--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux: Radeon DRM doesn't initialise properly (firmware fails to load?)
- From: Owen Riddy <owen.riddy@gmail.com>
- Date: Fri, 18 Feb 2011 21:23:22 +1100
- Message-id: <20110218102322.2395.40726.reportbug@cyclone>
Package: linux-2.6
Version: 2.6.37-1
Severity: important
File: linux
I have a Radeon 3450 grampics card (AMD/ATI) and lived on Squeeze until the recent release. The card was well supported by the new Open Source graphics driver (radeon).
Whenever I compiled a newer vanilla kernel KMS didn't work (starting with 2.6.33, I belive. It was a while ago) and X wouldn't load. Every so often I tried a different kernel, and the problem remained. On X, the system would completely hang (including access to virtual terminals). I assumed a mis-configured kernel and gave up.
This debian kernel image seems to have the same problem. After upgrading, I get a suspicious 180 second pause when the kernel "populates /dev", which I now attribute to a bug, possibly in the firmware loading code. I'm getting an error message about modprobe blocking (in dmesg).
To be sure I havn't tainted the configuration, I installed the Squeeze release base system, upgraded to wheezy, rebooted to test KMS (virtual terminal screen resolution was large, suggesting it worked), upgraded to unstable and rebooed, at which point I get the 180 second hang and modrpboe errors, as well as a rather low resolution VT.
This renders X unusable. Does this report go here, or upstream?
-- Package-specific info:
** Version:
Linux version 2.6.37-1-686 (Debian 2.6.37-1) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-10) ) #1 SMP Tue Feb 15 18:21:50 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.37-1-686 root=/dev/mapper/cyclone--rootspace-squeeze ro quiet
** Not tainted
** Kernel log:
[ 240.684226] [<c128749c>] ? mutex_lock+0x17/0x24
[ 240.684228] [<c128749c>] ? mutex_lock+0x17/0x24
[ 240.684232] [<c11c5caf>] ? __driver_attach+0x27/0x5b
[ 240.684235] [<c11c5465>] ? bus_for_each_dev+0x37/0x5f
[ 240.684238] [<c11c5aba>] ? driver_attach+0x11/0x13
[ 240.684241] [<c11c5c88>] ? __driver_attach+0x0/0x5b
[ 240.684243] [<c11c57e0>] ? bus_add_driver+0x87/0x1bb
[ 240.684246] [<c114013b>] ? kset_find_obj_hinted+0x43/0x7d
[ 240.684250] [<f908c000>] ? alsa_card_azx_init+0x0/0x14 [snd_hda_intel]
[ 240.684253] [<c11c5ee4>] ? driver_register+0x7a/0xd9
[ 240.684258] [<f908c000>] ? alsa_card_azx_init+0x0/0x14 [snd_hda_intel]
[ 240.684262] [<c1153680>] ? __pci_register_driver+0x33/0x89
[ 240.684266] [<f908c000>] ? alsa_card_azx_init+0x0/0x14 [snd_hda_intel]
[ 240.684269] [<c1001151>] ? do_one_initcall+0x68/0x10f
[ 240.684272] [<c1057be3>] ? sys_init_module+0xca5/0xe36
[ 240.684285] [<c1002f9f>] ? sysenter_do_call+0x12/0x28
[ 360.684027] INFO: task modprobe:699 blocked for more than 120 seconds.
[ 360.684096] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 360.684185] modprobe D f455bcc0 0 699 1 0x00000000
[ 360.684189] f719f1c0 00000082 f715fb70 f455bcc0 00000000 00000000 f715fb70 c1444200
[ 360.684193] f719f360 c1444200 33bc2000 00000001 f719f360 f719f364 c1444200 f719f1c0
[ 360.684198] c1444200 f454f124 f90883fc 00000180 10ec0888 f4d3f060 f71e0800 f44fa000
[ 360.684202] Call Trace:
[ 360.684212] [<f90883fc>] ? azx_probe+0x900/0x934 [snd_hda_intel]
[ 360.684217] [<f9087837>] ? azx_send_cmd+0x0/0x126 [snd_hda_intel]
[ 360.684222] [<f9087635>] ? azx_get_response+0x0/0x202 [snd_hda_intel]
[ 360.684227] [<c12873ab>] ? __mutex_lock_common+0xe9/0x13a
[ 360.684230] [<c128740b>] ? __mutex_lock_slowpath+0xf/0x11
[ 360.684233] [<c128749c>] ? mutex_lock+0x17/0x24
[ 360.684235] [<c128749c>] ? mutex_lock+0x17/0x24
[ 360.684239] [<c11c5caf>] ? __driver_attach+0x27/0x5b
[ 360.684242] [<c11c5465>] ? bus_for_each_dev+0x37/0x5f
[ 360.684244] [<c11c5aba>] ? driver_attach+0x11/0x13
[ 360.684247] [<c11c5c88>] ? __driver_attach+0x0/0x5b
[ 360.684249] [<c11c57e0>] ? bus_add_driver+0x87/0x1bb
[ 360.684253] [<c114013b>] ? kset_find_obj_hinted+0x43/0x7d
[ 360.684257] [<f908c000>] ? alsa_card_azx_init+0x0/0x14 [snd_hda_intel]
[ 360.684260] [<c11c5ee4>] ? driver_register+0x7a/0xd9
[ 360.684264] [<f908c000>] ? alsa_card_azx_init+0x0/0x14 [snd_hda_intel]
[ 360.684268] [<c1153680>] ? __pci_register_driver+0x33/0x89
[ 360.684272] [<f908c000>] ? alsa_card_azx_init+0x0/0x14 [snd_hda_intel]
[ 360.684275] [<c1001151>] ? do_one_initcall+0x68/0x10f
[ 360.684278] [<c1057be3>] ? sys_init_module+0xca5/0xe36
[ 360.684292] [<c1002f9f>] ? sysenter_do_call+0x12/0x28
[ 480.684020] INFO: task modprobe:699 blocked for more than 120 seconds.
[ 480.684110] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 480.684199] modprobe D f455bcc0 0 699 1 0x00000000
[ 480.684203] f719f1c0 00000082 f715fb70 f455bcc0 00000000 00000000 f715fb70 c1444200
[ 480.684207] f719f360 c1444200 33bc2000 00000001 f719f360 f719f364 c1444200 f719f1c0
[ 480.684211] c1444200 f454f124 f90883fc 00000180 10ec0888 f4d3f060 f71e0800 f44fa000
[ 480.684216] Call Trace:
[ 480.684226] [<f90883fc>] ? azx_probe+0x900/0x934 [snd_hda_intel]
[ 480.684231] [<f9087837>] ? azx_send_cmd+0x0/0x126 [snd_hda_intel]
[ 480.684236] [<f9087635>] ? azx_get_response+0x0/0x202 [snd_hda_intel]
[ 480.684241] [<c12873ab>] ? __mutex_lock_common+0xe9/0x13a
[ 480.684244] [<c128740b>] ? __mutex_lock_slowpath+0xf/0x11
[ 480.684247] [<c128749c>] ? mutex_lock+0x17/0x24
[ 480.684249] [<c128749c>] ? mutex_lock+0x17/0x24
[ 480.684253] [<c11c5caf>] ? __driver_attach+0x27/0x5b
[ 480.684256] [<c11c5465>] ? bus_for_each_dev+0x37/0x5f
[ 480.684259] [<c11c5aba>] ? driver_attach+0x11/0x13
[ 480.684261] [<c11c5c88>] ? __driver_attach+0x0/0x5b
[ 480.684264] [<c11c57e0>] ? bus_add_driver+0x87/0x1bb
[ 480.684267] [<c114013b>] ? kset_find_obj_hinted+0x43/0x7d
[ 480.684271] [<f908c000>] ? alsa_card_azx_init+0x0/0x14 [snd_hda_intel]
[ 480.684274] [<c11c5ee4>] ? driver_register+0x7a/0xd9
[ 480.684278] [<f908c000>] ? alsa_card_azx_init+0x0/0x14 [snd_hda_intel]
[ 480.684282] [<c1153680>] ? __pci_register_driver+0x33/0x89
[ 480.684286] [<f908c000>] ? alsa_card_azx_init+0x0/0x14 [snd_hda_intel]
[ 480.684289] [<c1001151>] ? do_one_initcall+0x68/0x10f
[ 480.684293] [<c1057be3>] ? sys_init_module+0xca5/0xe36
[ 480.684305] [<c1002f9f>] ? sysenter_do_call+0x12/0x28
[ 600.684026] INFO: task modprobe:699 blocked for more than 120 seconds.
[ 600.684079] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 600.684135] modprobe D f455bcc0 0 699 1 0x00000000
[ 600.684138] f719f1c0 00000082 f715fb70 f455bcc0 00000000 00000000 f715fb70 c1444200
[ 600.684143] f719f360 c1444200 33bc2000 00000001 f719f360 f719f364 c1444200 f719f1c0
[ 600.684147] c1444200 f454f124 f90883fc 00000180 10ec0888 f4d3f060 f71e0800 f44fa000
[ 600.684152] Call Trace:
[ 600.684162] [<f90883fc>] ? azx_probe+0x900/0x934 [snd_hda_intel]
[ 600.684167] [<f9087837>] ? azx_send_cmd+0x0/0x126 [snd_hda_intel]
[ 600.684172] [<f9087635>] ? azx_get_response+0x0/0x202 [snd_hda_intel]
[ 600.684177] [<c12873ab>] ? __mutex_lock_common+0xe9/0x13a
[ 600.684180] [<c128740b>] ? __mutex_lock_slowpath+0xf/0x11
[ 600.684183] [<c128749c>] ? mutex_lock+0x17/0x24
[ 600.684185] [<c128749c>] ? mutex_lock+0x17/0x24
[ 600.684189] [<c11c5caf>] ? __driver_attach+0x27/0x5b
[ 600.684192] [<c11c5465>] ? bus_for_each_dev+0x37/0x5f
[ 600.684195] [<c11c5aba>] ? driver_attach+0x11/0x13
[ 600.684197] [<c11c5c88>] ? __driver_attach+0x0/0x5b
[ 600.684200] [<c11c57e0>] ? bus_add_driver+0x87/0x1bb
[ 600.684203] [<c114013b>] ? kset_find_obj_hinted+0x43/0x7d
[ 600.684207] [<f908c000>] ? alsa_card_azx_init+0x0/0x14 [snd_hda_intel]
[ 600.684210] [<c11c5ee4>] ? driver_register+0x7a/0xd9
[ 600.684214] [<f908c000>] ? alsa_card_azx_init+0x0/0x14 [snd_hda_intel]
[ 600.684218] [<c1153680>] ? __pci_register_driver+0x33/0x89
[ 600.684222] [<f908c000>] ? alsa_card_azx_init+0x0/0x14 [snd_hda_intel]
[ 600.684225] [<c1001151>] ? do_one_initcall+0x68/0x10f
[ 600.684229] [<c1057be3>] ? sys_init_module+0xca5/0xe36
[ 600.684243] [<c1002f9f>] ? sysenter_do_call+0x12/0x28
** Model information
not available
** Loaded modules:
Module Size Used by
ext3 92244 2
jbd 31940 1 ext3
loop 10995 0
firewire_sbp2 9637 0
snd_hda_codec_realtek 201681 1
radeon 699115 1
snd_hda_intel 25433 1
snd_hda_codec 52089 2 snd_hda_codec_realtek,snd_hda_intel
tpm_tis 5405 0
ttm 36961 1 radeon
snd_hwdep 4046 1 snd_hda_codec
evdev 6160 4
tpm 8175 1 tpm_tis
drm_kms_helper 19621 1 radeon
snd_pcm 47060 2 snd_hda_intel,snd_hda_codec
usbhid 26418 0
hid 51358 1 usbhid
drm 119134 3 radeon,ttm,drm_kms_helper
snd_timer 12501 1 snd_pcm
i2c_algo_bit 3373 1 radeon
snd 34245 6 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
psmouse 38578 0
processor 20840 0
button 3610 0
power_supply 5587 1 radeon
serio_raw 2898 0
i2c_piix4 6632 0
tpm_bios 3657 1 tpm
pcspkr 1219 0
i2c_core 12986 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_piix4
soundcore 3434 1 snd
wmi 6004 0
k8temp 2483 0
snd_page_alloc 5029 2 snd_hda_intel,snd_pcm
shpchp 18083 0
pci_hotplug 16971 1 shpchp
ext4 245664 1
mbcache 3784 2 ext3,ext4
jbd2 48183 1 ext4
crc16 1035 1 ext4
dm_mod 47842 5
usb_storage 30355 0
uas 5461 0
sg 15835 0
sd_mod 24958 6
sr_mod 10929 0
cdrom 25985 1 sr_mod
crc_t10dif 1020 1 sd_mod
ata_generic 2183 0
ohci_hcd 16196 0
pata_atiixp 2641 0
ahci 16581 4
libahci 13230 1 ahci
libata 123394 4 ata_generic,pata_atiixp,ahci,libahci
ehci_hcd 28227 0
scsi_mod 128267 7 firewire_sbp2,usb_storage,uas,sg,sd_mod,sr_mod,libata
thermal 6106 0
firewire_ohci 19287 0
thermal_sys 9328 2 processor,thermal
firewire_core 35432 2 firewire_sbp2,firewire_ohci
crc_itu_t 1039 1 firewire_core
usbcore 95285 6 usbhid,usb_storage,uas,ohci_hcd,ehci_hcd
sky2 33052 0
nls_base 4521 1 usbcore
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:22:68:05:5d:29 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.6/24 brd 192.168.0.255 scope global eth0
inet6 fe80::222:68ff:fe05:5d29/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 560 8 0 0 0 0 0 0 560 8 0 0 0 0 0 0
eth0: 280082 274 0 0 0 0 0 0 22750 242 0 0 0 0 0 0
*** Protocol statistics:
Ip:
271 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
269 incoming packets delivered
236 requests sent out
8 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
12 active connections openings
0 passive connection openings
0 failed connection attempts
0 connection resets received
0 connections established
233 segments received
204 segments send out
0 segments retransmited
0 bad segments received.
5 resets sent
Udp:
32 packets received
0 packets to unknown port received.
0 packet receive errors
32 packets sent
UdpLite:
TcpExt:
6 TCP sockets finished time wait in fast timer
2 delayed acks sent
4 packets directly queued to recvmsg prequeue.
2250 bytes directly received in process context from prequeue
162 packet headers predicted
2 packets header predicted and directly queued to user
26 acknowledgments not containing data payload received
IpExt:
InBcastPkts: 4
InOctets: 276300
OutOctets: 18714
InBcastOctets: 974
*** Device features:
eth0: 0x10014983
lo: 0x13865
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600]
Subsystem: Acer Incorporated [ALI] Device [1025:014e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fe600000-fe7fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0) [1022:9603] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe800000-fe8fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) [1022:9605] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe900000-fe9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] [1002:4390] (prog-if 01 [AHCI 1.0])
Subsystem: Acer Incorporated [ALI] Device [1025:014e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: I/O ports at a000 [size=8]
Region 1: I/O ports at 9000 [size=4]
Region 2: I/O ports at 8000 [size=8]
Region 3: I/O ports at 7000 [size=4]
Region 4: I/O ports at 6000 [size=16]
Region 5: Memory at fe5ff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:014e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe5fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:014e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe5fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:014e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe5ff000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:014e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe5fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:014e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe5fb000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:014e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fe5fa800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3a)
Subsystem: Acer Incorporated [ALI] Device [1025:014e]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP])
Subsystem: Acer Incorporated [ALI] Device [1025:014e]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_atiixp
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
Subsystem: Acer Incorporated [ALI] Device [1025:014e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at fe5f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d]
Subsystem: Acer Incorporated [ALI] Device [1025:014e]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=05, subordinate=05, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:014e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe5f9000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon HD 3200 Graphics [1002:9610] (prog-if 00 [VGA controller])
Subsystem: Acer Incorporated [ALI] Device [1025:014e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at b000 [size=256]
Region 2: Memory at fe7f0000 (32-bit, non-prefetchable) [size=64K]
Region 5: Memory at fe600000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
Kernel driver in use: radeon
01:05.1 Audio device [0403]: ATI Technologies Inc RS780 Azalia controller [1002:960f]
Subsystem: ATI Technologies Inc RS780 Azalia controller [1002:960f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 10
Region 0: Memory at fe7e8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
02:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV620 LE [Radeon HD 3450] [1002:95c5] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited Device [174b:e530]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fe8f0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at c000 [size=256]
Expansion ROM at fe8c0000 [disabled] [size=128K]
Capabilities: <access denied>
02:00.1 Audio device [0403]: ATI Technologies Inc RV620 Audio device [Radeon HD 34xx Series] [1002:aa28]
Subsystem: PC Partner Limited Device [174b:aa28]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 10
Region 0: Memory at fe8ec000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
03:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8071 PCI-E Gigabit Ethernet Controller [11ab:436b] (rev 16)
Subsystem: Acer Incorporated [ALI] Device [1025:014e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at d800 [size=256]
Expansion ROM at fe9c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
04:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technology Corp. IEEE 1394 Host Controller [197b:2380] (prog-if 10 [OHCI])
Subsystem: JMicron Technology Corp. IEEE 1394 Host Controller [197b:2380]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at feaff400 (32-bit, non-prefetchable) [size=128]
Region 4: Memory at feaff000 (32-bit, non-prefetchable) [size=128]
Region 5: Memory at feafec00 (32-bit, non-prefetchable) [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
05:06.0 Modem [0703]: Motorola SM56 Data Fax Modem [1057:3052] (rev 04) (prog-if 00 [Generic])
Subsystem: Motorola Device [1057:3020]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 21
Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at e800 [size=256]
Capabilities: <access denied>
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0bda:0151 Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader)
Bus 001 Device 005: ID 0951:1624 Kingston Technology
Bus 004 Device 002: ID 046d:c054 Logitech, Inc.
Bus 003 Device 002: ID 04ca:002f Lite-On Technology Corp.
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.37-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.37-1-686 depends on:
ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.37-1 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.37-1-686 recommends:
ii firmware-linux-free 2.6.37-1 Binary firmware for various driver
ii libc6-i686 2.11.2-11 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.37-1-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.37 <none> (no description available)
Versions of packages linux-image-2.6.37-1-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.28 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.37-1-686/postinst/ignoring-do-bootloader-2.6.37-1-686:
linux-image-2.6.37-1-686/prerm/removing-running-kernel-2.6.37-1-686: true
linux-image-2.6.37-1-686/postinst/missing-firmware-2.6.37-1-686:
linux-image-2.6.37-1-686/postinst/depmod-error-initrd-2.6.37-1-686: false
--- End Message ---