I am facing the same nmi bug soft lock in Apple g5 quad core with radeon ati hd7460 pci-express (the bug came in hypervisor console driver hvcs.ko)
Package: src:linux
Version: 4.8.7-1
Severity: normal
Dear Maintainer,
I'm unable to boot into functional system with KMS radeon. When
radeon.modeset=0 on kernel command-line system it starts and run OK.
Without disabled modeset, mostly the screen goes blank, but sometimes
the messages stays on console. System is locked and not respond to sysrq
or so. Kernel stack is displayed periodically as watchdog initiates.
Captured messages (using netconsole) are attached.
Regards
--
Zito
-- Package-specific info:
** Version:
Linux version 4.8.0-1-amd64 (debian-kernel@lists.debian.org ) (gcc version 5.4.1 20161019 (Debian 5.4.1-3) ) #1 SMP Debian 4.8.7-1 (2016-11-13)
** Command line:
BOOT_IMAGE=/vmlinuz-4.8.0-1-amd64 root=UUID=632652f0-7f3c-4316- a74d-d05f2fd4b3ae ro radeon.modeset=0
** Not tainted
** Kernel log:
[ 3.010746] scsi 6:0:0:1: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0
[ 3.011944] scsi 6:0:0:2: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0
[ 3.013151] scsi 6:0:0:3: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0
[ 3.082153] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 3.083229] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3.084577] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 3.085913] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 4.576131] floppy0: no floppy controllers found
[ 4.637754] PM: Starting manual resume from disk
[ 4.637800] PM: Hibernation image partition 8:2 present
[ 4.637801] PM: Looking for hibernation image.
[ 4.639867] PM: Image not found (code -22)
[ 4.639868] PM: Hibernation image not present or could not be loaded.
[ 5.144483] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 6.504046] random: crng init done
[ 6.629488] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.773851] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 6.774077] systemd[1]: Detected architecture x86-64.
[ 6.870642] systemd[1]: Set hostname to <vdr>.
[ 8.285798] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 8.286228] systemd[1]: Listening on LVM2 poll daemon socket.
[ 8.286680] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 8.286996] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 8.287353] systemd[1]: Listening on Journal Audit Socket.
[ 8.287674] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 8.287972] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 9.059352] loop: module loaded
[ 9.149613] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 9.498760] RPC: Registered named UNIX socket transport module.
[ 9.498803] RPC: Registered udp transport module.
[ 9.498837] RPC: Registered tcp transport module.
[ 9.498871] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.258718] systemd-journald[221]: File /var/log/journal/0ca8a8b0a1569675c187692c5066ca e3/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 10.623394] systemd-journald[221]: Received request to flush runtime journal from PID 1
[ 11.485959] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 11.486007] ACPI: Power Button [PWRB]
[ 11.486125] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 11.486164] ACPI: Power Button [PWRF]
[ 11.552262] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 11.552358] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb10
[ 11.724952] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.739879] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 11.740025] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x14
[ 11.740083] sp5100_tco: failed to find MMIO address, giving up.
[ 11.868374] [drm] Initialized drm 1.1.0 20060810
[ 11.877794] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 11.877895] sr 4:0:1:0: Attached scsi generic sg1 type 5
[ 11.877981] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 11.878062] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 11.878149] sd 6:0:0:2: Attached scsi generic sg4 type 0
[ 11.878229] sd 6:0:0:3: Attached scsi generic sg5 type 0
[ 11.990613] parport_pc 00:04: reported by Plug and Play ACPI
[ 11.990714] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 12.280244] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon module!
[ 12.295488] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 12.350432] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 12.483323] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
[ 12.494928] flexcop-pci: will use the HW PID filter.
[ 12.494969] flexcop-pci: card revision 2
[ 12.520394] DVB: registering new adapter (FlexCop Digital TV device)
[ 12.522128] b2c2-flexcop: MAC address = 00:d0:d7:12:f8:ae
[ 12.522595] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121)
[ 12.522635] CX24123: wrong demod revision: 87
[ 12.814375] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.2/sound/card1/ input9
[ 12.817841] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC883: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 12.817896] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.817937] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 12.817975] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 12.818010] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 12.818045] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 12.818081] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 12.818116] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 12.818151] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 12.832201] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 12.832335] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 12.832446] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 12.832578] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 12.832692] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 12.842420] ppdev: user-space parallel port driver
[ 12.929940] kvm: Nested Virtualization enabled
[ 12.943548] powernow_k8: fid 0xf (2300 MHz), vid 0xe
[ 12.943590] powernow_k8: fid 0xe (2200 MHz), vid 0xf
[ 12.943625] powernow_k8: fid 0xc (2000 MHz), vid 0x11
[ 12.943660] powernow_k8: fid 0xa (1800 MHz), vid 0x13
[ 12.943698] powernow_k8: fid 0x2 (1000 MHz), vid 0x16
[ 12.943774] powernow_k8: Found 1 AMD Athlon(tm) X2 Dual Core Processor BE-2400 (2 cpu cores) (version 2.20.00)
[ 13.128477] b2c2-flexcop: found 'ST STV0299 DVB-S' .
[ 13.128544] b2c2_flexcop_pci 0000:03:05.0: DVB: registering adapter 5 frontend 0 (ST STV0299 DVB-S)...
[ 13.128856] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev 2.6' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
[ 13.842271] Adding 1952764k swap on /dev/sda2. Priority:-1 extents:1 across:1952764k FS
[ 14.816253] floppy0: no floppy controllers found
[ 15.486194] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 18.105361] r8169 0000:02:00.0 eth0: link down
[ 18.105378] r8169 0000:02:00.0 eth0: link down
[ 18.105509] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.971154] r8169 0000:02:00.0 eth0: link up
[ 19.971231] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 25.923335] input: lircd-uinput as /devices/virtual/input/input15
[ 28.520086] b2c2_flexcop_pci 0000:03:05.0: DVB: adapter 5 frontend 0 frequency 0 out of range (950000..2150000)
[ 3759.150438] perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: Phoenix Technologies, LTD
bios_version: ASUS M2A-VM HDMI ACPI BIOS Revision 2302
board_vendor: ASUSTeK Computer INC.
board_name: M2A-VM HDMI
board_version: 1.XX
** Loaded modules:
uinput
dvb_pll
powernow_k8
kvm_amd
ppdev
stv0299
snd_hda_codec_realtek
snd_hda_codec_hdmi
snd_hda_codec_generic
snd_cmipci
kvm
snd_mpu401_uart
snd_opl3_lib
irqbypass
snd_rawmidi
snd_seq_device
b2c2_flexcop_pci
b2c2_flexcop
s5h1420
cx24113
gameport
cx24123
dvb_core
snd_hda_intel
snd_hda_codec
snd_hda_core
pcspkr
serio_raw
snd_hwdep
k8temp
ttm
joydev
evdev
snd_pcm
drm_kms_helper
parport_pc
snd_timer
sg
drm
i2c_algo_bit
snd
asus_atk0110
soundcore
sp5100_tco
shpchp
parport
i2c_piix4
button
acpi_cpufreq
tpm_tis
tpm_tis_core
tpm
sunrpc
loop
ip_tables
x_tables
autofs4
ext4
crc16
jbd2
crc32c_generic
fscrypto
ecb
glue_helper
lrw
gf128mul
ablk_helper
cryptd
aes_x86_64
mbcache
sr_mod
cdrom
sd_mod
ata_generic
hid_generic
usbhid
hid
uas
usb_storage
ohci_pci
psmouse
thermal
fan
fjes
ehci_pci
ohci_hcd
ehci_hcd
pata_atiixp
ahci
libahci
firewire_ohci
firewire_core
crc_itu_t
libata
scsi_mod
usbcore
r8169
mii
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RS690 Host Bridge [1002:7910]
Subsystem: ASUSTeK Computer Inc. RS690 Host Bridge [1043:826d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
00:01.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RS690 PCI to PCI Bridge (Internal gfx) [1002:7912] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fda00000-fdbfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:07.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RS690 PCI to PCI Bridge (PCI Express Port 3) [1002:7917] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 24
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:12.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. SB600 Non-Raid-5 SATA [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at ff00 [size=8]
Region 1: I/O ports at fe00 [size=4]
Region 2: I/O ports at fd00 [size=8]
Region 3: I/O ports at fc00 [size=4]
Region 4: I/O ports at fb00 [size=16]
Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. SB600 USB (OHCI0) [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. SB600 USB (OHCI1) [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. SB600 USB (OHCI2) [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.3 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. SB600 USB (OHCI3) [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.4 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. SB600 USB (OHCI4) [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. SB600 USB Controller (EHCI) [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 14)
Subsystem: ASUSTeK Computer Inc. SBx00 SMBus Controller [1043:81ef]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 0b00 [size=16]
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4, sp5100_tco
00:14.1 IDE interface [0101]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. SB600 IDE [1043:81ef]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at f900 [size=16]
Kernel driver in use: pata_atiixp
Kernel modules: pata_atiixp, ata_generic
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383]
Subsystem: ASUSTeK Computer Inc. SBx00 Azalia (Intel HDA) [1043:8249]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe020000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 PCI to LPC Bridge [1002:438d]
Subsystem: ASUSTeK Computer Inc. SB600 PCI to LPC Bridge [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: fdd00000-fddfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
Kernel modules: k8temp
01:05.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RS690 [Radeon X1200] [1002:791e] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. RS690 [Radeon X1200] [1043:826d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 3
Region 0: Memory at f0000000 (64-bit, prefetchable) [size=128M]
Region 2: Memory at fdbe0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at de00 [size=256]
Region 5: Memory at fda00000 (32-bit, non-prefetchable) [size=1M]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: radeon
01:05.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] RS690 HDMI Audio [Radeon Xpress 1200 Series] [1002:7919]
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RS690 HDMI Audio [Radeon Xpress 1200 Series] [1002:7919]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 26
Region 0: Memory at fdbfc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. P5B [1043:81aa]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 25
Region 0: I/O ports at ee00 [size=256]
Region 2: Memory at fdfff000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at fdf00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
03:05.0 Network controller [0280]: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card [13d0:2103] (rev 02)
Subsystem: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card [13d0:2103]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fdee0000 (32-bit, non-prefetchable) [size=64K]
Region 1: I/O ports at cf00 [size=32]
Kernel driver in use: b2c2_flexcop_pci
Kernel modules: b2c2_flexcop_pci
03:06.0 Multimedia audio controller [0401]: C-Media Electronics Inc CMI8738/CMI8768 PCI Audio [13f6:0111] (rev 10)
Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device [13f6:0111]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at cc00 [size=256]
Capabilities: <access denied>
Kernel driver in use: snd_cmipci
Kernel modules: snd_cmipci
03:07.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Motherboard [1043:81fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fdeff000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at ce00 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci
** USB devices:
Bus 001 Device 004: ID 05e3:070e Genesys Logic, Inc. USB 2.0 Card Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 04d9:2519 Holtek Semiconductor, Inc. Shenzhen LogoTech 2.4GHz receiver
Bus 003 Device 002: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 4.8.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=cs_CZ.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.8.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.125
ii kmod 23-1
ii linux-base 4.5
Versions of packages linux-image-4.8.0-1-amd64 recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2
Versions of packages linux-image-4.8.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta3-3
pn linux-doc-4.8 <none>
Versions of packages linux-image-4.8.0-1-amd64 is related to:
ii firmware-amd-graphics 20160824-1
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20160824-1
ii firmware-misc-nonfree 20160824-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20160824-1
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information