY
[    1.493024] ata_piix 0000:00:1f.1: version 2.13
[    1.498561] scsi host3: ata_piix
[    1.498895] scsi host4: ata_piix
[    1.498979] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30a0 irq 14
[    1.498981] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30a8 irq 15
[    1.688419] ata4.00: ATAPI: TSSTcorp CDDVDW TS-L632H, HS02, max MWDMA2
[    1.712287] ata4.00: configured for MWDMA2
[    1.756061] usb 1-6: new high-speed USB device number 2 using ehci-pci
[    1.924130] usb 1-6: New USB device found, idVendor=04f2, idProduct=b057
[    1.924132] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    1.924134] usb 1-6: Product: CNF7041
[    1.924136] usb 1-6: Manufacturer: Chicony Electronics Co., Ltd.
[    1.924137] usb 1-6: SerialNumber: SN0001
[    1.964080] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.964631] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.964635] ata1.00: ATA-8: FUJITSU MHY2120BH, 890B, max UDMA/100
[    1.964637] ata1.00: 234441648 sectors, multi 16: LBA48 
[    1.965231] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.965235] ata1.00: configured for UDMA/100
[    1.965490] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHY2120B 890B PQ: 0 ANSI: 5
[    1.969549] scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L632H  HS02 PQ: 0 ANSI: 5
[    1.995777] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    1.995841] sd 0:0:0:0: [sda] Write Protect is off
[    1.995844] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.995872] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.017852] sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.017856] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.018401] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    2.043241]  sda: sda1 sda2 < sda5 >
[    2.044196] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.064336] random: fast init done
[    2.080031] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x35aec133ecc, max_idle_ns: 881590677622 ns
[    2.455985] PM: Starting manual resume from disk
[    2.455991] PM: Hibernation image partition 8:5 present
[    2.455992] PM: Looking for hibernation image.
[    2.456356] PM: Image not found (code -22)
[    2.456357] PM: Hibernation image not present or could not be loaded.
[    2.906537] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2
[    2.981234] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.535994] random: crng init done
[    4.609456] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.755500] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    4.755669] systemd[1]: Detected architecture x86-64.
[    4.769100] systemd[1]: Set hostname to <cax>.
[    6.110058] systemd[1]: Created slice User and Session Slice.
[    6.110225] systemd[1]: Listening on RPCbind Server Activation Socket.
[    6.110316] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.110398] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.110474] systemd[1]: Listening on udev Control Socket.
[    6.110615] systemd[1]: Listening on Journal Audit Socket.
[    6.110674] systemd[1]: Listening on fsck to fsckd communication Socket.
[    6.897330] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    7.165678] systemd-journald[163]: Received request to flush runtime journal from PID 1
[    9.648803] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    9.648810] ACPI: Power Button [PWRB]
[    9.648936] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[    9.648957] ACPI: Lid Switch [LID0]
[    9.649023] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[    9.649026] ACPI: Sleep Button [SLPB]
[    9.649113] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    9.649116] ACPI: Power Button [PWRF]
[    9.856221] ACPI: AC Adapter [AC] (on-line)
[   10.155260] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.208049] ACPI: Battery Slot [BAT0] (battery absent)
[   10.235596] [drm] Initialized
[   10.452382] wmi: Mapper loaded
[   10.540991] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20160831/utaddress-247)
[   10.541000] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000043B (\_SB.PCI0.LPC.PMA1) (20160831/utaddress-247)
[   10.541005] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.541009] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000052D (\GPIO) (20160831/utaddress-247)
[   10.541013] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.541051] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.744680] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   10.758884] snd_hda_codec_conexant hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing.
[   10.759403] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20561 (Hermosa): line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[   10.759405] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.759408] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[   10.759409] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[   10.759411] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[   10.759413] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x1d
[   10.759415] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x18
[   10.761795] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[   10.767678] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   10.767965] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   10.768044] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   10.937328] media: Linux media interface: v0.10
[   10.947499] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   10.947565] sr 3:0:0:0: Attached scsi generic sg1 type 5
[   10.990201] Linux video capture interface: v2.00
[   11.327560] intel_powerclamp: No package C-state available
[   11.432484] input: HP WMI hotkeys as /devices/virtual/input/input11
[   11.516729] pci 0000:00:00.0: Intel 965GM Chipset
[   11.516754] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[   11.516910] pci 0000:00:00.0: detected 8192K stolen memory
[   11.516941] [drm] Memory usable by graphics device = 512M
[   11.516945] [drm] Replacing VGA console driver
[   11.518198] Console: switching to colour dummy device 80x25
[   11.525159] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   11.525161] [drm] Driver supports precise vblank timestamp query.
[   11.527546] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   11.540650] iTCO_vendor_support: vendor-support=0
[   11.568145] [drm] RC6 disabled, disabling runtime PM support
[   11.568158] [drm] initialized overlay support
[   11.568890] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[   11.569610] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[   11.576443] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[   11.590259] acpi device:15: registered as cooling_device1
[   11.590362] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[   11.591102] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[   11.773190] uvcvideo: Found UVC 1.00 device CNF7041 (04f2:b057)
[   11.777101] uvcvideo 1-6:1.0: Entity type for entity Extension 5 was not initialized!
[   11.777105] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
[   11.777108] uvcvideo 1-6:1.0: Entity type for entity Processing 3 was not initialized!
[   11.777110] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
[   11.777626] input: CNF7041 as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input13
[   11.778087] usbcore: registered new interface driver uvcvideo
[   11.778088] USB Video Class driver (1.1.1)
[   11.807424] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   11.807497] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
[   11.808288] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   12.049786] ath5k 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[   12.049990] ath5k 0000:01:00.0: registered as 'phy0'
[   12.582041] ath: EEPROM regdomain: 0x67
[   12.582043] ath: EEPROM indicates we should expect a direct regpair map
[   12.582046] ath: Country alpha2 being used: 00
[   12.582047] ath: Regpair used: 0x67
[   12.624940] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   12.625368] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   13.812184] Adding 4172796k swap on /dev/sda5.  Priority:-1 extents:1 across:4172796k FS
[   16.538042] systemd[1]: apt-daily.timer: Adding 4h 32min 55.684266s random time.
[   21.728055] [drm:drm_atomic_helper_commit_cleanup_done [drm_kms_helper]] *ERROR* [CRTC:26:pipe A] flip_done timed out
[   21.832018] ------------[ cut here ]------------
[   21.832060] WARNING: CPU: 0 PID: 92 at /build/linux-QtSjAP/linux-4.9.13/drivers/gpu/drm/drm_irq.c:1254 drm_wait_one_vblank+0x197/0x1a0 [drm]
[   21.832061] vblank wait timed out on crtc 0
[   21.832062] Modules linked in: arc4 ath5k iTCO_wdt uvcvideo iTCO_vendor_support i915 ath mac80211 hp_wmi videobuf2_vmalloc videobuf2_memops sparse_keymap videobuf2_v4l2 joydev evdev coretemp videobuf2_core cfg80211 serio_raw videodev sg media rfkill snd_hda_codec_conexant pcspkr snd_hda_codec_generic snd_hda_intel lpc_ich snd_hda_codec mfd_core snd_hda_core wmi snd_hwdep snd_pcm_oss drm_kms_helper drm shpchp battery snd_mixer_oss snd_pcm video snd_timer snd soundcore i2c_algo_bit ac button acpi_cpufreq tpm_tis tpm_tis_core tpm binfmt_misc ip_tables x_tables autofs4 ext4 crc16 jbd2 crc32c_generic fscrypto ecb glue_helper lrw gf128mul ablk_helper cryptd aes_x86_64 mbcache sr_mod cdrom sd_mod ata_generic ata_piix ahci libahci libata uhci_hcd ehci_pci scsi_mod psmouse 8139too ehci_hcd i2c_i801 i2c_smbus
[   21.832119]  8139cp mii usbcore usb_common thermal fjes
[   21.832127] CPU: 0 PID: 92 Comm: kworker/u4:3 Not tainted 4.9.0-2-amd64 #1 Debian 4.9.13-1
[   21.832128] Hardware name: Hewlett-Packard Compaq Presario C700 Notebook PC/30D9, BIOS F.34 09/25/2008
[   21.832134] Workqueue: events_unbound async_run_entry_fn
[   21.832136]  0000000000000000 ffffffffbbd28594 fffface880583a60 0000000000000000
[   21.832140]  ffffffffbba76dde ffff8904fa3b0000 fffface880583ab8 0000000000000000
[   21.832142]  0000000001000001 ffff8904fc6de808 ffff8904f8a5d000 ffffffffbba76e5f
[   21.832145] Call Trace:
[   21.832151]  [<ffffffffbbd28594>] ? dump_stack+0x5c/0x78
[   21.832155]  [<ffffffffbba76dde>] ? __warn+0xbe/0xe0
[   21.832157]  [<ffffffffbba76e5f>] ? warn_slowpath_fmt+0x5f/0x80
[   21.832160]  [<ffffffffbbab8a6c>] ? finish_wait+0x3c/0x70
[   21.832174]  [<ffffffffc07123c7>] ? drm_wait_one_vblank+0x197/0x1a0 [drm]
[   21.832176]  [<ffffffffbbab8c70>] ? prepare_to_wait_event+0xf0/0xf0
[   21.832246]  [<ffffffffc0a54da4>] ? intel_get_load_detect_pipe+0x624/0x640 [i915]
[   21.832285]  [<ffffffffc0a8fd25>] ? intel_tv_detect+0x155/0x550 [i915]
[   21.832300]  [<ffffffffc0729bf8>] ? drm_property_replace_global_blob+0xd8/0x120 [drm]
[   21.832319]  [<ffffffffc07870a6>] ? drm_helper_probe_single_connector_modes+0x3f6/0x4e0 [drm_kms_helper]
[   21.832326]  [<ffffffffc079533c>] ? drm_fb_helper_initial_config+0xac/0x440 [drm_kms_helper]
[   21.832365]  [<ffffffffc0a6ad34>] ? intel_fbdev_initial_config+0x14/0x30 [i915]
[   21.832367]  [<ffffffffbba99414>] ? async_run_entry_fn+0x34/0x140
[   21.832369]  [<ffffffffbba902d4>] ? process_one_work+0x184/0x410
[   21.832371]  [<ffffffffbba905ad>] ? worker_thread+0x4d/0x480
[   21.832372]  [<ffffffffbba90560>] ? process_one_work+0x410/0x410
[   21.832374]  [<ffffffffbba9651e>] ? kthread+0xce/0xf0
[   21.832377]  [<ffffffffbba24701>] ? __switch_to+0x2c1/0x6c0
[   21.832379]  [<ffffffffbba96450>] ? kthread_park+0x60/0x60
[   21.832383]  [<ffffffffbbffb135>] ? ret_from_fork+0x25/0x30
[   21.832384] ---[ end trace e000311e5910c9cf ]---
[   21.974151] ------------[ cut here ]------------
[   21.974197] WARNING: CPU: 0 PID: 92 at /build/linux-QtSjAP/linux-4.9.13/drivers/gpu/drm/drm_irq.c:1254 drm_wait_one_vblank+0x197/0x1a0 [drm]
[   21.974199] vblank wait timed out on crtc 0
[   21.974199] Modules linked in: arc4 ath5k iTCO_wdt uvcvideo iTCO_vendor_support i915 ath mac80211 hp_wmi videobuf2_vmalloc videobuf2_memops sparse_keymap videobuf2_v4l2 joydev evdev coretemp videobuf2_core cfg80211 serio_raw videodev sg media rfkill snd_hda_codec_conexant pcspkr snd_hda_codec_generic snd_hda_intel lpc_ich snd_hda_codec mfd_core snd_hda_core wmi snd_hwdep snd_pcm_oss drm_kms_helper drm shpchp battery snd_mixer_oss snd_pcm video snd_timer snd soundcore i2c_algo_bit ac button acpi_cpufreq tpm_tis tpm_tis_core tpm binfmt_misc ip_tables x_tables autofs4 ext4 crc16 jbd2 crc32c_generic fscrypto ecb glue_helper lrw gf128mul ablk_helper cryptd aes_x86_64 mbcache sr_mod cdrom sd_mod ata_generic ata_piix ahci libahci libata uhci_hcd ehci_pci scsi_mod psmouse 8139too ehci_hcd i2c_i801 i2c_smbus
[   21.974257]  8139cp mii usbcore usb_common thermal fjes
[   21.974264] CPU: 0 PID: 92 Comm: kworker/u4:3 Tainted: G        W       4.9.0-2-amd64 #1 Debian 4.9.13-1
[   21.974266] Hardware name: Hewlett-Packard Compaq Presario C700 Notebook PC/30D9, BIOS F.34 09/25/2008
[   21.974271] Workqueue: events_unbound async_run_entry_fn
[   21.974273]  0000000000000000 ffffffffbbd28594 fffface880583958 0000000000000000
[   21.974277]  ffffffffbba76dde ffff8904fa3b0000 fffface8805839b0 0000000000000000
[   21.974279]  0000000002000001 ffff8904fc6de808 ffff8904f8a4f480 ffffffffbba76e5f
[   21.974282] Call Trace:
[   21.974288]  [<ffffffffbbd28594>] ? dump_stack+0x5c/0x78
[   21.974292]  [<ffffffffbba76dde>] ? __warn+0xbe/0xe0
[   21.974294]  [<ffffffffbba76e5f>] ? warn_slowpath_fmt+0x5f/0x80
[   21.974297]  [<ffffffffbbab8a6c>] ? finish_wait+0x3c/0x70
[   21.974311]  [<ffffffffc07123c7>] ? drm_wait_one_vblank+0x197/0x1a0 [drm]
[   21.974314]  [<ffffffffbbab8c70>] ? prepare_to_wait_event+0xf0/0xf0
[   21.974390]  [<ffffffffc0a4ea97>] ? intel_pre_plane_update+0x127/0x150 [i915]
[   21.974429]  [<ffffffffc0a4f0e3>] ? intel_atomic_commit_tail+0x153/0xf50 [i915]
[   21.974432]  [<ffffffffbbff846e>] ? mutex_lock+0xe/0x30
[   21.974471]  [<ffffffffc0a572ea>] ? intel_prepare_plane_fb+0x14a/0x290 [i915]
[   21.974510]  [<ffffffffc0a50235>] ? intel_atomic_commit+0x355/0x4c0 [i915]
[   21.974549]  [<ffffffffc0a54e0c>] ? intel_release_load_detect_pipe+0x4c/0x80 [i915]
[   21.974587]  [<ffffffffc0a8ff59>] ? intel_tv_detect+0x389/0x550 [i915]
[   21.974603]  [<ffffffffc0729bf8>] ? drm_property_replace_global_blob+0xd8/0x120 [drm]
[   21.974622]  [<ffffffffc07870a6>] ? drm_helper_probe_single_connector_modes+0x3f6/0x4e0 [drm_kms_helper]
[   21.974630]  [<ffffffffc079533c>] ? drm_fb_helper_initial_config+0xac/0x440 [drm_kms_helper]
[   21.974668]  [<ffffffffc0a6ad34>] ? intel_fbdev_initial_config+0x14/0x30 [i915]
[   21.974670]  [<ffffffffbba99414>] ? async_run_entry_fn+0x34/0x140
[   21.974672]  [<ffffffffbba902d4>] ? process_one_work+0x184/0x410
[   21.974674]  [<ffffffffbba905ad>] ? worker_thread+0x4d/0x480
[   21.974675]  [<ffffffffbba90560>] ? process_one_work+0x410/0x410
[   21.974678]  [<ffffffffbba9651e>] ? kthread+0xce/0xf0
[   21.974680]  [<ffffffffbba24701>] ? __switch_to+0x2c1/0x6c0
[   21.974683]  [<ffffffffbba96450>] ? kthread_park+0x60/0x60
[   21.974685]  [<ffffffffbbffb135>] ? ret_from_fork+0x25/0x30
[   21.974686] ---[ end trace e000311e5910c9d0 ]---
[   22.034475] fbcon: inteldrmfb (fb0) is primary device
[   22.783784] Console: switching to colour frame buffer device 160x50
[   22.802824] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   23.787004] NET: Registered protocol family 4
[   23.803575] NET: Registered protocol family 3
[   23.809474] NET: Registered protocol family 5
[   23.887675] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   29.032521] 8139too 0000:02:01.0 eth0: link down
[   29.032638] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   32.784089] systemd[1]: apt-daily.timer: Adding 5h 40min 32.253742s random time.
[   33.072926] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   33.276373] systemd[1]: apt-daily.timer: Adding 9h 23min 21.560423s random time.
[   33.347697] 8139too 0000:02:01.0 eth0: link down
[   33.347810] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   33.459075] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   36.757414] wlan0: authenticate with d4:63:fe:12:8b:7e
[   36.765149] wlan0: send auth to d4:63:fe:12:8b:7e (try 1/3)
[   36.767232] wlan0: authenticated
[   36.768371] wlan0: associate with d4:63:fe:12:8b:7e (try 1/3)
[   36.771738] wlan0: RX AssocResp from d4:63:fe:12:8b:7e (capab=0x411 status=0 aid=2)
[   36.771841] wlan0: associated
[   36.771854] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   36.780175] ath: EEPROM regdomain: 0x82d4
[   36.780177] ath: EEPROM indicates we should expect a country code
[   36.780179] ath: doing EEPROM country->regdmn map search
[   36.780180] ath: country maps to regdmn code: 0x37
[   36.780181] ath: Country alpha2 being used: ES
[   36.780181] ath: Regpair used: 0x37
[   36.780183] ath: regdomain 0x82d4 dynamically updated by country IE
[   38.123261] systemd[1]: apt-daily.timer: Adding 11h 9min 20.572055s random time.
[    0.000000] Linux version 4.9.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170221 (Debian 6.3.0-8) ) #1 SMP Debian 4.9.13-1 (2017-02-27)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-2-amd64 root=UUID=d5d46d07-3c4f-4549-99cd-af7d4b539315 ro quiet
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f4d1fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f4d2000-0x000000007f4dcfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f4dd000-0x000000007f533fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f534000-0x000000007f536fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f537000-0x000000007f5bafff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f5bb000-0x000000007f5befff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f5bf000-0x000000007f679fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f67a000-0x000000007f6befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f6bf000-0x000000007f6fffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f700000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Hewlett-Packard Compaq Presario C700 Notebook PC/30D9, BIOS F.34 09/25/2008
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f67a max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFFE0000 mask FFFFE0000 write-protect
[    0.000000]   1 base 000000000 mask FC0000000 write-back
[    0.000000]   2 base 040000000 mask FC0000000 write-back
[    0.000000]   3 base 07F800000 mask FFF800000 uncachable
[    0.000000]   4 base 07F700000 mask FFFF00000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000fe270-0x000fe27f] mapped at [ffff9466000fe270]
[    0.000000] Base memory trampoline at [ffff946600099000] 99000 size 24576
[    0.000000] BRK [0x49b2b000, 0x49b2bfff] PGTABLE
[    0.000000] BRK [0x49b2c000, 0x49b2cfff] PGTABLE
[    0.000000] BRK [0x49b2d000, 0x49b2dfff] PGTABLE
[    0.000000] BRK [0x49b2e000, 0x49b2efff] PGTABLE
[    0.000000] BRK [0x49b2f000, 0x49b2ffff] PGTABLE
[    0.000000] BRK [0x49b30000, 0x49b30fff] PGTABLE
[    0.000000] BRK [0x49b31000, 0x49b31fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35cdb000-0x36e64fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HP    )
[    0.000000] ACPI: XSDT 0x000000007F6FE120 00006C (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 0x000000007F6FD000 0000F4 (v04 HP     SPARTAN  00000001 LOHR 00000000)
[    0.000000] ACPI: DSDT 0x000000007F6F4000 00802F (v01 HP     SPARTAN  00000001 LOHR 00000000)
[    0.000000] ACPI: FACS 0x000000007F67D000 000040
[    0.000000] ACPI: FACS 0x000000007F67D000 000040
[    0.000000] ACPI: APIC 0x000000007F6F3000 000068 (v02 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[    0.000000] ACPI: HPET 0x000000007F6F2000 000038 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[    0.000000] ACPI: MCFG 0x000000007F6F1000 00003C (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[    0.000000] ACPI: ASF! 0x000000007F6F0000 0000A5 (v32 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[    0.000000] ACPI: SLIC 0x000000007F6EF000 000176 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[    0.000000] ACPI: BOOT 0x000000007F6EE000 000028 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[    0.000000] ACPI: SSDT 0x000000007F6ED000 0005D7 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.000000] ACPI: SSDT 0x000000007F6EC000 0004C4 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007f679fff]
[    0.000000] NODE_DATA(0) allocated [mem 0x7f675000-0x7f679fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007f679fff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007f4d1fff]
[    0.000000]   node   0: [mem 0x000000007f4dd000-0x000000007f533fff]
[    0.000000]   node   0: [mem 0x000000007f537000-0x000000007f5bafff]
[    0.000000]   node   0: [mem 0x000000007f5bf000-0x000000007f679fff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f679fff]
[    0.000000] On node 0 totalpages: 521734
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8090 pages used for memmap
[    0.000000]   DMA32 zone: 517736 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000007f800000-0x000000007fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f4d2000-0x7f4dcfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f534000-0x7f536fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f5bb000-0x7f5befff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff94667f200000 s103384 r8192 d31784 u1048576
[    0.000000] pcpu-alloc: s103384 r8192 d31784 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 513559
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-2-amd64 root=UUID=d5d46d07-3c4f-4549-99cd-af7d4b539315 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2020184K/2086936K available (6142K kernel code, 1129K rwdata, 2844K rodata, 1392K init, 684K bss, 66752K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:33024 nr_irqs:440 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1862.149 MHz processor
[    0.004014] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.29 BogoMIPS (lpj=7448596)
[    0.004018] pid_max: default: 32768 minimum: 301
[    0.004047] ACPI: Core revision 20160831
[    0.013423] ACPI: 3 ACPI AML tables successfully acquired and loaded
[    0.013511] Security Framework initialized
[    0.013514] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.013523] AppArmor: AppArmor disabled by boot time parameter
[    0.013743] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.015083] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.015803] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.015810] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.016392] mce: CPU supports 6 MCE banks
[    0.016404] CPU0: Thermal monitoring enabled (TM1)
[    0.016410] process: using mwait in idle threads
[    0.016417] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.016418] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.028011] ftrace: allocating 24999 entries in 98 pages
[    0.040219] smpboot: Max logical packages: 2
[    0.040706] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.084000] smpboot: CPU0: Intel(R) Celeron(R) CPU          540  @ 1.86GHz (family: 0x6, model: 0x16, stepping: 0x1)
[    0.084000] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[    0.084000] ... version:                2
[    0.084000] ... bit width:              40
[    0.084000] ... generic registers:      2
[    0.084000] ... value mask:             000000ffffffffff
[    0.084000] ... max period:             000000007fffffff
[    0.084000] ... fixed-purpose events:   3
[    0.084000] ... event mask:             0000000700000003
[    0.084000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.084000] x86: Booted up 1 node, 1 CPUs
[    0.084000] smpboot: Total of 1 processors activated (3724.29 BogoMIPS)
[    0.084000] devtmpfs: initialized
[    0.084000] x86/mm: Memory block size: 128MB
[    0.085988] PM: Registering ACPI NVS region [mem 0x7f67a000-0x7f6befff] (282624 bytes)
[    0.086063] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.086074] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.086126] pinctrl core: initialized pinctrl subsystem
[    0.086300] NET: Registered protocol family 16
[    0.086582] cpuidle: using governor ladder
[    0.086583] cpuidle: using governor menu
[    0.086609] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    0.086610] Simple Boot Flag at 0x44 set to 0x1
[    0.086622] ACPI: bus type PCI registered
[    0.086625] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.086726] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.086729] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.086743] PCI: Using configuration type 1 for base access
[    0.088020] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.088347] ACPI: Added _OSI(Module Device)
[    0.088349] ACPI: Added _OSI(Processor Device)
[    0.088350] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.088351] ACPI: Added _OSI(Processor Aggregator Device)
[    0.088600] ACPI: Executed 1 blocks of module-level executable AML code
[    0.090463] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.092625] ACPI : EC: EC started
[    0.228036] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as first EC
[    0.228039] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.228041] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as boot DSDT EC to handle transactions
[    0.228042] ACPI: Interpreter enabled
[    0.228069] ACPI: (supports S0 S3 S4 S5)
[    0.228070] ACPI: Using IOAPIC for interrupt routing
[    0.228108] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.407472] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.496541] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.496548] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.496555] ACPI BIOS Error (bug): \_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20160831/nsarguments-189)
[    0.496783] acpi PNP0A08:00: _OSC failed (AE_TYPE); disabling ASPM
[    0.497349] PCI host bridge to bus 0000:00
[    0.497352] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.497354] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.497356] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.497358] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.497361] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.497372] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[    0.497514] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
[    0.497529] pci 0000:00:02.0: reg 0x10: [mem 0x91000000-0x910fffff 64bit]
[    0.497539] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.497545] pci 0000:00:02.0: reg 0x20: [io  0x30d0-0x30d7]
[    0.497673] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
[    0.497686] pci 0000:00:02.1: reg 0x10: [mem 0x91100000-0x911fffff 64bit]
[    0.497870] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[    0.497897] pci 0000:00:1b.0: reg 0x10: [mem 0x92400000-0x92403fff 64bit]
[    0.498019] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.498142] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[    0.498264] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.498330] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.498400] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[    0.498462] pci 0000:00:1d.0: reg 0x20: [io  0x3080-0x309f]
[    0.498597] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[    0.498658] pci 0000:00:1d.1: reg 0x20: [io  0x3060-0x307f]
[    0.498788] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[    0.498849] pci 0000:00:1d.2: reg 0x20: [io  0x3040-0x305f]
[    0.498990] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[    0.499013] pci 0000:00:1d.7: reg 0x10: [mem 0x92404800-0x92404bff]
[    0.499126] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.499238] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.499368] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.499432] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[    0.499555] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[    0.499561] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
[    0.499567] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003)
[    0.499706] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[    0.499724] pci 0000:00:1f.1: reg 0x10: [io  0x30c8-0x30cf]
[    0.499737] pci 0000:00:1f.1: reg 0x14: [io  0x30e4-0x30e7]
[    0.499750] pci 0000:00:1f.1: reg 0x18: [io  0x30c0-0x30c7]
[    0.499762] pci 0000:00:1f.1: reg 0x1c: [io  0x30e0-0x30e3]
[    0.499775] pci 0000:00:1f.1: reg 0x20: [io  0x30a0-0x30af]
[    0.499803] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.499804] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.499806] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.499808] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.499918] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[    0.499942] pci 0000:00:1f.2: reg 0x10: [io  0x30b8-0x30bf]
[    0.499955] pci 0000:00:1f.2: reg 0x14: [io  0x30dc-0x30df]
[    0.499967] pci 0000:00:1f.2: reg 0x18: [io  0x30b0-0x30b7]
[    0.499980] pci 0000:00:1f.2: reg 0x1c: [io  0x30d8-0x30db]
[    0.499993] pci 0000:00:1f.2: reg 0x20: [io  0x3020-0x303f]
[    0.500011] pci 0000:00:1f.2: reg 0x24: [mem 0x92404000-0x924047ff]
[    0.500079] pci 0000:00:1f.2: PME# supported from D3hot
[    0.500190] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[    0.500208] pci 0000:00:1f.3: reg 0x10: [mem 0x92404c00-0x92404cff]
[    0.500253] pci 0000:00:1f.3: reg 0x20: [io  0x3000-0x301f]
[    0.500479] pci 0000:01:00.0: [168c:001c] type 00 class 0x020000
[    0.500516] pci 0000:01:00.0: reg 0x10: [mem 0x91300000-0x9130ffff 64bit]
[    0.500788] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.500802] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.500807] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.500812] pci 0000:00:1c.0:   bridge window [mem 0x91300000-0x923fffff]
[    0.500820] pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[    0.500889] pci 0000:02:01.0: [10ec:8139] type 00 class 0x020000
[    0.500914] pci 0000:02:01.0: reg 0x10: [io  0x1000-0x10ff]
[    0.500929] pci 0000:02:01.0: reg 0x14: [mem 0x91200000-0x912000ff]
[    0.501043] pci 0000:02:01.0: supports D1 D2
[    0.501044] pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
[    0.501165] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[    0.501170] pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
[    0.501175] pci 0000:00:1e.0:   bridge window [mem 0x91200000-0x912fffff]
[    0.501183] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.501185] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.501187] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.501189] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[    0.501302] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.501396] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[    0.501486] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.501576] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.501666] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[    0.501756] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[    0.501846] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[    0.501936] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[    0.502561] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.502723] ACPI : EC: event unblocked
[    0.502732] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.502734] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.502913] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.502914] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.502919] vgaarb: loaded
[    0.502920] vgaarb: bridge control possible 0000:00:02.0
[    0.503065] PCI: Using ACPI for IRQ routing
[    0.514980] PCI: pci_cache_line_size set to 64 bytes
[    0.515046] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.515048] e820: reserve RAM buffer [mem 0x7f4d2000-0x7fffffff]
[    0.515049] e820: reserve RAM buffer [mem 0x7f534000-0x7fffffff]
[    0.515051] e820: reserve RAM buffer [mem 0x7f5bb000-0x7fffffff]
[    0.515052] e820: reserve RAM buffer [mem 0x7f67a000-0x7fffffff]
[    0.515285] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.515291] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.515296] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.517037] clocksource: Switched to clocksource hpet
[    0.527439] VFS: Disk quotas dquot_6.6.0
[    0.527483] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.527643] pnp: PnP ACPI init
[    0.596268] pnp 00:00: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1e.0 BAR 13 [io  0x1000-0x1fff]
[    0.596341] system 00:00: [io  0x0600-0x060f] has been reserved
[    0.596344] system 00:00: [io  0x0610] has been reserved
[    0.596346] system 00:00: [io  0x0800-0x080f] has been reserved
[    0.596348] system 00:00: [io  0x0810-0x0817] has been reserved
[    0.596350] system 00:00: [io  0x0400-0x047f] has been reserved
[    0.596352] system 00:00: [io  0x0500-0x053f] has been reserved
[    0.596355] system 00:00: [io  0xff2c-0xff2f] has been reserved
[    0.596358] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.596360] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.596362] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.596364] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.596367] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.596369] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.596371] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.596377] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.596442] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.596535] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.596587] pnp 00:03: Plug and Play ACPI device, IDs AUI0214 PNP0f13 (active)
[    0.596679] pnp: PnP ACPI: found 4 devices
[    0.603614] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.603658] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.603662] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.603669] pci 0000:00:1c.0:   bridge window [mem 0x91300000-0x923fffff]
[    0.603674] pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[    0.603682] pci 0000:00:1e.0: PCI bridge to [bus 02]
[    0.603686] pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
[    0.603692] pci 0000:00:1e.0:   bridge window [mem 0x91200000-0x912fffff]
[    0.603705] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.603707] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.603709] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.603711] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[    0.603713] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.603715] pci_bus 0000:01: resource 1 [mem 0x91300000-0x923fffff]
[    0.603717] pci_bus 0000:01: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
[    0.603719] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    0.603721] pci_bus 0000:02: resource 1 [mem 0x91200000-0x912fffff]
[    0.603723] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7 window]
[    0.603724] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff window]
[    0.603726] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.603728] pci_bus 0000:02: resource 7 [mem 0x80000000-0xfebfffff window]
[    0.603855] NET: Registered protocol family 2
[    0.604127] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.604213] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.604338] TCP: Hash tables configured (established 16384 bind 16384)
[    0.604415] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.604432] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.604530] NET: Registered protocol family 1
[    0.604558] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.606105] PCI: CLS 0 bytes, default 64
[    0.606204] Unpacking initramfs...
[    1.077199] Freeing initrd memory: 17960K (ffff946635cdb000 - ffff946636e65000)
[    1.077879] audit: initializing netlink subsys (disabled)
[    1.077918] audit: type=2000 audit(1489794206.076:1): initialized
[    1.078350] Initialise system trusted keyrings
[    1.078496] workingset: timestamp_bits=40 max_order=19 bucket_order=0
[    1.078518] zbud: loaded
[    1.153477] Key type asymmetric registered
[    1.153479] Asymmetric key parser 'x509' registered
[    1.153514] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.153555] io scheduler noop registered
[    1.153556] io scheduler deadline registered
[    1.153571] io scheduler cfq registered (default)
[    1.154060] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.154069] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.154095] intel_idle: does not run on family 6 model 22
[    1.154248] Monitor-Mwait will be used to enter C-1 state
[    1.154256] Monitor-Mwait will be used to enter C-2 state
[    1.154260] Monitor-Mwait will be used to enter C-3 state
[    1.154264] tsc: Marking TSC unstable due to TSC halts in idle
[    1.154408] GHES: HEST is not enabled!
[    1.154500] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.155060] Linux agpgart interface v0.103
[    1.155139] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.155140] AMD IOMMUv2 functionality not available on this system
[    1.155290] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    1.190231] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.190254] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.190455] mousedev: PS/2 mouse device common for all mice
[    1.192053] rtc_cmos 00:01: RTC can wake from S4
[    1.192229] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.192266] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.192286] ledtrig-cpu: registered to indicate activity on CPUs
[    1.192646] NET: Registered protocol family 10
[    1.192961] mip6: Mobile IPv6
[    1.192964] NET: Registered protocol family 17
[    1.192967] mpls_gso: MPLS GSO support
[    1.193156] microcode: sig=0x10661, pf=0x80, revision=0x16
[    1.193199] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.193360] registered taskstats version 1
[    1.193363] Loading compiled-in X.509 certificates
[    1.195386] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    1.195835] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    1.195867] zswap: loaded using pool lzo/zbud
[    1.196311] rtc_cmos 00:01: setting system clock to 2017-03-17 23:43:26 UTC (1489794206)
[    1.196399] PM: Hibernation image not present or could not be loaded.
[    1.198455] Freeing unused kernel memory: 1392K (ffffffffa131c000 - ffffffffa1478000)
[    1.198459] Write protecting the kernel read-only data: 12288k
[    1.200229] Freeing unused kernel memory: 2032K (ffff946649204000 - ffff946649400000)
[    1.204861] Freeing unused kernel memory: 1252K (ffff9466496c7000 - ffff946649800000)
[    1.212841] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.226015] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.238209] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.238327] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.238343] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.244868] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.244928] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.246440] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.246465] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.246556] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.246580] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.247062] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.306633] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    1.338341] ACPI: bus type USB registered
[    1.338380] usbcore: registered new interface driver usbfs
[    1.338394] usbcore: registered new interface driver hub
[    1.342874] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.342881] 8139cp 0000:02:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    1.356958] usbcore: registered new device driver usb
[    1.359722] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.365911] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.378544] thermal LNXTHERM:00: registered as thermal_zone0
[    1.378547] ACPI: Thermal Zone [TZ01] (71 C)
[    1.378994] uhci_hcd: USB Universal Host Controller Interface driver
[    1.379252] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.379261] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    1.379272] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.379313] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00003080
[    1.379393] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    1.379395] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.379397] usb usb1: Product: UHCI Host Controller
[    1.379399] usb usb1: Manufacturer: Linux 4.9.0-2-amd64 uhci_hcd
[    1.379400] usb usb1: SerialNumber: 0000:00:1d.0
[    1.379586] hub 1-0:1.0: USB hub found
[    1.379595] hub 1-0:1.0: 2 ports detected
[    1.379921] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.379927] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    1.379937] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.379970] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00003060
[    1.380803] 8139too: 8139too Fast Ethernet driver 0.9.28
[    1.381568] 8139too 0000:02:01.0 eth0: RealTek RTL8139 at 0xffffb68c0033d000, 00:1b:38:f5:af:69, IRQ 16
[    1.383870] SCSI subsystem initialized
[    1.392336] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.392340] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.392342] usb usb2: Product: UHCI Host Controller
[    1.392343] usb usb2: Manufacturer: Linux 4.9.0-2-amd64 uhci_hcd
[    1.392345] usb usb2: SerialNumber: 0000:00:1d.1
[    1.392565] hub 2-0:1.0: USB hub found
[    1.392575] hub 2-0:1.0: 2 ports detected
[    1.392940] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.392948] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    1.392958] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.392987] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00003040
[    1.393061] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.393063] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.393065] usb usb3: Product: UHCI Host Controller
[    1.393067] usb usb3: Manufacturer: Linux 4.9.0-2-amd64 uhci_hcd
[    1.393068] usb usb3: SerialNumber: 0000:00:1d.2
[    1.393238] hub 3-0:1.0: USB hub found
[    1.393246] hub 3-0:1.0: 2 ports detected
[    1.395900] ehci-pci: EHCI PCI platform driver
[    1.407489] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.407502] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[    1.407528] ehci-pci 0000:00:1d.7: debug port 1
[    1.411435] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.412110] ehci-pci 0000:00:1d.7: irq 23, io mem 0x92404800
[    1.429663] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.429799] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    1.429801] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.429804] usb usb4: Product: EHCI Host Controller
[    1.429805] usb usb4: Manufacturer: Linux 4.9.0-2-amd64 ehci_hcd
[    1.429807] usb usb4: SerialNumber: 0000:00:1d.7
[    1.429998] hub 4-0:1.0: USB hub found
[    1.430008] hub 4-0:1.0: 6 ports detected
[    1.433473] libata version 3.00 loaded.
[    1.458277] hub 1-0:1.0: USB hub found
[    1.458290] hub 1-0:1.0: 2 ports detected
[    1.484277] hub 2-0:1.0: USB hub found
[    1.484291] hub 2-0:1.0: 2 ports detected
[    1.512159] hub 3-0:1.0: USB hub found
[    1.512326] hub 3-0:1.0: 2 ports detected
[    1.513079] ata_piix 0000:00:1f.1: version 2.13
[    1.517796] scsi host0: ata_piix
[    1.518125] scsi host1: ata_piix
[    1.518209] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30a0 irq 14
[    1.518211] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30a8 irq 15
[    1.518509] ahci 0000:00:1f.2: version 3.0
[    1.518836] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.518865] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
[    1.518868] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems 
[    1.520641] scsi host2: ahci
[    1.520963] scsi host3: ahci
[    1.521252] scsi host4: ahci
[    1.521345] ata3: SATA max UDMA/133 abar m2048@0x92404000 port 0x92404100 irq 25
[    1.521347] ata4: DUMMY
[    1.521348] ata5: DUMMY
[    1.696639] ata1.00: ATAPI: TSSTcorp CDDVDW TS-L632H, HS02, max MWDMA2
[    1.720263] ata1.00: configured for MWDMA2
[    1.723697] scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L632H  HS02 PQ: 0 ANSI: 5
[    1.756063] usb 4-6: new high-speed USB device number 2 using ehci-pci
[    1.923912] usb 4-6: New USB device found, idVendor=04f2, idProduct=b057
[    1.923914] usb 4-6: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    1.923916] usb 4-6: Product: CNF7041
[    1.923918] usb 4-6: Manufacturer: Chicony Electronics Co., Ltd.
[    1.923920] usb 4-6: SerialNumber: SN0001
[    1.996080] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.996635] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.996639] ata3.00: ATA-8: FUJITSU MHY2120BH, 890B, max UDMA/100
[    1.996641] ata3.00: 234441648 sectors, multi 16: LBA48 
[    1.997244] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.997248] ata3.00: configured for UDMA/100
[    1.998330] scsi 2:0:0:0: Direct-Access     ATA      FUJITSU MHY2120B 890B PQ: 0 ANSI: 5
[    2.007663] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    2.007727] sd 2:0:0:0: [sda] Write Protect is off
[    2.007730] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.007757] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.034531] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.034535] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.035230] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    2.050277]  sda: sda1 sda2 < sda5 >
[    2.051230] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.056377] random: fast init done
[    2.080041] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x35aefe6a1f7, max_idle_ns: 881590404252 ns
[    2.496621] PM: Starting manual resume from disk
[    2.496628] PM: Hibernation image partition 8:5 present
[    2.496629] PM: Looking for hibernation image.
[    2.496958] PM: Image not found (code -22)
[    2.496960] PM: Hibernation image not present or could not be loaded.
[    2.753406] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.907880] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2
[    4.349853] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.495889] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    4.496101] systemd[1]: Detected architecture x86-64.
[    4.509497] systemd[1]: Set hostname to <cax>.
[    4.712828] random: crng init done
[    5.839253] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.839540] systemd[1]: Created slice User and Session Slice.
[    5.839623] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.839728] systemd[1]: Listening on Journal Socket.
[    5.839961] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.840076] systemd[1]: Listening on RPCbind Server Activation Socket.
[    5.840139] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.404581] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    6.550623] systemd-journald[163]: Received request to flush runtime journal from PID 1
[    9.544786] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    9.544793] ACPI: Power Button [PWRB]
[    9.544926] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[    9.544948] ACPI: Lid Switch [LID0]
[    9.545014] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[    9.545017] ACPI: Sleep Button [SLPB]
[    9.545105] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    9.545107] ACPI: Power Button [PWRF]
[    9.652141] ACPI: AC Adapter [AC] (on-line)
[    9.820418] [drm] Initialized
[    9.916044] ACPI: Battery Slot [BAT0] (battery absent)
[   10.048300] wmi: Mapper loaded
[   10.178052] sr 0:0:0:0: Attached scsi generic sg0 type 5
[   10.178124] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   10.308490] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.425782] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20160831/utaddress-247)
[   10.425792] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000043B (\_SB.PCI0.LPC.PMA1) (20160831/utaddress-247)
[   10.425797] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.425800] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000052D (\GPIO) (20160831/utaddress-247)
[   10.425804] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.425840] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.777620] media: Linux media interface: v0.10
[   10.823497] intel_powerclamp: No package C-state available
[   10.835188] Linux video capture interface: v2.00
[   11.054920] snd_hda_codec_conexant hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing.
[   11.055437] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20561 (Hermosa): line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[   11.055439] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.055441] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[   11.055443] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[   11.055445] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[   11.055447] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x1d
[   11.055449] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x18
[   11.060917] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[   11.067008] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   11.069902] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   11.069954] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   11.129624] input: PC Speaker as /devices/platform/pcspkr/input/input10
[   11.336649] iTCO_vendor_support: vendor-support=0
[   11.338780] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   11.338845] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
[   11.339236] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   11.691415] uvcvideo: Found UVC 1.00 device CNF7041 (04f2:b057)
[   11.695298] uvcvideo 4-6:1.0: Entity type for entity Extension 5 was not initialized!
[   11.695303] uvcvideo 4-6:1.0: Entity type for entity Extension 4 was not initialized!
[   11.695305] uvcvideo 4-6:1.0: Entity type for entity Processing 3 was not initialized!
[   11.695308] uvcvideo 4-6:1.0: Entity type for entity Camera 1 was not initialized!
[   11.695669] input: CNF7041 as /devices/pci0000:00/0000:00:1d.7/usb4/4-6/4-6:1.0/input/input11
[   11.695960] usbcore: registered new interface driver uvcvideo
[   11.695961] USB Video Class driver (1.1.1)
[   11.739665] input: HP WMI hotkeys as /devices/virtual/input/input12
[   12.323659] ath5k 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[   12.323862] ath5k 0000:01:00.0: registered as 'phy0'
[   12.846143] ath: EEPROM regdomain: 0x67
[   12.846145] ath: EEPROM indicates we should expect a direct regpair map
[   12.846148] ath: Country alpha2 being used: 00
[   12.846148] ath: Regpair used: 0x67
[   12.876397] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   12.876805] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   12.945494] Adding 4172796k swap on /dev/sda5.  Priority:-1 extents:1 across:4172796k FS
[   23.605349] NET: Registered protocol family 4
[   23.621739] NET: Registered protocol family 3
[   23.627975] NET: Registered protocol family 5
[   23.716712] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   29.031836] 8139too 0000:02:01.0 eth0: link down
[   29.031953] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   32.912716] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   33.182966] 8139too 0000:02:01.0 eth0: link down
[   33.183077] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   33.299829] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   36.593335] wlan0: authenticate with d4:63:fe:12:8b:7e
[   36.601169] wlan0: send auth to d4:63:fe:12:8b:7e (try 1/3)
[   36.602678] wlan0: authenticated
[   36.604363] wlan0: associate with d4:63:fe:12:8b:7e (try 1/3)
[   36.607703] wlan0: RX AssocResp from d4:63:fe:12:8b:7e (capab=0x411 status=0 aid=2)
[   36.607801] wlan0: associated
[   36.607814] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   36.637289] ath: EEPROM regdomain: 0x82d4
[   36.637292] ath: EEPROM indicates we should expect a country code
[   36.637293] ath: doing EEPROM country->regdmn map search
[   36.637294] ath: country maps to regdmn code: 0x37
[   36.637295] ath: Country alpha2 being used: ES
[   36.637296] ath: Regpair used: 0x37
[   36.637297] ath: regdomain 0x82d4 dynamically updated by country IE

Reply to: