Bug#883938: same issue
Have the same issue (kernel panic) after kernel upgade this night. I had to restore the old kernel+initrd+modules from backup (Linux xxx 3.16.0-4-amd64 #1 SMP Debian 3.16.43-2+deb8u5 (2017-09-19) x86_64 GNU/Linux).
Server: HP ProLiant DL380 G6
# lspci
00:00.0 Host bridge: Intel Corporation 5520 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13)
00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13)
00:04.0 PCI bridge: Intel Corporation 5520/X58 I/O Hub PCI Express Root Port 4 (rev 13)
00:05.0 PCI bridge: Intel Corporation 5520/X58 I/O Hub PCI Express Root Port 5 (rev 13)
00:06.0 PCI bridge: Intel Corporation 5520/X58 I/O Hub PCI Express Root Port 6 (rev 13)
00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13)
00:08.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 8 (rev 13)
00:09.0 PCI bridge: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI Express Root Port 9 (rev 13)
00:0a.0 PCI bridge: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI Express Root Port 10 (rev 13)
00:0d.0 Host bridge: Intel Corporation Device 343a (rev 13)
00:0d.1 Host bridge: Intel Corporation Device 343b (rev 13)
00:0d.2 Host bridge: Intel Corporation Device 343c (rev 13)
00:0d.3 Host bridge: Intel Corporation Device 343d (rev 13)
00:0d.4 Host bridge: Intel Corporation 7500/5520/5500/X58 Physical Layer Port 0 (rev 13)
00:0d.5 Host bridge: Intel Corporation 7500/5520/5500 Physical Layer Port 1 (rev 13)
00:0d.6 Host bridge: Intel Corporation Device 341a (rev 13)
00:0e.0 Host bridge: Intel Corporation Device 341c (rev 13)
00:0e.1 Host bridge: Intel Corporation Device 341d (rev 13)
00:0e.2 Host bridge: Intel Corporation Device 341e (rev 13)
00:0e.3 Host bridge: Intel Corporation Device 341f (rev 13)
00:0e.4 Host bridge: Intel Corporation Device 3439 (rev 13)
00:14.0 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub System Management Registers (rev 13)
00:14.1 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13)
00:14.2 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13)
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3
00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.3 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIB (ICH10) LPC Interface Controller
01:03.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] ES1000 (rev 02)
01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Controller (rev 03)
01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out Processor (rev 03)
01:04.4 USB controller: Hewlett-Packard Company Integrated Lights-Out Standard Virtual USB Controller
01:04.6 IPMI SMIC interface: Hewlett-Packard Company Integrated Lights-Out Standard KCS Interface
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
02:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
03:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
03:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
04:00.0 RAID bus controller: Hewlett-Packard Company Smart Array G6 controllers (rev 01)
14:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9125 PCIe SATA 6.0 Gb/s controller (rev 11)
3e:00.0 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture Generic Non-core Registers (rev 02)
3e:00.1 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture System Address Decoder (rev 02)
3e:02.0 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 0 (rev 02)
3e:02.1 Host bridge: Intel Corporation Xeon 5600 Series QPI Physical 0 (rev 02)
3e:02.2 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port Link 0 (rev 02)
3e:02.3 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port Link 1 (rev 02)
3e:02.4 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 1 (rev 02)
3e:02.5 Host bridge: Intel Corporation Xeon 5600 Series QPI Physical 1 (rev 02)
3e:03.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Registers (rev 02)
3e:03.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Target Address Decoder (rev 02)
3e:03.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller RAS Registers (rev 02)
3e:03.4 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Test Registers (rev 02)
3e:04.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Control (rev 02)
3e:04.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Address (rev 02)
3e:04.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Rank (rev 02)
3e:04.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Thermal Control (rev 02)
3e:05.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Control (rev 02)
3e:05.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Address (rev 02)
3e:05.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Rank (rev 02)
3e:05.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Thermal Control (rev 02)
3e:06.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Control (rev 02)
3e:06.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Address (rev 02)
3e:06.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Rank (rev 02)
3e:06.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Thermal Control (rev 02)
3f:00.0 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture Generic Non-core Registers (rev 02)
3f:00.1 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture System Address Decoder (rev 02)
3f:02.0 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 0 (rev 02)
3f:02.1 Host bridge: Intel Corporation Xeon 5600 Series QPI Physical 0 (rev 02)
3f:02.2 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port Link 0 (rev 02)
3f:02.3 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port Link 1 (rev 02)
3f:02.4 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 1 (rev 02)
3f:02.5 Host bridge: Intel Corporation Xeon 5600 Series QPI Physical 1 (rev 02)
3f:03.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Registers (rev 02)
3f:03.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Target Address Decoder (rev 02)
3f:03.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller RAS Registers (rev 02)
3f:03.4 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Test Registers (rev 02)
3f:04.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Control (rev 02)
3f:04.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Address (rev 02)
3f:04.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Rank (rev 02)
3f:04.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Thermal Control (rev 02)
3f:05.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Control (rev 02)
3f:05.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Address (rev 02)
3f:05.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Rank (rev 02)
3f:05.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Thermal Control (rev 02)
3f:06.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Control (rev 02)
3f:06.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Address (rev 02)
3f:06.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Rank (rev 02)
3f:06.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Thermal Control (rev 02)
### old kernel: Linux xxx 3.16.0-4-amd64 #1 SMP Debian 3.16.43-2+deb8u5 (2017-09-19) x86_64 GNU/Linux
### Old kernel dmesg
# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.43-2+deb8u5 (2017-09-19)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/server-root ro console=tty0 console=ttyS0 earlyprintk=serial,ttyS0 nomodeset nmi_watchdog=panic,1 panic=10
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df61efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df61f000-0x00000000df62bfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000df62c000-0x00000000df62cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df62d000-0x00000000e3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fee0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000121fffefff] usable
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: HP ProLiant DL380 G6, BIOS P62 07/02/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x121ffff max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xdf62d max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f4f80-0x000f4f8f] mapped at [ffff8800000f4f80]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[ 0.000000] BRK [0x01af8000, 0x01af8fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x121fc00000-0x121fdfffff]
[ 0.000000] [mem 0x121fc00000-0x121fdfffff] page 2M
[ 0.000000] BRK [0x01af9000, 0x01af9fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x121c000000-0x121fbfffff]
[ 0.000000] [mem 0x121c000000-0x121fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1200000000-0x121bffffff]
[ 0.000000] [mem 0x1200000000-0x121bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1000000000-0x11ffffffff]
[ 0.000000] [mem 0x1000000000-0x11ffffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xdf61efff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xdf5fffff] page 2M
[ 0.000000] [mem 0xdf600000-0xdf61efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xdf62c000-0xdf62cfff]
[ 0.000000] [mem 0xdf62c000-0xdf62cfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0xfffffffff]
[ 0.000000] [mem 0x100000000-0xfffffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x121fe00000-0x121fffefff]
[ 0.000000] [mem 0x121fe00000-0x121fffefff] page 4k
[ 0.000000] BRK [0x01afa000, 0x01afafff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35c2c000-0x36e0dfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F4F00 000024 (v02 HP )
[ 0.000000] ACPI: XSDT 0x00000000DF620340 0000B4 (v01 HP ProLiant 00000002 ▒? 0000162E)
[ 0.000000] ACPI: FACP 0x00000000DF620440 0000F4 (v03 HP ProLiant 00000002 ▒? 0000162E)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20140424/tbfadt-704)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20140424/tbfadt-704)
[ 0.000000] ACPI: DSDT 0x00000000DF620540 00200D (v01 HP DSDT 00000001 INTL 20030228)
[ 0.000000] ACPI: FACS 0x00000000DF61F100 000040
[ 0.000000] ACPI: FACS 0x00000000DF61F100 000040
[ 0.000000] ACPI: SPCR 0x00000000DF61F140 000050 (v01 HP SPCRRBSU 00000001 ▒? 0000162E)
[ 0.000000] ACPI: MCFG 0x00000000DF61F1C0 00003C (v01 HP ProLiant 00000001 00000000)
[ 0.000000] ACPI: HPET 0x00000000DF61F200 000038 (v01 HP ProLiant 00000002 ▒? 0000162E)
[ 0.000000] ACPI: FFFF 0x00000000DF61F240 000064 (v02 HP ProLiant 00000002 ▒? 0000162E)
[ 0.000000] ACPI: SPMI 0x00000000DF61F2C0 000040 (v05 HP ProLiant 00000001 ▒? 0000162E)
[ 0.000000] ACPI: ERST 0x00000000DF61F300 0001D0 (v01 HP ProLiant 00000001 ▒? 0000162E)
[ 0.000000] ACPI: APIC 0x00000000DF61F500 00015E (v01 HP ProLiant 00000002 00000000)
[ 0.000000] ACPI: SRAT 0x00000000DF61F680 000570 (v01 HP Proliant 00000001 ▒? 0000162E)
[ 0.000000] ACPI: FFFF 0x00000000DF61FC00 000176 (v01 HP ProLiant 00000001 ▒? 0000162E)
[ 0.000000] ACPI: BERT 0x00000000DF61FD80 000030 (v01 HP ProLiant 00000001 ▒? 0000162E)
[ 0.000000] ACPI: HEST 0x00000000DF61FDC0 0000BC (v01 HP ProLiant 00000001 ▒? 0000162E)
[ 0.000000] ACPI: DMAR 0x00000000DF61FE80 00015E (v01 HP ProLiant 00000001 ▒? 0000162E)
[ 0.000000] ACPI: SSDT 0x00000000DF622580 000125 (v03 HP CRSPCI0 00000002 HP 00000001)
[ 0.000000] ACPI: SSDT 0x00000000DF6226C0 00025D (v03 HP riser2a 00000002 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000DF622940 0003BB (v01 HP pcc 00000001 INTL 20090625)
[ 0.000000] ACPI: SSDT 0x00000000DF622D00 000377 (v01 HP pmab 00000001 INTL 20090625)
[ 0.000000] ACPI: SSDT 0x00000000DF623080 004104 (v01 INTEL PPM RCM 00000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x12 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x13 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x14 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x15 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x20 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x21 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x22 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x23 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x24 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x25 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x30 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x31 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x32 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x33 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x34 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x35 -> Node 1
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0xdfffffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x91fffffff]
[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x920000000-0x121fffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xdfffffff] + [mem 0x100000000-0x91fffffff] -> [mem 0x00000000-0x91fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x91fffffff]
[ 0.000000] NODE_DATA [mem 0x91fffb000-0x91fffffff]
[ 0.000000] Initmem setup node 1 [mem 0x920000000-0x121fffefff]
[ 0.000000] NODE_DATA [mem 0x121fffa000-0x121fffefff]
[ 0.000000] [ffffea001ff00000-ffffea001fffffff] potential offnode page_structs
[ 0.000000] [ffffea0000000000-ffffea001fffffff] PMD -> [ffff8808fbe00000-ffff88091b7fffff] on node 0
[ 0.000000] [ffffea0020000000-ffffea003f7fffff] PMD -> [ffff8811fb400000-ffff88121abfffff] on node 1
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x121fffefff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xdf61efff]
[ 0.000000] node 0: [mem 0xdf62c000-0xdf62cfff]
[ 0.000000] node 0: [mem 0x100000000-0x91fffffff]
[ 0.000000] node 1: [mem 0x920000000-0x121fffefff]
[ 0.000000] On node 0 totalpages: 9434558
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12454 pages used for memmap
[ 0.000000] DMA32 zone: 910880 pages, LIFO batch:31
[ 0.000000] Normal zone: 116480 pages used for memmap
[ 0.000000] Normal zone: 8519680 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 9437183
[ 0.000000] Normal zone: 129024 pages used for memmap
[ 0.000000] Normal zone: 9437183 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x908
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x30] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x24] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x34] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x22] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x32] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x26] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x16] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x36] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x31] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x35] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x33] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x27] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x37] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec80000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 0, version 32, address 0xfec80000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 32 CPUs, 8 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf61f000-0xdf62bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf62d000-0xe3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfee0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee10000-0xff7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.000000] e820: [mem 0xe4000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:32 nr_node_ids:2
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88091fc00000 s80960 r8192 d21440 u131072
[ 0.000000] pcpu-alloc: s80960 r8192 d21440 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 02 04 06 08 10 12 14 16 18 20 22 24 26 28 30
[ 0.000000] pcpu-alloc: [1] 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31
[ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 18613706
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/server-root ro console=tty0 console=ttyS0 earlyprintk=serial,ttyS0 nomodeset nmi_watchdog=panic,1 panic=10
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 74353148K/75486964K available (5244K kernel code, 948K rwdata, 1836K rodata, 1208K init, 840K bss, 1133816K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=32.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[ 0.000000] NR_IRQS:33024 nr_irqs:1344 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] bootconsole [earlyser0] disabled
[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2932.758 MHz processor
[ 0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 5865.51 BogoMIPS (lpj=11731032)
[ 0.002361] pid_max: default: 32768 minimum: 301
[ 0.003311] ACPI: Core revision 20140424
[ 0.007937] ACPI: All ACPI Tables successfully acquired
[ 0.009167] Security Framework initialized
[ 0.010065] AppArmor: AppArmor disabled by boot time parameter
[ 0.011476] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.019641] Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
[ 0.048158] Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
[ 0.060503] Mount-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.062149] Mountpoint-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.064568] Initializing cgroup subsys memory
[ 0.065624] Initializing cgroup subsys devices
[ 0.066677] Initializing cgroup subsys freezer
[ 0.067716] Initializing cgroup subsys net_cls
[ 0.068867] Initializing cgroup subsys blkio
[ 0.069890] Initializing cgroup subsys perf_event
[ 0.070933] Initializing cgroup subsys net_prio
[ 0.071963] CPU: Physical Processor ID: 0
[ 0.072873] CPU: Processor Core ID: 0
[ 0.073728] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.076941] mce: CPU supports 9 MCE banks
[ 0.077921] CPU0: Thermal monitoring enabled (TM1)
[ 0.078976] process: using mwait in idle threads
[ 0.080081] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
[ 0.082954] Freeing SMP alternatives memory: 20K (ffffffff81a1d000 - ffffffff81a22000)
[ 0.085785] ftrace: allocating 21704 entries in 85 pages
[ 0.095628] dmar: Host address width 39
[ 0.096568] dmar: DRHD base: 0x000000e7ffe000 flags: 0x1
[ 0.097785] dmar: IOMMU 0: reg_base_addr e7ffe000 ver 1:0 cap c90780106f0462 ecap f0207e
[ 0.099422] dmar: RMRR base: 0x000000df7fc000 end: 0x000000df7fdfff
[ 0.100708] dmar: RMRR base: 0x000000df7f5000 end: 0x000000df7fafff
[ 0.102060] dmar: RMRR base: 0x000000df63e000 end: 0x000000df63ffff
[ 0.103342] dmar: ATSR flags: 0x0
[ 0.104253] This system BIOS has enabled interrupt remapping
on a chipset that contains an erratum making that
feature unstable. To maintain system stability
interrupt remapping is being disabled. Please
contact your BIOS vendor for an update
[ 0.109533] Switched APIC routing to physical flat.
[ 0.111220] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.152114] smpboot: CPU0: Intel(R) Xeon(R) CPU X5670 @ 2.93GHz (fam: 06, model: 2c, stepping: 02)
[ 0.260197] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Broken BIOS detected, complain to your hardware vendor.
[ 0.262906] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
[ 0.264518] Intel PMU driver.
[ 0.265278] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.266616] ... version: 3
[ 0.267566] ... bit width: 48
[ 0.268596] ... generic registers: 4
[ 0.269554] ... value mask: 0000ffffffffffff
[ 0.270750] ... max period: 000000007fffffff
[ 0.271895] ... fixed-purpose events: 3
[ 0.272740] ... event mask: 000000070000000f
[ 0.275511] x86: Booting SMP configuration:
[ 0.276524] .... node #1, CPUs: #1
[ 0.388530] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.391101] .... node #0, CPUs: #2
[ 0.405456] .... node #1, CPUs: #3
[ 0.419679] .... node #0, CPUs: #4
[ 0.434086] .... node #1, CPUs: #5
[ 0.448199] .... node #0, CPUs: #6
[ 0.462334] .... node #1, CPUs: #7
[ 0.476662] .... node #0, CPUs: #8
[ 0.490937] .... node #1, CPUs: #9
[ 0.505088] .... node #0, CPUs: #10
[ 0.519382] .... node #1, CPUs: #11
[ 0.533657] .... node #0, CPUs: #12
[ 0.547928] .... node #1, CPUs: #13
[ 0.562151] .... node #0, CPUs: #14
[ 0.576476] .... node #1, CPUs: #15
[ 0.590711] .... node #0, CPUs: #16
[ 0.604975] .... node #1, CPUs: #17
[ 0.619176] .... node #0, CPUs: #18
[ 0.633449] .... node #1, CPUs: #19
[ 0.647693] .... node #0, CPUs: #20
[ 0.662082] .... node #1, CPUs: #21
[ 0.676285] .... node #0, CPUs: #22
[ 0.690580] .... node #1, CPUs: #23
[ 0.704523] x86: Booted up 2 nodes, 24 CPUs
[ 0.705462] smpboot: Total of 24 processors activated (140765.88 BogoMIPS)
[ 0.734715] devtmpfs: initialized
[ 0.735655] memory block size : 128MB
[ 0.745629] futex hash table entries: 8192 (order: 7, 524288 bytes)
[ 0.747932] pinctrl core: initialized pinctrl subsystem
[ 0.749129] NET: Registered protocol family 16
[ 0.750311] cpuidle: using governor ladder
[ 0.751304] cpuidle: using governor menu
[ 0.752304] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.754105] ACPI: bus type PCI registered
[ 0.755087] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.756636] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.758553] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.760310] PCI: Using configuration type 1 for base access
[ 0.761681] PCI: HP ProLiant DL380 detected, enabling pci=bfsort.
[ 0.776709] ACPI: Added _OSI(Module Device)
[ 0.777786] ACPI: Added _OSI(Processor Device)
[ 0.778855] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.779834] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.785544] ACPI: Interpreter enabled
[ 0.786424] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.788556] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.790741] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[ 0.792846] ACPI: (supports S0 S4 S5)
[ 0.793747] ACPI: Using IOAPIC for interrupt routing
[ 0.794928] HEST: Table parsing has been initialized.
[ 0.796148] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.801747] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-19])
[ 0.803018] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.804632] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.806008] acpi PNP0A08:00: host bridge window expanded to [mem 0xfed00000-0xfed44fff]; [mem 0xfed00000-0xfed03fff] ignored
[ 0.808781] PCI host bridge to bus 0000:00
[ 0.809776] pci_bus 0000:00: root bus resource [bus 00-19]
[ 0.810907] pci_bus 0000:00: root bus resource [mem 0xe7000000-0xfbffffff]
[ 0.812587] pci_bus 0000:00: root bus resource [io 0x1000-0x5fff]
[ 0.814031] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.815486] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.816932] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff]
[ 0.818161] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed44fff]
[ 0.819651] pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb]
[ 0.821103] pci_bus 0000:00: root bus resource [io 0x03c0-0x03df]
[ 0.822475] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.823920] pci 0000:00:00.0: [8086:3406] type 00 class 0x060000
[ 0.823970] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.824036] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[ 0.824086] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.824150] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
[ 0.824198] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.824261] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[ 0.824310] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.824373] pci 0000:00:04.0: [8086:340b] type 01 class 0x060400
[ 0.824421] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.824485] pci 0000:00:05.0: [8086:340c] type 01 class 0x060400
[ 0.824533] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.824595] pci 0000:00:06.0: [8086:340d] type 01 class 0x060400
[ 0.824643] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.824706] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[ 0.824755] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.824818] pci 0000:00:08.0: [8086:340f] type 01 class 0x060400
[ 0.824866] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
[ 0.824928] pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
[ 0.824976] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.825135] pci 0000:00:0a.0: [8086:3411] type 01 class 0x060400
[ 0.825183] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.825248] pci 0000:00:0d.0: [8086:343a] type 00 class 0x060000
[ 0.825338] pci 0000:00:0d.1: [8086:343b] type 00 class 0x060000
[ 0.825428] pci 0000:00:0d.2: [8086:343c] type 00 class 0x060000
[ 0.825515] pci 0000:00:0d.3: [8086:343d] type 00 class 0x060000
[ 0.825602] pci 0000:00:0d.4: [8086:3418] type 00 class 0x060000
[ 0.825688] pci 0000:00:0d.5: [8086:3419] type 00 class 0x060000
[ 0.825773] pci 0000:00:0d.6: [8086:341a] type 00 class 0x060000
[ 0.825860] pci 0000:00:0e.0: [8086:341c] type 00 class 0x060000
[ 0.825947] pci 0000:00:0e.1: [8086:341d] type 00 class 0x060000
[ 0.826032] pci 0000:00:0e.2: [8086:341e] type 00 class 0x060000
[ 0.826120] pci 0000:00:0e.3: [8086:341f] type 00 class 0x060000
[ 0.826207] pci 0000:00:0e.4: [8086:3439] type 00 class 0x060000
[ 0.826294] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[ 0.826383] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[ 0.826469] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[ 0.826566] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.826631] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.826698] pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400
[ 0.826763] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.826837] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.826899] pci 0000:00:1d.0: reg 0x20: [io 0x1000-0x101f]
[ 0.827006] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.827058] pci 0000:00:1d.1: reg 0x20: [io 0x1020-0x103f]
[ 0.827169] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.827232] pci 0000:00:1d.2: reg 0x20: [io 0x1040-0x105f]
[ 0.827343] pci 0000:00:1d.3: [8086:3a39] type 00 class 0x0c0300
[ 0.827406] pci 0000:00:1d.3: reg 0x20: [io 0x1060-0x107f]
[ 0.827525] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.827543] pci 0000:00:1d.7: reg 0x10: [mem 0xf1df0000-0xf1df03ff]
[ 0.827623] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.827684] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.827779] pci 0000:00:1f.0: [8086:3a18] type 00 class 0x060100
[ 0.827974] pci 0000:04:00.0: [103c:323a] type 00 class 0x010400
[ 0.827987] pci 0000:04:00.0: reg 0x10: [mem 0xfb800000-0xfbbfffff 64bit]
[ 0.827997] pci 0000:04:00.0: reg 0x18: [mem 0xfb7f0000-0xfb7f0fff 64bit]
[ 0.828003] pci 0000:04:00.0: reg 0x20: [io 0x4000-0x40ff]
[ 0.828015] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 0.828049] pci 0000:04:00.0: supports D1
[ 0.828050] pci 0000:04:00.0: PME# supported from D0
[ 0.835867] pci 0000:00:01.0: PCI bridge to [bus 04]
[ 0.836891] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.836894] pci 0000:00:01.0: bridge window [mem 0xfb700000-0xfbbfffff]
[ 0.836937] pci 0000:00:02.0: PCI bridge to [bus 05]
[ 0.838031] pci 0000:00:03.0: PCI bridge to [bus 10-12]
[ 0.839372] pci 0000:00:04.0: PCI bridge to [bus 13]
[ 0.840632] pci 0000:14:00.0: [1b4b:9125] type 00 class 0x010601
[ 0.840643] pci 0000:14:00.0: reg 0x10: [io 0x5000-0x5007]
[ 0.840650] pci 0000:14:00.0: reg 0x14: [io 0x5008-0x500b]
[ 0.840656] pci 0000:14:00.0: reg 0x18: [io 0x5010-0x5017]
[ 0.840662] pci 0000:14:00.0: reg 0x1c: [io 0x5018-0x501b]
[ 0.840668] pci 0000:14:00.0: reg 0x20: [io 0x5020-0x502f]
[ 0.840675] pci 0000:14:00.0: reg 0x24: [mem 0xfbff0000-0xfbff07ff]
[ 0.840681] pci 0000:14:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.840711] pci 0000:14:00.0: PME# supported from D3hot
[ 0.847859] pci 0000:00:05.0: PCI bridge to [bus 14-16]
[ 0.848957] pci 0000:00:05.0: bridge window [io 0x5000-0x5fff]
[ 0.848959] pci 0000:00:05.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.849054] pci 0000:00:06.0: PCI bridge to [bus 17-19]
[ 0.850314] pci 0000:00:07.0: PCI bridge to [bus 0d-0f]
[ 0.851507] pci 0000:00:08.0: PCI bridge to [bus 0a-0c]
[ 0.852704] pci 0000:00:09.0: PCI bridge to [bus 07-09]
[ 0.853995] pci 0000:00:0a.0: PCI bridge to [bus 06]
[ 0.855041] pci 0000:02:00.0: [14e4:1639] type 00 class 0x020000
[ 0.855063] pci 0000:02:00.0: reg 0x10: [mem 0xf4000000-0xf5ffffff 64bit]
[ 0.855108] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.855193] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.855260] pci 0000:02:00.1: [14e4:1639] type 00 class 0x020000
[ 0.855281] pci 0000:02:00.1: reg 0x10: [mem 0xf2000000-0xf3ffffff 64bit]
[ 0.855327] pci 0000:02:00.1: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.855411] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[ 0.859856] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.860823] pci 0000:00:1c.0: bridge window [mem 0xf2000000-0xf5ffffff]
[ 0.860896] pci 0000:03:00.0: [14e4:1639] type 00 class 0x020000
[ 0.860918] pci 0000:03:00.0: reg 0x10: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.860963] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.861047] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.861114] pci 0000:03:00.1: [14e4:1639] type 00 class 0x020000
[ 0.861135] pci 0000:03:00.1: reg 0x10: [mem 0xf6000000-0xf7ffffff 64bit]
[ 0.861180] pci 0000:03:00.1: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.861264] pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
[ 0.867851] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.869065] pci 0000:00:1c.2: bridge window [mem 0xf6000000-0xf9ffffff]
[ 0.869124] pci 0000:01:03.0: [1002:515e] type 00 class 0x030000
[ 0.869141] pci 0000:01:03.0: reg 0x10: [mem 0xe8000000-0xefffffff pref]
[ 0.869150] pci 0000:01:03.0: reg 0x14: [io 0x3000-0x30ff]
[ 0.869160] pci 0000:01:03.0: reg 0x18: [mem 0xf1ff0000-0xf1ffffff]
[ 0.869193] pci 0000:01:03.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.869222] pci 0000:01:03.0: supports D1 D2
[ 0.869265] pci 0000:01:04.0: [0e11:b203] type 00 class 0x088000
[ 0.869282] pci 0000:01:04.0: reg 0x10: [io 0x2800-0x28ff]
[ 0.869292] pci 0000:01:04.0: reg 0x14: [mem 0xf1fe0000-0xf1fe01ff]
[ 0.869358] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
[ 0.869413] pci 0000:01:04.2: [0e11:b204] type 00 class 0x088000
[ 0.869432] pci 0000:01:04.2: reg 0x10: [io 0x3400-0x34ff]
[ 0.869442] pci 0000:01:04.2: reg 0x14: [mem 0xf1fd0000-0xf1fd07ff]
[ 0.869452] pci 0000:01:04.2: reg 0x18: [mem 0xf1fc0000-0xf1fc3fff]
[ 0.869463] pci 0000:01:04.2: reg 0x1c: [mem 0xf1f00000-0xf1f7ffff]
[ 0.869492] pci 0000:01:04.2: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.869522] pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
[ 0.869574] pci 0000:01:04.4: [103c:3300] type 00 class 0x0c0300
[ 0.869629] pci 0000:01:04.4: reg 0x20: [io 0x3800-0x381f]
[ 0.869678] pci 0000:01:04.4: PME# supported from D0 D3hot D3cold
[ 0.869728] pci 0000:01:04.6: [103c:3302] type 00 class 0x0c0701
[ 0.869745] pci 0000:01:04.6: reg 0x10: [mem 0xf1ef0000-0xf1ef00ff]
[ 0.869820] pci 0000:01:04.6: PME# supported from D0 D3hot D3cold
[ 0.869894] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.871238] pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
[ 0.871241] pci 0000:00:1e.0: bridge window [mem 0xf1e00000-0xf1ffffff]
[ 0.871246] pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.871248] pci 0000:00:1e.0: bridge window [mem 0xe7000000-0xfbffffff] (subtractive decode)
[ 0.871249] pci 0000:00:1e.0: bridge window [io 0x1000-0x5fff] (subtractive decode)
[ 0.871251] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.871252] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.871253] pci 0000:00:1e.0: bridge window [io 0x0d00-0x0fff] (subtractive decode)
[ 0.871255] pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed44fff] (subtractive decode)
[ 0.871256] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03bb] (subtractive decode)
[ 0.871258] pci 0000:00:1e.0: bridge window [io 0x03c0-0x03df] (subtractive decode)
[ 0.871259] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.871551] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *7 10 11)
[ 0.873061] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11)
[ 0.874623] ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11)
[ 0.876118] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
[ 0.877701] ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11)
[ 0.879235] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 *10 11)
[ 0.880853] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
[ 0.882286] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11)
[ 0.883955] vgaarb: setting as boot device: PCI:0000:01:03.0
[ 0.885058] vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.886954] vgaarb: loaded
[ 0.889203] vgaarb: bridge control possible 0000:01:03.0
[ 0.890472] PCI: Using ACPI for IRQ routing
[ 0.892339] PCI: Discovered peer bus 3e
[ 0.893244] PCI: root bus 3e: using default resources
[ 0.893245] PCI: Probing PCI hardware (bus 3e)
[ 0.893274] PCI host bridge to bus 0000:3e
[ 0.894241] pci_bus 0000:3e: root bus resource [io 0x0000-0xffff]
[ 0.895660] pci_bus 0000:3e: root bus resource [mem 0x00000000-0xffffffffff]
[ 0.897361] pci_bus 0000:3e: No busn resource found for root bus, will use [bus 3e-ff]
[ 0.899048] pci 0000:3e:00.0: [8086:2c70] type 00 class 0x060000
[ 0.899092] pci 0000:3e:00.1: [8086:2d81] type 00 class 0x060000
[ 0.899134] pci 0000:3e:02.0: [8086:2d90] type 00 class 0x060000
[ 0.899174] pci 0000:3e:02.1: [8086:2d91] type 00 class 0x060000
[ 0.899214] pci 0000:3e:02.2: [8086:2d92] type 00 class 0x060000
[ 0.899255] pci 0000:3e:02.3: [8086:2d93] type 00 class 0x060000
[ 0.899295] pci 0000:3e:02.4: [8086:2d94] type 00 class 0x060000
[ 0.899336] pci 0000:3e:02.5: [8086:2d95] type 00 class 0x060000
[ 0.899378] pci 0000:3e:03.0: [8086:2d98] type 00 class 0x060000
[ 0.899420] pci 0000:3e:03.1: [8086:2d99] type 00 class 0x060000
[ 0.899461] pci 0000:3e:03.2: [8086:2d9a] type 00 class 0x060000
[ 0.899502] pci 0000:3e:03.4: [8086:2d9c] type 00 class 0x060000
[ 0.899542] pci 0000:3e:04.0: [8086:2da0] type 00 class 0x060000
[ 0.899583] pci 0000:3e:04.1: [8086:2da1] type 00 class 0x060000
[ 0.899622] pci 0000:3e:04.2: [8086:2da2] type 00 class 0x060000
[ 0.899662] pci 0000:3e:04.3: [8086:2da3] type 00 class 0x060000
[ 0.899703] pci 0000:3e:05.0: [8086:2da8] type 00 class 0x060000
[ 0.899742] pci 0000:3e:05.1: [8086:2da9] type 00 class 0x060000
[ 0.899781] pci 0000:3e:05.2: [8086:2daa] type 00 class 0x060000
[ 0.899825] pci 0000:3e:05.3: [8086:2dab] type 00 class 0x060000
[ 0.899866] pci 0000:3e:06.0: [8086:2db0] type 00 class 0x060000
[ 0.899907] pci 0000:3e:06.1: [8086:2db1] type 00 class 0x060000
[ 0.899947] pci 0000:3e:06.2: [8086:2db2] type 00 class 0x060000
[ 0.899988] pci 0000:3e:06.3: [8086:2db3] type 00 class 0x060000
[ 0.900039] pci_bus 0000:3e: busn_res: [bus 3e-ff] end is updated to 3e
[ 0.900043] PCI: Discovered peer bus 3f
[ 0.900981] PCI: root bus 3f: using default resources
[ 0.900982] PCI: Probing PCI hardware (bus 3f)
[ 0.901010] PCI host bridge to bus 0000:3f
[ 0.901976] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
[ 0.903361] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xffffffffff]
[ 0.904885] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
[ 0.906468] pci 0000:3f:00.0: [8086:2c70] type 00 class 0x060000
[ 0.906508] pci 0000:3f:00.1: [8086:2d81] type 00 class 0x060000
[ 0.906550] pci 0000:3f:02.0: [8086:2d90] type 00 class 0x060000
[ 0.906589] pci 0000:3f:02.1: [8086:2d91] type 00 class 0x060000
[ 0.906629] pci 0000:3f:02.2: [8086:2d92] type 00 class 0x060000
[ 0.906668] pci 0000:3f:02.3: [8086:2d93] type 00 class 0x060000
[ 0.906706] pci 0000:3f:02.4: [8086:2d94] type 00 class 0x060000
[ 0.906745] pci 0000:3f:02.5: [8086:2d95] type 00 class 0x060000
[ 0.906783] pci 0000:3f:03.0: [8086:2d98] type 00 class 0x060000
[ 0.906822] pci 0000:3f:03.1: [8086:2d99] type 00 class 0x060000
[ 0.906859] pci 0000:3f:03.2: [8086:2d9a] type 00 class 0x060000
[ 0.906898] pci 0000:3f:03.4: [8086:2d9c] type 00 class 0x060000
[ 0.906936] pci 0000:3f:04.0: [8086:2da0] type 00 class 0x060000
[ 0.906974] pci 0000:3f:04.1: [8086:2da1] type 00 class 0x060000
[ 0.907011] pci 0000:3f:04.2: [8086:2da2] type 00 class 0x060000
[ 0.907049] pci 0000:3f:04.3: [8086:2da3] type 00 class 0x060000
[ 0.907087] pci 0000:3f:05.0: [8086:2da8] type 00 class 0x060000
[ 0.907124] pci 0000:3f:05.1: [8086:2da9] type 00 class 0x060000
[ 0.907161] pci 0000:3f:05.2: [8086:2daa] type 00 class 0x060000
[ 0.907198] pci 0000:3f:05.3: [8086:2dab] type 00 class 0x060000
[ 0.907237] pci 0000:3f:06.0: [8086:2db0] type 00 class 0x060000
[ 0.907275] pci 0000:3f:06.1: [8086:2db1] type 00 class 0x060000
[ 0.907311] pci 0000:3f:06.2: [8086:2db2] type 00 class 0x060000
[ 0.907350] pci 0000:3f:06.3: [8086:2db3] type 00 class 0x060000
[ 0.907397] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
[ 0.907400] PCI: pci_cache_line_size set to 64 bytes
[ 0.907514] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.907516] e820: reserve RAM buffer [mem 0xdf61f000-0xdfffffff]
[ 0.907517] e820: reserve RAM buffer [mem 0xdf62d000-0xdfffffff]
[ 0.907519] e820: reserve RAM buffer [mem 0x121ffff000-0x121fffffff]
[ 0.907683] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.908991] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.912381] amd_nb: Cannot enumerate AMD northbridges
[ 0.913716] Switched to clocksource hpet
[ 0.920232] pnp: PnP ACPI init
[ 0.920997] ACPI: bus type PNP registered
[ 0.922136] system 00:00: [io 0x0408-0x040f] has been reserved
[ 0.923512] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.924756] system 00:00: [io 0x0700-0x071f] has been reserved
[ 0.925959] system 00:00: [io 0x0880-0x08ff] has been reserved
[ 0.927411] system 00:00: [io 0x0900-0x097f] has been reserved
[ 0.928811] system 00:00: [io 0x0c80-0x0c83] has been reserved
[ 0.930162] system 00:00: [io 0x0cd4-0x0cd7] has been reserved
[ 0.931512] system 00:00: [io 0x0f50-0x0f58] has been reserved
[ 0.932755] system 00:00: [io 0x0ca0-0x0ca1] has been reserved
[ 0.934156] system 00:00: [io 0x0ca4-0x0ca5] has been reserved
[ 0.935547] system 00:00: [io 0x03f8-0x03ff] has been reserved
[ 0.936781] system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.938112] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[ 0.939557] system 00:00: [mem 0xe7ffe000-0xe7ffffff] could not be reserved
[ 0.941164] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.941194] pnp 00:01: Plug and Play ACPI device, IDs IPI0001 (active)
[ 0.941236] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.941266] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[ 0.941452] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[ 0.941510] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.941631] pnp: PnP ACPI: found 6 devices
[ 0.942637] ACPI: bus type PNP unregistered
[ 0.950855] pci 0000:04:00.0: BAR 6: assigned [mem 0xfb700000-0xfb77ffff pref]
[ 0.952338] pci 0000:00:01.0: PCI bridge to [bus 04]
[ 0.953531] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.954968] pci 0000:00:01.0: bridge window [mem 0xfb700000-0xfbbfffff]
[ 0.956301] pci 0000:00:02.0: PCI bridge to [bus 05]
[ 0.957418] pci 0000:00:03.0: PCI bridge to [bus 10-12]
[ 0.958680] pci 0000:00:04.0: PCI bridge to [bus 13]
[ 0.959733] pci 0000:14:00.0: BAR 6: assigned [mem 0xfbf00000-0xfbf0ffff pref]
[ 0.961317] pci 0000:00:05.0: PCI bridge to [bus 14-16]
[ 0.962519] pci 0000:00:05.0: bridge window [io 0x5000-0x5fff]
[ 0.963955] pci 0000:00:05.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.965499] pci 0000:00:06.0: PCI bridge to [bus 17-19]
[ 0.966696] pci 0000:00:07.0: PCI bridge to [bus 0d-0f]
[ 0.967793] pci 0000:00:08.0: PCI bridge to [bus 0a-0c]
[ 0.968877] pci 0000:00:09.0: PCI bridge to [bus 07-09]
[ 0.969941] pci 0000:00:0a.0: PCI bridge to [bus 06]
[ 0.971109] pci 0000:02:00.0: BAR 6: can't assign mem pref (size 0x10000)
[ 0.972589] pci 0000:02:00.1: BAR 6: can't assign mem pref (size 0x10000)
[ 0.973959] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.975145] pci 0000:00:1c.0: bridge window [mem 0xf2000000-0xf5ffffff]
[ 0.976741] pci 0000:03:00.0: BAR 6: can't assign mem pref (size 0x10000)
[ 0.978334] pci 0000:03:00.1: BAR 6: can't assign mem pref (size 0x10000)
[ 0.979772] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.981046] pci 0000:00:1c.2: bridge window [mem 0xf6000000-0xf9ffffff]
[ 0.982508] pci 0000:01:03.0: BAR 6: assigned [mem 0xf1e00000-0xf1e1ffff pref]
[ 0.983989] pci 0000:01:04.2: BAR 6: assigned [mem 0xf1e20000-0xf1e2ffff pref]
[ 0.985624] pci 0000:00:1e.0: PCI bridge to [bus 01]
[ 0.986678] pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
[ 0.988114] pci 0000:00:1e.0: bridge window [mem 0xf1e00000-0xf1ffffff]
[ 0.989592] pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.991431] pci_bus 0000:00: resource 4 [mem 0xe7000000-0xfbffffff]
[ 0.991433] pci_bus 0000:00: resource 5 [io 0x1000-0x5fff]
[ 0.991434] pci_bus 0000:00: resource 6 [io 0x0000-0x03af]
[ 0.991436] pci_bus 0000:00: resource 7 [io 0x03e0-0x0cf7]
[ 0.991437] pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff]
[ 0.991439] pci_bus 0000:00: resource 9 [mem 0xfed00000-0xfed44fff]
[ 0.991440] pci_bus 0000:00: resource 10 [io 0x03b0-0x03bb]
[ 0.991441] pci_bus 0000:00: resource 11 [io 0x03c0-0x03df]
[ 0.991443] pci_bus 0000:00: resource 12 [mem 0x000a0000-0x000bffff]
[ 0.991444] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
[ 0.991446] pci_bus 0000:04: resource 1 [mem 0xfb700000-0xfbbfffff]
[ 0.991448] pci_bus 0000:14: resource 0 [io 0x5000-0x5fff]
[ 0.991449] pci_bus 0000:14: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.991451] pci_bus 0000:02: resource 1 [mem 0xf2000000-0xf5ffffff]
[ 0.991453] pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf9ffffff]
[ 0.991454] pci_bus 0000:01: resource 0 [io 0x2000-0x3fff]
[ 0.991456] pci_bus 0000:01: resource 1 [mem 0xf1e00000-0xf1ffffff]
[ 0.991457] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.991459] pci_bus 0000:01: resource 4 [mem 0xe7000000-0xfbffffff]
[ 0.991460] pci_bus 0000:01: resource 5 [io 0x1000-0x5fff]
[ 0.991461] pci_bus 0000:01: resource 6 [io 0x0000-0x03af]
[ 0.991463] pci_bus 0000:01: resource 7 [io 0x03e0-0x0cf7]
[ 0.991464] pci_bus 0000:01: resource 8 [io 0x0d00-0x0fff]
[ 0.991466] pci_bus 0000:01: resource 9 [mem 0xfed00000-0xfed44fff]
[ 0.991467] pci_bus 0000:01: resource 10 [io 0x03b0-0x03bb]
[ 0.991469] pci_bus 0000:01: resource 11 [io 0x03c0-0x03df]
[ 0.991470] pci_bus 0000:01: resource 12 [mem 0x000a0000-0x000bffff]
[ 0.991473] pci_bus 0000:3e: resource 4 [io 0x0000-0xffff]
[ 0.991475] pci_bus 0000:3e: resource 5 [mem 0x00000000-0xffffffffff]
[ 0.991477] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
[ 0.991479] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xffffffffff]
[ 0.991663] NET: Registered protocol family 2
[ 0.993341] TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.995864] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.997738] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.999232] TCP: reno registered
[ 1.000006] UDP hash table entries: 65536 (order: 9, 2097152 bytes)
[ 1.001949] UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)
[ 1.003834] NET: Registered protocol family 1
[ 1.021790] pci 0000:01:03.0: Video device with shadowed ROM
[ 1.022549] PCI: CLS 64 bytes, default 64
[ 1.022610] Unpacking initramfs...
[ 1.379360] Freeing initrd memory: 18312K (ffff880035c2c000 - ffff880036e0e000)
[ 1.381004] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.382479] software IO TLB [mem 0xdb61f000-0xdf61f000] (64MB) mapped at [ffff8800db61f000-ffff8800df61efff]
[ 1.385282] microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x1a
[ 1.386472] microcode: CPU1 sig=0x206c2, pf=0x1, revision=0x1a
[ 1.387629] microcode: CPU2 sig=0x206c2, pf=0x1, revision=0x1a
[ 1.388946] microcode: CPU3 sig=0x206c2, pf=0x1, revision=0x1a
[ 1.390181] microcode: CPU4 sig=0x206c2, pf=0x1, revision=0x1a
[ 1.391422] microcode: CPU5 sig=0x206c2, pf=0x1, revision=0x1a
[ 1.392810] microcode: CPU6 sig=0x206c2, pf=0x1, revision=0x1a
[ 1.393926] microcode: CPU7 sig=0x206c2, pf=0x1, revision=0x1a
[ 1.395231] microcode: CPU8 sig=0x206c2, pf=0x1, revision=0x1a
[ 1.396421] microcode: CPU9 sig=0x206c2, pf=0x1, revision=0x1a
[ 1.397745] microcode: CPU10 sig=0x206c2, pf=0x1, revision=0x1a
[ 1.399038] microcode: CPU11 sig=0x206c2, pf=0x1, revision=0x1a
[ 1.400262] microcode: CPU12 sig=0x206c2, pf=0x1, revision=0x1a
[ 1.401445] microcode: CPU13 sig=0x206c2, pf=0x1, revision=0x1a
[ 1.402803] microcode: CPU14 sig=0x206c2, pf=0x1, revision=0x1a
[ 1.404141] microcode: CPU15 sig=0x206c2, pf=0x1, revision=0x1a
[ 1.405475] microcode: CPU16 sig=0x206c2, pf=0x1, revision=0x1a
[ 1.406805] microcode: CPU17 sig=0x206c2, pf=0x1, revision=0x1a
[ 1.408085] microcode: CPU18 sig=0x206c2, pf=0x1, revision=0x1a
[ 1.409325] microcode: CPU19 sig=0x206c2, pf=0x1, revision=0x1a
[ 1.410481] microcode: CPU20 sig=0x206c2, pf=0x1, revision=0x1a
[ 1.411615] microcode: CPU21 sig=0x206c2, pf=0x1, revision=0x1a
[ 1.412980] microcode: CPU22 sig=0x206c2, pf=0x1, revision=0x1a
[ 1.414072] microcode: CPU23 sig=0x206c2, pf=0x1, revision=0x1a
[ 1.415490] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.418770] audit: initializing netlink subsys (disabled)
[ 1.420005] audit: type=2000 audit(1512974502.272:1): initialized
[ 1.422064] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.423537] zbud: loaded
[ 1.424575] VFS: Disk quotas dquot_6.5.2
[ 1.425445] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.427064] msgmni has been set to 32768
[ 1.428454] alg: No test for stdrng (krng)
[ 1.429316] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.431114] io scheduler noop registered
[ 1.432022] io scheduler deadline registered
[ 1.433093] io scheduler cfq registered (default)
[ 1.434988] pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
[ 1.435247] pcieport 0000:00:1c.2: irq 65 for MSI/MSI-X
[ 1.435396] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.436528] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.438020] intel_idle: MWAIT substates: 0x1120
[ 1.438022] intel_idle: v0.4 model 0x2C
[ 1.438024] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.439470] ERST: Failed to get Error Log Address Range.
[ 1.440593] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
[ 1.442113] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.463791] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 1.485622] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.487551] Linux agpgart interface v0.103
[ 1.488768] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 1.492347] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.493501] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.494631] mousedev: PS/2 mouse device common for all mice
[ 1.495711] rtc_cmos 00:05: RTC can wake from S4
[ 1.496864] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.498190] rtc_cmos 00:05: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.500004] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.502526] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 1.503757] AMD IOMMUv2 functionality not available on this system
[ 1.505278] TCP: cubic registered
[ 1.506284] NET: Registered protocol family 10
[ 1.507819] mip6: Mobile IPv6
[ 1.508517] NET: Registered protocol family 17
[ 1.509453] mpls_gso: MPLS GSO support
[ 1.511668] registered taskstats version 1
[ 1.514927] rtc_cmos 00:05: setting system clock to 2017-12-11 06:41:43 UTC (1512974503)
[ 1.516849] PM: Hibernation image not present or could not be loaded.
[ 1.521361] Freeing unused kernel memory: 1208K (ffffffff818ef000 - ffffffff81a1d000)
[ 1.522817] Write protecting the kernel read-only data: 8192k
[ 1.529170] Freeing unused kernel memory: 888K (ffff880001522000 - ffff880001600000)
[ 1.533383] Freeing unused kernel memory: 212K (ffff8800017cb000 - ffff880001800000)
[ 1.550232] systemd-udevd[175]: starting version 215
[ 1.551672] random: systemd-udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[ 1.577295] Floppy drive(s): fd0 is 1.44M
[ 1.583127] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.584306] ACPI: Thermal Zone [THM0] (8 C)
[ 1.586131] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.5 (December 20, 2013)
[ 1.586177] ACPI: bus type USB registered
[ 1.586235] usbcore: registered new interface driver usbfs
[ 1.586256] usbcore: registered new interface driver hub
[ 1.586315] usbcore: registered new device driver usb
[ 1.592492] SCSI subsystem initialized
[ 1.593321] bnx2 0000:02:00.0 eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f4000000, IRQ 16, node addr 3c:4a:92:6f:ac:b8
[ 1.597332] bnx2 0000:02:00.1 eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f2000000, IRQ 17, node addr 3c:4a:92:6f:ac:ba
[ 1.602265] HP HPSA Driver (v 3.4.4-1)
[ 1.602449] bnx2 0000:03:00.0 eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f8000000, IRQ 18, node addr 3c:4a:92:6f:ac:bc
[ 1.603301] bnx2 0000:03:00.1 eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f6000000, IRQ 19, node addr 3c:4a:92:6f:ac:be
[ 1.608507] hpsa 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.610241] hpsa 0000:04:00.0: MSIX
[ 1.611066] hpsa 0000:04:00.0: only 16 MSI-X vectors available
[ 1.612283] hpsa 0000:04:00.0: irq 66 for MSI/MSI-X
[ 1.612291] hpsa 0000:04:00.0: irq 67 for MSI/MSI-X
[ 1.612303] hpsa 0000:04:00.0: irq 68 for MSI/MSI-X
[ 1.612312] hpsa 0000:04:00.0: irq 69 for MSI/MSI-X
[ 1.612320] hpsa 0000:04:00.0: irq 70 for MSI/MSI-X
[ 1.612327] hpsa 0000:04:00.0: irq 71 for MSI/MSI-X
[ 1.612335] hpsa 0000:04:00.0: irq 72 for MSI/MSI-X
[ 1.612343] hpsa 0000:04:00.0: irq 73 for MSI/MSI-X
[ 1.612351] hpsa 0000:04:00.0: irq 74 for MSI/MSI-X
[ 1.612358] hpsa 0000:04:00.0: irq 75 for MSI/MSI-X
[ 1.612367] hpsa 0000:04:00.0: irq 76 for MSI/MSI-X
[ 1.612375] hpsa 0000:04:00.0: irq 77 for MSI/MSI-X
[ 1.612382] hpsa 0000:04:00.0: irq 78 for MSI/MSI-X
[ 1.612390] hpsa 0000:04:00.0: irq 79 for MSI/MSI-X
[ 1.612397] hpsa 0000:04:00.0: irq 80 for MSI/MSI-X
[ 1.612405] hpsa 0000:04:00.0: irq 81 for MSI/MSI-X
[ 1.612476] hpsa 0000:04:00.0: Logical aborts not supported
[ 1.615273] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.615470] libata version 3.00 loaded.
[ 1.621469] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.621479] ehci-pci: EHCI PCI platform driver
[ 1.621706] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.621715] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.621732] ehci-pci 0000:00:1d.7: debug port 1
[ 1.625634] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.625654] ehci-pci 0000:00:1d.7: irq 20, io mem 0xf1df0000
[ 1.633564] ahci 0000:14:00.0: version 3.0
[ 1.633672] ahci 0000:14:00.0: irq 82 for MSI/MSI-X
[ 1.633715] ahci 0000:14:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.633732] hpsa 0000:04:00.0: hpsa0: <0x323a> at IRQ 66 using DAC
[ 1.636859] ahci 0000:14:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.637368] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.637427] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.637429] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.637430] usb usb1: Product: EHCI Host Controller
[ 1.637432] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 1.637433] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.637685] hub 1-0:1.0: USB hub found
[ 1.637693] hub 1-0:1.0: 8 ports detected
[ 1.638137] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.638147] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.638155] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.638177] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001000
[ 1.638244] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.638246] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.638248] usb usb2: Product: UHCI Host Controller
[ 1.638250] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
[ 1.638251] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.638479] hub 2-0:1.0: USB hub found
[ 1.638485] hub 2-0:1.0: 2 ports detected
[ 1.638769] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.638776] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.638783] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.638814] uhci_hcd 0000:00:1d.1: irq 23, io base 0x00001020
[ 1.638870] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.638872] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.638873] usb usb3: Product: UHCI Host Controller
[ 1.638875] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
[ 1.638876] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.639132] hub 3-0:1.0: USB hub found
[ 1.639138] hub 3-0:1.0: 2 ports detected
[ 1.639391] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.639398] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.639404] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.639435] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001040
[ 1.639488] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.639490] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.639492] usb usb4: Product: UHCI Host Controller
[ 1.639494] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
[ 1.639495] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.639690] hub 4-0:1.0: USB hub found
[ 1.639698] hub 4-0:1.0: 2 ports detected
[ 1.639956] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.639962] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.639969] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 1.639989] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001060
[ 1.640044] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.640047] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.640049] usb usb5: Product: UHCI Host Controller
[ 1.640050] usb usb5: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
[ 1.640052] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.640248] hub 5-0:1.0: USB hub found
[ 1.640255] hub 5-0:1.0: 2 ports detected
[ 1.640440] uhci_hcd 0000:01:04.4: UHCI Host Controller
[ 1.640446] uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 6
[ 1.640460] uhci_hcd 0000:01:04.4: detected 8 ports
[ 1.640461] uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
[ 1.641168] uhci_hcd 0000:01:04.4: irq 22, io base 0x00003800
[ 1.641391] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.641393] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.641394] usb usb6: Product: UHCI Host Controller
[ 1.641396] usb usb6: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
[ 1.641398] usb usb6: SerialNumber: 0000:01:04.4
[ 1.641581] hub 6-0:1.0: USB hub found
[ 1.641587] hub 6-0:1.0: 2 ports detected
[ 1.655175] scsi0 : hpsa
[ 1.719673] ahci 0000:14:00.0: port 0 can do FBS, forcing FBSCP
[ 1.721049] ahci 0000:14:00.0: port 1 can do FBS, forcing FBSCP
[ 1.722966] scsi1 : ahci
[ 1.723935] scsi2 : ahci
[ 1.724844] ata1: SATA max UDMA/133 abar m2048@0xfbff0000 port 0xfbff0100 irq 82
[ 1.725010] hpsa 0000:04:00.0: RAID device c0b3t0l0 added.
[ 1.725013] hpsa 0000:04:00.0: Direct-Access device c0b0t0l0 added.
[ 1.725289] scsi 0:3:0:0: RAID HP P410i 3.52 PQ: 0 ANSI: 5
[ 1.725770] scsi 0:0:0:0: Direct-Access HP LOGICAL VOLUME 3.52 PQ: 0 ANSI: 5
[ 1.733244] ata2: SATA max UDMA/133 abar m2048@0xfbff0000 port 0xfbff0180 irq 82
[ 1.745178] scsi 0:3:0:0: Attached scsi generic sg0 type 12
[ 1.746603] scsi 0:0:0:0: Attached scsi generic sg1 type 0
[ 1.755484] sd 0:0:0:0: [sda] 15627854000 512-byte logical blocks: (8.00 TB/7.27 TiB)
[ 1.757581] sd 0:0:0:0: [sda] Write Protect is off
[ 1.758682] sd 0:0:0:0: [sda] Mode Sense: 6b 00 00 08
[ 1.758935] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 1.793020] sda: sda1 sda2 sda3
[ 1.795297] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.953287] usb 6-1: new full-speed USB device number 2 using uhci_hcd
[ 2.103984] usb 6-1: New USB device found, idVendor=03f0, idProduct=1027
[ 2.105311] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.106645] usb 6-1: Product: Virtual Keyboard
[ 2.107739] usb 6-1: Manufacturer: HP
[ 2.124418] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.141948] usbcore: registered new interface driver usbhid
[ 2.143099] usbhid: USB HID core driver
[ 2.151505] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.0/0003:03F0:1027.0001/input/input3
[ 2.154187] hid-generic 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0
[ 2.157242] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.1/0003:03F0:1027.0002/input/input4
[ 2.160028] hid-generic 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1
[ 2.225057] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[ 2.226508] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[ 2.238767] ata2.00: ATA-8: KINGSTON SH103S3240G, 580ABBF0, max UDMA/133
[ 2.240364] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.242265] ata1.00: ATA-8: KINGSTON SH103S3240G, 580ABBF0, max UDMA/133
[ 2.243867] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.248453] ata2.00: configured for UDMA/133
[ 2.249734] ata1.00: configured for UDMA/133
[ 2.250967] scsi 1:0:0:0: Direct-Access ATA KINGSTON SH103S3 BBF0 PQ: 0 ANSI: 5
[ 2.253068] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 2.253081] sd 1:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/223 GiB)
[ 2.253654] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.253657] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.253835] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.258862] scsi 2:0:0:0: Direct-Access ATA KINGSTON SH103S3 BBF0 PQ: 0 ANSI: 5
[ 2.258881] sdb: unknown partition table
[ 2.259762] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.262865] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 2.262886] sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/223 GiB)
[ 2.263396] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.263399] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.263557] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.264562] sdc: unknown partition table
[ 2.264736] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 2.291214] device-mapper: uevent: version 1.0.3
[ 2.293695] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 2.381041] tsc: Refined TSC clocksource calibration: 2932.499 MHz
[ 3.380837] Switched to clocksource tsc
[ 4.595857] floppy0: no floppy controllers found
[ 4.762297] random: lvm: uninitialized urandom read (4 bytes read, 98 bits of entropy available)
[ 4.803240] random: lvm: uninitialized urandom read (2 bytes read, 109 bits of entropy available)
[ 4.924453] random: lvm: uninitialized urandom read (4 bytes read, 119 bits of entropy available)
[ 4.937837] random: nonblocking pool is initialized
[ 5.139452] raid6: sse2x1 3945 MB/s
[ 5.207429] raid6: sse2x2 4628 MB/s
[ 5.275348] raid6: sse2x4 5153 MB/s
[ 5.276160] raid6: using algorithm sse2x4 (5153 MB/s)
[ 5.277212] raid6: using ssse3x2 recovery algorithm
[ 5.284662] xor: measuring software checksum speed
[ 5.323311] prefetch64-sse: 12324.000 MB/sec
[ 5.363319] generic_sse: 10861.000 MB/sec
[ 5.364309] xor: using function: prefetch64-sse (12324.000 MB/sec)
[ 5.392482] Btrfs loaded
[ 5.463286] PM: Starting manual resume from disk
[ 5.464202] PM: Hibernation image partition 254:1 present
[ 5.464203] PM: Looking for hibernation image.
[ 5.464740] PM: Image not found (code -22)
[ 5.464743] PM: Hibernation image not present or could not be loaded.
[ 5.546504] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 6.757627] systemd-udevd[522]: starting version 215
[ 7.212938] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 7.214371] ACPI: Power Button [PWRF]
[ 7.261402] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.283342] EDAC MC: Ver: 3.0.0
[ 7.327819] EDAC MC1: Giving out device to module i7core_edac.c controller i7 core #1: DEV 0000:3e:03.0 (POLLED)
[ 7.330189] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3e:03.0 (POLLED)
[ 7.332828] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED)
[ 7.334884] EDAC PCI1: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
[ 7.337554] EDAC i7core: Driver loaded, 2 memory controller(s) found.
[ 7.393202] ACPI Warning: SystemIO range 0x0000000000000928-0x000000000000092F conflicts with OpRegion 0x0000000000000920-0x000000000000092F (\SGPE) (20140424/utaddress-254)
[ 7.396806] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.399126] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 7.417354] hpwdt 0000:01:04.0: HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 0/OFF)
[ 7.420034] hpwdt 0000:01:04.0: HP Watchdog Timer Driver: 1.3.3, timer margin: 30 seconds (nowayout=0).
[ 7.435222] ipmi message handler version 39.2
[ 7.459352] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 7.481826] Floppy drive(s): fd0 is 1.44M
[ 7.494573] IPMI System Interface driver.
[ 7.495553] ipmi_si 0000:01:04.6: probing via PCI
[ 7.496728] ipmi_si 0000:01:04.6: [mem 0xf1ef0000-0xf1ef00ff] regsize 1 spacing 1 irq 21
[ 7.498285] ipmi_si: Adding PCI-specified kcs state machine
[ 7.499463] ipmi_si: probing via ACPI
[ 7.500326] ipmi_si 00:01: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
[ 7.501599] ipmi_si: Adding ACPI-specified kcs state machine
[ 7.502763] ipmi_si: probing via SMBIOS
[ 7.503715] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 7.505110] ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
[ 7.506727] ipmi_si: probing via SPMI
[ 7.507592] ipmi_si: SPMI: io 0xca2 regsize 2 spacing 2 irq 0
[ 7.508975] ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
[ 7.510830] ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf1ef0000, slave address 0x0, irq 21
[ 7.619877] iTCO_vendor_support: vendor-support=0
[ 7.659358] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 7.660739] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 7.693440] SSE version of gcm_enc/dec engaged.
[ 7.698773] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 7.722148] [drm] Initialized drm 1.1.0 20060810
[ 7.739235] alg: No test for crc32 (crc32-pclmul)
[ 7.854042] ipmi_si 0000:01:04.6: Using irq 21
[ 7.920156] [drm] VGACON disable radeon kernel modesetting.
[ 7.921429] [drm:radeon_init] *ERROR* No UMS support in radeon module!
[ 7.957264] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 7.967402] ipmi_si 0000:01:04.6: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x11)
[ 7.969236] ipmi_si 0000:01:04.6: IPMI kcs interface initialized
[ 10.504637] floppy0: no floppy controllers found
[ 10.856537] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 10.959494] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 11.162287] fuse init (API version 7.23)
[ 11.222762] loop: module loaded
[ 11.262901] sdc: unknown partition table
[ 11.264792] md: bind<sdc>
[ 11.265479] sdb: unknown partition table
[ 11.266469] md: bind<sdb>
[ 11.267147] sdb: unknown partition table
[ 11.296399] md: raid1 personality registered for level 1
[ 11.300154] md/raid1:md127: active with 2 out of 2 mirrors
[ 11.301456] md127: detected capacity change from 0 to 239923036160
[ 11.303041] md127: p1 p2
[ 11.338853] Bridge firewalling registered
[ 12.052908] BTRFS: device label home devid 1 transid 9058 /dev/dm-7
[ 12.135878] BTRFS: device label backup devid 1 transid 50238 /dev/dm-6
[ 12.247316] BTRFS: device label inovio devid 1 transid 1506345 /dev/dm-5
[ 12.273357] BTRFS: device label DISKY devid 1 transid 1812266 /dev/dm-4
[ 12.317776] Adding 10485756k swap on /dev/mapper/server-swap_1. Priority:-1 extents:1 across:10485756k FS
[ 12.456998] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[ 12.459579] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[ 12.464114] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 12.468286] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 12.470849] BTRFS info (device dm-4): setting nodatacow, compression disabled
[ 12.472379] BTRFS info (device dm-4): disk space caching is enabled
[ 15.114051] BTRFS info (device dm-7): disk space caching is enabled
[ 15.309998] BTRFS info (device dm-5): disk space caching is enabled
[ 16.229574] bnx2 0000:02:00.0: firmware: direct-loading firmware bnx2/bnx2-mips-09-6.2.1b.fw
[ 16.231708] bnx2 0000:02:00.0: firmware: direct-loading firmware bnx2/bnx2-rv2p-09-6.0.17.fw
[ 16.233582] bnx2 0000:02:00.0: irq 83 for MSI/MSI-X
[ 16.233591] bnx2 0000:02:00.0: irq 84 for MSI/MSI-X
[ 16.233599] bnx2 0000:02:00.0: irq 85 for MSI/MSI-X
[ 16.233606] bnx2 0000:02:00.0: irq 86 for MSI/MSI-X
[ 16.233614] bnx2 0000:02:00.0: irq 87 for MSI/MSI-X
[ 16.233621] bnx2 0000:02:00.0: irq 88 for MSI/MSI-X
[ 16.233628] bnx2 0000:02:00.0: irq 89 for MSI/MSI-X
[ 16.233636] bnx2 0000:02:00.0: irq 90 for MSI/MSI-X
[ 16.233643] bnx2 0000:02:00.0: irq 91 for MSI/MSI-X
[ 16.294962] bnx2 0000:02:00.0 eth0: using MSIX
[ 16.296125] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.933388] device dummy0 entered promiscuous mode
[ 17.945787] br0: port 1(dummy0) entered forwarding state
[ 17.947044] br0: port 1(dummy0) entered forwarding state
[ 17.974834] BTRFS info (device dm-6): disk space caching is enabled
[ 19.527854] bnx2 0000:02:00.0 eth0: NIC Copper Link is Up, 1000 Mbps full duplex
[ 19.529756] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 28.379981] RPC: Registered named UNIX socket transport module.
[ 28.381116] RPC: Registered udp transport module.
[ 28.382015] RPC: Registered tcp transport module.
[ 28.383154] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 28.414492] FS-Cache: Loaded
[ 28.473255] FS-Cache: Netfs 'nfs' registered for caching
[ 28.538288] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 29.845691] audit: type=1305 audit(1512974531.619:2): audit_pid=2272 old=0 auid=4294967295 ses=4294967295 res=1
[ 31.255815] ipmi device interface
[ 32.988308] br0: port 1(dummy0) entered forwarding state
[ 37.969645] tun: Universal TUN/TAP device driver, 1.6
[ 37.970905] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 46.802757] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 46.825642] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 51.307479] IPv6: ADDRCONF(NETDEV_UP): tap0: link is not ready
[ 51.310953] device tap0 entered promiscuous mode
[ 53.846465] IPv6: ADDRCONF(NETDEV_CHANGE): tap0: link becomes ready
[ 53.847727] br0: port 2(tap0) entered forwarding state
[ 53.848874] br0: port 2(tap0) entered forwarding state
[ 54.891874] kvm: zapping shadow pages for mmio generation wraparound
[ 54.892636] kvm: zapping shadow pages for mmio generation wraparound
[ 54.899919] kvm: zapping shadow pages for mmio generation wraparound
[ 54.931720] kvm: zapping shadow pages for mmio generation wraparound
[ 57.845672] kvm: zapping shadow pages for mmio generation wraparound
[ 68.872820] br0: port 2(tap0) entered forwarding state
# cat /etc/apt/sources.list
deb http://ftp.cz.debian.org/debian jessie main non-free contrib
deb http://security.debian.org jessie/updates main contrib non-free
deb http://ftp.cz.debian.org/debian jessie-updates main contrib non-free
######################################
deb http://debian.mirror.dkm.cz/debian/ jessie main non-free contrib
### HW RAID HP
deb http://hwraid.le-vert.net/debian jessie main
# deb http://hwraid.le-vert.net/debian wheezy main
### HW HEALTH CLI
deb http://downloads.linux.hpe.com/SDR/repo/mcp/ jessie/current non-free
# deb http://downloads.linux.hpe.com/SDR/repo/mcp/ wheezy/current non-free
# Let's Encrypt SSL certificates
deb http://ftp.cz.debian.org/debian jessie-backports main
Regards,
Tomas Thiemel
Reply to: