Bug#853122: sp5100_tco: I/O address 0x0cd6 already in use
Package: src:linux
Version: 4.9.30-2+deb9u5
Followup-For: Bug #853122
Dear Maintainer,
I made a fresh install of Debian Stretch 9.1 (x64) 2 weeks ago, as a
replacement of a faultless Jessie, up-to-date on the same x64 box (AMD CPU, ATI
GPU & Gigabyte MoBo).
Despite basic configuration, I did encouter the same failure at each boot :
[ 2.878615] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 2.878670] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision
ID: 0x42
[ 2.878673] sp5100_tco: I/O address 0x0cd6 already in use
As I've found this a well-known bug but with not enough attention.
https://bugzilla.redhat.com/show_bug.cgi?id=1406844
I would like to point that this error may be linked to a very nasty bug when I
use some desktop environment, as MATE or XFCE : each time the monitor goes to
standby mode by itself, I can't get it back, the screen stays black and the
system stays responseless for minutes before I have to hard reboot.
Therefore, I've to be very careful and intentionnaly screenlock my DE to avoid
that kind of issue, with little consequences only because of ext4 resilience...
I'd like to stress this bug may not be completely harmless & should be treated.
Regards,
Yoj'
-- Package-specific info:
** Version:
Linux version 4.9.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u5 (2017-09-19)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=afaa4f9e-82f3-4613-adbf-31a1bd744f4a ro iommu=soft quiet
** Not tainted
** Kernel log:
Unable to read kernel log; any relevant messages should be attached
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: To be filled by O.E.M.
product_version: To be filled by O.E.M.
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: F1
board_vendor: Gigabyte Technology Co., Ltd.
board_name: 970A-DS3P
board_version: x.x
** Loaded modules:
fuse
snd_hrtimer
snd_seq
snd_seq_device
uinput
cpufreq_conservative
cpufreq_powersave
cpufreq_userspace
binfmt_misc
nls_ascii
nls_cp437
vfat
fat
edac_mce_amd
edac_core
kvm_amd
kvm
irqbypass
crct10dif_pclmul
amdkfd
crc32_pclmul
snd_hda_codec_realtek
snd_hda_codec_generic
radeon
efi_pstore
ttm
drm_kms_helper
snd_hda_codec_hdmi
evdev
ghash_clmulni_intel
serio_raw
efivars
snd_hda_intel
pcspkr
drm
snd_hda_codec
snd_hda_core
snd_hwdep
i2c_algo_bit
snd_pcm
snd_timer
fam15h_power
snd
k10temp
sg
shpchp
soundcore
sp5100_tco
button
acpi_cpufreq
parport_pc
ppdev
lp
parport
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
jbd2
crc32c_generic
fscrypto
ecb
mbcache
hid_generic
usbhid
hid
sr_mod
cdrom
sd_mod
ata_generic
ohci_pci
crc32c_intel
aesni_intel
aes_x86_64
glue_helper
lrw
gf128mul
ablk_helper
cryptd
firewire_ohci
firewire_core
crc_itu_t
i2c_piix4
pata_atiixp
ahci
libahci
xhci_pci
ohci_hcd
ehci_pci
xhci_hcd
ehci_hcd
libata
r8169
scsi_mod
usbcore
mii
usb_common
** Network interface configuration:
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether fc:aa:14:2d:cd:1e brd ff:ff:ff:ff:ff:ff
inet 192.168.1.52/24 brd 192.168.1.255 scope global dynamic enp3s0
valid_lft 82141sec preferred_lft 82141sec
inet6 fe80::feaa:14ff:fe2d:cd1e/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
enp3s0: 152517296 131079 0 0 0 0 0 5095 10163091 97288 0 0 0 0 0 0
lo: 13874 178 0 0 0 0 0 0 13874 178 0 0 0 0 0 0
*** Protocol statistics:
Ip:
Forwarding: 2
129966 total packets received
4 with invalid addresses
0 forwarded
0 incoming packets discarded
129962 incoming packets delivered
97248 requests sent out
40 outgoing packets dropped
Icmp:
80 ICMP messages received
0 input ICMP message failed
ICMP input histogram:
destination unreachable: 80
80 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 80
IcmpMsg:
InType3: 80
OutType3: 80
Tcp:
2037 active connection openings
1 passive connection openings
10 failed connection attempts
89 connection resets received
5 connections established
119881 segments received
92003 segments sent out
176 segments retransmitted
65 bad segments received
1591 resets sent
Udp:
14638 packets received
80 packets to unknown port received
0 packet receive errors
4938 packets sent
0 receive buffer errors
0 send buffer errors
IgnoredMulti: 6
UdpLite:
TcpExt:
666 TCP sockets finished time wait in fast timer
1759 delayed acks sent
1 delayed acks further delayed because of locked socket
Quick ack mode was activated 120 times
13 packets directly queued to recvmsg prequeue
TCPDirectCopyFromPrequeue: 1379
91918 packet headers predicted
9330 acknowledgments not containing data payload received
2506 predicted acknowledgments
TCPSackRecovery: 10
32 congestion windows recovered without slow start after partial ack
TCPSackFailures: 1
10 fast retransmits
1 retransmits in slow start
TCPTimeouts: 37
TCPLossProbes: 104
TCPLossProbeRecovery: 16
TCPSackRecoveryFail: 1
TCPDSACKOldSent: 113
TCPDSACKRecv: 49
418 connections reset due to unexpected data
12 connections reset due to early user close
4 connections aborted due to timeout
TCPDSACKIgnoredNoUndo: 30
TCPSackShiftFallback: 11
TCPRcvCoalesce: 12170
TCPOFOQueue: 7119
TCPChallengeACK: 65
TCPSYNChallenge: 65
TCPAutoCorking: 567
TCPSynRetrans: 46
TCPOrigDataSent: 10795
TCPKeepAlive: 5253
IpExt:
InMcastPkts: 5327
OutMcastPkts: 296
InBcastPkts: 6
OutBcastPkts: 6
InOctets: 150654585
OutOctets: 8638045
InMcastOctets: 2066396
OutMcastOctets: 52094
InBcastOctets: 284
OutBcastOctets: 284
InNoECTPkts: 130843
InECT0Pkts: 3
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge [1002:5a14] (rev 02)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge [1002:5a14]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GFX port 0) [1002:5a16] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
NUMA node: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 0) [1002:5a18] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
NUMA node: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fe900000-fe9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:09.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 4) [1002:5a1c] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
NUMA node: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe800000-fe8fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [1002:4390] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd GA-MA770-DS3rev2.0 Motherboard [1458:b002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 19
NUMA node: 0
Region 0: I/O ports at f090 [size=8]
Region 1: I/O ports at f080 [size=4]
Region 2: I/O ports at f070 [size=8]
Region 3: I/O ports at f060 [size=4]
Region 4: I/O ports at f050 [size=16]
Region 5: Memory at feb0b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
NUMA node: 0
Region 0: Memory at feb0a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB EHCI Controller [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
NUMA node: 0
Region 0: Memory at feb09000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
NUMA node: 0
Region 0: Memory at feb08000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB EHCI Controller [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
NUMA node: 0
Region 0: Memory at feb07000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 42)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4, sp5100_tco
00:14.1 IDE interface [0101]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] (rev 40) (prog-if 8a [Master SecP PriP])
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 IDE Controller [1458:5002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin B routed to IRQ 17
NUMA node: 0
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at f000 [size=16]
Kernel driver in use: pata_atiixp
Kernel modules: pata_atiixp, ata_generic
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
Subsystem: Gigabyte Technology Co., Ltd SBx00 Azalia (Intel HDA) [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
NUMA node: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
NUMA node: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
Memory behind bridge: fe700000-fe7fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
NUMA node: 0
Region 0: Memory at feb06000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
NUMA node: 0
Region 0: Memory at feb05000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB EHCI Controller [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
NUMA node: 0
Region 0: Memory at feb04000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0 [1022:1600]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1 [1022:1601]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2 [1022:1602]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3 [1022:1603]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
Kernel driver in use: k10temp
Kernel modules: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4 [1022:1604]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Kernel driver in use: fam15h_power
Kernel modules: fam15h_power
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5 [1022:1605]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Cedar [Radeon HD 5000/6000/7350/8350 Series] [1002:68f9] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Cedar [Radeon HD 5000/6000/7350/8350 Series] [1043:04b3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 33
NUMA node: 0
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fea20000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at e000 [size=256]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeon
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Cedar HDMI Audio [Radeon HD 5400/6300/7300 Series] [1002:aa68]
Subsystem: ASUSTeK Computer Inc. Cedar HDMI Audio [Radeon HD 5400/6300/7300 Series] [1043:aa68]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 31
NUMA node: 0
Region 0: Memory at fea40000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
02:00.0 USB controller [0c03]: VIA Technologies, Inc. VL805 USB 3.0 Host Controller [1106:3483] (rev 01) (prog-if 30 [XHCI])
Subsystem: Gigabyte Technology Co., Ltd VL805 USB 3.0 Host Controller [1458:5007]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
NUMA node: 0
Region 0: Memory at fe900000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Onboard Ethernet [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
NUMA node: 0
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at fe800000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at d0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
04:07.0 FireWire (IEEE 1394) [0c00]: LSI Corporation FW322/323 [TrueFire] 1394a Controller [11c1:5811] (rev 04) (prog-if 10 [OHCI])
Subsystem: LSI Corporation FW322/323 [TrueFire] 1394a Controller [11c1:5811]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
NUMA node: 0
Region 0: Memory at fe700000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci
** USB devices:
Bus 005 Device 002: ID 04b8:0116 Seiko Epson Corp. GT-9400UF [Perfection 3170]
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 003: ID 046d:c044 Logitech, Inc. LX3 Optical Mouse
Bus 002 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 9.1
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.9.0-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8), LANGUAGE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.9.0-3-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.130
ii kmod 23-2
ii linux-base 4.5
Versions of packages linux-image-4.9.0-3-amd64 recommends:
ii firmware-linux-free 3.4
pn irqbalance <none>
Versions of packages linux-image-4.9.0-3-amd64 suggests:
ii debian-kernel-handbook 1.0.18
ii grub-efi-amd64 2.02~beta3-5
ii linux-doc-4.9 4.9.30-2+deb9u5
Versions of packages linux-image-4.9.0-3-amd64 is related to:
ii firmware-amd-graphics 20161130-3
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20161130-3
ii firmware-misc-nonfree 20161130-3
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20161130-3
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge (rev 02)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GFX port 0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
NUMA node: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
NUMA node: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fe900000-fe9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
NUMA node: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe800000-fe8fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd GA-MA770-DS3rev2.0 Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 19
NUMA node: 0
Region 0: I/O ports at f090 [size=8]
Region 1: I/O ports at f080 [size=4]
Region 2: I/O ports at f070 [size=8]
Region 3: I/O ports at f060 [size=4]
Region 4: I/O ports at f050 [size=16]
Region 5: Memory at feb0b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
NUMA node: 0
Region 0: Memory at feb0a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB EHCI Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
NUMA node: 0
Region 0: Memory at feb09000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
NUMA node: 0
Region 0: Memory at feb08000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB EHCI Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
NUMA node: 0
Region 0: Memory at feb07000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4, sp5100_tco
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) (prog-if 8a [Master SecP PriP])
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 IDE Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin B routed to IRQ 17
NUMA node: 0
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at f000 [size=16]
Kernel driver in use: pata_atiixp
Kernel modules: pata_atiixp, ata_generic
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
Subsystem: Gigabyte Technology Co., Ltd SBx00 Azalia (Intel HDA)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
NUMA node: 0
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
NUMA node: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
Memory behind bridge: fe700000-fe7fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
NUMA node: 0
Region 0: Memory at feb06000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
NUMA node: 0
Region 0: Memory at feb05000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB EHCI Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
NUMA node: 0
Region 0: Memory at feb04000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
Kernel driver in use: k10temp
Kernel modules: k10temp
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Kernel driver in use: fam15h_power
Kernel modules: fam15h_power
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cedar [Radeon HD 5000/6000/7350/8350 Series] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Cedar [Radeon HD 5000/6000/7350/8350 Series]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 33
NUMA node: 0
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fea20000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at e000 [size=256]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeon
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Cedar HDMI Audio [Radeon HD 5400/6300/7300 Series]
Subsystem: ASUSTeK Computer Inc. Cedar HDMI Audio [Radeon HD 5400/6300/7300 Series]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 31
NUMA node: 0
Region 0: Memory at fea40000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
02:00.0 USB controller: VIA Technologies, Inc. VL805 USB 3.0 Host Controller (rev 01) (prog-if 30 [XHCI])
Subsystem: Gigabyte Technology Co., Ltd VL805 USB 3.0 Host Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
NUMA node: 0
Region 0: Memory at fe900000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Onboard Ethernet
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
NUMA node: 0
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at fe800000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at d0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
04:07.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev 04) (prog-if 10 [OHCI])
Subsystem: LSI Corporation FW322/323 [TrueFire] 1394a Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
NUMA node: 0
Region 0: Memory at fe700000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci
[ 0.000000] Linux version 4.9.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u5 (2017-09-19)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=afaa4f9e-82f3-4613-adbf-31a1bd744f4a ro iommu=soft quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be877fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be878000-0x00000000bea4afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bea4b000-0x00000000bee3dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bee3e000-0x00000000bf109fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf10a000-0x00000000bf15ffff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000bf160000-0x00000000bf160fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf161000-0x00000000bf366fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf367000-0x00000000bf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xbee23000 ACPI 2.0=0xbee23000 SMBIOS=0xf04c0 MPS=0xfd4b0
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./970A-DS3P, BIOS F1 04/08/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000BF800000 mask FFFFFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000023f000000 aka 9200M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd7b0-0x000fd7bf] mapped at [ffff9e4b400fd7b0]
[ 0.000000] Base memory trampoline at [ffff9e4b40099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x20412e000, 0x20412efff] PGTABLE
[ 0.000000] BRK [0x20412f000, 0x20412ffff] PGTABLE
[ 0.000000] BRK [0x204130000, 0x204130fff] PGTABLE
[ 0.000000] BRK [0x204131000, 0x204131fff] PGTABLE
[ 0.000000] BRK [0x204132000, 0x204132fff] PGTABLE
[ 0.000000] BRK [0x204133000, 0x204133fff] PGTABLE
[ 0.000000] BRK [0x204134000, 0x204134fff] PGTABLE
[ 0.000000] BRK [0x204135000, 0x204135fff] PGTABLE
[ 0.000000] BRK [0x204136000, 0x204136fff] PGTABLE
[ 0.000000] BRK [0x204137000, 0x204137fff] PGTABLE
[ 0.000000] BRK [0x204138000, 0x204138fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3592d000-0x36c8dfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000BEE23000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000BEE23070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BEE283F8 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160831/tbfadt-658)
[ 0.000000] ACPI: DSDT 0x00000000BEE23160 005292 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000BEE38F80 000040
[ 0.000000] ACPI: APIC 0x00000000BEE284F0 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000BEE28570 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000BEE285B8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x00000000BEE285F8 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: BGRT 0x00000000BEE28630 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000BEE28668 000B9C (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x23effb000-0x23effffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000023effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000be877fff]
[ 0.000000] node 0: [mem 0x00000000bf160000-0x00000000bf160fff]
[ 0.000000] node 0: [mem 0x00000000bf367000-0x00000000bf7fffff]
[ 0.000000] node 0: [mem 0x0000000100001000-0x000000023effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023effffff]
[ 0.000000] On node 0 totalpages: 2088112
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 24 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12149 pages used for memmap
[ 0.000000] DMA32 zone: 777490 pages, LIFO batch:31
[ 0.000000] Normal zone: 20416 pages used for memmap
[ 0.000000] Normal zone: 1306623 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe878000-0xbea4afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbea4b000-0xbee3dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbee3e000-0xbf109fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf10a000-0xbf15ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf161000-0xbf366fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[ 0.000000] e820: [mem 0xbf800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff9e4d7ec00000 s103512 r8192 d31656 u524288
[ 0.000000] pcpu-alloc: s103512 r8192 d31656 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2055459
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=afaa4f9e-82f3-4613-adbf-31a1bd744f4a ro iommu=soft quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 7937164K/8352448K available (6188K kernel code, 1137K rwdata, 2856K rodata, 1392K init, 688K bss, 415284K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:1000 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3817.605 MHz processor
[ 0.000016] Calibrating delay loop (skipped), value calculated using timer frequency.. 7635.21 BogoMIPS (lpj=15270420)
[ 0.000018] pid_max: default: 32768 minimum: 301
[ 0.000030] ACPI: Core revision 20160831
[ 0.002387] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.002655] Security Framework initialized
[ 0.002656] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.002660] AppArmor: AppArmor disabled by boot time parameter
[ 0.003075] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.004810] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.005613] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.005622] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.005867] CPU: Physical Processor ID: 0
[ 0.005867] CPU: Processor Core ID: 0
[ 0.005868] mce: CPU supports 7 MCE banks
[ 0.005874] LVT offset 1 assigned for vector 0xf9
[ 0.005879] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.005879] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.006092] Freeing SMP alternatives memory: 24K (ffffffff87e7a000 - ffffffff87e80000)
[ 0.014056] ftrace: allocating 25180 entries in 99 pages
[ 0.021195] smpboot: Max logical packages: 1
[ 0.021535] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.167670] smpboot: CPU0: AMD FX(tm)-4300 Quad-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
[ 0.167673] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.167676] ... version: 0
[ 0.167676] ... bit width: 48
[ 0.167677] ... generic registers: 6
[ 0.167677] ... value mask: 0000ffffffffffff
[ 0.167678] ... max period: 00007fffffffffff
[ 0.167678] ... fixed-purpose events: 0
[ 0.167679] ... event mask: 000000000000003f
[ 0.168120] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.168223] x86: Booting SMP configuration:
[ 0.168224] .... node #0, CPUs: #1 #2 #3
[ 0.417703] x86: Booted up 1 node, 4 CPUs
[ 0.417705] smpboot: Total of 4 processors activated (30539.46 BogoMIPS)
[ 0.420858] devtmpfs: initialized
[ 0.420917] x86/mm: Memory block size: 128MB
[ 0.423898] PM: Registering ACPI NVS region [mem 0xbea4b000-0xbee3dfff] (4141056 bytes)
[ 0.423984] PM: Registering ACPI NVS region [mem 0xbf161000-0xbf366fff] (2121728 bytes)
[ 0.424075] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.424084] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.424127] pinctrl core: initialized pinctrl subsystem
[ 0.424224] NET: Registered protocol family 16
[ 0.439661] cpuidle: using governor ladder
[ 0.451660] cpuidle: using governor menu
[ 0.451701] ACPI: bus type PCI registered
[ 0.451702] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.451763] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.451765] PCI: not using MMCONFIG
[ 0.451765] PCI: Using configuration type 1 for base access
[ 0.451766] PCI: Using configuration type 1 for extended access
[ 0.467794] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.467795] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.468054] ACPI: Added _OSI(Module Device)
[ 0.468055] ACPI: Added _OSI(Processor Device)
[ 0.468056] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.468056] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.468336] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.470755] ACPI: Interpreter enabled
[ 0.470770] ACPI: (supports S0 S3 S4 S5)
[ 0.470771] ACPI: Using IOAPIC for interrupt routing
[ 0.470888] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.470921] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.470932] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.475254] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.475258] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.475261] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.475526] PCI host bridge to bus 0000:00
[ 0.475527] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.475528] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.475529] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.475530] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.475532] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.475533] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.475533] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[ 0.475535] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.475542] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[ 0.475655] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[ 0.475686] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.475728] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.475763] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[ 0.475792] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.475833] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.475869] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[ 0.475898] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.475939] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.475980] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[ 0.475993] pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097]
[ 0.475999] pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083]
[ 0.476006] pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077]
[ 0.476012] pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063]
[ 0.476019] pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f]
[ 0.476025] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff]
[ 0.476041] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.476125] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.476135] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff]
[ 0.476215] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.476250] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.476262] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff]
[ 0.476320] pci 0000:00:12.2: supports D1 D2
[ 0.476321] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.476361] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.476412] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.476421] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff]
[ 0.476500] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.476535] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.476547] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff]
[ 0.476605] pci 0000:00:13.2: supports D1 D2
[ 0.476606] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.476647] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.476683] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.476793] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.476802] pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047]
[ 0.476809] pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033]
[ 0.476815] pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027]
[ 0.476822] pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013]
[ 0.476828] pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f]
[ 0.476843] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.476843] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.476844] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.476845] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.476915] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.476929] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
[ 0.476978] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.477017] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.477049] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.477161] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.477224] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.477258] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.477267] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff]
[ 0.477346] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.477380] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.477390] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff]
[ 0.477469] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.477504] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.477516] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff]
[ 0.477574] pci 0000:00:16.2: supports D1 D2
[ 0.477575] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.477615] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.477651] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[ 0.477726] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[ 0.477791] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[ 0.477858] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[ 0.477926] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[ 0.477992] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[ 0.478097] pci 0000:01:00.0: [1002:68f9] type 00 class 0x030000
[ 0.478109] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.478117] pci 0000:01:00.0: reg 0x18: [mem 0xfea20000-0xfea3ffff 64bit]
[ 0.478122] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.478132] pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea1ffff pref]
[ 0.478162] pci 0000:01:00.0: supports D1 D2
[ 0.478206] pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300
[ 0.478217] pci 0000:01:00.1: reg 0x10: [mem 0xfea40000-0xfea43fff 64bit]
[ 0.478262] pci 0000:01:00.1: supports D1 D2
[ 0.487670] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.487673] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.487675] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.487677] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.487718] pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330
[ 0.487730] pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe900fff 64bit]
[ 0.487784] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.499668] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.499671] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.499723] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.499735] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.499754] pci 0000:03:00.0: reg 0x18: [mem 0xfe800000-0xfe800fff 64bit]
[ 0.499765] pci 0000:03:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.499829] pci 0000:03:00.0: supports D1 D2
[ 0.499830] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.499864] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.511668] pci 0000:00:09.0: PCI bridge to [bus 03]
[ 0.511670] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.511672] pci 0000:00:09.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.511674] pci 0000:00:09.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.511717] pci 0000:04:07.0: [11c1:5811] type 00 class 0x0c0010
[ 0.511730] pci 0000:04:07.0: reg 0x10: [mem 0xfe700000-0xfe700fff]
[ 0.511795] pci 0000:04:07.0: supports D1 D2
[ 0.511796] pci 0000:04:07.0: PME# supported from D0 D1 D2 D3hot
[ 0.511860] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.511864] pci 0000:00:14.4: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.511867] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 0.511868] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 0.511869] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
[ 0.511870] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.511871] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.511872] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.511873] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[ 0.512122] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.512175] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.512228] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.512281] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[ 0.512323] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) *0
[ 0.512357] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
[ 0.512391] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0
[ 0.512424] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 10 11 14 15) *0
[ 0.512609] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.512610] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.512611] vgaarb: loaded
[ 0.512612] vgaarb: bridge control possible 0000:01:00.0
[ 0.512645] Registered efivars operations
[ 0.517897] PCI: Using ACPI for IRQ routing
[ 0.524214] PCI: pci_cache_line_size set to 64 bytes
[ 0.524260] e820: reserve RAM buffer [mem 0xbe878000-0xbfffffff]
[ 0.524261] e820: reserve RAM buffer [mem 0xbf161000-0xbfffffff]
[ 0.524262] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.524263] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
[ 0.524413] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.524416] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.526459] clocksource: Switched to clocksource hpet
[ 0.532612] VFS: Disk quotas dquot_6.6.0
[ 0.532633] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.532704] pnp: PnP ACPI init
[ 0.532804] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.532807] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.533034] system 00:01: [io 0x040b] has been reserved
[ 0.533035] system 00:01: [io 0x04d6] has been reserved
[ 0.533036] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.533037] system 00:01: [io 0x0c14] has been reserved
[ 0.533038] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.533039] system 00:01: [io 0x0c52] has been reserved
[ 0.533040] system 00:01: [io 0x0c6c] has been reserved
[ 0.533041] system 00:01: [io 0x0c6f] has been reserved
[ 0.533042] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.533043] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.533044] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.533045] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.533046] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.533047] system 00:01: [io 0x0800-0x089f] has been reserved
[ 0.533048] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.533049] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.533050] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.533052] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.533053] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.533055] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.533056] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.533057] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.533059] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.533060] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.533061] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.533063] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.533195] system 00:02: [io 0x0220-0x0227] has been reserved
[ 0.533196] system 00:02: [io 0x0228-0x0237] has been reserved
[ 0.533197] system 00:02: [io 0x0a20-0x0a2f] has been reserved
[ 0.533199] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.533241] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.533276] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.533327] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.533328] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.533364] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.533462] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.533566] system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
[ 0.533567] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.533642] pnp: PnP ACPI: found 9 devices
[ 0.540174] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.540191] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.540193] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.540195] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.540197] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.540199] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.540201] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.540204] pci 0000:00:09.0: PCI bridge to [bus 03]
[ 0.540206] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.540207] pci 0000:00:09.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.540209] pci 0000:00:09.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.540212] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.540215] pci 0000:00:14.4: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.540222] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.540223] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.540224] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.540225] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.540226] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.540227] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.540228] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[ 0.540229] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.540230] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.540231] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.540232] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.540233] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.540234] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.540235] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.540237] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff]
[ 0.540238] pci_bus 0000:04: resource 4 [io 0x0000-0x03af window]
[ 0.540238] pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.540239] pci_bus 0000:04: resource 6 [io 0x03b0-0x03df window]
[ 0.540240] pci_bus 0000:04: resource 7 [io 0x0d00-0xffff window]
[ 0.540241] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.540242] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.540243] pci_bus 0000:04: resource 10 [mem 0xc0000000-0xffffffff window]
[ 0.540316] NET: Registered protocol family 2
[ 0.540460] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.540595] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.540774] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.540804] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.540835] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.540900] NET: Registered protocol family 1
[ 0.894645] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.894746] PCI: CLS 64 bytes, default 64
[ 0.894784] Unpacking initramfs...
[ 1.167737] Freeing initrd memory: 19844K (ffff9e4b7592d000 - ffff9e4b76c8e000)
[ 1.167739] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.167741] software IO TLB [mem 0xaf66c000-0xb366c000] (64MB) mapped at [ffff9e4bef66c000-ffff9e4bf366bfff]
[ 1.167798] perf: AMD NB counters detected
[ 1.167889] LVT offset 0 assigned for vector 0x400
[ 1.167925] perf: AMD IBS detected (0x000000ff)
[ 1.168216] audit: initializing netlink subsys (disabled)
[ 1.168231] audit: type=2000 audit(1506376327.060:1): initialized
[ 1.168600] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 1.168645] zbud: loaded
[ 1.169326] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 1.169358] io scheduler noop registered
[ 1.169358] io scheduler deadline registered
[ 1.169368] io scheduler cfq registered (default)
[ 1.169616] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.169620] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.169634] efifb: probing for efifb
[ 1.169645] efifb: framebuffer at 0xc0000000, using 3072k, total 3072k
[ 1.169646] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 1.169646] efifb: scrolling: redraw
[ 1.169647] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.171192] Console: switching to colour frame buffer device 128x48
[ 1.172662] fb0: EFI VGA frame buffer device
[ 1.172957] GHES: HEST is not enabled!
[ 1.173013] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.173363] Linux agpgart interface v0.103
[ 1.173563] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.173564] AMD IOMMUv2 functionality not available on this system
[ 1.173884] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.173885] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.174055] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.174156] mousedev: PS/2 mouse device common for all mice
[ 1.174200] rtc_cmos 00:04: RTC can wake from S4
[ 1.174296] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.174315] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.174360] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.174754] NET: Registered protocol family 10
[ 1.174923] mip6: Mobile IPv6
[ 1.174924] NET: Registered protocol family 17
[ 1.174925] mpls_gso: MPLS GSO support
[ 1.175164] microcode: microcode updated early to new patch_level=0x0600084f
[ 1.175182] microcode: CPU0: patch_level=0x0600084f
[ 1.175187] microcode: CPU1: patch_level=0x0600084f
[ 1.175194] microcode: CPU2: patch_level=0x0600084f
[ 1.175201] microcode: CPU3: patch_level=0x0600084f
[ 1.175232] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.175351] registered taskstats version 1
[ 1.175362] zswap: loaded using pool lzo/zbud
[ 1.175448] ima: No TPM chip found, activating TPM-bypass!
[ 1.175687] rtc_cmos 00:04: setting system clock to 2017-09-25 21:52:08 UTC (1506376328)
[ 1.175735] PM: Hibernation image not present or could not be loaded.
[ 1.176831] Freeing unused kernel memory: 1392K (ffffffff87d1e000 - ffffffff87e7a000)
[ 1.176832] Write protecting the kernel read-only data: 12288k
[ 1.177390] Freeing unused kernel memory: 1988K (ffff9e4d4380f000 - ffff9e4d43a00000)
[ 1.179739] Freeing unused kernel memory: 1240K (ffff9e4d43cca000 - ffff9e4d43e00000)
[ 1.184456] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.195506] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.195566] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.195573] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.195582] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.196157] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.196186] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.196789] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.196801] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.197118] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.197161] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.200423] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.219447] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.219459] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.220000] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffbf8940c69000, fc:aa:14:2d:cd:1e, XID 0c900800 IRQ 27
[ 1.220003] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.220200] ACPI: bus type USB registered
[ 1.220227] usbcore: registered new interface driver usbfs
[ 1.220238] usbcore: registered new interface driver hub
[ 1.220614] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 1.220620] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
[ 1.220801] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 1.221592] SCSI subsystem initialized
[ 1.223058] firewire_ohci 0000:04:07.0: enabling device (0000 -> 0002)
[ 1.223216] usbcore: registered new device driver usb
[ 1.223761] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.224033] ehci-pci: EHCI PCI platform driver
[ 1.224147] QUIRK: Enable AMD PLL fix
[ 1.224158] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.224163] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.224174] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.224180] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.224188] ehci-pci 0000:00:12.2: debug port 1
[ 1.224218] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000
[ 1.227828] AVX version of gcm_enc/dec engaged.
[ 1.227828] AES CTR mode by8 optimization enabled
[ 1.230482] libata version 3.00 loaded.
[ 1.238456] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.238529] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.238531] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.238533] usb usb1: Product: EHCI Host Controller
[ 1.238534] usb usb1: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[ 1.238535] usb usb1: SerialNumber: 0000:00:12.2
[ 1.238689] hub 1-0:1.0: USB hub found
[ 1.238697] hub 1-0:1.0: 5 ports detected
[ 1.238959] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.238964] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 1.239049] xhci_hcd 0000:02:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00000090
[ 1.239151] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.239154] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.239155] usb usb2: Product: xHCI Host Controller
[ 1.239156] usb usb2: Manufacturer: Linux 4.9.0-3-amd64 xhci-hcd
[ 1.239156] usb usb2: SerialNumber: 0000:02:00.0
[ 1.239320] hub 2-0:1.0: USB hub found
[ 1.239335] hub 2-0:1.0: 1 port detected
[ 1.239409] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 1.239429] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.239432] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[ 1.239446] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.239463] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.239488] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.239489] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.239490] usb usb3: Product: xHCI Host Controller
[ 1.239492] usb usb3: Manufacturer: Linux 4.9.0-3-amd64 xhci-hcd
[ 1.239493] usb usb3: SerialNumber: 0000:02:00.0
[ 1.239670] hub 3-0:1.0: USB hub found
[ 1.239676] hub 3-0:1.0: 4 ports detected
[ 1.239808] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.239811] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.239819] ehci-pci 0000:00:13.2: debug port 1
[ 1.239841] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000
[ 1.254582] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.254783] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.254785] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.254786] usb usb4: Product: EHCI Host Controller
[ 1.254786] usb usb4: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[ 1.254787] usb usb4: SerialNumber: 0000:00:13.2
[ 1.254918] hub 4-0:1.0: USB hub found
[ 1.254931] hub 4-0:1.0: 5 ports detected
[ 1.255207] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 1.255211] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5
[ 1.255214] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.255221] ehci-pci 0000:00:16.2: debug port 1
[ 1.255244] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000
[ 1.270537] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.270738] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.270742] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.270744] usb usb5: Product: EHCI Host Controller
[ 1.270746] usb usb5: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[ 1.270756] usb usb5: SerialNumber: 0000:00:16.2
[ 1.270886] hub 5-0:1.0: USB hub found
[ 1.270921] hub 5-0:1.0: 4 ports detected
[ 1.271363] ohci-pci: OHCI PCI platform driver
[ 1.271916] scsi host0: pata_atiixp
[ 1.272256] scsi host1: pata_atiixp
[ 1.272319] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.272320] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.272340] ahci 0000:00:11.0: version 3.0
[ 1.272499] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.272501] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 1.273037] scsi host2: ahci
[ 1.273150] scsi host3: ahci
[ 1.273236] scsi host4: ahci
[ 1.273319] scsi host5: ahci
[ 1.273364] ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
[ 1.273365] ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
[ 1.273367] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19
[ 1.273368] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19
[ 1.273448] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.273453] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6
[ 1.273476] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000
[ 1.282553] firewire_ohci 0000:04:07.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 1.334554] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.334555] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.334556] usb usb6: Product: OHCI PCI host controller
[ 1.334557] usb usb6: Manufacturer: Linux 4.9.0-3-amd64 ohci_hcd
[ 1.334558] usb usb6: SerialNumber: 0000:00:12.0
[ 1.334761] hub 6-0:1.0: USB hub found
[ 1.334767] hub 6-0:1.0: 5 ports detected
[ 1.334942] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.334946] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
[ 1.334962] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000
[ 1.398551] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.398552] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.398553] usb usb7: Product: OHCI PCI host controller
[ 1.398554] usb usb7: Manufacturer: Linux 4.9.0-3-amd64 ohci_hcd
[ 1.398555] usb usb7: SerialNumber: 0000:00:13.0
[ 1.398754] hub 7-0:1.0: USB hub found
[ 1.398760] hub 7-0:1.0: 5 ports detected
[ 1.398934] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.398938] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8
[ 1.398952] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000
[ 1.462544] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.462546] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.462547] usb usb8: Product: OHCI PCI host controller
[ 1.462548] usb usb8: Manufacturer: Linux 4.9.0-3-amd64 ohci_hcd
[ 1.462549] usb usb8: SerialNumber: 0000:00:14.5
[ 1.462669] hub 8-0:1.0: USB hub found
[ 1.462677] hub 8-0:1.0: 2 ports detected
[ 1.462816] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 1.462820] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9
[ 1.462835] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000
[ 1.526546] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.526548] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.526548] usb usb9: Product: OHCI PCI host controller
[ 1.526549] usb usb9: Manufacturer: Linux 4.9.0-3-amd64 ohci_hcd
[ 1.526550] usb usb9: SerialNumber: 0000:00:16.0
[ 1.526746] hub 9-0:1.0: USB hub found
[ 1.526752] hub 9-0:1.0: 4 ports detected
[ 1.566527] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[ 1.566542] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 1.590256] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.707766] usb 2-1: New USB device found, idVendor=2109, idProduct=3431
[ 1.707768] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.707769] usb 2-1: Product: USB2.0 Hub
[ 1.708210] hub 2-1:1.0: USB hub found
[ 1.708308] hub 2-1:1.0: 4 ports detected
[ 1.719779] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[ 1.719780] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.719781] usb 1-2: Product: USB2.0 Hub
[ 1.720180] hub 1-2:1.0: USB hub found
[ 1.720527] hub 1-2:1.0: 4 ports detected
[ 1.750538] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.750564] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.750587] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.751263] ata3.00: ATA-9: ST2000DM001-1ER164, CC25, max UDMA/133
[ 1.751265] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.751452] ata4.00: ATA-8: SanDisk SDSSDHP128G, X2316RL, max UDMA/133
[ 1.751453] ata4.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.751727] ata5.00: ATAPI: HL-DT-ST DVDRAM GH24NSB0, LM01, max UDMA/133
[ 1.752019] ata3.00: configured for UDMA/133
[ 1.752201] scsi 2:0:0:0: Direct-Access ATA ST2000DM001-1ER1 CC25 PQ: 0 ANSI: 5
[ 1.752348] ata4.00: configured for UDMA/133
[ 1.753380] ata5.00: configured for UDMA/133
[ 1.754439] usb 7-1: new low-speed USB device number 2 using ohci-pci
[ 1.782822] scsi 3:0:0:0: Direct-Access ATA SanDisk SDSSDHP1 6RL PQ: 0 ANSI: 5
[ 1.802670] firewire_core 0000:04:07.0: created device fw0: GUID 00601d0000001b79, S400
[ 1.827744] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSB0 LM01 PQ: 0 ANSI: 5
[ 1.840892] sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.840895] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 1.840937] sd 3:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.840941] sd 2:0:0:0: [sda] Write Protect is off
[ 1.840943] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.840963] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.841004] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.841006] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.841064] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.842893] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[ 1.843410] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.854048] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.854049] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.854180] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.890748] sda: sda1 sda2 sda3
[ 1.891184] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.905305] random: fast init done
[ 1.943589] usb 7-1: New USB device found, idVendor=046d, idProduct=c044
[ 1.943591] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.943592] usb 7-1: Product: USB-PS/2 Optical Mouse
[ 1.943593] usb 7-1: Manufacturer: Logitech
[ 1.946496] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.952692] usbcore: registered new interface driver usbhid
[ 1.952693] usbhid: USB HID core driver
[ 1.953224] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.0/0003:046D:C044.0001/input/input1
[ 1.953298] hid-generic 0003:046D:C044.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-1/input0
[ 2.186499] tsc: Refined TSC clocksource calibration: 3817.485 MHz
[ 2.186504] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6e0dbe104d3, max_idle_ns: 881591110880 ns
[ 2.204666] PM: Starting manual resume from disk
[ 2.204668] PM: Hibernation image partition 8:1 present
[ 2.204669] PM: Looking for hibernation image.
[ 2.204762] PM: Image not found (code -22)
[ 2.204763] PM: Hibernation image not present or could not be loaded.
[ 2.493698] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.601866] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.626509] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 2.626629] systemd[1]: Detected architecture x86-64.
[ 2.626793] systemd[1]: Set hostname to <NachaMachina2>.
[ 2.703523] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.703649] systemd[1]: Created slice System Slice.
[ 2.703740] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 2.703773] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 2.703804] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.703882] systemd[1]: Created slice User and Session Slice.
[ 2.703907] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 2.719038] lp: driver loaded but no devices found
[ 2.720469] ppdev: user-space parallel port driver
[ 2.728452] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[ 2.785995] systemd-journald[238]: Received request to flush runtime journal from PID 1
[ 2.841134] acpi_cpufreq: overriding BIOS provided _PSD data
[ 2.841353] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 2.841356] ACPI: Power Button [PWRB]
[ 2.841407] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.841408] ACPI: Power Button [PWRF]
[ 2.878615] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 2.878670] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x42
[ 2.878673] sp5100_tco: I/O address 0x0cd6 already in use
[ 2.878992] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.879783] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.879827] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 2.879878] sr 4:0:0:0: Attached scsi generic sg2 type 5
[ 2.891930] [drm] Initialized
[ 2.896434] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 2.896495] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 2.908881] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input4
[ 2.915464] EFI Variables Facility v0.08 2004-May-17
[ 2.917191] [drm] radeon kernel modesetting enabled.
[ 2.917793] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 2.923057] CRAT table not found
[ 2.923058] Finished initializing topology ret=0
[ 2.923069] kfd kfd: Initialized module
[ 2.923397] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[ 2.923398] fb: switching to radeondrmfb from EFI VGA
[ 2.923431] Console: switching to colour dummy device 80x25
[ 2.923697] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1043:0x04B3 0x00).
[ 2.923711] [drm] register mmio base: 0xFEA20000
[ 2.923712] [drm] register mmio size: 131072
[ 2.923764] ATOM BIOS: 68F9.12.20.0.64.AS07
[ 2.923815] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 2.923816] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 2.923820] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 2.923820] [drm] RAM width 64bits DDR
[ 2.924012] [TTM] Zone kernel: Available graphics memory: 4071732 kiB
[ 2.924013] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.924013] [TTM] Initializing pool allocator
[ 2.924018] [TTM] Initializing DMA pool allocator
[ 2.924052] [drm] radeon: 1024M of VRAM memory ready
[ 2.924054] [drm] radeon: 1024M of GTT memory ready.
[ 2.924074] [drm] Loading CEDAR Microcode
[ 2.927268] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 2.927271] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.927273] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 2.927274] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 2.927276] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
[ 2.927276] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 2.927278] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 2.927279] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 2.927281] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 2.927282] snd_hda_codec_realtek hdaudioC0D0: CD=0x1c
[ 2.929457] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CEDAR_pfp.bin
[ 2.929689] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CEDAR_me.bin
[ 2.930035] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CEDAR_rlc.bin
[ 2.930324] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CEDAR_smc.bin
[ 2.930329] [drm] Internal thermal controller without fan control
[ 2.930475] pstore: using zlib compression
[ 2.930488] pstore: Registered efi as persistent store backend
[ 2.959230] [drm] radeon: dpm initialized
[ 2.959609] kvm: Nested Virtualization enabled
[ 2.959611] kvm: Nested Paging enabled
[ 2.960554] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CYPRESS_uvd.bin
[ 2.960582] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 2.961497] EDAC MC: Ver: 3.0.0
[ 2.963358] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 2.964892] MCE: In-kernel MCE decoding enabled.
[ 2.965499] EDAC amd64: DRAM ECC disabled.
[ 2.965503] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 2.978162] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
[ 2.979205] radeon 0000:01:00.0: WB enabled
[ 2.979208] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff9e4d73a86c00
[ 2.979210] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff9e4d73a86c0c
[ 2.979573] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffbf8941e1c418
[ 2.979700] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.979701] [drm] Driver supports precise vblank timestamp query.
[ 2.979703] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 2.980058] radeon 0000:01:00.0: radeon: using MSI.
[ 2.980077] [drm] radeon: irq initialized.
[ 2.997529] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 2.998534] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 2.998603] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 2.998664] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 2.998747] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 2.998856] [drm] ring test on 0 succeeded in 1 usecs
[ 2.998861] [drm] ring test on 3 succeeded in 2 usecs
[ 3.184528] [drm] ring test on 5 succeeded in 1 usecs
[ 3.184533] [drm] UVD initialized successfully.
[ 3.185958] [drm] ib test on ring 0 succeeded in 0 usecs
[ 3.187144] [drm] ib test on ring 3 succeeded in 0 usecs
[ 3.356961] [drm] ib test on ring 5 succeeded
[ 3.358069] [drm] Radeon Display Connectors
[ 3.358070] [drm] Connector 0:
[ 3.358071] [drm] HDMI-A-1
[ 3.358071] [drm] HPD2
[ 3.358073] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 3.358073] [drm] Encoders:
[ 3.358074] [drm] DFP1: INTERNAL_UNIPHY1
[ 3.358074] [drm] Connector 1:
[ 3.358075] [drm] DVI-I-1
[ 3.358075] [drm] HPD4
[ 3.358077] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 3.358077] [drm] Encoders:
[ 3.358078] [drm] DFP2: INTERNAL_UNIPHY
[ 3.358078] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 3.358079] [drm] Connector 2:
[ 3.358079] [drm] VGA-1
[ 3.358080] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 3.358080] [drm] Encoders:
[ 3.358081] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 3.369831] clocksource: Switched to clocksource tsc
[ 3.387939] Adding 29295612k swap on /dev/sda1. Priority:-1 extents:1 across:29295612k FS
[ 3.417115] [drm] fb mappable at 0xC034D000
[ 3.417116] [drm] vram apper at 0xC0000000
[ 3.417116] [drm] size 5242880
[ 3.417117] [drm] fb depth is 24
[ 3.417118] [drm] pitch is 5120
[ 3.417190] fbcon: radeondrmfb (fb0) is primary device
[ 3.437707] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.456246] Console: switching to colour frame buffer device 160x64
[ 3.461555] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 3.474441] [drm] Initialized radeon 2.48.0 20080528 for 0000:01:00.0 on minor 0
[ 3.484331] random: crng init done
[ 19.465335] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 19.933491] input: lircd-uinput as /devices/virtual/input/input11
[ 20.105976] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 20.106475] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
[ 20.232031] r8169 0000:03:00.0 enp3s0: link down
[ 20.232070] r8169 0000:03:00.0 enp3s0: link down
[ 20.232093] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 21.866633] r8169 0000:03:00.0 enp3s0: link up
[ 21.866646] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 39.974442] fuse init (API version 7.26)
Reply to: