--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.2.0-1-amd64: Screen goes blank @30 seconds into boot
- From: Joel Heaton <jheaton5@comcast.net>
- Date: Sat, 18 Feb 2012 15:13:24 -0500
- Message-id: <20120218201324.19991.29553.reportbug@aragorn.hsd1.ga.comcast.net.>
Package: linux-2.6
Version: 3.2.6-1
Severity: important
Dear Maintainer,
System: Dell Inspiron One
Chipset: intel H61 Express
CPU: Intel Pentium Dual Core Intel Core i3/i5i7 (this machine is
probably an i3
Video: Intel HD/HD 2000/HD 3000
Max Resolution: 1920×1080
OS-1 Windows 7 (shipped with this OS)
OS-2 Debian Sid liquorix kernel 3.2
DE: lxde no DM I start x manually
=========================================
When booting the screen goes blank about 80% through the boot cycle.
The system is still running, I can log in blind and execute reboot
command.
I ssh into the system from another computer.
kern.log reports “Firmware Bug: ACPI: No _BQC method, cannot determine
initial brightness”
inxi -Fxx reports Drivers: (vesa, intel (unloaded: fbdev) Resolution
1280×1024@76.0hz
sporadically, I get a good boot, maybe once in 20 tries.
-- Package-specific info:
** Version:
Linux version 3.2.0-1-amd64 (Debian 3.2.4-1) (waldi@debian.org) (gcc version 4.6.2 (Debian 4.6.2-12) ) #1 SMP Sun Feb 5 15:17:15 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-1-amd64 root=UUID=d1beef49-e3a2-4489-939b-9e10464f122a ro quiet
** Not tainted
** Kernel log:
[ 4.638882] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 4.638916] usbcore: registered new interface driver btusb
[ 4.644994] Bluetooth: Atheros AR30xx firmware driver ver 1.0
[ 4.761426] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 4.761431] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 4.774476] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 4.774548] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 4.774605] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.787494] Bluetooth: Error loading firmware
[ 4.787549] ath3k: probe of 1-1.3:1.0 failed with error -5
[ 4.787572] usbcore: registered new interface driver ath3k
[ 4.874651] ath9k 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.874664] ath9k 0000:02:00.0: setting latency timer to 64
[ 4.923420] ath: EEPROM regdomain: 0x60
[ 4.923422] ath: EEPROM indicates we should expect a direct regpair map
[ 4.923424] ath: Country alpha2 being used: 00
[ 4.923425] ath: Regpair used: 0x60
[ 4.926126] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.926130] ACPI: resource 0000:00:1f.3 [io 0xf040-0xf05f] conflicts with ACPI region SMRG [io 0xf040-0xf04f]
[ 4.926132] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.960972] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 4.960977] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 4.996845] [drm] Initialized drm 1.1.0 20060810
[ 5.012405] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.012410] i915 0000:00:02.0: setting latency timer to 64
[ 5.046144] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 5.046146] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 5.046387] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 5.046391] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.046392] [drm] Driver supports precise vblank timestamp query.
[ 5.046418] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.087634] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 5.087984] Registered led device: ath9k-phy0
[ 5.087990] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900050a0000, irq=18
[ 5.212682] Linux media interface: v0.10
[ 5.238509] input: Dell Dell KM632 Wireless Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input5
[ 5.238584] generic-usb 0003:413C:2501.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell Dell KM632 Wireless Keyboard and Mouse] on usb-0000:00:1d.0-1.3/input0
[ 5.241319] input: Dell Dell KM632 Wireless Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input6
[ 5.241406] generic-usb 0003:413C:2501.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Dell Dell KM632 Wireless Keyboard and Mouse] on usb-0000:00:1d.0-1.3/input1
[ 5.242841] input: Dell Dell KM632 Wireless Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.2/input/input7
[ 5.242905] generic-usb 0003:413C:2501.0003: input,hidraw2: USB HID v1.11 Mouse [Dell Dell KM632 Wireless Keyboard and Mouse] on usb-0000:00:1d.0-1.3/input2
[ 5.242916] usbcore: registered new interface driver usbhid
[ 5.242917] usbhid: USB HID core driver
[ 5.246368] Linux video capture interface: v2.00
[ 5.263641] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (064e:8120)
[ 5.281612] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input8
[ 5.281668] usbcore: registered new interface driver uvcvideo
[ 5.281669] USB Video Class driver (1.1.1)
[ 6.399637] fbcon: inteldrmfb (fb0) is primary device
[ 6.716208] Console: switching to colour frame buffer device 240x67
[ 6.722825] fb0: inteldrmfb frame buffer device
[ 6.722826] drm: registered panic notifier
[ 6.722837] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 6.722957] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 6.723062] acpi device:33: registered as cooling_device2
[ 6.723111] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
[ 6.723148] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.723295] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.723331] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.723381] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 6.723405] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 6.801637] hda_codec: ALC269: SKU not ready 0x598301f0
[ 6.803387] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 6.805847] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 6.805941] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 7.414537] Adding 2122748k swap on /dev/sda6. Priority:-1 extents:1 across:2122748k
[ 7.533440] EXT3-fs (sda5): using internal journal
[ 7.608492] loop: module loaded
[ 8.614629] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8.883551] RPC: Registered named UNIX socket transport module.
[ 8.883554] RPC: Registered udp transport module.
[ 8.883555] RPC: Registered tcp transport module.
[ 8.883556] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.142743] FS-Cache: Loaded
[ 9.174915] FS-Cache: Netfs 'nfs' registered for caching
[ 9.192574] r8169 0000:04:00.0: eth0: link down
[ 9.192606] r8169 0000:04:00.0: eth0: link down
[ 9.192867] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.195749] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 9.568173] fuse init (API version 7.17)
[ 9.800553] wlan0: authenticate with 00:1e:e5:50:55:cf (try 1)
[ 9.802715] wlan0: authenticated
[ 9.831393] wlan0: associate with 00:1e:e5:50:55:cf (try 1)
[ 9.835258] wlan0: RX AssocResp from 00:1e:e5:50:55:cf (capab=0x401 status=0 aid=1)
[ 9.835261] wlan0: associated
[ 9.842268] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 10.796553] r8169 0000:04:00.0: eth0: link up
[ 10.796829] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 11.751364] lp: driver loaded but no devices found
[ 11.753462] ppdev: user-space parallel port driver
[ 20.542457] wlan0: no IPv6 routers present
[ 21.324816] eth0: no IPv6 routers present
[84955.168666] device-mapper: uevent: version 1.0.3
[84955.168726] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[84960.137026] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[84960.137261] SGI XFS Quota Management subsystem
[84960.139185] JFS: nTxBlock = 8192, nTxLock = 65536
[84960.145674] NTFS driver 2.1.30 [Flags: R/W MODULE].
[84960.150626] QNX4 filesystem 0.2.3 registered.
[84960.158338] Btrfs loaded
** Model information
sys_vendor: Dell Inc.
product_name: Inspiron One 2320
product_version: 00
chassis_vendor: Dell Inc.
chassis_version: 20167165690_1
bios_vendor: Dell Inc.
bios_version: A04
board_vendor: Dell Inc.
board_name: 0DMNCP
board_version: A00
** Loaded modules:
btrfs
zlib_deflate
crc32c
libcrc32c
ufs
qnx4
hfsplus
hfs
minix
ntfs
vfat
msdos
fat
jfs
xfs
reiserfs
ext4
jbd2
ext2
dm_mod
parport_pc
ppdev
lp
parport
fuse
nfsd
nfs
lockd
fscache
auth_rpcgss
nfs_acl
sunrpc
loop
snd_hda_codec_realtek
joydev
uvcvideo
snd_hda_intel
snd_hda_codec
videodev
usbhid
hid
media
v4l2_compat_ioctl32
snd_hwdep
snd_pcm
arc4
i915
drm_kms_helper
drm
snd_seq
i2c_i801
i2c_algo_bit
snd_timer
snd_seq_device
ath9k
mac80211
i2c_core
iTCO_wdt
ath9k_common
ath9k_hw
ath3k
btusb
ath
bluetooth
cfg80211
crc16
dell_wmi_aio
psmouse
sparse_keymap
snd
soundcore
processor
iTCO_vendor_support
rfkill
video
button
evdev
snd_page_alloc
wmi
serio_raw
dcdbas
pcspkr
thermal_sys
ext3
jbd
mbcache
sr_mod
cdrom
sd_mod
crc_t10dif
ehci_hcd
ahci
libahci
libata
usbcore
usb_common
r8169
mii
scsi_mod
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0100] (rev 09)
Subsystem: Dell Device [1028:0511]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0102] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:0511]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at fe000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Dell Device [1028:0511]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fe508000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0511]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe507000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
Subsystem: Dell Device [1028:0511]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at fe500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fe400000-fe4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Prefetchable memory behind bridge: 00000000e0000000-00000000e00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0511]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe506000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation H61 Express Chipset Family LPC Controller [8086:1c5c] (rev 05)
Subsystem: Dell Device [1028:0511]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c02] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:0511]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 45
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at fe505000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)
Subsystem: Dell Device [1028:0511]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe504000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: Dell Wireless 1702 802.11bgn Half-size Mini PCIe Card [AR9002WB-1NGCD] [1028:0205]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
Subsystem: Dell Device [1028:0511]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at e0004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at e0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 0bda:0139 Realtek Semiconductor Corp.
Bus 001 Device 004: ID 0cf3:3002 Atheros Communications, Inc.
Bus 001 Device 005: ID 064e:8120 Suyin Corp.
Bus 002 Device 003: ID 413c:2501 Dell Computer Corp.
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.100
ii linux-base 3.4
ii module-init-tools 3.16-1
Versions of packages linux-image-3.2.0-1-amd64 recommends:
ii firmware-linux-free 3
Versions of packages linux-image-3.2.0-1-amd64 suggests:
pn grub-pc 1.99-14
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux 0.35
pn firmware-linux-nonfree 0.35
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek 0.35
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-1-amd64/postinst/depmod-error-initrd-3.2.0-1-amd64: false
linux-image-3.2.0-1-amd64/postinst/missing-firmware-3.2.0-1-amd64:
linux-image-3.2.0-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-1-amd64/prerm/removing-running-kernel-3.2.0-1-amd64: true
--- End Message ---