Bug#868682: nouveau: nouveau_pmops_runtime_suspend / kworker/2:1:59 blocked for more than 120 seconds
Package: src:linux
Version: 4.11.6-1
Severity: important
File: nouveau
Dear Maintainer,
I performed a fresh installation from the 2017-07-04 daily d-i netinst on
amd64. After booting into the system, messages appeared on the console /
syslog about task kworker blocked for more than 120 seconds. The stack trace
most notably included nouveau_pmops_runtime_suspend as a likely culprit.
Shutting down or rebooting the system through normal means (e.g. shutdown
-(h|r)) would apparently never succeed, repeating a similar message.
I found an old thread[1] that recommended booting with nouveau.runpm=0, so
I tried that. It appears to have remedied the situation.
[1] https://lists.gt.net/linux/kernel/2312697
-- Package-specific info:
** Version:
Linux version 4.11.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.11.6-1 (2017-06-19)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.11.0-1-amd64 root=UUID=65cc09ff-bde8-4e73-9cb0-8bc3a5549087 ro nouveau.runpm=0 quiet
** Not tainted
** Kernel log:
[ 3.473899] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
[ 3.473900] ACPI: Power Button [PWRB]
[ 3.473932] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 3.473933] ACPI: Power Button [PWRF]
[ 3.474152] tpm_inf_pnp 00:09: Found TPM with ID IFX0102
[ 3.483453] wmi: Mapper loaded
[ 3.486381] EFI Variables Facility v0.08 2004-May-17
[ 3.488308] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.490255] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 3.493255] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 3.553070] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.553250] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 3.555977] iTCO_vendor_support: vendor-support=0
[ 3.557290] pstore: using zlib compression
[ 3.557820] pstore: Registered efi as persistent store backend
[ 3.558212] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 3.558950] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 3.559450] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.564518] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 3.564519] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 3.564519] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 3.564520] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 3.564520] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 3.564521] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 3.578328] ppdev: user-space parallel port driver
[ 3.579138] [drm] Memory usable by graphics device = 4096M
[ 3.579140] checking generic (f0000000 760000) vs hw (1ff0000000 10000000)
[ 3.579141] [drm] Replacing VGA console driver
[ 3.579427] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[ 3.579593] checking generic (f0000000 760000) vs hw (c0000000 10000000)
[ 3.579594] checking generic (f0000000 760000) vs hw (d0000000 2000000)
[ 3.580063] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: user_xattr
[ 3.580125] nouveau 0000:01:00.0: NVIDIA GP107 (137000a1)
[ 3.611506] hp_wmi: query 0x4 returned error 0x5
[ 3.636319] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.636319] [drm] Driver supports precise vblank timestamp query.
[ 3.668908] intel_rapl: Found RAPL domain package
[ 3.668908] intel_rapl: Found RAPL domain core
[ 3.668909] intel_rapl: Found RAPL domain uncore
[ 3.668909] intel_rapl: Found RAPL domain dram
[ 3.690086] nouveau 0000:01:00.0: bios: version 86.07.39.00.0b
[ 3.691359] hp_wmi: query 0x4 returned error 0x5
[ 3.692510] hp_wmi: query 0xd returned error 0x5
[ 3.692537] input: HP WMI hotkeys as /devices/virtual/input/input9
[ 3.693753] nouveau 0000:01:00.0: fb: 2048 MiB GDDR5
[ 3.693761] nouveau 0000:01:00.0: priv: HUB0: 00d054 00000007 (1f408216)
[ 3.693914] hp_wmi: query 0x5 returned error 0x3
[ 3.694939] [TTM] Zone kernel: Available graphics memory: 8108870 kiB
[ 3.694939] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 3.694939] [TTM] Initializing pool allocator
[ 3.694941] [TTM] Initializing DMA pool allocator
[ 3.694950] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[ 3.694951] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 3.694952] nouveau 0000:01:00.0: DRM: BIT table 'A' not found
[ 3.694953] nouveau 0000:01:00.0: DRM: BIT table 'L' not found
[ 3.694953] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 3.694954] nouveau 0000:01:00.0: DRM: DCB version 4.1
[ 3.694955] nouveau 0000:01:00.0: DRM: DCB outp 00: 01800f56 04600020
[ 3.694956] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000f52 04620020
[ 3.694956] nouveau 0000:01:00.0: DRM: DCB outp 02: 01811f46 04600010
[ 3.694957] nouveau 0000:01:00.0: DRM: DCB outp 03: 01011f42 04620010
[ 3.694957] nouveau 0000:01:00.0: DRM: DCB outp 04: 02822f76 04600020
[ 3.694958] nouveau 0000:01:00.0: DRM: DCB outp 05: 02022f72 00020020
[ 3.694958] nouveau 0000:01:00.0: DRM: DCB conn 00: 00002046
[ 3.694959] nouveau 0000:01:00.0: DRM: DCB conn 01: 00001146
[ 3.694959] nouveau 0000:01:00.0: DRM: DCB conn 02: 00020246
[ 3.694960] nouveau 0000:01:00.0: DRM: Pointer to flat panel table invalid
[ 3.696968] i915 0000:00:02.0: firmware: direct-loading firmware i915/skl_dmc_ver1_26.bin
[ 3.697240] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26)
[ 3.710556] hp_wmi: query 0x1b returned error 0x3
[ 3.710996] nouveau 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[ 3.710998] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 3.768007] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.768007] [drm] Driver supports precise vblank timestamp query.
[ 3.768165] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: user_xattr
[ 3.884580] nouveau 0000:01:00.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 3.922066] nouveau 0000:01:00.0: DRM: failed to create kernel channel, -22
[ 3.979946] [drm] failed to retrieve link info, disabling eDP
[ 3.980346] i915 0000:00:02.0: firmware: failed to load i915/skl_huc_ver01_07_1398.bin (-2)
[ 3.980408] i915 0000:00:02.0: Direct firmware load for i915/skl_huc_ver01_07_1398.bin failed with error -2
[ 3.980409] [drm] Failed to fetch valid uC firmware from i915/skl_huc_ver01_07_1398.bin (error -2)
[ 3.981316] [drm] GuC firmware load skipped
[ 3.996511] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 4.064075] random: crng init done
[ 4.148259] [drm] Cannot find any crtc or sizes - going 1024x768
[ 4.149901] nouveau 0000:01:00.0: DRM: allocated 1024x768 fb: 0x60000, bo ffff99ffeb379800
[ 4.152273] checking generic (f0000000 760000) vs hw (0 0)
[ 4.152404] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
[ 4.188296] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[ 4.188694] [drm] Initialized i915 1.6.0 20170123 for 0000:00:02.0 on minor 0
[ 4.197232] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.197567] acpi device:07: registered as cooling_device9
[ 4.197618] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 4.225834] checking generic (f0000000 760000) vs hw (1ff0000000 10000000)
[ 4.225914] fbcon: inteldrmfb (fb2) is primary device
[ 4.225914] fbcon: Remapping primary device, fb2, to tty 1-63
[ 5.824632] [drm] RC6 on
[ 6.574169] i915 0000:00:02.0: fb2: inteldrmfb frame buffer device
[ 6.866732] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 6.866791] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
** Model information
sys_vendor: HP
product_name: HP Z240 Tower Workstation
product_version:
chassis_vendor: HP
chassis_version:
bios_vendor: HP
bios_version: N51 Ver. 01.58
board_vendor: HP
board_name: 802F
board_version:
** Loaded modules:
intel_rapl
x86_pkg_temp_thermal
intel_powerclamp
coretemp
kvm_intel
kvm
irqbypass
crct10dif_pclmul
crc32_pclmul
hp_wmi
sparse_keymap
rfkill
nouveau
ghash_clmulni_intel
nls_ascii
ppdev
i915
intel_cstate
mxm_wmi
nls_cp437
intel_uncore
ttm
vfat
fat
joydev
iTCO_wdt
drm_kms_helper
efi_pstore
iTCO_vendor_support
evdev
intel_rapl_perf
sg
mei_me
drm
i2c_algo_bit
mei
intel_pch_thermal
shpchp
serio_raw
efivars
wmi
parport_pc
parport
video
tpm_infineon
button
acpi_pad
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
jbd2
crc32c_generic
fscrypto
ecb
mbcache
sr_mod
sd_mod
cdrom
hid_generic
usbhid
hid
crc32c_intel
aesni_intel
aes_x86_64
crypto_simd
cryptd
glue_helper
ahci
libahci
e1000e
xhci_pci
psmouse
ptp
xhci_hcd
libata
pps_core
i2c_i801
nvme
nvme_core
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Skylake Host Bridge/DRAM Registers [8086:191f] (rev 07)
Subsystem: Hewlett-Packard Company Skylake Host Bridge/DRAM Registers [103c:802f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: skl_uncore
00:01.0 PCI bridge [0604]: Intel Corporation Skylake PCIe Controller (x16) [8086:1901] (rev 07) (prog-if 00 [Normal decode])
Physical Slot: 2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 122
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d3000000-d40fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 530 [8086:1912] (rev 06) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company HD Graphics 530 [103c:802f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 137
Region 0: Memory at d2000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at 1ff0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller [8086:a12f] (rev 31) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company Sunrise Point-H USB 3.0 xHCI Controller [103c:802f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 125
Region 0: Memory at d4220000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-H Thermal subsystem [8086:a131] (rev 31)
Subsystem: Hewlett-Packard Company Sunrise Point-H Thermal subsystem [103c:802f]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d4236000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-H CSME HECI #1 [8086:a13a] (rev 31)
Subsystem: Hewlett-Packard Company Sunrise Point-H CSME HECI [103c:802f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 135
Region 0: Memory at d4237000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:16.3 Serial controller [0700]: Intel Corporation Sunrise Point-H KT Redirection [8086:a13d] (rev 31) (prog-if 02 [16550])
Subsystem: Hewlett-Packard Company Sunrise Point-H KT Redirection [103c:802f]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
Region 0: I/O ports at 4080 [size=8]
Region 1: Memory at d423b000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-H SATA controller [AHCI mode] [8086:a102] (rev 31) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Sunrise Point-H SATA controller [AHCI mode] [103c:802f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 127
Region 0: Memory at d4234000 (32-bit, non-prefetchable) [size=8K]
Region 1: Memory at d423a000 (32-bit, non-prefetchable) [size=256]
Region 2: I/O ports at 4088 [size=8]
Region 3: I/O ports at 4090 [size=4]
Region 4: I/O ports at 4060 [size=32]
Region 5: Memory at d4238000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1b.0 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Root Port #17 [8086:a167] (rev f1) (prog-if 00 [Normal decode])
Physical Slot: 6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 123
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: d4100000-d41fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-H LPC Controller [8086:a149] (rev 31)
Subsystem: Hewlett-Packard Company Sunrise Point-H LPC Controller [103c:802f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-H PMC [8086:a121] (rev 31)
Subsystem: Hewlett-Packard Company Sunrise Point-H PMC [103c:802f]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at d4230000 (32-bit, non-prefetchable) [disabled] [size=16K]
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-H SMBus [8086:a123] (rev 31)
Subsystem: Hewlett-Packard Company Sunrise Point-H SMBus [103c:802f]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4239000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (2) I219-LM [8086:15b7] (rev 31)
Subsystem: Hewlett-Packard Company Ethernet Connection (2) I219-LM [103c:802f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 126
Region 0: Memory at d4200000 (32-bit, non-prefetchable) [size=128K]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:1cb3] (rev a1) (prog-if 00 [VGA controller])
Subsystem: NVIDIA Corporation Device [10de:11be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 136
Region 0: Memory at d3000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at 3000 [size=128]
Expansion ROM at d4080000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nouveau
01:00.1 Audio device [0403]: NVIDIA Corporation Device [10de:0fb9] (rev a1)
Subsystem: NVIDIA Corporation Device [10de:11be]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 255
Region 0: Memory at d4000000 (32-bit, non-prefetchable) [disabled] [size=16K]
Capabilities: <access denied>
Kernel modules: snd_hda_intel
02:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 [144d:a804] (prog-if 02 [NVM Express])
Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 [144d:a801]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at d4100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 03f0:134a Hewlett-Packard Optical Mouse
Bus 001 Device 002: ID 03f0:344a Hewlett-Packard
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: buster/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 4.11.0-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.11.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.130
ii kmod 24-1
ii linux-base 4.5
Versions of packages linux-image-4.11.0-1-amd64 recommends:
pn firmware-linux-free <none>
pn irqbalance <none>
Versions of packages linux-image-4.11.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.02-2
pn linux-doc-4.11 <none>
Versions of packages linux-image-4.11.0-1-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20161130-3
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: