Bug#838206: linux-image-4.7.0-1-amd64: [Linux Kernel 4.7] Power issue: Intel i7 CPU frequency get maxed on display idle
Package: src:linux
Version: 4.7.2-1+s1
Severity: important
Hello,
I'm facing a power issue with the Linux 4.7 kernel.
Every time the system goes idle (the configured delay passes and the display
goes black), the frequency of all cores get maxed, even if all cores are idle.
Evident symptoms are the fan spinning loudly and the errors logged in journal
stating the thermal threshold being surpassed and the CPU throttled.
In detail, the frequency of all cores raises from ~800 MHz to 2.6 GHz for all 8
cores of my i7. I can reproduce the behavior 100% of times, by connecting via
ssh to the affected system and launching powertop.
The issue does not exists in Linux 4.6 (to wich I will stick for now), so I
guess the problem resides in kernel, not in other packages.
You have all system information here below (gathered by repotbug). Ask any
further info if needed. Thank you!
--
Alessio Gaeta
-- Package-specific info:
** Version:
Linux version 4.7.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.1 20160803 (Debian 5.4.1-1) ) #1 SMP Debian 4.7.2-1 (2016-08-28)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.7.0-1-amd64 root=UUID=325f7845-cb20-4f45-9328-6a9ce9133f5a ro acpi_backlight=vendor quiet
** Tainted: OE (12288)
* Out-of-tree module has been loaded.
* Unsigned module has been loaded (currently expected).
** Kernel log:
[ 4.649062] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.649104] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 4.649285] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.650851] asus_wmi: ASUS WMI generic driver loaded
[ 4.652548] asus_wmi: Initialization: 0x1
[ 4.652753] asus_wmi: SFUN value: 0x1a0af7
[ 4.653693] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input17
[ 4.662844] asus_wmi: Number of fans: 0
[ 4.669120] acpi_call: module verification failed: signature and/or required key missing - tainting kernel
[ 4.677496] Non-volatile memory driver v1.3
[ 4.718296] ath: phy0: Enable LNA combining
[ 4.720944] ath: phy0: ASPM enabled: 0x42
[ 4.720953] ath: EEPROM regdomain: 0x60
[ 4.720956] ath: EEPROM indicates we should expect a direct regpair map
[ 4.720961] ath: Country alpha2 being used: 00
[ 4.720964] ath: Regpair used: 0x60
[ 4.725655] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.725958] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900010c0000, irq=17
[ 4.750243] [drm] Memory usable by graphics device = 2048M
[ 4.750248] [drm] Replacing VGA console driver
[ 4.750890] Console: switching to colour dummy device 80x25
[ 4.756320] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.756323] [drm] Driver supports precise vblank timestamp query.
[ 4.758406] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 4.758974] intel_rapl: Found RAPL domain package
[ 4.758977] intel_rapl: Found RAPL domain core
[ 4.758979] intel_rapl: Found RAPL domain uncore
[ 4.778466] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 4.778897] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4c/LNXVIDEO:00/input/input18
[ 4.779487] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.779909] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input19
[ 4.784877] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.892652] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 4.892659] [drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0
[ 4.893710] fbcon: inteldrmfb (fb0) is primary device
[ 4.923758] random: nonblocking pool is initialized
[ 4.982716] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 5.099244] Console: switching to colour frame buffer device 170x48
[ 5.101549] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 5.128538] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 5.128596] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 5.128647] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 5.309850] bbswitch: version 0.8
[ 5.309860] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 5.309866] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEGR.GFX0
[ 5.309881] ACPI Warning: \_SB.PCI0.PEGR.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 5.310017] bbswitch: detected an Optimus _DSM function
[ 5.310031] pci 0000:01:00.0: enabling device (0000 -> 0003)
[ 5.310090] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 5.310788] bbswitch: disabling discrete graphics
[ 5.310798] ACPI Warning: \_SB.PCI0.PEGR.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 6.064493] media: Linux media interface: v0.10
[ 6.074948] Linux video capture interface: v2.00
[ 6.088875] uvcvideo: Found UVC 1.00 device USB 2.0 UVC VGA WebCam (13d3:5710)
[ 6.095119] uvcvideo 1-1.2:1.0: Entity type for entity Extension 7 was not initialized!
[ 6.095123] uvcvideo 1-1.2:1.0: Entity type for entity Processing 2 was not initialized!
[ 6.095125] uvcvideo 1-1.2:1.0: Entity type for entity Camera 1 was not initialized!
[ 6.095127] uvcvideo 1-1.2:1.0: Entity type for entity Extension 4 was not initialized!
[ 6.095215] input: USB 2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input21
[ 6.095286] usbcore: registered new interface driver uvcvideo
[ 6.095287] USB Video Class driver (1.1.1)
[ 6.264949] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.265749] r8169 0000:04:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw
[ 6.405751] r8169 0000:04:00.0 eth0: link down
[ 6.405797] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.409357] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6.424414] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6.446729] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6.516685] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6.603280] usb 2-1.3.1: Warning! Unlikely big volume range (=9472), cval->res is probably wrong.
[ 6.603284] usb 2-1.3.1: [13] FU [PCM Playback Volume] ch = 2, val = -9473/-1/1
[ 6.603575] usbcore: registered new interface driver snd-usb-audio
[ 7.525321] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7.569815] wlan0: authenticate with a4:b1:e9:5f:ce:93
[ 7.583286] wlan0: send auth to a4:b1:e9:5f:ce:93 (try 1/3)
[ 7.585671] wlan0: authenticated
[ 7.590081] wlan0: associate with a4:b1:e9:5f:ce:93 (try 1/3)
[ 7.593423] wlan0: RX AssocResp from a4:b1:e9:5f:ce:93 (capab=0x411 status=0 aid=5)
[ 7.593572] wlan0: associated
[ 7.593610] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 7.623636] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 12.110297] vboxdrv: Found 8 processor cores
[ 12.130146] vboxdrv: TSC mode is Invariant, tentative frequency 1995442352 Hz
[ 12.130149] vboxdrv: Successfully loaded version 5.1.6_Debian (interface 0x00260000)
[ 12.135113] VBoxNetFlt: Successfully started.
[ 12.139808] VBoxNetAdp: Successfully started.
[ 12.144366] VBoxPciLinuxInit
[ 12.145929] vboxpci: IOMMU not found (not registered)
[ 12.357223] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[ 12.370783] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[ 25.103980] fuse init (API version 7.25)
[ 286.804908] Bluetooth: Core ver 2.21
[ 286.804923] NET: Registered protocol family 31
[ 286.804924] Bluetooth: HCI device and connection manager initialized
[ 286.804928] Bluetooth: HCI socket layer initialized
[ 286.804931] Bluetooth: L2CAP socket layer initialized
[ 286.804936] Bluetooth: SCO socket layer initialized
[ 644.025538] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 644.025542] Bluetooth: BNEP filters: protocol multicast
[ 644.025547] Bluetooth: BNEP socket layer initialized
** Model information
sys_vendor: ASUSTeK Computer Inc.
product_name: K53SV
product_version: 1.0
chassis_vendor: ASUSTeK Computer Inc.
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: K53SV.324
board_vendor: ASUSTeK Computer Inc.
board_name: K53SV
board_version: 1.0
** Loaded modules:
bnep
bluetooth
fuse
pci_stub
vboxpci(OE)
vboxnetadp(OE)
vboxnetflt(OE)
vboxdrv(OE)
drbg
ansi_cprng
ctr
ccm
snd_usb_audio
snd_usbmidi_lib
snd_rawmidi
snd_seq_device
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
videobuf2_core
videodev
rtsx_usb_ms
memstick
media
cpufreq_userspace
cpufreq_conservative
cpufreq_powersave
cpufreq_stats
bbswitch(OE)
binfmt_misc
intel_rapl
x86_pkg_temp_thermal
intel_powerclamp
arc4
nvram
msr
coretemp
ath9k
acpi_call(OE)
ath9k_common
ath9k_hw
ath
asus_nb_wmi
asus_wmi
iTCO_wdt
iTCO_vendor_support
sparse_keymap
mxm_wmi
mac80211
snd_hda_codec_hdmi
cfg80211
snd_hda_codec_realtek
snd_hda_codec_generic
rfkill
i915
snd_hda_intel
kvm_intel
snd_hda_codec
snd_hda_core
kvm
snd_hwdep
drm_kms_helper
snd_pcm_oss
snd_mixer_oss
drm
snd_pcm
snd_timer
irqbypass
evdev
joydev
crct10dif_pclmul
crc32_pclmul
snd
ghash_clmulni_intel
serio_raw
pcspkr
soundcore
i2c_i801
sg
i2c_algo_bit
lpc_ich
shpchp
wmi
battery
video
ac
button
tpm_tis
tpm
loop
ecryptfs
cbc
hmac
encrypted_keys
parport_pc
ppdev
lp
parport
sunrpc
ip_tables
x_tables
autofs4
hid_logitech
ff_memless
usbhid
hid
ext4
ecb
crc16
jbd2
crc32c_generic
mbcache
rtsx_usb_sdmmc
mmc_core
rtsx_usb
mfd_core
sd_mod
crc32c_intel
ahci
libahci
aesni_intel
libata
aes_x86_64
glue_helper
lrw
ehci_pci
gf128mul
ehci_hcd
ablk_helper
cryptd
scsi_mod
usbcore
psmouse
r8169
mii
usb_common
thermal
fjes
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
Subsystem: ASUSTeK Computer Inc. 2nd Generation Core Processor Family DRAM Controller [1043:1277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: dc000000-dd0fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller])
DeviceName: Onboard IGD
Subsystem: ASUSTeK Computer Inc. 2nd Generation Core Processor Family Integrated Graphics Controller [1043:15f2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 31
Region 0: Memory at dd400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at e000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. 6 Series/C200 Series Chipset Family USB Enhanced Host Controller [1043:1277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at df608000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
DeviceName: Onboard Audio
Subsystem: ASUSTeK Computer Inc. 6 Series/C200 Series Chipset Family High Definition Audio Controller [1043:1ac3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
Region 0: Memory at df600000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: dec00000-df5fffff
Prefetchable memory behind bridge: 00000000d3700000-00000000d40fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 26
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: de200000-debfffff
Prefetchable memory behind bridge: 00000000d2c00000-00000000d35fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 27
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: dd800000-de1fffff
Prefetchable memory behind bridge: 00000000d2100000-00000000d2afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. 6 Series/C200 Series Chipset Family USB Enhanced Host Controller [1043:1277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at df607000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 05)
Subsystem: ASUSTeK Computer Inc. HM65 Express Chipset Family LPC Controller [1043:1277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [1043:1277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 29
Region 0: I/O ports at e0b0 [size=8]
Region 1: I/O ports at e0a0 [size=4]
Region 2: I/O ports at e090 [size=8]
Region 3: I/O ports at e080 [size=4]
Region 4: I/O ports at e060 [size=32]
Region 5: Memory at df606000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)
Subsystem: ASUSTeK Computer Inc. 6 Series/C200 Series Chipset Family SMBus Controller [1043:1277]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at df605000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at e040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108M [GeForce GT 540M] [10de:0df4] (rev ff) (prog-if ff)
!!! Unknown header type 7f
Kernel modules: nvidia
03:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: AzureWave AW-NE785 / AW-NE785H 802.11bgn Wireless Full or Half-size Mini PCIe Card [1a3b:1089]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at de200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
Kernel modules: ath9k
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
Subsystem: ASUSTeK Computer Inc. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [1043:1277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: I/O ports at a000 [size=256]
Region 2: Memory at d2104000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d2100000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
** USB devices:
Bus 002 Device 005: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
Bus 002 Device 004: ID 0d8c:0103 C-Media Electronics, Inc. CM102-A+/102S+ Audio Controller
Bus 002 Device 003: ID 0451:8044 Texas Instruments, Inc.
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0bda:0139 Realtek Semiconductor Corp. RTS5139 Card Reader Controller
Bus 001 Device 003: ID 13d3:5710 IMC Networks UVC VGA Webcam
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.7.0-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=it_IT.utf8, LC_CTYPE=it_IT.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.7.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.125
ii kmod 22-1.1
ii linux-base 4.5
Versions of packages linux-image-4.7.0-1-amd64 recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2
Versions of packages linux-image-4.7.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-36
pn linux-doc-4.7 <none>
Versions of packages linux-image-4.7.0-1-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20160110-1
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: