Bug#823551: linux-image-4.5.0-2-amd64: [graphdriver] prior storage driver "aufs" failed: driver not supported
Package: src:linux
Version: 4.5.2-1
Severity: normal
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
Docker doesn't start because of missing aufs module
root@koeck:/home/joblack# docker -d
Warning: '-d' is deprecated, it will be removed soon. See usage.
WARN[0000] please use 'docker daemon' instead.
INFO[0000] Listening for HTTP on unix (/var/run/docker.sock)
ERRO[0000] [graphdriver] prior storage driver "aufs" failed: driver not supported
FATA[0000] Error starting daemon: error initializing graphdriver: driver not supported
*** End of the template - remove these template lines ***
-- Package-specific info:
** Version:
Linux version 4.5.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20160424 (Debian 5.3.1-16) ) #1 SMP Debian 4.5.2-1 (2016-04-28)
** Command line:
BOOT_IMAGE=/vmlinuz-4.5.0-2-amd64 root=/dev/mapper/koeck--vg-root ro quiet
** Tainted: E (8192)
* Unsigned module has been loaded (currently expected).
** Kernel log:
[ 1.221592] usb usb1: Product: UHCI Host Controller
[ 1.221593] usb usb1: Manufacturer: Linux 4.5.0-2-amd64 uhci_hcd
[ 1.221594] usb usb1: SerialNumber: 0000:00:01.2
[ 1.221750] hub 1-0:1.0: USB hub found
[ 1.221758] hub 1-0:1.0: 2 ports detected
[ 1.255280] FDC 0 is a S82078B
[ 1.255564] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input3
[ 1.431614] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input2
[ 1.466990] vda: vda1 vda2 < vda5 >
[ 1.672686] device-mapper: uevent: version 1.0.3
[ 1.673103] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 1.684118] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[ 1.944765] usb 1-1: New USB device found, idVendor=0627, idProduct=0001
[ 1.944773] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
[ 1.944776] usb 1-1: Product: QEMU USB Tablet
[ 1.944779] usb 1-1: Manufacturer: QEMU 1.0
[ 1.944782] usb 1-1: SerialNumber: 42
[ 1.957997] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.980179] usbcore: registered new interface driver usbhid
[ 1.980183] usbhid: USB HID core driver
[ 1.985869] input: QEMU 1.0 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input4
[ 1.986205] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 1.0 QEMU USB Tablet] on usb-0000:00:01.2-1/input0
[ 2.000152] tsc: Refined TSC clocksource calibration: 2600.048 MHz
[ 2.000160] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a69760b8, max_idle_ns: 440795224253 ns
[ 18.371602] random: nonblocking pool is initialized
[ 25.212977] NET: Registered protocol family 38
[ 44.451223] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 44.597240] PM: Starting manual resume from disk
[ 44.597246] PM: Hibernation image partition 253:2 present
[ 44.597247] PM: Looking for hibernation image.
[ 44.597519] PM: Image not found (code -22)
[ 44.597521] PM: Hibernation image not present or could not be loaded.
[ 44.643922] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 44.678305] XFS (dm-1): Mounting V4 Filesystem
[ 44.831575] XFS (dm-1): Ending clean mount
[ 45.034134] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 45.034188] systemd[1]: Detected virtualization bochs.
[ 45.034193] systemd[1]: Detected architecture x86-64.
[ 45.035658] systemd[1]: Set hostname to <koeck>.
[ 45.177169] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 45.177419] systemd[1]: Created slice System Slice.
[ 45.177476] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 45.177518] systemd[1]: Listening on udev Kernel Socket.
[ 45.177622] systemd[1]: Listening on Journal Audit Socket.
[ 45.177661] systemd[1]: Listening on Syslog Socket.
[ 45.177802] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 45.177816] systemd[1]: Reached target Remote File Systems (Pre).
[ 45.177866] systemd[1]: Listening on udev Control Socket.
[ 45.178043] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 45.178180] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[ 45.178221] systemd[1]: Listening on LVM2 poll daemon socket.
[ 45.178245] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 45.178282] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 45.178322] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 45.178354] systemd[1]: Listening on Journal Socket (/dev/log).
[ 45.178392] systemd[1]: Listening on Journal Socket.
[ 45.188276] systemd[1]: Mounting Huge Pages File System...
[ 45.189815] systemd[1]: Starting Load Kernel Modules...
[ 45.190889] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 45.192835] systemd[1]: Starting Set the console keyboard layout...
[ 45.194674] systemd[1]: Starting Journal Service...
[ 45.196181] systemd[1]: Mounting POSIX Message Queue File System...
[ 45.197713] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 45.198605] systemd[1]: Mounting Debug File System...
[ 45.198709] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 45.198768] systemd[1]: Reached target Remote File Systems.
[ 45.199013] systemd[1]: Created slice User and Session Slice.
[ 45.199031] systemd[1]: Reached target Slices.
[ 45.200442] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 45.208798] systemd[1]: Mounted Huge Pages File System.
[ 45.213543] systemd[1]: Started Load Kernel Modules.
[ 45.214544] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 45.218145] systemd[1]: Started Remount Root and Kernel File Systems.
[ 45.218767] systemd[1]: Mounted Debug File System.
[ 45.223565] systemd[1]: Mounted POSIX Message Queue File System.
[ 45.245735] systemd[1]: Started Journal Service.
[ 45.314846] systemd-journald[276]: Received request to flush runtime journal from PID 1
[ 45.397827] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 45.397834] ACPI: Power Button [PWRF]
[ 45.411428] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
[ 45.432903] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 45.446586] [drm] Initialized drm 1.1.0 20060810
[ 45.496818] [TTM] Zone kernel: Available graphics memory: 6154068 kiB
[ 45.496819] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 45.496819] [TTM] Initializing pool allocator
[ 45.496824] [TTM] Initializing DMA pool allocator
[ 45.497320] [drm] fb mappable at 0xFC000000
[ 45.497320] [drm] vram aper at 0xFC000000
[ 45.497321] [drm] size 33554432
[ 45.497321] [drm] fb depth is 24
[ 45.497322] [drm] pitch is 3072
[ 45.497353] ppdev: user-space parallel port driver
[ 45.514182] fbcon: cirrusdrmfb (fb0) is primary device
[ 45.518849] Adding 25165820k swap on /dev/mapper/koeck--vg-swap_1. Priority:-1 extents:1 across:25165820k FS
[ 45.524047] pmd_set_huge: Cannot satisfy [mem 0xfc000000-0xfc200000] with a huge-page mapping due to MTRR override.
[ 45.536335] Console: switching to colour frame buffer device 128x48
[ 45.547593] cirrus 0000:00:02.0: fb0: cirrusdrmfb frame buffer device
[ 45.596061] [drm] Initialized cirrus 1.0.0 20110418 for 0000:00:02.0 on minor 0
[ 46.368549] EXT4-fs (vda1): mounting ext2 file system using the ext4 subsystem
[ 46.370874] EXT4-fs (vda1): mounted filesystem without journal. Opts: (null)
** Model information
sys_vendor: Bochs
product_name: Bochs
product_version:
chassis_vendor: Bochs
chassis_version:
bios_vendor: Bochs
bios_version: Bochs
** Loaded modules:
ext4(E)
ecb(E)
lrw(E)
glue_helper(E)
ablk_helper(E)
cryptd(E)
aes_x86_64(E)
crc16(E)
mbcache(E)
jbd2(E)
kvm_intel(E)
kvm(E)
cirrus(E)
ttm(E)
ppdev(E)
drm_kms_helper(E)
drm(E)
acpi_cpufreq(E)
evdev(E)
joydev(E)
pcspkr(E)
tpm_tis(E)
tpm(E)
serio_raw(E)
parport_pc(E)
parport(E)
irqbypass(E)
processor(E)
virtio_balloon(E)
i2c_piix4(E)
8250_fintek(E)
button(E)
autofs4(E)
xfs(E)
libcrc32c(E)
crc32c_generic(E)
hmac(E)
drbg(E)
ansi_cprng(E)
xts(E)
gf128mul(E)
algif_skcipher(E)
af_alg(E)
hid_generic(E)
usbhid(E)
hid(E)
dm_crypt(E)
dm_mod(E)
ata_generic(E)
virtio_net(E)
virtio_blk(E)
uhci_hcd(E)
ata_piix(E)
ehci_hcd(E)
libata(E)
psmouse(E)
virtio_pci(E)
virtio_ring(E)
usbcore(E)
virtio(E)
scsi_mod(E)
usb_common(E)
floppy(E)
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet static
address 178.254.20.91
netmask 255.255.255.0
network 178.254.20.0
broadcast 178.254.20.255
gateway 178.254.20.1
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 178.254.16.141 178.254.16.151
dns-search info
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 52:54:01:00:00:48 brd ff:ff:ff:ff:ff:ff
inet 178.254.20.91/24 brd 178.254.20.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::5054:1ff:fe00:48/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
eth0: 3120238 39449 0 0 0 0 0 0 1683656 3443 0 0 0 0 0 0
lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
Forwarding: 2
5029 total packets received
2024 with invalid addresses
0 forwarded
0 incoming packets discarded
3004 incoming packets delivered
3433 requests sent out
Icmp:
2 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
echo requests: 2
11 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 9
echo replies: 2
IcmpMsg:
InType8: 2
OutType0: 2
OutType3: 9
Tcp:
13 active connections openings
2 passive connection openings
1 failed connection attempts
0 connection resets received
1 connections established
2849 segments received
3683 segments send out
29 segments retransmited
0 bad segments received.
18 resets sent
Udp:
41 packets received
9 packets to unknown port received.
0 packet receive errors
44 packets sent
0 receive buffer errors
0 send buffer errors
IgnoredMulti: 103
UdpLite:
TcpExt:
1 resets received for embryonic SYN_RECV sockets
7 TCP sockets finished time wait in fast timer
30 delayed acks sent
Quick ack mode was activated 5 times
2 packets directly queued to recvmsg prequeue.
TCPDirectCopyFromPrequeue: 2
373 packet headers predicted
1010 acknowledgments not containing data payload received
82 predicted acknowledgments
TCPSackRecovery: 3
2 congestion windows fully recovered without slow start
TCPDSACKUndo: 1
3 fast retransmits
TCPLossProbes: 26
TCPDSACKOldSent: 5
TCPDSACKRecv: 29
TCPDSACKIgnoredNoUndo: 12
TCPSackShiftFallback: 5
TCPRcvCoalesce: 116
TCPOFOQueue: 21
TCPOrigDataSent: 3356
TCPHystartDelayDetect: 1
TCPHystartDelayCwnd: 16
TCPACKSkippedSeq: 3
IpExt:
InBcastPkts: 103
InOctets: 984590
OutOctets: 1634926
InBcastOctets: 21084
InNoECTPkts: 5035
InECT0Pkts: 1
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02)
Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000]
Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.1 IDE interface [0101]: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] [8086:7010] (prog-if 80 [Master])
Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
Region 4: I/O ports at c0a0 [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic
00:01.2 USB controller [0c03]: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] [8086:7020] (rev 01) (prog-if 00 [UHCI])
Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at c040 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:01.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 03)
Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 9
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4
00:02.0 VGA compatible controller [0300]: Cirrus Logic GD 5446 [1013:00b8] (prog-if 00 [VGA controller])
Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
Physical Slot: 2
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fc000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at febf0000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at febd0000 [disabled] [size=64K]
Kernel driver in use: cirrus
Kernel modules: cirrusfb, cirrus
00:03.0 Ethernet controller [0200]: Red Hat, Inc Virtio network device [1af4:1000]
Subsystem: Red Hat, Inc Virtio network device [1af4:0001]
Physical Slot: 3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at c060 [size=32]
Region 1: Memory at febf1000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at febe0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: virtio-pci
Kernel modules: virtio_pci
00:04.0 SCSI storage controller [0100]: Red Hat, Inc Virtio block device [1af4:1001]
Subsystem: Red Hat, Inc Virtio block device [1af4:0002]
Physical Slot: 4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c000 [size=64]
Region 1: Memory at febf2000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: virtio-pci
Kernel modules: virtio_pci
00:05.0 RAM memory [0500]: Red Hat, Inc Virtio memory balloon [1af4:1002]
Subsystem: Red Hat, Inc Virtio memory balloon [1af4:0005]
Physical Slot: 5
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at c080 [size=32]
Kernel driver in use: virtio-pci
Kernel modules: virtio_pci
** USB devices:
Bus 001 Device 002: ID 0627:0001 Adomax Technology Co., Ltd
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.5.0-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.5.0-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.59
ii initramfs-tools [linux-initramfs-tool] 0.125
ii kmod 22-1.1
ii linux-base 4.0
Versions of packages linux-image-4.5.0-2-amd64 recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2
Versions of packages linux-image-4.5.0-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-36
pn linux-doc-4.5 <none>
Versions of packages linux-image-4.5.0-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-4.5.0-2-amd64/prerm/removing-running-kernel-4.5.0-2-amd64: true
Reply to: