[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#846411: linux-image-4.8.0-1-amd64: Webcam Logitech C910 mix doesn't work properly



Package: src:linux
Version: 4.8.7-1
Severity: normal

Dear Maintainer,

I have problem with my Logitech C910 after update linux-image-4.8.0-1-amd64
package from 4.8.5 to 4.8.7-1. I can see such lines in dmesg :
[ 2714.851108] usb 3-9.1: 1:3: cannot set freq 32000 to ep 0x86
[ 2735.843040] usb 3-9.1: 1:3: cannot set freq 32000 to ep 0x86
[ 2752.995121] usb 3-9.1: 1:3: cannot set freq 32000 to ep 0x86

And sound input does not work. pulseaudio log have such lines:
D: [alsa-source-USB Audio] alsa-util.c: Got POLLERR from ALSA
D: [alsa-source-USB Audio] alsa-util.c: Got POLLIN from ALSA
D: [alsa-source-USB Audio] alsa-util.c: PCM state is SUSPENDED
I: [alsa-source-USB Audio] (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_RESUME failed
(-38)
I: [alsa-source-USB Audio] (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed
(-71)
I: [alsa-source-USB Audio] (alsa-lib)pcm.c: cannot recovery from suspend,
prepare failed: Ошибка протокола
W: [alsa-source-USB Audio] alsa-util.c: Could not recover from
POLLERR|POLLNVAL|POLLHUP and SUSPENDED: Ошибка протокола

It look like https://bugzilla.kernel.org/show_bug.cgi?id=44281 bug. But I
didn't see it before on my devices.

If I do such commands
    rmmod snd-usb-audio
    modprobe snd-usb-audio
all work fine



-- Package-specific info:
** Version:
Linux version 4.8.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.1 20161019 (Debian 5.4.1-3) ) #1 SMP Debian 4.8.7-1 (2016-11-13)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.8.0-1-amd64 root=UUID=f8fcbe53-1f55-4a1d-8026-4a484a839012 ro quiet noresume cgroup_enable=memory swapaccount=1

** Not tainted

** Kernel log:
[    2.790933] snd_hda_codec_realtek hdaudioC1D2:    mono: mono_out=0x0
[    2.790934] snd_hda_codec_realtek hdaudioC1D2:    dig-out=0x11/0x1e
[    2.790934] snd_hda_codec_realtek hdaudioC1D2:    inputs:
[    2.790935] snd_hda_codec_realtek hdaudioC1D2:      Rear Mic=0x18
[    2.790936] snd_hda_codec_realtek hdaudioC1D2:      Front Mic=0x19
[    2.790936] snd_hda_codec_realtek hdaudioC1D2:      Line=0x1a
[    2.790937] snd_hda_codec_realtek hdaudioC1D2:      CD=0x1c
[    2.790937] snd_hda_codec_realtek hdaudioC1D2:    dig-in=0x1f
[    2.791694] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.793413] intel_rapl: Found RAPL domain package
[    2.793414] intel_rapl: Found RAPL domain core
[    2.793416] intel_rapl: Found RAPL domain uncore
[    2.793417] intel_rapl: Found RAPL domain dram
[    2.797174] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.797501] acpi device:70: registered as cooling_device13
[    2.797560] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    2.804554] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
[    2.805581] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[    2.805611] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[    2.805642] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[    2.805678] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[    2.805709] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[    2.805740] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[    2.805773] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[    2.820636] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.820650] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0
[    2.837257] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    2.839341] fbcon: inteldrmfb (fb0) is primary device
[    2.853284] usb 3-10.3: New USB device found, idVendor=045e, idProduct=07a5
[    2.853285] usb 3-10.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.853285] usb 3-10.3: Product: Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v9.0
[    2.853286] usb 3-10.3: Manufacturer: Microsoft
[    2.855249] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[    2.855321] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[    2.855397] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[    2.867430] Console: switching to colour frame buffer device 160x64
[    2.874716] hidraw: raw HID events driver (C) Jiri Kosina
[    2.876614] media: Linux media interface: v0.10
[    2.880173] Linux video capture interface: v2.00
[    2.882755] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.891427] usbcore: registered new interface driver usbhid
[    2.891428] usbhid: USB HID core driver
[    2.893430] hid-generic 0003:06DA:0003.0001: hiddev0,hidraw0: USB HID v1.11 Device [OMRON USB UPS] on usb-0000:00:14.0-11/input0
[    2.893511] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.3/3-10.3:1.0/0003:045E:07A5.0002/input/input18
[    2.956182] hid-generic 0003:045E:07A5.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v9.0] on usb-0000:00:14.0-10.3/input0
[    2.956315] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.3/3-10.3:1.1/0003:045E:07A5.0003/input/input19
[    2.956638] hid-generic 0003:045E:07A5.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v9.0] on usb-0000:00:14.0-10.3/input1
[    2.968586] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.3/3-10.3:1.2/0003:045E:07A5.0004/input/input20
[    3.028102] hid-generic 0003:045E:07A5.0004: input,hidraw3: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v9.0] on usb-0000:00:14.0-10.3/input2
[    3.048109] clocksource: Switched to clocksource tsc
[    3.166493] usbcore: registered new interface driver snd-usb-audio
[    3.166549] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0821)
[    3.179425] uvcvideo 3-9.1:1.2: Entity type for entity Extension 4 was not initialized!
[    3.179427] uvcvideo 3-9.1:1.2: Entity type for entity Processing 2 was not initialized!
[    3.179428] uvcvideo 3-9.1:1.2: Entity type for entity Camera 1 was not initialized!
[    3.179428] uvcvideo 3-9.1:1.2: Entity type for entity Extension 5 was not initialized!
[    3.179429] uvcvideo 3-9.1:1.2: Entity type for entity Extension 6 was not initialized!
[    3.179430] uvcvideo 3-9.1:1.2: Entity type for entity Extension 7 was not initialized!
[    3.179430] uvcvideo 3-9.1:1.2: Entity type for entity Extension 8 was not initialized!
[    3.179595] input: UVC Camera (046d:0821) as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.2/input/input21
[    3.179739] usbcore: registered new interface driver uvcvideo
[    3.179739] USB Video Class driver (1.1.1)
[    3.374054] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    3.375318] br0: port 1(eth0) entered blocking state
[    3.375318] br0: port 1(eth0) entered disabled state
[    3.375429] device eth0 entered promiscuous mode
[    3.599045] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[    3.728312] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    3.806845] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[    6.437945] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[    6.437991] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.438054] br0: port 1(eth0) entered blocking state
[    6.438056] br0: port 1(eth0) entered forwarding state
[    6.438163] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[    7.433988] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[    7.435010] NFSD: starting 90-second grace period (net ffffffff854daa00)
[    7.453709] FS-Cache: Loaded
[    7.463180] FS-Cache: Netfs 'nfs' registered for caching
[    7.465791] Key type dns_resolver registered
[    7.477127] NFS: Registering the id_resolver key type
[    7.477131] Key type id_resolver registered
[    7.477131] Key type id_legacy registered
[    7.946597] random: crng init done
[    8.364056] usb 3-9.1: reset high-speed USB device number 4 using xhci_hcd
[    8.941719] Bridge firewalling registered
[    8.979565] IPv6: ADDRCONF(NETDEV_UP): br-5318ae73c8b7: link is not ready
[    9.031717] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[   12.008015] usb 3-9.1: 1:3: cannot set freq 32000 to ep 0x86
[   17.070080] fuse init (API version 7.25)
[   19.944012] usb 3-9.1: 1:3: cannot set freq 32000 to ep 0x86
[ 2714.851108] usb 3-9.1: 1:3: cannot set freq 32000 to ep 0x86
[ 2735.843040] usb 3-9.1: 1:3: cannot set freq 32000 to ep 0x86
[ 2752.995121] usb 3-9.1: 1:3: cannot set freq 32000 to ep 0x86
[ 2862.050974] usb 3-9.1: 1:3: cannot set freq 32000 to ep 0x86
[ 2953.954635] usb 3-9.1: 1:3: cannot set freq 32000 to ep 0x86
[ 2968.838647] usb 3-9.1: 1:3: cannot set freq 32000 to ep 0x86
[ 3001.826526] usb 3-9.1: 1:3: cannot set freq 32000 to ep 0x86
[ 3015.906558] usb 3-9.1: 1:3: cannot set freq 32000 to ep 0x86
[ 3216.224998] usbcore: deregistering interface driver snd-usb-audio
[ 3228.150767] usbcore: registered new interface driver snd-usb-audio

** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: Z87X-UD4H
product_version: To be filled by O.E.M.
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: F9
board_vendor: Gigabyte Technology Co., Ltd.
board_name: Z87X-UD4H-CF
board_version: x.x

** Loaded modules:
snd_usb_audio
fuse
ipt_MASQUERADE
nf_nat_masquerade_ipv4
iptable_nat
nf_nat_ipv4
xt_addrtype
nf_nat
br_netfilter
overlay
cpufreq_powersave
cpufreq_conservative
cpufreq_userspace
rpcsec_gss_krb5
nfsv4
dns_resolver
nfs
fscache
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
nf_conntrack
xt_tcpudp
bridge
stp
llc
iptable_filter
joydev
binfmt_misc
hid_generic
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
videobuf2_core
videodev
snd_usbmidi_lib
snd_rawmidi
media
usbhid
snd_seq_device
hid
snd_hda_codec_hdmi
nls_utf8
nls_cp866
vfat
fat
intel_rapl
x86_pkg_temp_thermal
snd_hda_codec_realtek
i915
mxm_wmi
snd_hda_codec_generic
kvm_intel
snd_hda_intel
kvm
snd_hda_codec
snd_hda_core
iTCO_wdt
iTCO_vendor_support
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
irqbypass
drm_kms_helper
efi_pstore
snd_timer
drm
evdev
crct10dif_pclmul
crc32_pclmul
snd
mei_me
ghash_clmulni_intel
soundcore
sg
mei
i2c_algo_bit
lpc_ich
i2c_i801
efivars
shpchp
mfd_core
i2c_smbus
serio_raw
pcspkr
battery
wmi
video
tpm_infineon
tpm_tis
tpm_tis_core
soc_button_array
button
tpm
it87
hwmon_vid
coretemp
nfsd
auth_rpcgss
parport_pc
nfs_acl
ppdev
lockd
lp
grace
parport
sunrpc
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
jbd2
fscrypto
ecb
mbcache
btrfs
raid10
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
async_tx
xor
raid6_pq
libcrc32c
crc32c_generic
raid1
raid0
multipath
linear
md_mod
sd_mod
crc32c_intel
e1000e
ahci
libahci
ptp
aesni_intel
libata
xhci_pci
aes_x86_64
ehci_pci
glue_helper
xhci_hcd
lrw
ehci_hcd
gf128mul
ablk_helper
scsi_mod
psmouse
cryptd
usbcore
pps_core
usb_common
fan
thermal
fjes

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM Controller [8086:0c00] (rev 06)
	Subsystem: Gigabyte Technology Co., Ltd 4th Gen Core Processor DRAM Controller [1458:5000]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: hsw_uncore

00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06) (prog-if 00 [VGA controller])
	Subsystem: Gigabyte Technology Co., Ltd Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [1458:d000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 32
	Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at f000 [size=64]
	[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: i915
	Kernel modules: i915

00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
	Subsystem: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:2010]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 33
	Region 0: Memory at f0534000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 04) (prog-if 30 [XHCI])
	Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family USB xHCI [1458:5007]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 26
	Region 0: Memory at f0520000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci

00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
	Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family MEI Controller [1458:1c3a]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 30
	Region 0: Memory at f053f000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: mei_me
	Kernel modules: mei_me

00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection I217-V [8086:153b] (rev 04)
	DeviceName:  Onboard LAN
	Subsystem: Gigabyte Technology Co., Ltd Ethernet Connection I217-V [1458:e000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 29
	Region 0: Memory at f0500000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at f053d000 (32-bit, non-prefetchable) [size=4K]
	Region 2: I/O ports at f080 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: e1000e
	Kernel modules: e1000e

00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family USB EHCI [1458:5006]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f053c000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 04)
	Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset High Definition Audio Controller [1458:a002]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 31
	Region 0: Memory at f0530000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.4 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d4) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 11
	Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1c.5 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 [8086:8c1a] (rev d4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: f0400000-f04fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family USB EHCI [1458:5006]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f053b000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1f.0 ISA bridge [0601]: Intel Corporation Z87 Express LPC Controller [8086:8c44] (rev 04)
	Subsystem: Gigabyte Technology Co., Ltd Z87 Express LPC Controller [1458:5001]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 04) (prog-if 01 [AHCI 1.0])
	Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [1458:b005]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 27
	Region 0: I/O ports at f0d0 [size=8]
	Region 1: I/O ports at f0c0 [size=4]
	Region 2: I/O ports at f0b0 [size=8]
	Region 3: I/O ports at f0a0 [size=4]
	Region 4: I/O ports at f060 [size=32]
	Region 5: Memory at f053a000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 04)
	Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family SMBus Controller [1458:5001]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at f0539000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at f040 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801

02:00.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 41) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 11
	Bus: primary=02, secondary=03, subordinate=03, sec-latency=32
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

04:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller [1b4b:9172] (rev 11) (prog-if 01 [AHCI 1.0])
	Subsystem: Gigabyte Technology Co., Ltd 88SE9172 SATA 6Gb/s Controller [1458:b000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 28
	Region 0: I/O ports at e040 [size=8]
	Region 1: I/O ports at e030 [size=4]
	Region 2: I/O ports at e020 [size=8]
	Region 3: I/O ports at e010 [size=4]
	Region 4: I/O ports at e000 [size=16]
	Region 5: Memory at f0410000 (32-bit, non-prefetchable) [size=512]
	Expansion ROM at f0400000 [disabled] [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci


** USB devices:
Bus 002 Device 002: ID 8087:8000 Intel Corp. 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 003: ID 045b:0210 Hitachi, Ltd 
Bus 004 Device 002: ID 045b:0210 Hitachi, Ltd 
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 046d:0821 Logitech, Inc. HD Webcam C910
Bus 003 Device 002: ID 045b:0209 Hitachi, Ltd 
Bus 003 Device 005: ID 06da:0003 Phoenixtec Power Co., Ltd 1300VA UPS
Bus 003 Device 006: ID 045e:07a5 Microsoft Corp. Wireless Receiver 1461C
Bus 003 Device 003: ID 045b:0209 Hitachi, Ltd 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: stretch/sid
  APT prefers testing
  APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.8.0-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.8.0-1-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.125
ii  kmod                                    23-1
ii  linux-base                              4.5

Versions of packages linux-image-4.8.0-1-amd64 recommends:
ii  firmware-linux-free  3.4
ii  irqbalance           1.1.0-2

Versions of packages linux-image-4.8.0-1-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-efi-amd64          2.02~beta3-3
pn  linux-doc-4.8           <none>

Versions of packages linux-image-4.8.0-1-amd64 is related to:
ii  firmware-amd-graphics     20160824-1
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
ii  firmware-iwlwifi          20160824-1
pn  firmware-libertas         <none>
ii  firmware-linux-nonfree    20160824-1
ii  firmware-misc-nonfree     20160824-1
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
ii  firmware-realtek          20160824-1
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information


Reply to: