Bug#854662: linux-image-4.9.0-0.bpo.1-marvell: please enable CONFIG_SENSORS_G762
Package: src:linux
Version: 4.9.2-2~bpo8+1
Severity: wishlist
Dear Maintainer,
I am installing debian on a Netgear ReadyNAS Duo v2, and so far everything works except some of the sensors, because CONFIG_SENSORS_G762 is not set:
$ grep CONFIG_SENSORS_G762 /boot/config-4.9.0-0.bpo.1-marvell
# CONFIG_SENSORS_G762 is not set
Please consider enabling this feature. Thank you.
-- Package-specific info:
** Version:
Linux version 4.9.0-0.bpo.1-marvell (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 Debian 4.9.2-2~bpo8+1 (2017-01-26)
** Command line:
root=/dev/md0 console=ttyS0,115200 earlyprintk reason=normal mtdparts=nand_mtd:0x180000@0(u-boot),0x20000@0x180000(u-boot-env),0x600000@0x200000(uImage),0x1000000@0x800000(minirootfs),0x6800000@0x1800000(jffs2);
** Not tainted
** Kernel log:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.0-0.bpo.1-marvell (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 Debian 4.9.2-2~bpo8+1 (2017-01-26)
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] OF: fdt:Machine model: NETGEAR ReadyNAS Duo v2
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] free_area_init_node: node 0, pgdat c059d218, node_mem_map cfdf8000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65536 pages, LIFO batch:15
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: root=/dev/md0 console=ttyS0,115200 earlyprintk reason=normal mtdparts=nand_mtd:0x180000@0(u-boot),0x20000@0x180000(u-boot-env),0x600000@0x200000(uImage),0x1000000@0x800000(minirootfs),0x6800000@0x1800000(jffs2);
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 241080K/262144K available (3796K kernel code, 397K rwdata, 1124K rodata, 300K init, 298K bss, 21064K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xd0800000 - 0xff800000 ( 752 MB)
lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc03bd2c8 (3797 kB)
.init : 0xc04fd000 - 0xc0548000 ( 300 kB)
.data : 0xc0548000 - 0xc05ab7e8 ( 398 kB)
.bss : 0xc05ab7e8 - 0xc05f6060 ( 299 kB)
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[ 0.000006] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[ 0.008266] Console: colour dummy device 80x30
[ 0.012817] Calibrating delay loop... 1594.36 BogoMIPS (lpj=3188736)
[ 0.042766] pid_max: default: 32768 minimum: 301
[ 0.047596] Security Framework initialized
[ 0.051784] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.058590] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.065292] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.073254] CPU: Testing write buffer coherency: ok
[ 0.078286] ftrace: allocating 16938 entries in 34 pages
[ 0.109047] Setting up static identity map for 0x8200 - 0x823c
[ 0.115169] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1
[ 0.122672] devtmpfs: initialized
[ 0.130442] VFP support v0.3: not present
[ 0.134688] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.144697] pinctrl core: initialized pinctrl subsystem
[ 0.150947] NET: Registered protocol family 16
[ 0.155764] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.163874] cpuidle: using governor ladder
[ 0.168070] cpuidle: using governor menu
[ 0.172333] Feroceon L2: Enabling L2
[ 0.176022] Feroceon L2: Cache support initialised.
[ 0.181173] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set
[ 0.195085] No ATAGs?
[ 0.201235] clocksource: Switched to clocksource orion_clocksource
[ 0.218696] VFS: Disk quotas dquot_6.6.0
[ 0.222792] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.236187] NET: Registered protocol family 2
[ 0.241328] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.248386] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.254828] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.261336] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.267251] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.273729] NET: Registered protocol family 1
[ 0.278178] PCI: CLS 0 bytes, default 32
[ 0.278387] Unpacking initramfs...
[ 1.097240] random: fast init done
[ 1.131695] Freeing initrd memory: 12600K (c2000000 - c2c4e000)
[ 1.138298] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 1.144527] audit: initializing netlink subsys (disabled)
[ 1.150049] audit: type=2000 audit(1.092:1): initialized
[ 1.155717] workingset: timestamp_bits=30 max_order=16 bucket_order=0
[ 1.162300] zbud: loaded
[ 1.166224] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.173812] io scheduler noop registered
[ 1.177873] io scheduler cfq registered (default)
[ 1.183570] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[ 1.192324] mvebu-pcie mbus@f1000000:pcie-controller@82000000: PCI host bridge to bus 0000:00
[ 1.200920] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
[ 1.207254] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[ 1.214190] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.219769] pci 0000:00:01.0: [11ab:6282] type 01 class 0x060400
[ 1.219969] PCI: bus0: Fast back to back transfers disabled
[ 1.225619] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.233791] pci 0000:01:00.0: [1033:0194] type 00 class 0x0c0330
[ 1.233825] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x40001fff 64bit]
[ 1.233950] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 1.245275] PCI: bus1: Fast back to back transfers disabled
[ 1.250923] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.251025] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
[ 1.257885] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe0001fff 64bit]
[ 1.265267] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.270310] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff]
[ 1.277217] pcieport 0000:00:01.0: enabling device (0140 -> 0142)
[ 1.283766] mv_xor f1060800.xor: Marvell shared XOR driver
[ 1.318176] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 1.325701] mv_xor f1060900.xor: Marvell shared XOR driver
[ 1.362154] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 1.369869] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 1.377148] console [ttyS0] disabled
[ 1.380854] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A
[ 1.389887] console [ttyS0] enabled
[ 1.396981] bootconsole [earlycon0] disabled
[ 1.406621] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[ 1.413026] nand: Hynix H27U1G8F2BTR-BC
[ 1.416889] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.424513] Scanning device for bad blocks
[ 1.442431] Bad eraseblock 184 at 0x000001700000
[ 1.475436] Bad eraseblock 564 at 0x000004680000
[ 1.514386] mtd: no mtd-id
[ 1.517117] 5 ofpart partitions found on MTD device orion_nand
[ 1.522984] Creating 5 MTD partitions on "orion_nand":
[ 1.528158] 0x000000000000-0x000000180000 : "u-boot"
[ 1.534145] 0x000000180000-0x0000001a0000 : "u-boot-env"
[ 1.540386] 0x000000200000-0x000000800000 : "uImage"
[ 1.546319] 0x000000800000-0x000001800000 : "minirootfs"
[ 1.552600] 0x000001800000-0x000008000000 : "jffs2"
[ 1.559173] mousedev: PS/2 mouse device common for all mice
[ 2.585267] rtc-mv f1010300.rtc: internal RTC not ticking
[ 2.590833] i2c /dev entries driver
[ 2.598418] rtc-rs5c372 0-0032: rs5c372a found, 24hr
[ 2.610727] rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0
[ 2.618771] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.625123] NET: Registered protocol family 17
[ 2.630067] registered taskstats version 1
[ 2.634247] zswap: loaded using pool lzo/zbud
[ 2.641535] rtc-rs5c372 0-0032: setting system clock to 2017-02-09 06:59:47 UTC (1486623587)
[ 2.651165] Freeing unused kernel memory: 300K (c04fd000 - c0548000)
[ 2.657563] This architecture does not have kernel memory protection.
[ 2.719130] systemd-udevd[55]: starting version 215
[ 2.841569] usbcore: registered new interface driver usbfs
[ 2.871097] libphy: Fixed MDIO Bus: probed
[ 2.878403] libphy: orion_mdio_bus: probed
[ 2.882682] usbcore: registered new interface driver hub
[ 2.900692] SCSI subsystem initialized
[ 2.913183] usbcore: registered new device driver usb
[ 2.922787] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.955276] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 2.969732] ehci-orion: EHCI orion driver
[ 2.979885] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 2.992247] libata version 3.00 loaded.
[ 2.993981] sata_mv f1080000.sata: version 1.28
[ 2.994195] sata_mv f1080000.sata: slots 32 ports 2
[ 3.017004] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 3.041841] scsi host0: sata_mv
[ 3.054532] scsi host1: sata_mv
[ 3.058744] xhci_hcd 0000:01:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
[ 3.068106] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 2c:b0:5d:be:f0:2a
[ 3.082388] ata1: SATA max UDMA/133 irq 33
[ 3.086533] ata2: SATA max UDMA/133 irq 33
[ 3.113230] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.120093] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.127352] usb usb1: Product: xHCI Host Controller
[ 3.132262] usb usb1: Manufacturer: Linux 4.9.0-0.bpo.1-marvell xhci-hcd
[ 3.139002] usb usb1: SerialNumber: 0000:01:00.0
[ 3.148188] orion-ehci f1050000.ehci: EHCI Host Controller
[ 3.172102] hub 1-0:1.0: USB hub found
[ 3.175924] hub 1-0:1.0: 2 ports detected
[ 3.180255] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 2
[ 3.188006] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 3.193421] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
[ 3.199417] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3
[ 3.206943] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.215164] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.221998] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.229264] usb usb3: Product: xHCI Host Controller
[ 3.234172] usb usb3: Manufacturer: Linux 4.9.0-0.bpo.1-marvell xhci-hcd
[ 3.240912] usb usb3: SerialNumber: 0000:01:00.0
[ 3.245582] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[ 3.252546] hub 3-0:1.0: USB hub found
[ 3.256371] hub 3-0:1.0: 2 ports detected
[ 3.260859] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.267703] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.274966] usb usb2: Product: EHCI Host Controller
[ 3.279873] usb usb2: Manufacturer: Linux 4.9.0-0.bpo.1-marvell ehci_hcd
[ 3.286619] usb usb2: SerialNumber: f1050000.ehci
[ 3.298821] hub 2-0:1.0: USB hub found
[ 3.302655] hub 2-0:1.0: 1 port detected
[ 3.741264] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[ 3.769290] ata1.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
[ 3.775948] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.787363] ata1.00: configured for UDMA/133
[ 3.792056] scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-00L 1A01 PQ: 0 ANSI: 5
[ 4.273265] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[ 4.301291] ata2.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
[ 4.307947] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 4.319369] ata2.00: configured for UDMA/133
[ 4.324028] scsi 1:0:0:0: Direct-Access ATA WDC WD10EADS-00L 1A01 PQ: 0 ANSI: 5
[ 4.343464] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 4.354362] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 4.362999] sd 0:0:0:0: [sda] Write Protect is off
[ 4.367841] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.368035] sd 1:0:0:0: [sdb] Write Protect is off
[ 4.372864] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.372952] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.382132] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.436340] sdb: sdb1 sdb2 sdb3
[ 4.441802] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 4.447169] sda: sda1 sda2 sda3
[ 4.452588] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.461325] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.466988] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.758354] md: md0 stopped.
[ 4.771950] md: bind<sdb1>
[ 4.778436] md: bind<sda1>
[ 4.788304] md: raid1 personality registered for level 1
[ 4.796886] md/raid1:md0: active with 2 out of 2 mirrors
[ 4.802413] md0: detected capacity change from 0 to 4293906432
[ 4.858669] md: md1 stopped.
[ 4.874664] md: bind<sdb2>
[ 4.878171] md: bind<sda2>
[ 4.888365] md/raid1:md1: active with 2 out of 2 mirrors
[ 4.893966] md1: detected capacity change from 0 to 536858624
[ 4.950685] md: md2 stopped.
[ 4.968602] md: bind<sdb3>
[ 4.985833] md: bind<sda3>
[ 4.992693] md/raid1:md2: active with 2 out of 2 mirrors
[ 4.998223] md2: detected capacity change from 0 to 995369730048
[ 5.094944] device-mapper: uevent: version 1.0.3
[ 5.101080] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 5.403340] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 5.641338] random: crng init done
[ 6.795648] systemd-udevd[295]: starting version 215
[ 7.075573] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 7.198268] orion_wdt: Initial timeout 21 sec
[ 7.380460] marvell-cesa f1030000.crypto: CESA device successfully registered
[ 8.693971] Adding 524272k swap on /dev/md1. Priority:-1 extents:1 across:524272k FS
[ 8.858007] EXT4-fs (md0): re-mounted. Opts: (null)
[ 9.149377] EXT4-fs (md0): re-mounted. Opts: errors=remount-ro
[ 11.395001] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 12.850650] NET: Registered protocol family 10
[ 12.859847] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.278791] RPC: Registered named UNIX socket transport module.
[ 13.284776] RPC: Registered udp transport module.
[ 13.289509] RPC: Registered tcp transport module.
[ 13.294242] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 13.327845] FS-Cache: Loaded
[ 13.377614] FS-Cache: Netfs 'nfs' registered for caching
[ 13.424398] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 14.899639] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[ 14.909595] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 4326.273408] i2c i2c-0: mv64xxx_i2c_fsm: Ctlr Error -- state: 0x7, status: 0x38, addr: 0x36, flags: 0x1
[ 4326.303586] i2c i2c-0: mv64xxx_i2c_fsm: Ctlr Error -- state: 0x2, status: 0x0, addr: 0x37, flags: 0x1
** Model information
Hardware : Marvell Kirkwood (Flattened Device Tree)
Revision : 0000
Device Tree model: NETGEAR ReadyNAS Duo v2
** Loaded modules:
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
grace
fscache
sunrpc
ipv6
evdev
marvell_cesa
des_generic
orion_wdt
kirkwood_thermal
gpio_keys
ext4
crc16
jbd2
fscrypto
mbcache
dm_mod
raid1
md_mod
sg
sd_mod
sata_mv
xhci_pci
ehci_orion
xhci_hcd
marvell
libata
mv643xx_eth
ehci_hcd
scsi_mod
mvmdio
of_mdio
fixed_phy
libphy
usbcore
usb_common
** PCI devices:
not available
** USB devices:
not available
-- System Information:
Debian Release: 8.7
APT prefers stable
APT policy: (990, 'stable'), (500, 'stable-updates')
Architecture: armel (armv5tel)
Kernel: Linux 4.9.0-0.bpo.1-marvell
Locale: LANG=en_CA.utf8, LC_CTYPE=en_CA.utf8 (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)
Versions of packages linux-image-4.9.0-0.bpo.1-marvell depends on:
ii initramfs-tools [linux-initramfs-tool] 0.120+deb8u2
ii kmod 18-3
ii linux-base 4.3~bpo8+1
Versions of packages linux-image-4.9.0-0.bpo.1-marvell recommends:
ii firmware-linux-free 3.3
ii u-boot-tools 2014.10+dfsg1-5
Versions of packages linux-image-4.9.0-0.bpo.1-marvell suggests:
pn debian-kernel-handbook <none>
pn linux-doc-4.9 <none>
Versions of packages linux-image-4.9.0-0.bpo.1-marvell is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- debconf information:
-- debsums errors found:
Reply to: