--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.2.0-1-amd64: keys get stuck and keyboard stops responding
- From: GSR <gsr.bugs@infernal-iceberg.com>
- Date: Wed, 7 Mar 2012 05:08:35 +0100
- Message-id: <20120307040835.GA13876@fortress.battleship>
Package: linux-2.6
Version: 3.2.7-1
Severity: important
Dear Maintainer,
Newly installed machine and every few hours the PS/2 keyboard dies
leaving a key stuck, but the USB mouse still works. Focusing different
windows shows something being typed or a modifier key taking effect
(depends, each time is a different key, sometimes they do not conflict
with the wm and you can also move windows with mouse, etc). Alt-Sysrq
or C-A-Fx stop working too when it happens.
Accesing the machine via ssh shows the system still works, allows
changing VT with chvt (just to see what they have, no input allowed),
killing programs or rebooting, but no obvious way to recover the kbd
other than restart. Echoing things to /proc/sysrq-trigger is allowed
but the naK or Raw ones do not manage to get the kbd back in line,
they just say they were called and notice nothing is really wrong.
In the recent days I have seen lines in the logs like:
---8<---
atkbd serio0: Unknown key pressed (translated set 2, code 0x5b on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 5b <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x0 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xc0 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e040 <keycode>' to make it known.
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
ACPI: EC: GPE storm detected, transactions will use polling mode
atkbd serio0: Unknown key pressed (translated set 2, code 0x8b on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00b <keycode>' to make it known.
--->8--
but they are not immediate to the kbd hang. Just adding in case they
are related or can provide extra hints about what is going on (IRQ
mess? ACPI gone mad?). The serio0 ones show different codes each time.
Filling under kernel as Sysrq combos should not stop working, no
matter if the ctrigger is video driver or a program, please reassign
or join with other report if necessary (bug tracker not responding to
queries to list previous reports currently).
-- Package-specific info:
** Version:
Linux version 3.2.0-1-amd64 (Debian 3.2.7-1) (debian-kernel@lists.debian.org) (gcc version 4.6.2 (Debian 4.6.2-16) ) #1 SMP Tue Feb 28 15:35:32 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-1-amd64 root=/dev/mapper/VGIntelSSD-LVIntelRoot ro quiet
** Not tainted
** Kernel log:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-1-amd64 (Debian 3.2.7-1) (debian-kernel@lists.debian.org) (gcc version 4.6.2 (Debian 4.6.2-16) ) #1 SMP Tue Feb 28 15:35:32 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-1-amd64 root=/dev/mapper/VGIntelSSD-LVIntelRoot ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfe70000 (usable)
[ 0.000000] BIOS-e820: 00000000dfe70000 - 00000000dfe88000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfe88000 - 00000000dfedc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfedc000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000420000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: System manufacturer System Product Name/P7P55D, BIOS 1807 07/22/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x420000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdfe70 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfe70000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfe70000 page 4k
[ 0.000000] kernel direct mapping tables up to dfe70000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000420000000
[ 0.000000] 0100000000 - 0420000000 page 2M
[ 0.000000] kernel direct mapping tables up to 420000000 @ dfe5e000-dfe70000
[ 0.000000] RAMDISK: 36b40000 - 37598000
[ 0.000000] ACPI: RSDP 00000000000fb970 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000dfe70100 0006C (v01 072210 XSDT1251 20100722 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000dfe70290 000F4 (v03 072210 FACP1251 20100722 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000dfe704a0 0EEF8 (v01 A1326 A1326001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000dfe88000 00040
[ 0.000000] ACPI: APIC 00000000dfe70390 000CC (v01 072210 APIC1251 20100722 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000dfe70460 0003C (v01 072210 OEMMCFG 20100722 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000dfe88040 00072 (v01 072210 OEMB1251 20100722 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000dfe7f3a0 00038 (v01 072210 OEMHPET 20100722 MSFT 00000097)
[ 0.000000] ACPI: DMAR 00000000dfe880c0 00090 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
[ 0.000000] ACPI: ASPT 00000000dfe7f640 00034 (v06 072210 PerfTune 20100722 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000dfe7f680 000B0 (v01 072210 OEMOSFR 20100722 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000dfe8ae10 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000420000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000420000000
[ 0.000000] NODE_DATA [000000041fffb000 - 000000041fffffff]
[ 0.000000] [ffffea0000000000-ffffea000e7fffff] PMD -> [ffff88040f600000-ffff88041d7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00420000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000dfe70
[ 0.000000] 0: 0x00100000 -> 0x00420000
[ 0.000000] On node 0 totalpages: 4193790
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 898728 pages, LIFO batch:31
[ 0.000000] Normal zone: 44800 pages used for memmap
[ 0.000000] Normal zone: 3232000 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfe70000 - 00000000dfe88000
[ 0.000000] PM: Registered nosave memory: 00000000dfe88000 - 00000000dfedc000
[ 0.000000] PM: Registered nosave memory: 00000000dfedc000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88041fc00000 s82304 r8192 d24192 u131072
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4134649
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-1-amd64 root=/dev/mapper/VGIntelSSD-LVIntelRoot ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16456724k/17301504k available (3368k kernel code, 526344k absent, 318436k reserved, 3363k data, 568k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:808 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2942.408 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5884.81 BogoMIPS (lpj=11769632)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000036] Security Framework initialized
[ 0.000039] AppArmor: AppArmor disabled by boot time parameter
[ 0.001026] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.004044] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.005435] Mount-cache hash table entries: 256
[ 0.005535] Initializing cgroup subsys cpuacct
[ 0.005540] Initializing cgroup subsys memory
[ 0.005550] Initializing cgroup subsys devices
[ 0.005553] Initializing cgroup subsys freezer
[ 0.005554] Initializing cgroup subsys net_cls
[ 0.005556] Initializing cgroup subsys blkio
[ 0.005579] CPU: Physical Processor ID: 0
[ 0.005580] CPU: Processor Core ID: 0
[ 0.005584] mce: CPU supports 9 MCE banks
[ 0.005592] CPU0: Thermal monitoring enabled (TM1)
[ 0.005598] using mwait in idle threads.
[ 0.005890] ACPI: Core revision 20110623
[ 0.114120] DMAR: Host address width 36
[ 0.114122] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.114129] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f020e3
[ 0.114131] DMAR: RMRR base: 0x000000000e4000 end: 0x000000000e7fff
[ 0.114133] DMAR: RMRR base: 0x000000dfeec000 end: 0x000000dfefffff
[ 0.114230] Switched APIC routing to physical flat.
[ 0.114610] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.154292] CPU0: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz stepping 05
[ 0.260593] Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver.
[ 0.260598] ... version: 3
[ 0.260599] ... bit width: 48
[ 0.260600] ... generic registers: 4
[ 0.260602] ... value mask: 0000ffffffffffff
[ 0.260603] ... max period: 000000007fffffff
[ 0.260604] ... fixed-purpose events: 3
[ 0.260605] ... event mask: 000000070000000f
[ 0.260835] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.260919] Booting Node 0, Processors #1
[ 0.260921] smpboot cpu 1: start_ip = 99000
[ 0.368671] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.368759] #2
[ 0.368760] smpboot cpu 2: start_ip = 99000
[ 0.476704] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.476792] #3
[ 0.476794] smpboot cpu 3: start_ip = 99000
[ 0.584638] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.584727] #4
[ 0.584728] smpboot cpu 4: start_ip = 99000
[ 0.692640] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.692732] #5
[ 0.692733] smpboot cpu 5: start_ip = 99000
[ 0.800682] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.800771] #6
[ 0.800772] smpboot cpu 6: start_ip = 99000
[ 0.908621] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.908708] #7
[ 0.908710] smpboot cpu 7: start_ip = 99000
[ 1.016659] NMI watchdog enabled, takes one hw-pmu counter.
[ 1.016684] Brought up 8 CPUs
[ 1.016686] Total of 8 processors activated (47077.03 BogoMIPS).
[ 1.022131] devtmpfs: initialized
[ 1.025970] PM: Registering ACPI NVS region at dfe88000 (344064 bytes)
[ 1.026097] print_constraints: dummy:
[ 1.026148] NET: Registered protocol family 16
[ 1.026225] ACPI: bus type pci registered
[ 1.026280] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 1.026283] PCI: not using MMCONFIG
[ 1.026284] PCI: Using configuration type 1 for base access
[ 1.027002] bio: create slab <bio-0> at 0
[ 1.027092] ACPI: Added _OSI(Module Device)
[ 1.027094] ACPI: Added _OSI(Processor Device)
[ 1.027096] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.027097] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.028210] ACPI: EC: Look up EC in DSDT
[ 1.029349] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.056658] ACPI: SSDT 00000000dfe88150 0265C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 1.057067] ACPI: Dynamic OEM Table Load:
[ 1.057069] ACPI: SSDT (null) 0265C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 1.057160] ACPI: SSDT 00000000dfe8a7b0 00659 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 1.057472] ACPI: Dynamic OEM Table Load:
[ 1.057474] ACPI: SSDT (null) 00659 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 1.057781] ACPI: Interpreter enabled
[ 1.057784] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.057804] ACPI: Using IOAPIC for interrupt routing
[ 1.057822] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 1.058996] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 1.068988] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 1.069120] ACPI: No dock devices found.
[ 1.069122] HEST: Table not found.
[ 1.069124] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.069311] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.069472] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.069474] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.069476] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.069477] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 1.069479] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf7ffffff]
[ 1.069481] pci_root PNP0A08:00: host bridge window [mem 0xfc000000-0xfed8ffff]
[ 1.069492] pci 0000:00:00.0: [8086:d131] type 0 class 0x000600
[ 1.069536] pci 0000:00:03.0: [8086:d138] type 1 class 0x000604
[ 1.069579] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.069582] pci 0000:00:03.0: PME# disabled
[ 1.069599] pci 0000:00:08.0: [8086:d155] type 0 class 0x000880
[ 1.069648] pci 0000:00:08.1: [8086:d156] type 0 class 0x000880
[ 1.069696] pci 0000:00:08.2: [8086:d157] type 0 class 0x000880
[ 1.069743] pci 0000:00:08.3: [8086:d158] type 0 class 0x000880
[ 1.069786] pci 0000:00:10.0: [8086:d150] type 0 class 0x000880
[ 1.069824] pci 0000:00:10.1: [8086:d151] type 0 class 0x000880
[ 1.069881] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 1.069899] pci 0000:00:1a.0: reg 10: [mem 0xf7bfe000-0xf7bfe3ff]
[ 1.069979] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.069983] pci 0000:00:1a.0: PME# disabled
[ 1.070004] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 1.070017] pci 0000:00:1b.0: reg 10: [mem 0xf7bf8000-0xf7bfbfff 64bit]
[ 1.070075] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.070078] pci 0000:00:1b.0: PME# disabled
[ 1.070096] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 1.070157] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.070159] pci 0000:00:1c.0: PME# disabled
[ 1.070180] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[ 1.070240] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.070243] pci 0000:00:1c.4: PME# disabled
[ 1.070261] pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604
[ 1.070322] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.070325] pci 0000:00:1c.5: PME# disabled
[ 1.070343] pci 0000:00:1c.6: [8086:3b4e] type 1 class 0x000604
[ 1.070403] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 1.070406] pci 0000:00:1c.6: PME# disabled
[ 1.070424] pci 0000:00:1c.7: [8086:3b50] type 1 class 0x000604
[ 1.070484] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 1.070487] pci 0000:00:1c.7: PME# disabled
[ 1.070510] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 1.070528] pci 0000:00:1d.0: reg 10: [mem 0xf7bfd000-0xf7bfd3ff]
[ 1.070608] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.070612] pci 0000:00:1d.0: PME# disabled
[ 1.070629] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 1.070684] pci 0000:00:1f.0: [8086:3b02] type 0 class 0x000601
[ 1.070796] pci 0000:00:1f.2: [8086:3b22] type 0 class 0x000106
[ 1.070812] pci 0000:00:1f.2: reg 10: [io 0xa880-0xa887]
[ 1.070818] pci 0000:00:1f.2: reg 14: [io 0xa800-0xa803]
[ 1.070825] pci 0000:00:1f.2: reg 18: [io 0xa480-0xa487]
[ 1.070832] pci 0000:00:1f.2: reg 1c: [io 0xa400-0xa403]
[ 1.070838] pci 0000:00:1f.2: reg 20: [io 0xa080-0xa09f]
[ 1.070845] pci 0000:00:1f.2: reg 24: [mem 0xf7bf7000-0xf7bf77ff]
[ 1.070885] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.070888] pci 0000:00:1f.2: PME# disabled
[ 1.070902] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 1.070915] pci 0000:00:1f.3: reg 10: [mem 0xf7bfc000-0xf7bfc0ff 64bit]
[ 1.070933] pci 0000:00:1f.3: reg 20: [io 0xffe0-0xffff]
[ 1.070988] pci 0000:01:00.0: [1002:6899] type 0 class 0x000300
[ 1.070999] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.071008] pci 0000:01:00.0: reg 18: [mem 0xf7cc0000-0xf7cdffff 64bit]
[ 1.071014] pci 0000:01:00.0: reg 20: [io 0xb000-0xb0ff]
[ 1.071025] pci 0000:01:00.0: reg 30: [mem 0xf7ca0000-0xf7cbffff pref]
[ 1.071052] pci 0000:01:00.0: supports D1 D2
[ 1.071070] pci 0000:01:00.1: [1002:aa50] type 0 class 0x000403
[ 1.071081] pci 0000:01:00.1: reg 10: [mem 0xf7cfc000-0xf7cfffff 64bit]
[ 1.071130] pci 0000:01:00.1: supports D1 D2
[ 1.076578] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 1.076584] pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
[ 1.076589] pci 0000:00:03.0: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 1.076597] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.076650] pci 0000:00:1c.0: PCI bridge to [bus 06-06]
[ 1.076695] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.076735] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.076792] pci 0000:03:00.0: [197b:2363] type 0 class 0x000106
[ 1.076874] pci 0000:03:00.0: reg 24: [mem 0xf7efa000-0xf7efbfff]
[ 1.076934] pci 0000:03:00.0: PME# supported from D3hot
[ 1.076939] pci 0000:03:00.0: PME# disabled
[ 1.076966] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
[ 1.076988] pci 0000:03:00.1: reg 10: [io 0xdc00-0xdc07]
[ 1.077001] pci 0000:03:00.1: reg 14: [io 0xd880-0xd883]
[ 1.077013] pci 0000:03:00.1: reg 18: [io 0xd800-0xd807]
[ 1.077026] pci 0000:03:00.1: reg 1c: [io 0xd480-0xd483]
[ 1.077038] pci 0000:03:00.1: reg 20: [io 0xd400-0xd40f]
[ 1.077116] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 1.077128] pci 0000:00:1c.6: PCI bridge to [bus 03-03]
[ 1.077131] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 1.077134] pci 0000:00:1c.6: bridge window [mem 0xf7e00000-0xf7efffff]
[ 1.077188] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 1.077203] pci 0000:02:00.0: reg 10: [io 0xc800-0xc8ff]
[ 1.077229] pci 0000:02:00.0: reg 18: [mem 0xf6fff000-0xf6ffffff 64bit pref]
[ 1.077246] pci 0000:02:00.0: reg 20: [mem 0xf6ff8000-0xf6ffbfff 64bit pref]
[ 1.077257] pci 0000:02:00.0: reg 30: [mem 0xf7df0000-0xf7dfffff pref]
[ 1.077317] pci 0000:02:00.0: supports D1 D2
[ 1.077318] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.077323] pci 0000:02:00.0: PME# disabled
[ 1.084587] pci 0000:00:1c.7: PCI bridge to [bus 02-02]
[ 1.084593] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 1.084599] pci 0000:00:1c.7: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.084608] pci 0000:00:1c.7: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
[ 1.084659] pci 0000:07:04.0: [1106:3044] type 0 class 0x000c00
[ 1.084675] pci 0000:07:04.0: reg 10: [mem 0xf7fff000-0xf7fff7ff]
[ 1.084684] pci 0000:07:04.0: reg 14: [io 0xec00-0xec7f]
[ 1.084746] pci 0000:07:04.0: supports D2
[ 1.084748] pci 0000:07:04.0: PME# supported from D2 D3hot D3cold
[ 1.084751] pci 0000:07:04.0: PME# disabled
[ 1.084786] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
[ 1.084789] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.084793] pci 0000:00:1e.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 1.084798] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.084800] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.084802] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.084804] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 1.084806] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
[ 1.084808] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfed8ffff] (subtractive decode)
[ 1.084832] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.085028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
[ 1.085126] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 1.085163] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[ 1.085194] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT]
[ 1.085226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT]
[ 1.085257] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR26._PRT]
[ 1.085297] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR27._PRT]
[ 1.085439] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.085637] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[ 1.085638] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.095928] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 1.095969] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 1.096007] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 1.096048] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 1.096088] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 1.096128] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 1.096168] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[ 1.096208] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 1.096291] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.096294] vgaarb: loaded
[ 1.096295] vgaarb: bridge control possible 0000:01:00.0
[ 1.096324] PCI: Using ACPI for IRQ routing
[ 1.097549] PCI: Discovered peer bus 3f
[ 1.097579] pci 0000:3f:00.0: [8086:2c51] type 0 class 0x000600
[ 1.097595] pci 0000:3f:00.1: [8086:2c81] type 0 class 0x000600
[ 1.097611] pci 0000:3f:02.0: [8086:2c90] type 0 class 0x000600
[ 1.097625] pci 0000:3f:02.1: [8086:2c91] type 0 class 0x000600
[ 1.097641] pci 0000:3f:03.0: [8086:2c98] type 0 class 0x000600
[ 1.097655] pci 0000:3f:03.1: [8086:2c99] type 0 class 0x000600
[ 1.097669] pci 0000:3f:03.4: [8086:2c9c] type 0 class 0x000600
[ 1.097684] pci 0000:3f:04.0: [8086:2ca0] type 0 class 0x000600
[ 1.097698] pci 0000:3f:04.1: [8086:2ca1] type 0 class 0x000600
[ 1.097712] pci 0000:3f:04.2: [8086:2ca2] type 0 class 0x000600
[ 1.097726] pci 0000:3f:04.3: [8086:2ca3] type 0 class 0x000600
[ 1.097741] pci 0000:3f:05.0: [8086:2ca8] type 0 class 0x000600
[ 1.097755] pci 0000:3f:05.1: [8086:2ca9] type 0 class 0x000600
[ 1.097769] pci 0000:3f:05.2: [8086:2caa] type 0 class 0x000600
[ 1.097783] pci 0000:3f:05.3: [8086:2cab] type 0 class 0x000600
[ 1.098111] PCI: pci_cache_line_size set to 64 bytes
[ 1.098197] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 1.098199] reserve RAM buffer: 00000000dfe70000 - 00000000dfffffff
[ 1.098296] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 1.098303] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
[ 1.098308] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.100600] hpet: hpet2 irq 40 for MSI
[ 1.100694] hpet: hpet3 irq 41 for MSI
[ 1.104773] hpet: hpet4 irq 42 for MSI
[ 1.108715] hpet: hpet5 irq 43 for MSI
[ 1.112725] hpet: hpet6 irq 44 for MSI
[ 1.120765] Switching to clocksource hpet
[ 1.122149] pnp: PnP ACPI init
[ 1.122159] ACPI: bus type pnp registered
[ 1.122239] pnp 00:00: [bus 00-ff]
[ 1.122241] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.122243] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.122245] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.122247] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.122248] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 1.122250] pnp 00:00: [mem 0xe0000000-0xf7ffffff window]
[ 1.122252] pnp 00:00: [mem 0xfc000000-0xfed8ffff window]
[ 1.122287] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.122295] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 1.122335] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 1.122337] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.122363] pnp 00:02: [dma 4]
[ 1.122365] pnp 00:02: [io 0x0000-0x000f]
[ 1.122366] pnp 00:02: [io 0x0081-0x0083]
[ 1.122368] pnp 00:02: [io 0x0087]
[ 1.122369] pnp 00:02: [io 0x0089-0x008b]
[ 1.122371] pnp 00:02: [io 0x008f]
[ 1.122372] pnp 00:02: [io 0x00c0-0x00df]
[ 1.122393] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.122402] pnp 00:03: [io 0x0070-0x0071]
[ 1.122407] pnp 00:03: [irq 8]
[ 1.122426] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.122433] pnp 00:04: [io 0x0061]
[ 1.122454] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 1.122462] pnp 00:05: [io 0x00f0-0x00ff]
[ 1.122467] pnp 00:05: [irq 13]
[ 1.122487] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.122659] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 1.122661] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 1.122663] pnp 00:06: [io 0x0290-0x029f]
[ 1.122706] system 00:06: [io 0x0290-0x029f] has been reserved
[ 1.122709] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.122866] pnp 00:07: [io 0x0010-0x001f]
[ 1.122868] pnp 00:07: [io 0x0022-0x003f]
[ 1.122870] pnp 00:07: [io 0x0044-0x004d]
[ 1.122871] pnp 00:07: [io 0x0050-0x005f]
[ 1.122873] pnp 00:07: [io 0x0063]
[ 1.122874] pnp 00:07: [io 0x0065]
[ 1.122875] pnp 00:07: [io 0x0067-0x006f]
[ 1.122877] pnp 00:07: [io 0x0072-0x007f]
[ 1.122878] pnp 00:07: [io 0x0080]
[ 1.122879] pnp 00:07: [io 0x0084-0x0086]
[ 1.122881] pnp 00:07: [io 0x0088]
[ 1.122882] pnp 00:07: [io 0x008c-0x008e]
[ 1.122883] pnp 00:07: [io 0x0090-0x009f]
[ 1.122885] pnp 00:07: [io 0x00a2-0x00bf]
[ 1.122886] pnp 00:07: [io 0x00e0-0x00ef]
[ 1.122888] pnp 00:07: [io 0x04d0-0x04d1]
[ 1.122889] pnp 00:07: [io 0x0800-0x087f]
[ 1.122890] pnp 00:07: [io 0xffe0-0xffdf disabled]
[ 1.122892] pnp 00:07: [io 0x0500-0x057f]
[ 1.122893] pnp 00:07: [io 0x0600-0x0607]
[ 1.122895] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[ 1.122896] pnp 00:07: [mem 0xfed20000-0xfed3ffff]
[ 1.122898] pnp 00:07: [mem 0xfed40000-0xfed8ffff]
[ 1.122955] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 1.122957] system 00:07: [io 0x0800-0x087f] has been reserved
[ 1.122959] system 00:07: [io 0x0500-0x057f] has been reserved
[ 1.122961] system 00:07: [io 0x0600-0x0607] has been reserved
[ 1.122964] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.122966] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.122968] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 1.122970] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.123031] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 1.123057] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.123101] pnp 00:09: [mem 0xffa00000-0xffbfffff]
[ 1.123103] pnp 00:09: [mem 0xffe00000-0xffffffff]
[ 1.123126] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.123163] pnp 00:0a: [mem 0xffc00000-0xffdfffff]
[ 1.123206] system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
[ 1.123208] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.123447] pnp 00:0b: [io 0x03f8-0x03ff]
[ 1.123452] pnp 00:0b: [irq 4]
[ 1.123453] pnp 00:0b: [dma 0 disabled]
[ 1.123513] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.123589] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[ 1.123591] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[ 1.123635] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.123637] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.123640] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.123665] pnp 00:0d: [io 0x0060]
[ 1.123667] pnp 00:0d: [io 0x0064]
[ 1.123671] pnp 00:0d: [irq 1]
[ 1.123700] pnp 00:0d: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 1.123745] pnp 00:0e: [mem 0xf8000000-0xfbffffff]
[ 1.123789] system 00:0e: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.123791] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.123952] pnp 00:0f: [mem 0x00000000-0x0009ffff]
[ 1.123954] pnp 00:0f: [mem 0x000c0000-0x000cffff]
[ 1.123955] pnp 00:0f: [mem 0x000e0000-0x000fffff]
[ 1.123957] pnp 00:0f: [mem 0x00100000-0xdfffffff]
[ 1.123958] pnp 00:0f: [mem 0xfed90000-0xffffffff]
[ 1.124013] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.124016] system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
[ 1.124018] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.124020] system 00:0f: [mem 0x00100000-0xdfffffff] could not be reserved
[ 1.124022] system 00:0f: [mem 0xfed90000-0xffffffff] could not be reserved
[ 1.124025] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.124142] pnp: PnP ACPI: found 16 devices
[ 1.124143] ACPI: ACPI bus type pnp unregistered
[ 1.130486] PCI: max bus depth: 1 pci_try_num: 2
[ 1.130528] pci 0000:00:1c.6: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
[ 1.130530] pci 0000:00:1c.5: BAR 14: assigned [mem 0xf0200000-0xf03fffff]
[ 1.130533] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
[ 1.130535] pci 0000:00:1c.5: BAR 13: assigned [io 0x1000-0x1fff]
[ 1.130538] pci 0000:00:1c.4: BAR 14: assigned [mem 0xf0600000-0xf07fffff]
[ 1.130540] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0800000-0xf09fffff 64bit pref]
[ 1.130542] pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x2fff]
[ 1.130545] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0a00000-0xf0bfffff]
[ 1.130547] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0c00000-0xf0dfffff 64bit pref]
[ 1.130549] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 1.130552] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 1.130554] pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
[ 1.130557] pci 0000:00:03.0: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 1.130559] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.130563] pci 0000:00:1c.0: PCI bridge to [bus 06-06]
[ 1.130565] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 1.130569] pci 0000:00:1c.0: bridge window [mem 0xf0a00000-0xf0bfffff]
[ 1.130572] pci 0000:00:1c.0: bridge window [mem 0xf0c00000-0xf0dfffff 64bit pref]
[ 1.130577] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.130579] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 1.130583] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf07fffff]
[ 1.130586] pci 0000:00:1c.4: bridge window [mem 0xf0800000-0xf09fffff 64bit pref]
[ 1.130591] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.130593] pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff]
[ 1.130597] pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf03fffff]
[ 1.130600] pci 0000:00:1c.5: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[ 1.130605] pci 0000:00:1c.6: PCI bridge to [bus 03-03]
[ 1.130607] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 1.130611] pci 0000:00:1c.6: bridge window [mem 0xf7e00000-0xf7efffff]
[ 1.130614] pci 0000:00:1c.6: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 1.130618] pci 0000:00:1c.7: PCI bridge to [bus 02-02]
[ 1.130621] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 1.130624] pci 0000:00:1c.7: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.130628] pci 0000:00:1c.7: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
[ 1.130632] pci 0000:00:1e.0: PCI bridge to [bus 07-07]
[ 1.130634] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.130638] pci 0000:00:1e.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 1.130653] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.130656] pci 0000:00:03.0: setting latency timer to 64
[ 1.130660] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 1.130666] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.130669] pci 0000:00:1c.0: setting latency timer to 64
[ 1.130673] pci 0000:00:1c.4: enabling device (0104 -> 0107)
[ 1.130676] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.130679] pci 0000:00:1c.4: setting latency timer to 64
[ 1.130683] pci 0000:00:1c.5: enabling device (0104 -> 0107)
[ 1.130686] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.130689] pci 0000:00:1c.5: setting latency timer to 64
[ 1.130698] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.130701] pci 0000:00:1c.6: setting latency timer to 64
[ 1.130709] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.130712] pci 0000:00:1c.7: setting latency timer to 64
[ 1.130716] pci 0000:00:1e.0: setting latency timer to 64
[ 1.130719] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.130721] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.130722] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.130724] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.130726] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff]
[ 1.130727] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfed8ffff]
[ 1.130729] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 1.130730] pci_bus 0000:01: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 1.130732] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.130734] pci_bus 0000:06: resource 0 [io 0x3000-0x3fff]
[ 1.130735] pci_bus 0000:06: resource 1 [mem 0xf0a00000-0xf0bfffff]
[ 1.130737] pci_bus 0000:06: resource 2 [mem 0xf0c00000-0xf0dfffff 64bit pref]
[ 1.130739] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 1.130740] pci_bus 0000:05: resource 1 [mem 0xf0600000-0xf07fffff]
[ 1.130742] pci_bus 0000:05: resource 2 [mem 0xf0800000-0xf09fffff 64bit pref]
[ 1.130743] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 1.130745] pci_bus 0000:04: resource 1 [mem 0xf0200000-0xf03fffff]
[ 1.130747] pci_bus 0000:04: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[ 1.130748] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 1.130750] pci_bus 0000:03: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 1.130751] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 1.130753] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 1.130755] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 1.130756] pci_bus 0000:02: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
[ 1.130758] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
[ 1.130759] pci_bus 0000:07: resource 1 [mem 0xf7f00000-0xf7ffffff]
[ 1.130761] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 1.130763] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 1.130764] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.130766] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.130767] pci_bus 0000:07: resource 8 [mem 0xe0000000-0xf7ffffff]
[ 1.130769] pci_bus 0000:07: resource 9 [mem 0xfc000000-0xfed8ffff]
[ 1.130771] pci_bus 0000:3f: resource 0 [io 0x0000-0xffff]
[ 1.130772] pci_bus 0000:3f: resource 1 [mem 0x00000000-0xfffffffff]
[ 1.130851] NET: Registered protocol family 2
[ 1.131156] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.132167] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.134329] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.134584] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.134585] TCP reno registered
[ 1.134605] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.134714] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.134924] NET: Registered protocol family 1
[ 1.135006] pci 0000:01:00.0: Boot video device
[ 1.135037] PCI: CLS 32 bytes, default 64
[ 1.135071] Unpacking initramfs...
[ 1.315362] Freeing initrd memory: 10592k freed
[ 1.316691] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.316694] Placing 64MB software IO TLB between ffff8800dbe5e000 - ffff8800dfe5e000
[ 1.316696] software IO TLB at phys 0xdbe5e000 - 0xdfe5e000
[ 1.317320] audit: initializing netlink socket (disabled)
[ 1.317328] type=2000 audit(1331088415.000:1): initialized
[ 1.346306] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.381537] VFS: Disk quotas dquot_6.5.2
[ 1.381569] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.381636] msgmni has been set to 32162
[ 1.381779] alg: No test for stdrng (krng)
[ 1.381810] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.381812] io scheduler noop registered
[ 1.381814] io scheduler deadline registered
[ 1.381839] io scheduler cfq registered (default)
[ 1.382194] intel_idle: MWAIT substates: 0x1120
[ 1.382205] intel_idle: v0.4 model 0x1E
[ 1.382206] intel_idle: lapic_timer_reliable_states 0x2
[ 1.382269] ERST: Table is not found!
[ 1.382270] GHES: HEST is not enabled!
[ 1.382317] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.402690] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.593314] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.636967] Linux agpgart interface v0.103
[ 1.637088] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.637090] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.637667] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.637762] mousedev: PS/2 mouse device common for all mice
[ 1.637795] rtc_cmos 00:03: RTC can wake from S4
[ 1.637899] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.637924] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.638112] cpuidle: using governor ladder
[ 1.638393] cpuidle: using governor menu
[ 1.638542] TCP cubic registered
[ 1.639992] NET: Registered protocol family 10
[ 1.641320] Mobile IPv6
[ 1.641322] NET: Registered protocol family 17
[ 1.641324] Registering the dns_resolver key type
[ 1.641541] PM: Hibernation image not present or could not be loaded.
[ 1.641549] registered taskstats version 1
[ 1.657438] rtc_cmos 00:03: setting system clock to 2012-03-07 02:46:56 UTC (1331088416)
[ 1.657469] Initializing network drop monitor service
[ 1.659196] Freeing unused kernel memory: 568k freed
[ 1.659253] Write protecting the kernel read-only data: 6144k
[ 1.662688] Freeing unused kernel memory: 712k freed
[ 1.665494] Freeing unused kernel memory: 684k freed
[ 1.675150] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.681524] udevd[78]: starting version 175
[ 1.693109] usbcore: registered new interface driver usbfs
[ 1.693132] usbcore: registered new interface driver hub
[ 1.694108] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.694122] usbcore: registered new device driver usb
[ 1.694127] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.694159] r8169 0000:02:00.0: setting latency timer to 64
[ 1.694213] r8169 0000:02:00.0: irq 45 for MSI/MSI-X
[ 1.694635] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc9000181e000, bc:ae:c5:3e:d5:3d, XID 083000c0 IRQ 45
[ 1.694639] r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.694642] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.694663] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.694679] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.694684] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.694711] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.694741] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.694762] SCSI subsystem initialized
[ 1.698660] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[ 1.702094] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7bfe000
[ 1.707230] libata version 3.00 loaded.
[ 1.713890] firewire_ohci 0000:07:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.716769] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.716792] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.716795] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.716797] usb usb1: Product: EHCI Host Controller
[ 1.716799] usb usb1: Manufacturer: Linux 3.2.0-1-amd64 ehci_hcd
[ 1.716801] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.716964] hub 1-0:1.0: USB hub found
[ 1.716968] hub 1-0:1.0: 2 ports detected
[ 1.717048] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.717061] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.717063] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.717070] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.717094] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.720989] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[ 1.721007] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7bfd000
[ 1.729763] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.729783] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 1.730012] scsi0 : pata_jmicron
[ 1.730342] scsi1 : pata_jmicron
[ 1.730716] ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19
[ 1.730718] ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 19
[ 1.741029] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.741054] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.741056] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.741058] usb usb2: Product: EHCI Host Controller
[ 1.741059] usb usb2: Manufacturer: Linux 3.2.0-1-amd64 ehci_hcd
[ 1.741060] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.741311] hub 2-0:1.0: USB hub found
[ 1.741320] hub 2-0:1.0: 2 ports detected
[ 1.741406] ahci 0000:00:1f.2: version 3.0
[ 1.741418] ahci 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 1.741643] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 1.741668] ahci: SSS flag set, parallel bus scan disabled
[ 1.757039] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.757042] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems sxs apst
[ 1.757046] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.769059] firewire_ohci: Added fw-ohci device 0000:07:04.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[ 1.801560] scsi2 : ahci
[ 1.801872] scsi3 : ahci
[ 1.802163] scsi4 : ahci
[ 1.802447] scsi5 : ahci
[ 1.802699] scsi6 : ahci
[ 1.802897] scsi7 : ahci
[ 1.803120] ata3: SATA max UDMA/133 abar m2048@0xf7bf7000 port 0xf7bf7100 irq 46
[ 1.803122] ata4: SATA max UDMA/133 abar m2048@0xf7bf7000 port 0xf7bf7180 irq 46
[ 1.803125] ata5: SATA max UDMA/133 abar m2048@0xf7bf7000 port 0xf7bf7200 irq 46
[ 1.803127] ata6: SATA max UDMA/133 abar m2048@0xf7bf7000 port 0xf7bf7280 irq 46
[ 1.803129] ata7: SATA max UDMA/133 abar m2048@0xf7bf7000 port 0xf7bf7300 irq 46
[ 1.803131] ata8: SATA max UDMA/133 abar m2048@0xf7bf7000 port 0xf7bf7380 irq 46
[ 1.803149] ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.817029] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.817036] ahci 0000:03:00.0: flags: 64bit ncq led clo pmp pio
[ 1.817044] ahci 0000:03:00.0: setting latency timer to 64
[ 1.817414] scsi8 : ahci
[ 1.817591] scsi9 : ahci
[ 1.817672] ata9: SATA max UDMA/133 abar m8192@0xf7efa000 port 0xf7efa100 irq 18
[ 1.817675] ata10: SATA max UDMA/133 abar m8192@0xf7efa000 port 0xf7efa180 irq 18
[ 2.028999] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 2.136942] ata9: SATA link down (SStatus 0 SControl 300)
[ 2.137025] ata10: SATA link down (SStatus 0 SControl 300)
[ 2.161260] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.161266] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.161819] hub 1-1:1.0: USB hub found
[ 2.161986] hub 1-1:1.0: 6 ports detected
[ 2.269069] firewire_core: created device fw0: GUID 001fc600000a07ef, S400
[ 2.272811] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.292770] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.293090] ata3.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102M3, max UDMA/133
[ 2.293097] ata3.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.293482] ata3.00: configured for UDMA/133
[ 2.293846] scsi 2:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
[ 2.316806] Refined TSC clocksource calibration: 2942.463 MHz.
[ 2.316813] Switching to clocksource tsc
[ 2.405255] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.405261] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.405795] hub 2-1:1.0: USB hub found
[ 2.405975] hub 2-1:1.0: 8 ports detected
[ 2.677013] usb 2-1.7: new low-speed USB device number 3 using ehci_hcd
[ 2.775261] usb 2-1.7: New USB device found, idVendor=046d, idProduct=c00e
[ 2.775267] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.775271] usb 2-1.7: Product: USB-PS/2 Optical Mouse
[ 2.775275] usb 2-1.7: Manufacturer: Logitech
[ 2.784882] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.813650] ata4.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[ 2.813656] ata4.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.852820] usb 2-1.8: new full-speed USB device number 4 using ehci_hcd
[ 2.855712] ata4.00: configured for UDMA/133
[ 2.855881] scsi 3:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
[ 2.952519] usb 2-1.8: New USB device found, idVendor=056a, idProduct=00b1
[ 2.952525] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.952529] usb 2-1.8: Product: PTZ-630
[ 2.952532] usb 2-1.8: Manufacturer: Tablet
[ 2.958641] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input1
[ 2.958952] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.7/input0
[ 2.959004] usbcore: registered new interface driver usbhid
[ 2.959008] usbhid: USB HID core driver
[ 3.172746] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.492779] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.812778] ata7: SATA link down (SStatus 0 SControl 300)
[ 4.132835] ata8: SATA link down (SStatus 0 SControl 300)
[ 4.136634] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 4.136648] sd 3:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 4.136744] sd 3:0:0:0: [sdb] Write Protect is off
[ 4.136746] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.136768] sd 2:0:0:0: [sda] Write Protect is off
[ 4.136770] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.136774] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.136836] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.139684] sda: sda1 sda2
[ 4.140262] sd 2:0:0:0: [sda] Attached SCSI disk
[ 4.190101] sdb: sdb1 sdb2
[ 4.191197] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 4.772521] device-mapper: uevent: version 1.0.3
[ 4.772567] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 5.072016] PM: Starting manual resume from disk
[ 5.072019] PM: Hibernation image partition 254:1 present
[ 5.072020] PM: Looking for hibernation image.
[ 5.074754] PM: Image not found (code -22)
[ 5.074758] PM: Hibernation image not present or could not be loaded.
[ 5.089722] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 5.413366] udevd[378]: starting version 175
[ 5.446588] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 5.446593] ACPI: Power Button [PWRB]
[ 5.446653] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.446656] ACPI: Power Button [PWRF]
[ 5.451667] [drm] Initialized drm 1.1.0 20060810
[ 5.460566] iTCO_vendor_support: vendor-support=0
[ 5.462197] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 5.462291] iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0860)
[ 5.462444] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.462474] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.466056] EDAC MC: Ver: 2.1.0
[ 5.466414] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 5.467973] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0
[ 5.467994] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED)
[ 5.468001] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 5.470579] [drm] radeon kernel modesetting enabled.
[ 5.470672] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.470690] radeon 0000:01:00.0: setting latency timer to 64
[ 5.470869] [drm] initializing kernel modesetting (CYPRESS 0x1002:0x6899 0x1458:0x21E4).
[ 5.470902] [drm] register mmio base: 0xF7CC0000
[ 5.470919] [drm] register mmio size: 131072
[ 5.471127] ATOM BIOS: GV
[ 5.471154] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 5.471156] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[ 5.471160] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 5.471162] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 5.471163] [drm] RAM width 256bits DDR
[ 5.471195] [TTM] Zone kernel: Available graphics memory: 8234640 kiB.
[ 5.471196] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 5.471197] [TTM] Initializing pool allocator.
[ 5.471212] [drm] radeon: 1024M of VRAM memory ready
[ 5.471214] [drm] radeon: 512M of GTT memory ready.
[ 5.471222] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.471223] [drm] Driver supports precise vblank timestamp query.
[ 5.471268] radeon 0000:01:00.0: irq 47 for MSI/MSI-X
[ 5.471272] radeon 0000:01:00.0: radeon: using MSI.
[ 5.471301] [drm] radeon: irq initialized.
[ 5.471304] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 5.472008] [drm] Loading CYPRESS Microcode
[ 5.474095] input: Wacom Intuos3 6x8 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input5
[ 5.474469] usbcore: registered new interface driver wacom
[ 5.474471] wacom: v1.53:USB Wacom tablet driver
[ 5.476825] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.476874] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 5.476894] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 5.477302] ATK0110 ATK0110:00: EC enabled
[ 5.482829] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 5.482963] radeon 0000:01:00.0: WB enabled
[ 5.499458] [drm] ring test succeeded in 1 usecs
[ 5.499534] [drm] radeon: ib pool ready.
[ 5.499629] [drm] ib test succeeded in 0 usecs
[ 5.500055] [drm] Radeon Display Connectors
[ 5.500056] [drm] Connector 0:
[ 5.500057] [drm] DisplayPort
[ 5.500058] [drm] HPD4
[ 5.500059] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 5.500061] [drm] Encoders:
[ 5.500062] [drm] DFP1: INTERNAL_UNIPHY2
[ 5.500063] [drm] Connector 1:
[ 5.500064] [drm] HDMI-A
[ 5.500065] [drm] HPD5
[ 5.500066] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 5.500067] [drm] Encoders:
[ 5.500068] [drm] DFP2: INTERNAL_UNIPHY2
[ 5.500069] [drm] Connector 2:
[ 5.500070] [drm] DVI-I
[ 5.500071] [drm] HPD1
[ 5.500072] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 5.500073] [drm] Encoders:
[ 5.500074] [drm] DFP3: INTERNAL_UNIPHY1
[ 5.500076] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 5.500077] [drm] Connector 3:
[ 5.500078] [drm] DVI-I
[ 5.500078] [drm] HPD6
[ 5.500080] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 5.500081] [drm] Encoders:
[ 5.500082] [drm] DFP4: INTERNAL_UNIPHY
[ 5.500083] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 5.500107] [drm] Internal thermal controller with fan control
[ 5.500137] [drm] radeon: power management initialized
[ 5.592186] [drm] fb mappable at 0xE0142000
[ 5.592188] [drm] vram apper at 0xE0000000
[ 5.592189] [drm] size 7680000
[ 5.592190] [drm] fb depth is 24
[ 5.592191] [drm] pitch is 6400
[ 5.592284] fbcon: radeondrmfb (fb0) is primary device
[ 6.023558] Console: switching to colour frame buffer device 200x75
[ 6.029329] fb0: radeondrmfb frame buffer device
[ 6.029330] drm: registered panic notifier
[ 6.029340] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[ 6.029419] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.029463] snd_hda_intel 0000:01:00.1: irq 49 for MSI/MSI-X
[ 6.029483] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 6.048343] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 6.048427] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input6
[ 6.346959] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 6.359003] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 6.375202] loop: module loaded
[ 6.890488] Adding 2097148k swap on /dev/mapper/VGSeagate1500-LVSeagateSwap. Priority:-1 extents:1 across:2097148k
[ 7.011094] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 7.025483] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 7.231472] RPC: Registered named UNIX socket transport module.
[ 7.231474] RPC: Registered udp transport module.
[ 7.231476] RPC: Registered tcp transport module.
[ 7.231477] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.237816] FS-Cache: Loaded
[ 7.244852] FS-Cache: Netfs 'nfs' registered for caching
[ 7.249008] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 7.301426] brd: module loaded
[ 7.376489] fuse init (API version 7.17)
[ 7.541408] r8169 0000:02:00.0: eth0: link down
[ 7.541413] r8169 0000:02:00.0: eth0: link down
[ 7.542429] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.249741] r8169 0000:02:00.0: eth0: link up
[ 9.250743] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.320645] eth0: no IPv6 routers present
[ 439.406290] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 1807
board_vendor: ASUSTeK Computer INC.
board_name: P7P55D
board_version: Rev 1.xx
** Loaded modules:
fuse
ext2
brd
nfsd
nfs
lockd
fscache
auth_rpcgss
nfs_acl
sunrpc
loop
firewire_sbp2
snd_hda_codec_hdmi
snd_hda_codec_via
joydev
snd_hda_intel
snd_hda_codec
snd_seq_midi
wacom
snd_rawmidi
snd_hwdep
snd_pcm_oss
radeon
snd_seq_midi_event
i7core_edac
snd_mixer_oss
snd_seq
evdev
pcspkr
edac_core
i2c_i801
iTCO_wdt
iTCO_vendor_support
snd_pcm
snd_seq_device
ttm
snd_timer
drm_kms_helper
asus_atk0110
drm
snd
i2c_algo_bit
button
i2c_core
soundcore
power_supply
snd_page_alloc
processor
thermal_sys
ext4
crc16
jbd2
mbcache
dm_mod
sd_mod
crc_t10dif
ata_generic
usbhid
hid
pata_jmicron
firewire_ohci
firewire_core
crc_itu_t
ahci
libahci
libata
ehci_hcd
scsi_mod
r8169
mii
usbcore
usb_common
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet static
address 192.168.168.13
netmask 255.255.255.0
network 192.168.168.0
broadcast 192.168.168.255
gateway 192.168.168.1
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 80.58.32.33
dns-search battleship
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether bc:ae:c5:3e:d5:3d brd ff:ff:ff:ff:ff:ff
inet 192.168.168.13/24 brd 192.168.168.255 scope global eth0
inet6 fe80::beae:c5ff:fe3e:d53d/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 16837 72 0 0 0 0 0 0 16837 72 0 0 0 0 0 0
eth0: 25316549 24386 0 0 0 0 0 0 1942962 17815 0 0 0 0 0 0
*** Protocol statistics:
Ip:
22731 total packets received
0 forwarded
0 incoming packets discarded
22731 incoming packets delivered
17875 requests sent out
72 dropped because of missing route
Icmp:
3 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 3
6 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 6
IcmpMsg:
InType3: 3
OutType3: 6
Tcp:
170 active connections openings
1 passive connection openings
1 failed connection attempts
3 connection resets received
8 connections established
22110 segments received
17248 segments send out
0 segments retransmited
0 bad segments received.
8 resets sent
Udp:
612 packets received
6 packets to unknown port received.
0 packet receive errors
621 packets sent
UdpLite:
TcpExt:
46 TCP sockets finished time wait in fast timer
4271 delayed acks sent
Quick ack mode was activated 1 times
234 packets directly queued to recvmsg prequeue.
293207 bytes directly received in process context from prequeue
15695 packet headers predicted
193 packets header predicted and directly queued to user
363 acknowledgments not containing data payload received
1826 predicted acknowledgments
1 DSACKs sent for old packets
2 connections reset due to unexpected data
3 connections reset due to early user close
IpExt:
InOctets: 24902280
OutOctets: 1709954
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d131] (rev 11)
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root Port 1 [8086:d138] (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f7c00000-f7cfffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:08.0 System peripheral [0880]: Intel Corporation Core Processor System Management Registers [8086:d155] (rev 11)
Subsystem: Device [0043:0083]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore and Scratchpad Registers [8086:d156] (rev 11)
Subsystem: Device [0043:0083]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:08.2 System peripheral [0880]: Intel Corporation Core Processor System Control and Status Registers [8086:d157] (rev 11)
Subsystem: Device [0043:0083]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:08.3 System peripheral [0880]: Intel Corporation Core Processor Miscellaneous Registers [8086:d158] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.0 System peripheral [0880]: Intel Corporation Core Processor QPI Link [8086:d150] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.1 System peripheral [0880]: Intel Corporation Core Processor QPI Routing and Protocol Registers [8086:d151] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7bfe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06)
Subsystem: ASUSTeK Computer Inc. Device [1043:8375]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f7bf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0a00000-f0bfffff
Prefetchable memory behind bridge: 00000000f0c00000-00000000f0dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0600000-f07fffff
Prefetchable memory behind bridge: 00000000f0800000-00000000f09fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 [8086:3b4c] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f0200000-f03fffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.6 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 [8086:3b4e] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7e00000-f7efffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.7 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 8 [8086:3b50] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f7d00000-f7dfffff
Prefetchable memory behind bridge: 00000000f6f00000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7bfd000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a6) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7f00000-f7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 5 Series Chipset LPC Interface Controller [8086:3b02] (rev 06)
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b22] (rev 06) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 46
Region 0: I/O ports at a880 [size=8]
Region 1: I/O ports at a800 [size=4]
Region 2: I/O ports at a480 [size=8]
Region 3: I/O ports at a400 [size=4]
Region 4: I/O ports at a080 [size=32]
Region 5: Memory at f7bf7000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06)
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7bfc000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at ffe0 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Cypress [Radeon HD 5800 Series] [1002:6899] (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device [1458:21e4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at f7cc0000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at b000 [size=256]
Expansion ROM at f7ca0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
01:00.1 Audio device [0403]: ATI Technologies Inc Cypress HDMI Audio [Radeon HD 5800 Series] [1002:aa50]
Subsystem: Giga-byte Technology Device [1458:aa50]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 49
Region 0: Memory at f7cfc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard [1043:83a3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 45
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at f6fff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f6ff8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at f7df0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 5: Memory at f7efa000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
03:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
07:04.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. M4A series motherboard [1043:81fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f7fff000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at ec00 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
3f:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers [8086:2c51] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2c81] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2c90] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: i7core_edac
3f:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2c91] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:03.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller [8086:2c98] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:03.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder [8086:2c99] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:03.4 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Test Registers [8086:2c9c] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:04.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers [8086:2ca0] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:04.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers [8086:2ca1] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:04.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers [8086:2ca2] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:04.3 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers [8086:2ca3] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:05.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers [8086:2ca8] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:05.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers [8086:2ca9] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:05.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers [8086:2caa] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:05.3 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers [8086:2cab] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 003: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel Mouse
Bus 002 Device 004: ID 056a:00b1 Wacom Co., Ltd Intuos3 6x18
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.101
ii kmod 6-1
ii linux-base 3.5
ii module-init-tools 6-1
Versions of packages linux-image-3.2.0-1-amd64 recommends:
ii firmware-linux-free 3
Versions of packages linux-image-3.2.0-1-amd64 suggests:
pn grub-pc 1.99-17
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux 0.35
pn firmware-linux-nonfree 0.35
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink 0.35
pn firmware-realtek 0.35
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-1-amd64/postinst/depmod-error-initrd-3.2.0-1-amd64: false
linux-image-3.2.0-1-amd64/postinst/missing-firmware-3.2.0-1-amd64:
linux-image-3.2.0-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-1-amd64/prerm/removing-running-kernel-3.2.0-1-amd64: true
--- End Message ---