Bug#860784: linux-image-4.9.0-2-amd64: Hauppage WinTV Aero-M no longer works in kernel 4.9
Out of curiousity, I tried plugging my WinTV Aero-M into another system
I had just upgraded to stretch, and found that it was fully recognized.
The difference is that the other system uses the 686-pae kernel and
ehci-pci instead of xhci_hcd.
Apr 20 13:30:25 scuzzy kernel: [11823.736052] usb 3-6: new high-speed USB device number 3 using ehci-pci
Apr 20 13:30:25 scuzzy kernel: [11823.884874] usb 3-6: New USB device found, idVendor=2040, idProduct=c61b
Apr 20 13:30:25 scuzzy kernel: [11823.884881] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr 20 13:30:25 scuzzy kernel: [11823.884884] usb 3-6: Product: WinTV Aero-M
Apr 20 13:30:25 scuzzy kernel: [11823.884886] usb 3-6: Manufacturer: Hauppauge
Apr 20 13:30:25 scuzzy kernel: [11823.884888] usb 3-6: SerialNumber: 4034988989
Apr 20 13:30:25 scuzzy kernel: [11824.424407] usb 3-6: dvb_usb_v2: found a 'Hauppauge WinTV-Aero-M' in warm state
Apr 20 13:30:25 scuzzy kernel: [11824.427956] usb 3-6: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
Apr 20 13:30:25 scuzzy kernel: [11824.433486] DVB: registering new adapter (Hauppauge WinTV-Aero-M)
Apr 20 13:30:26 scuzzy kernel: [11825.025553] MxL111SF detected, v8_200 (0x18)
Apr 20 13:30:26 scuzzy kernel: [11825.035446] usb 3-6: DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3305 VSB/QAM Frontend)...
Apr 20 13:30:26 scuzzy kernel: [11825.035727] usb 3-6: DVB: registering adapter 0 frontend 1 (MaxLinear MxL111SF DVB-T demodulator)...
Apr 20 13:30:26 scuzzy kernel: [11825.040799] usb 3-6: DVB: registering adapter 0 frontend 2 (LG Electronics LG2161 ATSC/MH Frontend)...
Apr 20 13:30:26 scuzzy kernel: [11825.088554] tveeprom 7-0050: Hauppauge model 126001, rev F2G4, serial# 4034988989
Apr 20 13:30:26 scuzzy kernel: [11825.088563] tveeprom 7-0050: MAC address is 00:0d:fe:81:0b:bd
Apr 20 13:30:26 scuzzy kernel: [11825.088567] tveeprom 7-0050: tuner model is MaxLinear 111 (idx 164, type 4)
Apr 20 13:30:26 scuzzy kernel: [11825.088569] tveeprom 7-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
Apr 20 13:30:26 scuzzy kernel: [11825.088571] tveeprom 7-0050: audio processor is None (idx 0)
Apr 20 13:30:26 scuzzy kernel: [11825.088574] tveeprom 7-0050: has no radio, has IR receiver, has no IR transmitter
Apr 20 13:30:26 scuzzy kernel: [11825.088584] usb 3-6: dvb_usb_v2: 'Hauppauge WinTV-Aero-M' successfully initialized and connected
Apr 20 13:30:26 scuzzy kernel: [11825.088763] usbcore: registered new interface driver dvb_usb_mxl111sf
Apr 20 13:30:32 scuzzy kernel: [11831.064720] usb 3-6: USB disconnect, device number 3
Apr 20 13:30:32 scuzzy kernel: [11831.067881] usb 3-6: dvb_usb_v2: 'Hauppauge WinTV-Aero-M' successfully deinitialized and disconnected
^C
scuzzy:/home/stevev# uname -a
Linux scuzzy 4.9.0-2-686-pae #1 SMP Debian 4.9.18-1 (2017-03-30) i686 GNU/Linux
For comparision here is the output for a jessie kernel, also on 686-pae:
Apr 20 11:25:39 hexadecimal kernel: [3705894.940040] usb 6-5: new high-speed USB device number 7 using ehci-pci
Apr 20 11:25:39 hexadecimal kernel: [3705895.072918] usb 6-5: New USB device found, idVendor=2040, idProduct=c61b
Apr 20 11:25:39 hexadecimal kernel: [3705895.072923] usb 6-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr 20 11:25:39 hexadecimal kernel: [3705895.072924] usb 6-5: Product: WinTV Aero-M
Apr 20 11:25:39 hexadecimal kernel: [3705895.072926] usb 6-5: Manufacturer: Hauppauge
Apr 20 11:25:39 hexadecimal kernel: [3705895.072928] usb 6-5: SerialNumber: 4034988989
Apr 20 11:25:39 hexadecimal mtp-probe: checking bus 6, device 7: "/sys/devices/pci0000:00/0000:00:1d.7/usb6/6-5"
Apr 20 11:25:39 hexadecimal mtp-probe: bus: 6, device: 7 was not an MTP device
Apr 20 11:25:40 hexadecimal kernel: [3705896.407955] usb 6-5: dvb_usb_v2: found a 'Hauppauge WinTV-Aero-M' in warm state
Apr 20 11:25:40 hexadecimal kernel: [3705896.407995] usb 6-5: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
Apr 20 11:25:40 hexadecimal kernel: [3705896.408115] DVB: registering new adapter (Hauppauge WinTV-Aero-M)
Apr 20 11:25:41 hexadecimal kernel: [3705897.241179] MxL111SF detected, v8_200 (0x18)
Apr 20 11:25:41 hexadecimal kernel: [3705897.247519] usb 6-5: DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3305 VSB/QAM Frontend)...
Apr 20 11:25:41 hexadecimal kernel: [3705897.247589] usb 6-5: DVB: registering adapter 0 frontend 1 (MaxLinear MxL111SF DVB-T demodulator)...
Apr 20 11:25:41 hexadecimal kernel: [3705897.247728] usb 6-5: DVB: registering adapter 0 frontend 2 (LG Electronics LG2161 ATSC/MH Frontend)...
Apr 20 11:25:41 hexadecimal kernel: [3705897.270931] tveeprom 6-0050: Hauppauge model 126001, rev F2G4, serial# 8457149
Apr 20 11:25:41 hexadecimal kernel: [3705897.270934] tveeprom 6-0050: MAC address is 00:0d:fe:81:0b:bd
Apr 20 11:25:41 hexadecimal kernel: [3705897.270937] tveeprom 6-0050: tuner model is MaxLinear 111 (idx 164, type 4)
Apr 20 11:25:41 hexadecimal kernel: [3705897.270940] tveeprom 6-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
Apr 20 11:25:41 hexadecimal kernel: [3705897.270942] tveeprom 6-0050: audio processor is None (idx 0)
Apr 20 11:25:41 hexadecimal kernel: [3705897.270944] tveeprom 6-0050: has no radio, has IR receiver, has no IR transmitter
Apr 20 11:25:41 hexadecimal kernel: [3705897.270948] usb 6-5: dvb_usb_v2: 'Hauppauge WinTV-Aero-M' successfully initialized and connected
Apr 20 11:25:41 hexadecimal kernel: [3705897.270982] usbcore: registered new interface driver dvb_usb_mxl111sf
Apr 20 11:26:14 hexadecimal kernel: [3705930.097938] usb 6-5: USB disconnect, device number 7
Apr 20 11:26:14 hexadecimal kernel: [3705930.098360] usb 6-5: dvb_usb_v2: 'Hauppauge WinTV-Aero-M' successfully deinitialized and disconnected
hexadecimal:~# uname -a
Linux hexadecimal 3.16.0-4-686-pae #1 SMP Debian 3.16.39-1+deb8u2 (2017-03-07) i686 GNU/Linux
Reply to: