Bug#838230: linux-image-3.16.0-4-686-pae: I/O on f2fs devices hangs until `sync` is run
Package: src:linux
Version: 3.16.36-1+deb8u1
Severity: normal
Dear Maintainer,
When I try to create a lot of files on an f2fs device (e.g. unpack a rootfs), the
process hangs in 'D' state shortly after the start, but running `sync` in a separate
terminal lets it lift off again and, eventually, finish successfully (I just leave
running `while sleep 5s; do sync; done` until everything is done).
Also, the system is generally less responsive while an f2fs device is mounted and files
are open on it (e.g. browser stops redrawing itself for long periods of time while not
consuming CPU), and, again, responsiveness is back if `while sleep 5s; do sync; done` is
running in background.
-- Package-specific info:
** Version:
Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.36-1+deb8u1 (2016-09-03)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=UUID=6452ebcc-a034-40e6-81a4-148e2ef17a59 ro quiet panic=10
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[120847.269890] usb 3-6.2: Product: Mass Storage Device
[120847.269894] usb 3-6.2: Manufacturer: Generic
[120847.269899] usb 3-6.2: SerialNumber: 058F0O1111B
[120847.270692] usb-storage 3-6.2:1.0: USB Mass Storage device detected
[120847.275062] scsi12 : usb-storage 3-6.2:1.0
[120848.272815] scsi 12:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
[120848.273416] sd 12:0:0:0: Attached scsi generic sg4 type 0
[120848.450180] sd 12:0:0:0: [sde] Attached SCSI removable disk
[120939.919814] sd 12:0:0:0: [sde] 30392320 512-byte logical blocks: (15.5 GB/14.4 GiB)
[120939.926453] sde: sde1 sde2
[120940.337194] FAT-fs (sde): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[120940.723348] EXT4-fs (sde1): mounting ext2 file system using the ext4 subsystem
[120940.786054] EXT4-fs (sde1): mounted filesystem without journal. Opts: (null)
[121360.375964] SysRq : Emergency Sync
[121360.385339] Emergency Sync complete
[121360.807974] SysRq : Emergency Sync
[121360.817575] Emergency Sync complete
[121496.564621] sd 12:0:0:0: [sde] 30392320 512-byte logical blocks: (15.5 GB/14.4 GiB)
[121496.571013] sde: sde1 sde2
[121496.704488] FAT-fs (sde): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[121496.708752] F2FS-fs (sde): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[121496.708756] F2FS-fs (sde): Can't find valid F2FS filesystem in 1th superblock
[121496.712902] F2FS-fs (sde): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[121496.712906] F2FS-fs (sde): Can't find valid F2FS filesystem in 2th superblock
[121496.996379] EXT4-fs (sde1): mounting ext2 file system using the ext4 subsystem
[121497.038357] EXT4-fs (sde1): mounted filesystem without journal. Opts: (null)
[121943.355141] SysRq : Emergency Sync
[121943.364349] Emergency Sync complete
[121943.547142] SysRq : Emergency Sync
[121943.559604] Emergency Sync complete
[121943.707142] SysRq : Emergency Sync
[121943.717696] Emergency Sync complete
[122116.079612] sd 12:0:0:0: [sde] 30392320 512-byte logical blocks: (15.5 GB/14.4 GiB)
[122116.086890] sde: sde1 sde2
[122116.222742] FAT-fs (sde): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[122116.227796] F2FS-fs (sde): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[122116.227801] F2FS-fs (sde): Can't find valid F2FS filesystem in 1th superblock
[122116.229377] F2FS-fs (sde): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[122116.229382] F2FS-fs (sde): Can't find valid F2FS filesystem in 2th superblock
[122116.340900] EXT4-fs (sde1): mounting ext2 file system using the ext4 subsystem
[122116.382596] EXT4-fs (sde1): mounted filesystem without journal. Opts: (null)
[127953.295985] sd 12:0:0:0: [sde] 30392320 512-byte logical blocks: (15.5 GB/14.4 GiB)
[127953.302502] sde: sde1 sde2
[127953.436741] FAT-fs (sde): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[127953.442612] F2FS-fs (sde): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[127953.442619] F2FS-fs (sde): Can't find valid F2FS filesystem in 1th superblock
[127953.446362] F2FS-fs (sde): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[127953.446370] F2FS-fs (sde): Can't find valid F2FS filesystem in 2th superblock
[127954.037768] EXT4-fs (sde1): mounting ext2 file system using the ext4 subsystem
[127954.101708] EXT4-fs (sde1): mounted filesystem without journal. Opts: (null)
[128535.533762] sd 12:0:0:0: [sde] 30392320 512-byte logical blocks: (15.5 GB/14.4 GiB)
[128535.540156] sde: sde1 sde2
[128535.676143] FAT-fs (sde): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[128535.682831] F2FS-fs (sde): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[128535.682835] F2FS-fs (sde): Can't find valid F2FS filesystem in 1th superblock
[128535.785890] F2FS-fs (sde): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[128535.785897] F2FS-fs (sde): Can't find valid F2FS filesystem in 2th superblock
[128535.865644] EXT4-fs (sde1): mounting ext2 file system using the ext4 subsystem
[128535.907718] EXT4-fs (sde1): mounted filesystem without journal. Opts: (null)
[128768.368029] usb 3-6.4: new high-speed USB device number 7 using ehci-pci
[128768.477284] usb 3-6.4: New USB device found, idVendor=058f, idProduct=6366
[128768.477291] usb 3-6.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[128768.477296] usb 3-6.4: Product: Flash Card Reader/Writer
[128768.477301] usb 3-6.4: Manufacturer: Generic
[128768.477305] usb 3-6.4: SerialNumber: 058F63666438
[128768.477736] usb-storage 3-6.4:1.0: USB Mass Storage device detected
[128768.478163] scsi13 : usb-storage 3-6.4:1.0
[128769.476722] scsi 13:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0
[128769.477248] sd 13:0:0:0: Attached scsi generic sg5 type 0
[128769.814093] sd 13:0:0:0: [sdf] 30535680 512-byte logical blocks: (15.6 GB/14.5 GiB)
[128769.815082] sd 13:0:0:0: [sdf] Write Protect is off
[128769.815088] sd 13:0:0:0: [sdf] Mode Sense: 03 00 00 00
[128769.817776] sd 13:0:0:0: [sdf] No Caching mode page found
[128769.817784] sd 13:0:0:0: [sdf] Assuming drive cache: write through
[128769.822355] sdf: sdf1
[128769.827093] sd 13:0:0:0: [sdf] Attached SCSI removable disk
[128770.021838] FAT-fs (sdf): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[128770.023843] F2FS-fs (sdf): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[128770.023847] F2FS-fs (sdf): Can't find valid F2FS filesystem in 1th superblock
[128770.025249] F2FS-fs (sdf): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[128770.025253] F2FS-fs (sdf): Can't find valid F2FS filesystem in 2th superblock
[128770.173259] FAT-fs (sdf1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[129710.585533] sd 12:0:0:0: [sde] 30392320 512-byte logical blocks: (15.5 GB/14.4 GiB)
[129710.592550] sde: sde1 sde2
[129710.856669] FAT-fs (sde): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[129710.858781] F2FS-fs (sde): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[129710.858787] F2FS-fs (sde): Can't find valid F2FS filesystem in 1th superblock
[129710.859279] F2FS-fs (sde): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[129710.859283] F2FS-fs (sde): Can't find valid F2FS filesystem in 2th superblock
[129711.139046] EXT4-fs (sde1): mounting ext2 file system using the ext4 subsystem
[129711.181375] EXT4-fs (sde1): mounted filesystem without journal. Opts: (null)
[133325.810816] sd 12:0:0:0: [sde] 30392320 512-byte logical blocks: (15.5 GB/14.4 GiB)
[133325.816581] sde: sde1 sde2
[133326.099950] FAT-fs (sde): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[133326.102731] F2FS-fs (sde): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[133326.102735] F2FS-fs (sde): Can't find valid F2FS filesystem in 1th superblock
[133326.103313] F2FS-fs (sde): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[133326.103317] F2FS-fs (sde): Can't find valid F2FS filesystem in 2th superblock
[133326.376331] EXT4-fs (sde1): mounting ext2 file system using the ext4 subsystem
[133326.418308] EXT4-fs (sde1): mounted filesystem without journal. Opts: (null)
** Model information
not available
** Loaded modules:
f2fs
xt_multiport
iptable_filter
ip_tables
snd_hrtimer
snd_seq_midi
snd_seq_midi_event
x_tables
snd_rawmidi
snd_seq
snd_seq_device
binfmt_misc
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
zram
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
nls_utf8
nls_cp437
vfat
fat
iTCO_wdt
iTCO_vendor_support
radeon
ttm
snd_hda_codec_analog
snd_hda_codec_generic
drm_kms_helper
drm
evdev
i2c_algo_bit
serio_raw
snd_hda_intel
lpc_ich
i2c_i801
i2c_core
snd_hda_controller
mfd_core
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_timer
snd
soundcore
shpchp
asus_atk0110
button
acpi_cpufreq
processor
thermal_sys
coretemp
loop
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
sha256_generic
ecb
cbc
algif_skcipher
af_alg
dm_crypt
dm_mod
hid_generic
usbhid
hid
sg
ata_generic
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_common
usb_storage
psmouse
ahci
libahci
pata_jmicron
libata
scsi_mod
r8169
mii
floppy
ehci_pci
uhci_hcd
ehci_hcd
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82P965/G965 Memory Controller Hub [8086:29a0] (rev 02)
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ea]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 82P965/G965 PCI Express Root Port [8086:29a1] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00008000-0000afff
Memory behind bridge: ff700000-ff7fffff
Prefetchable memory behind bridge: 00000000bfe00000-00000000dfdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at e000 [size=32]
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at e080 [size=32]
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at ffaff400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at ffaf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 80000000-803fffff
Prefetchable memory behind bridge: 00000000dfe00000-00000000dfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: ff900000-ff9fffff
Prefetchable memory behind bridge: 0000000080400000-00000000805fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: ff800000-ff8fffff
Prefetchable memory behind bridge: 0000000080600000-00000000807fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at dc00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at ffaff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller [8086:2810] (rev 02)
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 82801HB (ICH8) 4 port SATA Controller [AHCI mode] [8086:2824] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 45
Region 0: I/O ports at ec00 [size=8]
Region 1: I/O ports at e880 [size=4]
Region 2: I/O ports at e800 [size=8]
Region 3: I/O ports at e480 [size=4]
Region 4: I/O ports at e400 [size=32]
Region 5: Memory at ffaff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at 80800000 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV370 [Radeon X300/X550/X1050 Series] [1002:5b63] (prog-if 00 [VGA controller])
Subsystem: Tul Corporation / PowerColor Device [148c:2134]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at a000 [size=256]
Region 2: Memory at ff7f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at ff7c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
01:00.1 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] RV370 [Radeon X300/X550/X1050 Series] (Secondary) [1002:5b73]
Subsystem: Tul Corporation / PowerColor Device [148c:2135]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Region 0: Memory at ff7e0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
02:00.0 SATA controller [0106]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. P5B [JMB363] [1043:81e4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 5: Memory at ff8fe000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at ff8e0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
02:00.1 IDE interface [0101]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. P5B [JMB363] [1043:81e4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at bc00 [size=8]
Region 1: I/O ports at b880 [size=4]
Region 2: I/O ports at b800 [size=8]
Region 3: I/O ports at b480 [size=4]
Region 4: I/O ports at b400 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. P5B [1043:81aa]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 44
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at ff9ff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at ff9c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 003 Device 007: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 003 Device 006: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 003 Device 005: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 003 Device 004: ID 1058:0702 Western Digital Technologies, Inc. Passport External HDD
Bus 003 Device 002: ID 1058:1042 Western Digital Technologies, Inc.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 040b:2000 Weltrend Semiconductor
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 8.5
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Foreign Architectures: armhf
Kernel: Linux 3.16.0-4-686-pae (SMP w/2 CPU cores)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-4-686-pae depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.120+deb8u2
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-3.16.0-4-686-pae recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
ii libc6-i686 2.19-18+deb8u4
Versions of packages linux-image-3.16.0-4-686-pae suggests:
pn debian-kernel-handbook <none>
ii extlinux 3:6.03+dfsg-5+deb8u1
ii grub-pc 2.02~beta2-22+deb8u1
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-4-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.43
pn xen-hypervisor <none>
-- debconf information excluded
Reply to: