Bug#867634: linux-image-4.9.0-3-amd64: Repeated ESATA softreset failed messages - even after replacing most components.
Package: src:linux
Version: 4.9.30-2+deb9u2
Severity: normal
Dear Maintainer,
* What led up to the situation?
On a hot day two drives in my eSATA connected Sandisk TowerRAID TR8M+B failed. After removing the drives I'm receiving repeated softreset messages - even with entirely new equipment (except for the server itself)
This system worked without issue for almost a year. Previous incarnations (another server with same NAS) worked for even longer.
The messages received in dmesg (and across the screen) are:
[ 258.182103] ata3: link is slow to respond, please be patient (ready=0)
[ 282.190796] ata3: softreset failed (device not ready)
[ 282.190862] ata3: limiting SATA link speed to 1.5 Gbps
[ 282.190864] ata3: hard resetting link
[ 282.914095] ata3: SATA link down (SStatus 100 SControl 310)
[ 282.914104] ata3: EH complete
[ 282.915391] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 282.915460] ata3: irq_stat 0x80000040, connection status changed
[ 282.915522] ata3: SError: { CommWake DevExch }
[ 282.915579] ata3: hard resetting link
[ 290.005120] device vlan35 entered promiscuous mode
[ 290.005132] device eth0 entered promiscuous mode
[ 292.932185] ata3: softreset failed (device not ready)
[ 292.932251] ata3: hard resetting link
[ 299.197731] ata3: failed to reset engine (errno=-5)
[ 303.429384] ata3: softreset failed (1st FIS failed)
[ 303.429452] ata3: hard resetting link
[ 310.194426] ata3: failed to reset engine (errno=-5)
[ 338.896868] ata3: softreset failed (1st FIS failed)
[ 338.896943] ata3: limiting SATA link speed to 1.5 Gbps
[ 338.896945] ata3: hard resetting link
[ 340.119629] ata3: SATA link down (SStatus 100 SControl 310)
[ 340.119640] ata3: EH complete
[ 340.120968] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 340.121048] ata3: irq_stat 0x80000040, connection status changed
[ 340.121114] ata3: SError: { CommWake DevExch }
[ 340.121179] ata3: hard resetting link
[ 350.137287] ata3: softreset failed (device not ready)
[ 350.137359] ata3: hard resetting link
[ 356.402847] ata3: failed to reset engine (errno=-5)
[ 360.626520] ata3: softreset failed (1st FIS failed)
[ 360.626587] ata3: hard resetting link
[ 372.094712] ata3: link is slow to respond, please be patient (ready=0)
[ 395.594524] ata3: softreset failed (device not ready)
[ 395.594592] ata3: limiting SATA link speed to 1.5 Gbps
[ 395.594594] ata3: hard resetting link
[ 396.317785] ata3: SATA link down (SStatus 100 SControl 310)
[ 396.317797] ata3: EH complete
[ 396.319185] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 396.319263] ata3: irq_stat 0x80000040, connection status changed
[ 396.319326] ata3: SError: { CommWake DevExch }
[ 396.319389] ata3: hard resetting link
[ 402.579341] ata3: failed to reset engine (errno=-5)
[ 406.818948] ata3: softreset failed (1st FIS failed)
[ 406.819017] ata3: hard resetting link
[ 416.844648] ata3: softreset failed (device not ready)
* What exactly did you do (or not do) that was effective (or
ineffective)?
The following actions have been taken so far, none of which are successful:
- Upgraded Dell R210 II's BIOS
- Purchased an entirely new Sandisk TowerRAID TR8M+B
- Replaced the eSATA card - moving from SIL chipset to Marvell
- Replaced all hard drives with brand new 3TB drives.
- Upgraded OS from Debian Jessie to Debian Stretch
- Ensured BIOS was set for maximum performance and not power saving.
- Added noapic, acpi=off, and apm=off kernel parameter options.
- Performed a full on-board health check (part of the Dell on-board management abilities), finding no issues.
- Performed an extensive memory test, finding no issues.
* What was the outcome of this action?
None of the above have helped fix or alter this issue.
* What outcome did you expect instead?
The timeouts are preventing the external eSATA drives from functioning.
-- Package-specific info:
** Version:
Linux version 4.9.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u2 (2017-06-26)
** Command line:
BOOT_IMAGE=/vmlinuz-4.9.0-3-amd64 root=/dev/mapper/qub4rt-rootfs ro noapic acpi=off apm=off
** Not tainted
** Kernel log:
Unable to read kernel log; any relevant messages should be attached
** Model information
sys_vendor: Dell Inc.
product_name: PowerEdge R210 II
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: 2.2.3
board_vendor: Dell Inc.
board_name: 03X6X0
board_version: A00
** Loaded modules:
nf_conntrack_ipv6
nf_defrag_ipv6
ip6table_filter
ip6_tables
ipt_MASQUERADE
nf_nat_masquerade_ipv4
xt_nat
iptable_nat
nf_nat_ipv4
nf_nat
xt_TCPMSS
nf_conntrack_ipv4
nf_defrag_ipv4
xt_mac
ipt_REJECT
nf_reject_ipv4
xfrm_user
xt_policy
xt_comment
xfrm4_tunnel
tunnel4
xt_tcpudp
ipcomp
xfrm_ipcomp
xt_conntrack
esp4
nf_conntrack
ah4
binfmt_misc
af_key
xfrm_algo
iptable_filter
ip_gre
ip_tunnel
gre
8021q
garp
mrp
stp
llc
iTCO_wdt
iTCO_vendor_support
joydev
evdev
intel_rapl
x86_pkg_temp_thermal
mgag200
intel_powerclamp
coretemp
kvm_intel
ttm
kvm
irqbypass
drm_kms_helper
crct10dif_pclmul
crc32_pclmul
ghash_clmulni_intel
drm
intel_cstate
dcdbas
i2c_algo_bit
sg
intel_uncore
shpchp
ie31200_edac
lpc_ich
mfd_core
edac_core
intel_rapl_perf
pcspkr
nfsd
auth_rpcgss
oid_registry
nfs_acl
lockd
grace
sunrpc
parport_pc
ppdev
lp
parport
ip_tables
x_tables
autofs4
ext4
crc16
jbd2
fscrypto
ecb
mbcache
raid10
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
async_tx
xor
raid6_pq
libcrc32c
crc32c_generic
raid0
multipath
linear
dm_mod
raid1
md_mod
ata_generic
hid_generic
sd_mod
usbhid
hid
crc32c_intel
aesni_intel
ahci
libahci
pata_marvell
aes_x86_64
glue_helper
lrw
gf128mul
ablk_helper
cryptd
i2c_i801
i2c_smbus
bnx2
libata
scsi_mod
ehci_pci
ehci_hcd
usbcore
usb_common
** Network interface configuration:
source /etc/network/interfaces.d/*
auto lo lo:1
iface lo inet loopback
iface lo:1 inet static
address 9.9.9.9
netmask 255.255.255.255
auto eth0
iface eth0 inet static
address 192.168.32.1
netmask 255.255.255.0
network 192.168.32.0
broadcast 192.168.32.255
auto vlan33
iface vlan33 inet static
address 192.168.33.1
netmask 255.255.255.0
network 192.168.33.0
vlan_raw_device eth0
auto vlan34
iface vlan34 inet static
address 192.168.34.1
netmask 255.255.255.0
network 192.168.34.0
vlan_raw_device eth0
auto vlan35
iface vlan35 inet static
address 192.168.35.1
netmask 255.255.255.0
network 192.168.35.0
vlan_raw_device eth0
auto vlan40
iface vlan40 inet static
address 192.168.40.1
netmask 255.255.255.0
network 192.168.40.0
vlan_raw_device eth0
auto vlan2
iface vlan2 inet static
address 192.168.31.3
netmask 255.255.255.248
network 192.168.31.0
vlan_raw_device eth1
auto vlan3
iface vlan3 inet static
address 0.0.0.0
netmask 0.0.0.0
vlan_raw_device eth1
auto vlan300
iface vlan300 inet static
address 66.59.115.2
netmask 255.255.255.0
vlan_raw_device eth1
bridge_stp off
auto vlan300:1
iface vlan300:1 inet static
address 192.168.31.9
netmask 255.255.255.252
network 192.168.31.8
auto vlan300:2
iface vlan300:2 inet static
address 192.168.88.2
netmask 255.255.255.0
network 192.168.88.0
auto vlan305
iface vlan305 inet static
address 192.168.31.13
netmask 255.255.255.252
network 192.168.31.12
vlan_raw_device eth1
bridge_stp off
iface dsl-provider inet ppp
provider dsl-provider
pre-up /sbin/ifconfig eth1 up # line maintained by pppoeconf
auto net_vps
iface net_vps inet static
address 192.168.255.2
netmask 255.255.255.252
pre-up /sbin/ip tunnel add net_vps mode gre remote 208.82.113.93 local 66.59.109.44
iface sixxs inet6 v4tunnel
address 2001:4978:f:29a::2
netmask 64
endpoint 216.14.98.22
ttl 64
up ip link set mtu 1280 dev sixxs
auto homework0
iface homework0 inet static
address 192.168.254.1
netmask 255.255.255.252
pre-up /sbin/ip tunnel add homework0 mode gre remote 192.168.254.6 local 192.168.254.5
pre-up /sbin/ip link set homework0 mtu 1420 up
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet 9.9.9.9/32 brd 9.9.9.9 scope global lo:1
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether d4:ae:52:c0:1c:ca brd ff:ff:ff:ff:ff:ff
inet 192.168.32.1/24 brd 192.168.32.255 scope global eth0
valid_lft forever preferred_lft forever
inet 192.168.32.3/32 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::d6ae:52ff:fec0:1cca/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether d4:ae:52:c0:1c:cb brd ff:ff:ff:ff:ff:ff
inet6 fe80::d6ae:52ff:fec0:1ccb/64 scope link
valid_lft forever preferred_lft forever
4: vlan33@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether d4:ae:52:c0:1c:ca brd ff:ff:ff:ff:ff:ff
inet 192.168.33.1/24 brd 192.168.33.255 scope global vlan33
valid_lft forever preferred_lft forever
inet6 fe80::d6ae:52ff:fec0:1cca/64 scope link
valid_lft forever preferred_lft forever
5: vlan34@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether d4:ae:52:c0:1c:ca brd ff:ff:ff:ff:ff:ff
inet 192.168.34.1/24 brd 192.168.34.255 scope global vlan34
valid_lft forever preferred_lft forever
inet 192.168.34.3/32 scope global vlan34
valid_lft forever preferred_lft forever
inet6 fe80::d6ae:52ff:fec0:1cca/64 scope link
valid_lft forever preferred_lft forever
6: vlan35@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether d4:ae:52:c0:1c:ca brd ff:ff:ff:ff:ff:ff
inet 192.168.35.1/24 brd 192.168.35.255 scope global vlan35
valid_lft forever preferred_lft forever
inet 192.168.35.3/32 scope global vlan35
valid_lft forever preferred_lft forever
inet6 fe80::d6ae:52ff:fec0:1cca/64 scope link
valid_lft forever preferred_lft forever
7: vlan40@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether d4:ae:52:c0:1c:ca brd ff:ff:ff:ff:ff:ff
inet 192.168.40.1/24 brd 192.168.40.255 scope global vlan40
valid_lft forever preferred_lft forever
inet6 fe80::d6ae:52ff:fec0:1cca/64 scope link
valid_lft forever preferred_lft forever
8: vlan2@eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether d4:ae:52:c0:1c:cb brd ff:ff:ff:ff:ff:ff
inet 192.168.31.3/29 brd 192.168.31.7 scope global vlan2
valid_lft forever preferred_lft forever
inet6 fe80::d6ae:52ff:fec0:1ccb/64 scope link
valid_lft forever preferred_lft forever
9: vlan3@eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether d4:ae:52:c0:1c:cb brd ff:ff:ff:ff:ff:ff
inet6 fe80::d6ae:52ff:fec0:1ccb/64 scope link
valid_lft forever preferred_lft forever
10: vlan300@eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether d4:ae:52:c0:1c:cb brd ff:ff:ff:ff:ff:ff
inet 66.59.115.2/24 brd 66.59.115.255 scope global vlan300
valid_lft forever preferred_lft forever
inet 192.168.31.9/30 brd 192.168.31.11 scope global vlan300:1
valid_lft forever preferred_lft forever
inet 192.168.88.2/24 brd 192.168.88.255 scope global vlan300:2
valid_lft forever preferred_lft forever
inet6 fe80::d6ae:52ff:fec0:1ccb/64 scope link
valid_lft forever preferred_lft forever
11: vlan305@eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether d4:ae:52:c0:1c:cb brd ff:ff:ff:ff:ff:ff
inet 192.168.31.13/30 brd 192.168.31.15 scope global vlan305
valid_lft forever preferred_lft forever
inet6 fe80::d6ae:52ff:fec0:1ccb/64 scope link
valid_lft forever preferred_lft forever
12: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN group default qlen 1
link/gre 0.0.0.0 brd 0.0.0.0
13: gretap0@NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN group default qlen 1000
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
14: net_vps@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1476 qdisc noqueue state UNKNOWN group default qlen 1
link/gre 66.59.109.44 peer 208.82.113.93
inet 192.168.255.2/30 brd 192.168.255.3 scope global net_vps
valid_lft forever preferred_lft forever
inet6 fe80::200:5efe:423b:6d2c/64 scope link
valid_lft forever preferred_lft forever
15: homework0@NONE: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1420 qdisc noqueue state UNKNOWN group default qlen 1
link/gre 192.168.254.5 peer 192.168.254.6
inet 192.168.254.1/30 brd 192.168.254.3 scope global homework0
valid_lft forever preferred_lft forever
inet6 2607:f620:400:1::4/126 scope global
valid_lft forever preferred_lft forever
inet6 fe80::5efe:c0a8:fe05/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
vlan3: 0 0 0 0 0 0 0 0 27720 50 0 0 0 0 0 0
vlan35: 112254 1474 0 0 0 0 0 22 506933 5808 0 0 0 0 0 0
homework0: 0 0 0 0 0 0 0 0 0 0 568 0 0 0 568 0
vlan2: 1029848 15485 0 0 0 0 0 0 442131 7039 0 0 0 0 0 0
eth1: 501837043 471829 0 0 0 0 0 2128 29407896 275398 0 0 0 0 0 0
vlan33: 352150 5502 0 0 0 0 0 5496 57867 167 0 0 0 0 0 0
eth0: 34000816 345852 0 0 0 0 0 5777 501747916 484657 0 0 0 0 0 0
lo: 112853 1289 0 0 0 0 0 0 112853 1289 0 0 0 0 0 0
net_vps: 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1 0
vlan300: 489836654 447495 0 0 0 0 0 1642 26592838 267997 0 0 0 0 0 0
gre0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
vlan40: 0 0 0 0 0 0 0 0 60135 172 0 0 0 0 0 0
vlan34: 3665500 22272 0 0 0 0 0 241 18098357 29640 0 0 0 0 0 0
vlan305: 0 0 0 0 0 0 0 0 53022 152 0 0 0 0 0 0
gretap0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
Forwarding: 1
757564 total packets received
88 with invalid headers
636126 forwarded
0 incoming packets discarded
114331 incoming packets delivered
758614 requests sent out
99 outgoing packets dropped
16 dropped because of missing route
1 fragments dropped after timeout
11 reassemblies required
3 packets reassembled ok
1 packet reassemblies failed
3 fragments received ok
9 fragments created
Icmp:
13461 ICMP messages received
743 input ICMP message failed
ICMP input histogram:
destination unreachable: 1170
echo requests: 1319
echo replies: 10972
13615 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 1276
time exceeded: 1
echo requests: 11019
echo replies: 1319
IcmpMsg:
InType0: 10972
InType3: 1170
InType8: 1319
OutType0: 1319
OutType3: 1276
OutType8: 11019
OutType11: 1
Tcp:
210 active connection openings
17792 passive connection openings
17 failed connection attempts
558 connection resets received
4 connections established
86910 segments received
81855 segments sent out
739 segments retransmitted
0 bad segments received
219 resets sent
Udp:
8550 packets received
3 packets to unknown port received
0 packet receive errors
9053 packets sent
0 receive buffer errors
0 send buffer errors
IgnoredMulti: 8
UdpLite:
TcpExt:
1 resets received for embryonic SYN_RECV sockets
14105 TCP sockets finished time wait in fast timer
97 delayed acks sent
Quick ack mode was activated 2 times
367 SYNs to LISTEN sockets dropped
23 packets directly queued to recvmsg prequeue
TCPDirectCopyFromPrequeue: 5
10110 packet headers predicted
18381 acknowledgments not containing data payload received
2513 predicted acknowledgments
TCPTimeouts: 368
TCPLossProbes: 5
TCPDSACKOldSent: 2
TCPDSACKRecv: 1
5 connections reset due to unexpected data
8 connections reset due to early user close
TCPRcvCoalesce: 28
TCPOFOQueue: 33
TCPAutoCorking: 876
TCPSynRetrans: 734
TCPOrigDataSent: 22014
TCPHystartTrainDetect: 1
TCPHystartTrainCwnd: 16
IpExt:
InMcastPkts: 7813
OutMcastPkts: 18606
InBcastPkts: 746
OutBcastPkts: 593
InOctets: 516545707
OutOctets: 1023457896
InMcastOctets: 620269
OutMcastOctets: 1367952
InBcastOctets: 160999
OutBcastOctets: 85999
InNoECTPkts: 758720
InECT0Pkts: 6
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 Processor Family DRAM Controller [8086:0108] (rev 09)
Subsystem: Dell Xeon E3-1200 Processor Family DRAM Controller [1028:04dd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: ie31200_edac
Kernel modules: ie31200_edac
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c5100000-c51fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell 6 Series/C200 Series Chipset Family USB Enhanced Host Controller [1028:04dd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 14
Region 0: Memory at c5206000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: c0000000-c3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell 6 Series/C200 Series Chipset Family USB Enhanced Host Controller [1028:04dd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 15
Region 0: Memory at c5205000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: c4800000-c50fffff
Prefetchable memory behind bridge: 00000000c4000000-00000000c47fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation C202 Chipset Family LPC Controller [8086:1c52] (rev 04)
Subsystem: Dell C202 Chipset Family LPC Controller [1028:04dd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller [8086:1c02] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Dell 6 Series/C200 Series Chipset Family SATA AHCI Controller [1028:04dd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 26
Region 0: I/O ports at 3048 [size=8]
Region 1: I/O ports at 3054 [size=4]
Region 2: I/O ports at 3040 [size=8]
Region 3: I/O ports at 3050 [size=4]
Region 4: I/O ports at 3020 [size=32]
Region 5: Memory at c5204000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04)
Subsystem: Dell 6 Series/C200 Series Chipset Family SMBus Controller [1028:04dd]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 6
Region 0: Memory at c5202000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 3000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9120 SATA 6Gb/s Controller [1b4b:9120] (rev 20) (prog-if 01 [AHCI 1.0])
Subsystem: Marvell Technology Group Ltd. 88SE9120 SATA 6Gb/s Controller [1b4b:9120]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at 2048 [size=8]
Region 1: I/O ports at 205c [size=4]
Region 2: I/O ports at 2040 [size=8]
Region 3: I/O ports at 2058 [size=4]
Region 4: I/O ports at 2000 [size=32]
Region 5: Memory at c5101000 (32-bit, non-prefetchable) [size=2K]
Expansion ROM at c5110000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
01:00.1 IDE interface [0101]: Marvell Technology Group Ltd. 88SE912x IDE Controller [1b4b:91a4] (rev 20) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Marvell Technology Group Ltd. 88SE912x IDE Controller [1b4b:91a4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at 2038 [size=8]
Region 1: I/O ports at 2054 [size=4]
Region 2: I/O ports at 2030 [size=8]
Region 3: I/O ports at 2050 [size=4]
Region 4: I/O ports at 2020 [size=16]
Region 5: Memory at c5100000 (32-bit, non-prefetchable) [size=16]
Expansion ROM at c5120000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: pata_marvell
Kernel modules: pata_marvell, ata_generic
02:00.0 Ethernet controller [0200]: Broadcom Limited NetXtreme II BCM5716 Gigabit Ethernet [14e4:163b] (rev 20)
Subsystem: Dell NetXtreme II BCM5716 Gigabit Ethernet [1028:04dd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: <access denied>
Kernel driver in use: bnx2
Kernel modules: bnx2
02:00.1 Ethernet controller [0200]: Broadcom Limited NetXtreme II BCM5716 Gigabit Ethernet [14e4:163b] (rev 20)
Subsystem: Dell NetXtreme II BCM5716 Gigabit Ethernet [1028:04dd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at c2000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: <access denied>
Kernel driver in use: bnx2
Kernel modules: bnx2
03:03.0 VGA compatible controller [0300]: Matrox Electronics Systems Ltd. MGA G200eW WPCM450 [102b:0532] (rev 0a) (prog-if 00 [VGA controller])
Subsystem: Dell MGA G200eW WPCM450 [1028:04dd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (4000ns min, 8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 6
Region 0: Memory at c4000000 (32-bit, prefetchable) [size=8M]
Region 1: Memory at c5000000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at c4800000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: mgag200
Kernel modules: mgag200
** USB devices:
Bus 002 Device 004: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 002 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0624:0248 Avocent Corp. Virtual Hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 9.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.9.0-3-amd64 (SMP w/1 CPU core)
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
ANSI_X3.4-1968), LANGUAGE=en_US (charmap=locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.9.0-3-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.130
ii kmod 23-2
ii linux-base 4.5
Versions of packages linux-image-4.9.0-3-amd64 recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2.3
Versions of packages linux-image-4.9.0-3-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta3-5
pn linux-doc-4.9 <none>
Versions of packages linux-image-4.9.0-3-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
ii firmware-bnx2 20161130-3
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- debconf information:
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_US"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Reply to: