[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#870185: Acknowledgement (FATAL: kernel 4.11.0-0.bpo.1-marvell does not boot on QNAP TS-219P II)



I was able to get debug output from the failed kernel boot by adding the "earlycon" bootarg:

Marvell>> setenv bootargs earlycon console=ttyS0,115200 root=/dev/ram initrd=0xa00000,0x900000 ramdisk=34816 coherent_pool=1M
Marvell>> boot
Send Cmd : 0x68 to UART1
## Booting image at 00800000 ...
   Image Name:   kernel 4.11.0-0.bpo.1-marvell
   Created:      2017-07-30  18:55:56 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2076472 Bytes =  2 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.11.0-0.bpo.1-marvell (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 Debian 4.11.6-1~bpo9+1 (2017-07-09)
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] OF: fdt: Machine model: QNAP TS219 family
[    0.000000] earlycon: ns16550a0 at MMIO 0xf1012000 (options '')
[    0.000000] bootconsole [ns16550a0] enabled
[    0.000000] Memory policy: Data cache writeback
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: earlycon console=ttyS0,115200 root=/dev/ram initrd=0xa00000,0x900000 ramdisk=34816 coherent_pool=1M
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 502648K/524288K available (4096K kernel code, 398K rwdata, 1132K rodata, 1024K init, 248K bss, 21640K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0500000   (5088 kB)
[    0.000000]       .init : 0xc0700000 - 0xc0800000   (1024 kB)
[    0.000000]       .data : 0xc0800000 - 0xc0863940   ( 399 kB)
[    0.000000]        .bss : 0xc0863940 - 0xc08a1a20   ( 249 kB)
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[    0.000006] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[    0.008120] Console: colour dummy device 80x30
[    0.012582] Calibrating delay loop... 1974.27 BogoMIPS (lpj=3948544)
[    0.034147] pid_max: default: 32768 minimum: 301
[    0.038878] Security Framework initialized
[    0.042982] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.049673] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.056280] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.063979] CPU: Testing write buffer coherency: ok
[    0.068919] ftrace: allocating 17111 entries in 34 pages
[    0.096090] Setting up static identity map for 0x100000 - 0x10003c
[    0.102442] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1
[    0.109175] devtmpfs: initialized
[    0.114763] VFP support v0.3: not present
[    0.118905] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.128630] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.134879] pinctrl core: initialized pinctrl subsystem
[    0.140845] NET: Registered protocol family 16
[    0.146052] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.153770] cpuidle: using governor ladder
[    0.157881] cpuidle: using governor menu
[    0.162020] Feroceon L2: Enabling L2
[    0.165627] Feroceon L2: Cache support initialised.
[    0.170662] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set
[    0.183533] No ATAGs?
[    0.186478] clocksource: Switched to clocksource orion_clocksource
[    0.209676] VFS: Disk quotas dquot_6.6.0
[    0.213668] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.225645] NET: Registered protocol family 2
[    0.230581] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.237651] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    0.244118] TCP: Hash tables configured (established 4096 bind 4096)
[    0.250559] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.256390] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.262750] NET: Registered protocol family 1
[    0.267280] Unpacking initramfs...
[    0.270680] Initramfs unpacking failed: junk in compressed archive
[    0.304469] Freeing initrd memory: 9216K
[    0.308791] audit: initializing netlink subsys (disabled)
[    0.314507] audit: type=2000 audit(0.264:1): state=initialized audit_enabled=0 res=1
[    0.322241] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[    0.328728] zbud: loaded
[    0.332709] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.340185] io scheduler noop registered
[    0.344152] io scheduler cfq registered (default)
[    0.349547] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.356757] libphy: Fixed MDIO Bus: probed
[    0.360995] i2c /dev entries driver
[    0.364729] kirkwood-cpufreq kirkwood-cpufreq: Unable to get cpuclk
[    0.370996] kirkwood-cpufreq: probe of kirkwood-cpufreq failed with error -22
[    0.378254] ledtrig-cpu: registered to indicate activity on CPUs
[    0.384848] registered taskstats version 1
[    0.388973] zswap: loaded using pool lzo/zbud
[    0.393986] hctosys: unable to open rtc device (rtc0)
[    1.106495] random: fast init done
[    3.087516] Unable to handle kernel paging request at virtual address e0000004
[    3.094706] pgd = c0004000
[    3.097391] [e0000004] *pgd=00000000
[    3.100948] Internal error: Oops: 5 [#1] ARM
[    3.105194] Modules linked in:
[    3.108230] CPU: 0 PID: 1 Comm: swapper Not tainted 4.11.0-0.bpo.1-marvell #1 Debian 4.11.6-1~bpo9+1
[    3.117307] Hardware name: Marvell Kirkwood (Flattened Device Tree)
[    3.123537] task: df43f6a0 task.stack: df4a0000
[    3.128043] PC is at crc32_be+0xac/0x160
[    3.131943] LR is at 0xe0000000
[    3.135064] pc : [<c03149e0>]    lr : [<e0000000>]    psr: 80000053
[    3.135064] sp : df4a1ee0  ip : 00000007  fp : 00000000
[    3.146476] r10: c0730838  r9 : 00000000  r8 : c0863940
[    3.151669] r7 : 00000000  r6 : bfafa168  r5 : b2d5e10f  r4 : c0a5c3b0
[    3.158158] r3 : c052b470  r2 : b184c190  r1 : f0defde0  r0 : 0827764a
[    3.164647] Flags: Nzcv  IRQs on  FIQs off  Mode SVC_32  ISA ARM  Segment none
[    3.171826] Control: 0005397f  Table: 00004000  DAC: 00000053
[    3.177537] Process swapper (pid: 1, stack limit = 0xdf4a0190)
[    3.183334] Stack: (0xdf4a1ee0 to 0xdf4a2000)
[    3.187667] 1ee0: c0a5c3b0 f0defde7 c089db70 c0730834 c0863940 c0729144 c0729114 c080302c
[    3.195806] 1f00: ffffe000 c0101868 c0501d14 c080302c 00000011 c0863900 00000000 c0132ae0
[    3.203936] 1f20: dfffee53 dfffee61 0000003a c0132bec c088a0d0 c01424f0 c061a0a4 0000003a
[    3.212065] 1f40: 00000007 00000007 c061a52c c061a52c 00000000 6692af0e 0000003a 00000008
[    3.220196] 1f60: 0000003a c0863940 c0730834 c0863940 c0749f88 c0700e84 00000007 00000007
[    3.228326] 1f80: 00000000 c07005b8 00000000 c04bb468 00000000 00000000 00000000 00000000
[    3.236456] 1fa0: 00000000 c04bb478 00000000 c0107610 00000000 00000000 00000000 00000000
[    3.244586] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    3.252716] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000002
[    3.260860] [<c03149e0>] (crc32_be) from [<c0729144>] (of_fdt_raw_init+0x30/0x78)
[    3.268308] [<c0729144>] (of_fdt_raw_init) from [<c0101868>] (do_one_initcall+0x14c/0x180)
[    3.276534] [<c0101868>] (do_one_initcall) from [<c0700e84>] (kernel_init_freeable+0x1c8/0x20c)
[    3.285188] [<c0700e84>] (kernel_init_freeable) from [<c04bb478>] (kernel_init+0x10/0x10c)
[    3.293414] [<c04bb478>] (kernel_init) from [<c0107610>] (ret_from_fork+0x14/0x24)
[    3.300945] Code: e0230420 1afffff7 ebff8806 e8bd81f0 (e59e6004) 
[    3.307002] ---[ end trace 6cbbaa91fcb8bad3 ]---
[    3.311688] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[    3.311688] 
[    3.320775] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[    3.320775] 
[   53.658504] random: crng init done

The error appears to be:

[    3.087516] Unable to handle kernel paging request at virtual address e0000004
[    3.094706] pgd = c0004000
[    3.097391] [e0000004] *pgd=00000000
[    3.100948] Internal error: Oops: 5 [#1] ARM


Reply to: