Your message dated Mon, 02 May 2016 21:26:38 +0200 with message-id <1462217198.17662.77.camel@decadent.org.uk> and subject line Re: Bug#822117: Update solved issue has caused the Debian Bug report #822117, regarding linux-image-4.4.0-0.bpo.1-amd64: HP ProBook 470 G2 fails to suspend when battery is taken out to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 822117: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=822117 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-4.4.0-0.bpo.1-amd64: HP ProBook 470 G2 fails to suspend when battery is taken out
- From: Jakob Wiedner <koutsch@gmx.net>
- Date: Thu, 21 Apr 2016 14:31:31 +0200
- Message-id: <20160421123131.1923.57403.reportbug@koutschnotebook>
Package: src:linux Version: 4.4.6-1~bpo8+1 Severity: important Tags: newcomer Dear Maintainer, since upgrading to the backports kernel 4.4 my Manufacturer: Hewlett-Packard Product Name: HP ProBook 470 G2 Version: A3009DD10303 fails to suspend when I put out the battery. Only the monitor turns off but the laptop keeps on running. When the battery is in, it works as expected. When I try to wake it up, it stays unresponsive and the only way to turn it on again is to restart it using the starter switch. -- Package-specific info: ** Version: Linux version 4.4.0-0.bpo.1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.4.6-1~bpo8+1 (2016-03-20) ** Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-0.bpo.1-amd64 root=UUID=b93cb965-8717-4cb2-b3f1-79962a83de1d ro quiet ** Tainted: W (512) * Taint on warning. ** Kernel log: [ 19.892528] Bluetooth: SCO socket layer initialized [ 19.913650] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input15 [ 19.914647] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 19.916820] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16 [ 19.916893] [Firmware Bug]: ACPI(DGFX) defines _DOD but not _DOS [ 19.917123] ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no) [ 19.917200] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:40/LNXVIDEO:01/input/input17 [ 19.917249] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0 [ 19.917361] [drm] initializing kernel modesetting (TOPAZ 0x1002:0x6901 0x103C:0x224A 0x00). [ 19.917373] [drm] register mmio base: 0xD0400000 [ 19.917374] [drm] register mmio size: 262144 [ 19.917378] [drm] doorbell mmio base: 0xB0000000 [ 19.917378] [drm] doorbell mmio size: 2097152 [ 19.917388] vga_switcheroo: enabled [ 19.917475] ATPX version 1, functions 0x00000003 [ 19.922032] ATOM BIOS: HP [ 19.922045] [drm] GPU not posted. posting now... [ 19.925704] [drm] Changing default dispclk from 0Mhz to 600Mhz [ 19.988449] amdgpu 0000:0a:00.0: firmware: failed to load amdgpu/topaz_mc.bin (-2) [ 19.988460] amdgpu 0000:0a:00.0: Direct firmware load for amdgpu/topaz_mc.bin failed with error -2 [ 19.988464] cik_mc: Failed to load firmware "amdgpu/topaz_mc.bin" [ 19.988499] [drm:gmc_v7_0_sw_init [amdgpu]] *ERROR* Failed to load mc firmware! [ 19.988507] amdgpu 0000:0a:00.0: Fatal error during GPU init [ 19.988512] [drm] amdgpu: finishing device. [ 19.988514] [TTM] Memory type 2 has not been initialized [ 19.988560] vga_switcheroo: disabled [ 19.988807] amdgpu: probe of 0000:0a:00.0 failed with error -2 [ 20.154333] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 20.154334] fbcon: inteldrmfb (fb0) is primary device [ 20.163015] iTCO_vendor_support: vendor-support=0 [ 20.192212] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 20.192256] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 20.192379] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 20.225873] usbcore: registered new interface driver btusb [ 20.227452] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 20.227453] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin [ 20.275653] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8723b_fw.bin [ 20.276458] Bluetooth: hci0: rom_version status=0 version=1 [ 20.324523] input: HP WMI hotkeys as /devices/virtual/input/input18 [ 20.342644] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 20.342646] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 20.342647] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 20.342648] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 20.342649] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 20.342651] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19 [ 20.342652] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 20.347651] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20 [ 20.347704] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21 [ 20.360013] media: Linux media interface: v0.10 [ 20.553404] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19 [ 20.553741] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input22 [ 20.553816] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input23 [ 20.690349] Linux video capture interface: v2.00 [ 20.805481] rtl8723be: Using firmware rtlwifi/rtl8723befw.bin [ 20.864753] rtl8723be 0000:09:00.0: firmware: direct-loading firmware rtlwifi/rtl8723befw.bin [ 20.899894] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 20.900125] rtlwifi: rtlwifi: wireless switch is on [ 21.146622] uvcvideo: Found UVC 1.00 device HP HD Webcam (04f2:b3c8) [ 21.149329] input: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input24 [ 21.149404] usbcore: registered new interface driver uvcvideo [ 21.149405] USB Video Class driver (1.1.1) [ 21.293532] AVX2 version of gcm_enc/dec engaged. [ 21.293532] AES CTR mode by8 optimization enabled [ 21.517711] Console: switching to colour frame buffer device 200x56 [ 21.780884] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 21.843556] systemd-journald[212]: Received request to flush runtime journal from PID 1 [ 21.937318] cfg80211: World regulatory domain updated: [ 21.937323] cfg80211: DFS Master region: unset [ 21.937324] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 21.937327] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 21.937329] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 21.937331] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 21.937333] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 21.937335] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 21.937337] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 21.937339] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 21.937341] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 23.199058] Adding 3868668k swap on /dev/sda5. Priority:-1 extents:1 across:3868668k FS [ 23.768987] intel_rapl: Found RAPL domain package [ 23.768995] intel_rapl: Found RAPL domain core [ 23.768999] intel_rapl: Found RAPL domain uncore [ 23.769002] intel_rapl: Found RAPL domain dram [ 24.592099] RPC: Registered named UNIX socket transport module. [ 24.592102] RPC: Registered udp transport module. [ 24.592103] RPC: Registered tcp transport module. [ 24.592103] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 24.635981] FS-Cache: Loaded [ 24.710341] FS-Cache: Netfs 'nfs' registered for caching [ 24.777259] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 31.692919] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 31.692923] Bluetooth: BNEP filters: protocol multicast [ 31.692929] Bluetooth: BNEP socket layer initialized [ 34.272973] r8169 0000:08:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-3.fw [ 34.283499] r8169 0000:08:00.0 eth0: link down [ 36.611492] wlan0: authenticate with 64:66:b3:8b:b4:44 [ 36.622262] wlan0: send auth to 64:66:b3:8b:b4:44 (try 1/3) [ 36.625895] wlan0: authenticated [ 36.629342] wlan0: associate with 64:66:b3:8b:b4:44 (try 1/3) [ 36.634056] wlan0: RX AssocResp from 64:66:b3:8b:b4:44 (capab=0x31 status=0 aid=4) [ 36.634573] wlan0: associated ** Model information sys_vendor: Hewlett-Packard product_name: HP ProBook 470 G2 product_version: A3009DD10303 chassis_vendor: Hewlett-Packard chassis_version: bios_vendor: Hewlett-Packard bios_version: M74 Ver. 01.03 board_vendor: Hewlett-Packard board_name: 2249 board_version: KBC Version 67.22 ** Loaded modules: ctr ccm binfmt_misc bnep nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc intel_rapl iosf_mbi x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul sha256_ssse3 sha256_generic hmac drbg ansi_cprng aesni_intel aes_x86_64 uvcvideo videobuf2_vmalloc videobuf2_memops lrw videobuf2_v4l2 arc4 videobuf2_core rtl8723be gf128mul glue_helper v4l2_common videodev ablk_helper cryptd media snd_hda_codec_hdmi snd_hda_codec_realtek hp_wmi sparse_keymap btcoexist btusb iTCO_wdt btrtl iTCO_vendor_support btbcm rtl8723_common rtl_pci snd_hda_codec_generic rtlwifi btintel snd_hda_intel mac80211 snd_hda_codec bluetooth snd_hda_core amdkfd i915 amdgpu snd_hwdep snd_pcm_oss ttm snd_mixer_oss cfg80211 rfkill pcspkr joydev snd_pcm rtsx_pci_ms memstick snd_timer evdev drm_kms_helper drm snd serio_raw battery video wmi 8250_fintek hp_accel lis3lv02d input_polldev hp_wireless ac intel_smartconnect tpm_infineon button shpchp mei_me lpc_ich i2c_algo_bit soundcore tpm_tis mei tpm processor fuse parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 hid_generic usbhid hid sg sr_mod cdrom sd_mod rtsx_pci_sdmmc mmc_core ahci libahci libata crc32c_intel psmouse r8169 mii scsi_mod ehci_pci ehci_hcd xhci_pci xhci_hcd rtsx_pci mfd_core usbcore usb_common thermal fjes ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller [8086:0a04] (rev 0b) Subsystem: Hewlett-Packard Company Device [103c:2249] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: hsw_uncore 00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 0b) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:2249] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 50 Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 8000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio Controller [8086:0a0c] (rev 0b) Subsystem: Hewlett-Packard Company Device [103c:2249] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 52 Region 0: Memory at d0910000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC [8086:9c31] (rev 04) (prog-if 30 [XHCI]) Subsystem: Hewlett-Packard Company Device [103c:2249] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 46 Region 0: Memory at d0900000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 00:16.0 Communication controller [0780]: Intel Corporation 8 Series HECI #0 [8086:9c3a] (rev 04) Subsystem: Hewlett-Packard Company Device [103c:2249] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 49 Region 0: Memory at d0919000 (64-bit, non-prefetchable) [size=32] Capabilities: <access denied> Kernel driver in use: mei_me 00:1b.0 Audio device [0403]: Intel Corporation 8 Series HD Audio Controller [8086:9c20] (rev 04) Subsystem: Hewlett-Packard Company Device [103c:2249] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 51 Region 0: Memory at d0914000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 1 [8086:9c10] (rev e4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=06, sec-latency=0 Memory behind bridge: d0800000-d08fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 2 [8086:9c12] (rev e4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00006000-00007fff Memory behind bridge: d0700000-d07fffff Prefetchable memory behind bridge: 000000009fb00000-000000009fcfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 3 [8086:9c14] (rev e4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: d0600000-d06fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 4 [8086:9c16] (rev e4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: d0500000-d05fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 5 [8086:9c18] (rev e4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: d0400000-d04fffff Prefetchable memory behind bridge: 00000000a0000000-00000000b01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 8 Series USB EHCI #1 [8086:9c26] (rev 04) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:2249] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 17 Region 0: Memory at d091d000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1f.0 ISA bridge [0601]: Intel Corporation 8 Series LPC Controller [8086:9c43] (rev 04) Subsystem: Hewlett-Packard Company Device [103c:2249] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] [8086:9c03] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company Device [103c:2249] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 48 Region 0: I/O ports at 8088 [size=8] Region 1: I/O ports at 8094 [size=4] Region 2: I/O ports at 8080 [size=8] Region 3: I/O ports at 8090 [size=4] Region 4: I/O ports at 8060 [size=32] Region 5: Memory at d091c000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.6 Signal processing controller [1180]: Intel Corporation 8 Series Thermal [8086:9c24] (rev 04) Subsystem: Hewlett-Packard Company Device [103c:2249] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 10 Region 0: Memory at d091b000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 07:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader [10ec:5227] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:2249] Physical Slot: 1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at d0700000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: rtsx_pci 08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 10) Subsystem: Hewlett-Packard Company Device [103c:2249] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 47 Region 0: I/O ports at 5000 [size=256] Region 2: Memory at d0604000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at d0600000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 09:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter [10ec:b723] Subsystem: Hewlett-Packard Company Device [103c:2231] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 4000 [size=256] Region 2: Memory at d0500000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: rtl8723be 0a:00.0 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] Topaz PRO [Radeon R5 M255] [1002:6901] Subsystem: Hewlett-Packard Company Device [103c:224a] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 0 Region 0: Memory at a0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at b0000000 (64-bit, prefetchable) [size=2M] Region 4: I/O ports at 3000 [size=256] Region 5: Memory at d0400000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at d0440000 [disabled] [size=128K] Capabilities: <access denied> ** USB devices: Bus 003 Device 002: ID 8087:8000 Intel Corp. Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 005: ID 04f2:b3c8 Chicony Electronics Co., Ltd Bus 001 Device 004: ID 138a:003f Validity Sensors, Inc. Bus 001 Device 003: ID 0bda:b001 Realtek Semiconductor Corp. Bus 001 Device 002: ID 046d:c077 Logitech, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 8.4 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.4.0-0.bpo.1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.4.0-0.bpo.1-amd64 depends on: ii debconf [debconf-2.0] 1.5.56 ii initramfs-tools [linux-initramfs-tool] 0.120+deb8u1 ii kmod 18-3 ii linux-base 3.5 Versions of packages linux-image-4.4.0-0.bpo.1-amd64 recommends: ii firmware-linux-free 3.3 ii irqbalance 1.0.6-3 Versions of packages linux-image-4.4.0-0.bpo.1-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02~beta2-22+deb8u1 pn linux-doc-4.4 <none> Versions of packages linux-image-4.4.0-0.bpo.1-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> ii firmware-realtek 20160110-1~bpo8+1 pn xen-hypervisor <none> -- debconf information: linux-image-4.4.0-0.bpo.1-amd64/prerm/removing-running-kernel-4.4.0-0.bpo.1-amd64: true
--- End Message ---
--- Begin Message ---
- To: 822117-done@bugs.debian.org
- Subject: Re: Bug#822117: Update solved issue
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Mon, 02 May 2016 21:26:38 +0200
- Message-id: <1462217198.17662.77.camel@decadent.org.uk>
- In-reply-to: <57236592.5060603@gmx.net>
- References: <57236592.5060603@gmx.net>
Version: 4.5.1-1 On Fri, 2016-04-29 at 15:45 +0200, Jakob Wiedner wrote: > Hi, > > after the update to Linux 4.5.0-0.bpo.1-amd64 #1 SMP Debian > 4.5.1-1~bpo8+1 (2016-04-20) x86_64 the bug does not occur any longer. Thanks for letting us know. Ben. -- Ben Hutchings Life is what happens to you while you're busy making other plans. - John LennonAttachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---