Bug#844446: linux-image-4.8.0-1-amd64: Fails to boot on qemu/kvm
On Tue, Nov 15, 2016 at 11:12 AM, Stefan Fritsch <sf@sfritsch.de> wrote:
> Package: src:linux
> Version: 4.8.5-1
Please upgrade to version 4.8.7-1
as it does not exhibit issue you mentioned in a default settings
QEMU/KVM executing in Oracle Linux environment.
< https://pbs.twimg.com/media/CxhnBQAWQAAb8Xw.jpg:large >
-- even when Reiser4 -patched ;-)
> Severity: important
>
> Dear Maintainer,
>
> I am running a stretch VM on a jessie KVM/qemu/libvirt host. After the
> upgrade to 4.8.5 the system does not boot anymore. Booting the 4.7 kernel
> works.
>
> If I start normally, systemd hangs starting some early units (like
> keyboard layout). The console log from 'emergency' boot is attached and
> shows various oopses and backtraces.
>
> The qemu command line on the host is (with some ids replaced):
>
> qemu-system-x86_64 -enable-kvm -name XXX -S -machine
> pc-i440fx-2.1,accel=kvm,usb=off -cpu Broadwell -m 1024 -realtime
> mlock=off -smp 2,sockets=2,cores=1,threads=1 -uuid
> b2d87a70-469f-4433-xxxx-xxxxxxxxxxxx -nographic -no-user-config
> -nodefaults -device sga -chardev
> socket,id=charmonitor,path=/home/XXX/.config/libvirt/qemu/lib/XXX.monitor,server,nowait
> -mon chardev=charmonitor,id=monitor,mode=control -rtc
> base=utc,driftfix=slew -global kvm-pit.lost_tick_policy=discard -no-hpet
> -no-shutdown -boot strict=on -device
> ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x3.0x7 -device
> ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x3
> -device
> ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pci.0,addr=0x3.0x1
> -device
> ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pci.0,addr=0x3.0x2 -drive
> file=/dev/vg0/kvm-XXX,if=none,id=drive-virtio-disk0,format=raw,cache=none,aio=native
> -device
> virtio-blk-pci,scsi=off,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1
> -drive if=none,id=drive-ide0-0-0,readonly=on,format=raw -device
> ide-cd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 -netdev
> tap,ifname=vxxxx0,id=hostnet0 -device
> virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:12:xx:xx,bus=pci.0,addr=0x2
> -chardev pty,id=charserial0 -device
> isa-serial,chardev=charserial0,id=serial0 -device usb-tablet,id=input0
> -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5 -object
> rng-random,id=rng0,filename=/dev/random -device
> virtio-rng-pci,rng=rng0,bus=pci.0,addr=0x6 -msg timestamp=on
>
> The KVM host is a i7-6700 running linux 3.16.36-1+deb8u2
>
> Cheers,
> Stefan
>
> -- Package-specific info:
>
> ** Model information
> sys_vendor: QEMU
> product_name: Standard PC (i440FX + PIIX, 1996)
> product_version: pc-i440fx-2.1
> chassis_vendor: QEMU
> chassis_version: pc-i440fx-2.1
> bios_vendor: SeaBIOS
> bios_version: 1.7.5-20140531_083030-gandalf
>
> ** PCI devices:
> 00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02)
> Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000]
> Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:01.1 IDE interface [0101]: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] [8086:7010] (prog-if 80 [Master])
> Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
> Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
> Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
> Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
> Region 4: I/O ports at c100 [size=16]
> Kernel driver in use: ata_piix
> Kernel modules: ata_piix, ata_generic
>
> 00:01.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 03)
> Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 9
> Kernel driver in use: piix4_smbus
> Kernel modules: i2c_piix4
>
> 00:02.0 Ethernet controller [0200]: Red Hat, Inc Virtio network device [1af4:1000]
> Subsystem: Red Hat, Inc Virtio network device [1af4:0001]
> Physical Slot: 2
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 10
> Region 0: I/O ports at c040 [size=32]
> Region 1: Memory at febc0000 (32-bit, non-prefetchable) [size=4K]
> Expansion ROM at feb80000 [disabled] [size=256K]
> Capabilities: <access denied>
> Kernel driver in use: virtio-pci
> Kernel modules: virtio_pci
>
> 00:03.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
> Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 11
> Region 4: I/O ports at c060 [size=32]
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci_hcd
>
> 00:03.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
> Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 11
> Region 4: I/O ports at c080 [size=32]
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci_hcd
>
> 00:03.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
> Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin C routed to IRQ 10
> Region 4: I/O ports at c0a0 [size=32]
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci_hcd
>
> 00:03.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
> Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin D routed to IRQ 10
> Region 0: Memory at febc1000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ehci-pci
> Kernel modules: ehci_pci
>
> 00:04.0 SCSI storage controller [0100]: Red Hat, Inc Virtio block device [1af4:1001]
> Subsystem: Red Hat, Inc Virtio block device [1af4:0002]
> Physical Slot: 4
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 11
> Region 0: I/O ports at c000 [size=64]
> Region 1: Memory at febc2000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: <access denied>
> Kernel driver in use: virtio-pci
> Kernel modules: virtio_pci
>
> 00:05.0 Unclassified device [00ff]: Red Hat, Inc Virtio memory balloon [1af4:1002]
> Subsystem: Red Hat, Inc Virtio memory balloon [1af4:0005]
> Physical Slot: 5
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 10
> Region 0: I/O ports at c0c0 [size=32]
> Kernel driver in use: virtio-pci
> Kernel modules: virtio_pci
>
> 00:06.0 Unclassified device [00ff]: Red Hat, Inc Virtio RNG [1af4:1005]
> Subsystem: Red Hat, Inc Virtio RNG [1af4:0004]
> Physical Slot: 6
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 10
> Region 0: I/O ports at c0e0 [size=32]
> Kernel driver in use: virtio-pci
> Kernel modules: virtio_pci
>
>
> ** USB devices:
> Bus 004 Device 002: ID 0627:0001 Adomax Technology Co., Ltd
> Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>
>
> -- System Information:
> Debian Release: stretch/sid
> APT prefers testing
> APT policy: (500, 'testing')
> Architecture: amd64 (x86_64)
>
> Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
> Shell: /bin/sh linked to /bin/dash
> Init: systemd (via /run/systemd/system)
>
> Versions of packages linux-image-4.8.0-1-amd64 depends on:
> ii initramfs-tools [linux-initramfs-tool] 0.125
> ii kmod 23-1
> ii linux-base 4.5
>
> Versions of packages linux-image-4.8.0-1-amd64 recommends:
> ii firmware-linux-free 3.4
> ii irqbalance 1.1.0-2
>
> Versions of packages linux-image-4.8.0-1-amd64 suggests:
> pn debian-kernel-handbook <none>
> ii grub-pc 2.02~beta3-3
> pn linux-doc-4.8 <none>
>
> Versions of packages linux-image-4.8.0-1-amd64 is related to:
> pn firmware-amd-graphics <none>
> pn firmware-atheros <none>
> pn firmware-bnx2 <none>
> pn firmware-bnx2x <none>
> pn firmware-brcm80211 <none>
> pn firmware-cavium <none>
> pn firmware-intel-sound <none>
> pn firmware-intelwimax <none>
> pn firmware-ipw2x00 <none>
> pn firmware-ivtv <none>
> pn firmware-iwlwifi <none>
> pn firmware-libertas <none>
> pn firmware-linux-nonfree <none>
> pn firmware-misc-nonfree <none>
> pn firmware-myricom <none>
> pn firmware-netxen <none>
> pn firmware-qlogic <none>
> pn firmware-realtek <none>
> pn firmware-samsung <none>
> pn firmware-siano <none>
> pn firmware-ti-connectivity <none>
> pn xen-hypervisor <none>
>
> -- no debconf information
Good luck!
Best Professional Regards.
--
Jose R R
http://metztli.it
---------------------------------------------------------------------------------------------
Download Debian-Reiser4 for AMD64 https://sf.net/projects/debian-reiser4/
---------------------------------------------------------------------------------------------
Try at no charge http://b2evolution.net for http://OpenShift.com PaaS
---------------------------------------------------------------------------------------------
from our GitHub http://Nepohualtzintzin.com repository. Cloud the easy way!
---------------------------------------------------------------------------------------------
Reply to: