Bug#856111: closed by Ben Hutchings <ben@decadent.org.uk> (Bug#856111: fixed in linux 4.9.13-1)
On Wed, 01 Mar 2017, Ben Hutchings wrote:
> > I retried with the images from March 1st, which should include
> > 4.9.13-1 according to
> > https://d-i.debian.org/daily-images/armhf/20170301-00:17/build_hd-media.log
> >
> > I still have no keyboard in d-i.
>
> The installer now seems to include all the USB drivers for this
> platform, and all the HID drivers we build. So I'm puzzled as to what
> might be missing.
>
> Do you have a serial console that could be used to debug this further?
This is on the current dailies, with the default boot options on serial
console:
} U-Boot SPL 2016.11+dfsg1-3 (Dec 22 2016 - 04:44:44)
} DRAM: 1024 MiB
} CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
} Trying to boot from MMC1
}
}
} U-Boot 2016.11+dfsg1-3 (Dec 22 2016 - 04:44:44 +0000) Allwinner Technology
}
} CPU: Allwinner A20 (SUN7I)
} Model: LeMaker Banana Pi
} I2C: ready
} DRAM: 1 GiB
} MMC: SUNXI SD/MMC: 0
} *** Warning - bad CRC, using default environment
}
} HDMI connected: Setting up a 1600x1200 dvi console (overscan 0x0)
} In: serial
} Out: vga
} Err: vga
} SCSI: SATA link 0 timeout.
} AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
} flags: ncq stag pm led clo only pmp pio slum part ccc apst
} Net: eth0: ethernet@01c50000
} starting USB...
} USB0: USB EHCI 1.00
} USB1: USB OHCI 1.0
} USB2: USB EHCI 1.00
} USB3: USB OHCI 1.0
} scanning bus 0 for devices... 1 USB Device(s) found
} scanning bus 2 for devices... 1 USB Device(s) found
} scanning bus 1 for devices... 2 USB Device(s) found
} scanning bus 3 for devices... 1 USB Device(s) found
} Hit any key to stop autoboot: 2 1 0
} switch to partitions #0, OK
} mmc0 is current device
} Scanning mmc 0:1...
} Found U-Boot script /boot.scr
} reading /boot.scr
} 1575 bytes read in 25 ms (61.5 KiB/s)
} ## Executing script at 43100000
} Mainline u-boot / new-style environment detected.
} reading vmlinuz
} 3698064 bytes read in 271 ms (13 MiB/s)
} reading dtbs/sun7i-a20-bananapi.dtb
} 35035 bytes read in 206 ms (166 KiB/s)
} reading initrd.gz
} 13214737 bytes read in 906 ms (13.9 MiB/s)
} Booting the Debian installer...
}
} ## Flattened Device Tree blob at 43000000
} Booting using the fdt blob at 0x43000000
} Loading Ramdisk to 49365000, end 49fff411 ... OK
} Loading Device Tree to 49359000, end 493648da ... OK
}
} Starting kernel ...
}
} [ 0.000000] Booting Linux on physical CPU 0x0
} [ 0.000000] Linux version 4.9.0-2-armmp (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170221 (Debian 6.3.0-8) ) #1 SMP Debian 4.9.13-1 (2017-02-27)
} [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
} [ 0.000000] CPU: div instructions available: patching division code
} [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
} [ 0.000000] OF: fdt:Machine model: LeMaker Banana Pi
} [ 0.000000] efi: Getting EFI parameters from FDT:
} [ 0.000000] efi: UEFI not found.
} [ 0.000000] cma: Reserved 16 MiB at 0x7e800000
} [ 0.000000] Memory policy: Data cache writealloc
} [ 0.000000] psci: probing for conduit method from DT.
} [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
} [ 0.000000] percpu: Embedded 14 pages/cpu @ef6c1000 s27596 r8192 d21556 u57344
} [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258541
} [ 0.000000] Kernel command line: console=ttyS0,115200
} [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
} [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
} [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
} [ 0.000000] Memory: 988928K/1041076K available (7168K kernel code, 953K rwdata, 2212K rodata, 1024K init, 331K bss, 35764K reserved, 16384K cma-reserved, 238260K highmem)
} [ 0.000000] Virtual kernel memory layout:
} [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
} [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
} [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
} [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
} [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
} [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
} [ 0.000000] .text : 0xc0008000 - 0xc0800000 (8160 kB)
} [ 0.000000] .init : 0xc0b00000 - 0xc0c00000 (1024 kB)
} [ 0.000000] .data : 0xc0c00000 - 0xc0cee6fc ( 954 kB)
} [ 0.000000] .bss : 0xc0cf0000 - 0xc0d42dc4 ( 332 kB)
} [ 0.000000] Hierarchical RCU implementation.
} [ 0.000000] Build-time adjustment of leaf fanout to 32.
} [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
} [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
} [ 0.000000] NR_IRQS:16 nr_irqs:16 16
} [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
} [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
} [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
} [ 0.000023] Switching to timer-based delay loop, resolution 41ns
} [ 0.002770] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
} [ 0.003695] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 12741736309 ns
} [ 0.004445] Console: colour dummy device 80x30
} [ 0.004493] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000)
} [ 0.004510] pid_max: default: 32768 minimum: 301
} [ 0.004910] Security Framework initialized
} [ 0.004930] Yama: disabled by default; enable with sysctl kernel.yama.*
} [ 0.004971] AppArmor: AppArmor disabled by boot time parameter
} [ 0.005069] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
} [ 0.005084] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
} [ 0.006335] CPU: Testing write buffer coherency: ok
} [ 0.006407] ftrace: allocating 26623 entries in 79 pages
} [ 0.067925] /cpus/cpu@0 missing clock-frequency property
} [ 0.067963] /cpus/cpu@1 missing clock-frequency property
} [ 0.067978] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
} [ 0.068034] Setting up static identity map for 0x40100000 - 0x40100098
} [ 0.073894] EFI services will not be available.
} [ 0.085637] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
} [ 0.085859] Brought up 2 CPUs
} [ 0.085883] SMP: Total of 2 processors activated (96.00 BogoMIPS).
} [ 0.085890] CPU: All CPU(s) started in HYP mode.
} [ 0.085895] CPU: Virtualization extensions available.
} [ 0.086993] devtmpfs: initialized
} [ 0.099182] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
} [ 0.099696] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
} [ 0.099731] futex hash table entries: 512 (order: 3, 32768 bytes)
} [ 0.100839] pinctrl core: initialized pinctrl subsystem
} [ 0.103209] NET: Registered protocol family 16
} [ 0.105152] DMA: preallocated 256 KiB pool for atomic coherent allocations
} [ 0.107974] No ATAGs?
} [ 0.108023] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
} [ 0.108038] hw-breakpoint: maximum watchpoint size is 8 bytes.
} [ 0.109077] Serial: AMBA PL011 UART driver
} [ 0.144693] reg-fixed-voltage usb0-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb0_vbus_pin@0, deferring probe
} [ 0.144763] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
} [ 0.144799] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
} [ 0.145774] reg-fixed-voltage gmac-3v3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/gmac_power_pin@0, deferring probe
} [ 0.148494] vgaarb: loaded
} [ 0.149653] media: Linux media interface: v0.10
} [ 0.149721] Linux video capture interface: v2.00
} [ 0.149815] pps_core: LinuxPPS API ver. 1 registered
} [ 0.149825] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
} [ 0.149850] PTP clock support registered
} [ 0.152078] clocksource: Switched to clocksource arch_sys_counter
} [ 0.203654] VFS: Disk quotas dquot_6.6.0
} [ 0.203778] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
} [ 0.205274] simple-framebuffer 7f8ad000.framebuffer: framebuffer at 0x7f8ad000, 0x753000 bytes, mapped to 0xf0900000
} [ 0.205298] simple-framebuffer 7f8ad000.framebuffer: format=x8r8g8b8, mode=1600x1200x32, linelength=6400
} [ 0.239772] Console: switching to colour frame buffer device 200x75
} [ 0.273066] simple-framebuffer 7f8ad000.framebuffer: fb0: simplefb registered!
} [ 0.288302] NET: Registered protocol family 2
} [ 0.289390] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
} [ 0.289492] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
} [ 0.289621] TCP: Hash tables configured (established 8192 bind 8192)
} [ 0.289720] UDP hash table entries: 512 (order: 2, 16384 bytes)
} [ 0.289788] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
} [ 0.290134] NET: Registered protocol family 1
} [ 0.290822] Unpacking initramfs...
} [ 1.363917] Freeing initrd memory: 12908K (c9365000 - ca000000)
} [ 1.364422] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
} [ 1.366687] audit: initializing netlink subsys (disabled)
} [ 1.366802] audit: type=2000 audit(1.320:1): initialized
} [ 1.367849] Initialise system trusted keyrings
} [ 1.368481] workingset: timestamp_bits=14 max_order=18 bucket_order=4
} [ 1.368692] zbud: loaded
} [ 1.731182] Key type asymmetric registered
} [ 1.731208] Asymmetric key parser 'x509' registered
} [ 1.731317] bounce: pool size: 64 pages
} [ 1.731473] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
} [ 1.731689] io scheduler noop registered
} [ 1.731704] io scheduler deadline registered
} [ 1.731804] io scheduler cfq registered (default)
} [ 1.738475] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
} [ 1.755477] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
} [ 1.758333] console [ttyS0] disabled
} [ 1.778602] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 45, base_baud = 1500000) is a U6_16550A
} [ 2.489692] console [ttyS0] enabled
} [ 2.516892] 1c28c00.serial: ttyS1 at MMIO 0x1c28c00 (irq = 46, base_baud = 1500000) is a U6_16550A
} [ 2.549618] 1c29c00.serial: ttyS2 at MMIO 0x1c29c00 (irq = 47, base_baud = 1500000) is a U6_16550A
} [ 2.559643] Serial: AMBA driver
} [ 2.566456] libphy: Fixed MDIO Bus: probed
} [ 2.571695] mousedev: PS/2 mouse device common for all mice
} [ 2.579851] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
} [ 2.586691] sunxi-rtc 1c20d00.rtc: RTC enabled
} [ 2.594002] ledtrig-cpu: registered to indicate activity on CPUs
} [ 2.601202] NET: Registered protocol family 10
} [ 2.607013] mip6: Mobile IPv6
} [ 2.610062] NET: Registered protocol family 17
} [ 2.614562] mpls_gso: MPLS GSO support
} [ 2.618410] ThumbEE CPU extension supported.
} [ 2.622719] Registering SWP/SWPB emulation handler
} [ 2.628680] registered taskstats version 1
} [ 2.632852] Loading compiled-in X.509 certificates
} [ 2.650659] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
} [ 2.660319] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
} [ 2.668063] zswap: loaded using pool lzo/zbud
} [ 2.684003] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:05:47 UTC (347)
} [ 2.692172] sr_init: No PMIC hook to init smartreflex
} [ 2.697458] sr_init: platform driver register failed for SR
} [ 2.703522] vcc3v0: disabling
} [ 2.706497] vcc3v3: disabling
} [ 2.709577] vcc5v0: disabling
} [ 2.712573] usb0-vbus: disabling
} [ 2.715800] usb1-vbus: disabling
} [ 2.719051] usb2-vbus: disabling
} [ 2.722292] gmac-3v3: disabling
} [ 2.727277] Freeing unused kernel memory: 1024K (c0b00000 - c0c00000)
} [ 2.799383] random: systemd-udevd: uninitialized urandom read (16 bytes read)
} [ 2.807738] random: udevadm: uninitialized urandom read (16 bytes read)
} [ 2.807786] random: systemd-udevd: uninitialized urandom read (16 bytes read)
} [ 2.807901] random: systemd-udevd: uninitialized urandom read (16 bytes read)
} [ 2.830916] random: udevadm: uninitialized urandom read (16 bytes read)
} [ 2.838291] random: udevadm: uninitialized urandom read (16 bytes read)
} [ 2.845707] random: udevadm: uninitialized urandom read (16 bytes read)
} [ 2.852986] random: udevadm: uninitialized urandom read (16 bytes read)
} [ 2.860170] random: udevadm: uninitialized urandom read (16 bytes read)
} [ 2.867554] random: udevadm: uninitialized urandom read (16 bytes read)
} [ 3.181352] usbcore: registered new interface driver usbfs
} [ 3.187132] usbcore: registered new interface driver hub
} [ 3.192994] usbcore: registered new device driver usb
} [ 3.244444] sunxi-mmc 1c0f000.mmc: Got CD GPIO
} [ 3.291794] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
} [ 3.297416] sunxi-mmc 1c0f000.mmc: base:0xf08fd000 irq:28
} [ 3.354854] mmc0: host does not support reading read-only switch, assuming write-enable
} [ 3.366826] ehci-platform: EHCI generic platform driver
} [ 3.383189] mmc0: new high speed SDHC card at address b368
} [ 3.385990] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
} [ 3.391851] ohci-platform: OHCI generic platform driver
} [ 3.400238] SCSI subsystem initialized
} [ 3.496324] mmcblk0: mmc0:b368 SDC 30.2 GiB
} [ 3.507383] mmcblk0: p1
} [ 3.542290] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
} [ 3.549870] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
} [ 3.555964] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
} [ 3.565033] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc
} [ 3.575075] scsi host0: ahci-sunxi
} [ 3.579183] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 33
} [ 3.908699] ata1: SATA link down (SStatus 0 SControl 300)
} Starting system log daemon: syslogd, klogd.
[curses stuff starts up]
--
| .''`. ** Debian **
Peter Palfrader | : :' : The universal
https://www.palfrader.org/ | `. `' Operating System
| `- https://www.debian.org/
Reply to: