Bug#853170: fails to boot on debian's MP30-AR1 systems [regression]
As requested, boot log of working kernel:
[...]
] *** SmbiosDynamicUpdate Entry ***
] *** SMBIOS - AddUpdateType13 ***
] *** SMBIOS - WriteStructureByHandle ***
] *** SMBIOS - UpdateSmbiosTableHeader ***
] *** SMBIOS 3.0 - TableAddress = 000000807d93d000 ***
] ::: SMBIOS - Exit UpdateEPSHeader_3 :::
] ::: SMBIOS - Exit UpdateSmbiosTableHeader :::
] ::: SMBIOS - Exit WriteStructureByHandle :::
] ::: SMBIOS - Exit AddUpdateType13 :::
] *** Before DynamicUpdateStructures (SMBIOS_DYNAMIC_UPDATE_POLICY = 0) ***
] *** SMBIOS - DynamicUpdateStructures ***
] *** SMBIOS - DynamicUpdateSlotsData ***
] ::: SMBIOS - Exit DynamicUpdateSlotsData :::
] *** SMBIOS - DynamicUpdateOnboardDevData ***
] ::: SMBIOS - Exit DynamicUpdateOnboardDevData :::
] *** SMBIOS - DynamicUpdateMemoryData ***
] Updating memory slots
] Searching for slot 1 structure
] Loading Linux 4.9.0-1-arm64 ...
] Loading initial ramdisk ...
] Loading driver at 0x08078ABC000 EntryPoint=0x08079380630
] EFI stub: Booting Linux Kernel...
] ConvertPages: Incompatible memory types
] EFI stub: EFI_RNG_PROTOCOL unavailable, no randomness supplied
] EFI stub: Using DTB from configuration table
] EFI stub: Exiting boot services and installing virtual address map...
] OSBootEvent = Success
] L3c Cache: 8MB
] [ 0.000000] Booting Linux on physical CPU 0x0
] [ 0.000000] Linux version 4.9.0-1-arm64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20161229 (Debian 6.3.0-2) ) #1 SMP Debian 4.9.2-2 (2017-01-12)
] [ 0.000000] Boot CPU: AArch64 Processor [500f0001]
] [ 0.000000] efi: Getting EFI parameters from FDT:
] [ 0.000000] efi: EFI v2.40 by American Megatrends
] [ 0.000000] efi: ACPI 2.0=0x807ff43000 ESRT=0x807e161e18 SMBIOS 3.0=0x807e161c18
] [ 0.000000] esrt: Reserving ESRT space from 0x000000807e161e18 to 0x000000807e161e50.
] [ 0.000000] percpu: Embedded 22 pages/cpu @ffff807fffe93000 s50200 r8192 d31720 u90112
] [ 0.000000] Detected PIPT I-cache on CPU0
] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16515072
] [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-1-arm64 root=UUID=2cf290a8-9f94-42fd-a141-86c7e96dae7f ro console=ttyS0,115200 earlycon
] [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
] [ 0.000000] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
] [ 0.000000] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
] [ 0.000000] software IO TLB [mem 0xfbfec000-0xfffec000] (64MB) mapped at [ffff80007bfec000-ffff80007ffebfff]
] [ 0.000000] Memory: 65832944K/67108864K available (6780K kernel code, 1020K rwdata, 2164K rodata, 3264K init, 634K bss, 1275920K reserved, 0K cma-reserved)
] [ 0.000000] Virtual kernel memory layout:
] [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
] [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
] [ 0.000000] .text : 0xffff000008080000 - 0xffff000008720000 ( 6784 KB)
] [ 0.000000] .rodata : 0xffff000008720000 - 0xffff000008940000 ( 2176 KB)
] [ 0.000000] .init : 0xffff000008940000 - 0xffff000008c70000 ( 3264 KB)
] [ 0.000000] .data : 0xffff000008c70000 - 0xffff000008d6f200 ( 1021 KB)
] [ 0.000000] .bss : 0xffff000008d6f200 - 0xffff000008e0dbb4 ( 635 KB)
] [ 0.000000] fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB)
] [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
] [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
] [ 0.000000] 0xffff7e0000000000 - 0xffff7e0200000000 ( 8192 MB actual)
] [ 0.000000] memory : 0xffff800000000000 - 0xffff808000000000 (524288 MB)
] [ 0.000000] Hierarchical RCU implementation.
] [ 0.000000] Build-time adjustment of leaf fanout to 64.
] [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
] [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
] [ 0.000000] NR_IRQS:64 nr_irqs:64 0
] [ 0.000000] GIC: Adjusting CPU interface base to 0x00000000780af000
] [ 0.000000] GIC: Using split EOI/Deactivate mode
] [ 0.000000] GIC: PPI0 is secure or misconfigured
] [ 0.000000] GIC: PPI13 is secure or misconfigured
] [ 0.000000] arm_arch_timer: WARNING: Invalid trigger for IRQ2, assuming level low
] [ 0.000000] arm_arch_timer: WARNING: Please fix your firmware
] [ 0.000000] arm_arch_timer: WARNING: Invalid trigger for IRQ3, assuming level low
] [ 0.000000] arm_arch_timer: WARNING: Please fix your firmware
] [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
] [ 0.000002] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
] [ 0.000211] Console: colour dummy device 80x25
] [ 0.000227] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
] [ 0.000232] pid_max: default: 32768 minimum: 301
] [ 0.000311] Security Framework initialized
] [ 0.000317] Yama: disabled by default; enable with sysctl kernel.yama.*
] [ 0.000329] AppArmor: AppArmor disabled by boot time parameter
] [ 0.000358] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
] [ 0.000365] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
] [ 0.001003] ftrace: allocating 24669 entries in 97 pages
] [ 0.020844] ASID allocator initialised with 65536 entries
] [ 0.021720] Remapping and enabling EFI services.
] [ 0.021736] EFI remap 0x0000000010510000 => 0000000020000000
] [ 0.021740] EFI remap 0x0000000010540000 => 0000000020010000
] [ 0.021743] EFI remap 0x0000000017000000 => 0000000020020000
] [ 0.021746] EFI remap 0x000000001c020000 => 0000000020030000
] [ 0.021748] EFI remap 0x000000001c025000 => 0000000020045000
] [ 0.021763] EFI remap 0x0000000082000000 => 0000000020200000
] [ 0.021766] EFI remap 0x00000000fffed000 => 0000000020f0d000
] [ 0.021771] EFI remap 0x000000807cb8e000 => 0000000020f2e000
] [ 0.021774] EFI remap 0x000000807cfa8000 => 0000000021178000
] [ 0.021776] EFI remap 0x000000807d306000 => 0000000021186000
] [ 0.021781] EFI remap 0x000000807d3cc000 => 000000002119c000
] [ 0.021783] EFI remap 0x000000807d8f6000 => 00000000213e6000
] [ 0.021787] EFI remap 0x000000807d8f9000 => 00000000213e9000
] [ 0.021790] EFI remap 0x000000807d914000 => 0000000021404000
] [ 0.021792] EFI remap 0x000000807d91b000 => 000000002140b000
] [ 0.021795] EFI remap 0x000000807d93b000 => 000000002142b000
] [ 0.021808] EFI remap 0x000000807d93f000 => 000000002142f000
] [ 0.021810] EFI remap 0x000000807e144000 => 0000000021c34000
] [ 0.021813] EFI remap 0x000000807e146000 => 0000000021c36000
] [ 0.021816] EFI remap 0x000000807e15f000 => 0000000021c4f000
] [ 0.021818] EFI remap 0x000000807e165000 => 0000000021c55000
] [ 0.021821] EFI remap 0x000000807e175000 => 0000000021c65000
] [ 0.021824] EFI remap 0x000000807e185000 => 0000000021c75000
] [ 0.021826] EFI remap 0x000000807e1b2000 => 0000000021ca2000
] [ 0.021829] EFI remap 0x000000807e1b5000 => 0000000021ca5000
] [ 0.021831] EFI remap 0x000000807e1d2000 => 0000000021cc2000
] [ 0.021834] EFI remap 0x000000807e1d3000 => 0000000021cc3000
] [ 0.021837] EFI remap 0x000000807e24f000 => 0000000021d3f000
] [ 0.021841] EFI remap 0x000000807e2e1000 => 0000000021dd1000
] [ 0.021844] EFI remap 0x000000807ffaf000 => 0000000021f0f000
] [ 0.021846] EFI remap 0x000000807ffcf000 => 0000000021f2f000
] [ 0.022213] Detected PIPT I-cache on CPU1
] [ 0.022240] CPU1: Booted secondary processor [500f0001]
] [ 0.022464] Detected PIPT I-cache on CPU2
] [ 0.022484] CPU2: Booted secondary processor [500f0001]
] [ 0.022692] Detected PIPT I-cache on CPU3
] [ 0.022704] CPU3: Booted secondary processor [500f0001]
] [ 0.022905] Detected PIPT I-cache on CPU4
] [ 0.022924] CPU4: Booted secondary processor [500f0001]
] [ 0.023126] Detected PIPT I-cache on CPU5
] [ 0.023138] CPU5: Booted secondary processor [500f0001]
] [ 0.023335] Detected PIPT I-cache on CPU6
] [ 0.023355] CPU6: Booted secondary processor [500f0001]
] [ 0.023559] Detected PIPT I-cache on CPU7
] [ 0.023571] CPU7: Booted secondary processor [500f0001]
] [ 0.023601] Brought up 8 CPUs
] [ 0.023615] SMP: Total of 8 processors activated.
] [ 0.023619] CPU features: detected feature: 32-bit EL0 Support
] [ 0.023624] CPU: All CPU(s) started at EL2
] [ 0.029988] devtmpfs: initialized
] [ 0.031874] SMBIOS 3.0.0 present.
] [ 0.031976] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
] [ 0.032042] pinctrl core: initialized pinctrl subsystem
] [ 0.032443] NET: Registered protocol family 16
] [ 0.044746] cpuidle: using governor ladder
] [ 0.060753] cpuidle: using governor menu
] [ 0.060777] vdso: 2 pages (1 code @ ffff000008727000, 1 data @ ffff000008c75000)
] [ 0.060783] hw-breakpoint: found 4 breakpoint and 4 watchpoint registers.
] [ 0.060903] DMA: preallocated 256 KiB pool for atomic allocations
] [ 0.060969] Serial: AMBA PL011 UART driver
] [ 0.061096] irq: type mismatch, failed to map hwirq-16 for /interrupt-controller@78010000!
] [ 0.080961] HugeTLB registered 2 MB page size, pre-allocated 0 pages
] [ 0.081488] xgene-msi 79000000.msi: APM X-Gene PCIe MSI driver loaded
] [ 0.081531] ACPI: Interpreter disabled.
] [ 0.081669] vgaarb: loaded
] [ 0.081769] Registered efivars operations
] [ 0.081798] ------------[ cut here ]------------
] [ 0.081810] WARNING: CPU: 0 PID: 1 at /build/linux-fd_naX/linux-4.9.2/drivers/firmware/efi/runtime-wrappers.c:43 efi_call_virt_check_flags+0x8c/0xb8
] [ 0.081812] Modules linked in:
] [ 0.081815]
] [ 0.081820] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-1-arm64 #1 Debian 4.9.2-2
] [ 0.081822] Hardware name: GIGABYTE R120-P31/MP30-AR1, BIOS D7b 08/26/2016
] [ 0.081824] task: ffff807ffd654d80 task.stack: ffff807ffd658000
] [ 0.081828] PC is at efi_call_virt_check_flags+0x8c/0xb8
] [ 0.081831] LR is at virt_efi_get_next_variable+0xa4/0xd0
] [ 0.081833] pc : [<ffff0000085c3c2c>] lr : [<ffff0000085c4404>] pstate: 00000005
] [ 0.081835] sp : ffff807ffd65bc20
] [ 0.081837] x29: ffff807ffd65bc20 x28: 0000000000000000
] [ 0.081840] x27: ffff0000089d9af8 x26: ffff000008d47000
] [ 0.081843] x25: 0000000000000000 x24: 0000000000000001
] [ 0.081846] x23: 0000000000000040 x22: ffff807ffd65bd08
] [ 0.081849] x21: ffff0000088c1080 x20: 0000000000000000
] [ 0.081851] x19: 0000000000000040 x18: ffffffffffffffff
] [ 0.081854] x17: 0000000000000000 x16: 00000000835c5b79
] [ 0.081856] x15: ffff000008c78288 x14: ffff000088d7ce7f
] [ 0.081859] x13: ffff000008d7ce8d x12: 0000000000000081
] [ 0.081861] x11: 0000000000000006 x10: 0000000000000082
] [ 0.081863] x9 : 0000000000000000 x8 : ffff807fb66adc00
] [ 0.081866] x7 : 0000000000000000 x6 : 0000000000000001
] [ 0.081869] x5 : 0000000021dfef98 x4 : 0000000021dfefa0
] [ 0.081871] x3 : ffff807ffd65bd08 x2 : 0000000000000010
] [ 0.081874] x1 : 0000000000000001 x0 : ffff000008d48000
] [ 0.081876]
] [ 0.081879] ---[ end trace 5025ed84a8272e5e ]---
] [ 0.081882] Call trace:
] [ 0.081885] Exception stack(0xffff807ffd65ba30 to 0xffff807ffd65bb60)
] [ 0.081887] ba20: 0000000000000040 0001000000000000
] [ 0.081890] ba40: ffff807ffd65bc20 ffff0000085c3c2c 0000000000000005 ffff807ffd65bd08
] [ 0.081893] ba60: ffff807ffd65ba90 0000000021dda040 ffff807ffd65baa0 0000000021d3f4c3
] [ 0.081895] ba80: ffff807ffd65bab0 0000000021de8758 ffff807ffd65bac0 0000000000000010
] [ 0.081898] baa0: 0000000021dbeff8 ffff807ffd65bd08 ffff807ffd65bae0 0000000021ddad40
] [ 0.081900] bac0: ffff807ffd65bae0 0000000000000010 0000000021dbeff8 ffff807ffd65bd08
] [ 0.081902] bae0: ffff807ffd65bb50 0000000000040902 ffff000008d48000 0000000000000001
] [ 0.081905] bb00: 0000000000000010 ffff807ffd65bd08 0000000021dfefa0 0000000021dfef98
] [ 0.081908] bb20: 0000000000000001 0000000000000000 ffff807fb66adc00 0000000000000000
] [ 0.081910] bb40: 0000000000000082 0000000000000006 0000000000000081 ffff000008d7ce8d
] [ 0.081913] [<ffff0000085c3c2c>] efi_call_virt_check_flags+0x8c/0xb8
] [ 0.081917] [<ffff0000085c4404>] virt_efi_get_next_variable+0xa4/0xd0
] [ 0.081920] [<ffff0000085c1f94>] efivar_init+0xa4/0x360
] [ 0.081925] [<ffff00000898289c>] efisubsys_init+0xf8/0x280
] [ 0.081929] [<ffff00000808395c>] do_one_initcall+0x5c/0x170
] [ 0.081933] [<ffff000008940dcc>] kernel_init_freeable+0x1ac/0x250
] [ 0.081937] [<ffff00000870b550>] kernel_init+0x18/0x108
] [ 0.081940] [<ffff000008083680>] ret_from_fork+0x10/0x50
] [ 0.081942] Disabling lock debugging due to kernel taint
] [ 0.081945] efi: [Firmware Bug]: IRQ flags corrupted (0x00000040=>0x00000000) by EFI get_next_variable
] [ 0.081953] efi: [Firmware Bug]: IRQ flags corrupted (0x00000040=>0x00000000) by EFI get_next_variable
] [ 0.081960] efi: [Firmware Bug]: IRQ flags corrupted (0x00000040=>0x00000000) by EFI get_next_variable
] [ 0.081964] efi: [Firmware Bug]: IRQ flags corrupted (0x00000040=>0x00000000) by EFI get_next_variable
] [ 0.081969] efi: [Firmware Bug]: IRQ flags corrupted (0x00000040=>0x00000000) by EFI get_next_variable
] [ 0.081978] efi: [Firmware Bug]: IRQ flags corrupted (0x00000040=>0x00000000) by EFI get_next_variable
] [ 0.081983] efi: [Firmware Bug]: IRQ flags corrupted (0x00000040=>0x00000000) by EFI get_next_variable
] [ 0.081987] efi: [Firmware Bug]: IRQ flags corrupted (0x00000040=>0x00000000) by EFI get_next_variable
] [ 0.081991] efi: [Firmware Bug]: IRQ flags corrupted (0x00000040=>0x00000000) by EFI get_next_variable
] [ 0.081996] efi: [Firmware Bug]: IRQ flags corrupted (0x00000040=>0x00000000) by EFI get_next_variable
] [ 0.082778] clocksource: Switched to clocksource arch_sys_counter
] [ 0.096200] VFS: Disk quotas dquot_6.6.0
] [ 0.096240] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
] [ 0.096342] pnp: PnP ACPI: disabled
] [ 0.099526] NET: Registered protocol family 2
] [ 0.099811] TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
] [ 0.101136] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
] [ 0.101503] TCP: Hash tables configured (established 524288 bind 65536)
] [ 0.101537] UDP hash table entries: 32768 (order: 8, 1048576 bytes)
] [ 0.102074] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
] [ 0.102712] NET: Registered protocol family 1
] [ 0.102864] Unpacking initramfs...
] [ 0.528981] Freeing initrd memory: 18500K (ffff807ff9856000 - ffff807ffaa67000)
] [ 0.529203] hw perfevents: enabled with armv8_pmuv3 PMU driver, 5 counters available
] [ 0.529313] kvm [1]: 8-bit VMID
] [ 0.529316] kvm [1]: IDMAP page: 80715000
] [ 0.529318] kvm [1]: HYP VA range: 800000000000:ffffffffffff
] [ 0.529564] kvm [1]: Hyp mode initialized successfully
] [ 0.529592] kvm [1]: vgic-v2@780c0000
] [ 0.529701] kvm [1]: vgic interrupt IRQ1
] [ 0.529706] kvm [1]: Invalid trigger for IRQ4, assuming level low
] [ 0.529712] GIC: PPI14 is secure or misconfigured
] [ 0.529727] kvm [1]: virtual timer IRQ4
] [ 0.530481] futex hash table entries: 2048 (order: 6, 262144 bytes)
] [ 0.530534] audit: initializing netlink subsys (disabled)
] [ 0.530571] audit: type=2000 audit(0.512:1): initialized
] [ 0.530804] Initialise system trusted keyrings
] [ 0.530958] workingset: timestamp_bits=46 max_order=24 bucket_order=0
] [ 0.531058] zbud: loaded
] [ 0.604675] Key type asymmetric registered
] [ 0.604680] Asymmetric key parser 'x509' registered
] [ 0.604714] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
] [ 0.604762] io scheduler noop registered
] [ 0.604764] io scheduler deadline registered
] [ 0.604775] io scheduler cfq registered (default)
] [ 0.605411] OF: PCI: host bridge /soc/pcie@1f2b0000 ranges:
] [ 0.605417] OF: PCI: No bus range found for /soc/pcie@1f2b0000, using [bus 00-ff]
] [ 0.605428] OF: PCI: IO 0xe010000000..0xe01000ffff -> 0x00000000
] [ 0.605434] OF: PCI: MEM 0xe180000000..0xe1ffffffff -> 0x80000000
] [ 0.605438] OF: PCI: MEM 0xf000000000..0xffffffffff -> 0xf000000000
] [ 0.605471] xgene-pcie 1f2b0000.pcie: (rc) link down
] [ 0.605542] xgene-pcie 1f2b0000.pcie: PCI host bridge to bus 0000:00
] [ 0.605547] pci_bus 0000:00: root bus resource [bus 00-ff]
] [ 0.605551] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
] [ 0.605555] pci_bus 0000:00: root bus resource [mem 0xe180000000-0xe1ffffffff] (bus address [0x80000000-0xffffffff])
] [ 0.605558] pci_bus 0000:00: root bus resource [mem 0xf000000000-0xffffffffff pref]
] [ 0.605824] pci 0000:00:00.0: PCI bridie@1f2d0000, using [bus 00-ff]
] [ 0.606115] OF: PCI: IO 0x9010000000..0x901000ffff -> 0x00000000
] [ 0.606120] OF: PCI: MEM 0x9180000000..0x91ffffffff -> 0x80000000
] [ 0.606124] OF: PCI: MEM 0x9400000000..0x97ffffffff -> 0x9400000000
] [ 0.606154] xgene-pcie 1f2d0000.pcie: (rc) x1 gen-1 link up
] [ 0.606215] xgene-pcie 1f2d0000.pcie: PCI host bridge to bus 0001:00
] [ 0.606219] pci_bus 0001:00: root bus resource [bus 00-ff]
] [ 0.606223] pci_bus 0001:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff])
] [ 0.606226] pci_bus 0001:00: root bus resource [mem 0x9180000000-0x91ffffffff] (bus address [0x80000000-0xffffffff])
] [ 0.606229] pci_bus 0001:00: root bus resource [mem 0x9400000000-0x97ffffffff pref]
] [ 0.606752] pci 0001:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
] [ 0.607209] vgaarb: device added: PCI:0001:02:00.0,decodes=io+mem,owns=none,locks=none
] [ 0.607350] pci 0001:00:00.0: BAR 14: assigned [mem 0x9180000000-0x91817fffff]
] [ 0.607354] pci 0001:00:00.0: BAR 13: assigned [io 0x10000-0x10fff]
] [ 0.607358] pci 0001:01:00.0: BAR 14: assigned [mem 0x9180000000-0x91817fffff]
] [ 0.607361] pci 0001:01:00.0: BAR 13: assigned [io 0x10000-0x10fff]
] [ 0.607365] pci 0001:02:00.0: BAR 0: assigned [mem 0x9180000000-0x9180ffffff]
] [ 0.607374] pci 0001:02:00.0: BAR 1: assigned [mem 0x9181000000-0x918101ffff]
] [ 0.607382] pci 0001:02:00.0: BAR 2: assigned [io 0x10000-0x1007f]
] [ 0.607390] pci 0001:01:00.0: PCI bridge to [bus 02]
] [ 0.607395] pci 0001:01:00.0: bridge window [io 0x10000-0x10fff]
] [ 0.607406] pci 0001:01:00.0: bridge window [mem 0x9180000000-0x91817fffff]
] [ 0.607423] pci 0001:00:00.0: PCI bridge to [bus 01-02]
] [ 0.607426] pci 0001:00:00.0: bridge window [io 0x10000-0x10fff]
] [ 0.607433] pci 0001:00:00.0: bridge window [mem 0x9180000000-0x91817fffff]
] [ 0.607551] pcieport 0001:00:00.0: Signaling PME through PCIe PME interrupt
] [ 0.607555] pci 0001:01:00.0: Signaling PME through PCIe PME interrupt
] [ 0.607558] pci 0001:02:00.0: Signaling PME through PCIe PME interrupt
] [ 0.607719] OF: PCI: host bridge /soc/pcie@1f500000 ranges:
] [ 0.607723] OF: PCI: No bus range found for /soc/pcie@1f500000, using [bus 00-ff]
] [ 0.607730] OF: PCI: IO 0xa010000000..0xa01000ffff -> 0x00000000
] [ 0.607735] OF: PCI: MEM 0xa180000000..0xa1ffffffff -> 0x80000000
] [ 0.607739] OF: PCI: MEM 0xb000000000..0xbfffffffff -> 0xb000000000
] [ 0.607772] xgene-pcie 1f500000.pcie: (rc) link down
] [ 0.607831] xgene-pcie 1f500000.pcie: PCI host bridge to bus 0002:00
] [ 0.607835] pci_bus 0002:00: root bus resource [bus 00-ff]
] [ 0.607839] pci_bus 0002:00: root bus resource [io 0x20000-0x2ffff] (bus address [0x0000-0xffff])
] [ 0.607842] pci_bus 0002:00: root bus resource [mem 0xa180000000-0xa1ffffffff] (bus address [0x80000000-0xffffffff])
] [ 0.607845] pci_bus 0002:00: root bus resource [mem 0xb000000000-0xbfffffffff pref]
] [ 0.608078] pci 0002:00:00.0: PCI bridge to [bus 01]
] [ 0.608190] pcieport 0002:00:00.0: Signaling PME through PCIe PME interrupt
] [ 0.609136] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
] [ 0.609772] console [ttyS0] disabled
] [ 0.609802] 1c020000.serial: ttyS0 at MMIO 0x1c020000 (irq = 35, base_baud = 3125000) is a 16550A
] [ 2.292205] console [ttyS0] enabled
] [ 2.295880] 1c021000.serial: ttyS1 at MMIO 0x1c021000 (irq = 36, base_baud = 3125000) is a 16550A
] [ 2.304902] 1c022000.serial: ttyS2 at MMIO 0x1c022000 (irq = 37, base_baud = 3125000) is a 16550A
] [ 2.313906] 1c023000.serial: ttyS3 at MMIO 0x1c023000 (irq = 38, base_baud = 3125000) is a 16550A
] [ 2.322853] Serial: AMBA driver
] [ 2.326045] msm_serial: driver initialized
] [ 2.331252] mousedev: PS/2 mouse device common for all mice
] [ 2.337088] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
] [ 2.343392] xgene-rtc 10510000.rtc: rtc core: registered 10510000.rtc as rtc1
] [ 2.350941] ledtrig-cpu: registered to indicate activity on CPUs
] [ 2.357554] NET: Registered protocol family 10
] [ 2.362322] mip6: Mobile IPv6
] [ 2.365289] NET: Registered protocol family 17
] [ 2.369719] mpls_gso: MPLS GSO support
] [ 2.373701] registered taskstats version 1
] [ 2.377785] Loading compiled-in X.509 certificates
] [ 2.385146] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
] [ 2.392982] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
] [ 2.400474] zswap: loaded using pool lzo/zbud
] [ 2.405319] rtc-efi rtc-efi: setting system clock to 2017-01-30 13:24:12 UTC (1485782652)
] [ 2.414083] Freeing unused kernel memory: 3264K (ffff800000940000 - ffff800000c70000)
] Loading, please wait...
] [ 2.435089] systemd-udevd[119]: starting version 215
] [ 2.440612] random: systemd-udevd: uninitialized urandom read (16 bytes read)
] [ 2.458257] libphy: Fixed MDIO Bus: probed
] [ 2.462980] SCSI subsystem initialized
] [ 2.464716] libphy: APM X-Gene MDIO bus: probed
] [ 2.619343] xgene-enet 1f210030.ethernet: clocks have been setup already
] [ 2.635655] xgene-ahci 1a400000.sata: skip clock and PHY initialization
] [ 2.642272] xgene-ahci 1a400000.sata: controller can't do NCQ, turning off CAP_NCQ
] [ 2.649833] xgene-ahci 1a400000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
] [ 2.658839] xgene-ahci 1a400000.sata: flags: 64bit sntf pm only pmp fbs pio slum part ccc
] [ 2.667070] xgene-ahci 1a400000.sata: port 0 is not capable of FBS
] [ 2.673237] xgene-ahci 1a400000.sata: port 1 is not capable of FBS
] [ 2.679856] scsi host0: xgene-ahci
] [ 2.683424] scsi host1: xgene-ahci
] [ 2.686905] ata1: SATA max UDMA/133 mmio [mem 0x1a400000-0x1a400fff] port 0x100 irq 40
] [ 2.694786] ata2: SATA max UDMA/133 mmio [mem 0x1a400000-0x1a400fff] port 0x180 irq 40
] [ 2.702726] xgene-ahci 1a800000.sata: skip clock and PHY initialization
] [ 2.709324] xgene-ahci 1a800000.sata: controller can't do NCQ, turning off CAP_NCQ
] [ 2.716879] xgene-ahci 1a800000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
] [ 2.725885] xgene-ahci 1a800000.sata: flags: 64bit sntf pm only pmp fbs pio slum part ccc
] [ 2.734114] xgene-ahci 1a800000.sata: port 0 is not capable of FBS
] [ 2.740278] xgene-ahci 1a800000.sata: port 1 is not capable of FBS
] [ 2.746848] scsi host2: xgene-ahci
] [ 2.750387] scsi host3: xgene-ahci
] [ 2.753871] ata3: SATA max UDMA/133 mmio [mem 0x1a800000-0x1a800fff] port 0x100 irq 41
] [ 2.761753] ata4: SATA max UDMA/133 mmio [mem 0x1a800000-0x1a800fff] port 0x180 irq 41
] [ 3.080949] ata3: SATA link down (SStatus 0 SControl 4330)
] [ 3.086431] ata4: SATA link down (SStatus 0 SControl 4330)
] [ 3.338786] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 4300)
] [ 3.345038] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 4300)
] [ 3.351316] ata2.00: supports DRM functions and may not be fully accessible
] [ 3.358255] ata2.00: ATA-9: Samsung SSD 850 PRO 1TB, EXM02B6Q, max UDMA/133
] [ 3.365176] ata2.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 0/32)
] [ 3.371880] ata1.00: supports DRM functions and may not be fully accessible
] [ 3.378812] ata1.00: ATA-9: Samsung SSD 850 PRO 1TB, EXM02B6Q, max UDMA/133
] [ 3.385741] ata1.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 0/32)
] [ 3.392440] ata2.00: supports DRM functions and may not be fully accessible
] [ 3.399377] ata2.00: configured for UDMA/133
] [ 3.403659] ata1.00: supports DRM functions and may not be fully accessible
] [ 3.410593] ata1.00: configured for UDMA/133
] [ 3.415121] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
] [ 3.459230] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
] [ 3.502857] sd 1:0:0:0: [sdb] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB)
] [ 3.502940] sd 0:0:0:0: [sda] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB)
] [ 3.503051] sd 0:0:0:0: [sda] Write Protect is off
] [ 3.503078] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
] [ 3.531997] sd 1:0:0:0: [sdb] Write Protect is off
] [ 3.536810] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
] [ 3.546437] sda: sda1 sda2 sda3
] [ 3.549123] sdb: sdb1 sdb2 sdb3
] [ 3.549708] sd 1:0:0:0: [sdb] Attached SCSI disk
] [ 3.558007] sd 0:0:0:0: [sda] Attached SCSI disk
] [ 3.564709] sd 0:0:0:0: Attached scsi generic sg0 type 0
] [ 3.570079] sd 1:0:0:0: Attached scsi generic sg1 type 0
] Begin: Loading essential drivers ... done.
] Begin: Running /scripts/init-premount ... done.
] Begin: Mounting root file system ... Begin: Running /scripts/local-top ... Begin: Assembling all MD[ 3.613439] md: md2 stopped.
] arrays ... [ 3.618158] md: bind<sdb1>
] [ 3.621243] md: bind<sda1>
] [ 3.626743] md: raid1 personality registered for level 1
] [ 3.632445] md/raid1:md2: active with 2 out of 2 mirrors
] [ 3.637782] md2: detected capacity change from 0 to 999227392
] [ 3.643774] md2:
] mdadm: /dev/md/2 has been started with 2 drives.
] [ 3.656464] md: md0 stopped.
] [ 3.660239] md: bind<sdb2>
] [ 3.660670] random: fast init done
] [ 3.666537] md: bind<sda2>
] [ 3.670463] md/raid1:md0: active with 2 out of 2 mirrors
] [ 3.675803] md0: detected capacity change from 0 to 19982712832
] mdadm: /dev/md/0 has been started with 2 drives.
] [ 3.692810] md: md1 stopped.
] [ 3.696819] md: bind<sdb3>
] [ 3.699737] md: bind<sda3>
] [ 3.703685] md/raid1:md1: active with 2 out of 2 mirrors
] [ 3.709106] created bitmap (8 pages) for device md1
] [ 3.714308] md1: bitmap initialized from disk: read 1 pages, set 0 of 14947 bits
] [ 3.726289] md1: detected capacity change from 0 to 1003075469312
] mdadm: /dev/md/1 has been started with 2 drives.
] Success: assembled all arrays.
] done.
] [ 3.750384] device-mapper: uevent: version 1.0.3
] [ 3.755084] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
] done.
] Begin: Running /scripts/local-premount ... done.
] Begin: Will now check root file system ... fsck from util-linux 2.25.2
] [/sbin/fsck.ext4 (1) -- /dev/md0] fsck.ext4 -a -C0 /dev/md0
] /dev/md0: recovering journal
] /dev/md0: clean, 60038/1220608 files, 932045/4878592 blocks
] done.
] [ 4.061634] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
] done.
] Begin: Running /scripts/local-bottom ... done.
] Begin: Running /scripts/init-bottom ... done.
] [ 4.128977] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
] [ 4.142342] systemd[1]: Detected architecture 'arm64'.
]
] Welcome to Debian GNU/Linux 8 (jessie)!
]
] [ 4.170508] systemd[1]: Inserted module 'autofs4'
] [ 4.175577] systemd[1]: Set hostname to <aagaard>.
] [ 4.204873] systemd-sysv-generator[238]: Overwriting existing symlink /run/systemd/generator.late/ntp.service with real service
] [ 4.259679] systemd[1]: Cannot add dependency job for unit syslog.service, ignoring: Unit syslog.service failed to load: No such file or directory.
] [ 4.272927] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
] [ 4.288316] systemd[1]: Expecting device dev-ttyS0.device...
] Expecting device dev-ttyS0.device...
] [ 4.306832] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
] [ 4.314551] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
] [ 4.322107] systemd[1]: Starting Remote File Systems (Pre).
] [ OK ] Reached target Remote File Systems (Pre).
] [ OK ] Reached target Libvirt guests shutdown.
] [ OK ] Reached target Paths.
] Expecting device dev-vg0-swap.device...
] Expecting device dev-disk-by\x2duuid-E3E9\x2d504E.device...
] [ OK ] Created slice Root Slice.
] [ OK ] Created slice User and Session Slice.
] [ OK ] Listening on Delayed Shutdown Socket.
] [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
] [ OK ] Listening on Journal Socket (/dev/log).
] [ OK ] Listening on Device-mapper event daemon FIFOs.
] [ OK ] Listening on LVM2 metadata daemon socket.
] [ OK ] Listening on udev Control Socket.
] [ OK ] Listening on udev Kernel Socket.
] [ OK ] Listening on Journal Socket.
] [ OK ] Created slice System Slice.
] [ OK ] Created slice system-getty.slice.
] [ OK ] Created slice system-serial\x2dgetty.slice.
] Mounting Debug File System...
] Starting udev Coldplug all Devices...
] Mounting Huge Pages File System...
] Starting Create list of required static device nodes...rrent kernel...
] Starting Load Kernel Modules...
] Mounting POSIX Message Queue File System...
] [ 4.681592] tun: Universal TUN/TAP device driver, 1.6
] [ 4.686630] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
] Starting Journal Service...
] [ OK ] Started Journal Service.
] Starting Remount Root and Kernel File Systems...
] [ OK ] Reached target Slices.
] [ OK [ 4.752379] EXT4-fs (md0): re-mounted. Opts: errors=remount-ro
] ] Mounted POSIX Message Queue File System.
] [ OK ] Mounted Huge Pages File System.
] [ OK ] Mounted Debug File System.
] [ OK ] Started Create list of required static device nodes ...current kernel.
] [ OK ] Started Load Kernel Modules.
] [ OK ] Started Remount Root and Kernel File Systems.
] [ OK ] Started udev Coldplug all Devices.
] Starting udev Wait for Complete Device Initialization...
] Starting Load/Save Random Seed...
] Starting Apply Kernel Variables...
] Starting Create Static Device Nodes in /dev...
] [ OK ] Started Load/Save Random Seed.
] [ OK ] Started Apply Kernel Variables.
] [ OK ] Started Create Static Device Nodes in /dev.
] Starting udev Kernel Device Manager...
] [ OK ] Reached target L] Started udev Kernel Device Manager.
] Starting LSB: MD array assembly...
] [ 5.071294] xgene-slimpro-mbox 10540000.mailbox: APM X-Gene SLIMpro MailBox registered
] [ 5.072247] EFI Variables Facility v0.08 2004-May-17
] [ 5.076864] pstore: using zlib compression
] [ 5.076879] pstore: Registered efi as persistent store backend
] [ 5.086591] EDAC MC: Ver: 3.0.0
] [ 5.090938] usbcore: registered new interface driver usbfs
] [ 5.090960] usbcore: registered new interface driver hub
] [ 5.091035] usbcore: registered new device driver usb
] [ OK ] Found device /[ 5.114481] X-Gene-DMA 1f270000.dma: PQ is disabled in HW
] dev/ttyS0.
] [ 5.121290] X-Gene-DMA 1f270000.dma: X-Gene DMA v0.00.1392 driver registered 4 channels
] [ 5.130474] X-Gene-DMA 1f270000.dma: dma0chan0: CAPABILITY ( SGCPY XOR )
] [ 5.137219] X-Gene-DMA 1f270000.dma: dma1chan0: CAPABILITY ( SGCPY )
] [ 5.143741] X-Gene-DMA 1f270000.dma: dma2chan0: CAPABILITY ( SGCPY )
] [ OK [ 5.150110] X-Gene-DMA 1f270000.dma: dma3chan0: CAPABILITY ( SGCPY )
] ] Started LSB: M[ 5.158440] EDAC MC0: Giving out device to module xgene_edac controller xgene_edac_mc_err: DEV xgene_edac_mc_err (INTERRUPT)
] D array assembly[ 5.170532] xgene-edac 78800000.edac: X-Gene EDAC MC registered
] .
] [ 5.177718] EDAC MC1: Giving out device to module xgene_edac controller xgene_edac_mc_err: DEV xgene_edac_mc_err (INTERRUPT)
] [ 5.189033] xgene-edac 78800000.edac: X-Gene EDAC MC registered
] [ 5.195028] EDAC MC2: Giving out device to module xgene_edac controller xgene_edac_mc_err: DEV xgene_edac_mc_err (INTERRUPT)
] [ 5.206202] xgene-edac 78800000.edac: X-Gene EDAC MC registered
] [ 5.212201] EDAC MC3: Giving out device to module xgene_edac controller xgene_edac_mc_err: DEV xgene_edac_mc_err (INTERRUPT)
] [ 5.223378] xgene-edac 78800000.edac: X-Gene EDAC MC registered
] [ OK [ 5.229328] EDAC DEVICE0: Giving out device to module xgene_edac controller xgene_pmd_err: DEV xgene_pmd_err (INTERRUPT)
] ] Found device /[ 5.241505] xgene-edac 78800000.edac: X-Gene EDAC PMD0 registered
] dev/disk/by-uuid[ 5.248970] EDAC DEVICE1: Giving out device to module xgene_edac controller xgene_pmd_err: DEV xgene_pmd_err (INTERRUPT)
] /E3E9-504E.
] [ 5.261133] xgene-edac 78800000.edac: X-Gene EDAC PMD1 registered
] [ 5.268341] EDAC DEVICE2: Giving out device to module xgene_edac controller xgene_pmd_err: DEV xgene_pmd_err (INTERRUPT)
] [ 5.279162] xgene-edac 78800000.edac: X-Gene EDAC PMD2 registered
] [ 5.285260] EDAC DEVICE3: Giving out device to module xgene_edac controller xgene_pmd_err: DEV xgene_pmd_err (INTERRUPT)
] [ 5.296081] xgene-edac 78800000.edac: X-Gene EDAC PMD3 registered
] [ 5.302181] EDAC DEVICE4: Giving out device to module xgene_edac controller xgene_l3_err: DEV xgene_l3_err (INTERRUPT)
] Mounting /boot/e[ 5.313580] xgene-edac 78800000.edac: X-Gene EDAC L3 registered
] fi...
] [ 5.320868] EDAC DEVICE5: Giving out device to module xgene_edac controller xgene_soc_err: DEV xgene_soc_err (INTERRUPT)
] [ 5.332259] xgene-edac 78800000.edac: X-Gene EDAC SoC registered
] [ 5.332266] xgene-edac 78800000.edac: IOB bus access error(s)
] [ 5.332269] xgene-edac 78800000.edac: IOB bus read access to unimplemented page error
] [ 5.332270] xgene-edac 78800000.edac: IOB bus read word aligned access error
] [ 5.332272] xgene-edac 78800000.edac: IOB bus read to page out of range access error
] [ 5.332276] xgene-edac 78800000.edac: IOB bridge agent (BA) transaction error
] [ 5.332278] xgene-edac 78800000.edac: IOB BA write response error
] [ 5.332279] xgene-edac 78800000.edac: Multiple IOB BA write response error
] [ 5.332282] xgene-edac 78800000.edac: IOB BA write access at 0x00.00000000 (0x00000000)
] [ 5.332284] xgene-edac 78800000.edac: IOB BA requestor ID 0x00002000
] Startin[ 5.400922] xgene-slimpro-i2c soc:i2cslimpro: Mailbox I2C Adapter registered
] g MD array monit[ 5.409321] xhci-hcd 19000000.dwusb: xHCI Host Controller
] or...
] [ 5.416004] xhci-hcd 19000000.dwusb: new USB bus registered, assigned bus number 1
] [ 5.424196] xhci-hcd 19000000.dwusb: hcc params 0x0220f06d hci version 0x100 quirks 0x00010010
] [ 5.432786] xhci-hcd 19000000.dwusb: irq 42, io mem 0x19000000
] [ OK [ 5.438669] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
] ] Started MD arr[ 5.446803] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
] ay monitor.
] [ 5.455364] usb usb1: Product: xHCI Host Controller
] [ 5.461333] usb usb1: Manufacturer: Linux 4.9.0-1-arm64 xhci-hcd
] [ 5.467312] usb usb1: SerialNumber: 19000000.dwusb
] [ 5.472333] hub 1-0:1.0: USB hub found
] [ 5.476114] hub 1-0:1.0: 1 port detected
] [ OK [ 5.480173] xhci-hcd 19000000.dwusb: xHCI Host Controller
] ] Mounted /boot/[ 5.486815] xhci-hcd 19000000.dwusb: new USB bus registered, assigned bus number 2
] efi.
] [ 5.495743] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
] [ 5.504318] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
] [ 5.511078] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
] [ 5.518267] usb usb2: Product: xHCI Host Controller
] [ 5.523122] usb usb2: Manufacturer: Linux 4.9.0-1-arm64 xhci-hcd
] [ 5.529101] usb usb2: SerialNumber: 19000000.dwusb
] [ 5.534085] hub 2-0:1.0: USB hub found
] [ 5.537836] hub 2-0:1.0: 1 port detected
] [ 5.541931] xhci-hcd 19800000.dwusb: xHCI Host Controller
] [ 5.547318] xhci-hcd 19800000.dwusb: new USB bus registered, assigned bus number 3
] [ 5.554917] xhci-hcd 19800000.dwusb: hcc params 0x0220f06d hci version 0x100 quirks 0x00010010
] [ 5.563505] xhci-hcd 19800000.dwusb: irq 43, io mem 0x19800000
] [ 5.569360] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
] [ 5.576126] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
] [ 5.583319] usb usb3: Product: xHCI Host Controller
] [ 5.588177] usb usb3: Manufacturer: Linux 4.9.0-1-arm64 xhci-hcd
] [ 5.594156] usb usb3: SerialNumber: 19800000.dwusb
] [ 5.599154] hub 3-0:1.0: USB hub found
] [ 5.602906] hub 3-0:1.0: 1 port detected
] [ 5.606942] xhci-hcd 19800000.dwusb: xHCI Host Controller
] [ 5.612325] xhci-hcd 19800000.dwusb: new USB bus registered, assigned bus number 4
] [ 5.619887] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
] [ 5.627979] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
] [ 5.634739] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
] [ 5.641928] usb usb4: Product: xHCI Host Controller
] [ 5.646786] usb usb4: Manufacturer: Linux 4.9.0-1-arm64 xhci-hcd
] [ 5.652765] usb usb4: SerialNumber: 19800000.dwusb
] [ 5.657774] hub 4-0:1.0: USB hub found
] [ 5.661526] hub 4-0:1.0: 1 port detected
] [ OK ] Started udev Wait for Complete Device Initialization.
] Starting Activation of LVM2 logical volumes...
] Starting Copy rules generated while the root was ro...
] [ OK ] Started Copy rules generated while the root was ro.
] [ OK ] Started Activation of LVM2 logical volumes.
] [ OK ] Found device /dev/vg0/swap.
] Activating swap /dev/vg0/swap...
] [ 5.822798] usb 1-1: new high-speed USB device number 2 using xhci-hcd
] [ OK ] Reached target Encrypted Volumes.
] [ 5.835018] Adding 16777212k swap on /dev/mapper/vg0-swap. Priority:-1 extents:1 across:16777212k SSFS
] Starting Activation of LVM2 logical volumes...
] [ OK ] Created slice system-lvm2\x2dpvscan.slice.
] Starting LVM2 PV scan on device 253:1...
] [ OK ] Activated swap /dev/vg0/swap.
] [ OK ] Started LVM2 PV scan on device 253:1.
] [ OK ] Reached target Swap.
] [ 5.946816] usb 3-1: new high-speed USB device number 2 using xhci-hcd
] [ OK ] Started Activation of LVM2 logical volumes.
] Starting Monitor[ 5.971331] usb 1-1: New USB device found, idVendor=0624, idProduct=0248
] ing of LVM2 mirr[ 5.978750] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
] ors, snapshots e[ 5.987231] usb 1-1: Product: Gadget USB HUB
] tc. ...ress poll[ 5.992850] usb 1-1: Manufacturer: no manufacturer
] ing...
] [ 5.998994] usb 1-1: SerialNumber: 0123456789
] [ 6.007955] hub 1-1:1.0: USB hub found
] [ 6.011820] hub 1-1:1.0: 5 ports detected
] [ OK ] Started Monitoring of LVM2 mirrors, snapshots etc. u...ogress polling.
] [ OK ] Reached target Local File Systems.
] Starting Create Volatile Files and Directories...
] Starting LSB: Raise network interfaces....
] [ OK ] Reached target Remote File Systems.
] [ 6.107747] usb 3-1: New USB device found, idVendor=0bda, idProduct=5401
] [ 6.114428] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
] [ 6.121537] usb 3-1: Product: USB3.0 Hub
] [ 6.125456] usb 3-1: Manufacturer: Realtek
] Starting T-1:1.0: 4 ports detected
] nt Storage...
] [ OK ] Started Create Volatile Files and Directories.
] [ 6.172878] systemd-journald[258]: Received request to flush runtime journal from PID 1
] Starting Update UTMP about System Boot/Shutdown...
] [ OK ] Started Trigger Flushing of Journal to Persistent Storage.
] [ OK ] Started Update UTMP about System Boot/Shutdown.
] [ 6.233904] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
] [ 6.272341] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
] [ OK ] Started LSB: Raise network interfaces..
] [ 6.330791] usb 1-1.1: new high-speed USB device number 3 using xhci-hcd
] [ OK ] Reached target Network.
] [ OK Starting LSB: ferm firewall configuration...
] [ 6.415363] ip_tables: (C) 2000-2006 Netfilter Core Team
] [ 6.432595] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
] [ 6.443645] usb 1-1.1: New USB device found, idVendor=0624, idProduct=0249
] [ 6.450506] usb 1-1.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6
] [ 6.457788] usb 1-1.1: Product: Keyboard/Mouse Function
] [ 6.463001] usb 1-1.1: Manufacturer: Avocent
] [ 6.467265] usb 1-1.1: SerialNumber: 20121018
] [ 6.475031] Netfilter messages via NETLINK v0.30.
] [ 6.490287] ip6_tables: (C) 2000-2006 Netfilter Core Team
] [ 6.498986] hidraw: raw HID events driver (C) Jiri Kosina
] [ 6.518214] usbcore: registered new interface driver usbhid
] [ 6.523782] usbhid: USB HID core driver
] [ 6.529802] input: Avocent Keyboard/Mouse Function as /devices/platform/soc/19000000.dwusb/usb1/1-1/1-1.1/1-1.1:1.0/0003:0624:0249.0001/input/input0
] [ OK ] Started LSB: ferm firewall configuration.
] [ OK ] Reached target System Initialization.
] [ 6.574790] usb 1-1.3: new high-speed USB device number 4 using xhci-hcd
] [ OK ] Listening on UUID daemon activation socket.
] [ OK ] Listening on Virtual machine log manager sD v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-19000000.dwusb-1.1/input0
] [ 6.616559] input: Avocent Keyboard/Mouse Function as /devices/platform/soc/19000000.dwusb/usb1/1-1/1-1.1/1-1.1:1.1/0003:0624:0249.0002/input/input1
] [ OK [ 6.629935] hid-generic 0003:0624:0249.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-19000000.dwusb-1.1/input1
] ] Listening on V[ 6.644395] input: Avocent Keyboard/Mouse Function as /devices/platform/soc/19000000.dwusb/usb1/1-1/1-1.1/1-1.1:1.2/0003:0624:0249.0003/input/input2
] irtual machine l[ 6.658985] hid-generic 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-19000000.dwusb-1.1/input2
] ock manager socket.
] [ 6.687465] usb 1-1.3: New USB device found, idVendor=0624, idProduct=0251
]
] [ 6.695435] usb 1-1.3: New USB device strings: Mfr=4, Product=5, SerialNumber=6
] [ 6.702787] usb 1-1.3: Product: Mass Storage Function
] [ 6.707817] usb 1-1.3: Manufacturer: Avocent
] [ 6.712070] usb 1-1.3: SerialNumber: 20120731-1
] [ OK ] Reached target Sockets.
] [ 6.726474] usb-storage 1-1.3:1.0: USB Mass Storage device detected
] [ 6.732853] scsi host4: usb-storage 1-1.3:1.0
] [ OK [ 6.737351] usbcore: registered new interface driver usb-storage
] ] Reached target Timers.
] [ 6.748146] usbcore: registered new interface driver uas
] [ OK ] Reached target Basic System.
] Starting uptime record daemon...
] [ OK ] Started uptime record daemon.
] Starting Munin Node...
] Starting OpenBSD Secure Shell server...
] [ OK ] Started OpenBSD Secure Shell server.
] Starting Regular background program processing daemon...
] [ OK ] Started Regular background program processing daemon.
] Starting Userdir-Ldap Replication Daemon...
] [ OK ] Started Userdir-Ldap Replication Daemon.
] Starting Deferred execution scheduler...
] [ OK ] Started Deferred execution scheduler.
] Starting Netfilter Userspace Logging Daemon...
] Starting LLDP daemon...
] Starting /etc/rc.local Compatibility...
] Starting Login Service...
] Starting LSB: Start or stop stunnel 4.x (SSL tunnel ...ork daemons)...
] Starting LSB: Start NTP daemon...
] Starting (null)...
] Starting LSB: Start Bacula File Daemon at boot time...
] Starting LSB: Entropy Key Manager, EGD->Linux pool stirrer...
] Starting LSB: Initialize EDAC...
] Starting (null)...
] Starting (null)...
] Starting D-Bus System Message Bus...
] [ 7.118611] random: crng init done
] [ OK ] Started D-Bus System Message Bus.
] Starting Virtualization daemon...
] Starting Permit User Sessions...
] [ OK ] Started LLDP daemon.
] [ OK ] Started Munin Node.
] [ OK ] Started Netfilter Userspace Logging Daemon.
] [ 7.211591] xgene-enet 1f210000.ethernet eth0: Link is Down
] [ OK ] Started /etc/rc.local Compatibility.
] [ OK ] Started LSB: Start or stop stunnel 4.x (SSL tunnel f...twork daemons).
] [ 7.243581] xgene-enet 1f210030.ethernet eth1: Link is Down
] [ OK ] Started LSB: Start NTP daemon.
] [ OK ] Started (null).
] [ OK ] Started LSB: Start Bacula File Daemon at boot time.
] [ OK ] Started LSB: Entropy Key Manager, EGD->Linux pool stirrer.
] [ OK ] Started LSB: Initialize EDAC.
] [ OK ] Started (null).
] [ OK ] Started Permit User Sessions.
] [ OK ] Started Virtualization daemon.
] [ OK ] Started Login Service.
] Starting Suspend/Resume Running libvirt Guests...
] Starting System Logger Daemon...
] [ OK ] Reached target Host and Network Name Lookups.
] Starting LSB: exim Mail Transport Agent...
] Starting LSB: Open vSwitch switch...
] Starting LSB: Start/Stop the Nagios remote plugin execution daemon...
] Starting Getty on tty1...
] [ OK ] Started Getty on tty1.
] Starting Serial Getty on ttyS0...
] [ OK ] Started Serial Getty on ttyS0.
] [ OK ] Reached target Login Prompts.
] Starting Munin Node - asynchronous proxy...
] [ OK ] Started Munin Node - asynchronous proxy.
] [ OK ] Started Suspend/Resume Running libvirt Guests.
] [FAILED] Failed to start System Logger Daemon.
] See 'systemctl status syslog-ng.service' for details.
] [ OK ] Started LSB: exim Mail Transport Agent.
] [ OK ] Started LSB: Start/Stop the Nagios remote plugin execution daemon.
] [ 7.724317] openvswitch: Open vSwitch switching datapath
] [ 7.755506] scsi 4:0:0:0: CD-ROM MP EMS Virtual Media 0326 PQ: 0 ANSI: 0
] [ 7.766445] scsi 4:0:0:1: Direct-Access MP EMS Virtual Media 0326 PQ: 0 ANSI: 0 CCS
] [ 7.775499] scsi 4:0:0:2: Direct-Access MP EMS Virtual Media 0326 PQ: 0 ANSI: 0 CCS
] [ 7.784696] scsi 4:0:0:0: Attached scsi generic sg2 type 5
] [ 7.790719] sd 4:0:0:1: Attached scsi generic sg3 type 0
] [ 7.796602] sd 4:0:0:2: Attached scsi generic sg4 type 0
] [ 7.912420] sr 4:0:0:0: [sr0] scsi3-mmc drive: 0x/0x cd/rw caddy
] [ 7.918430] cdrom: Uniform CD-ROM driver Revision: 3.20
] [ 7.920581] sd 4:0:0:2: [sdd] Attached SCSI removable disk
] [ 7.920918] sd 4:0:0:1: [sdc] Attached SCSI removable disk
] [ 8.065309] d950] openvswitch: netlink: Key type 62 is out of range max 26
] [ 8.103092] device eth0 entered promiscuous mode
] [ 8.112958] device br-inet entered promiscuous mode
] [ OK ] Created slice system-ifup.slice.
] Starting ifup for br-inet...
] [ OK ] Started ifup for br-inet.
] [ OK ] Started LSB: Open vSwitch switch.
] [ 8.298807] xgene-enet 1f610000.ethernet eth2: Link is Up - 10Gbps
] [ 8.304993] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
] [ OK ] Started (null).
] [ OK ] Reached target Multi-User System.
] [ OK ] Reached target Graphical Interface.
] Starting Update UTMP about System Runlevel Changes...
] [ OK ] Started Update UTMP about System Runlevel Changes.
] [ 9.260153] xgene-enet 1f210000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
] [ 9.295203] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
] [ 9.301572] xgene-enet 1f210030.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
]
] Debian GNU/Linux 8 aagaard ttyS0
]
] aagaard login: [ 10.191904] efi_call_virt_check_flags: 75 callbacks suppressed
] [ 10.197723] efi: [Firmware Bug]: IRQ flags corrupted (0x00000140=>0x00000100) by EFI set_time
] [ 10.206306] efi: [Firmware Bug]: IRQ flags corrupted (0x00000140=>0x00000100) by EFI get_time
] [ 12.143611] 8021q: 802.1Q VLAN Support v1.8
--
| .''`. ** Debian **
Peter Palfrader | : :' : The universal
https://www.palfrader.org/ | `. `' Operating System
| `- https://www.debian.org/
Reply to: