As promised, dmesg for both kernels.
root@cknowsvr01:/home/diederik# cat /proc/cmdline placeholder root=UUID=0e49acdd-69d2-4c95-a5fc-3e1f4daa9b65 ro quiet root@cknowsvr01:/home/diederik# dmesg [ 0.000000] Linux version 4.8.0-2-amd64 (debian-kernel@xxxxxxxxxxxxxxxx) (gcc version 5.4.1 20161202 (Debian 5.4.1-4) ) #1 SMP Debian 4.8.15-2 (2017-01-04) [ 0.000000] Command line: placeholder root=UUID=0e49acdd-69d2-4c95-a5fc-3e1f4daa9b65 ro quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] Released 0 page(s) [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] Xen: [mem 0x000000000009e800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000079cfbfff] usable [ 0.000000] Xen: [mem 0x0000000079cfc000-0x000000007b8c1fff] reserved [ 0.000000] Xen: [mem 0x000000007b8c2000-0x000000007b934fff] ACPI data [ 0.000000] Xen: [mem 0x000000007b935000-0x000000007bedffff] ACPI NVS [ 0.000000] Xen: [mem 0x000000007bee0000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000c7ffc000-0x00000000c7ffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec01fff] reserved [ 0.000000] Xen: [mem 0x00000000fec40000-0x00000000fec40fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x0000000100000000-0x0000000286365fff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: ASUSTeK COMPUTER INC. Z10PA-D8 Series/Z10PA-D8 Series, BIOS 3202 04/18/2016 [ 0.000000] Hypervisor detected: Xen [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x286366 max_arch_pfn = 0x400000000 [ 0.000000] MTRR: Disabled [ 0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000000] e820: last_pfn = 0x79cfc max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] BRK [0x01d3f000, 0x01d3ffff] PGTABLE [ 0.000000] BRK [0x01d40000, 0x01d40fff] PGTABLE [ 0.000000] BRK [0x01d41000, 0x01d41fff] PGTABLE [ 0.000000] BRK [0x01d42000, 0x01d42fff] PGTABLE [ 0.000000] BRK [0x01d43000, 0x01d43fff] PGTABLE [ 0.000000] BRK [0x01d44000, 0x01d44fff] PGTABLE [ 0.000000] BRK [0x01d45000, 0x01d45fff] PGTABLE [ 0.000000] BRK [0x01d46000, 0x01d46fff] PGTABLE [ 0.000000] BRK [0x01d47000, 0x01d47fff] PGTABLE [ 0.000000] BRK [0x01d48000, 0x01d48fff] PGTABLE [ 0.000000] BRK [0x01d49000, 0x01d49fff] PGTABLE [ 0.000000] BRK [0x01d4a000, 0x01d4afff] PGTABLE [ 0.000000] RAMDISK: [mem 0x02000000-0x0332ffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0580 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x000000007B8EA0B0 0000D4 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x000000007B919410 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x000000007B8EA218 02F1F7 (v02 ALASKA A M I 01072009 INTL 20091013) [ 0.000000] ACPI: FACS 0x000000007BEDEF80 000040 [ 0.000000] ACPI: APIC 0x000000007B919520 000224 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x000000007B919748 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x000000007B919790 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x000000007B919830 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: EINJ 0x000000007B9347D0 000130 (v01 ALASKA A M I 00000001 INTL 00000001) [ 0.000000] ACPI: UEFI 0x000000007B9198C8 000042 (v01 ALASKA A M I 01072009 00000000) [ 0.000000] ACPI: HPET 0x000000007B919910 000038 (v01 ALASKA A M I 00000001 INTL 20091013) [ 0.000000] ACPI: MSCT 0x000000007B919948 000090 (v01 ALASKA A M I 00000001 INTL 20091013) [ 0.000000] ACPI: SLIT 0x000000007B9199D8 000030 (v01 ALASKA A M I 00000001 INTL 20091013) [ 0.000000] ACPI: SRAT 0x000000007B919A08 001158 (v03 ALASKA A M I 00000001 INTL 20091013) [ 0.000000] ACPI: WDDT 0x000000007B91AB60 000040 (v01 ALASKA A M I 00000000 INTL 20091013) [ 0.000000] ACPI: SSDT 0x000000007B91ABA0 016FB3 (v02 ALASKA PmMgt 00000001 INTL 20120913) [ 0.000000] ACPI: NITR 0x000000007B931B58 000071 (v02 ALASKA A M I 00000001 INTL 20091013) [ 0.000000] ACPI: SPMI 0x000000007B931BD0 000041 (v05 ALASKA A M I 00000000 AMI. 00000000) [ 0.000000] ACPI: SSDT 0x000000007B931C18 002652 (v02 ALASKA SpsNm 00000002 INTL 20120913) [ 0.000000] ACPI: SSDT 0x000000007B934270 000064 (v02 ALASKA SpsNvs 00000002 INTL 20120913) [ 0.000000] ACPI: PRAD 0x000000007B9342D8 000102 (v02 ALASKA A M I 00000002 INTL 20120913) [ 0.000000] ACPI: RMAD 0x000000007B9343E0 0000E8 (v01 ALASKA A M I 00000001 INTL 20091013) [ 0.000000] ACPI: HEST 0x000000007B9344C8 0000A8 (v01 ALASKA A M I 00000001 INTL 00000001) [ 0.000000] ACPI: BERT 0x000000007B934570 000030 (v01 ALASKA A M I 00000001 INTL 00000001) [ 0.000000] ACPI: ERST 0x000000007B9345A0 000230 (v01 ALASKA A M I 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Setting APIC routing to Xen PV. [ 0.000000] NUMA turned off [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000286365fff] [ 0.000000] NODE_DATA(0) allocated [mem 0x1ff00e000-0x1ff012fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x0000000286365fff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000079cfbfff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000286365fff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000286365fff] [ 0.000000] On node 0 totalpages: 2097151 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7732 pages used for memmap [ 0.000000] DMA32 zone: 494844 pages, LIFO batch:31 [ 0.000000] Normal zone: 24974 pages used for memmap [ 0.000000] Normal zone: 1598310 pages, LIFO batch:31 [ 0.000000] p2m virtual area at ffffc90000000000, size is 40000000 [ 0.000000] Remapped 549734 page(s) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.000000] IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 32 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x79cfc000-0x7b8c1fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7b8c2000-0x7b934fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7b935000-0x7bedffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7bee0000-0x8fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xc7ffbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xc7ffc000-0xc7ffcfff] [ 0.000000] PM: Registered nosave memory: [mem 0xc7ffd000-0xfbffbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfbffc000-0xfbffcfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfbffd000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec3ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec40000-0xfec40fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec41000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed44fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0x90000000-0xc7ffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.8.0 (preserve-AD) [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:32 nr_node_ids:1 [ 0.000000] percpu: Embedded 35 pages/cpu @ffff880285a00000 s103384 r8192 d31784 u262144 [ 0.000000] pcpu-alloc: s103384 r8192 d31784 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 [ 0.000000] xen: PV spinlocks enabled [ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes) [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2064360 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: placeholder root=UUID=0e49acdd-69d2-4c95-a5fc-3e1f4daa9b65 ro quiet [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 126976 bytes [ 0.000000] log_buf_len min size: 131072 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 117796(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] software IO TLB [mem 0x281a00000-0x285a00000] (64MB) mapped at [ffff880281a00000-ffff8802859fffff] [ 0.000000] Memory: 8117928K/8388604K available (6070K kernel code, 1124K rwdata, 2808K rodata, 1360K init, 800K bss, 270676K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=32. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=32 [ 0.000000] Using NULL legacy PIC [ 0.000000] NR_IRQS:33024 nr_irqs:1496 0 [ 0.000000] xen:events: Using FIFO-based ABI [ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2095.098 MHz processor [ 12.544001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.31 BogoMIPS (lpj=8380632) [ 12.544004] pid_max: default: 32768 minimum: 301 [ 12.544050] ACPI: Core revision 20160422 [ 12.632359] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 12.632779] Security Framework initialized [ 12.632780] Yama: disabled by default; enable with sysctl kernel.yama.* [ 12.632786] AppArmor: AppArmor disabled by boot time parameter [ 12.633974] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 12.636030] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 12.636824] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 12.636844] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 12.637271] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 12.637271] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 12.637274] CPU: Physical Processor ID: 0 [ 12.637275] CPU: Processor Core ID: 0 [ 12.637279] mce: CPU supports 2 MCE banks [ 12.637298] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 12.637299] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 12.637696] Freeing SMP alternatives memory: 24K (ffffffff81c6f000 - ffffffff81c75000) [ 12.639898] ftrace: allocating 24736 entries in 97 pages [ 12.651515] cpu 0 spinlock event irq 73 [ 12.651524] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 12.651549] smpboot: Max logical packages: 4 [ 12.651558] Could not initialize VPMU for cpu 0, error -95 [ 12.651584] Performance Events: Broadwell events, PMU not available due to virtualization, using software events only. [ 12.652649] NMI watchdog: disabled (cpu0): hardware events not enabled [ 12.652649] NMI watchdog: Shutting down hard lockup detector on all cpus [ 12.652775] installing Xen timer for CPU 1 [ 12.652786] cpu 1 spinlock event irq 80 [ 12.653145] installing Xen timer for CPU 2 [ 12.653155] cpu 2 spinlock event irq 87 [ 12.653474] installing Xen timer for CPU 3 [ 12.653484] cpu 3 spinlock event irq 94 [ 12.653810] installing Xen timer for CPU 4 [ 12.653819] cpu 4 spinlock event irq 101 [ 12.654147] installing Xen timer for CPU 5 [ 12.654156] cpu 5 spinlock event irq 108 [ 12.654484] installing Xen timer for CPU 6 [ 12.654493] cpu 6 spinlock event irq 115 [ 12.654808] installing Xen timer for CPU 7 [ 12.654817] cpu 7 spinlock event irq 122 [ 12.655121] installing Xen timer for CPU 8 [ 12.655131] cpu 8 spinlock event irq 129 [ 12.655440] installing Xen timer for CPU 9 [ 12.655463] cpu 9 spinlock event irq 136 [ 12.655763] installing Xen timer for CPU 10 [ 12.655771] cpu 10 spinlock event irq 143 [ 12.656084] installing Xen timer for CPU 11 [ 12.656092] cpu 11 spinlock event irq 150 [ 12.656389] installing Xen timer for CPU 12 [ 12.656398] cpu 12 spinlock event irq 157 [ 12.656709] installing Xen timer for CPU 13 [ 12.656719] cpu 13 spinlock event irq 164 [ 12.657013] installing Xen timer for CPU 14 [ 12.657027] cpu 14 spinlock event irq 171 [ 12.657322] installing Xen timer for CPU 15 [ 12.657335] cpu 15 spinlock event irq 178 [ 12.657613] installing Xen timer for CPU 16 [ 12.657622] cpu 16 spinlock event irq 185 [ 12.657999] installing Xen timer for CPU 17 [ 12.658009] cpu 17 spinlock event irq 192 [ 12.658308] installing Xen timer for CPU 18 [ 12.658319] cpu 18 spinlock event irq 199 [ 12.658629] installing Xen timer for CPU 19 [ 12.658638] cpu 19 spinlock event irq 206 [ 12.658934] installing Xen timer for CPU 20 [ 12.658943] cpu 20 spinlock event irq 213 [ 12.659253] installing Xen timer for CPU 21 [ 12.659263] cpu 21 spinlock event irq 220 [ 12.659561] installing Xen timer for CPU 22 [ 12.659571] cpu 22 spinlock event irq 227 [ 12.659881] installing Xen timer for CPU 23 [ 12.659891] cpu 23 spinlock event irq 234 [ 12.660193] installing Xen timer for CPU 24 [ 12.660203] cpu 24 spinlock event irq 241 [ 12.660516] installing Xen timer for CPU 25 [ 12.660526] cpu 25 spinlock event irq 248 [ 12.660833] installing Xen timer for CPU 26 [ 12.660842] cpu 26 spinlock event irq 255 [ 12.661157] installing Xen timer for CPU 27 [ 12.661167] cpu 27 spinlock event irq 262 [ 12.661467] installing Xen timer for CPU 28 [ 12.661478] cpu 28 spinlock event irq 269 [ 12.661789] installing Xen timer for CPU 29 [ 12.661799] cpu 29 spinlock event irq 276 [ 12.662095] installing Xen timer for CPU 30 [ 12.662110] cpu 30 spinlock event irq 283 [ 12.662422] installing Xen timer for CPU 31 [ 12.662436] cpu 31 spinlock event irq 290 [ 12.662623] x86: Booted up 1 node, 32 CPUs [ 12.663907] devtmpfs: initialized [ 12.663980] x86/mm: Memory block size: 128MB [ 12.667210] PM: Registering ACPI NVS region [mem 0x7b935000-0x7bedffff] (5943296 bytes) [ 12.667580] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 12.667880] pinctrl core: initialized pinctrl subsystem [ 12.668137] NET: Registered protocol family 16 [ 12.668145] xen:grant_table: Grant tables using version 1 layout [ 12.668158] Grant table initialized [ 12.668387] ACPI: bus type PCI registered [ 12.668389] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 12.669062] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 12.669064] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 12.700415] PCI: Using configuration type 1 for base access [ 12.717390] ACPI: Added _OSI(Module Device) [ 12.717391] ACPI: Added _OSI(Processor Device) [ 12.717392] ACPI: Added _OSI(3.0 _SCP Extensions) [ 12.717393] ACPI: Added _OSI(Processor Aggregator Device) [ 12.717555] xen: registering gsi 9 triggering 0 polarity 0 [ 12.736964] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 12.793591] ACPI: Dynamic OEM Table Load: [ 12.793594] ACPI: PRAD 0x0000000000000000 000102 (v02 ALASKA A M I 00000002 INTL 20120913) [ 12.812051] random: fast init done [ 12.842147] ACPI: Interpreter enabled [ 12.842163] ACPI: (supports S0 S4 S5) [ 12.842164] ACPI: Using IOAPIC for interrupt routing [ 12.842233] HEST: Table parsing has been initialized. [ 12.842236] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 12.896013] ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff]) [ 12.896017] acpi PNP0A03:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 12.900764] acpi PNP0A03:02: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 12.900817] PCI host bridge to bus 0000:ff [ 12.900818] pci_bus 0000:ff: root bus resource [bus ff] [ 12.900843] pci 0000:ff:08.0: [8086:6f80] type 00 class 0x088000 [ 12.900988] pci 0000:ff:08.2: [8086:6f32] type 00 class 0x110100 [ 12.901120] pci 0000:ff:08.3: [8086:6f83] type 00 class 0x088000 [ 12.901278] pci 0000:ff:09.0: [8086:6f90] type 00 class 0x088000 [ 12.901402] pci 0000:ff:09.2: [8086:6f33] type 00 class 0x110100 [ 12.901533] pci 0000:ff:09.3: [8086:6f93] type 00 class 0x088000 [ 12.901690] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 12.901810] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 12.901932] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 12.902052] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 12.902180] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 12.902302] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 12.902423] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 12.902544] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 12.902665] pci 0000:ff:0c.4: [8086:6fe4] type 00 class 0x088000 [ 12.902786] pci 0000:ff:0c.5: [8086:6fe5] type 00 class 0x088000 [ 12.902907] pci 0000:ff:0c.6: [8086:6fe6] type 00 class 0x088000 [ 12.903027] pci 0000:ff:0c.7: [8086:6fe7] type 00 class 0x088000 [ 12.903151] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 12.903271] pci 0000:ff:0f.1: [8086:6ff9] type 00 class 0x088000 [ 12.903397] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 12.904453] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 12.904573] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 12.904695] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 12.904814] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 12.904939] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 12.905059] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 12.905179] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 12.905300] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 12.905370] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 12.905509] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 12.905685] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 12.905837] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 12.905989] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 12.906141] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 12.906294] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 12.906440] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 12.906565] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 12.906695] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 12.906851] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 12.907007] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 12.907166] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 12.907315] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 12.907439] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 12.907563] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 12.907687] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 12.907817] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 12.907975] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 12.908131] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 12.908286] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 12.908460] pci 0000:ff:16.0: [8086:6f68] type 00 class 0x088000 [ 12.908620] pci 0000:ff:16.6: [8086:6f6e] type 00 class 0x088000 [ 12.908744] pci 0000:ff:16.7: [8086:6f6f] type 00 class 0x088000 [ 12.908872] pci 0000:ff:17.0: [8086:6fd0] type 00 class 0x088000 [ 12.909031] pci 0000:ff:17.4: [8086:6fb8] type 00 class 0x088000 [ 12.909156] pci 0000:ff:17.5: [8086:6fb9] type 00 class 0x088000 [ 12.909280] pci 0000:ff:17.6: [8086:6fba] type 00 class 0x088000 [ 12.909402] pci 0000:ff:17.7: [8086:6fbb] type 00 class 0x088000 [ 12.909542] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 12.909666] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 12.909789] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 12.909914] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 12.909981] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 12.910115] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 12.910241] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 12.910436] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f]) [ 12.910440] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 12.912544] acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 12.912597] PCI host bridge to bus 0000:7f [ 12.912598] pci_bus 0000:7f: root bus resource [bus 7f] [ 12.912620] pci 0000:7f:08.0: [8086:6f80] type 00 class 0x088000 [ 12.912752] pci 0000:7f:08.2: [8086:6f32] type 00 class 0x110100 [ 12.912882] pci 0000:7f:08.3: [8086:6f83] type 00 class 0x088000 [ 12.913034] pci 0000:7f:09.0: [8086:6f90] type 00 class 0x088000 [ 12.913158] pci 0000:7f:09.2: [8086:6f33] type 00 class 0x110100 [ 12.913287] pci 0000:7f:09.3: [8086:6f93] type 00 class 0x088000 [ 12.913440] pci 0000:7f:0b.0: [8086:6f81] type 00 class 0x088000 [ 12.913557] pci 0000:7f:0b.1: [8086:6f36] type 00 class 0x110100 [ 12.913674] pci 0000:7f:0b.2: [8086:6f37] type 00 class 0x110100 [ 12.913790] pci 0000:7f:0b.3: [8086:6f76] type 00 class 0x088000 [ 12.913912] pci 0000:7f:0c.0: [8086:6fe0] type 00 class 0x088000 [ 12.914028] pci 0000:7f:0c.1: [8086:6fe1] type 00 class 0x088000 [ 12.914143] pci 0000:7f:0c.2: [8086:6fe2] type 00 class 0x088000 [ 12.914258] pci 0000:7f:0c.3: [8086:6fe3] type 00 class 0x088000 [ 12.914374] pci 0000:7f:0c.4: [8086:6fe4] type 00 class 0x088000 [ 12.914493] pci 0000:7f:0c.5: [8086:6fe5] type 00 class 0x088000 [ 12.914611] pci 0000:7f:0c.6: [8086:6fe6] type 00 class 0x088000 [ 12.914730] pci 0000:7f:0c.7: [8086:6fe7] type 00 class 0x088000 [ 12.914851] pci 0000:7f:0f.0: [8086:6ff8] type 00 class 0x088000 [ 12.914969] pci 0000:7f:0f.1: [8086:6ff9] type 00 class 0x088000 [ 12.915094] pci 0000:7f:0f.4: [8086:6ffc] type 00 class 0x088000 [ 12.915213] pci 0000:7f:0f.5: [8086:6ffd] type 00 class 0x088000 [ 12.915333] pci 0000:7f:0f.6: [8086:6ffe] type 00 class 0x088000 [ 12.915453] pci 0000:7f:10.0: [8086:6f1d] type 00 class 0x088000 [ 12.915573] pci 0000:7f:10.1: [8086:6f34] type 00 class 0x110100 [ 12.915697] pci 0000:7f:10.5: [8086:6f1e] type 00 class 0x088000 [ 12.915817] pci 0000:7f:10.6: [8086:6f7d] type 00 class 0x110100 [ 12.915935] pci 0000:7f:10.7: [8086:6f1f] type 00 class 0x088000 [ 12.916055] pci 0000:7f:12.0: [8086:6fa0] type 00 class 0x088000 [ 12.916126] pci 0000:7f:12.1: [8086:6f30] type 00 class 0x110100 [ 12.916265] pci 0000:7f:13.0: [8086:6fa8] type 00 class 0x088000 [ 12.916435] pci 0000:7f:13.1: [8086:6f71] type 00 class 0x088000 [ 12.916587] pci 0000:7f:13.2: [8086:6faa] type 00 class 0x088000 [ 12.916738] pci 0000:7f:13.3: [8086:6fab] type 00 class 0x088000 [ 12.916888] pci 0000:7f:13.4: [8086:6fac] type 00 class 0x088000 [ 12.917041] pci 0000:7f:13.5: [8086:6fad] type 00 class 0x088000 [ 12.917188] pci 0000:7f:13.6: [8086:6fae] type 00 class 0x088000 [ 12.917309] pci 0000:7f:13.7: [8086:6faf] type 00 class 0x088000 [ 12.917435] pci 0000:7f:14.0: [8086:6fb0] type 00 class 0x088000 [ 12.917586] pci 0000:7f:14.1: [8086:6fb1] type 00 class 0x088000 [ 12.917735] pci 0000:7f:14.2: [8086:6fb2] type 00 class 0x088000 [ 12.917885] pci 0000:7f:14.3: [8086:6fb3] type 00 class 0x088000 [ 12.918032] pci 0000:7f:14.4: [8086:6fbc] type 00 class 0x088000 [ 12.918151] pci 0000:7f:14.5: [8086:6fbd] type 00 class 0x088000 [ 12.918270] pci 0000:7f:14.6: [8086:6fbe] type 00 class 0x088000 [ 12.918390] pci 0000:7f:14.7: [8086:6fbf] type 00 class 0x088000 [ 12.918516] pci 0000:7f:15.0: [8086:6fb4] type 00 class 0x088000 [ 12.918669] pci 0000:7f:15.1: [8086:6fb5] type 00 class 0x088000 [ 12.918823] pci 0000:7f:15.2: [8086:6fb6] type 00 class 0x088000 [ 12.918976] pci 0000:7f:15.3: [8086:6fb7] type 00 class 0x088000 [ 12.919134] pci 0000:7f:16.0: [8086:6f68] type 00 class 0x088000 [ 12.919294] pci 0000:7f:16.6: [8086:6f6e] type 00 class 0x088000 [ 12.919420] pci 0000:7f:16.7: [8086:6f6f] type 00 class 0x088000 [ 12.919544] pci 0000:7f:17.0: [8086:6fd0] type 00 class 0x088000 [ 12.919699] pci 0000:7f:17.4: [8086:6fb8] type 00 class 0x088000 [ 12.919820] pci 0000:7f:17.5: [8086:6fb9] type 00 class 0x088000 [ 12.919943] pci 0000:7f:17.6: [8086:6fba] type 00 class 0x088000 [ 12.920069] pci 0000:7f:17.7: [8086:6fbb] type 00 class 0x088000 [ 12.920207] pci 0000:7f:1e.0: [8086:6f98] type 00 class 0x088000 [ 12.920332] pci 0000:7f:1e.1: [8086:6f99] type 00 class 0x088000 [ 12.920463] pci 0000:7f:1e.2: [8086:6f9a] type 00 class 0x088000 [ 12.920583] pci 0000:7f:1e.3: [8086:6fc0] type 00 class 0x088000 [ 12.920650] pci 0000:7f:1e.4: [8086:6f9c] type 00 class 0x088000 [ 12.920778] pci 0000:7f:1f.0: [8086:6f88] type 00 class 0x088000 [ 12.920906] pci 0000:7f:1f.2: [8086:6f8a] type 00 class 0x088000 [ 12.934794] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 12.934797] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 12.936940] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 12.937413] PCI host bridge to bus 0000:00 [ 12.937415] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 12.937417] pci_bus 0000:00: root bus resource [io 0x1000-0xbfff window] [ 12.937419] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 12.937420] pci_bus 0000:00: root bus resource [mem 0x90000000-0xc7ffbfff window] [ 12.937422] pci_bus 0000:00: root bus resource [bus 00-7e] [ 12.937439] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 12.937683] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 12.937808] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 12.937899] pci 0000:00:01.0: System wakeup disabled by ACPI [ 12.937962] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 12.938086] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 12.938174] pci 0000:00:02.0: System wakeup disabled by ACPI [ 12.938235] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 12.938358] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 12.938445] pci 0000:00:03.0: System wakeup disabled by ACPI [ 12.938503] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 12.938718] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 12.938957] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 12.939170] pci 0000:00:05.4: [8086:6f2c] type 00 class 0x080020 [ 12.939188] pci 0000:00:05.4: reg 0x10: [mem 0xc7f19000-0xc7f19fff] [ 12.939452] pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000 [ 12.939801] pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601 [ 12.939844] pci 0000:00:11.4: reg 0x10: [io 0xb110-0xb117] [ 12.939861] pci 0000:00:11.4: reg 0x14: [io 0xb100-0xb103] [ 12.939877] pci 0000:00:11.4: reg 0x18: [io 0xb0f0-0xb0f7] [ 12.939894] pci 0000:00:11.4: reg 0x1c: [io 0xb0e0-0xb0e3] [ 12.939910] pci 0000:00:11.4: reg 0x20: [io 0xb020-0xb03f] [ 12.939926] pci 0000:00:11.4: reg 0x24: [mem 0xc7f18000-0xc7f187ff] [ 12.940017] pci 0000:00:11.4: PME# supported from D3hot [ 12.940184] pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330 [ 12.940221] pci 0000:00:14.0: reg 0x10: [mem 0xc7f00000-0xc7f0ffff 64bit] [ 12.940364] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 12.940484] pci 0000:00:14.0: System wakeup disabled by ACPI [ 12.940562] pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000 [ 12.940599] pci 0000:00:16.0: reg 0x10: [mem 0xc7f17000-0xc7f1700f 64bit] [ 12.940745] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 12.940895] pci 0000:00:16.1: [8086:8d3b] type 00 class 0x078000 [ 12.940932] pci 0000:00:16.1: reg 0x10: [mem 0xc7f16000-0xc7f1600f 64bit] [ 12.941076] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 12.941251] pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320 [ 12.941293] pci 0000:00:1a.0: reg 0x10: [mem 0xc7f14000-0xc7f143ff] [ 12.941471] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 12.941579] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 12.941659] pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400 [ 12.941819] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 12.941882] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 12.941887] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 12.941950] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 12.942034] pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400 [ 12.942193] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 12.942241] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 12.942245] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 12.942310] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 12.942389] pci 0000:00:1c.5: [8086:8d1a] type 01 class 0x060400 [ 12.942546] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 12.942586] pci 0000:00:1c.5: Enabling MPC IRBNCE [ 12.942591] pci 0000:00:1c.5: Intel PCH root port ACS workaround enabled [ 12.942653] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 12.942736] pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320 [ 12.942770] pci 0000:00:1d.0: reg 0x10: [mem 0xc7f13000-0xc7f133ff] [ 12.942955] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 12.943062] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 12.943144] pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100 [ 12.943486] pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601 [ 12.943527] pci 0000:00:1f.2: reg 0x10: [io 0xb070-0xb077] [ 12.943551] pci 0000:00:1f.2: reg 0x14: [io 0xb060-0xb063] [ 12.943567] pci 0000:00:1f.2: reg 0x18: [io 0xb050-0xb057] [ 12.943582] pci 0000:00:1f.2: reg 0x1c: [io 0xb040-0xb043] [ 12.943597] pci 0000:00:1f.2: reg 0x20: [io 0xb000-0xb01f] [ 12.943614] pci 0000:00:1f.2: reg 0x24: [mem 0xc7f12000-0xc7f127ff] [ 12.943705] pci 0000:00:1f.2: PME# supported from D3hot [ 12.943852] pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500 [ 12.943882] pci 0000:00:1f.3: reg 0x10: [mem 0xc7f11000-0xc7f110ff 64bit] [ 12.943928] pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f] [ 12.944374] pci 0000:00:01.0: PCI bridge to [bus 01] [ 12.944681] pci 0000:02:00.0: [1002:67ef] type 00 class 0x030000 [ 12.944713] pci 0000:02:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref] [ 12.944738] pci 0000:02:00.0: reg 0x18: [mem 0xc0000000-0xc01fffff 64bit pref] [ 12.944753] pci 0000:02:00.0: reg 0x20: [io 0xa000-0xa0ff] [ 12.944767] pci 0000:02:00.0: reg 0x24: [mem 0xc7e00000-0xc7e3ffff] [ 12.944784] pci 0000:02:00.0: reg 0x30: [mem 0xc7e40000-0xc7e5ffff pref] [ 12.944894] pci 0000:02:00.0: supports D1 D2 [ 12.944895] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 12.945042] pci 0000:02:00.1: [1002:aae0] type 00 class 0x040300 [ 12.945071] pci 0000:02:00.1: reg 0x10: [mem 0xc7e60000-0xc7e63fff 64bit] [ 12.945238] pci 0000:02:00.1: supports D1 D2 [ 12.945359] pci 0000:00:02.0: PCI bridge to [bus 02] [ 12.945364] pci 0000:00:02.0: bridge window [io 0xa000-0xafff] [ 12.945369] pci 0000:00:02.0: bridge window [mem 0xc7e00000-0xc7efffff] [ 12.945377] pci 0000:00:02.0: bridge window [mem 0xb0000000-0xc01fffff 64bit pref] [ 12.945635] pci 0000:00:03.0: PCI bridge to [bus 03] [ 12.945749] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 12.945914] pci 0000:05:00.0: [8086:1533] type 00 class 0x020000 [ 12.945952] pci 0000:05:00.0: reg 0x10: [mem 0xc7d00000-0xc7d7ffff] [ 12.946022] pci 0000:05:00.0: reg 0x18: [io 0x9000-0x901f] [ 12.946057] pci 0000:05:00.0: reg 0x1c: [mem 0xc7d80000-0xc7d83fff] [ 12.946309] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 12.960700] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 12.960716] pci 0000:00:1c.4: bridge window [io 0x9000-0x9fff] [ 12.960721] pci 0000:00:1c.4: bridge window [mem 0xc7d00000-0xc7dfffff] [ 12.960898] pci 0000:06:00.0: [8086:1533] type 00 class 0x020000 [ 12.960937] pci 0000:06:00.0: reg 0x10: [mem 0xc7c00000-0xc7c7ffff] [ 12.960984] pci 0000:06:00.0: reg 0x18: [io 0x8000-0x801f] [ 12.961008] pci 0000:06:00.0: reg 0x1c: [mem 0xc7c80000-0xc7c83fff] [ 12.961262] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 12.976945] pci 0000:00:1c.5: PCI bridge to [bus 06] [ 12.976960] pci 0000:00:1c.5: bridge window [io 0x8000-0x8fff] [ 12.976966] pci 0000:00:1c.5: bridge window [mem 0xc7c00000-0xc7cfffff] [ 12.977062] pci_bus 0000:00: on NUMA node 0 [ 12.977148] xen: registering gsi 13 triggering 1 polarity 0 [ 12.978436] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe]) [ 12.978440] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 12.978813] acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 12.979038] PCI host bridge to bus 0000:80 [ 12.979040] pci_bus 0000:80: root bus resource [io 0xc000-0xffff window] [ 12.979041] pci_bus 0000:80: root bus resource [mem 0xc8000000-0xfbffbfff window] [ 12.979043] pci_bus 0000:80: root bus resource [bus 80-fe] [ 12.979069] pci 0000:80:05.0: [8086:6f28] type 00 class 0x088000 [ 12.979286] pci 0000:80:05.1: [8086:6f29] type 00 class 0x088000 [ 12.979524] pci 0000:80:05.2: [8086:6f2a] type 00 class 0x088000 [ 12.979727] pci 0000:80:05.4: [8086:6f2c] type 00 class 0x080020 [ 12.979745] pci 0000:80:05.4: reg 0x10: [mem 0xfbf00000-0xfbf00fff] [ 12.980006] pci_bus 0000:80: on NUMA node 1 [ 12.980398] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 12 14 15) [ 12.980506] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 *7 9 12 14 15) [ 12.980613] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *10 12 14 15) [ 12.980718] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 *11 12 14 15) [ 12.980814] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 12.980937] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 12.981045] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 12.981149] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 12.981357] ACPI: Enabled 1 GPEs in block 00 to 3F [ 12.981609] xen:balloon: Initialising balloon driver [ 12.981702] xen_balloon: Initialising balloon driver [ 12.981887] vgaarb: setting as boot device: PCI:0000:02:00.0 [ 12.981888] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 12.981890] vgaarb: loaded [ 12.981891] vgaarb: bridge control possible 0000:02:00.0 [ 12.982111] PCI: Using ACPI for IRQ routing [ 12.996012] PCI: pci_cache_line_size set to 64 bytes [ 12.996605] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 12.996606] e820: reserve RAM buffer [mem 0x79cfc000-0x7bffffff] [ 12.996607] e820: reserve RAM buffer [mem 0x286366000-0x287ffffff] [ 12.997048] clocksource: Switched to clocksource xen [ 13.005876] VFS: Disk quotas dquot_6.6.0 [ 13.006008] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 13.006033] hugetlbfs: disabling because there are no supported hugepage sizes [ 13.006069] pnp: PnP ACPI init [ 13.006494] xen: registering gsi 8 triggering 1 polarity 0 [ 13.006542] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 13.006670] system 00:01: [io 0x0500-0x057f] has been reserved [ 13.006672] system 00:01: [io 0x0400-0x047f] has been reserved [ 13.006674] system 00:01: [io 0x0580-0x059f] has been reserved [ 13.006675] system 00:01: [io 0x0600-0x061f] has been reserved [ 13.006676] system 00:01: [io 0x0880-0x0883] has been reserved [ 13.006678] system 00:01: [io 0x0800-0x081f] has been reserved [ 13.006680] system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved [ 13.006682] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 13.006683] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 13.006684] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 13.006686] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 13.006687] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 13.006688] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 13.006691] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 13.006935] system 00:02: [io 0x0290-0x029f] has been reserved [ 13.006936] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 13.007346] xen: registering gsi 4 triggering 1 polarity 0 [ 13.007372] pnp 00:03: [dma 0 disabled] [ 13.007417] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 13.007799] xen: registering gsi 3 triggering 1 polarity 0 [ 13.007816] pnp 00:04: [dma 0 disabled] [ 13.007859] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 13.008760] pnp: PnP ACPI: found 5 devices [ 13.017876] PM-Timer failed consistency check (0xffffff) - aborting. [ 13.017962] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 13.017965] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 13.017967] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000 [ 13.018007] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 13.018009] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 13.018010] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 13.018012] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 13.018013] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 13.018015] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 13.018018] pci 0000:00:1c.0: BAR 14: assigned [mem 0x90000000-0x901fffff] [ 13.018022] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90200000-0x903fffff 64bit pref] [ 13.018024] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 13.018026] pci 0000:00:01.0: PCI bridge to [bus 01] [ 13.018043] pci 0000:00:02.0: PCI bridge to [bus 02] [ 13.018046] pci 0000:00:02.0: bridge window [io 0xa000-0xafff] [ 13.018052] pci 0000:00:02.0: bridge window [mem 0xc7e00000-0xc7efffff] [ 13.018056] pci 0000:00:02.0: bridge window [mem 0xb0000000-0xc01fffff 64bit pref] [ 13.018064] pci 0000:00:03.0: PCI bridge to [bus 03] [ 13.018081] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 13.018091] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 13.018099] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x901fffff] [ 13.018104] pci 0000:00:1c.0: bridge window [mem 0x90200000-0x903fffff 64bit pref] [ 13.018114] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 13.018117] pci 0000:00:1c.4: bridge window [io 0x9000-0x9fff] [ 13.018124] pci 0000:00:1c.4: bridge window [mem 0xc7d00000-0xc7dfffff] [ 13.018138] pci 0000:00:1c.5: PCI bridge to [bus 06] [ 13.018141] pci 0000:00:1c.5: bridge window [io 0x8000-0x8fff] [ 13.018148] pci 0000:00:1c.5: bridge window [mem 0xc7c00000-0xc7cfffff] [ 13.018163] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 13.018164] pci_bus 0000:00: resource 5 [io 0x1000-0xbfff window] [ 13.018165] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 13.018166] pci_bus 0000:00: resource 7 [mem 0x90000000-0xc7ffbfff window] [ 13.018168] pci_bus 0000:02: resource 0 [io 0xa000-0xafff] [ 13.018168] pci_bus 0000:02: resource 1 [mem 0xc7e00000-0xc7efffff] [ 13.018170] pci_bus 0000:02: resource 2 [mem 0xb0000000-0xc01fffff 64bit pref] [ 13.018171] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [ 13.018172] pci_bus 0000:04: resource 1 [mem 0x90000000-0x901fffff] [ 13.018173] pci_bus 0000:04: resource 2 [mem 0x90200000-0x903fffff 64bit pref] [ 13.018174] pci_bus 0000:05: resource 0 [io 0x9000-0x9fff] [ 13.018175] pci_bus 0000:05: resource 1 [mem 0xc7d00000-0xc7dfffff] [ 13.018176] pci_bus 0000:06: resource 0 [io 0x8000-0x8fff] [ 13.018177] pci_bus 0000:06: resource 1 [mem 0xc7c00000-0xc7cfffff] [ 13.018180] pci_bus 0000:80: resource 4 [io 0xc000-0xffff window] [ 13.018181] pci_bus 0000:80: resource 5 [mem 0xc8000000-0xfbffbfff window] [ 13.018548] NET: Registered protocol family 2 [ 13.019125] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 13.019391] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 13.019571] TCP: Hash tables configured (established 65536 bind 65536) [ 13.019634] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 13.019676] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 13.019835] NET: Registered protocol family 1 [ 13.020266] xen: registering gsi 19 triggering 0 polarity 1 [ 13.020291] xen: --> pirq=19 -> irq=19 (gsi=19) [ 13.020580] xen: registering gsi 19 triggering 0 polarity 1 [ 13.020585] Already setup the GSI :19 [ 13.045232] xen: registering gsi 18 triggering 0 polarity 1 [ 13.045244] xen: --> pirq=18 -> irq=18 (gsi=18) [ 13.069317] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 13.069321] PCI: CLS mismatch (64 != 32), using 64 bytes [ 13.069380] Unpacking initramfs... [ 13.462278] Freeing initrd memory: 19648K (ffff880002000000 - ffff880003330000) [ 13.462342] Intel CQM monitoring enabled [ 13.462343] Intel MBM enabled [ 13.464654] futex hash table entries: 8192 (order: 7, 524288 bytes) [ 13.464836] audit: initializing netlink subsys (disabled) [ 13.464859] audit: type=2000 audit(1485059010.012:1): initialized [ 13.465180] Initialise system trusted keyrings [ 13.465530] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 13.465542] zbud: loaded [ 13.508193] Key type asymmetric registered [ 13.508195] Asymmetric key parser 'x509' registered [ 13.508287] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 13.508431] io scheduler noop registered [ 13.508432] io scheduler deadline registered [ 13.508438] io scheduler cfq registered (default) [ 13.508776] xen: registering gsi 26 triggering 0 polarity 1 [ 13.508801] xen: --> pirq=26 -> irq=26 (gsi=26) [ 13.509107] xen: registering gsi 32 triggering 0 polarity 1 [ 13.509120] xen: --> pirq=32 -> irq=32 (gsi=32) [ 13.509366] xen: registering gsi 40 triggering 0 polarity 1 [ 13.509376] xen: --> pirq=40 -> irq=40 (gsi=40) [ 13.509626] xen: registering gsi 16 triggering 0 polarity 1 [ 13.509636] xen: --> pirq=16 -> irq=16 (gsi=16) [ 13.509940] xen: registering gsi 16 triggering 0 polarity 1 [ 13.509944] Already setup the GSI :16 [ 13.510216] xen: registering gsi 17 triggering 0 polarity 1 [ 13.510226] xen: --> pirq=17 -> irq=17 (gsi=17) [ 13.510500] aer 0000:00:01.0:pcie002: service driver aer loaded [ 13.510544] aer 0000:00:02.0:pcie002: service driver aer loaded [ 13.510586] aer 0000:00:03.0:pcie002: service driver aer loaded [ 13.510606] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 13.510611] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 13.510625] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 13.510627] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 13.510628] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt [ 13.510634] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 13.510650] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt [ 13.510656] pcie_pme 0000:00:03.0:pcie001: service driver pcie_pme loaded [ 13.510696] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 13.510711] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded [ 13.510749] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 13.510750] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt [ 13.510764] pcie_pme 0000:00:1c.4:pcie001: service driver pcie_pme loaded [ 13.510803] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 13.510804] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt [ 13.510819] pcie_pme 0000:00:1c.5:pcie001: service driver pcie_pme loaded [ 13.510830] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 13.510853] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 13.510973] pciehp 0000:00:1c.0:pcie004: service driver pciehp loaded [ 13.510978] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 13.510992] intel_idle: MWAIT substates: 0x2120 [ 13.510993] intel_idle: v0.4.1 model 0x4F [ 13.511006] intel_idle: intel_idle yielding to none [ 13.511098] Monitor-Mwait will be used to enter C-1 state [ 13.511119] Monitor-Mwait will be used to enter C-2 state [ 13.523587] Warning: Processor Platform Limit not supported. [ 13.523797] ERST: Error Record Serialization Table (ERST) support is initialized. [ 13.523799] pstore: using zlib compression [ 13.523802] pstore: Registered erst as persistent store backend [ 13.524183] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 13.524732] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 13.545554] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 13.566423] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 13.566886] hpet_acpi_add: no address or irqs in _CRS [ 13.566929] Linux agpgart interface v0.103 [ 13.567108] AMD IOMMUv2 driver by Joerg Roedel <jroedel@xxxxxxx> [ 13.567109] AMD IOMMUv2 functionality not available on this system [ 13.570358] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 13.573188] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 13.573193] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 13.573380] mousedev: PS/2 mouse device common for all mice [ 13.573455] rtc_cmos 00:00: RTC can wake from S4 [ 13.573684] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 13.573757] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 13.574809] ledtrig-cpu: registered to indicate activity on CPUs [ 13.576164] NET: Registered protocol family 10 [ 13.576672] mip6: Mobile IPv6 [ 13.576674] NET: Registered protocol family 17 [ 13.576676] mpls_gso: MPLS GSO support [ 13.577537] mce: Unable to init device /dev/mcelog (rc: -16) [ 13.577631] microcode: sig=0x406f1, pf=0x1, revision=0xb000017 [ 13.578205] microcode: Microcode Update Driver: v2.01 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba [ 13.578347] registered taskstats version 1 [ 13.578349] Loading compiled-in X.509 certificates [ 13.581820] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256)) [ 13.582106] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630' [ 13.582161] zswap: loaded using pool lzo/zbud [ 13.584201] rtc_cmos 00:00: setting system clock to 2017-01-22 04:23:30 UTC (1485059010) [ 13.584249] PM: Hibernation image not present or could not be loaded. [ 13.584925] Freeing unused kernel memory: 1360K (ffffffff81b1b000 - ffffffff81c6f000) [ 13.584926] Write protecting the kernel read-only data: 10240k [ 13.587636] Freeing unused kernel memory: 60K (ffff8800015f1000 - ffff880001600000) [ 13.588376] Freeing unused kernel memory: 1288K (ffff8800018be000 - ffff880001a00000) [ 13.588381] ------------[ cut here ]------------ [ 13.588386] WARNING: CPU: 18 PID: 1 at /build/linux-zDY19G/linux-4.8.15/arch/x86/mm/dump_pagetables.c:225 note_page+0x5e8/0x790 [ 13.588388] x86/mm: Found insecure W+X mapping at address ffff880000000000/0xffff880000000000 [ 13.588388] Modules linked in: [ 13.588392] CPU: 18 PID: 1 Comm: swapper/0 Not tainted 4.8.0-2-amd64 #1 Debian 4.8.15-2 [ 13.588392] Hardware name: ASUSTeK COMPUTER INC. Z10PA-D8 Series/Z10PA-D8 Series, BIOS 3202 04/18/2016 [ 13.588394] 0000000000000200 00000000043f1514 ffffffff8131f925 ffff8802806b3de0 [ 13.588397] 0000000000000000 ffffffff81074ffe ffff8802806b3ed0 ffff8802806b3e38 [ 13.588399] 0000000000000004 0000000000000000 ffff8802806b3ed0 0000000000000000 [ 13.588401] Call Trace: [ 13.588406] [<ffffffff8131f925>] ? dump_stack+0x5c/0x77 [ 13.588409] [<ffffffff81074ffe>] ? __warn+0xbe/0xe0 [ 13.588412] [<ffffffff8107507f>] ? warn_slowpath_fmt+0x5f/0x80 [ 13.588415] [<ffffffff810cadc9>] ? vprintk_emit+0x349/0x530 [ 13.588417] [<ffffffff81067198>] ? note_page+0x5e8/0x790 [ 13.588419] [<ffffffff81067615>] ? ptdump_walk_pgd_level_core+0x2d5/0x400 [ 13.588423] [<ffffffff815dbd46>] ? kernel_init+0x26/0x100 [ 13.588425] [<ffffffff815e8eef>] ? ret_from_fork+0x1f/0x40 [ 13.588427] [<ffffffff815dbd20>] ? rest_init+0x80/0x80 [ 13.588428] ---[ end trace 98efce8be234f5b3 ]--- [ 13.608867] x86/mm: Checked W+X mappings: FAILED, 4602 W+X pages found. [ 13.753840] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED [ 13.764331] random: crng init done [ 13.780980] pps_core: LinuxPPS API ver. 1 registered [ 13.780981] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx> [ 13.781929] xen: registering gsi 18 triggering 0 polarity 1 [ 13.781944] Already setup the GSI :18 [ 13.782087] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 13.782348] PTP clock support registered [ 13.783466] dca service started, version 1.12.1 [ 13.785324] SCSI subsystem initialized [ 13.786673] ACPI: bus type USB registered [ 13.786696] usbcore: registered new interface driver usbfs [ 13.786705] usbcore: registered new interface driver hub [ 13.786882] usbcore: registered new device driver usb [ 13.789762] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 13.789928] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 13.789929] igb: Copyright (c) 2007-2014 Intel Corporation. [ 13.790104] xen: registering gsi 16 triggering 0 polarity 1 [ 13.790125] Already setup the GSI :16 [ 13.791256] igb 0000:05:00.0: PHY reset is blocked due to SOL/IDER session. [ 13.791743] ehci-pci: EHCI PCI platform driver [ 13.791869] xen: registering gsi 19 triggering 0 polarity 1 [ 13.791876] Already setup the GSI :19 [ 13.791984] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 13.791990] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 13.792015] ehci-pci 0000:00:1a.0: debug port 2 [ 13.792033] libata version 3.00 loaded. [ 13.796009] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 13.796079] ehci-pci 0000:00:1a.0: irq 19, io mem 0xc7f14000 [ 13.808747] AVX2 version of gcm_enc/dec engaged. [ 13.808748] AES CTR mode by8 optimization enabled [ 13.809086] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 13.809320] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 13.809322] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.809326] usb usb1: Product: EHCI Host Controller [ 13.809328] usb usb1: Manufacturer: Linux 4.8.0-2-amd64 ehci_hcd [ 13.809329] usb usb1: SerialNumber: 0000:00:1a.0 [ 13.809551] hub 1-0:1.0: USB hub found [ 13.809569] hub 1-0:1.0: 2 ports detected [ 13.809974] xen: registering gsi 18 triggering 0 polarity 1 [ 13.809983] Already setup the GSI :18 [ 13.810061] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 13.810066] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 13.810092] ehci-pci 0000:00:1d.0: debug port 2 [ 13.814028] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 13.814034] ehci-pci 0000:00:1d.0: irq 18, io mem 0xc7f13000 [ 13.815507] pps pps0: new PPS source ptp0 [ 13.815509] igb 0000:05:00.0: added PHC on eth0 [ 13.815510] igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection [ 13.815512] igb 0000:05:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 34:97:f6:5c:0a:1f [ 13.815578] igb 0000:05:00.0: eth0: PBA No: 001300-000 [ 13.815579] igb 0000:05:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 13.815694] xen: registering gsi 17 triggering 0 polarity 1 [ 13.815711] Already setup the GSI :17 [ 13.833115] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 13.833378] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 13.833381] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.833383] usb usb2: Product: EHCI Host Controller [ 13.833385] usb usb2: Manufacturer: Linux 4.8.0-2-amd64 ehci_hcd [ 13.833386] usb usb2: SerialNumber: 0000:00:1d.0 [ 13.833603] hub 2-0:1.0: USB hub found [ 13.833648] hub 2-0:1.0: 2 ports detected [ 13.834211] xen: registering gsi 19 triggering 0 polarity 1 [ 13.834223] Already setup the GSI :19 [ 13.834292] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 13.834299] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 13.835409] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 13.835429] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 13.835849] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 13.835851] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.835852] usb usb3: Product: xHCI Host Controller [ 13.835853] usb usb3: Manufacturer: Linux 4.8.0-2-amd64 xhci-hcd [ 13.835854] usb usb3: SerialNumber: 0000:00:14.0 [ 13.836071] hub 3-0:1.0: USB hub found [ 13.836131] hub 3-0:1.0: 15 ports detected [ 13.839224] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 13.839230] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 13.839285] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 13.839286] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.839287] usb usb4: Product: xHCI Host Controller [ 13.839288] usb usb4: Manufacturer: Linux 4.8.0-2-amd64 xhci-hcd [ 13.839290] usb usb4: SerialNumber: 0000:00:14.0 [ 13.839450] hub 4-0:1.0: USB hub found [ 13.839477] hub 4-0:1.0: 6 ports detected [ 13.840988] ahci 0000:00:11.4: version 3.0 [ 13.841126] xen: registering gsi 16 triggering 0 polarity 1 [ 13.841132] Already setup the GSI :16 [ 13.841358] ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 13.841363] ahci 0000:00:11.4: flags: 64bit ncq pm led clo pio slum part ems apst [ 13.845688] pps pps1: new PPS source ptp1 [ 13.845690] igb 0000:06:00.0: added PHC on eth1 [ 13.845691] igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection [ 13.845693] igb 0000:06:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 34:97:f6:5c:0a:20 [ 13.845752] igb 0000:06:00.0: eth1: PBA No: 001300-000 [ 13.845754] igb 0000:06:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 13.846877] igb 0000:06:00.0 eth2: renamed from eth1 [ 13.881503] igb 0000:05:00.0 eth1: renamed from eth0 [ 13.881752] scsi host0: ahci [ 13.881905] scsi host1: ahci [ 13.882025] scsi host2: ahci [ 13.882125] scsi host3: ahci [ 13.882186] ata1: SATA max UDMA/133 abar m2048@0xc7f18000 port 0xc7f18100 irq 317 [ 13.882188] ata2: SATA max UDMA/133 abar m2048@0xc7f18000 port 0xc7f18180 irq 317 [ 13.882189] ata3: SATA max UDMA/133 abar m2048@0xc7f18000 port 0xc7f18200 irq 317 [ 13.882191] ata4: SATA max UDMA/133 abar m2048@0xc7f18000 port 0xc7f18280 irq 317 [ 13.882300] xen: registering gsi 19 triggering 0 polarity 1 [ 13.882306] Already setup the GSI :19 [ 13.882504] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 13.882506] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 13.941810] scsi host4: ahci [ 13.941968] scsi host5: ahci [ 13.942077] scsi host6: ahci [ 13.942183] scsi host7: ahci [ 13.942331] scsi host8: ahci [ 13.942446] scsi host9: ahci [ 13.942502] ata5: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12100 irq 318 [ 13.942503] ata6: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12180 irq 318 [ 13.942505] ata7: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12200 irq 318 [ 13.942506] ata8: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12280 irq 318 [ 13.942507] ata9: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12300 irq 318 [ 13.942509] ata10: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12380 irq 318 [ 14.137132] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 14.161124] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 14.165103] usb 3-4: new full-speed USB device number 2 using xhci_hcd [ 14.196691] ata3: SATA link down (SStatus 0 SControl 300) [ 14.196720] ata4: SATA link down (SStatus 0 SControl 300) [ 14.196760] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 14.196810] ata2: SATA link down (SStatus 0 SControl 300) [ 14.200245] ata1.00: ATA-6: WDC WD740GD-00FLC0, 33.08F33, max UDMA/133 [ 14.200247] ata1.00: 145226112 sectors, multi 16: LBA48 [ 14.204763] ata1.00: configured for UDMA/133 [ 14.205180] scsi 0:0:0:0: Direct-Access ATA WDC WD740GD-00FL 8F33 PQ: 0 ANSI: 5 [ 14.256544] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 14.256560] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 14.256575] ata10: SATA link down (SStatus 0 SControl 300) [ 14.256591] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 14.256607] ata9: SATA link down (SStatus 0 SControl 300) [ 14.256624] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 14.257237] ata5.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 14.257239] ata5.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 14.257269] ata7.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 14.257270] ata7.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 14.257277] ata6.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 14.257279] ata6.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 14.257286] ata8.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 14.257287] ata8.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 14.257871] ata5.00: configured for UDMA/133 [ 14.257883] ata6.00: configured for UDMA/133 [ 14.257914] ata7.00: configured for UDMA/133 [ 14.257921] ata8.00: configured for UDMA/133 [ 14.258415] scsi 4:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 14.285558] usb 1-1: New USB device found, idVendor=8087, idProduct=800a [ 14.285561] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 14.286273] hub 1-1:1.0: USB hub found [ 14.286540] hub 1-1:1.0: 6 ports detected [ 14.301728] scsi 5:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 14.307683] usb 3-4: New USB device found, idVendor=046d, idProduct=c52b [ 14.307685] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 14.307686] usb 3-4: Product: USB Receiver [ 14.307687] usb 3-4: Manufacturer: Logitech [ 14.309535] usb 2-1: New USB device found, idVendor=8087, idProduct=8002 [ 14.309537] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 14.309813] hub 2-1:1.0: USB hub found [ 14.309897] hub 2-1:1.0: 8 ports detected [ 14.312190] hidraw: raw HID events driver (C) Jiri Kosina [ 14.315607] sd 4:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 14.315608] sd 4:0:0:0: [sdb] 4096-byte physical blocks [ 14.315617] sd 0:0:0:0: [sda] 145226112 512-byte logical blocks: (74.4 GB/69.2 GiB) [ 14.315634] sd 4:0:0:0: [sdb] Write Protect is off [ 14.315636] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 14.315646] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.315754] sd 0:0:0:0: [sda] Write Protect is off [ 14.315756] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 14.315793] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.317627] usbcore: registered new interface driver usbhid [ 14.317628] usbhid: USB HID core driver [ 14.320129] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input2 [ 14.332510] sda: sda1 sda2 < sda5 > [ 14.333302] sd 0:0:0:0: [sda] Attached SCSI disk [ 14.357701] sdb: sdb1 [ 14.358095] sd 4:0:0:0: [sdb] Attached SCSI disk [ 14.369349] sd 5:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 14.369351] sd 5:0:0:0: [sdc] 4096-byte physical blocks [ 14.369376] sd 5:0:0:0: [sdc] Write Protect is off [ 14.369377] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 14.369388] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.369824] scsi 6:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 14.409492] sd 6:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 14.409494] sd 6:0:0:0: [sdd] 4096-byte physical blocks [ 14.409696] sd 6:0:0:0: [sdd] Write Protect is off [ 14.409698] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 14.409771] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.409869] scsi 7:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 14.418736] sdc: sdc1 [ 14.419009] sd 5:0:0:0: [sdc] Attached SCSI disk [ 14.445229] input: Logitech K520 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:046D:C52B.0003/0003:046D:2011.0005/input/input3 [ 14.445510] logitech-hidpp-device 0003:046D:2011.0005: input,hidraw1: USB HID v1.11 Keyboard [Logitech K520] on usb-0000:00:14.0-4:2 [ 14.453821] sdd: sdd1 [ 14.454701] sd 6:0:0:0: [sdd] Attached SCSI disk [ 14.457392] sd 7:0:0:0: [sde] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 14.457394] sd 7:0:0:0: [sde] 4096-byte physical blocks [ 14.457571] sd 7:0:0:0: [sde] Write Protect is off [ 14.457573] sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 14.457626] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.477107] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e33526e660, max_idle_ns: 440795262305 ns [ 14.498786] sde: sde1 [ 14.499537] sd 7:0:0:0: [sde] Attached SCSI disk [ 14.607759] md: bind<sdc1> [ 14.645568] md: bind<sdd1> [ 14.649578] md: raid1 personality registered for level 1 [ 14.650426] md/raid1:md127: active with 2 out of 2 mirrors [ 14.650541] created bitmap (22 pages) for device md127 [ 14.651069] md127: bitmap initialized from disk: read 2 pages, set 0 of 44709 bits [ 14.674595] md: bind<sde1> [ 14.693118] md: bind<sdb1> [ 14.695837] md/raid1:md0: active with 2 out of 2 mirrors [ 14.695959] created bitmap (22 pages) for device md0 [ 14.696496] md0: bitmap initialized from disk: read 2 pages, set 0 of 44709 bits [ 14.715104] md127: detected capacity change from 0 to 3000312528896 [ 14.772815] md0: detected capacity change from 0 to 3000312528896 [ 14.965708] device-mapper: uevent: version 1.0.3 [ 14.965862] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@xxxxxxxxxx [ 15.520082] clocksource: Switched to clocksource tsc [ 19.471187] input: Logitech M310/M310t as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:046D:C52B.0003/0003:046D:4031.0004/input/input4 [ 19.471393] logitech-hidpp-device 0003:046D:4031.0004: input,hidraw2: USB HID v1.11 Mouse [Logitech M310/M310t] on usb-0000:00:14.0-4:1 [ 19.482321] md: linear personality registered for level -1 [ 19.486694] md: multipath personality registered for level -4 [ 19.490898] md: raid0 personality registered for level 0 [ 19.565074] raid6: sse2x1 gen() 6871 MB/s [ 19.633072] raid6: sse2x1 xor() 4867 MB/s [ 19.701071] raid6: sse2x2 gen() 8326 MB/s [ 19.769070] raid6: sse2x2 xor() 5591 MB/s [ 19.837087] raid6: sse2x4 gen() 9830 MB/s [ 19.905072] raid6: sse2x4 xor() 6813 MB/s [ 19.973070] raid6: avx2x1 gen() 13374 MB/s [ 20.041083] raid6: avx2x2 gen() 15411 MB/s [ 20.109084] raid6: avx2x4 gen() 17789 MB/s [ 20.109085] raid6: using algorithm avx2x4 gen() 17789 MB/s [ 20.109086] raid6: using avx2x2 recovery algorithm [ 20.110180] xor: automatically using best checksumming function: [ 20.149069] avx : 21131.000 MB/sec [ 20.150172] async_tx: api initialized (async) [ 20.157324] md: raid6 personality registered for level 6 [ 20.157324] md: raid5 personality registered for level 5 [ 20.157325] md: raid4 personality registered for level 4 [ 20.168086] md: raid10 personality registered for level 10 [ 20.224340] PM: Starting manual resume from disk [ 20.224344] PM: Hibernation image partition 253:5 present [ 20.224344] PM: Looking for hibernation image. [ 20.224477] PM: Image not found (code -22) [ 20.224478] PM: Hibernation image not present or could not be loaded. [ 20.370065] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 22.261884] Error: Driver 'processor_aggregator' is already registered, aborting... [ 22.347415] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 22.377709] power_meter ACPI000D:00: Found ACPI power meter. [ 22.377736] power_meter ACPI000D:00: Ignoring unsafe software power cap! [ 22.378315] wmi: Mapper loaded [ 22.378373] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 22.378378] ACPI: Power Button [PWRB] [ 22.378441] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 22.378445] ACPI: Power Button [PWRF] [ 22.662128] ipmi message handler version 39.2 [ 22.664107] Error: Driver 'processor_aggregator' is already registered, aborting... [ 22.678464] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 22.806607] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 22.806608] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 22.806609] RAPL PMU: hw unit of domain package 2^-14 Joules [ 22.806610] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 22.806610] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 22.892204] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 22.892259] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 22.892305] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 22.892345] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 22.892385] sd 7:0:0:0: Attached scsi generic sg4 type 0 [ 22.945635] ipmi_si IPI0001:00: ipmi_si: probing via ACPI [ 22.945656] ipmi_si IPI0001:00: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 22.945657] ipmi_si: Adding ACPI-specified kcs state machine [ 22.945678] IPMI System Interface driver. [ 22.945714] ipmi_si: probing via SMBIOS [ 22.945715] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 22.945716] ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface [ 22.945718] ipmi_si: probing via SPMI [ 22.945719] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0 [ 22.945720] ipmi_si: Adding SPMI-specified kcs state machine duplicate interface [ 22.945722] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 23.162745] iTCO_vendor_support: vendor-support=0 [ 23.302887] ipmi_si IPI0001:00: Found new BMC (man_id: 0x000a3f, prod_id: 0x0e73, dev_id: 0x20) [ 23.302894] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 23.465955] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 23.466000] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 23.479093] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 23.585343] xen: registering gsi 36 triggering 0 polarity 1 [ 23.585376] xen: --> pirq=36 -> irq=36 (gsi=36) [ 23.585449] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client [ 23.585451] snd_hda_intel 0000:02:00.1: Force to non-snoop mode [ 23.600088] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card0/input8 [ 23.600210] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card0/input9 [ 23.600317] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card0/input10 [ 23.600413] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card0/input11 [ 23.600476] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card0/input12 [ 23.731487] EDAC MC: Ver: 3.0.0 [ 23.792830] EDAC sbridge: Seeking for: PCI ID 8086:6fa0 [ 23.792852] EDAC sbridge: Seeking for: PCI ID 8086:6fa0 [ 23.792875] EDAC sbridge: Seeking for: PCI ID 8086:6fa0 [ 23.792890] EDAC sbridge: Seeking for: PCI ID 8086:6ffc [ 23.792899] EDAC sbridge: Seeking for: PCI ID 8086:6ffc [ 23.792908] EDAC sbridge: Seeking for: PCI ID 8086:6ffc [ 23.792913] EDAC sbridge: Seeking for: PCI ID 8086:6ffd [ 23.792920] EDAC sbridge: Seeking for: PCI ID 8086:6ffd [ 23.792930] EDAC sbridge: Seeking for: PCI ID 8086:6ffd [ 23.792935] EDAC sbridge: Seeking for: PCI ID 8086:6f60 [ 23.792943] EDAC sbridge: Seeking for: PCI ID 8086:6fa8 [ 23.792949] EDAC sbridge: Seeking for: PCI ID 8086:6fa8 [ 23.792957] EDAC sbridge: Seeking for: PCI ID 8086:6fa8 [ 23.792961] EDAC sbridge: Seeking for: PCI ID 8086:6f71 [ 23.792967] EDAC sbridge: Seeking for: PCI ID 8086:6f71 [ 23.792975] EDAC sbridge: Seeking for: PCI ID 8086:6f71 [ 23.792979] EDAC sbridge: Seeking for: PCI ID 8086:6faa [ 23.792985] EDAC sbridge: Seeking for: PCI ID 8086:6faa [ 23.792993] EDAC sbridge: Seeking for: PCI ID 8086:6faa [ 23.792997] EDAC sbridge: Seeking for: PCI ID 8086:6fab [ 23.793003] EDAC sbridge: Seeking for: PCI ID 8086:6fab [ 23.793011] EDAC sbridge: Seeking for: PCI ID 8086:6fab [ 23.793014] EDAC sbridge: Seeking for: PCI ID 8086:6fac [ 23.793022] EDAC sbridge: Seeking for: PCI ID 8086:6fac [ 23.793034] EDAC sbridge: Seeking for: PCI ID 8086:6fac [ 23.793051] EDAC sbridge: Seeking for: PCI ID 8086:6fad [ 23.793059] EDAC sbridge: Seeking for: PCI ID 8086:6fad [ 23.793069] EDAC sbridge: Seeking for: PCI ID 8086:6fad [ 23.793073] EDAC sbridge: Seeking for: PCI ID 8086:6faf [ 23.793082] EDAC sbridge: Seeking for: PCI ID 8086:6faf [ 23.793092] EDAC sbridge: Seeking for: PCI ID 8086:6faf [ 23.793096] EDAC sbridge: Seeking for: PCI ID 8086:6f68 [ 23.793106] EDAC sbridge: Seeking for: PCI ID 8086:6f68 [ 23.793116] EDAC sbridge: Seeking for: PCI ID 8086:6f68 [ 23.793120] EDAC sbridge: Seeking for: PCI ID 8086:6f79 [ 23.793130] EDAC sbridge: Seeking for: PCI ID 8086:6f6a [ 23.793141] EDAC sbridge: Seeking for: PCI ID 8086:6f6b [ 23.793152] EDAC sbridge: Seeking for: PCI ID 8086:6f6c [ 23.793163] EDAC sbridge: Seeking for: PCI ID 8086:6f6d [ 23.793494] EDAC MC0: Giving out device to module sbridge_edac.c controller Broadwell Socket#0: DEV 0000:ff:12.0 (INTERRUPT) [ 23.793697] EDAC MC1: Giving out device to module sbridge_edac.c controller Broadwell Socket#1: DEV 0000:7f:12.0 (INTERRUPT) [ 23.793698] EDAC sbridge: Ver: 1.1.1 [ 23.862210] intel_rapl: Found RAPL domain package [ 23.862218] intel_rapl: Found RAPL domain dram [ 23.862219] intel_rapl: DRAM domain energy unit 15300pj [ 23.862238] intel_rapl: Found RAPL domain package [ 23.862260] intel_rapl: Found RAPL domain dram [ 23.862261] intel_rapl: DRAM domain energy unit 15300pj [ 25.429351] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 25.713450] Adding 4247548k swap on /dev/mapper/vgsys-lvswap. Priority:-1 extents:1 across:4247548k FS [ 26.202127] lp: driver loaded but no devices found [ 26.238488] ppdev: user-space parallel port driver [ 26.256906] parport_pc parport_pc.956: Unable to set coherent dma mask: disabling DMA [ 26.257121] parport_pc parport_pc.888: Unable to set coherent dma mask: disabling DMA [ 26.257303] parport_pc parport_pc.632: Unable to set coherent dma mask: disabling DMA [ 26.299601] loop: module loaded [ 26.340591] pciback 0000:02:00.0: seizing device [ 26.340745] xen: registering gsi 32 triggering 0 polarity 1 [ 26.340762] Already setup the GSI :32 [ 26.340980] xen_pciback: backend is vpci [ 26.364029] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 26.438816] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 27.067763] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 27.072864] xenbr0: port 1(eth1) entered blocking state [ 27.072865] xenbr0: port 1(eth1) entered disabled state [ 27.072950] device eth1 entered promiscuous mode [ 27.116221] igb 0000:05:00.0 eth1: igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 27.119015] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready [ 28.077169] xenbr0: port 1(eth1) entered blocking state [ 28.077171] xenbr0: port 1(eth1) entered forwarding state [ 28.077348] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready [ 35.728968] RPC: Registered named UNIX socket transport module. [ 35.728969] RPC: Registered udp transport module. [ 35.728970] RPC: Registered tcp transport module. [ 35.728971] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 35.759126] FS-Cache: Loaded [ 35.800875] FS-Cache: Netfs 'nfs' registered for caching [ 35.839267] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). [ 40.913401] xen:xen_evtchn: Event-channel device installed
root@cknowsvr01:/home/diederik# dmesg [ 0.000000] Linux version 4.9.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20161229 (Debian 6.3.0-2) ) #1 SMP Debian 4.9.2-2 (2017-01-12) [ 0.000000] Command line: placeholder root=UUID=0e49acdd-69d2-4c95-a5fc-3e1f4daa9b65 ro quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] Released 0 page(s) [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] Xen: [mem 0x000000000009e800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000079cfbfff] usable [ 0.000000] Xen: [mem 0x0000000079cfc000-0x000000007b8c1fff] reserved [ 0.000000] Xen: [mem 0x000000007b8c2000-0x000000007b934fff] ACPI data [ 0.000000] Xen: [mem 0x000000007b935000-0x000000007bedffff] ACPI NVS [ 0.000000] Xen: [mem 0x000000007bee0000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000c7ffc000-0x00000000c7ffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec01fff] reserved [ 0.000000] Xen: [mem 0x00000000fec40000-0x00000000fec40fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x0000000100000000-0x0000000286365fff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: ASUSTeK COMPUTER INC. Z10PA-D8 Series/Z10PA-D8 Series, BIOS 3202 04/18/2016 [ 0.000000] Hypervisor detected: Xen [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x286366 max_arch_pfn = 0x400000000 [ 0.000000] MTRR: Disabled [ 0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000000] e820: last_pfn = 0x79cfc max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] BRK [0x01f4c000, 0x01f4cfff] PGTABLE [ 0.000000] BRK [0x01f4d000, 0x01f4dfff] PGTABLE [ 0.000000] BRK [0x01f4e000, 0x01f4efff] PGTABLE [ 0.000000] BRK [0x01f4f000, 0x01f4ffff] PGTABLE [ 0.000000] BRK [0x01f50000, 0x01f50fff] PGTABLE [ 0.000000] BRK [0x01f51000, 0x01f51fff] PGTABLE [ 0.000000] BRK [0x01f52000, 0x01f52fff] PGTABLE [ 0.000000] BRK [0x01f53000, 0x01f53fff] PGTABLE [ 0.000000] BRK [0x01f54000, 0x01f54fff] PGTABLE [ 0.000000] BRK [0x01f55000, 0x01f55fff] PGTABLE [ 0.000000] BRK [0x01f56000, 0x01f56fff] PGTABLE [ 0.000000] BRK [0x01f57000, 0x01f57fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x04000000-0x053a3fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0580 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x000000007B8EA0B0 0000D4 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x000000007B919410 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x000000007B8EA218 02F1F7 (v02 ALASKA A M I 01072009 INTL 20091013) [ 0.000000] ACPI: FACS 0x000000007BEDEF80 000040 [ 0.000000] ACPI: APIC 0x000000007B919520 000224 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x000000007B919748 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x000000007B919790 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x000000007B919830 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: EINJ 0x000000007B9347D0 000130 (v01 ALASKA A M I 00000001 INTL 00000001) [ 0.000000] ACPI: UEFI 0x000000007B9198C8 000042 (v01 ALASKA A M I 01072009 00000000) [ 0.000000] ACPI: HPET 0x000000007B919910 000038 (v01 ALASKA A M I 00000001 INTL 20091013) [ 0.000000] ACPI: MSCT 0x000000007B919948 000090 (v01 ALASKA A M I 00000001 INTL 20091013) [ 0.000000] ACPI: SLIT 0x000000007B9199D8 000030 (v01 ALASKA A M I 00000001 INTL 20091013) [ 0.000000] ACPI: SRAT 0x000000007B919A08 001158 (v03 ALASKA A M I 00000001 INTL 20091013) [ 0.000000] ACPI: WDDT 0x000000007B91AB60 000040 (v01 ALASKA A M I 00000000 INTL 20091013) [ 0.000000] ACPI: SSDT 0x000000007B91ABA0 016FB3 (v02 ALASKA PmMgt 00000001 INTL 20120913) [ 0.000000] ACPI: NITR 0x000000007B931B58 000071 (v02 ALASKA A M I 00000001 INTL 20091013) [ 0.000000] ACPI: SPMI 0x000000007B931BD0 000041 (v05 ALASKA A M I 00000000 AMI. 00000000) [ 0.000000] ACPI: SSDT 0x000000007B931C18 002652 (v02 ALASKA SpsNm 00000002 INTL 20120913) [ 0.000000] ACPI: SSDT 0x000000007B934270 000064 (v02 ALASKA SpsNvs 00000002 INTL 20120913) [ 0.000000] ACPI: PRAD 0x000000007B9342D8 000102 (v02 ALASKA A M I 00000002 INTL 20120913) [ 0.000000] ACPI: RMAD 0x000000007B9343E0 0000E8 (v01 ALASKA A M I 00000001 INTL 20091013) [ 0.000000] ACPI: HEST 0x000000007B9344C8 0000A8 (v01 ALASKA A M I 00000001 INTL 00000001) [ 0.000000] ACPI: BERT 0x000000007B934570 000030 (v01 ALASKA A M I 00000001 INTL 00000001) [ 0.000000] ACPI: ERST 0x000000007B9345A0 000230 (v01 ALASKA A M I 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Setting APIC routing to Xen PV. [ 0.000000] NUMA turned off [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000286365fff] [ 0.000000] NODE_DATA(0) allocated [mem 0x1ff010000-0x1ff014fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x0000000286365fff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000079cfbfff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000286365fff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000286365fff] [ 0.000000] On node 0 totalpages: 2097151 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7732 pages used for memmap [ 0.000000] DMA32 zone: 494844 pages, LIFO batch:31 [ 0.000000] Normal zone: 24974 pages used for memmap [ 0.000000] Normal zone: 1598310 pages, LIFO batch:31 [ 0.000000] p2m virtual area at ffffc90000000000, size is 40000000 [ 0.000000] Remapped 549734 page(s) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.000000] IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 32 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x79cfc000-0x7b8c1fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7b8c2000-0x7b934fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7b935000-0x7bedffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7bee0000-0x8fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xc7ffbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xc7ffc000-0xc7ffcfff] [ 0.000000] PM: Registered nosave memory: [mem 0xc7ffd000-0xfbffbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfbffc000-0xfbffcfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfbffd000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec3ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec40000-0xfec40fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec41000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed44fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0x90000000-0xc7ffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.8.1-pre (preserve-AD) [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:32 nr_node_ids:1 [ 0.000000] percpu: Embedded 35 pages/cpu @ffff880285a00000 s103768 r8192 d31400 u262144 [ 0.000000] pcpu-alloc: s103768 r8192 d31400 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 [ 0.000000] xen: PV spinlocks enabled [ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes) [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2064360 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: placeholder root=UUID=0e49acdd-69d2-4c95-a5fc-3e1f4daa9b65 ro quiet [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 126976 bytes [ 0.000000] log_buf_len min size: 131072 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 117792(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] software IO TLB [mem 0x281a00000-0x285a00000] (64MB) mapped at [ffff880281a00000-ffff8802859fffff] [ 0.000000] Memory: 8115652K/8388604K available (6138K kernel code, 1134K rwdata, 2840K rodata, 1392K init, 812K bss, 272952K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=32. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=32 [ 0.000000] Using NULL legacy PIC [ 0.000000] NR_IRQS:33024 nr_irqs:1496 0 [ 0.000000] xen:events: Using FIFO-based ABI [ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2095.322 MHz processor [ 13.009513] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.30 BogoMIPS (lpj=8380600) [ 13.009517] pid_max: default: 32768 minimum: 301 [ 13.009565] ACPI: Core revision 20160831 [ 13.091424] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 13.091859] Security Framework initialized [ 13.091861] Yama: disabled by default; enable with sysctl kernel.yama.* [ 13.091868] AppArmor: AppArmor disabled by boot time parameter [ 13.093107] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 13.095197] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 13.095957] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 13.095977] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 13.096422] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 13.096423] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 13.096426] CPU: Physical Processor ID: 0 [ 13.096426] CPU: Processor Core ID: 0 [ 13.096430] mce: CPU supports 2 MCE banks [ 13.096450] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 13.096450] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 13.096840] Freeing SMP alternatives memory: 24K (ffffffff81e79000 - ffffffff81e7f000) [ 13.099076] ftrace: allocating 24972 entries in 98 pages [ 13.110631] cpu 0 spinlock event irq 73 [ 13.110638] smpboot: Max logical packages: 4 [ 13.110647] VPMU disabled by hypervisor. [ 13.110672] Performance Events: Broadwell events, PMU not available due to virtualization, using software events only. [ 13.111887] NMI watchdog: disabled (cpu0): hardware events not enabled [ 13.111888] NMI watchdog: Shutting down hard lockup detector on all cpus [ 13.112043] installing Xen timer for CPU 1 [ 13.112272] [Firmware Bug]: CPU1: APIC id mismatch. Firmware: 0 APIC: 1 [ 13.112354] cpu 1 spinlock event irq 85 [ 13.112539] installing Xen timer for CPU 2 [ 13.112728] [Firmware Bug]: CPU2: APIC id mismatch. Firmware: 0 APIC: 2 [ 13.112785] cpu 2 spinlock event irq 92 [ 13.112961] installing Xen timer for CPU 3 [ 13.113151] [Firmware Bug]: CPU3: APIC id mismatch. Firmware: 0 APIC: 3 [ 13.113198] cpu 3 spinlock event irq 99 [ 13.113373] installing Xen timer for CPU 4 [ 13.113558] [Firmware Bug]: CPU4: APIC id mismatch. Firmware: 0 APIC: 4 [ 13.113619] cpu 4 spinlock event irq 106 [ 13.113793] installing Xen timer for CPU 5 [ 13.113969] [Firmware Bug]: CPU5: APIC id mismatch. Firmware: 0 APIC: 5 [ 13.114022] cpu 5 spinlock event irq 113 [ 13.114193] installing Xen timer for CPU 6 [ 13.114362] [Firmware Bug]: CPU6: APIC id mismatch. Firmware: 0 APIC: 6 [ 13.114424] cpu 6 spinlock event irq 120 [ 13.114601] installing Xen timer for CPU 7 [ 13.114770] [Firmware Bug]: CPU7: APIC id mismatch. Firmware: 0 APIC: 7 [ 13.114824] cpu 7 spinlock event irq 127 [ 13.114991] installing Xen timer for CPU 8 [ 13.115165] [Firmware Bug]: CPU8: APIC id mismatch. Firmware: 0 APIC: 8 [ 13.115226] cpu 8 spinlock event irq 134 [ 13.115394] installing Xen timer for CPU 9 [ 13.115567] [Firmware Bug]: CPU9: APIC id mismatch. Firmware: 0 APIC: 9 [ 13.115620] cpu 9 spinlock event irq 141 [ 13.115784] installing Xen timer for CPU 10 [ 13.115951] [Firmware Bug]: CPU10: APIC id mismatch. Firmware: 0 APIC: a [ 13.116015] cpu 10 spinlock event irq 148 [ 13.116198] installing Xen timer for CPU 11 [ 13.116356] [Firmware Bug]: CPU11: APIC id mismatch. Firmware: 0 APIC: b [ 13.116410] cpu 11 spinlock event irq 155 [ 13.116577] installing Xen timer for CPU 12 [ 13.116754] [Firmware Bug]: CPU12: APIC id mismatch. Firmware: 0 APIC: c [ 13.116816] cpu 12 spinlock event irq 162 [ 13.116983] installing Xen timer for CPU 13 [ 13.117131] [Firmware Bug]: CPU13: APIC id mismatch. Firmware: 0 APIC: d [ 13.117184] cpu 13 spinlock event irq 169 [ 13.117352] installing Xen timer for CPU 14 [ 13.117500] [Firmware Bug]: CPU14: APIC id mismatch. Firmware: 0 APIC: e [ 13.117568] cpu 14 spinlock event irq 176 [ 13.117739] installing Xen timer for CPU 15 [ 13.117887] [Firmware Bug]: CPU15: APIC id mismatch. Firmware: 0 APIC: f [ 13.117942] cpu 15 spinlock event irq 183 [ 13.118112] installing Xen timer for CPU 16 [ 13.118343] [Firmware Bug]: CPU16: APIC id mismatch. Firmware: 0 APIC: 10 [ 13.118492] cpu 16 spinlock event irq 190 [ 13.118707] installing Xen timer for CPU 17 [ 13.118865] [Firmware Bug]: CPU17: APIC id mismatch. Firmware: 0 APIC: 11 [ 13.118933] cpu 17 spinlock event irq 197 [ 13.119117] installing Xen timer for CPU 18 [ 13.119275] [Firmware Bug]: CPU18: APIC id mismatch. Firmware: 0 APIC: 12 [ 13.119347] cpu 18 spinlock event irq 204 [ 13.119531] installing Xen timer for CPU 19 [ 13.119680] [Firmware Bug]: CPU19: APIC id mismatch. Firmware: 0 APIC: 13 [ 13.119744] cpu 19 spinlock event irq 211 [ 13.119926] installing Xen timer for CPU 20 [ 13.120084] [Firmware Bug]: CPU20: APIC id mismatch. Firmware: 0 APIC: 14 [ 13.120155] cpu 20 spinlock event irq 218 [ 13.120340] installing Xen timer for CPU 21 [ 13.120490] [Firmware Bug]: CPU21: APIC id mismatch. Firmware: 0 APIC: 15 [ 13.120555] cpu 21 spinlock event irq 225 [ 13.120751] installing Xen timer for CPU 22 [ 13.120902] [Firmware Bug]: CPU22: APIC id mismatch. Firmware: 0 APIC: 16 [ 13.120977] cpu 22 spinlock event irq 232 [ 13.121161] installing Xen timer for CPU 23 [ 13.121319] [Firmware Bug]: CPU23: APIC id mismatch. Firmware: 0 APIC: 17 [ 13.121382] cpu 23 spinlock event irq 239 [ 13.121565] installing Xen timer for CPU 24 [ 13.121724] [Firmware Bug]: CPU24: APIC id mismatch. Firmware: 0 APIC: 18 [ 13.121797] cpu 24 spinlock event irq 246 [ 13.121982] installing Xen timer for CPU 25 [ 13.122138] [Firmware Bug]: CPU25: APIC id mismatch. Firmware: 0 APIC: 19 [ 13.122203] cpu 25 spinlock event irq 253 [ 13.122397] installing Xen timer for CPU 26 [ 13.122557] [Firmware Bug]: CPU26: APIC id mismatch. Firmware: 0 APIC: 1a [ 13.122631] cpu 26 spinlock event irq 260 [ 13.122828] installing Xen timer for CPU 27 [ 13.122989] [Firmware Bug]: CPU27: APIC id mismatch. Firmware: 0 APIC: 1b [ 13.123055] cpu 27 spinlock event irq 267 [ 13.123250] installing Xen timer for CPU 28 [ 13.123410] [Firmware Bug]: CPU28: APIC id mismatch. Firmware: 0 APIC: 1c [ 13.123484] cpu 28 spinlock event irq 274 [ 13.123682] installing Xen timer for CPU 29 [ 13.123838] [Firmware Bug]: CPU29: APIC id mismatch. Firmware: 0 APIC: 1d [ 13.123902] cpu 29 spinlock event irq 281 [ 13.124096] installing Xen timer for CPU 30 [ 13.124251] [Firmware Bug]: CPU30: APIC id mismatch. Firmware: 0 APIC: 1e [ 13.124327] cpu 30 spinlock event irq 288 [ 13.124522] installing Xen timer for CPU 31 [ 13.124676] [Firmware Bug]: CPU31: APIC id mismatch. Firmware: 0 APIC: 1f [ 13.124741] cpu 31 spinlock event irq 295 [ 13.124806] x86: Booted up 1 node, 32 CPUs [ 13.126582] devtmpfs: initialized [ 13.126656] x86/mm: Memory block size: 128MB [ 13.130130] PM: Registering ACPI NVS region [mem 0x7b935000-0x7bedffff] (5943296 bytes) [ 13.130481] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 13.130790] pinctrl core: initialized pinctrl subsystem [ 13.131068] NET: Registered protocol family 16 [ 13.131076] xen:grant_table: Grant tables using version 1 layout [ 13.131105] Grant table initialized [ 13.132468] ACPI: bus type PCI registered [ 13.132469] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 13.133154] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 13.133156] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 13.165013] PCI: Using configuration type 1 for base access [ 13.180479] ACPI: Added _OSI(Module Device) [ 13.180480] ACPI: Added _OSI(Processor Device) [ 13.180480] ACPI: Added _OSI(3.0 _SCP Extensions) [ 13.180482] ACPI: Added _OSI(Processor Aggregator Device) [ 13.180630] xen: registering gsi 9 triggering 0 polarity 0 [ 13.200266] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 13.255153] random: fast init done [ 13.255401] ACPI: Dynamic OEM Table Load: [ 13.298156] ACPI: Interpreter enabled [ 13.298175] ACPI: (supports S0 S4 S5) [ 13.298176] ACPI: Using IOAPIC for interrupt routing [ 13.298260] HEST: Table parsing has been initialized. [ 13.298263] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 13.347541] ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff]) [ 13.347545] acpi PNP0A03:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 13.351624] acpi PNP0A03:02: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 13.351679] PCI host bridge to bus 0000:ff [ 13.351681] pci_bus 0000:ff: root bus resource [bus ff] [ 13.351705] pci 0000:ff:08.0: [8086:6f80] type 00 class 0x088000 [ 13.351853] pci 0000:ff:08.2: [8086:6f32] type 00 class 0x110100 [ 13.351989] pci 0000:ff:08.3: [8086:6f83] type 00 class 0x088000 [ 13.352145] pci 0000:ff:09.0: [8086:6f90] type 00 class 0x088000 [ 13.352269] pci 0000:ff:09.2: [8086:6f33] type 00 class 0x110100 [ 13.352397] pci 0000:ff:09.3: [8086:6f93] type 00 class 0x088000 [ 13.352555] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 13.352678] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 13.352798] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 13.352920] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 13.353048] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 13.353169] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 13.353290] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 13.353411] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 13.353532] pci 0000:ff:0c.4: [8086:6fe4] type 00 class 0x088000 [ 13.353654] pci 0000:ff:0c.5: [8086:6fe5] type 00 class 0x088000 [ 13.353776] pci 0000:ff:0c.6: [8086:6fe6] type 00 class 0x088000 [ 13.353898] pci 0000:ff:0c.7: [8086:6fe7] type 00 class 0x088000 [ 13.354022] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 13.354142] pci 0000:ff:0f.1: [8086:6ff9] type 00 class 0x088000 [ 13.354266] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 13.354388] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 13.354510] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 13.354634] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 13.354755] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 13.354883] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 13.355004] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 13.355126] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 13.355258] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 13.355339] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 13.355482] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 13.355659] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 13.355815] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 13.355971] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 13.356123] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 13.356279] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 13.356427] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 13.356552] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 13.356682] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 13.356836] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 13.356990] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 13.357147] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 13.357296] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 13.357425] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 13.357551] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 13.357676] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 13.357807] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 13.357965] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 13.358122] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 13.358280] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 13.358444] pci 0000:ff:16.0: [8086:6f68] type 00 class 0x088000 [ 13.358608] pci 0000:ff:16.6: [8086:6f6e] type 00 class 0x088000 [ 13.358732] pci 0000:ff:16.7: [8086:6f6f] type 00 class 0x088000 [ 13.358861] pci 0000:ff:17.0: [8086:6fd0] type 00 class 0x088000 [ 13.359018] pci 0000:ff:17.4: [8086:6fb8] type 00 class 0x088000 [ 13.359144] pci 0000:ff:17.5: [8086:6fb9] type 00 class 0x088000 [ 13.359275] pci 0000:ff:17.6: [8086:6fba] type 00 class 0x088000 [ 13.359405] pci 0000:ff:17.7: [8086:6fbb] type 00 class 0x088000 [ 13.359547] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 13.359675] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 13.359799] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 13.359923] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 13.359992] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 13.360127] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 13.360251] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 13.360448] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f]) [ 13.360450] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 13.362558] acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 13.362608] PCI host bridge to bus 0000:7f [ 13.362610] pci_bus 0000:7f: root bus resource [bus 7f] [ 13.362632] pci 0000:7f:08.0: [8086:6f80] type 00 class 0x088000 [ 13.362761] pci 0000:7f:08.2: [8086:6f32] type 00 class 0x110100 [ 13.362892] pci 0000:7f:08.3: [8086:6f83] type 00 class 0x088000 [ 13.363044] pci 0000:7f:09.0: [8086:6f90] type 00 class 0x088000 [ 13.363166] pci 0000:7f:09.2: [8086:6f33] type 00 class 0x110100 [ 13.363304] pci 0000:7f:09.3: [8086:6f93] type 00 class 0x088000 [ 13.363466] pci 0000:7f:0b.0: [8086:6f81] type 00 class 0x088000 [ 13.363589] pci 0000:7f:0b.1: [8086:6f36] type 00 class 0x110100 [ 13.363707] pci 0000:7f:0b.2: [8086:6f37] type 00 class 0x110100 [ 13.363824] pci 0000:7f:0b.3: [8086:6f76] type 00 class 0x088000 [ 13.363949] pci 0000:7f:0c.0: [8086:6fe0] type 00 class 0x088000 [ 13.364068] pci 0000:7f:0c.1: [8086:6fe1] type 00 class 0x088000 [ 13.364184] pci 0000:7f:0c.2: [8086:6fe2] type 00 class 0x088000 [ 13.364301] pci 0000:7f:0c.3: [8086:6fe3] type 00 class 0x088000 [ 13.364419] pci 0000:7f:0c.4: [8086:6fe4] type 00 class 0x088000 [ 13.364537] pci 0000:7f:0c.5: [8086:6fe5] type 00 class 0x088000 [ 13.364657] pci 0000:7f:0c.6: [8086:6fe6] type 00 class 0x088000 [ 13.364775] pci 0000:7f:0c.7: [8086:6fe7] type 00 class 0x088000 [ 13.364897] pci 0000:7f:0f.0: [8086:6ff8] type 00 class 0x088000 [ 13.365015] pci 0000:7f:0f.1: [8086:6ff9] type 00 class 0x088000 [ 13.365138] pci 0000:7f:0f.4: [8086:6ffc] type 00 class 0x088000 [ 13.365257] pci 0000:7f:0f.5: [8086:6ffd] type 00 class 0x088000 [ 13.365380] pci 0000:7f:0f.6: [8086:6ffe] type 00 class 0x088000 [ 13.365501] pci 0000:7f:10.0: [8086:6f1d] type 00 class 0x088000 [ 13.365620] pci 0000:7f:10.1: [8086:6f34] type 00 class 0x110100 [ 13.365746] pci 0000:7f:10.5: [8086:6f1e] type 00 class 0x088000 [ 13.365865] pci 0000:7f:10.6: [8086:6f7d] type 00 class 0x110100 [ 13.365981] pci 0000:7f:10.7: [8086:6f1f] type 00 class 0x088000 [ 13.366104] pci 0000:7f:12.0: [8086:6fa0] type 00 class 0x088000 [ 13.366172] pci 0000:7f:12.1: [8086:6f30] type 00 class 0x110100 [ 13.366313] pci 0000:7f:13.0: [8086:6fa8] type 00 class 0x088000 [ 13.366473] pci 0000:7f:13.1: [8086:6f71] type 00 class 0x088000 [ 13.366625] pci 0000:7f:13.2: [8086:6faa] type 00 class 0x088000 [ 13.366778] pci 0000:7f:13.3: [8086:6fab] type 00 class 0x088000 [ 13.366930] pci 0000:7f:13.4: [8086:6fac] type 00 class 0x088000 [ 13.367083] pci 0000:7f:13.5: [8086:6fad] type 00 class 0x088000 [ 13.367230] pci 0000:7f:13.6: [8086:6fae] type 00 class 0x088000 [ 13.367364] pci 0000:7f:13.7: [8086:6faf] type 00 class 0x088000 [ 13.367494] pci 0000:7f:14.0: [8086:6fb0] type 00 class 0x088000 [ 13.367648] pci 0000:7f:14.1: [8086:6fb1] type 00 class 0x088000 [ 13.367801] pci 0000:7f:14.2: [8086:6fb2] type 00 class 0x088000 [ 13.367955] pci 0000:7f:14.3: [8086:6fb3] type 00 class 0x088000 [ 13.368101] pci 0000:7f:14.4: [8086:6fbc] type 00 class 0x088000 [ 13.368222] pci 0000:7f:14.5: [8086:6fbd] type 00 class 0x088000 [ 13.368342] pci 0000:7f:14.6: [8086:6fbe] type 00 class 0x088000 [ 13.368464] pci 0000:7f:14.7: [8086:6fbf] type 00 class 0x088000 [ 13.368593] pci 0000:7f:15.0: [8086:6fb4] type 00 class 0x088000 [ 13.368747] pci 0000:7f:15.1: [8086:6fb5] type 00 class 0x088000 [ 13.368901] pci 0000:7f:15.2: [8086:6fb6] type 00 class 0x088000 [ 13.369054] pci 0000:7f:15.3: [8086:6fb7] type 00 class 0x088000 [ 13.369213] pci 0000:7f:16.0: [8086:6f68] type 00 class 0x088000 [ 13.369371] pci 0000:7f:16.6: [8086:6f6e] type 00 class 0x088000 [ 13.369495] pci 0000:7f:16.7: [8086:6f6f] type 00 class 0x088000 [ 13.369620] pci 0000:7f:17.0: [8086:6fd0] type 00 class 0x088000 [ 13.369774] pci 0000:7f:17.4: [8086:6fb8] type 00 class 0x088000 [ 13.369898] pci 0000:7f:17.5: [8086:6fb9] type 00 class 0x088000 [ 13.370020] pci 0000:7f:17.6: [8086:6fba] type 00 class 0x088000 [ 13.370146] pci 0000:7f:17.7: [8086:6fbb] type 00 class 0x088000 [ 13.370286] pci 0000:7f:1e.0: [8086:6f98] type 00 class 0x088000 [ 13.370407] pci 0000:7f:1e.1: [8086:6f99] type 00 class 0x088000 [ 13.370530] pci 0000:7f:1e.2: [8086:6f9a] type 00 class 0x088000 [ 13.370650] pci 0000:7f:1e.3: [8086:6fc0] type 00 class 0x088000 [ 13.370719] pci 0000:7f:1e.4: [8086:6f9c] type 00 class 0x088000 [ 13.370850] pci 0000:7f:1f.0: [8086:6f88] type 00 class 0x088000 [ 13.370976] pci 0000:7f:1f.2: [8086:6f8a] type 00 class 0x088000 [ 13.384830] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 13.384834] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 13.386952] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 13.387477] PCI host bridge to bus 0000:00 [ 13.387479] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 13.387480] pci_bus 0000:00: root bus resource [io 0x1000-0xbfff window] [ 13.387481] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 13.387483] pci_bus 0000:00: root bus resource [mem 0x90000000-0xc7ffbfff window] [ 13.387484] pci_bus 0000:00: root bus resource [bus 00-7e] [ 13.387502] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 13.387751] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 13.387879] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 13.387982] pci 0000:00:01.0: System wakeup disabled by ACPI [ 13.388046] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 13.388168] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 13.388266] pci 0000:00:02.0: System wakeup disabled by ACPI [ 13.388329] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 13.388451] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 13.388549] pci 0000:00:03.0: System wakeup disabled by ACPI [ 13.388609] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 13.388831] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 13.389080] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 13.389304] pci 0000:00:05.4: [8086:6f2c] type 00 class 0x080020 [ 13.389321] pci 0000:00:05.4: reg 0x10: [mem 0xc7f19000-0xc7f19fff] [ 13.389598] pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000 [ 13.389956] pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601 [ 13.389989] pci 0000:00:11.4: reg 0x10: [io 0xb110-0xb117] [ 13.390016] pci 0000:00:11.4: reg 0x14: [io 0xb100-0xb103] [ 13.390034] pci 0000:00:11.4: reg 0x18: [io 0xb0f0-0xb0f7] [ 13.390053] pci 0000:00:11.4: reg 0x1c: [io 0xb0e0-0xb0e3] [ 13.390069] pci 0000:00:11.4: reg 0x20: [io 0xb020-0xb03f] [ 13.390086] pci 0000:00:11.4: reg 0x24: [mem 0xc7f18000-0xc7f187ff] [ 13.390184] pci 0000:00:11.4: PME# supported from D3hot [ 13.390370] pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330 [ 13.390408] pci 0000:00:14.0: reg 0x10: [mem 0xc7f00000-0xc7f0ffff 64bit] [ 13.390552] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 13.390668] pci 0000:00:14.0: System wakeup disabled by ACPI [ 13.390739] pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000 [ 13.390775] pci 0000:00:16.0: reg 0x10: [mem 0xc7f17000-0xc7f1700f 64bit] [ 13.390929] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 13.391098] pci 0000:00:16.1: [8086:8d3b] type 00 class 0x078000 [ 13.391143] pci 0000:00:16.1: reg 0x10: [mem 0xc7f16000-0xc7f1600f 64bit] [ 13.391310] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 13.391510] pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320 [ 13.391551] pci 0000:00:1a.0: reg 0x10: [mem 0xc7f14000-0xc7f143ff] [ 13.391730] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 13.391843] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 13.391924] pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400 [ 13.392082] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 13.392147] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 13.392152] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 13.392223] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 13.392308] pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400 [ 13.392467] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 13.392509] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 13.392513] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 13.392584] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 13.392665] pci 0000:00:1c.5: [8086:8d1a] type 01 class 0x060400 [ 13.392823] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 13.392863] pci 0000:00:1c.5: Enabling MPC IRBNCE [ 13.392876] pci 0000:00:1c.5: Intel PCH root port ACS workaround enabled [ 13.392949] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 13.393034] pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320 [ 13.393068] pci 0000:00:1d.0: reg 0x10: [mem 0xc7f13000-0xc7f133ff] [ 13.393250] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 13.393357] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 13.393434] pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100 [ 13.393780] pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601 [ 13.393810] pci 0000:00:1f.2: reg 0x10: [io 0xb070-0xb077] [ 13.393827] pci 0000:00:1f.2: reg 0x14: [io 0xb060-0xb063] [ 13.393842] pci 0000:00:1f.2: reg 0x18: [io 0xb050-0xb057] [ 13.393857] pci 0000:00:1f.2: reg 0x1c: [io 0xb040-0xb043] [ 13.393872] pci 0000:00:1f.2: reg 0x20: [io 0xb000-0xb01f] [ 13.393888] pci 0000:00:1f.2: reg 0x24: [mem 0xc7f12000-0xc7f127ff] [ 13.393979] pci 0000:00:1f.2: PME# supported from D3hot [ 13.394127] pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500 [ 13.394157] pci 0000:00:1f.3: reg 0x10: [mem 0xc7f11000-0xc7f110ff 64bit] [ 13.394201] pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f] [ 13.394652] pci 0000:00:01.0: PCI bridge to [bus 01] [ 13.394937] pci 0000:02:00.0: [1002:67ef] type 00 class 0x030000 [ 13.394968] pci 0000:02:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref] [ 13.394992] pci 0000:02:00.0: reg 0x18: [mem 0xc0000000-0xc01fffff 64bit pref] [ 13.395007] pci 0000:02:00.0: reg 0x20: [io 0xa000-0xa0ff] [ 13.395021] pci 0000:02:00.0: reg 0x24: [mem 0xc7e00000-0xc7e3ffff] [ 13.395036] pci 0000:02:00.0: reg 0x30: [mem 0xc7e40000-0xc7e5ffff pref] [ 13.395147] pci 0000:02:00.0: supports D1 D2 [ 13.395149] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 13.395302] pci 0000:02:00.1: [1002:aae0] type 00 class 0x040300 [ 13.395332] pci 0000:02:00.1: reg 0x10: [mem 0xc7e60000-0xc7e63fff 64bit] [ 13.395503] pci 0000:02:00.1: supports D1 D2 [ 13.395631] pci 0000:00:02.0: PCI bridge to [bus 02] [ 13.395635] pci 0000:00:02.0: bridge window [io 0xa000-0xafff] [ 13.395640] pci 0000:00:02.0: bridge window [mem 0xc7e00000-0xc7efffff] [ 13.395648] pci 0000:00:02.0: bridge window [mem 0xb0000000-0xc01fffff 64bit pref] [ 13.395903] pci 0000:00:03.0: PCI bridge to [bus 03] [ 13.396022] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 13.396199] pci 0000:05:00.0: [8086:1533] type 00 class 0x020000 [ 13.396236] pci 0000:05:00.0: reg 0x10: [mem 0xc7d00000-0xc7d7ffff] [ 13.396281] pci 0000:05:00.0: reg 0x18: [io 0x9000-0x901f] [ 13.396305] pci 0000:05:00.0: reg 0x1c: [mem 0xc7d80000-0xc7d83fff] [ 13.396557] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 13.411593] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 13.411612] pci 0000:00:1c.4: bridge window [io 0x9000-0x9fff] [ 13.411629] pci 0000:00:1c.4: bridge window [mem 0xc7d00000-0xc7dfffff] [ 13.411909] pci 0000:06:00.0: [8086:1533] type 00 class 0x020000 [ 13.411969] pci 0000:06:00.0: reg 0x10: [mem 0xc7c00000-0xc7c7ffff] [ 13.412054] pci 0000:06:00.0: reg 0x18: [io 0x8000-0x801f] [ 13.412087] pci 0000:06:00.0: reg 0x1c: [mem 0xc7c80000-0xc7c83fff] [ 13.412342] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 13.423761] pci 0000:00:1c.5: PCI bridge to [bus 06] [ 13.423780] pci 0000:00:1c.5: bridge window [io 0x8000-0x8fff] [ 13.423797] pci 0000:00:1c.5: bridge window [mem 0xc7c00000-0xc7cfffff] [ 13.423955] pci_bus 0000:00: on NUMA node 0 [ 13.424046] xen: registering gsi 13 triggering 1 polarity 0 [ 13.425347] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe]) [ 13.425350] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 13.425715] acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 13.425947] PCI host bridge to bus 0000:80 [ 13.425949] pci_bus 0000:80: root bus resource [io 0xc000-0xffff window] [ 13.425950] pci_bus 0000:80: root bus resource [mem 0xc8000000-0xfbffbfff window] [ 13.425952] pci_bus 0000:80: root bus resource [bus 80-fe] [ 13.425978] pci 0000:80:05.0: [8086:6f28] type 00 class 0x088000 [ 13.426193] pci 0000:80:05.1: [8086:6f29] type 00 class 0x088000 [ 13.426437] pci 0000:80:05.2: [8086:6f2a] type 00 class 0x088000 [ 13.426644] pci 0000:80:05.4: [8086:6f2c] type 00 class 0x080020 [ 13.426664] pci 0000:80:05.4: reg 0x10: [mem 0xfbf00000-0xfbf00fff] [ 13.426923] pci_bus 0000:80: on NUMA node 1 [ 13.427305] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 12 14 15) [ 13.427410] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 *7 9 12 14 15) [ 13.427514] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *10 12 14 15) [ 13.427610] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 *11 12 14 15) [ 13.427730] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 13.427837] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 13.427936] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 13.428040] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 13.428252] ACPI: Enabled 1 GPEs in block 00 to 3F [ 13.432855] xen:balloon: Initialising balloon driver [ 13.432938] xen_balloon: Initialising balloon driver [ 13.433119] vgaarb: setting as boot device: PCI:0000:02:00.0 [ 13.433120] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 13.433121] vgaarb: loaded [ 13.433122] vgaarb: bridge control possible 0000:02:00.0 [ 13.433335] PCI: Using ACPI for IRQ routing [ 13.447257] PCI: pci_cache_line_size set to 64 bytes [ 13.447856] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 13.447858] e820: reserve RAM buffer [mem 0x79cfc000-0x7bffffff] [ 13.447859] e820: reserve RAM buffer [mem 0x286366000-0x287ffffff] [ 13.448316] clocksource: Switched to clocksource xen [ 13.457155] VFS: Disk quotas dquot_6.6.0 [ 13.457282] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 13.457309] hugetlbfs: disabling because there are no supported hugepage sizes [ 13.457344] pnp: PnP ACPI init [ 13.457758] xen: registering gsi 8 triggering 1 polarity 0 [ 13.457805] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 13.457943] system 00:01: [io 0x0500-0x057f] has been reserved [ 13.457944] system 00:01: [io 0x0400-0x047f] has been reserved [ 13.457946] system 00:01: [io 0x0580-0x059f] has been reserved [ 13.457947] system 00:01: [io 0x0600-0x061f] has been reserved [ 13.457949] system 00:01: [io 0x0880-0x0883] has been reserved [ 13.457951] system 00:01: [io 0x0800-0x081f] has been reserved [ 13.457953] system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved [ 13.457954] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 13.457956] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 13.457957] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 13.457958] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 13.457959] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 13.457961] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 13.457963] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 13.458187] system 00:02: [io 0x0290-0x029f] has been reserved [ 13.458189] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 13.458601] xen: registering gsi 4 triggering 1 polarity 0 [ 13.458626] pnp 00:03: [dma 0 disabled] [ 13.458672] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 13.459080] xen: registering gsi 3 triggering 1 polarity 0 [ 13.459105] pnp 00:04: [dma 0 disabled] [ 13.459148] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 13.460047] pnp: PnP ACPI: found 5 devices [ 13.469008] PM-Timer failed consistency check (0xffffff) - aborting. [ 13.469098] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 13.469100] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 13.469102] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000 [ 13.469143] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 13.469145] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 13.469146] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 13.469147] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 13.469148] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 13.469150] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 13.469153] pci 0000:00:1c.0: BAR 14: assigned [mem 0x90000000-0x901fffff] [ 13.469157] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90200000-0x903fffff 64bit pref] [ 13.469159] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 13.469160] pci 0000:00:01.0: PCI bridge to [bus 01] [ 13.469178] pci 0000:00:02.0: PCI bridge to [bus 02] [ 13.469181] pci 0000:00:02.0: bridge window [io 0xa000-0xafff] [ 13.469187] pci 0000:00:02.0: bridge window [mem 0xc7e00000-0xc7efffff] [ 13.469191] pci 0000:00:02.0: bridge window [mem 0xb0000000-0xc01fffff 64bit pref] [ 13.469199] pci 0000:00:03.0: PCI bridge to [bus 03] [ 13.469215] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 13.469223] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 13.469231] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x901fffff] [ 13.469236] pci 0000:00:1c.0: bridge window [mem 0x90200000-0x903fffff 64bit pref] [ 13.469246] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 13.469249] pci 0000:00:1c.4: bridge window [io 0x9000-0x9fff] [ 13.469257] pci 0000:00:1c.4: bridge window [mem 0xc7d00000-0xc7dfffff] [ 13.469270] pci 0000:00:1c.5: PCI bridge to [bus 06] [ 13.469273] pci 0000:00:1c.5: bridge window [io 0x8000-0x8fff] [ 13.469281] pci 0000:00:1c.5: bridge window [mem 0xc7c00000-0xc7cfffff] [ 13.469295] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 13.469296] pci_bus 0000:00: resource 5 [io 0x1000-0xbfff window] [ 13.469297] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 13.469299] pci_bus 0000:00: resource 7 [mem 0x90000000-0xc7ffbfff window] [ 13.469300] pci_bus 0000:02: resource 0 [io 0xa000-0xafff] [ 13.469301] pci_bus 0000:02: resource 1 [mem 0xc7e00000-0xc7efffff] [ 13.469302] pci_bus 0000:02: resource 2 [mem 0xb0000000-0xc01fffff 64bit pref] [ 13.469303] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [ 13.469304] pci_bus 0000:04: resource 1 [mem 0x90000000-0x901fffff] [ 13.469305] pci_bus 0000:04: resource 2 [mem 0x90200000-0x903fffff 64bit pref] [ 13.469306] pci_bus 0000:05: resource 0 [io 0x9000-0x9fff] [ 13.469307] pci_bus 0000:05: resource 1 [mem 0xc7d00000-0xc7dfffff] [ 13.469309] pci_bus 0000:06: resource 0 [io 0x8000-0x8fff] [ 13.469310] pci_bus 0000:06: resource 1 [mem 0xc7c00000-0xc7cfffff] [ 13.469443] pci_bus 0000:80: resource 4 [io 0xc000-0xffff window] [ 13.469445] pci_bus 0000:80: resource 5 [mem 0xc8000000-0xfbffbfff window] [ 13.469857] NET: Registered protocol family 2 [ 13.470434] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 13.470703] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 13.470882] TCP: Hash tables configured (established 65536 bind 65536) [ 13.470948] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 13.470995] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 13.471162] NET: Registered protocol family 1 [ 13.471595] xen: registering gsi 19 triggering 0 polarity 1 [ 13.471632] xen: --> pirq=19 -> irq=19 (gsi=19) [ 13.471923] xen: registering gsi 19 triggering 0 polarity 1 [ 13.471928] Already setup the GSI :19 [ 13.496503] xen: registering gsi 18 triggering 0 polarity 1 [ 13.496524] xen: --> pirq=18 -> irq=18 (gsi=18) [ 13.520517] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 13.520521] PCI: CLS mismatch (64 != 32), using 64 bytes [ 13.520580] Unpacking initramfs... [ 13.920210] Freeing initrd memory: 20112K (ffff880004000000 - ffff8800053a4000) [ 13.920355] Intel CQM monitoring enabled [ 13.920355] Intel MBM enabled [ 13.922607] futex hash table entries: 8192 (order: 7, 524288 bytes) [ 13.922784] audit: initializing netlink subsys (disabled) [ 13.922809] audit: type=2000 audit(1485293880.459:1): initialized [ 13.923125] Initialise system trusted keyrings [ 13.923525] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 13.924326] zbud: loaded [ 13.967991] Key type asymmetric registered [ 13.967993] Asymmetric key parser 'x509' registered [ 13.968099] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 13.968229] io scheduler noop registered [ 13.968230] io scheduler deadline registered [ 13.968236] io scheduler cfq registered (default) [ 13.968587] xen: registering gsi 26 triggering 0 polarity 1 [ 13.968624] xen: --> pirq=26 -> irq=26 (gsi=26) [ 13.968912] xen: registering gsi 32 triggering 0 polarity 1 [ 13.968931] xen: --> pirq=32 -> irq=32 (gsi=32) [ 13.969181] xen: registering gsi 40 triggering 0 polarity 1 [ 13.969199] xen: --> pirq=40 -> irq=40 (gsi=40) [ 13.969458] xen: registering gsi 16 triggering 0 polarity 1 [ 13.969475] xen: --> pirq=16 -> irq=16 (gsi=16) [ 13.969776] xen: registering gsi 16 triggering 0 polarity 1 [ 13.969782] Already setup the GSI :16 [ 13.970057] xen: registering gsi 17 triggering 0 polarity 1 [ 13.970075] xen: --> pirq=17 -> irq=17 (gsi=17) [ 13.970345] aer 0000:00:01.0:pcie002: service driver aer loaded [ 13.970389] aer 0000:00:02.0:pcie002: service driver aer loaded [ 13.970430] aer 0000:00:03.0:pcie002: service driver aer loaded [ 13.970451] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 13.970457] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 13.970471] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 13.970472] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 13.970473] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt [ 13.970479] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 13.970492] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt [ 13.970498] pcie_pme 0000:00:03.0:pcie001: service driver pcie_pme loaded [ 13.970538] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 13.970553] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded [ 13.970583] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 13.970584] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt [ 13.970597] pcie_pme 0000:00:1c.4:pcie001: service driver pcie_pme loaded [ 13.970635] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 13.970636] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt [ 13.970650] pcie_pme 0000:00:1c.5:pcie001: service driver pcie_pme loaded [ 13.970660] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 13.970681] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 13.970796] pciehp 0000:00:1c.0:pcie004: service driver pciehp loaded [ 13.970800] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 13.970816] intel_idle: MWAIT substates: 0x2120 [ 13.970817] intel_idle: v0.4.1 model 0x4F [ 13.970830] intel_idle: intel_idle yielding to none [ 13.970929] Monitor-Mwait will be used to enter C-1 state [ 13.970965] Monitor-Mwait will be used to enter C-2 state [ 13.983146] Warning: Processor Platform Limit not supported. [ 13.983362] ERST: Error Record Serialization Table (ERST) support is initialized. [ 13.983365] pstore: using zlib compression [ 13.983368] pstore: Registered erst as persistent store backend [ 13.983741] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 13.984367] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 14.005189] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 14.026066] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 14.026534] hpet_acpi_add: no address or irqs in _CRS [ 14.026576] Linux agpgart interface v0.103 [ 14.026754] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> [ 14.026754] AMD IOMMUv2 functionality not available on this system [ 14.029932] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 14.032727] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 14.032731] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 14.032916] mousedev: PS/2 mouse device common for all mice [ 14.032981] rtc_cmos 00:00: RTC can wake from S4 [ 14.033170] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 14.033249] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 14.034412] ledtrig-cpu: registered to indicate activity on CPUs [ 14.035761] NET: Registered protocol family 10 [ 14.036217] mip6: Mobile IPv6 [ 14.036218] NET: Registered protocol family 17 [ 14.036221] mpls_gso: MPLS GSO support [ 14.037060] mce: Unable to init device /dev/mcelog (rc: -16) [ 14.037189] microcode: sig=0x406f1, pf=0x1, revision=0xb000017 [ 14.037751] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 14.037890] registered taskstats version 1 [ 14.037892] Loading compiled-in X.509 certificates [ 14.041145] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256)) [ 14.041409] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630' [ 14.041465] zswap: loaded using pool lzo/zbud [ 14.043492] rtc_cmos 00:00: setting system clock to 2017-01-24 21:38:00 UTC (1485293880) [ 14.043534] PM: Hibernation image not present or could not be loaded. [ 14.044254] Freeing unused kernel memory: 1392K (ffffffff81d1d000 - ffffffff81e79000) [ 14.044255] Write protecting the kernel read-only data: 12288k [ 14.048437] Freeing unused kernel memory: 2040K (ffff880001602000 - ffff880001800000) [ 14.049165] Freeing unused kernel memory: 1256K (ffff880001ac6000 - ffff880001c00000) [ 14.049170] ------------[ cut here ]------------ [ 14.049175] WARNING: CPU: 18 PID: 1 at /build/linux-fgnWKv/linux-4.9.2/arch/x86/mm/dump_pagetables.c:225 note_page+0x633/0x7d0 [ 14.049176] x86/mm: Found insecure W+X mapping at address ffff880000000000/0xffff880000000000 [ 14.049177] Modules linked in: [ 14.049180] CPU: 18 PID: 1 Comm: swapper/0 Not tainted 4.9.0-1-amd64 #1 Debian 4.9.2-2 [ 14.049181] Hardware name: ASUSTeK COMPUTER INC. Z10PA-D8 Series/Z10PA-D8 Series, BIOS 3202 04/18/2016 [ 14.049182] 0000000000000000 ffffffff81328b84 ffffc90040cabdd8 0000000000000000 [ 14.049185] ffffffff81076dbe ffffc90040cabed0 ffffc90040cabe30 0000000000000004 [ 14.049187] 0000000000000000 ffffc90040cabed0 0000000000000000 ffffffff81076e3f [ 14.049189] Call Trace: [ 14.049194] [<ffffffff81328b84>] ? dump_stack+0x5c/0x78 [ 14.049197] [<ffffffff81076dbe>] ? __warn+0xbe/0xe0 [ 14.049200] [<ffffffff81076e3f>] ? warn_slowpath_fmt+0x5f/0x80 [ 14.049203] [<ffffffff810cdf56>] ? vprintk_emit+0x316/0x4d0 [ 14.049205] [<ffffffff81068343>] ? note_page+0x633/0x7d0 [ 14.049207] [<ffffffff810687ae>] ? ptdump_walk_pgd_level_core+0x2ce/0x3f0 [ 14.049210] [<ffffffff815ec690>] ? rest_init+0x80/0x80 [ 14.049212] [<ffffffff815ec6b6>] ? kernel_init+0x26/0x100 [ 14.049214] [<ffffffff815f9eb5>] ? ret_from_fork+0x25/0x30 [ 14.049216] ---[ end trace b65e8348f1d07061 ]--- [ 14.063047] x86/mm: Checked W+X mappings: FAILED, 5114 W+X pages found. [ 14.212321] random: crng init done [ 14.212687] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED [ 14.236339] pps_core: LinuxPPS API ver. 1 registered [ 14.236340] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 14.237889] PTP clock support registered [ 14.239021] dca service started, version 1.12.1 [ 14.240429] xen: registering gsi 18 triggering 0 polarity 1 [ 14.240456] Already setup the GSI :18 [ 14.240595] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 14.241793] SCSI subsystem initialized [ 14.242730] ACPI: bus type USB registered [ 14.242751] usbcore: registered new interface driver usbfs [ 14.242760] usbcore: registered new interface driver hub [ 14.242955] usbcore: registered new device driver usb [ 14.245129] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 14.245130] igb: Copyright (c) 2007-2014 Intel Corporation. [ 14.245251] xen: registering gsi 16 triggering 0 polarity 1 [ 14.245261] Already setup the GSI :16 [ 14.245754] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 14.246444] igb 0000:05:00.0: PHY reset is blocked due to SOL/IDER session. [ 14.247542] ehci-pci: EHCI PCI platform driver [ 14.247704] xen: registering gsi 19 triggering 0 polarity 1 [ 14.247721] Already setup the GSI :19 [ 14.247823] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 14.247828] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 14.247854] ehci-pci 0000:00:1a.0: debug port 2 [ 14.249037] libata version 3.00 loaded. [ 14.251816] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 14.251897] ehci-pci 0000:00:1a.0: irq 19, io mem 0xc7f14000 [ 14.264343] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 14.264430] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 14.264432] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 14.264434] usb usb1: Product: EHCI Host Controller [ 14.264436] usb usb1: Manufacturer: Linux 4.9.0-1-amd64 ehci_hcd [ 14.264437] usb usb1: SerialNumber: 0000:00:1a.0 [ 14.264686] hub 1-0:1.0: USB hub found [ 14.264693] hub 1-0:1.0: 2 ports detected [ 14.264780] AVX2 version of gcm_enc/dec engaged. [ 14.264781] AES CTR mode by8 optimization enabled [ 14.265049] xen: registering gsi 18 triggering 0 polarity 1 [ 14.265058] Already setup the GSI :18 [ 14.265128] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 14.265132] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 14.265158] ehci-pci 0000:00:1d.0: debug port 2 [ 14.269172] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 14.269183] ehci-pci 0000:00:1d.0: irq 18, io mem 0xc7f13000 [ 14.270766] pps pps0: new PPS source ptp0 [ 14.270768] igb 0000:05:00.0: added PHC on eth0 [ 14.270770] igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection [ 14.270771] igb 0000:05:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 34:97:f6:5c:0a:1f [ 14.270834] igb 0000:05:00.0: eth0: PBA No: 001300-000 [ 14.270836] igb 0000:05:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 14.270925] xen: registering gsi 17 triggering 0 polarity 1 [ 14.270933] Already setup the GSI :17 [ 14.284358] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 14.284574] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 14.284576] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 14.284577] usb usb2: Product: EHCI Host Controller [ 14.284578] usb usb2: Manufacturer: Linux 4.9.0-1-amd64 ehci_hcd [ 14.284579] usb usb2: SerialNumber: 0000:00:1d.0 [ 14.284782] hub 2-0:1.0: USB hub found [ 14.284792] hub 2-0:1.0: 2 ports detected [ 14.285104] xen: registering gsi 19 triggering 0 polarity 1 [ 14.285111] Already setup the GSI :19 [ 14.285180] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 14.285186] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 14.286311] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 14.286319] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 14.286662] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 14.286664] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 14.286665] usb usb3: Product: xHCI Host Controller [ 14.286666] usb usb3: Manufacturer: Linux 4.9.0-1-amd64 xhci-hcd [ 14.286667] usb usb3: SerialNumber: 0000:00:14.0 [ 14.286899] hub 3-0:1.0: USB hub found [ 14.286962] hub 3-0:1.0: 15 ports detected [ 14.290577] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 14.290580] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 14.290634] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 14.290636] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 14.290637] usb usb4: Product: xHCI Host Controller [ 14.290638] usb usb4: Manufacturer: Linux 4.9.0-1-amd64 xhci-hcd [ 14.290639] usb usb4: SerialNumber: 0000:00:14.0 [ 14.290789] hub 4-0:1.0: USB hub found [ 14.290811] hub 4-0:1.0: 6 ports detected [ 14.292713] ahci 0000:00:11.4: version 3.0 [ 14.292876] xen: registering gsi 16 triggering 0 polarity 1 [ 14.292889] Already setup the GSI :16 [ 14.293108] ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 14.293110] ahci 0000:00:11.4: flags: 64bit ncq pm led clo pio slum part ems apst [ 14.301062] pps pps1: new PPS source ptp1 [ 14.301064] igb 0000:06:00.0: added PHC on eth1 [ 14.301065] igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection [ 14.301066] igb 0000:06:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 34:97:f6:5c:0a:20 [ 14.301127] igb 0000:06:00.0: eth1: PBA No: 001300-000 [ 14.301128] igb 0000:06:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 14.302356] igb 0000:05:00.0 rename2: renamed from eth0 [ 14.333011] scsi host0: ahci [ 14.333149] scsi host1: ahci [ 14.333268] scsi host2: ahci [ 14.333386] scsi host3: ahci [ 14.333442] ata1: SATA max UDMA/133 abar m2048@0xc7f18000 port 0xc7f18100 irq 317 [ 14.333444] ata2: SATA max UDMA/133 abar m2048@0xc7f18000 port 0xc7f18180 irq 317 [ 14.333446] ata3: SATA max UDMA/133 abar m2048@0xc7f18000 port 0xc7f18200 irq 317 [ 14.333447] ata4: SATA max UDMA/133 abar m2048@0xc7f18000 port 0xc7f18280 irq 317 [ 14.333559] xen: registering gsi 19 triggering 0 polarity 1 [ 14.333565] Already setup the GSI :19 [ 14.333742] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 14.333744] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 14.336521] igb 0000:06:00.0 eth2: renamed from eth1 [ 14.386671] igb 0000:05:00.0 eth1: renamed from rename2 [ 14.393097] scsi host4: ahci [ 14.393263] scsi host5: ahci [ 14.393390] scsi host6: ahci [ 14.393510] scsi host7: ahci [ 14.393634] scsi host8: ahci [ 14.393762] scsi host9: ahci [ 14.393816] ata5: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12100 irq 318 [ 14.393818] ata6: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12180 irq 318 [ 14.393819] ata7: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12200 irq 318 [ 14.393821] ata8: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12280 irq 318 [ 14.393822] ata9: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12300 irq 318 [ 14.393824] ata10: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12380 irq 318 [ 14.592386] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 14.612383] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 14.616386] usb 3-4: new full-speed USB device number 2 using xhci_hcd [ 14.648122] ata3: SATA link down (SStatus 0 SControl 300) [ 14.648143] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 14.648164] ata4: SATA link down (SStatus 0 SControl 300) [ 14.648187] ata2: SATA link down (SStatus 0 SControl 300) [ 14.651652] ata1.00: ATA-6: WDC WD740GD-00FLC0, 33.08F33, max UDMA/133 [ 14.651655] ata1.00: 145226112 sectors, multi 16: LBA48 [ 14.656213] ata1.00: configured for UDMA/133 [ 14.656701] scsi 0:0:0:0: Direct-Access ATA WDC WD740GD-00FL 8F33 PQ: 0 ANSI: 5 [ 14.708024] ata10: SATA link down (SStatus 0 SControl 300) [ 14.708046] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 14.708072] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 14.708087] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 14.708105] ata9: SATA link down (SStatus 0 SControl 300) [ 14.708645] ata6.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 14.708647] ata6.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 14.708671] ata5.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 14.708672] ata5.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 14.708680] ata7.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 14.708681] ata7.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 14.709383] ata7.00: configured for UDMA/133 [ 14.709399] ata6.00: configured for UDMA/133 [ 14.709411] ata5.00: configured for UDMA/133 [ 14.709814] scsi 4:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 14.735828] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 14.736471] ata8.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 14.736472] ata8.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 14.737093] ata8.00: configured for UDMA/133 [ 14.740704] usb 1-1: New USB device found, idVendor=8087, idProduct=800a [ 14.740705] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 14.741008] hub 1-1:1.0: USB hub found [ 14.741078] hub 1-1:1.0: 6 ports detected [ 14.753067] scsi 5:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 14.760729] usb 2-1: New USB device found, idVendor=8087, idProduct=8002 [ 14.760730] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 14.761134] hub 2-1:1.0: USB hub found [ 14.761235] hub 2-1:1.0: 8 ports detected [ 14.762856] usb 3-4: New USB device found, idVendor=046d, idProduct=c52b [ 14.762858] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 14.762859] usb 3-4: Product: USB Receiver [ 14.762860] usb 3-4: Manufacturer: Logitech [ 14.767122] hidraw: raw HID events driver (C) Jiri Kosina [ 14.770232] sd 0:0:0:0: [sda] 145226112 512-byte logical blocks: (74.4 GB/69.2 GiB) [ 14.770255] sd 4:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 14.770257] sd 4:0:0:0: [sdb] 4096-byte physical blocks [ 14.770279] sd 4:0:0:0: [sdb] Write Protect is off [ 14.770281] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 14.770290] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.770370] sd 0:0:0:0: [sda] Write Protect is off [ 14.770373] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 14.770407] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.772613] usbcore: registered new interface driver usbhid [ 14.772613] usbhid: USB HID core driver [ 14.775104] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input2 [ 14.785621] sda: sda1 sda2 < sda5 > [ 14.786441] sd 0:0:0:0: [sda] Attached SCSI disk [ 14.808585] sd 5:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 14.808587] sd 5:0:0:0: [sdc] 4096-byte physical blocks [ 14.808736] sd 5:0:0:0: [sdc] Write Protect is off [ 14.808738] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 14.808785] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.808835] scsi 6:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 14.815907] sdb: sdb1 [ 14.816173] sd 4:0:0:0: [sdb] Attached SCSI disk [ 14.852637] sd 6:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 14.852640] sd 6:0:0:0: [sdd] 4096-byte physical blocks [ 14.852680] sd 6:0:0:0: [sdd] Write Protect is off [ 14.852683] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 14.852701] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.852754] sdc: sdc1 [ 14.853030] scsi 7:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 14.853260] sd 5:0:0:0: [sdc] Attached SCSI disk [ 14.892798] sd 7:0:0:0: [sde] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 14.892801] sd 7:0:0:0: [sde] 4096-byte physical blocks [ 14.893046] sd 7:0:0:0: [sde] Write Protect is off [ 14.893049] sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 14.893120] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.895026] sdd: sdd1 [ 14.895287] sd 6:0:0:0: [sdd] Attached SCSI disk [ 14.906610] input: Logitech K520 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:046D:C52B.0003/0003:046D:2011.0005/input/input3 [ 14.906803] logitech-hidpp-device 0003:046D:2011.0005: input,hidraw1: USB HID v1.11 Keyboard [Logitech K520] on usb-0000:00:14.0-4:2 [ 14.937749] sde: sde1 [ 14.938311] sd 7:0:0:0: [sde] Attached SCSI disk [ 14.948363] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e334b15438, max_idle_ns: 440795295737 ns [ 15.041284] md: bind<sdc1> [ 15.086032] md: bind<sdd1> [ 15.089439] md: raid1 personality registered for level 1 [ 15.090227] md/raid1:md127: active with 2 out of 2 mirrors [ 15.090337] created bitmap (22 pages) for device md127 [ 15.090822] md127: bitmap initialized from disk: read 2 pages, set 0 of 44709 bits [ 15.106142] md: bind<sdb1> [ 15.112842] md: bind<sde1> [ 15.115263] md/raid1:md0: active with 2 out of 2 mirrors [ 15.115371] created bitmap (22 pages) for device md0 [ 15.115950] md0: bitmap initialized from disk: read 2 pages, set 0 of 44709 bits [ 15.156338] md127: detected capacity change from 0 to 3000312528896 [ 15.186542] md0: detected capacity change from 0 to 3000312528896 [ 15.460610] device-mapper: uevent: version 1.0.3 [ 15.460793] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 15.972786] clocksource: Switched to clocksource tsc [ 19.942561] input: Logitech M310/M310t as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:046D:C52B.0003/0003:046D:4031.0004/input/input4 [ 19.942874] logitech-hidpp-device 0003:046D:4031.0004: input,hidraw2: USB HID v1.11 Mouse [Logitech M310/M310t] on usb-0000:00:14.0-4:1 [ 19.953366] md: linear personality registered for level -1 [ 19.957809] md: multipath personality registered for level -4 [ 19.962381] md: raid0 personality registered for level 0 [ 20.040349] raid6: sse2x1 gen() 6861 MB/s [ 20.108364] raid6: sse2x1 xor() 4990 MB/s [ 20.176353] raid6: sse2x2 gen() 8432 MB/s [ 20.244352] raid6: sse2x2 xor() 5592 MB/s [ 20.312354] raid6: sse2x4 gen() 9820 MB/s [ 20.380342] raid6: sse2x4 xor() 6808 MB/s [ 20.448343] raid6: avx2x1 gen() 13290 MB/s [ 20.516353] raid6: avx2x2 gen() 15566 MB/s [ 20.584333] raid6: avx2x4 gen() 17733 MB/s [ 20.584334] raid6: using algorithm avx2x4 gen() 17733 MB/s [ 20.584335] raid6: using avx2x2 recovery algorithm [ 20.585424] xor: automatically using best checksumming function avx [ 20.586472] async_tx: api initialized (async) [ 20.593690] md: raid6 personality registered for level 6 [ 20.593691] md: raid5 personality registered for level 5 [ 20.593692] md: raid4 personality registered for level 4 [ 20.604629] md: raid10 personality registered for level 10 [ 20.636267] PM: Starting manual resume from disk [ 20.636270] PM: Hibernation image partition 253:5 present [ 20.636270] PM: Looking for hibernation image. [ 20.636541] PM: Image not found (code -22) [ 20.636542] PM: Hibernation image not present or could not be loaded. [ 20.823225] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 22.668345] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 22.668351] ACPI: Power Button [PWRB] [ 22.668404] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 22.668406] ACPI: Power Button [PWRF] [ 22.820999] power_meter ACPI000D:00: Found ACPI power meter. [ 22.821025] power_meter ACPI000D:00: Ignoring unsafe software power cap! [ 22.821649] wmi: Mapper loaded [ 22.893934] ipmi message handler version 39.2 [ 22.893966] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 22.897731] ipmi_si IPI0001:00: ipmi_si: probing via ACPI [ 22.897748] ipmi_si IPI0001:00: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 22.897749] ipmi_si: Adding ACPI-specified kcs state machine [ 22.897769] IPMI System Interface driver. [ 22.897820] ipmi_si: probing via SMBIOS [ 22.897822] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 22.897822] ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface [ 22.897824] ipmi_si: probing via SPMI [ 22.897826] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0 [ 22.897827] ipmi_si: Adding SPMI-specified kcs state machine duplicate interface [ 22.897828] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 23.129458] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 23.129504] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 23.129564] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 23.129631] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 23.129696] sd 7:0:0:0: Attached scsi generic sg4 type 0 [ 23.211398] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 23.211399] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 23.211400] RAPL PMU: hw unit of domain package 2^-14 Joules [ 23.211400] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 23.211401] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 23.217935] ipmi_si IPI0001:00: Found new BMC (man_id: 0x000a3f, prod_id: 0x0e73, dev_id: 0x20) [ 23.217948] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 23.308286] iTCO_vendor_support: vendor-support=0 [ 23.310031] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 23.310073] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 23.322418] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 23.434221] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 23.567668] xen: registering gsi 36 triggering 0 polarity 1 [ 23.567714] xen: --> pirq=36 -> irq=36 (gsi=36) [ 23.567785] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client [ 23.567786] snd_hda_intel 0000:02:00.1: Force to non-snoop mode [ 23.613566] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card0/input8 [ 23.613689] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card0/input9 [ 23.613788] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card0/input10 [ 23.613865] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card0/input11 [ 23.613946] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card0/input12 [ 24.006388] EDAC MC: Ver: 3.0.0 [ 24.042087] EDAC sbridge: Seeking for: PCI ID 8086:6fa0 [ 24.042105] EDAC sbridge: Seeking for: PCI ID 8086:6fa0 [ 24.042119] EDAC sbridge: Seeking for: PCI ID 8086:6fa0 [ 24.042127] EDAC sbridge: Seeking for: PCI ID 8086:6ffc [ 24.042134] EDAC sbridge: Seeking for: PCI ID 8086:6ffc [ 24.042145] EDAC sbridge: Seeking for: PCI ID 8086:6ffc [ 24.042150] EDAC sbridge: Seeking for: PCI ID 8086:6ffd [ 24.042157] EDAC sbridge: Seeking for: PCI ID 8086:6ffd [ 24.042167] EDAC sbridge: Seeking for: PCI ID 8086:6ffd [ 24.042174] EDAC sbridge: Seeking for: PCI ID 8086:6f60 [ 24.042186] EDAC sbridge: Seeking for: PCI ID 8086:6fa8 [ 24.042198] EDAC sbridge: Seeking for: PCI ID 8086:6fa8 [ 24.042210] EDAC sbridge: Seeking for: PCI ID 8086:6fa8 [ 24.042216] EDAC sbridge: Seeking for: PCI ID 8086:6f71 [ 24.042224] EDAC sbridge: Seeking for: PCI ID 8086:6f71 [ 24.042235] EDAC sbridge: Seeking for: PCI ID 8086:6f71 [ 24.042240] EDAC sbridge: Seeking for: PCI ID 8086:6faa [ 24.042248] EDAC sbridge: Seeking for: PCI ID 8086:6faa [ 24.042261] EDAC sbridge: Seeking for: PCI ID 8086:6faa [ 24.042267] EDAC sbridge: Seeking for: PCI ID 8086:6fab [ 24.042279] EDAC sbridge: Seeking for: PCI ID 8086:6fab [ 24.042290] EDAC sbridge: Seeking for: PCI ID 8086:6fab [ 24.042295] EDAC sbridge: Seeking for: PCI ID 8086:6fac [ 24.042303] EDAC sbridge: Seeking for: PCI ID 8086:6fac [ 24.042313] EDAC sbridge: Seeking for: PCI ID 8086:6fac [ 24.042318] EDAC sbridge: Seeking for: PCI ID 8086:6fad [ 24.042327] EDAC sbridge: Seeking for: PCI ID 8086:6fad [ 24.042337] EDAC sbridge: Seeking for: PCI ID 8086:6fad [ 24.042342] EDAC sbridge: Seeking for: PCI ID 8086:6faf [ 24.042354] EDAC sbridge: Seeking for: PCI ID 8086:6faf [ 24.042365] EDAC sbridge: Seeking for: PCI ID 8086:6faf [ 24.042370] EDAC sbridge: Seeking for: PCI ID 8086:6f68 [ 24.042380] EDAC sbridge: Seeking for: PCI ID 8086:6f68 [ 24.042390] EDAC sbridge: Seeking for: PCI ID 8086:6f68 [ 24.042394] EDAC sbridge: Seeking for: PCI ID 8086:6f79 [ 24.042405] EDAC sbridge: Seeking for: PCI ID 8086:6f6a [ 24.042416] EDAC sbridge: Seeking for: PCI ID 8086:6f6b [ 24.042427] EDAC sbridge: Seeking for: PCI ID 8086:6f6c [ 24.042438] EDAC sbridge: Seeking for: PCI ID 8086:6f6d [ 24.042769] EDAC MC0: Giving out device to module sbridge_edac.c controller Broadwell Socket#0: DEV 0000:ff:12.0 (INTERRUPT) [ 24.043116] EDAC MC1: Giving out device to module sbridge_edac.c controller Broadwell Socket#1: DEV 0000:7f:12.0 (INTERRUPT) [ 24.043117] EDAC sbridge: Ver: 1.1.1 [ 24.061428] intel_rapl: Found RAPL domain package [ 24.061453] intel_rapl: Found RAPL domain dram [ 24.061454] intel_rapl: DRAM domain energy unit 15300pj [ 24.061518] intel_rapl: Found RAPL domain package [ 24.061547] intel_rapl: Found RAPL domain dram [ 24.061549] intel_rapl: DRAM domain energy unit 15300pj [ 25.438702] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 25.728748] Adding 4247548k swap on /dev/mapper/vgsys-lvswap. Priority:-1 extents:1 across:4247548k FS [ 26.176436] lp: driver loaded but no devices found [ 26.191961] ppdev: user-space parallel port driver [ 26.218587] parport_pc parport_pc.956: Unable to set coherent dma mask: disabling DMA [ 26.218745] parport_pc parport_pc.888: Unable to set coherent dma mask: disabling DMA [ 26.218904] parport_pc parport_pc.632: Unable to set coherent dma mask: disabling DMA [ 26.248922] loop: module loaded [ 26.279297] pciback 0000:02:00.0: seizing device [ 26.279460] xen: registering gsi 32 triggering 0 polarity 1 [ 26.279484] Already setup the GSI :32 [ 26.279689] xen_pciback: backend is vpci [ 26.331236] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 26.411308] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 27.051164] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 27.056323] xenbr0: port 1(eth1) entered blocking state [ 27.056325] xenbr0: port 1(eth1) entered disabled state [ 27.056400] device eth1 entered promiscuous mode [ 27.099554] igb 0000:05:00.0 eth1: igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 27.102327] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready [ 28.068408] xenbr0: port 1(eth1) entered blocking state [ 28.068410] xenbr0: port 1(eth1) entered forwarding state [ 28.068632] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready [ 35.992871] RPC: Registered named UNIX socket transport module. [ 35.992873] RPC: Registered udp transport module. [ 35.992873] RPC: Registered tcp transport module. [ 35.992874] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 36.027084] FS-Cache: Loaded [ 36.062931] FS-Cache: Netfs 'nfs' registered for caching [ 36.103626] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 41.704765] xen:xen_evtchn: Event-channel device installed
Attachment:
signature.asc
Description: This is a digitally signed message part.